From Broadband to Electrochromic Notch Filters with Printed Monochiral Carbon Nanotubes

Ion-Exchange Doping of Semiconducting Single-Walled Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (SWCNTs) are a promising thermoelectric material with high power factors after chemical p- or n-doping. Understanding the impact of dopant counterions on charge transport and thermoelectric properties of nanotube networks is essential to further optimize doping methods and to develop better dopants. This work utilizes ion-exchange doping to systematically vary the size of counterions in thin films of small and large diameter, polymer-sorted semiconducting SWCNTs with AuCl3 as the initial p-dopant and investigates the impact of ion size on conductivity, Seebeck coefficients, and power factors. Larger anions are found to correlate with higher electrical conductivities and improved doping stability, while no significant effect on the power factors is found. Importantly, the effect of counterion size on the thermoelectric properties of dense SWCNT networks is not obscured by morphological changes upon doping. The observed trends of carrier mobilities and Seebeck coefficients can be explained by a random resistor model for the nanotube network that accounts for overlapping Coulomb potentials leading to the formation of an impurity band whose depth depends on the carrier density and counterion size. These insights can be applied more broadly to understand the thermoelectric properties of doped percolating disordered systems, including semiconducting polymers.

Tuning Electroluminescence from Functionalized SWCNT Networks Further into the Near-Infrared

Near-infrared electroluminescence from carbon-based emitters, especially in the second biological window (NIR-II) or at telecommunication wavelengths, is difficult to achieve. Single-walled carbon nanotubes (SWCNTs) have been proposed as a possible solution due to their tunable and narrowband emission in the near-infrared region and high charge carrier mobilities. Furthermore, the covalent functionalization of SWCNTs with a controlled number of luminescent sp3 defects leads to even more red-shifted photoluminescence with enhanced quantum yields. Here, we demonstrate that by tailoring the binding configuration of the introduced sp3 defects and hence tuning their optical trap depth, we can generate emission from polymer-sorted (6,5) and (7,5) nanotubes that is mainly located in the telecommunication O-band (1260-1360 nm). Networks of these functionalized nanotubes are integrated in ambipolar, light-emitting field-effect transistors to yield the corresponding narrowband near-infrared electroluminescence. Further investigation of the current- and carrier density-dependent electro- and photoluminescence spectra enables insights into the impact of different sp3 defects on charge transport in networks of functionalized SWCNTs.

Long-Term Stable Thermal Emission Modulator Based on Single-Walled Carbon Nanotubes

Dynamic control of a material's thermal emission could enable many emerging applications, such as thermal camouflage and infrared (IR) display. Low-dimensional carbon nanomaterials have shown great potential in these applications because of their tuneability in charge density via static gating or ionic intercalation. Herein, a thermal emission modulator based on single-walled carbon nanotubes (SWCNTs) is realized by ionic gating. The Fermi energy of the SWCNTs is shifted via the adsorption of ions on the surface, and the highest emissivity is observed at the neutral state while both P-type and N-type SWCNTs have a reduced emissivity. An emissivity modulation range is achieved approximately from 0.45 to 0.95 within the electrochemical window of the used ionic liquid. Thermal camouflage and IR display applications are then demonstrated by utilizing the tuneable thermal emissivity of the fabricated SWNCT films. More importantly, a single-layer structure allows effective dynamic control purely by static gating, without involving any ion interaction process that may cause structural damage, as observed in graphene and multi-walled nanotubes. Therefore, the SWCNT-based IR modulators exhibit long-term stability, with nearly identical modulation range and response time after 6000 dynamic tuning cycles, indicating great potential for practical applications.

Mid-Infrared Electrochromics Enabled by Intraband Modulation in Carbon Nanotube Networks

Tuneable infrared properties, such as transparency and emissivity, are highly desirable for a range of applications, including thermal windows and emissive cooling. Here, we demonstrate the use of carbon nanotube networks spray-deposited onto an ionic liquid-infused membrane to fabricate devices with electrochromic modulation in the mid-infrared spectrum, facilitating control of emissivity and apparent temperature. Such modulation is enabled by intraband transitions in unsorted single-walled carbon nanotube networks, allowing the use of scalable nanotube inks for printed devices. These devices are optimized by varying film thickness and sheet resistance, demonstrating the emissivity modulation (from ∼0.5 to ∼0.2). These devices and the understanding thereof open the door to selection criteria for infrared electrochromic materials based on the relationship between band structure, electrochemistry, and optothermal properties to enable the development of solution-processable large-area coatings for widespread thermal management applications.

