Interconnected CoFe2O4-Polypyrrole Nanotubes as Anode Materials for High Performance Sodium Ion Batteries

Progress and Prospect of Bimetallic Oxides for Sodium-Ion Batteries: Synthesis, Mechanism, and Optimization Strategy

Sodium-ion batteries (SIBs) are considered as an alternative to and even replacement of lithium-ion batteries in the near future in order to address the energy crisis and scarcity of lithium resources due to the wide distribution and abundance of sodium resources on the earth. The exploration and development of high-performance anode materials are critical to the practical applications of advanced SIBs. Among various anode materials, bimetallic oxides (BMOs) have attracted special research attention because of their abundance, easy access, rich redox reactions, enhanced capacity and satisfactory cycling stability. Although many BMO anode materials have been reported as anode materials in SIBs, very limited studies summarized the progress and prospect of BMOs in practical applications of SIBs. In this review, recent progress and challenges of BMO anode materials for SIBs have been comprehensively summarized and discussed. First, the preparation methods and sodium storage mechanisms of BMOs are discussed. Then, the challenges, optimization strategies, and sodium storage performance of BMO anode materials have been reviewed and summarized. Finally, the prospects and future research directions of BMOs in SIBs have been proposed. This review aims to provide insight into the efficient design and optimization of BMO anode materials for high-performance SIBs.

Synergy Between Surface Confinement and Heterointerfacial Regulations with Fast Electron/Ion Migration in InSe-PPy for Sodium-Ion Storage

Layered indium selenide (InSe) is a new 2D semiconductor material with high carrier mobility, widely adjustable bandgap, and high ductility. However, its ion storage behavior and related electrochemical reaction mechanism are rarely reported. In this study, InSe nanoflakes encapsulated in conductive polypyrrole (InSe@PPy) are designed in consideration of restraining the severe volume change in the electrochemical reaction and increasing conductivity via in situ chemical oxidation polymerization. Density functional theory calculations demonstrate that the construction of heterostructure can generate an internal electric field to accelerate electron transfer via additional driving forces, offering synergistically enhanced structural stability, electrical conductivity, and Na+ diffusion process. The resulting InSe@PPy composite shows outstanding electrochemical performance in the sodium ion batteries system, achieving a high reversible capacity of 336.4 mA h g-1 after 500 cycles at 1 A g-1 and a long-term cyclic stability with capacity of 274.4 mA h g-1 after 2800 cycles at 5 A g-1 . In particular, the investigation of capacity fluctuation within the first cycling reveals the alternating significance of intercalation and conversion reactions and evanescent alloying reaction. The combined reaction mechanism of insertion, conversion, and alloying of InSe@PPy is revealed by in situ X-ray diffraction, ex situ electrochemical impedance spectroscopy, and transmission electron microscopy.

Chemical synthesis of complex oxide thin films and freestanding membranes

Oxides offer unique physical and chemical properties that inspire rapid advances in materials chemistry to design and nanoengineer materials compositions and implement them in devices for a myriad of applications. Chemical deposition methods are gaining attention as a versatile approach to develop complex oxide thin films and nanostructures by properly selecting compatible chemical precursors and designing an accurate cost-effective thermal treatment. Here, upon describing the basics of chemical solution deposition (CSD) and atomic layer deposition (ALD), some examples of the growth of chemically-deposited functional complex oxide films that can have applications in energy and electronics are discussed. To go one step further, the suitability of these techniques is presented to prepare freestanding complex oxides which can notably broaden their applications. Finally, perspectives on the use of chemical methods to prepare future materials are given.

