Progress and Trends in AIE-Based Bioprobes: A Brief Overview

Development of a peptide-based AIE probe for selective detection of Cd2+ in biological systems

Cadmium ions (Cd2+) are highly toxic heavy metals that pose significant environmental and health risks, particularly due to their accumulation in living organisms. Prolonged exposure to Cd2+ can lead to severe health issues, including kidney damage, bone disorders, and increased cancer risk. Therefore, sensitive and selective detection of Cd2+ is crucial for environmental monitoring and biomedical applications. In this study, a novel "turn-on" peptide-based fluorescent probe for detecting Cd2+ was developed. The probe was constructed by conjugating a tripeptide (Glu-His-Cys) with a tetraphenylethylene (TPE) moiety using solid-phase peptide synthesis, resulting in a peptide probe with aggregation-induced emission (AIE) properties. The probe, named TPE-EHC, exhibited excellent selectivity and anti-interference capability towards Cd2+ over a range of metal ions and allowed quantitative detection of Cd2+ in the concentration range of 0-10 μM. Notably, TPE-EHC demonstrated good cell permeability and low cytotoxicity, making it suitable for fluorescence detection of Cd2+ in HeLa cells. Additionally, the probe showed potential for detecting exogenous Cd2+ in both in vitro and in vivo biological systems.

Large Stokes-Shifted Photoluminescence of Sulfur-Containing Imide Compounds and Polyimides Induced by Transient Conformational Changes upon Excitation

The optical absorption and photoluminescence (PL) properties of a series of sulfur-containing semialicyclic polyimides (S-PIs) were examined to develop thermally stable functional polymers with high glass transition temperatures, high optical transparencies, and large Stokes-shifted PL. These S-PIs were synthesized using tetracarboxylic dianhydrides, including thioether (-S-) linkages, such as 4,4-thiodiphthalic anhydride (SDPA), 4,4'-[p-phenylenebis(thio)]diphthalic anhydride (2SDEA), 4,4'-[p-thiobis(phenylene sulfanyl)] diphthalic anhydride (3SDEA), and trans-1,4-cyclohexanediamine (1,4-tDACH). In addition, the optical and PL properties of three types of imide model compounds (MCs) were investigated. All the S-PI films exhibited blue or green fluorescence (FL) under ambient conditions (in air at 295 K), weak room temperature phosphorescence (RTP) under vacuum, and bright green phosphorescence (PH) at lower temperatures (∼77 K). The intersystem crossing (ISC) rates at 77 K were significantly higher than those of the polyimides containing diphenyl-ether (-O-) linkages, primarily due to the enhancement of ISC by the heavy-atom effect of the sulfur atoms. MCs with multiple thioether (-S-) linkages exhibited a peculiar green or greenish-yellow FL with very large Stokes shifts in the CHCl3 solution. This behavior was due to the transient conformational change from the kinked structure in the ground state to a skewed structure in the excited singlet state. In addition, all the MCs dispersed in a poly(methyl methacrylate) matrix exhibited distinctive RTP owing to the restricted conformational changes in the rigid matrix. These results provide effective guidelines for designing polymers exhibiting large Stokes-shifted FL and PH at longer wavelengths in the visible region.

Review of advancement in aggregation-induced emission-based fluorescent biosensors for enzyme detection: Mechanisms and biomedical applications

BACKGROUND

Enzymes, primarily proteins produced by living organisms, exhibit high substrate selectivity and catalytic efficiency. Many are crucial for normal biological processes and are closely associated with the onset of various diseases. As such, developing methods for detecting disease-related enzymes is essential. Biosensors based on aggregation-induced emission (AIE) have gained significant attention due to their outstanding properties, including excellent photostability, high luminescence efficiency in the aggregated state, large Stokes shift, and favorable biocompatibility. This has led researchers to design a variety of fluorogens with AIE characteristics (AIEgens).

RESULTS

This review provides an overview of the luminescence mechanism behind AIE and the key properties of AIEgens. It focuses on the physiological roles of disease-related enzymes and outlines various AIE-based fluorescent biosensors developed for enzyme recognition and detection. These biosensors are categorized according to their mechanisms, including hydrolysis, electrostatic adsorption, biological redox reactions, and pH-response. Additionally, this review explores the application of enzymes in disease progression, highlighting their value in inhibitor screening, traditional Chinese medicine research, sensing, bioimaging, and disease diagnosis and therapy. It also discusses the current limitations of AIEgens and explores emerging opportunities for their application.

SIGNIFICANCE AND NOVELTY

Enzyme activity and levels are closely linked to the development of specific diseases, underscoring the importance of advancing methods for enzyme detection in disease diagnosis and treatment. This review provides valuable insights for the development of innovative AIEgens for enzyme detection, expands the options for detection mechanisms, and offers a theoretical foundation for clinical diagnostics and therapeutic applications.

Naphthalimide and Carbazole Based Mechanochromic Molecular Dyads and Triads for Selective Lysosome Imaging

In this study, we report the design and development of a stable fluorescent probe that is selectively localized in the cytosol of Hela cells. We designed two probes, 1 and 2, with D-π-A (carbazole (Cbz)-vinyl-naphthalimide (NPI)) and A-π-D-π-A (NPI-vinyl-Cbz-vinyl-NPI) architecture, respectively. Probes 1 and 2 exhibit broad photoluminescence (PL) spectra ranging from green (550 nm) to far-red (800 nm) in solutions and aggregated states. In the solid-state, the PL of these probes shows a bathochromic shift, which can be attributed to intermolecular interactions. In a water-rich medium, Probe 1, with a single NPI moiety, shows aggregation-caused quenching (ACQ) but retains a moderate quantum yield of 13.7 % (Φsoln=61.4 %). On the other hand, probe 2, with two NPI units, showed aggregation-induced enhanced emission AIEE, where the PLQY is increased nearly 4 times (Φsoln=3.5 %, Φagg=12.8 %). In-vitro cell studies revealed that these probes are non-toxic and effectively stain cells in green and red channels. Notably, Probe 1 demonstrated excellent cellular uptake and selectivity for lysosome, with a Pearson overlap coefficient of 0.91.

Biological AIE Molecules: Innovations in Synthetic Design and AI-Driven Discovery

Biological aggregation -induced emission (AIE) molecules offer significant advantages over synthetic organic fluorophores, particularly in biocompatibility, environmental sustainability, and emission properties in biological systems. Derived from biomolecules such as peptides, proteins, and nucleic acids, biological AIE molecules hold great promise for applications in biosensing, bioimaging, and target drug delivery. This review explores the design principles, mechanistic insights, and functional properties of biological AIE molecules whiles highlighting the role of artificial intelligence (AI) in accelerating their discovery and optimization. AI-driven approaches, including machine learning and computational modeling, are transforming the identification and synthesis of AIE molecules by enabling precise structural modifications and enhanced fluorescence efficiency. These advancements are paving the way for the integration of AIE molecules in next-generation smart biomedical devices, personalized medicine and sustainable technological applications. Emerging trends, including hybrid biomaterials, Ai-guided molecular engineering, and advanced imaging techniques, are expanding the scope of biological AIE molecules in healthcare and environmental monitoring. The synergy between AI and biological AIE molecules is unlocking new frontiers in biomedical technology, enabling transformative advancements in material science and healthcare applications, and shaping the future of fluorescence- based diagnostics and therapeutics.

