Fibrous Topography-Potentiated Canonical Wnt Signaling Directs the Odontoblastic Differentiation of Dental Pulp-Derived Stem Cells

TPG-functionalized PLGA/PCL nanofiber membrane facilitates periodontal tissue regeneration by modulating macrophages polarization via suppressing PI3K/AKT and NF-κB signaling pathways

Traditional fibrous membranes employed in guided tissue regeneration (GTR) in the treatment of periodontitis have limitations of bioactive and immunomodulatory properties. We fabricated a novel nTPG/PLGA/PCL fibrous membrane by electrospinning which exhibit excellent hydrophilicity, mechanical properties and biocompatibility. In addition, we investigated its regulatory effect on polarization of macrophages and facilitating the regeneration of periodontal tissue both in vivo and in vitro. These findings showed the 0.5%TPG/PLGA/PCL may inhibit the polarization of RAW 264.7 into M1 phenotype by suppressing the PI3K/AKT and NF-κB signaling pathways. Furthermore, it directly up-regulated the expression of cementoblastic differentiation markers (CEMP-1 and CAP) in periodontal ligament stem cells (hPDLSCs), and indirectly up-regulated the expression of cementoblastic (CEMP-1 and CAP) and osteoblastic (ALP, RUNX2, COL-1, and OCN) differentiation markers by inhibiting the polarization of M1 macrophage. Upon implantation into a periodontal bone defect rats model, histological assessment revealed that the 0.5%TPG/PLGA/PCL membrane could regenerate oriented collagen fibers and structurally intact epithelium. Micro-CT (BV/TV) and the expression of immunohistochemical markers (OCN, RUNX-2, COL-1, and BMP-2) ultimately exhibited satisfactory regeneration of alveolar bone, periodontal ligament. Overall, 0.5%TPG/PLGA/PCL did not only directly promote osteogenic effects on hPDLSCs, but also indirectly facilitated cementoblastic and osteogenic differentiation through its immunomodulatory effects on macrophages. These findings provide a novel perspective for the development of materials for periodontal tissue regeneration.

Electrospun nanofibers applications in caries lesions: prevention, treatment and regeneration

Dental caries is a multifactorial disease primarily mediated by biofilm formation, resulting in a net loss of mineral content and degradation of organic matrix in dental hard tissues. Caries lesions of varying depths can result in demineralization of the superficial enamel, the formation of deep cavities extending into the dentin, and even pulp infection. Electrospun nanofibers (ESNs) exhibit an expansive specific surface area and a porous structure, closely mimicking the unique architecture of the natural extracellular matrix (ECM). This unique topography caters to the transport of small molecules and facilitates localized therapeutic drug delivery, offering great potential in regulating cell behavior, and thereby attracting interest in ESNs' applications in the treatment of caries lesions and the reconditioning of the affected dental tissues. Thus, this review aims to consolidate the recent developments in ESNs' applications for caries lesions. This review begins with an introduction to the electrospinning technique and provides a comprehensive overview of the biological properties and modification methods of ESNs, followed by an introduction outlining the basic pathological processes, classification and treatment requirements of caries lesions. Finally, the review offers a detailed examination of the research progress on the ESNs' application in caries lesions and concludes by addressing the limitations.

Effects of different signaling pathways on odontogenic differentiation of dental pulp stem cells: a review

Dental pulp stem cells (DPSCs) are a type of mesenchymal stem cells that can differentiate into odontoblast-like cells and protect the pulp. The differentiation of DPSCs can be influenced by biomaterials or growth factors that activate different signaling pathways in vitro or in vivo. In this review, we summarized six major pathways involved in the odontogenic differentiation of DPSCs, Wnt signaling pathways, Smad signaling pathways, MAPK signaling pathways, NF-kB signaling pathways, PI3K/AKT/mTOR signaling pathways, and Notch signaling pathways. Various factors can influence the odontogenic differentiation of DPSCs through one or more signaling pathways. By understanding the interactions between these signaling pathways, we can expand our knowledge of the mechanisms underlying the regeneration of the pulp-dentin complex.

Replication of natural surface topographies to generate advanced cell culture substrates

Surface topographies of cell culture substrates can be used to generate in vitro cell culture environments similar to the in vivo cell niches. In vivo, the physical properties of the extracellular matrix (ECM), such as its topography, provide physical cues that play an important role in modulating cell function. Mimicking these properties remains a challenge to provide in vitro realistic environments for cells. Artificially generated substrates' topographies were used extensively to explore this important surface cue. More recently, the replication of natural surface topographies has been enabling to exploration of characteristics such as hierarchy and size scales relevant for cells as advanced biomimetic substrates. These substrates offer more realistic and mimetic environments regarding the topographies found in vivo. This review will highlight the use of natural surface topographies as a template to generate substrates for in-vitro cell culture. This review starts with an analysis of the main cell functions that can be regulated by the substrate's surface topography through cell-substrate interactions. Then, we will discuss research works wherein substrates for cell biology decorated with natural surface topographies were used and investigated regarding their influence on cellular performance. At the end of this review, we will highlight the advantages and challenges of the use of natural surface topographies as a template for the generation of advanced substrates for cell culture.

