Thermally Activated Delayed Fluorescence in Polymer-Small-Molecule Exciplex Blends for Solution-Processed Organic Light-Emitting Diodes

Surfactant-induced hole concentration enhancement for highly efficient perovskite light-emitting diodes

It is widely acknowledged that constructing small injection barriers for balanced electron and hole injections is essential for light-emitting diodes (LEDs). However, in highly efficient LEDs based on metal halide perovskites, a seemingly large hole injection barrier is usually observed. Here we rationalize this high efficiency through a surfactant-induced effect where the hole concentration at the perovskite surface is enhanced to enable sufficient bimolecular recombination pathways with injected electrons. This effect originates from the additive engineering and is verified by a series of optical and electrical measurements. In addition, surfactant additives that induce an increased hole concentration also significantly improve the luminescence yield, an important parameter for the efficient operation of perovskite LEDs. Our results not only provide rational design rules to fabricate high-efficiency perovskite LEDs but also present new insights to benefit the design of other perovskite optoelectronic devices.

The Golden Age of Thermally Activated Delayed Fluorescence Materials: Design and Exploitation

Since the seminal report by Adachi and co-workers in 2012, there has been a veritable explosion of interest in the design of thermally activated delayed fluorescence (TADF) compounds, particularly as emitters for organic light-emitting diodes (OLEDs). With rapid advancements and innovation in materials design, the efficiencies of TADF OLEDs for each of the primary color points as well as for white devices now rival those of state-of-the-art phosphorescent emitters. Beyond electroluminescent devices, TADF compounds have also found increasing utility and applications in numerous related fields, from photocatalysis, to sensing, to imaging and beyond. Following from our previous review in 2017 ( Adv. Mater. 2017, 1605444), we here comprehensively document subsequent advances made in TADF materials design and their uses from 2017-2022. Correlations highlighted between structure and properties as well as detailed comparisons and analyses should assist future TADF materials development. The necessarily broadened breadth and scope of this review attests to the bustling activity in this field. We note that the rapidly expanding and accelerating research activity in TADF material development is indicative of a field that has reached adolescence, with an exciting maturity still yet to come.

HLCT-Type Acceptor Molecule-Based Exciplex System for Highly Efficient Solution-Processable OLEDs with Suppressed Efficiency Roll-Offs

Exciplex systems are promising candidates for thermally activated delayed fluorescence (TADF) molecules because of the small energy difference between the lowest singlet and triplet excited states (ΔEST). However, realizing high-efficiency and low-external-quantum-efficiency (EQE) roll-off in solution-processed organic light-emitting diodes (OLEDs) using an exciplex system remains a formidable challenge. In this study, two (HLCT)-type isomers with a spiro skeleton, 2-tBuspoCz-TRZ and 10-tBuspoCz-TRZ, are designed and synthesized as acceptors of exciplexes, where tert-butylspirofluorene indole is regarded as a donor and the triazine unit as an acceptor. Green exciplex emissions are observed for the 2-tBuspoCz-TRZ:TAPC and 10-tBuspoCz-TRZ:TAPC exciplexes, indicating distinct TADF characteristics with a very small ΔEST of 35 ± 5 meV. By using the TADF exciplex system based on the HLCT acceptor as an emitter, solution-processable OLEDs achieve a maximum external quantum efficiency (EQEmax) of 20.8%. Furthermore, a high EQEmax > 25% with a very low-efficiency roll-off (≈3.5% at 1000 cd m-2) is obtained for solution-processable phosphorescent devices using HLCT-based exciplexes as the host matrix of phosphors. This study paves the way for a novel strategy for designing acceptor exciplex molecules for effective TADF molecules and host matrices in solution-processable OLEDs.

Highly efficient blue quantum-dot light-emitting diodes based on a mixed composite of a carbazole donor and a triazine acceptor as the hole transport layer

Solution-processed thermally activated delayed fluorescence (TADF) exciplexes were employed as the hole transport layer (HTL) of blue quantum dot (QD) light-emitting diodes (QLEDs) by blending polymer donors of poly(N-vinylcarbazole) (PVK) with small molecular acceptors of 2,4,6-tris(biphenyl-3-yl)-1,3,5-triazine (T2T). As a result, the PVK:T2T HTL can harvest holes and electrons leaking from the QD active layer to form exciplex excitons and then this harvested exciton energy can be effectively transferred to the adjacent QD emitters through the Förster resonance energy-transfer process. Furthermore, the TADF exciplexes can enhance the hole mobility of the HTL due to the charge transfer process from the PVK donor to the T2T acceptor under an external electric field. The maximum current efficiency (CE) and external quantum efficiency (EQE) of the fabricated blue ZnCdS/ZnS core/shell QLEDs increase from 4.14 cd A^-1 and 7.33% for the PVK HTL to 7.73 cd A^-1 and 13.66% for the PVK:(5 wt%)T2T HTL, respectively. Our results demonstrate that the TADF exciplex HTL would be a facile strategy to design high-performance blue QLEDs.

Thermally Activated Delayed Fluorescence in Commercially Available Materials for Solution-Process Exciplex OLEDs

Organic light-emitting diodes (OLEDs) have developed rapidly in recent years. Thermally activated delayed fluorescent (TADF) molecules open a path to increase exciton collection efficiency from 25% to 100%, and the solution process provides an alternative technology to achieve lower cost OLEDs more easily. To develop commercial materials as exciplex hosts for high-performance and solution-processed OLEDs, we attempted to use 4,4′-cyclohexylidenebis[N,N-bis(4-methylphenyl)benzenamine (TAPC), poly(9-vinylcarbazole) (PVK), N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB), and poly(N,N’-bis-4-butylphenyl-N,N’-bisphenyl)benzidine (Poly-TPD) as the donors and 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (POT2T) as the acceptor to obtain the TADF effect. All donors and the acceptor were purchased from chemical suppliers. Our work shows that excellent TADF properties and high-efficiency exciplex OLEDs with low turn-on voltage and high luminance can be achieved with a simple combination of commercial materials.