Lateral flow analysis test strips based on aggregation-induced emission technique: Principle, design, and application

This review examines the potential of aggregation-induced luminescence (AIE) materials in lateral flow assays (LFA) to enhance the sensitivity and specificity of a range of assay applications. LFA is a straightforward and effective paper-based platform for the rapid detection of target analytes in mixtures. Its simple design, low cost, and ease of operation are among the most attractive advantages of LFA. The signal reporting label, which constitutes the core component of LFA detection, is of paramount importance for enhancing the sensitivity of the detection process. The sensitivity of traditional LFA signal labels is insufficient for the detection of biomarkers at low concentrations. To address this issue, AIE materials have been developed in recent years. These materials can significantly enhance the luminescence intensity at high concentrations or in aggregated states, exhibiting excellent photostability and a high signal-to-noise ratio. They possess the advantages of high quantum yields, good photostability, and strong fluorescence, rendering them suitable for a variety of applications, including medical diagnostics, food safety, and environmental monitoring. This review therefore provides an overview of the operational principles of AIE and LFA, details the selection of AIE materials, the design of the platform and their applications, and reviews the latest research. Notable examples include the detection of viral pathogens, bacterial and mycotoxin contamination, antibiotic residues, and pesticide residues. The integration of AIE materials in LFA technology has demonstrated the potential for rapid, accurate, and cost-effective diagnostics. However, challenges remain in large-scale synthesis and multiplexed assays. The paper concludes with a discussion of current limitations and future directions for the technology.

Dibenzofuran[a]-Fused BODIPYs: Synthesis, Photophysical Properties, and N2O2-Boron-Chelation Towards NIR Materials for Application in Organic Photodetectors

Highly annulated boron-dipyrromethenes (BODIPYs) were synthesized with the objective to develop a near-infrared (NIR)-absorbing photodetector. Post-functionalization of the dibenzoBODIPY scaffold enabled it to fuse with the dibenzofuran heterocycle at the a-bond of the pyrrole unit to give the related dyes 1 and 2, which absorb far-red light in tetrahydrofuran. Further structural modification by intramolecular B,O-chelation of 2 yielded the benzo[1,3,2]oxazaborinine-containing dye 14 having an intense absorption band with a λmax value of 812 nm (ϵ=1.3×105 M-1 cm-1), as rationalized by time dependent density functional theory (TD-DFT)/DFT calculations. Dye 14 exhibited unique emission properties, wherein irradiation at 375 nm led to a dual emission at 822 nm (Φ=5.1 %) and 470 nm (Φ=7.8 %), which could be attributed to the electronic non-adiabatic coupling due to the large energy difference between the S2 and S1 states, according to the anti-Kasha rule. Using a resistance-heating-type vacuum-deposition method, the rigid π-conjugated structure of 14 enabled its application as an NIR photodetector in a single-component device (indium tin oxide/14/Al). Current-voltage (J-V) measurements under photoirradiation at 870 nm (120 μW cm-2) produced a photocurrent of 6.05×10-7 A cm-2 at a bias potential of 0.1 V.

Aggregation-induced emission (AIE) of Au(I)-GSH complexes activated by cationic polymer for sensitive foodborne pathogens detection and inactivation

Aggregation-induced emission (AIE) is a novel signal output method but is limited in pathogen sensing. Herein, a multifunctional biosensor based on the AIE properties of Au(I)-GSH complexes as signal conversion tags was firstly constructed for rapid and sensitive total bacteria. Bacteria were captured by the boronic acid group of MNPs@Au@4-MPBA (MAu@MPBA) through recognition of peptidoglycan on their surface. Simultaneously, cationic polymer Poly (diallyldimethylammonium chloride) (PDDA) were electrostatic absorb on bacteria. After magnetic separation, the remaining PDDA induced Au(I)-GSH complexes aggregation to produce strong red fluorescence, which was linearly with the quantity of bacteria. Under optimized conditions, quantitative detection of bacteria can be achieved within 60 min, with a minimum detection concentration of 18 CFU/mL. Moreover, 90 % bacteria can be effectively inactivated while being detected. This strategy is capable of sensitively detecting and killing foodborne pathogens and can be successfully applied to food safety monitoring.

Ratiometric fluorescent probe with AIE characteristics for hypochlorite detection and biological imaging

It is very important and highly valuable to detect ClO- in samples and living cells with accuracy and speed. In this work, a novel fluorescent probe NA was prepared from 4-bromo-1,8-naphthalic anhydride by acylation reaction and Suzuki coupling reaction and used for the detection of ClO-. Thiomethyl serves as the recognition group for probe NA, while naphthalimide serves as fluorescent chromophore. The probe exhibited an extremely pronounced blue shift from yellow to blue fluorescence within 1 min after the addition of hypochlorite (ClO-). The probe demonstrates high sensitivity to ClO- with a limit of detection (LOD) of 1.22 µM. Also, probe NA demonstrates excellent selectivity and immunity to interference. Additionally, simple fluorescent test strips containing probe NA were prepared in this study, enabling rapid detection of ClO- in water samples. And NA had been effectively used to image endogenous and exogenous ClO-fluorescence in living cells. The results suggest that probe NA has significant potential for portable detection and biological applications.

A high-performance organic fluorescent probe with aggregation-induced emission properties for long-term tumor monitoring

Near-infrared organic fluorescent probes have great need in biological sciences and medicine but most of them are still largely unable to meet demand. In this work, a delicate multipurpose organic fluorescent probe (DPPM-TPA) with aggregation-induced emission performances is designed and prepared by facile method to reflect fluorescence labeling, two-photon imaging, and long-term fluorescent tracking. Specifically, DPPM-TPA NPs was constructed from 4-(diphenylamino)phenylboronic acid and DPPM-Br by classical Suzuki coupling reaction and then coated with F127. Such nanoprobe possessed high stability in diverse medium under ambient temperatures, low cytotoxicity, and brilliant fluorescence performance. More importantly, DPPM-TPA NPs showed excellent two-photon imaging and extraordinary long-term fluorescence tracing capacity to malignant tumor, and it can last up to 9 days. These results indicated that DPPM-TPA NPs is expected to serve as a fluorescent probe for photodiagnostic and providing a new idea for the development of long-term fluorescent tracker.

An Innovative Aggregation-Induced Emission-Based NIR Fluorescent Probe for Visualizing Carboxylesterases in Living Cells, Zebrafish, and Tumor-Bearing Mice

In the human body, carboxylesterases (CEs) play crucial roles in xenobiotic metabolism and lipid homeostasis. But abnormal expression of CEs is highly associated with some diseases, such as hyperlipidemia, diabetes, and liver cancer. Therefore, it is of great importance to develop an efficient tool for the accurate detection of CEs in living organisms. Herein, an innovative near-infrared (NIR) fluorescent probe, TTAP-AB, was designed for CE detection based on the aggregation-induced emission (AIE) mechanism. This probe exhibits rapid response (2 min), excellent sensitivity (limit of detection = 8.14 × 10-6 U/mL), and high selectivity to CEs. Additionally, owing to its good biocompatibility, the TTAP-AB probe enables the monitoring of dynamic changes in CE levels under drug-induced modulation in living cells and zebrafish. More importantly, the TTAP-AB probe was successfully employed to image liver tumors and assist in tumor resection through the real-time monitoring of CEs, indicating that TTAP-AB is promising to guide liver cancer surgery. Therefore, the TTAP-AB probe can not only enrich the strategies for CE detection in biological systems but also has great potential for some clinical imaging applications, including medical diagnosis, preclinical research, and imaging-guided surgery.