Tideglusib-incorporated nanofibrous scaffolds potently induce odontogenic differentiation

Pulp-Dentin regeneration is a key aspect of maintain tooth vitality and enabling good oral-systemic health. This study aimed to investigate a nanofibrous scaffold loaded with a small molecule i.e. Tideglusib to promote odontogenic differentiation. Tideglusib (GSK-3β inhibitor) interaction with GSK-3β was determined using molecular docking and stabilization of β-catenin was examined by confocal microscopy. 3D nanofibrous scaffolds were fabricated through electrospinning and their physicochemical characterizations were performed. Scaffolds were seeded with mesenchymal stem cells or pre-odontoblast cells to determine the cells proliferation and odontogenic differentiation. Our results showed that Tideglusib (TG) binds with GSK-3β at Cys199 residue. Stabilization and nuclear translocation of β-catenin was increased in the odontoblast cells treated with TG. SEM analysis revealed that nanofibers exhibited controlled architectural features that effectively mimicked the natural ECM. UV-Vis spectroscopy demonstrated that TG was incorporated successfully and released in a controlled manner. Both kinds of biomimetic nanofibrous matrices (PCLF-TG100, PCLF-TG1000) significantly stimulated cells proliferation. Furthermore, these scaffolds significantly induced dentinogenic markers (ALP, and DSPP) expression and biomineralization. In contrast to current pulp capping material driving dentin repair, the sophisticated, polymeric scaffold systems with soluble and insoluble spatiotemporal cues described here can direct stem cell differentiation and dentin regeneration. Hence, bioactive small molecule-incorporated nanofibrous scaffold suggests an innovative clinical tool for dentin tissue engineering.

Topographic Cues of a PLGA Scaffold Promote Odontogenic Differentiation of Dental Pulp Stem Cells through the YAP/β-Catenin Signaling Axis

PURPOSE

The underlying mechanism of how topographic cues of artificial scaffolds regulate cell function remains poorly understood. Yes-associated protein (YAP) and β-catenin signaling have both been reported to play important roles in mechano-transduction and dental pulp stem cells (DPSCs) differentiation. We investigated the effects of YAP and β-catenin in spontaneous odontogenic differentiation of DPSCs induced by topographic cues of a poly(lactic-co-glycolic acid) (PLGA) membrane.

METHODS

The topographic cues and function of a fabricated PLGA scaffold were explored via scanning electron microscopy (SEM), alizarin red staining (ARS), reverse transcription-polymerase chain reaction (RT-PCR), and pulp capping. Immunohistochemistry (IF), RT-PCR, and western blotting (WB) were used to observe the activation of YAP and β-catenin when DPSCs were cultured on the scaffolds. Further, YAP was inhibited or overexpressed on either side of the PLGA membrane, and YAP, β-catenin, and odontogenic marker expression were analyzed using IF, ARS, and WB.

RESULTS

The closed side of the PLGA scaffold promoted spontaneous odontogenic differentiation and nuclear translocation of YAP and β-catenin in vitro and in vivo compared to the open side. The YAP antagonist verteporfin inhibited β-catenin expression, nuclear translocation, and odontogenic differentiation on the closed side, but the effects were rescued by LiCl. YAP overexpressing DPSCs on the open side activated β-catenin signaling and promoted odontogenic differentiation.

CONCLUSION

The topographic cue of our PLGA scaffold promotes odontogenic differentiation of DPSCs and pulp tissue through the YAP/β-catenin signaling axis.

Modulators of Wnt Signaling Pathway Implied in Dentin Pulp Complex Engineering: A Literature Review

The main goal of vital pulp therapy (VPT) is to preserve the vitality of the pulp tissue, even when it is exposed due to bacterial invasion, iatrogenic mechanical preparation, or trauma. The type of new dentin formed as a result of VPT can differ in its cellular origin, its microstructure, and its barrier function. It is generally agreed that the new dentin produced by odontoblasts (reactionary dentin) has a tubular structure, while the dentin produced by pulp cells (reparative dentin) does not or has less. Thus, even VPT aims to maintain the vitality of the pulp. It does not regenerate the dentin pulp complex integrity. Therefore, many studies have sought to identify new therapeutic strategies to successfully regenerate the dentin pulp complex. Among them is a Wnt protein-based strategy based on the fact that Wnt proteins seem to be powerful stem cell factors that allow control of the self-renewal and proliferation of multiple adult stem cell populations, suitable for homeostasis maintenance, tissue healing, and regeneration promotion. Thus, this review outlines the different agents targeting the Wnt signaling that could be applied in a tooth environment, and could be a potential therapy for dentin pulp complex and bone regeneration.

Nanomaterials in Scaffolds for Periodontal Tissue Engineering: Frontiers and Prospects

The regeneration of periodontium represents important challenges to controlling infection and achieving functional regeneration. It has been recognized that tissue engineering plays a vital role in the treatment of periodontal defects, profiting from scaffolds that create the right microenvironment and deliver signaling molecules. Attributable to the excellent physicochemical and antibacterial properties, nanomaterials show great potential in stimulating tissue regeneration in tissue engineering. This article reviewed the up-to-date development of nanomaterials in scaffolds for periodontal tissue engineering. The paper also represented the merits and defects of different materials, among which the biocompatibility, antibacterial properties, and regeneration ability were discussed in detail. To optimize the project of choosing materials and furthermore lay the foundation for constructing a series of periodontal tissue engineering scaffolds, various nanomaterials and their applications in periodontal regeneration were introduced.