Electrically controllable diffractive optical elements fabricated by direct laser writing on a carbon nanotube network film

A randomly connected single-walled carbon nanotube (CNT) network film is suggested as an optically homogenous thin film to implement a tunable diffractive optical element with a subwavelength thickness. A Fresnel zone plate (FZP) as a thin-film lens is successfully realized by mask-free direct laser writing onto the CNT network film with a thickness of 450 nm. The fabricated FZP exhibits an intense three-dimensional focus having lateral and axial focal sizes of 0.95λ and 7.10λ, respectively, at the wavelength of 1550 nm. Furthermore, we show that the intensities at focal points of the first and second diffraction orders can be significantly modulated by 72% and 40% through ion-gel gating between +1.8 V and -1.8 V. These results may offer the potential for electro-optic tunability in multifocal diffraction flat optics and the like.

Conductivity vs functionalization in single-walled carbon nanotube films

Diazo functionalization is a chemical method that changes the conductance of metallic single-walled carbon nanotubes (SWCNTs) by disrupting the C–C double bonds. Its application to native mixtures of metallic and semiconducting SWCNTs is a promising way of large-scale production of semiconducting SWCNTs for use in electronics. This has been well studied on isolated SWCNTs, but the implications on the conductivity of SWCNT materials are still unclear. Here, we study the conductivity of such functionalized SWCNT films with a progressively decreased metallic/semiconducting ratio in a wide range of temperatures (4–300 K) to unravel the charge transport mechanisms of metallic and semiconducting SWCNT subnetworks to show how these components participate in the total conductivity of the films. At low functionalization degree (below 0.2 mol%), the conductivity is dominated by a subnetwork of metallic SWCNTs through two parallel mechanisms: a Luttinger liquid mechanism and a Variable Range Hopping process. Higher functionalization (over 0.4 mol%) destroys the Luttinger liquid mechanism, and a second parallel Variable Range Hopping process arises, attributed to the conduction through the semiconducting SWCNTs. At these high functionalization degrees, the SWCNT film behaves as a material with the desired semiconducting properties.

Graphical abstract

We studied the conductivity of chemically functionalized Single Walled Carbon Nanotube films with a progressively decreased metallic/semiconducting ratio in a wide range of temperatures (4–300 K) to unravel the charge transport mechanisms of metallic and semiconducting SWCNT subnetworks to show how these components participate in the total conductivity of the films.

Enhancing Electrochemical Transistors Based on Polymer-Wrapped (6,5) Carbon Nanotube Networks with Ethylene Glycol Side Chains

Organic electrochemical transistors (ECTs) are an important building block for bioelectronics. To promote the required ion transport through the active layer, state-of-the-art semiconducting polymers feature hydrophilic ethylene glycol side chains that increase the volumetric capacitance and transconductance of the devices. Here, we apply this concept to polymer-wrapped single-walled carbon nanotubes (SWCNTs) as a high-mobility semiconducting material. We replace the polyfluorene copolymer (PFO-BPy), which is used for selectively dispersing semiconducting (6,5) SWCNTs and contains octyl side chains, by an equivalent polymer with tetraethylene glycol side chains. Aerosol-jet printed networks of these SWCNTs are applied as the active layer in water-gated ECTs. These show high hole mobilities (3-15 cm²·V^-1·s^-1), significantly improved volumetric capacitances and larger transconductances. Thin networks of SWCNTs reach (219 ± 16) F·cm^-1·V^-1·s^-1 as the product of mobility and volumetric capacitance. In situ photoluminescence measurements show more efficient quenching of the near-infrared fluorescence for nanotube networks with hydrophilic glycol side chains compared to those with hydrophobic alkyl side chains, thus corroborating more complete charging under bias. Overall, networks of semiconducting SWCNTs with such tailored wrapping polymers provide excellent device performance. Combined with their inherent mechanical flexibility and durability, they constitute a competitive material for bioelectronics.

Charge Transfer from Photoexcited Semiconducting Single-Walled Carbon Nanotubes to Wide-Bandgap Wrapping Polymer

As narrow optical bandgap materials, semiconducting single-walled carbon nanotubes (SWCNTs) are rarely regarded as charge donors in photoinduced charge-transfer (PCT) reactions. However, the unique band structure and unusual exciton dynamics of SWCNTs add more possibilities to the classical PCT mechanism. In this work, we demonstrate PCT from photoexcited semiconducting (6,5) SWCNTs to a wide-bandgap wrapping poly-[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(6,6')-(2,2'-bipyridine)] (PFO-BPy) via femtosecond transient absorption spectroscopy. By monitoring the spectral dynamics of the SWCNT polaron, we show that charge transfer from photoexcited SWCNTs to PFO-BPy can be driven not only by the energetically favorable E₃₃ transition but also by the energetically unfavorable E₂₂ excitation under high pump fluence. This unusual PCT from narrow-bandgap SWCNTs toward a wide-bandgap polymer originates from the up-converted high-energy excitonic state (E₃₃ or higher) that is promoted by the Auger recombination of excitons and charge carriers in SWCNTs. These insights provide new pathways for charge separation in SWCNT-based photodetectors and photovoltaic cells.