Molten salt synthesis of disordered spinel CoFe2O4 with improved electrochemical performance for sodium-ion batteries

Sodium-ion (Na-ion) batteries are currently being investigated as an attractive substitute for lithium-ion (Li-ion) batteries in large energy storage systems because of the more abundant and less expensive supply of Na than Li. However, the reversible capacity of Na-ions is limited because Na possesses a large ionic radius and has a higher standard electrode potential than that of Li, making it challenging to obtain electrode materials that are capable of storing large quantities of Na-ions. This study investigates the potential of CoFe2O4 synthesised via the molten salt method as an anode for Na-ion batteries. The obtained phase structure, morphology and charge and discharge properties of CoFe2O4 are thoroughly assessed. The synthesised CoFe2O4 has an octahedron morphology, with a particle size in the range of 1.1-3.6 μm and a crystallite size of ∼26 nm. Moreover, the CoFe2O4 (M800) electrodes can deliver a high discharge capacity of 839 mA h g-1 in the first cycle at a current density of 0.1 A g-1, reasonable cyclability of 98 mA h g-1 after 100 cycles and coulombic efficiency of ∼99%. The improved electrochemical performances of CoFe2O4 can be due to Na-ion-pathway shortening, wherein the homogeneity and small size of CoFe2O4 particles may enhance the Na-ion transportation. Therefore, this simple synthetic approach using molten salt favours the Na-ion diffusion and electron transport to a great extent and maximises the utilisation of CoFe2O4 as a potential anode material for Na-ion batteries.

Facile preparation of a cost-effective platform based on ZnFe2O4 nanomaterials for electrochemical cell detection

Circulating tumor cells (CTCs) are important tumor markers that indicate early metastasis, tumor recurrence, and treatment efficacy. To identify and separate these cells from the blood, new nanomaterials need to be developed. The present study explored the potential application of ZnFe₂O₄ magnetic nanoparticles in capturing CTCs with cell surface markers. Folic acid was coupled to L-cysteine-capped ZnFe₂O₄ nanoparticles (ZC) to provide binding sites on ZnFe₂O₄ nanoparticles for the recognition of folate bioreceptors, which are highly expressed in MCF-7 breast cancer cells. The cytotoxicity of ZnFe₂O₄ nanoparticles and ZC against MCF-7 was analyzed with the MTT assay. After 24 h of incubation, there were IC50 values of 702.6 and 805.5 µg/mL for ZnFe₂O₄ and ZC, respectively. However, after 48 h of incubation, IC50 values of ZnFe₂O₄ and ZC were reduced to 267.3 and 389.7 µg/mL, respectively. The cell quantification was conducted with magnetically collected cells placed on a glassy carbon electrode, and the differential pulse voltammetry (DPV) responses were analyzed. This cost-effective ZnFe₂O₄-based biosensing platform allowed cancer cell detection with a limit of detection of 3 cells/mL, ranging from 25 to 10⁴ cells/mL. In future, these functionalized zinc ferrites may be used in electrochemical cell detection and targeted cancer therapy.

Polypyrrole Modified MoS2 Nanorod Composites as Durable Pseudocapacitive Anode Materials for Sodium-Ion Batteries

As a typical two-dimensional layered metal sulfide, MoS₂ has a high theoretical capacity and large layer spacing, which is beneficial for ion transport. Herein, a facile polymerization method is employed to synthesize polypyrrole (PPy) nanotubes, followed by a hydrothermal method to obtain flower-rod-shaped MoS₂/PPy (FR-MoS₂/PPy) composites. The FR-MoS₂/PPy achieves outstanding electrochemical performance as a sodium-ion battery anode. After 60 cycles under 100 mA g⁻¹, the FR-MoS₂/PPy can maintain a capacity of 431.9 mAh g⁻¹. As for rate performance, when the current densities range from 0.1 to 2 A g⁻¹, the capacities only reduce from 489.7 to 363.2 mAh g⁻¹. The excellent performance comes from a high specific surface area provided by the unique structure and the synergistic effect between the components. Additionally, the introduction of conductive PPy improves the conductivity of the material and the internal hollow structure relieves the volume expansion. In addition, kinetic calculations show that the composite material has a high sodium-ion transmission rate, and the external pseudocapacitance behavior can also significantly improve its electrochemical performance. This method provides a new idea for the development of advanced high-capacity anode materials for sodium-ion batteries.