Influencing factors of pulp-dentin complex regeneration and related biological strategies

Regenerative endodontic therapy (RET) utilizing tissue engineering approach can promote the regeneration of pulp-dentin complex to restore pulp vascularization, neuralization, immune function and tubular dentin, therefore the regenerated pulp-dentin complex will have normal function. Multiple factors may significantly affect the efficacy of RET, including stem cells, biosignaling molecules and biomaterial scaffolds. Stem cells derived from dental tissues (such as dental pulp stem cells) exhibit certain advantages in RET. Combined application of multiple signaling molecules and activation of signal transduction pathways such as Wnt/β-catenin and BMP/Smad play pivotal roles in enhancing the potential of stem cell migration, proliferation, odontoblastic differentiation, and nerve and blood vessel regeneration. Biomaterials suitable for RET include naturally-derived materials and artificially synthetic materials. Artificially synthetic materials should imitate natural tissues for biomimetic modification in order to realize the temporal and spatial regulation of pulp-dentin complex regeneration. The realization of pulp-dentin complex regeneration depends on two strategies: stem cell transplantation and stem cell homing. Stem cell homing strategy does not require the isolation and culture of stem cells in vitro, so is better for clinical application. However, in order to achieve the true regeneration of pulp-dentin complex, problems related to improving the success rate of stem cell homing and promoting their proliferation and differentiation need to be solved. This article reviews the influencing factors of pulp-dentin complex regeneration and related biological strategies, and discusses the future research direction of RET, to provide reference for clinical translation and application of RET.

The effect of BMP4, FGF8 and WNT3a on mouse iPS cells differentiating to odontoblast-like cells

We investigated whether BMP4, FGF8, and/or WNT3a on neural crest-like cells (NCLC) derived from mouse induced pluripotent stem (miPS) cells will promote differentiation of odontoblasts-like cells. After the miPS cells matured into embryonic body (EB) cells, they were cultured in a neural induction medium to produce NCLC. As the differentiation of NCLC were confirmed by RT-qPCR, they were then disassociated and cultured with a medium containing, BMP4, FGF8, and/or WNT3a for 7 and 14 days. The effect of these stimuli on NCLC were assessed by RT-qPCR, ALP staining, and immunocytochemistry. The cultured EB cells presented a significant increase of Snai1, Slug, and Sox 10 substantiating the differentiation of NCLC. NCLC stimulated with more than two stimuli significantly increased the odontoblast markers Dmp-1, Dspp, Nestin, Alp, and Runx2 expression compared to control with no stimulus. The expression of Dmp-1 and Dspp upregulated more when FGF8 was combined with WNT3a. ALP staining was positive in groups containing BMP4 and fluorescence was observed in immunocytochemistry of the common significant groups between Dmp-1 and Dspp. After stimulation, the cell morphology demonstrated a spindle-shaped cells with long projections resembling odontoblasts. Simultaneous BMP4, FGF8, and WNT3a stimuli significantly differentiated NCLC into odontoblast-like cells.

Precision-engineered niche for directed differentiation of MSCs to lineage-restricted mineralized tissues

The major difference between tissue healing and regeneration is the extent of instructional cues available to precisely direct the biological response. A classic example is reparative or osteodentin that is seen in response to physicochemical injury to the pulp-dentin complex. Dentin regeneration can direct the differentiation of dental stem cells using concerted actions of both soluble (biomolecules, agonists, and antagonists) and insoluble (matrix topology) cues. The major purpose of this study was to examine the synergistic combination of two discrete biomaterial approaches by utilizing nanofiber scaffolds in discrete configurations (aligned or random) with incorporated polymeric microspheres capable of controlled release of growth factors. Further, to ensure appropriate disinfection for clinical use, Radio-Frequency Glow Discharge (RFGD) treatments were utilized, followed by seeding with a mesenchymal stem cell (MSC) line. SEM analysis revealed electrospinning generated controlled architectural features that significantly improved MSC adhesion and proliferation on the aligned nanofiber scaffolds compared to randomly oriented scaffolds. These responses were further enhanced by RFGD pre-treatments. These enhanced cell adhesion and proliferative responses could be attributed to matrix-induced Wnt signaling that was abrogated by pre-treatments with anti-Wnt3a neutralizing antibodies. Next, we incorporated controlled-release microspheres within these electrospun scaffolds with either TGF-β1 or BMP4. We observed that these scaffolds could selectively induce dentinogenic or osteogenic markers (DSPP, Runx2, and BSP) and mineralization. This work demonstrates the utility of a novel, modular combinatorial scaffold system capable of lineage-restricted differentiation into bone or dentin. Future validation of this scaffold system in vivo as a pulp capping agent represents an innovative dentin regenerative approach capable of preserving tooth pulp vitality.

Advances in Modification Methods Based on Biodegradable Membranes in Guided Bone/Tissue Regeneration: A Review

Guided tissue/bone regeneration (GTR/GBR) is commonly applied in dentistry to aid in the regeneration of bone/tissue at a defective location, where the assistive material eventually degrades to be substituted with newly produced tissue. Membranes separate the rapidly propagating soft tissue from the slow-growing bone tissue for optimal tissue regeneration results. A broad membrane exposure area, biocompatibility, hardness, ductility, cell occlusion, membrane void ratio, tissue integration, and clinical manageability are essential functional properties of a GTR/GBR membrane, although no single modern membrane conforms to all of the necessary characteristics. This review considers ongoing bone/tissue regeneration engineering research and the GTR/GBR materials described in this review fulfill all of the basic ISO requirements for human use, as determined through risk analysis and rigorous testing. Novel modified materials are in the early stages of development and could be classified as synthetic polymer membranes, biological extraction synthetic polymer membranes, or metal membranes. Cell attachment, proliferation, and subsequent tissue development are influenced by the physical features of GTR/GBR membrane materials, including pore size, porosity, and mechanical strength. According to the latest advances, key attributes of nanofillers introduced into a polymer matrix include suitable surface area, better mechanical capacity, and stability, which enhances cell adhesion, proliferation, and differentiation. Therefore, it is essential to construct a bionic membrane that satisfies the requirements for the mechanical barrier, the degradation rate, osteogenesis, and clinical operability.