Aggregation-induced emission nanoparticles facilitating multicolor lateral flow immunoassay for rapid and simultaneous detection of aflatoxin B1 and zearalenone

Herein we developed a multicolor lateral flow immunoassay (LFIA) test strip for rapid and simultaneous quantitative detection of aflatoxin B1 (AFB1) and zearalenone (ZEN). Three differently colored aggregation-induced emission nanoparticles (AIENPs) were designed as LFIA signal tags, with red and green AIENPs for targeting AFB1 and ZEN at the test line, and yellow AIENPs for indicating the validity of the test strip at the control (C) line. After surface functionalization with antibodies, the developed AIENP-based multicolor LFIA allows simultaneous and accurate quantification of AFB1 and ZEN using an independent C-line assisted ratiometric signal output strategy. The detection limits of AFB1 and ZEN were 6.12 and 26 pg/mL, respectively. The potential of this method for real-world applications was well demonstrated in corn and wheat. Overall, this multicolor LFIA shows great potential for field screening of multiple mycotoxins and can be extended to rapid and simultaneous monitoring of other small molecule targets.

Recent advances in AIEgen-based chemosensors for small molecule detection, with a focus on ion sensing

Since the aggregation-based emission (AIE) phenomenon emerged in 2001, numerous chemical designs have been built around the AIE concept, displaying its utility for diverse applications, including optics, electronics, energy, and biosciences. The present review critically evaluates the broad applicability of AIEgen-based chemical models towards sensing small analytes and the structural design strategies adjusting the mode of action reported since the last decade. Various AIEgen models have been discussed, providing qualitative and quantitative estimation of cationic metal ions and anionic species, as well as biomolecular, cellular, and organelle-specific probes. A systematic overview of the reported structural design and the underlying working mode will pave the way for designing and developing the next generation of AIEgens for specific applications.

An activatable azophenyl fluorescent probe for hypoxic fluorescence imaging in living cells

Cellular hypoxia is a common pathological process in various diseases. Detecting cellular hypoxia is of great scientific significance for early diagnosis of tumors. The hypoxia fluorescence probe analysis method can efficiently and conveniently evaluate the hypoxia status in tumor cells. These probes are covalently linked by hypoxic recognition groups and organic fluorescent molecules. Currently, the fluorescent molecules used in these probes often exhibit the aggregation-caused quenching effect, which is not conducive to fluorescence imaging in water. Herein, an activatable hypoxia fluorescence probe was constructed by covalently linking aggregation-induced emission luminogens to the hypoxic recognition group azobenzene. It does not emit fluorescence in solution and in solid state under light excitation due to the presence of photosensitive azo bonds. It can be cleaved by intracellular azoreductase into fluorescent amino derivatives with aggregation-induced emission characteristic. As the concentration of oxygen in cells decreases, its fluorescence intensity increases, making it suitable for fluorescence imaging to detect hypoxic environment in live cancer cells. This work broadens the molecular design approach for activatable hypoxia fluorescent probes.

Cellular senescence imaging and senolysis monitoring in cancer therapy based on a β-galactosidase-activated aggregation-induced emission luminogen

Cellular senescence is a permanent state of cell cycle arrest characterized by increased activity of senescence associated β-galactosidase (SA-β-gal). Notably, cancer cells have been also observed to exhibit the senescence response and are being considered for sequential treatment with pro-senescence therapy followed by senolytic therapy. However, there is currently no effective agent targeting β-galactosidase (β-Gal) for imaging cellular senescence and monitoring senolysis in cancer therapy. Aggregation-induced emission luminogen (AIEgen) demonstrates strong fluorescence, good photostability, and biocompatibility, making it a potential candidate for imaging cellular senescence and monitoring senolysis in cancer therapy when endowed with β-Gal-responsive capabilities. In this study, we introduced a β-Gal-activated AIEgen named QM-β-gal for cellular senescence imaging and senolysis monitoring in cancer therapy. QM-β-gal exhibited good amphiphilic properties and formed aggregates that emitted a fluorescence signal upon β-Gal activation. It showed high specificity towards the activity of β-Gal in lysosomes and successfully visualized DOX-induced senescent cancer cells with intense fluorescence both in vitro and in vivo. Encouragingly, QM-β-gal could image senescent cancer cells in vivo for over 14 days with excellent biocompatibility. Moreover, it allowed for the monitoring of senescent cancer cell clearance during senolytic therapy with ABT263. This investigation indicated the potential of the β-Gal-activated AIEgen, QM-β-gal, as an in vivo approach for imaging cellular senescence and monitoring senolysis in cancer therapy via highly specific and long-term fluorescence imaging. STATEMENT OF SIGNIFICANCE: This work reported a β-galactosidase-activated AIEgen called QM-β-gal, which effectively imaged DOX-induced senescent cancer cells both in vitro and in vivo. QM-β-gal specifically targeted the increased expression and activity of β-galactosidase in senescent cancer cells, localized within lysosomes. It was cleared rapidly before activation but maintained stability after activation in the DOX-induced senescent tumor. The AIEgen exhibited a remarkable long-term imaging capability for senescent cancer cells, lasting over 14 days and enabled monitoring of senescent cancer cell clearance through ABT263-induced apoptosis. This approach held promise for researchers seeking to achieve prolonged imaging of senescent cells in vivo.

Recent advances in super-resolution optical imaging based on aggregation-induced emission

Super-resolution imaging has rapidly emerged as an optical microscopy technique, offering advantages of high optical resolution over the past two decades; achieving improved imaging resolution requires significant efforts in developing super-resolution imaging agents characterized by high brightness, high contrast and high sensitivity to fluorescence switching. Apart from technical requirements in optical systems and algorithms, super-resolution imaging relies on fluorescent dyes with special photophysical or photochemical properties. The concept of aggregation-induced emission (AIE) was proposed in 2001, coinciding with unprecedented advancements and innovations in super-resolution imaging technology. AIE probes offer many advantages, including high brightness in the aggregated state, low background signal, a larger Stokes shift, ultra-high photostability, and excellent biocompatibility, making them highly promising for applications in super-resolution imaging. In this review, we summarize the progress in implementation methods and provide insights into the mechanism of AIE-based super-resolution imaging, including fluorescence switching resulting from photochemically-converted aggregation-induced emission, electrostatically controlled aggregation-induced emission and specific binding-regulated aggregation-induced emission. Particularly, the aggregation-induced emission principle has been proposed to achieve spontaneous fluorescence switching, expanding the selection and application scenarios of super-resolution imaging probes. By combining the aggregation-induced emission principle and specific molecular design, we offer some comprehensive insights to facilitate the applications of AIEgens (AIE-active molecules) in super-resolution imaging.