Bendable Polycrystalline and Magnetic CoFe2O4 Membranes by Chemical Methods

The preparation and manipulation of crystalline yet bendable functional complex oxide membranes has been a long-standing issue for a myriad of applications, in particular, for flexible electronics. Here, we investigate the viability to prepare magnetic and crystalline CoFe₂O₄ (CFO) membranes by means of the Sr₃Al₂O₆ (SAO) sacrificial layer approach using chemical deposition techniques. Meticulous chemical and structural study of the SAO surface and SAO/CFO interface properties have allowed us to identify the formation of an amorphous SAO capping layer and carbonates upon air exposure, which dictate the crystalline quality of the subsequent CFO film growth. Vacuum annealing at 800 °C of SAO films promotes the elimination of the surface carbonates and the reconstruction of the SAO surface crystallinity. Ex-situ atomic layer deposition of CFO films at 250 °C on air-exposed SAO offers the opportunity to avoid high-temperature growth while achieving polycrystalline CFO films that can be successfully transferred to a polymer support preserving the magnetic properties under bending. Float on and transfer provides an alternative route to prepare freestanding and wrinkle-free CFO membrane films. The advances and challenges presented in this work are expected to help increase the capabilities to grow different oxide compositions and heterostructures of freestanding films and their range of functional properties.

MXene-based cytosensor for the detection of HER2-positive cancer cells using CoFe2O4@Ag magnetic nanohybrids conjugated to the HB5 aptamer

MXenes are a new class of conductive two-dimensional material which have received growing attention in biosensing for their significant surface area and unique surface chemistry. Here, gold electrodes were modified with MXene nanosheets of about 2 nm thickness and 1.5 μm lateral size for the electrochemical detection of tumor cells. An HB5 aptamer with high selectivity for HER-2 positive cells was immobilized on the MXene layers via electrostatic interactions. To minimize electrode biofouling with blood matrix, magnetic separation of HER-2 positive circulating tumor cells was carried out using CoFe₂O₄@Ag magnetic nanohybrids bonded to the HB5. The formation of sandwich-like structures between the magnetically captured cells and the functionalized MXene electrodes effectively shields the electron transfer of a redox probe, enabling quantitative cell detection using the change in current. This label-free MXene-based cytosensor platform yielded a wide linear range of 10²-10⁶ cells/mL, low detection limit of 47 cells/mL, and good sensitivity and selectivity in the detection of HER2-posetive cells in blood samples. The presented aptacytosensor demonstrates the great potential of using CoFe₂O₄@Ag magnetic nanohybrids and MXenes to monitor cancer progression via circulating tumor cells in blood at low cost.

Fast and Efficient Removal of Uranium onto a Magnetic Hydroxyapatite Composite: Mechanism and Process Evaluation

The exploration and rational design of easily separable and highly efficient sorbents with satisfactory capability of extracting radioactive uranium (U)-containing compound(s) are of paramount significance. In this study, a novel magnetic hydroxyapatite (HAP) composite (HAP@ CoFe2O4), which was coupled with cobalt ferrite (CoFe2O4), was rationally designed for uranium(VI) removal through a facile hydrothermal process. The U(VI) ions were rapidly removed using HAP@ CoFe2O4 within a short time (i.e., 10 min), and a maximum U(VI) removal efficiency of 93.7% was achieved. The maximum adsorption capacity (Qmax) of the HAP@CoFe2O4 was 338 mg/g, which demonstrated the potential of as-prepared HAP@CoFe2O4 in the purification of U(VI) ions from nuclear effluents. Autunite [Ca(UO2)2(PO4)2(H2O)6] was the main crystalline phase to retain uranium, wherein U(VI) was effectively extracted and immobilized in terms of a relatively stable mineral. Furthermore, the reacted HAP@CoFe2O4 can be magnetically recycled. The results of this study reveal that the suggested process using HAP@CoFe2O4 is a promising approach for the removal and immobilization of U(VI) released from nuclear effluents.