Enhancing osteoblast differentiation through small molecule-incorporated engineered nanofibrous scaffold

OBJECTIVE

This study aimed to investigate the effect of small molecules incorporated into the engineered nanofibrous scaffold to enhance the osteoblast differentiation MATERIALS AND METHODS: Poly-ε-caprolactone (PCL) nanofiber matrices with lithium chloride (LiCl) were fabricated using the electrospinning technique. Scaffolds were characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). Scaffolds were seeded with MC3T3-E1 cells and assessed using Western blots (β-catenin), alamarBlue assay (proliferation), qPCR (osteoblast differentiation), and mineralization (Alizarin Red staining).

RESULTS

We observed LiCl nanofiber scaffolds induced concentration-dependent cell proliferation that correlated with an increased β-catenin expression indicating sustained Wnt signaling. Next, we examined osteoblast differentiation markers such as osteocalcin (OCN) and Runt-related transcription factor 2 (Runx2) and noted increased expression in LiCl nanofiber scaffolds. We also noted increased bone morphogenetic protein (BMP-2, 4, and 7) expressions suggesting activated Wnt can promote cures to further osteogenic differentiation. Finally, Alizarin Red staining demonstrated increased mineral deposition in LiCl-incorporated nanofiber scaffolds.

CONCLUSIONS

Together, these results indicated that LiCl-incorporated nanofiber scaffolds enhance osteoblast differentiation.

CLINICAL RELEVANCE

Small molecule-incorporated nanofibrous scaffolds are an innovative clinical tool for bone tissue engineering.

Microenvironment Influences Odontogenic Mesenchymal Stem Cells Mediated Dental Pulp Regeneration

Dental pulp as a source of nutrition for the whole tooth is vulnerable to trauma and bacterial invasion, which causes irreversible pulpitis and pulp necrosis. Dental pulp regeneration is a valuable method of restoring the viability of the dental pulp and even the whole tooth. Odontogenic mesenchymal stem cells (MSCs) residing in the dental pulp environment have been widely used in dental pulp regeneration because of their immense potential to regenerate pulp-like tissue. Furthermore, the regenerative abilities of odontogenic MSCs are easily affected by the microenvironment in which they reside. The natural environment of the dental pulp has been proven to be capable of regulating odontogenic MSC homeostasis, proliferation, and differentiation. Therefore, various approaches have been applied to mimic the natural dental pulp environment to optimize the efficacy of pulp regeneration. In addition, odontogenic MSC aggregates/spheroids similar to the natural dental pulp environment have been shown to regenerate well-organized dental pulp both in preclinical and clinical trials. In this review, we summarize recent progress in odontogenic MSC-mediated pulp regeneration and focus on the effect of the microenvironment surrounding odontogenic MSCs in the achievement of dental pulp regeneration.

Applications of nanotechnology in 3D printed tissue engineering scaffolds

Tissue engineering is an interdisciplinary field that aims to combine life sciences and engineering to create therapies that regenerate functional tissue. Early work in tissue engineering mostly used materials as inert scaffolding structures, but research has shown that constructing scaffolds from biologically active materials can help with regeneration by enabling cell-scaffold interactions or release of factors that aid in regeneration. Three-dimensional (3D) printing is a promising technique for the fabrication of structurally intricate and compositionally complex tissue engineering scaffolds. Such scaffolds can be functionalized with techniques developed by nanotechnology research to further enhance their ability to stimulate regeneration and interact with cells. Nanotechnological components, nanoscale textures, and microscale/nanoscale printing can all be incorporated into the manufacture of 3D printed scaffolds. This review discusses recent advancements in the merging of nanotechnology with 3D printed tissue engineering scaffolds, with a focus on applications of nanoscale components, nanoscale texture, and innovative printing techniques and the effects observed in vitro and in vivo.

The Effect of Physical Cues of Biomaterial Scaffolds on Stem Cell Behavior

Stem cells have been sought as a promising cell source in the tissue engineering field due to their proliferative capacity as well as differentiation potential. Biomaterials have been utilized to facilitate the delivery of stem cells in order to improve their engraftment and long-term viability upon implantation. Biomaterials also have been developed as scaffolds to promote stem cell induced tissue regeneration. This review focuses on the latter where the biomaterial scaffold is designed to provide physical cues to stem cells in order to promote their behavior for tissue formation. Recent work that explores the effect of scaffold physical properties, topography, mechanical properties and electrical properties, is discussed. Although still being elucidated, the biological mechanisms, including cell shape, focal adhesion distribution, and nuclear shape, are presented. This review also discusses emerging areas and challenges in clinical translation.

Stem Cell-based Dental Pulp Regeneration: Insights From Signaling Pathways

Deep caries, trauma, and severe periodontitis result in pulpitis, pulp necrosis, and eventually pulp loss. However, no clinical therapy can regenerate lost pulp. A novel pulp regeneration strategy for clinical application is urgently needed. Signaling transduction plays an essential role in regulating the regenerative potentials of dental stem cells. Cytokines or growth factors, such as stromal cell-derived factor (SDF), fibroblast growth factor (FGF), bone morphogenetic protein (BMP), vascular endothelial growth factor (VEGF), WNT, can promote the migration, proliferation, odontogenic differentiation, pro-angiogenesis, and pro-neurogenesis potentials of dental stem cells respectively. Using the methods of signaling modulation including growth factors delivery, genetic modification, and physical stimulation has been applied in multiple preclinical studies of pulp regeneration based on cell transplantation or cell homing. Transplanting dental stem cells and growth factors encapsulated into scaffold regenerated vascularized pulp-like tissue in the root canal. Also, injecting a flowable scaffold only with chemokines recruited endogenous stem/progenitor cells for pulp regeneration. Notably, dental pulp regeneration has gradually developed into the clinical phase. These findings enlightened us on a novel strategy for structural and functional pulp regeneration through elaborate modulation of signaling transduction spatially and temporally via clinically applicable growth factors delivery. But challenges, such as the adverse effects of unphysiological signaling activation, the controlled drug release system, and the safety of gene modulation, are necessary to be tested in future works for promoting the clinical translation of pulp regeneration.