NIR-II Protein-Escaping Dyes Enable High-Contrast and Long-Term Prognosis Evaluation of Flap Transplantation

Real-time vascular positioning, postoperative flap monitoring, and vascular reconstruction assessment are of great importance in flap transplantation. Cyanine dyes offer the advantage of high resolution in the Near-infrared-II (NIR-II) imaging window. However, the nonspecific binding of many cyanine dyes to endogenous albumin leads to high organ accumulation and skin absorption, resulting in low-quality imaging and poor reproducibility of contrast during long-term (e.g., 7 days) postoperative monitoring. Here, a novel strategy is proposed that can be widely applied to prevent protein binding for NIR-I/II Cl-containing cyanine dyes. This strategy produces protein-escaping dyes, ensuring high fluorescence enhancement in the blood with rapid clearance and no residual fluorescence, allowing for short-term repeatable injections for vascular imaging. This strategy in the perioperative monitoring of pedicle perforator flap models in mice and rats is successfully applied. Furthermore, leveraging the universality of this strategy, multiple nonoverlapping protein-escaping probes that achieve dual-excitation (808 and 1064 nm) interference-free imaging of nerve-vessel and tumor-vessel simultaneously are designed and synthesized. These protein-escaping dyes enable long-term repeatable dual-color imaging of tumor localization, resection, and tumor-vessel reconstruction at the wound site.

Mechanistic analysis of viscosity-sensitive fluorescent probes for applications in diabetes detection

Diabetes is one of the most detrimental diseases affecting the human life because it can initiate several other afflictions such as liver damage, kidney malfunctioning, and cardiac inflammation. The primary method for diabetes diagnosis involves the analysis of blood samples to quantify the level of glucose, while secondary diagnostic methods involve the qualitative analysis of obesity, fatigue, etc. However, all these symptoms start showing up only when the patient has been suffering from diabetes for a certain period of time. In order to avoid such delay in diagnosis, the development of specific fluorescent probes has attracted considerable attention. Prominent biomarkers for diabetes include abundance of certain analytes in blood serum, e.g., glucose, methylglyoxal, albumin, and reactive oxygen species; high intracellular viscosity; alteration of enzyme functionality, etc. Among these, high viscosity can greatly affect the fluorescence properties of various chromophores owing to the environment sensitivity of fluorescence spectra. In this review article, we have illustrated the application of some prominent fluorophores such as coumarin, BODIPY, xanthene, and rhodamine in the development of viscosity-dependent fluorescent probes. Detailed mechanistic aspects determining the influence of viscosity on the fluorescent properties of the probes have also been elaborated. Fluorescence mechanisms that are directly affected by the high-viscosity heterogeneous microenvironment are based on intramolecular rotations like twisted intramolecular charge transfer (TICT), aggregation-induced emission (AIE), and through-bond energy transfer (TBET). In this regard, this review article will be highly useful for researchers working in the field of diabetes treatment and fluorescent probes. It also provides a platform for the planning of futuristic clinical translation of fluorescent probes for the early-stage diagnosis and therapy of diabetes.

Aggregation-induced emission photosensitizer microneedles for enhanced melanoma photodynamic therapy

The incidence and mortality rates of skin melanoma have been increasing annually. Photodynamic therapy (PDT) enables effective destruction of tumor cells while minimizing harm to normal cells. However, traditional photosensitizers (PSs) suffer from photobleaching, photodegradation and the aggregation-caused quenching (ACQ) effect, and it is challenging for light to reach the deep layers of the skin to maximize the efficacy of PSs. Herein, we developed dissolving microneedles (MNs) loaded with PSs of TPE-EPy@CB[7] through supramolecular assembly. The PSs effectively enhanced the type-I reactive oxygen species (ROS) generation capacity, with a concentration of 2 μM possessing nearly half of the tumor cell-killing ability under 10 min white light irradiation. The MNs were successfully pierced into the targeted site for precise drug delivery. Additionally, the conical structure of the MNs, as well as the lens-like structure after dissolution, facilitated the transmission of light in the subcutaneous tissue, achieving significant inhibition of tumor growth with a tumor suppression rate of 97.8% and no systemic toxicity or side effects in melanoma mice. The results demonstrated the potent melanoma inhibition and biosafety of this treatment approach, exhibiting a new and promising strategy to conquer malignant melanoma.

Mitochondria-targeted pentacyclic triterpene NIR-AIE derivatives for enhanced chemotherapeutic and chemo-photodynamic combined therapy

Complexes formed by combining pentacyclic triterpenes (PTs) with Aggregation-Induced Emission luminogens (AIEgens), termed pentacyclic triterpene-aggregation induced emission (PT-AIEgen) complexes, merge the chemotherapeutic properties of PTs with the photocytotoxicity of AIEgens. In this study, we synthesized derivatives by connecting three types of triphenylamine (TPA) pyridinium derivatives with three common pentacyclic triterpenes. Altering the connecting group between the electron donor TPA and the electron acceptor pyridinium resulted in increased production of reactive oxygen species (ROS) by PT-AIEgens and a red-shift in their fluorescence emission spectra. Importantly, the fluorescence emission spectra of BA-3, OA-3, and UA-3 extended into the near-infrared (NIR) range, enabling NIR-AIE imaging of the sites where the derivatives aggregated. The incorporation of the pyridinium structure improved the mitochondrial targeting of PT-AIEgens, enhancing mitochondrial pathway-mediated cell apoptosis and improving the efficiency of chemotherapy (CT) and chemo-photodynamic combined therapy (CPCT) both in vivo and in vitro. Cellular fluorescence imaging demonstrated rapid cellular uptake and mitochondrial accumulation of BA-1 (-2, -3). Cell viability experiments revealed that BA-1 (-2), OA-1 (-2), and UA-1 (-2) exhibited superior CT cytotoxicity compared to their parent drugs, with BA-1 showing the most potent inhibitory effect on HeLa cells (IC50 = 1.19 μM). Furthermore, HeLa cells treated with BA-1 (1 μM), BA-2 (1.25 μM), and BA-3 (1 μM) exhibited survival rates of 2.99 % ± 0.05 % μM, 5.92 % ± 2.04 % μM, and 2.53 % ± 0.73 % μM, respectively, under white light irradiation. Mechanistic experiments revealed that derivatives induced cell apoptosis via the mitochondrial apoptosis pathway during both CT and CPCT. Remarkably, BA-1 and BA-3 in CPCT inhibited cancer cell proliferation in an in vivo melanoma mouse xenograft model. These results collectively encourage further research of PT-AIEgens as potential anticancer agents.

Research and Design of Aggregation-Regulated Thermally Activated Delayed Fluorescence Materials for Time-Resolved Two-Photon Excited Fluorescence Imaging and Biological Monitoring

Exploring the nature of aggregation-regulated thermally activated delayed fluorescence (TADF) and proposing effective design strategies for two-photon excited TADF materials for time-resolved biological imaging and monitoring are urgent and encouraging. In this work, it is found that the aggregation effect not only plays an important role in decreasing the internal conversion decay rate but also strongly influences the singlet-triplet excited-state energy difference as well as the intersystem crossing rate. It is proposed that the transformation from prompt fluorescence materials to long lifetime TADF or phosphorescence materials can be accomplished by regulating the position of substituent groups, which provides an effective method to design and develop long afterglow materials. Then, a high-performance TADF compound with a large two-photon absorption cross section in the biological window (112 GM/775 nm), high TADF efficiency (nearly 100%), and long fluorescence lifetime (50.75 μs) has been designed, which demonstrates the potential application in time-resolved two-photon excited fluorescence imaging and biological detection.