Improved Cycling Performance of P2-Na0.67Ni0.33Mn0.67O2 Based on Sn Substitution Combined with Polypyrrole Coating

P2-Na_0.67Ni_0.33Mn_0.67O₂ presents high working voltage with a theoretical capacity of 173 mAh g^-1. However, the lattice oxygen on the particle surface participates in the redox reactions when the material is charged over 4.22 V. The resulting oxidized oxygen aggravates the electrolyte decomposition and transition metal dissolution, which cause severe capacity decay. The commonly reported cation substitution methods enhance the cycle stability by suppressing the high voltage plateau but lead to lower average working voltage and reduced capacity. Herein, we stabilized the lattice oxygen by a small amount of Sn substitution based on the strong Sn-O bond without sacrificing the high voltage performance and further protected the particle surface by polypyrrole (PPy) coating. The obtained Na_0.67Ni_0.33Mn_0.63Sn_0.04O₂@PPy (3.3 wt %) composite showed excellent cycling stability with a reversible capacity of 137.6 (10) and 120.0 mAh g^-1 (100 mA g^-1) with a capacity retention of 95% (10 mA g^-1, 50 cycles) and 82.5% (100 mA g^-1, 100 cycles), respectively. The present work indicates that slight Sn substitution combined with PPy coating could be an effective approach to achieving superior cycling stability for high-voltage layered transition metal oxides.

New rationally designed hybrid polypyrrole@SnCoS4 as an efficient anode for lithium-ion batteries

Three active materials containing binary metal sulfide (SnCoS₄) were obtained via a simple hydrothermal method. Also, the electrochemical performance of the anode materials was investigated in a lithium-ion half-cell.

Spongy p-Toluenesulfonic Acid-doped Polypyrrole with Extraordinary Rate Performance as Durable Anodes of Sodium-Ion Batteries at Different Temperatures

Sodium-ion batteries (SIBs) have potential as an energy storage system because they have similar electrochemical properties as lithium-ion batteries, abundant resource reserves, and extremely high safety performance. Compared with traditional graphite materials, conductive polymers are more suitable as an anode electrode material for SIBs. In this study, a simple and scalable approach has been used to synthesize p-toluenesulfonic acid-doped polypyrrole (p-TSA-PPy). The as-obtained material showed remarkable rate capacities and cyclability. At room temperature (25 °C), its discharge capacities could reach 185, 162, and 135 mAh g^-1 under 10, 30, and 50 C rates after 250 cycles, respectively. More importantly, the capacity of the p-TSA-PPy could still be maintained at 120.5 mAh g^-1 even at the 2000th cycle at 10 C. In addition, it achieves attractive electrochemical performance at different temperatures (0 and 50 °C).

Gold Nanoparticle Embedded on a Reduced Graphene Oxide/polypyrrole Nanocomposite: Voltammetric Sensing of Furazolidone and Flutamide

A new electrochemical sensor has been constructed based on the in situ preparation of gold nanoparticle embedded on reduced graphene oxide and polypyrrole nanotube (AuNP@rGO/PPyNT) composite through a nanosecond laser-induced heating technique. The as-prepared composite is used for individual as well as the simultaneous electrochemical determination of chemotherapy drug (furazolidone, FU) and anticancer drug (flutamide, FLT). The composite was analyzed by X-ray Diffraction, scanning electron microscopy/energy-dispersive X-ray analysis, transmission electron microscopy, Raman spectrometry, and X-ray photoelectron spectroscopy analysis, thus confirming the successful synthesis of this composite and its physical features. The modified AuNP@rGO/PPyNT electrode was examined through cyclic voltammetry and differential pulse voltammetry (DPV) methods in pH 7.0 for the determination of FU and FLT in individual, simultaneous, and mixed systems. The fabricated sensor showed wide linear responses (0.01-1080.11 μM and 0.01-1214.11 μM) of analytes, with the lower limits of detection of 2.3 and 2.45 nM and higher sensitivity of 53.75 and 50.06 μA μM^-1 cm^-2, respectively. Furthermore, the constructed sensor demonstrates higher stability, reproducibility, and repeatability, and is effectively applied for the analysis of FU and FLT content in the human serum sample analysis with satisfactory recovery.