Effect of TADF Assistance on Performance Enhancement in Solution Processed Green Phosphorescent OLEDs

Many methods have been proposed to increase the efficiency of organic electroluminescent materials applied as an emissive layer in organic light emitting diodes (OLEDs). Herein, we demonstrate enhancement of electroluminescence efficiency and operational stability solution processed OLEDs by employing thermally activated delayed fluorescence (TADF) molecules as assistant dopants in host-guest systems. The TADF assistant dopant (SpiroAC–TRZ) is used to facilitate efficient energy transfer from host material poly(N–vinylcarbazole) (PVK) to a phosphorescent Ir(III) emitter. We present the analysis of energy transfer and charge trapping—two main processes playing a crucial role in light generation in host–guest structure OLEDs. The investigation of photo-, electro- and thermoluminescence for the double-dopant layer revealed that assistant dopant does not only harvest and transfer the electrically generated excitons to phosphorescent emitter molecules but also creates exciplexes. The triplet states of formed PVK:SpiroAC–TRZ exciplexes are involved in the transport process of charge carriers and promote long–range exciton energy transfer to the emitter, improving the efficiency of electroluminescence in a single emissive layer OLED, resulting in devices with luminance exceeding 18 000 cd/m² with a luminous efficiency of 23 cd/A and external quantum efficiency (EQE) of 7.4%.

Synthesis and luminescence properties of two Ir(iii) complexes containing styrene-modified phenylpyridine ligands

Two green-emitting iridium(iii) complexes containing styrene-modified phenylpyridine ligands have been synthesized for OLEDs.

Spacer group-controlled luminescence and response of C3-symmetric triphenylamine derivatives towards force stimuli

Spacer groups have the ability to regulate the responses of two C₃-symmetric triphenylamine derivatives. Double bonds induced larger spectral shifts compared to that of single bonds.

Color-Tunable Thermally Activated Delayed Fluorescence in Oxadiazole-Based Acrylic Copolymers: Photophysical Properties and Applications in Ratiometric Oxygen Sensing

Polymer-based emitters are a promising route to the production of low-cost, scalable solution-processable luminescent materials. Here we describe a series of acrylic oxadiazole-based donor-acceptor monomers with tunable emission from blue to orange, with quantum yields as high as 96%. By introducing structural constraints that limit donor-acceptor orbital overlap, thermally activated delayed fluorescence (TADF) was observed in these materials. Polymerization by Cu(0) reversible deactivation radical polymerization (RDRP) gave high-molecular-weight copolymers (M_n > 20 kDa) with dispersities ranging from 1.10 to 1.45, using a room-temperature procedure with Cu wire as a catalyst. One of these materials, which had phenothiazine as donor moiety, exhibited conformationally dependent dual emission, giving a mixture of prompt fluorescence and delayed fluorescence peaks, whose relative ratios varied based on the amount of O₂ present during measurement. We demonstrate that this material can combine prompt and delayed fluorescence to act as a single-component, all-organic, ratiometric oxygen sensor without external calibrant. Application to ratiometric oxygen sensing is demonstrated both using a polymer thin film and via incorporation of this material into water-soluble polymer dots (Pdots), with a ratiometric response to O₂ throughout the range of partial pressures relevant to biological environments.

Organic Light-Emitting Diodes Based on Conjugation-Induced Thermally Activated Delayed Fluorescence Polymers: Interplay Between Intra- and Intermolecular Charge Transfer States

In this work, interactions between different host materials and a blue TADF polymer named P1 are systematically investigated. In photoluminescence, the host can have substantial impact on the photoluminescence quantum yield (PLQY) and the intensity of delayed fluorescence (Φ_DF), where more than three orders of magnitude difference of Φ_DF in various hosts is observed, resulting from a polarity effect of the host material and energy transfer. Additionally, an intermolecular charge-transfer (CT) emission with pronounced TADF characteristics is observed between P1 and 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (PO-T2T), with a singlet-triplet splitting of 7 meV. It is noted that the contribution of harvested triplets in monochrome organic light-emitting diodes (OLEDs) correlates with Φ_DF. For devices based on intermolecular CT-emission, the harvested triplets contribute ~90% to the internal quantum efficiency. The results demonstrate the vital importance of host materials on improving the PLQY and sensitizing Φ_DF of TADF polymers for efficient devices. Solution-processed polychrome OLEDs with a color close to a white emission are presented, with the emission of intramolecular (P1) and intermolecular TADF (PO-T2T:P1).

The Effect of Acceptor Structure on Emission Color Tuning in Organic Semiconductors with D-π-A-π-D Structures

A series of novel donor-acceptor D-π-A-π-D compounds were synthesized and characterized in order to determine the influence of different acceptor units on their properties. The introduction of acceptor moieties had a direct impact on the HOMO and LUMO energy levels. Fluorescence spectra of compounds can be changed by the choice of an appropriate acceptor and were shifted from the green to the near-infrared part of spectra. Due to observed concentration induced emission quenching, the green exciplex type host was used to evaluate the potential of synthesized molecules as emitters in organic light emitting diodes (OLEDs).

Red-emitting dyes based on phenothiazine-modified 2-hydroxychalcone analogues: mechanofluorochromism and gelation-induced emission enhancement

Red-emitting mechanofluorochromic dyes based on phenothiazine-modified 2-hydroxychalcone analogues.