M-keratin nano-materials create a mineralized micro-circumstance to promote proliferation and differentiation of DPSCs

As traditional root canal obturation leads to the loss of the biological activity of the tooth, it is necessary to develop a material that promotes the regeneration of dental tissue. However, this remains a challenging task. Our study aims to construct a mineralized material to support the proliferation and differentiation of dental pulp stem cells (DPSCs), and to explore a new strategy for the treatment of pulp tissue necrosis. Mineralized keratin (M-keratin), defined as keratin that has been mineralized in simulated body fluid, was first harvested to construct the root canal filling material. Characterizations indicated that new substances or components were formed on the surface of keratin particles after mineralization, and the morphology of the keratin was changed. M-keratin promoted the growth, proliferation, and differentiation of DPSCs. After cultivation with M-keratin, DPSCs exhibited more extracellular matrix proteins interacting with the culture interface, the number of these cells increased significantly, and the 3-[4,5-dimethylthiazol-2-yl-]-2,5-diphenyltetrazolium bromide values of cells in the experimental group also increased. Meanwhile, signs that the DPSCs began to differentiate into odontoblasts were observed or detected by alizarin red S staining, ELISA, RNA-Seq, and western blot. We hope that this study will contribute to the development of a new material that promotes the regeneration of dental tissue as well as providing new ideas and strategies for the treatment of dental pulp disease.

Wnt/β-Catenin Signaling Promotes the Formation of Preodontoblasts In Vitro

Odontoblast differentiation is a complex and multistep process regulated by signaling pathways, including the Wnt/β-catenin signaling pathway. Both positive and negative effects of Wnt/β-catenin signaling on dentinogenesis have been reported, but the underlying mechanisms of these conflicting results are still unclear. To gain a better insight into the role of Wnt/β-catenin in dentinogenesis, we used dental pulp cells from a panel of transgenic mice, in which fluorescent protein expression identifies cells at different stages of odontoblast and osteoblast differentiation. Our results showed that exposure of pulp cells to WNT3a at various times and durations did not induce premature differentiation of odontoblasts. These treatments supported the survival of undifferentiated cells in dental pulp and promoted the formation of 2.3GFP⁺ preodontoblasts and their rapid transition into differentiated odontoblasts expressing DMP1-Cherry and DSPP-Cerulean transgenes. WNT3a also promoted osteogenesis in dental pulp cultures. These findings provide critical information for the development of improved treatments for vital pulp therapy and dentin regeneration.

R-Spondin 2 Induces Odontogenic Differentiation of Dental Pulp Stem/Progenitor Cells via Regulation of Wnt/β-Catenin Signaling

Odontoblast cells generated from human dental pulp stem/progenitor cells (hDPSCs) secrete reparative dentin in responds to an injury. Endogenous Wnt signaling is also activated during this process, and these Wnt-activated cells are responsible for the following repair response. R-spondin 2 (Rspo2) is a potent stem cell growth factor, which strongly potentiates Wnt/β-catenin signaling and plays a vital role in cell differentiation and regeneration. However, the role of Rspo2 during odontoblast differentiation in hDPSCs has not yet been completely understood. This study investigated the effects of Rspo2 on hDPSCs to provide therapeutic insight into dentin regeneration and reparative dentin formation. HDPSCs were extracted from human molars or premolars. Immunofluorescence staining and flow cytometric analysis were used to detect the mesenchymal stem cell markers in hDPSCs. EdU assay and Cell Counting Kit-8 (CCK-8) were performed to explore cell proliferation. The odontogenic differentiation levels were determined by measuring the mRNA and protein expression of DSPP, DMP-1, ALP, and BSP. Immunofluorescence staining was performed to detect the localization of β-catenin. The biological effects of Rspo2 on hDPSCs was investigated using the Lentivirus-based Rspo2 shRNA and recombined human Rspo2 (rhRspo2). Recombined human DKK-1 (rhDKK-1) and recombined human Wnt3a (rhWnt3a) were used for further investigation. The cells generated from human dental pulp expressed mesenchymal stem cell markers Vimentin, Stro-1, Nestin, C-kit, CD90, and CD73, while were negative for CD3, CD31, and CD34. The mRNA expression levels of the odontogenic-related genes DSPP, DMP-1, ALP, and BSP were upregulated in the rhRspo2 treated cells. Silencing Rspo2 suppressed the proliferation and differentiation of the hDPSCs. Blockade of Wnt signaling with DKK-1 inhibited Rspo2-induced activation of Wnt/β-catenin signaling and cell differentiation. The combined use of rhWnt3a and rhRspo2 created a synergistic effect to improve the activation of Wnt/β-catenin signaling. Rspo2 promoted the proliferation and odontogenic differentiation of hDPSCs by regulating the Wnt/β-catenin signaling pathway.