Photoactivable AIEgen-based Lipid-Droplet-Specific Drug Delivery Model for Live Cell Imaging and Two-Photon Light-Triggered Anticancer Drug Delivery

Lipid droplets (LDs) are dynamic complex organelles involved in various physiological processes, and their number and activity are linked to multiple diseases, including cancer. In this study, we have developed LD-specific near-infrared (NIR) light-responsive nano-drug delivery systems (DDSs) based on chalcone derivatives for cancer treatment. The reported nano-DDSs localized inside the cancer microenvironment of LDs, and upon exposure to light, they delivered the anticancer drug valproic acid in a spatiotemporally controlled manner. The developed systems, namely, 2'-hydroxyacetophenone-dimethylaminobenzaldehyde-valproic (HA-DAB-VPA) and 2'-hydroxyacetophenone-diphenylaminobenzaldehyde-valproic (HA-DPB-VPA) ester conjugates, required only two simple synthetic steps. Our reported DDSs exhibited interesting properties such as excited-state intramolecular proton transfer (ESIPT) and aggregation-induced emission (AIE) phenomena, which provided advantages such as AIE-initiated photorelease and ESIPT-enhanced rate of photorelease upon exposure to one- or two-photon light. Further, colocalization studies of the nano-DDSs by employing two cancerous cell lines (MCF-7 cell line and CT-26 cell line) and one normal cell line (HEK cell line) revealed LD concentration-dependent enhanced fluorescence intensity. Furthermore, systematic investigations of both the nano-DDSs in the presence and absence of oleic acid inside the cells revealed that nano-DDS HA-DPB-VPA accumulated more selectively in the LDs. This unique selectivity by the nano-DDS HA-DPB-VPA toward the LDs is due to the hydrophobic nature of the diphenylaminobenzaldehyde (mimicking the LD core), which significantly leads to the aggregation and ESIPT (at 90% volume of fw, ΦF = 20.4% and in oleic acid ΦF = 24.6%), respectively. Significantly, we used this as a light-triggered anticancer drug delivery model to take advantage of the high selectivity and accumulation of the nano-DDS HA-DPB-VPA inside the LDs. Hence, these findings give a prototype for designing drug delivery models for monitoring LD-related intracellular activities and significantly triggering the release of LD-specific drugs in the biological field.

Pyrene-Based Cationic Fluorophores with High Affinity for BF4-, PF6-, and ClO4- Anions: Detection and Removal

Anions play an indispensable role in the balance and regulation of the ecological environment and human health; however, excess anions can cause serious ecological and environment problems. Therefore, the detection and removal of excess anions in aqueous solution is not only a technological problem but also crucial for environmental protection. Herein, a set of water-soluble pyrene-based cationic fluorophores were synthesized, which exhibit high sensitivity for the detection of the anions BF4-, PF6-, and ClO4- via electrostatic interactions. Such fluorescent probes exhibit "turn-on" emission characteristics even at low concentrations of anions due to anion-π+ interactions. Moreover, these fluorescence probes act as efficient precipitating agents for the removal of the BF4-, PF6-, and ClO4- anions from an aqueous environment. This work opens up new avenues for future research on pyrene-based fluorophores as turn-on fluorescence probes for anion detection and as excellent precipitating agents in environmental settings.

Prospects of nanoparticle-based radioenhancement for radiotherapy

Radiotherapy is a key pillar of solid cancer treatment. Despite a high level of conformal dose deposition, radiotherapy is limited due to co-irradiation of organs at risk and subsequent normal tissue toxicities. Nanotechnology offers an attractive opportunity for increasing the efficacy and safety of cancer radiotherapy. Leveraging the freedom of design and the growing synthetic capabilities of the nanomaterial-community, a variety of engineered nanomaterials have been designed and investigated as radiosensitizers or radioenhancers. While research so far has been primarily focused on gold nanoparticles and other high atomic number materials to increase the absorption cross section of tumor tissue, recent studies are challenging the traditional concept of high-Z nanoparticle radioenhancers and highlight the importance of catalytic activity. This review provides a concise overview on the knowledge of nanoparticle radioenhancement mechanisms and their quantification. It critically discusses potential radioenhancer candidate materials and general design criteria for different radiation therapy modalities, and concludes with research priorities in order to advance the development of nanomaterials, to enhance the efficacy of radiotherapy and to increase at the same time the therapeutic window.

Supramolecular nanostructures of coil-rod-coil molecules containing a 9,10-distyrylanthracene group in aqueous solution and their optical properties of assemblies

A series of coil-rod-coil molecules containing a 9,10-distyrylanthracene (DSA) core was successfully synthesized. The flexible parts of these molecules are composed of different polyethylene oxide chains. These molecules with aggregation-induced luminescence properties can be assembled into micelles, spheres, and sheet-like nano-assemblies in aqueous solution and have a strong ability to form charge-transfer complexes with the electron-deficient small molecules 2,4,5,7-tetranitro-9-fluorenone and 2,4,6-trinitrophenol. Interestingly, under ultraviolet light irradiation, the DSA structure undergoes photolysis and induces the disappearance of the aggregation-induced luminescence phenomena, giving these molecules application potential as a photodegradable material. In addition, these molecules are suitable organic dyes for information encryption and anti-counterfeiting applications.

Molecular Design Strategy of Protein Isoform-Specific Fluorescent Probes by Considering Molecule in Its Entirety

Generally, different isoforms of proteins exert separate biological functions. However, due to similar structures and identical catalysis functions, distinguishing isoforms is challenging. Summarizing a molecular design strategy has great significance in developing a protein-specific fluorescent probe. Usually, recognition of a group was deemed to be the key to a protein isoform-specific response. However, some novel literature reported that fluorophore could play a vital role in the protein isoform-specific response. It means that any part of the fluorescent probe could affect the detected properties. In this work, we report the generation of the first probe to specifically recognize HexA(β-N-acetylhexosaminidase A), Hex-C4, by adjusting the length of the linker. Hex-C4 exhibits specific recognition of HexA both in vitro and in living cells. The integration of the fluorescent spectrum and the MD (molecular dynamics) results provide two factors for the molecular design of isoform-specific fluorescent probes. One is the interaction between tetraphenyl ethylene (AIE fluorogen) and amino acid residues, and the other is the interaction between amino acid residues and the binding group. In this work, a powerful tool to detect HexA in living cells is reported for the first time. Further, a workable molecular design strategy for protein isoform-specific fluorescent probes is summarized.

Aggregation-Induced Emission (AIE), Life and Health

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health.