Probing Mobile Charge Carriers in Semiconducting Carbon Nanotube Networks by Charge Modulation Spectroscopy

Solution-processed networks of semiconducting, single-walled carbon nanotubes (SWCNTs) have attracted considerable attention as materials for next-generation electronic devices and circuits. However, the impact of the SWCNT network composition on charge transport on a microscopic level remains an open and complex question. Here, we use charge-modulated absorption and photoluminescence spectroscopy to probe exclusively the mobile charge carriers in monochiral (6,5) and mixed SWCNT network field-effect transistors. Ground-state bleaching and charge-induced trion absorption features as well as exciton quenching are observed depending on applied voltage and modulation frequency. Through correlation of the modulated mobile carrier density and the optical response of the nanotubes, we find that charge transport in mixed SWCNT networks depends strongly on the diameter and thus bandgap of the individual species. Mobile charges are preferentially transported by small bandgap SWCNTs especially at low gate voltages, whereas large bandgap species only start to participate at higher carrier concentrations. Our results demonstrate the excellent suitability of modulation spectroscopy to investigate charge transport in nanotube network transistors and highlight the importance of SWCNT network composition for their performance.

Ionic Liquid Gated Carbon Nanotube Saturable Absorber for Switchable Pulse Generation

Materials with electrically tunable optical properties offer a wide range of opportunities for photonic applications. The optical properties of the single-walled carbon nanotubes (SWCNTs) can be significantly altered in the near-infrared region by means of electrochemical doping. The states' filling, which is responsible for the optical absorption suppression under doping, also alters the nonlinear optical response of the material. Here, for the first time we report that the electrochemical doping can tailor the nonlinear optical absorption of SWCNT films and demonstrate its application to control pulsed fiber laser generation. With a pump-probe technique, we show that under an applied voltage below 2 V the photobleaching of the material can be gradually reduced and even turned to photoinduced absorption. Furthermore, we integrated a carbon nanotube electrochemical cell on a side-polished fiber to tune the absorption saturation and implemented it into the fully polarization-maintaining fiber laser. We show that the pulse generation regime can be reversibly switched between femtosecond mode-locking and microsecond Q-switching using different gate voltages. This approach paves the road toward carbon nanotube optical devices with tunable nonlinearity.

Brightening of Long, Polymer-Wrapped Carbon Nanotubes by sp3 Functionalization in Organic Solvents

The functionalization of semiconducting single-walled carbon nanotubes (SWNTs) with sp3 defects that act as luminescent exciton traps is a powerful means to enhance their photoluminescence quantum yield (PLQY) and to add optical properties. However, the synthetic methods employed to introduce these defects are currently limited to aqueous dispersions of surfactant-coated SWNTs, often with short tube lengths, residual metallic nanotubes, and poor film-formation properties. In contrast to that, dispersions of polymer-wrapped SWNTs in organic solvents feature unrivaled purity, higher PLQY, and are easily processed into thin films for device applications. Here, we introduce a simple and scalable phase-transfer method to solubilize diazonium salts in organic nonhalogenated solvents for the controlled reaction with polymer-wrapped SWNTs to create luminescent aryl defects. Absolute PLQY measurements are applied to reliably quantify the defect-induced brightening. The optimization of defect density and trap depth results in PLQYs of up to 4% with 90% of photons emitted through the defect channel. We further reveal the strong impact of initial SWNT quality and length on the relative brightening by sp3 defects. The efficient and simple production of large quantities of defect-tailored polymer-sorted SWNTs enables aerosol-jet printing and spin-coating of thin films with bright and nearly reabsorption-free defect emission, which are desired for carbon nanotube-based near-infrared light-emitting devices.

Trion-Polariton Formation in Single-Walled Carbon Nanotube Microcavities

We demonstrate the formation and tuning of charged trion-polaritons in polymer-sorted (6,5) single-walled carbon nanotubes in a planar metal-clad microcavity at room temperature. The positively charged trion-polaritons were induced by electrochemical doping and characterized by angle-resolved reflectance and photoluminescence spectroscopy. The doping level of the nanotubes within the microcavity was controlled by the applied bias and thus enabled tuning from mainly excitonic to a mixture of exciton and trion transitions. Mode splitting of more than 70 meV around the trion energy and emission from the new lower polariton branch corroborate a transition from exciton-polaritons (neutral) to trion-polaritons (charged). The estimated charge-to-mass ratio of these trion-polaritons is 200 times higher than that of electrons or holes in carbon nanotubes, which has exciting implications for the realization of polaritonic charge transport.