Bone morphogenetic proteins 2, 6, and 9 differentially regulate the osteogenic differentiation of immortalized preodontoblasts

Our study attempted to compare the efficacies of bone morphogenetic protein (BMP) 2, 6, and 9 in inducing osteogenic differentiation of preodontoblasts (PDBs). We immortalized PDBs by introducing a reversible SV40 T antigen-based immortalization system. Cell proliferation capability was examined by the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide assay. The effects of BMP2, 6, and 9 on the osteogenic differentiation of immortalized preodontoblasts (iPDBs) were measured by alkaline phosphatase (ALP) activity assays and alizarin red S staining. The expression of osteogenic markers was evaluated by semiquantitative real-time polymerase chain reaction analysis. To assess ectopic bone formation, rat-derived iPDBs were transfected in culture with adenoviral vectors designated Ad-BMP2, 6, and 9 and subcutaneously or intramuscularly injected into mice. Several BMPs retained endogenous expression in PDBs and regulated the mRNA expression of mineralized tissue-associated proteins. ALP activity and mineralized nodule formation were significantly increased in the Ad-BMP9-transfected group relative to the control group. In addition, the most significant hard tissue formation was in this group. The results indicated that BMP signaling was involved in the osteogenic differentiation of iPDBs. BMP9 could be an efficacious accelerant of the osteogenic differentiation of iPDBs.

Substrate Topography Regulates Differentiation of Annulus Fibrosus-Derived Stem Cells via CAV1-YAP-Mediated Mechanotransduction

Regeneration of annulus fibrosus (AF) through tissue engineering techniques shows promise as a treatment for patients with degenerative disc disease (DDD). Yet, it remains challenging because of the intrinsic heterogeneity of AF tissue and shortage of in-depth knowledge of its structure-function correlation. In the current study, we fabricated fibrous poly(ether carbonate urethane)urea (PECUU) scaffolds with various fiber sizes to mimic the microstructural feature of native AF and aimed to regulate the differentiation of AF-derived stem cells (AFSCs) by controlling the topographical cues of the scaffold. We found that the morphology of AFSCs varied significantly on scaffolds with various fiber sizes. Meanwhile, the expression of the phenotypic marker genes of outer AF was up-regulated on scaffolds with large fibers. Meanwhile, enhanced expression of the phenotypic marker genes of inner AF was seen on scaffolds with small fibers. Such topography-dependent gene expression in AFSCs approximated the biochemical profile of AF tissue in various zones. Moreover, cell spreading and nucleus translocation of Yes-associated protein (YAP) were facilitated with increased fiber size. Formation and maturation of focal adhesions of AFSCs were also promoted. We also found that Caveolin-1 (CAV1) positively modulated the mechano-responses of YAP in response to substrate topography. In conclusion, depending on the activation of the CAV1-YAP mechanotransduction axis, tuning the fiber size of scaffolds can effectively induce changes in cell shape, adhesions, and extracellular matrix expression. This work may therefore provide new insights in the design of novel materials toward AF tissue regeneration.

Mdm2 Promotes Odontoblast-like Differentiation by Ubiquitinating Dlx3 and p53

Dentin is an important structural component of the tooth. Odontoblast differentiation is an essential biological process that guarantees normal dentin formation, which is precisely regulated by various proteins. Murine double minute 2 (Mdm2) is an E3 ubiquitin ligase, and it plays a pivotal role in the differentiation of different cell types, such as osteoblasts and myoblasts. However, whether Mdm2 plays a role in odontoblast differentiation remains unknown. Here, we investigated the spatiotemporal expression of Mdm2 by immunostaining and found that Mdm2 was highly expressed in the odontoblasts and slightly in the dental papilla cells of mouse incisors and molars. Gene knockdown and overexpression experiments verified that Mdm2 promoted the odontoblast-like differentiation of mouse dental papilla cells (mDPCs). Intranuclear colocalization and physical interaction between Mdm2 and distal-less 3 (Dlx3), a transcription factor important for odontoblast differentiation, was found during the odontoblast-like differentiation of mDPCs by double immunofluorescence and immunoprecipitation. Mdm2 was proved to monoubiquitinate Dlx3, which enhanced the expression of Dlx3 target gene Dspp. In addition, p53, the canonical substrate of Mdm2, was validated to be also ubiquitinated but degraded by Mdm2 during the odontoblast-like differentiation of mDPCs. Gene knockdown experiments confirmed that p53 inhibited the odontoblast-like differentiation of mDPCs. p53 and Mdm2 double knockdown partially rescued the reduced odontoblast-like differentiation by knockdown of Mdm2 alone. Taken together, our study revealed that Mdm2 promoted the odontoblast-like differentiation of mDPCs by ubiquitinating both Dlx3 and p53. On one hand, the monoubiquitination of Dlx3 by Mdm2 led to upregulation of Dspp, which is a marker of the odontoblast differentiation. On the other hand, ubiquitination of p53 by Mdm2 resulted in its degradation, which eliminated the inhibitory effect of p53 on the odontoblast-like differentiation of mDPCs.