Tetraphenylethene Derivatives Bearing Alkylammonium Substituents: Synthesis, Chemical Properties, and Application as BSA, Telomere DNA, and Hydroxyl Radical Sensors

Tetraphenylethene derivatives (TPEs) are used as luminescence probes for the detection of metal ions and biomolecules. These sensors function by monitoring the increase in the photoluminescence (PL) intensity of the TPEs resulting from aggregation-induced emission (AIE) upon interaction with the analytes. The AIE behavior of the sensors was investigated by measuring their PL. In this study, PL, PL lifetime, and confocal laser scanning microscopy measurements were carried out as part of our in-depth investigation of AIE behavior of TPEs for the detection of biomolecules and radical species. We used 1,1,2,2-tetrakis(4-((trimethylammonium)alkoxy)phenyl)tetraphenylethene tetrabromide (TPE-C(m)N+Me3Br-, m = 2, 4, and 6, where m denotes the number of methylene groups in the alkyl chain) and TPE-C(m)N+Me3TCNQ-• (TCNQ-• is the 7,7',8,8'-tetracyanoquinodimethane anion radical) as luminescent probes for the detection of bovine serum albumin (BSA), DNA, and the hydroxyl radical (•OH) generated from Fenton's reagent. The sensing performance of TPE-C(m)N+Me3Br- for BSA and DNA was found to depend on the length of the alkyl chains (m). UV-vis and PL measurements revealed that the responses of TPE-C(m)N+Me3Br- and TPE-C(4)N+TCNQ-• to Fenton's reagent depended on the solvent. The electrochemical properties of the TPE derivatives prepared in this study were additionally investigated via cyclic voltammetry.

Nobiletin with AIEE Characteristics for Targeting Mitochondria and Real-Time Dynamic Tracking in Zebrafish

Nobiletin is a natural product with multiple physiological activities and is the main ingredient of Pericarpium Citri Reticulatae. We successfully discovered that nobiletin exhibits aggregation induced emission enhancement (AIEE) properties and it has significant advantages such as a large Stokes shift, good stability and excellent biocompatibility. The increase in methoxy groups endows nobiletin a greater fat-solubility, bioavailability and transport rate than the corresponding unmethoxylated flavones. Ulteriorly, cells and zebrafish were used to explore the application of nobiletin in biological imaging. It emits fluorescence in cells and is specifically targeted at mitochondria. Moreover, it has a noteworthy affinity for the digestive system and liver of zebrafish. Due to the unique AIEE phenomenon and stable optical properties of nobiletin, it paves the way for discovering, modifying and synthesizing more molecules with AIEE characteristics. Furthermore, it has a great prospect with regard to imaging cells and cellular substructures, such as mitochondria, which play crucial roles in cell metabolism and death. Indeed, three-dimensional real-time imaging in zebrafish provides a dynamic and visual tool for studying the absorption, distribution, metabolism and excretion of drugs. In this article, more directions and inspiration can be presented for the exploration of non-invasive pharmacokinetic research and intuitive drug pathways or mechanisms.

Recent progress in the development of fluorescent probes for imaging pathological oxidative stress

Oxidative stress is closely related to the physiopathology of numerous diseases. Reactive oxygen species (ROS), reactive nitrogen species (RNS), and reactive sulfur species (RSS) are direct participants and important biomarkers of oxidative stress. A comprehensive understanding of their changes can help us evaluate disease pathogenesis and progression and facilitate early diagnosis and drug development. In recent years, fluorescent probes have been developed for real-time monitoring of ROS, RNS and RSS levels in vitro and in vivo. In this review, conventional design strategies of fluorescent probes for ROS, RNS, and RSS detection are discussed from three aspects: fluorophores, linkers, and recognition groups. We introduce representative fluorescent probes for ROS, RNS, and RSS detection in cells, physiological/pathological processes (e.g., Inflammation, Drug Induced Organ Injury and Ischemia/Reperfusion Injury etc.), and specific diseases (e.g., neurodegenerative diseases, epilepsy, depression, diabetes and cancer, etc.). We then highlight the achievements, current challenges, and prospects for fluorescent probes in the pathophysiology of oxidative stress-related diseases.

A novel red-emitting aggregation-induced emission probe for determination of β-glucosidase activity

β-Glucosidase (β-Glu) is a ubiquitous enzyme which has multiple roles in medical diagnosis, food production, agriculture, etc. Existing β-Glu assays have limitations such as complex operation, long running time, and high background noise. Here we report a red-emissive probe TBPG for measuring the activity of β-Glu. The probe was synthesized through conjugating a β-Glu targeting glucoside to an aggregation-induced emission (AIE) fluorophore. In the presence of β-Glu, TBPG was hydrolyzed and exhibited a fluorescence turn-on process. The detection conditions including time, temperature, pH value, buffer, and probe concentration were optimized systematically. Afterwards, fluorescence titration was conducted showing an excellent linearity (R² = 0.998), a wide linear dynamic range (0-5.0 U/mL), and a limit of detection as low as 0.6 U/L. The detection specificity and ion interference were evaluated by adding various biological species and ions to probe without or with β-Glu. Next, we demonstrate the applicability of probe TBPG in determining the β-Glu activity in living cells using confocal microscopy and flow cytometry. Finally, this newly established assay was applied to real soil samples. Comparable results were obtained as the commercial assay, manifesting its great potential in soil enzyme analysis.

A bioinspired silica nanocomposite for enhanced multidrug-resistant bacteria treatment and wash-free imaging

Bacterial infections have posed significant threats to public health due to the emergence of antibiotic resistance. In this work, a novel antibacterial composite nanomaterial based on spiky mesoporous silica spheres loaded with poly(ionic liquid)s and aggregation-induced emission luminogens (AIEgens) was designed for efficient multidrug-resistant (MDR) bacteria treatment and imaging. The nanocomposite exhibited excellent and long-term antibacterial activity towards both Gram-negative and Gram-positive bacteria. Meanwhile, fluorescent AIEgens facilitate real-time bacterial imaging. Our study provides a multifunctional platform and a promising alternative to antibiotics for combating pathogenic MDR bacteria.

An AIEgen-based "turn-on" probe for sensing cancer cells and tiny tumors with high furin expression

Peptide-aggregation-induced emission (AIE) luminogen (AIEgen) conjugates are widely used in the bioimaging field for their good resistance to photobleaching, red and near-infrared light emission, good biocompatibility, etc. However, their peptides are mainly negatively charged and the positively charged peptide-AIEgen conjugates are rarely used in in vivo imaging due to their high non-specific interaction with protein to cause "false-positive" results and their potential risk of triggering hemolysis. Herein, we introduce a black hole quencher 3 (BHQ3) to RVRRGFF-AIE (FA) to build a "turn-on" probe, named BHQ3-RVRRGFF-AIE (BFA). Compared with FA, BFA has advantages in the anti-interference ability for different proteins and many solution environments. But, both BFA and FA have high risks of inducing hemolysis, which restricts their further application. Through co-assembly with poly-γ-glutamic acid (γ-PGA), molecular probes BFA and FA are formed into PGA-BFA and PGA-FA nanoparticles with high biocompatibility and suppressed phototoxicity. Cell studies show that PGA-BFA can discriminate cancer cells with high furin expression from low furin-expressed cancer cells and normal cells. In vivo studies show that PGA-BFA can light up tiny tumors in the abdominal cavity with a better tumor-to-intestine ratio (3.14) than that of PGA-FA (1.47), which is helpful for the accurate excision of tiny tumors. This study will advance the development of constructing good biosafety probes with a high signal-to-noise ratio for fluorescence image-guided cancer surgery.