CoFe2O4@HNTs/AuNPs Substrate for Rapid Magnetic Solid-Phase Extraction and Efficient SERS Detection of Complex Samples All-in-One

Fast and accurate practical sample detection is a great challenge in on-site detection. Herein, we developed a CoFe₂O₄@HNTs/AuNPs substrate for rapid and efficient magnetic solid-phase extraction (MSPE) surface-enhanced Raman scattering (SERS) detection of aromatic amines and nitrofuran in real samples all-in-one. Magnetic CoFe₂O₄ beads filled inside halloysite nanotubes (HNTs) can avoid aggregation of particles, endow the substrate with the rapid magnetic separation ability to simplify the pretreatment procedure, and reduce complex matrix interference. Meanwhile, outer surface AuNPs can generate electromagnetic enhancement and hot spots to amplify Raman signals of target molecules enriched/concentrated by HNTs. The CoFe₂O₄@HNTs/AuNPs substrate exhibited excellent SERS activity (high sensitivity, good reproducibility, and repeatability), pH stability (3.0-11.0), and good MSPE ability (fast magnetic enrichment/separation ability within 5 min). The CoFe₂O₄@HNTs/AuNPs MSPE SERS substrate can be applied for the determination of 4,4'-thioaniline and nitrofurantoin with a linear range of 0.054-21.7 mg/L and 0.05-1.0 mg/L, and the limits of detection were down to 0.026 mg/L and 0.014 mg/L, respectively. Furthermore, the enhancement factor (EF) of the substrate to 4,4'-thioaniline is up to 2.7 × 10⁷. Besides, the substrate can realize practical SERS determination of trace 4,4-thioaniline in cosmetics and nitrofurantoin in fish feed and aquatic samples. The recoveries were varied from 71.6% to 103.6% for 4,4-thioaniline in hair dyes and 81.9% to 116.3% for nitrofurantoin in fish feed and aquatic samples, respectively. Such a robust and efficient MSPE SERS substrate possesses great potential in rapid detection (within 15 min) for a practical sample, and it also provides a methodology for the preparation of other HNTs-based composites.

Spinel ferrite (AFe2O4)-based heterostructured designs for lithium-ion battery, environmental monitoring, and biomedical applications

The development of spinel ferrite nanomaterial (SFN)-based hybrid architectures has become more popular owing to the fascinating physicochemical properties of SFNs, such as their good electro-optical and catalytic properties, high chemothermal stability, ease of functionalization, and superparamagnetic behaviour. Furthermore, achieving the perfect combination of SFNs and different nanomaterials has promised to open up many unique synergistic effects and advantages. Inspired by the above-mentioned noteworthy properties, numerous and varied applications have been recently developed, such as energy storage in lithium-ion batteries, environmental pollutant monitoring, and, especially, biomedical applications. In this review, recent development efforts relating to SFN-based hybrid designs are described in detail and logically, classified according to 4 major hybrid structures: SFNs/carbonaceous nanomaterials; SFNs/metal–metal oxides; SFNs/MS₂; and SFNs/other materials. The underlying advantages of the additional interactions and combinations of effects, compared to the standalone components, and the potential uses have been analyzed and assessed for each hybrid structure in relation to lithium-ion battery, environmental, and biomedical applications.

We have summarized recent developments in SFN-based hybrid designs. The additional interactions, combination effects, and important changes have been analyzed and assessed for LIB, environmental monitoring, and biomedical applications.