Sp1 promotes dental pulp stem cell osteoblastic differentiation through regulating noggin

Based on the high self-renewal ability and osteoblastic differentiation capacity, dental pulp stem cells (DPSCs) are suggested to be promising cell source for osteogenesis. Therefore, illustrating the mechanism of osteoblastic differentiation of DPSCs is required. This current study aims to illustrate the role and mechanism of Sp1 in regulating osteoblastic differentiation of DPSCs. In this study, we downregulated Sp1 in DPSCs and evaluated the osteoblastic differentiation by measuring Runx2 and OCN expression with Western blot analysis and by Alizarin red staining. Furthermore, we investigated the mechanism of Sp1 regulating noggin with Firefly luciferase reporter gene assay and ChIP assay, and correspondingly evaluated the function of noggin in Sp1-regulated osteoblastic differentiation of DPSCs. We found that knockdown of Sp1 inhibits the expression of ALP, Runx2, COL1A1 and OCN, and decreases ALP staining, Alizarin red staining. Sp1 binds to noggin promoter and inhibits noggin expression, thus correspondingly regulates DPSCs osteoblastic differentiation. In conclusion, our study revealed that Sp1 regulates DPSCs osteoblastic differentiation through noggin and that Sp1/noggin can provide new perspective for enhancing DPSCs osteogenesis.

A Critical Review on the Production of Electrospun Nanofibres for Guided Bone Regeneration in Oral Surgery

Nanofibre-based membranes or scaffolds exhibit high surface-to-volume ratio, which allows an improved cell adhesion, representing an attractive subgroup of biomaterials due to their unique properties. Among several techniques of nanofiber production, electrospinning is a cost-effective technique that has been, to date, attractive for several medical applications. Among these, guided bone regeneration is a surgical procedure in which bone regeneration, due to bone atrophy following tooth loss, is "guided" by an occlusive barrier. The membrane should protect the initial blood clot from any compression, shielding the bone matrix during maturation from infiltration of soft tissues cells. This review will focus its attention on the application of electrospinning (ELS) in oral surgery bone regeneration. Despite the abundance of published papers related to the electrospinning technique applied in the field of bone regeneration of the jaws, to the authors' knowledge, no articles report clinical application of these structures. Moreover, only a few records can be found with in vivo application. Therefore, no human studies have to date been detectable. New approaches such as multifunctional multilayering and coupling with bone promoting factors or antimicrobial agents, makes this technology very attractive. However, greater efforts should be made by researchers and companies to turn these results into clinical practice.

Nanotopography on titanium promotes osteogenesis via autophagy-mediated signaling between YAP and β-catenin

Nanostructured titanium implants are recognized for inducing osteogenesis, but the cell signal transductions related to topography are not fully understood. Implant topography is associated with the functionality of osteogenic transcription factors directed by β-catenin in the nucleus, and autophagic flux in the cytoplasm; YAP (Yes-associated protein) is implicated in the destruction of β-catenin in the cytoplasm and is susceptible to autophagic flux. This study investigated whether surface topography of the titanium implant modulates autophagy-lysosome degradation of cytoplasmic YAP. Titanium surfaces were modified with smooth, micro, or nanotopographies. Compared with the smooth and micro surfaces, nanotopography was associated with higher β-catenin nuclear translocation, osteogenic differentiation, and autophagy, and less cytoplasmic YAP. Blockade of the autophagy-lysosome pathway resulted in YAP retention in MC3T3-E1 cells. Cytoplasmic YAP restricted β-catenin nuclear translocation. In the nano surface group, β-catenin accumulation in the nucleus and expression of osteogenesis genes was improved. However, in the absence of cell-cell (confluent) contact, manipulation of YAP and β-catenin localization associated with topography-induced autophagy was lost. In summary, the osteogenesis observed in response to titanium implants with nanotopography involves a signaling link between YAP and β-catenin. STATEMENT OF SIGNIFICANCE: Titanium with rough topographical surfaces is extensively applied in orthopedic and dental clinics. However, the cellular response to topographies that promotes osteogenesis and underlying mechanisms are not fully understood. In this study, we modified titanium surfaces to produce smooth, micro, or nano topographies. Experiments indicated that the nanotopography induced a stronger autophagic response, leading to degraded cytoplasmic YAP. With the lower levels of YAP, β-catenin transported and accumulated in the nucleus to activate TCF/LEF transcription factors, resulting in stronger osteogenesis. Additionally, cell-cell contact was essential in the autophagy-mediated signaling link between YAP and β-catenin. Consequently, our investigation revealed a novel signal transduction in nanotopography-regulated osteogenesis, and supports the modification of biomaterial surfaces to maximize osseointegration.

Stathmin regulates the proliferation and odontoblastic/osteogenic differentiation of human dental pulp stem cells through Wnt/β-catenin signaling pathway

Odontoblastic/osteogenic differentiation of human dental pulp stem cells (hDPSCs) is a key factor in tooth and pulp regeneration, but its mechanism still remains unknown. The purpose of this research is to look into the mechanism by which Stathmin affects the proliferation and odontoblastic/osteogenic differentiation of hDPSCs, and whether the Wnt/β- catenin is related to this regulation. First, the Stathmin expression was inhibited by lentiviral vector, after that the transcriptome sequencing technology was used to screen the differentially expressed genes, then we found Wnt5a which related to the regulation of Wnt/β-catenin was regulated. Comparing with hDPSC in the control group, the shRNA-Stathmin group inhibited proliferation and odontoblastic/osteogenic differentiation. The result of molecular analysis indicated that the Wnt/β-catenin was inhibited when Stathmin was silenced. After that, the shRNA-Stathmin group were added with LiCl (activator of Wnt/β-catenin), and the Wnt/β-catenin was significantly activated in β-catenin. After activation of the Wnt/β-catenin, the proliferation of hDPSCs was significantly increased and the expression of genes related to odontoblastic/osteogenic differentiation was also significantly increased. Taken together, these findings reveal for the first time that the Stathmin-Wnt/β-catenin plays a positive regulatory role in hDPSC proliferation and odontoblastic/osteogenic differentiation. SIGNIFICANCE: Transcriptome sequencing revealed that Stathmin interacts with Wnt/β-catenin signaling pathway-related proteins such as Wnt5a. At the same time, experiments have confirmed that Stathmin protein can affect the proliferation and odontogenetic differentiation of hDPSCs.The innovation of this paper is to link the Stathmin and Wnt/β-catenin signaling pathways for the first time, to explore the interaction of Stathmin and Wnt/β-catenin signaling pathways and the mechanism of this regulation on human dental pulp stem cells (hDPSCs) of odontoblastic/osteogenic differentiation and proliferation function. Especially for the regulation of odontoblastic/osteogenic differentiation, we have verified this mechanism at the molecular level and characterization leveland this regulation also provides new ideas for dental pulp tissue engineering. At the same time, more than 3000 proteins related to the change of Stathmin level were screened by transcriptome sequencing technology, which provided a possibility to further exploration of the regulation mechanism of Stathmin on various aspects of cell biological characteristics.