As Fiber Meets with AIE: Opening a Wonderland for Smart Flexible Materials

Aggregation-induced emission luminogens (AIEgens) have recently been developed at a tremendous pace in the area of organic luminescent materials by virtue of their superior properties. However, the practical applications of AIEgens still face the challenge of transforming AIEgens from molecules into materials. Till now, many AIEgens have been integrated into fiber, endowing the fiber with prominent fluorescence and/or photosensitizing capacities. AIEgens and fiber complement each other for making progress in flexible smart materials, in which the utilization of AIEgens creates new application possibilities for fiber, and the fiber provides an excellent carrier for AIEgens towards realizing the conversion from molecule to materials and an ideal platform to research the aggregate state of AIEgens in mesoscale and macroscale. This review begins with a brief summary of the recent advances related to some typical AIEgens with various functions and the technology for the fabrication of AIEgen-functionalized fiber. The most representative applications are then highlighted by focusing on energy conversion, personal protective equipment, biomedical, sensor, and fluorescence-related fields. Finally, the challenges, opportunities, and tendencies in future development are discussed in detail. This review hopes to inspire innovation in AIEgens and fiber from the view of mesoscale and macroscale.

Pyridoxal Derived AIEgen for Fluorescence Turn-off Sensing of Cu2+ and Fe2+ Ions and Fluorescence Imaging of Latent Fingerprints

Schiff base 4-((E)-((E)-(2-hydroxybenzylidene)hydrazono)methyl)-5-(hydroxymethyl)-2-methylpyridin-3-ol (HSP) was synthesized by condensing vitamin B₆ cofactor pyridoxal with salicylaldehyde hydrazone, and characterized by standard spectroscopic techniques (FT-IR, ¹H NMR, ¹³C NMR, and ESI-MS). The solution of HSP in DMSO/HEPES (10 mM, pH = 7.4) mixed solvents with varying HEPES fractions (f_w) from 0 to 95% showed aggregation-induced emission (AIE). The AIE active HSP in 95% HEPES gave intense fluorescent emission at 570 nm was employed for the detection of metal ions. The fluorescence of HSP was quenched upon adding Cu²⁺ and Fe²⁺ ions. The association constant (K_a) of the Schiff base HSP with Cu²⁺ and Fe²⁺ ions was estimated as 4.08 × 10⁵ M^-1 and 1.23 × 10⁵ M^-1, respectively by using the online analysis tool BindFit v0.5. The HSP showed the detection limit down to 1.75 µM and 1.89 µM for Cu²⁺ and Fe²⁺ ions, respectively. Further, the aggregates of HSP were applied to visualize latent fingerprints (LFPs) over a non-porous glass slide.

A Target-Triggered Emission Enhancement Strategy Based on a Y-Shaped DNA Fluorescent Nanoprobe with Aggregation-Induced Emission Characteristic for microRNA Imaging in Living Cells

DNA self-assembled fluorescent nanoprobes have been developed for bio-imaging owing to their high resistance to enzyme degradation and great cellular uptake capacity. In this work, we designed a new Y-shaped DNA fluorescent nanoprobe (YFNP) with aggregation-induced emission (AIE) characteristic for microRNA imaging in living cells. With the modification of the AIE dye, the constructed YFNP had a relatively low background fluorescence. However, the YFNP could emit a strong fluorescence due to the generation of microRNA-triggered AIE effect in the presence of target microRNA. Based on the proposed target-triggered emission enhancement strategy, microRNA-21 was detected sensitively and specifically with a detection limit of 122.8 pM. The designed YFNP showed higher bio-stability and cell uptake than the single-stranded DNA fluorescent probe, which has been successfully applied for microRNA imaging in living cells. More importantly, the microRNA-triggered dendrimer structure could be formed after the recognition of target microRNA, achieving a reliable microRNA imaging with a high spatiotemporal resolution. We expect that the proposed YFNP will become a promising candidate for bio-sensing and bio-imaging.

Novel biocompatible and sensitive visual sensor based on aggregation-induced emission for on-site detection of radioactive uranium in water and live cell imaging

In consideration of the severe hazards of radioactive uranium pollution, the rapid assessment of uranium in field and in vivo are urgently needed. In this work a novel biocompatible and sensitive visual fluorescent sensor based on aggregation-induced emission (AIE) was designed for onsite detection of UO₂²⁺ in complex environmental samples, including wastewater from Uranium Plant, river water and living cell. The AIE-active sensor (named as TPA-SP) was prepared with a "bottom-up" strategy by introducing a trianiline group (TPA) with a single-bond rotatable helix structure into the salicylaldehyde Schiff-base molecule. The photophysical properties, cytotoxicity test, recognition mechanism and the analytical performance for the detection of UO₂²⁺ in actual water samples and cell imaging were systematically investigated. TPA-SP exhibited high sensitivity and selectivity toward UO₂²⁺ as well as outstanding anti-interference ability against large equivalent of different ions in a wide effective pH range. A good linear relationship in the UO₂²⁺ concentration range of 0.05-1 μM was obtained with a low limit of detection (LOD) of 39.4 nM (9.38 ppb) for uranium detection. The prepared visual sensor showed great potential for fast risk assessment of uranium pollution in environmental systems. In addition, our results also indicated that the TPA-SP exhibited very low cytotoxicity in cells and demonstrated great potential for uranium detection in vivo.

Facile dione protection to benzo[1,2-b:6,5-b']dithiophene-4,5-dione (BDTD) in triggering ultraviolet emission - A new member of the emissive 3,3'-bridged dithiophenes

To date, 3,3'-bridged dithiophenes with bridges developed from the first period elements (either pristine or oxidised) are non emissive. Benzo[1,2-b:6,5-b']dithiophene-4,5-dione (BDTD) is a typical 3,3' fused-dithiophene with a dione bridge. It is a critical building block for semiconducting materials, and it is non emissive. We serendipitously discovered that by protecting the diketone of BDTD with ethylene glycol, two isomers (BDTD-5 and 6) were obtained and both compounds effectively emit UV light in solution. Their maximum emission (382 and 375 nm for BDTD-5 and 6, respectively) are independent of the type of solvent. Both compounds exhibited fluorescence intensity enhancement in DMF-H2O with the increase of water fraction from 0-90%. BDTD-6 can also effectively emit in its crystalline state with a quantum yield (QY) of 14% and an average fluorescence lifetime of 1.6 ns. X-ray crystallographic analysis indicates that BDTD-6 possesses a 3D C-H…O interaction structure which produced its effective emission in the crystalline state. These two isomers not only have enlarged the emissive members of the 3,3'-fused dithiophene family, but also expand the emission boundary of emitters in this category to the UV area.

Supramolecular self-assembled AIE molecules are used in the search for target proteins in norcantharidin

Norcantharidin (NCTD), a demethylated derivative of cantharidin, is an anticancer active component in traditional Chinese medicine. At present, the main methods for finding its target proteins are pharmacological methods and biophysical screening, which cannot achieve the purpose of efficient and accurate screening. Here we established a new analytical method for specific fishing and assisted imaging for norcantharidin target proteins. For the AIE supramolecule probe, the benzophenone azide (BPA) fluorescent nanoparticles with strong AIE properties were encapsulated in biocompatible DSPE-PEG that covalently coupled with NCTD (named BPA@NCTD NPs). The target proteins of NCTD can be captured by BPA@NCTD NPs, and then be detected to investigate the potential signaling pathways. The screened differential proteins were analysed through the protein and signaling pathway database, and multiple signaling pathways were obtained and verified. The mechanism of norcantharidin in inhibiting the migration and invasion of A549 cells through the P53 signaling pathway was confirmed by Western blot experiments. Our research showed that AIE supramolecule probe BPA@NCTD NPs has the dual functions of specific screening of A549 cells target proteins and biological imaging, which not only offers a good anti-fluorescence quenching ability for the dynamic imaging process of NCTD, but also provides a novel and efficient specific method for efficient analysis of target proteins and signal pathways.

High-performance green-emitting AIE nanoparticles for lateral flow immunoassay applications

Ultrabright green-emissive AIE nanoparticles (AIENPs) were used as signal-amplification probes to enhance the detectability of lateral flow immunoassay (LFIA). The detection performances of the green-emissive AIENP probes in both sandwich and competitive LFIA formats were systematically evaluated. Benefiting from its remarkable fluorescent brightness, the developed AIENP-LFIA showed versatile applicability for the detection of small molecules and macromolecules by using ochratoxin A (OTA) and procalcitonin (PCT) as model analytes, respectively. Under the optimum conditions, the detection limits (LODs) of the fabricated AIENP-LFIA for OTA and PCT were 0.043 ng mL^-1 and 0.019 ng mL^-1, respectively. These LOD values are significantly lower than those of conventional LFIA methods using gold nanoparticles as signal reporters. In addition, we demonstrated the practical application potential of AIENP-LFIA for the detection of OTA in real maize samples and PCT in real serum samples. These results indicated that the ultrabright green-emissive AIENPs were promising as signal output materials for building high-performance LFIA platform and broadening the application scenarios of LFIA.

'AIE + ESIPT' Active 2-hydroxy-naphthalene Hydrazone for the Fluorescence Turn-on Sensing of Al3

The aggregation-induced emission (AIE) behaviour of an easy-to-prepare Schiff base 2-hydroxy-naphthalene hydrazone (L) was explored in mixed DMSO/HEPES medium by selecting DMSO as a good solvent, whereas HEPES buffer (H₂O, 10 mM, pH 7.4) as a poor solvent. The weakly fluorescent L in pure DMSO showed a fluorescence enhancement at 532 nm upon increasing the fraction of HEPES above 70% because of the self-aggregation of L and excited state intramolecular proton transfer (ESIPT) process. The AIE luminogen (AIEgen) L was applied for the sensing of metal ions in HEPES buffer (5% DMSO, 10 mM, pH 7.4). Among the fourteen different metal ions (Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Mg²⁺, Fe³⁺, Fe²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Al³⁺, Cr³⁺), AIEgen L showed a selective fluorescence enhancement at 435 nm in the presence of Al³⁺ without disturbing the fluorescence intensity at 532 nm due to the chelation-enhanced fluorescence effect (CHEF). The detection limit of 20 nM was estimated by performing the fluorescence titration of AIEgen L with Al³⁺. The reversibility of the Al³⁺ selective AIEgen L was demonstrated by adding a strong chelating agent EDTA. Finally, the practical utility of AIEgen L was validated by quantifying Al³⁺ in river and tap water samples.

Luminescent fac-[ReX(CO)3(phenyl-pyta)] (X = Cl, Br, I) complexes: influence of the halide ligand on the electronic properties in solution and in the solid state

Tricarbonylrhenium(I) complexes that incorporate a chloride ligand are promising photoluminescent materials, but those incorporating a bromide or iodide ligand have received very little attention regarding their solid-state properties. In this work, three rhenium(I) complexes differing only by the nature of their halide ligand (X = Cl, Br, and I) were compared. They are based on a fac-[ReX(CO)₃(N^N)] framework where the N^N bidentate ligand is a 3-(2-pyridyl)-1,2,4-triazole unit functionalized by an appended phenyl group. DFT calculations showed that the character of the lowest energy transitions progressively changes from Re → N^N ligand (MLCT) to X → N^N ligand (XLCT) when increasing the size of the halogen atom. Regarding the electrochemical behavior, the chloride and bromide complexes 1-Cl and 1-Br were similar, while the iodide complex 1-I exhibited a strikingly different electrochemical signature in oxidation. From a spectroscopic viewpoint, all three complexes emitted weak red-orange phosphorescence in dichloromethane solution. However, in the solid state, marked differences appeared. Not only was 1-Cl a good emitter of yellow light, but it had strong solid-state luminescence enhancement (SLE) properties. In comparison, 1-Br and 1-I were less emissive and they showed better mechanoresponsive luminescence (MRL) properties, probably related to a loose molecular arrangement in the crystal packing and to the opening of vibrational non-radiative deactivation pathways. This study highlights for the first time how the nature of the halide ligand in this type of complex allows fine tuning of the solid-state optical properties, for potential applications either in bio-imaging or in the field of MRL-active materials.

Research and Design of Aggregation-Induced Phosphorescent Materials for Time-Resolved Two-Photon Excited Luminescence Imaging

Pure organic two-photon excited room temperature phosphorescent (RTP) materials have attracted great attention for time-resolved imaging due to their long emission lifetime and high resolution. The materials with an aromatic carbonyl group exhibit aggregation-induced emission (AIE) and RTP characteristics simultaneously. Here, we deeply explored the nature of aggregation-induced phosphorescence (AIP), especially the relationship between molecular configuration and optical properties. It was found that aggregation effect can suppress geometrical vibrations and regulate energy difference between S₁ and T₁. The aromatic carbonyl group plays significant roles in changing electronic configuration, resulting in large Stokes shift and spin-orbit coupling. It also leads to small transition dipole moment, decreasing two-photon absorption cross section and radiative decay rate. To improve two-photon absorption properties, we further designed a π-conjugated compound with large two-photon absorption cross section in the biological window (36.40 GM/656 nm) and AIP characteristics, which is a potential material in the application of time-resolved two-photon excited imaging.

Polymerization-Enhanced Photophysical Performances of AIEgens for Chemo/Bio-Sensing and Therapy

AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.

AIEgens: Next Generation Signaling Source for Immunoassays?

Luminogens with aggregation-induced emission (AIEgens) properties have numerous broad applications in fields of chemical and biological analyses due to their exceptional photostability, excellent signal reliability, high quantum yield, and large Stokes' shift. In particular, AIEgens also bring new blood for immunoassay. Since publication of the first 2004 paper, AIEgens-based immunoassays have received significant attention because of their high sensitivity, specificity, accuracy, and reliability. However, until now, there have been no comprehensive literature reviews focused on the evolving field of AIEgens-based immunoassays. Thus, we have extensively reviewed AIEgens-based immunoassays from their basic working principles to specific applications. We focus on several fundamental elements of AIEgens-based immunoassays, including the typical structures of AIEgens, emission mechanism of AIEgens probes, function of AIEgens in immunoassays, and platform of AIEgens-based immunoassays. Then, the representative applications of AIEgens-based immunoassays in food safety, medical diagnostics, and environmental monitoring are explored. Thus, proposals on how to further improve the AIEgens-based immunoassay performance are also discussed, as well as future challenges and perspectives, aiming to provide brief and valid guidelines for choosing suitable AIEgens-based immunoassays according to specific application requirements.