Analysis of the characteristics and expression profiles of coding and noncoding RNAs of human dental pulp stem cells in hypoxic conditions

BACKGROUND

Human dental pulp stem cell (DPSC)-mediated regenerative endodontics is a promising therapy for damaged teeth; however, the hypoxic environment in root canals can affect tissue regeneration. In this study, we investigate the characteristics and possible regulatory mechanisms of DPSC function under hypoxic conditions.

METHODS

Human DPSCs were cultured under normoxia (20% O₂) and hypoxia (3% O₂). DPSC proliferation and osteo/odontogenic differentiation potential were assessed by Cell Counting Kit-8 (CCK8) assay, carboxyfluorescein succinimidyl ester (CFSE) assay, alkaline phosphatase (ALP) activity, Alizarin red staining, real-time RT-PCR assays, and western blot analysis. Microarray and bioinformatic analyses were performed to investigate the differences in the mRNA, lncRNA, and miRNA expression profiles of DPSCs.

RESULTS

DPSCs exhibited a more powerful proliferation ability and lower osteo/odontogenic differentiation potential in hypoxic conditions. A total of 60 mRNAs (25 upregulated and 35 downregulated), 47 lncRNAs (20 upregulated and 27 downregulated), and 14 miRNAs (7 upregulated and 7 downregulated) in DPSCs were differentially expressed in the hypoxia group compared with the normoxia group. Bioinformatic analysis identified that 7 mRNAs (GRPR, ERO1L, ANPEP, EPHX1, PGD, ANGPT1, and NQO1) and 5 lncRNAs (AF085958, AX750575, uc002czn.2, RP3-413H6.2, and six-twelve leukemia (STL)) may be associated with DPSCs during hypoxia according to CNC network analysis, while 28 mRNAs (including GYS1, PRKACB, and NQO1) and 13 miRNAs (including hsa-miR-3916 and hsa-miR-192-5p) may be involved according to miRNA target gene network analysis. The depletion of one candidate lncRNA, STL, inhibited the osteo/odontogenic differentiation potentials of DPSCs.

CONCLUSIONS

Our results revealed that hypoxia could enhance the proliferation ability and impair the osteo/odontogenic differentiation potential of DPSCs in vitro. Furthermore, our results identified candidate coding and noncoding RNAs that could be potential targets for improving DPSC function in regenerative endodontics and lead to a better understanding of the mechanisms of hypoxia's effects on DPSCs.

Cellular Response to Surface Morphology: Electrospinning and Computational Modeling

Surface properties of biomaterials, such as chemistry and morphology, have a major role in modulating cellular behavior and therefore impact on the development of high-performance devices for biomedical applications, such as scaffolds for tissue engineering and systems for drug delivery. Opportunely-designed micro- and nanostructures provides a unique way of controlling cell-biomaterial interaction. This mini-review discusses the current research on the use of electrospinning (extrusion of polymer nanofibers upon the application of an electric field) as effective technique to fabricate patterns of micro- and nano-scale resolution, and the corresponding biological studies. The focus is on the effect of morphological cues, including fiber alignment, porosity and surface roughness of electrospun mats, to direct cell migration and to influence cell adhesion, differentiation and proliferation. Experimental studies are combined with computational models that predict and correlate the surface composition of a biomaterial with the response of cells in contact with it. The use of predictive models can facilitate the rational design of new bio-interfaces.

Nanoscale and Macroscale Scaffolds with Controlled-Release Polymeric Systems for Dental Craniomaxillofacial Tissue Engineering

Tremendous progress in stem cell biology has resulted in a major current focus on effective modalities to promote directed cellular behavior for clinical therapy. The fundamental principles of tissue engineering are aimed at providing soluble and insoluble biological cues to promote these directed biological responses. Better understanding of extracellular matrix functions is ensuring optimal adhesive substrates to promote cell mobility and a suitable physical niche to direct stem cell responses. Further, appreciation of the roles of matrix constituents as morphogen cues, termed matrikines or matricryptins, are also now being directly exploited in biomaterial design. These insoluble topological cues can be presented at both micro- and nanoscales with specific fabrication techniques. Progress in development and molecular biology has described key roles for a range of biological molecules, such as proteins, lipids, and nucleic acids, to serve as morphogens promoting directed behavior in stem cells. Controlled-release systems involving encapsulation of bioactive agents within polymeric carriers are enabling utilization of soluble cues. Using our efforts at dental craniofacial tissue engineering, this narrative review focuses on outlining specific biomaterial fabrication techniques, such as electrospinning, gas foaming, and 3D printing used in combination with polymeric nano- or microspheres. These avenues are providing unprecedented therapeutic opportunities for precision bioengineering for regenerative applications.