Hollow Microspherical and Microtubular [3 + 3] Carbazole-Based Covalent Organic Frameworks and Their Gas and Energy Storage Applications

Carbazole-Bismaleimide Based Hyper-Cross-Linked Porous Organic Polymer for Efficient Iodine Capture

Radioactive iodine, a key waste product of nuclear energy, has been a significant concern among nuclear materials because of its high volatility and its ability to easily enter the human metabolism. Porous materials containing a large number of N-heterocyclic units such as carbazole in the skeletons use as effective adsorbents showing high iodine capture capacities. Herein, a new carbazole-bismaleimide-based hyper-cross-linked porous organic polymer (CzBMI-POP) was successfully prepared from a new tetra-armed carbazole-maleimide monomer (Bis-Cz(BMI)), which contains biscarbazole units and maleimide side groups. To produce CzBMI-POP, a free radical polymerization reaction was carried out via the unsaturated double bonds of Bis-Cz(BMI), enabling the construction of the N-rich porous skeleton in a simple and practical way. A high surface area carbazole-bismaleimide-based POP with polymer backbone having affinity for iodine uptake and sponge-like pore structures ranging from 2 to 20 nm showed iodine uptake capacity up to 215 wt %. The study highlights new opportunities to use POPs as iodine capture platform from nuclear waste, highlighting their potential for environmental remediation due to their easy synthesis and low cost.

A novel aptasensor integrating the DNA rolling nanomachine and Tb/COF/KB as dual signal amplifiers for kanamycin detection in foods

A novel aptasensor for the detection of kanamycin (KNM) was developed based on dual signal amplification through nanomaterials and DNA rolling machines. Firstly, a composite consisting of the covalent organic framework (COF), ketjen black (KB) and toluidine blue (Tb), was synthesized for signal generation. Tb molecules were loaded into the composite and combined with AuNPs to serve as tracer label. Secondly, the wDNA-loaded Fe3O4 magnetic beads (wDNA@MBs) as the DNA walking legs, with cleavage by Mg2+-driven DNAzyme, the DNA walking legs can move along the sDNA-decorated MBs surface, converting the target KNM into numerous output DNA strand, achieving sensitive amplification. With a low detection limit of 0.66 fM and a wide linear dynamic range from 10 fM to 100 nM, this aptasensor showed good results in the detection of KNM in real samples. Therefore, we envision it can provide a useful method for KNM detection in actual samples.

Carbazole and Triazine-Based D-A Covalent Organic Framework for Visible Light-Mediated Photocatalytic C-H Activation of Imidazopyridine and Indole

Two-dimensional donor-acceptor covalent organic frameworks (COFs) show considerable promise for metal-free and heterogeneous photocatalysis due to their efficient charge carrier separation and exciton transport upon photoexcitation. To date, numerous photocatalysts have been developed. However, they encounter several challenges, such as inadequate sunlight harvesting ability, poor photostability, and nonreusability. Fortunately, the emergence of COFs presents a promising solution to these problems. Herein, we report an imine-linked CzTA-TAPT COF featuring carbazole as the electron donor and triazine as the electron acceptor. Compared to the previously reported C2-linker-derived CzDA-TAPT COF, this C3-linked COF exhibits good charge separation and charge carrier transport. As a consequence, it demonstrates excellent photocatalytic applicability in the C-3 thiocyanation of imidazo[1,2-a]pyridine and indole under ambient conditions under visible light. Moreover, its broad substrate compatibility and high recyclability provide a green and sustainable approach for the thiocyanation of imidazopyridine and indole. To the best of our knowledge, this is the first heterogeneous catalyst demonstrated for the thiocyanation of imidazo[1,2-a]pyridine. These findings will inspire further research in the development of high-performance D-A COFs as photocatalysts for organic transformations.

Template-assisted synthesis of hollow anthraquinone-based covalent organic frameworks for aqueous zinc-ion hybrid supercapacitors

Anthraquinone-based hollow COFs were synthesized via a template-assisted method involving polystyrene nanospheres as the hard template, which enabled doubling the specific capacitance and energy density compared to non-templated COFs. Our approach can be extended to other COFs, offering a promising strategy for enhancing the performance of COF-based electrodes in energy storage applications.

Push-Pull Carbazole-Based Dyes: Synthesis, Strong Ultrafast Nonlinear Optical Response, and Effective Photoinitiation for Multiphoton Lithography

The present work reports on the ultrafast nonlinear optical (NLO) properties of a series of D-π-Α and D-A push-pull carbazole-based dyes and establishes a correlation between these properties and their efficiency for potential photonic and optoelectronic applications such as multiphoton lithography (MPL). The ultrafast NLO properties of the studied dyes are determined by two distinct experimental techniques, Z-scan and pump-probe optical Kerr effect (OKE), employing 246 fs laser pulses at 515 nm. The results indicate that chemical functionalization of the carbazole moiety with various strong electron-donating and/or electron-withdrawing groups, such as benzene, styrene, 4-bromostyrene, nitrobenzene, trimethyl isocyanurate, methyl, and indane-1,3-dione, can result in a controlled and significant enhancement of the NLO absorptive and refractive responses. In the context of potential applications, the efficiency of carbazole-based organic materials as photoinitiators (PIs) for MPL applications is demonstrated. The fabricated woodpile microstructure using chemically functionalized carbazole as a PI demonstrates improvements in both feature size and MPL efficiency compared to that using unfunctionalized carbazole as a PI. This is attributed to the efficient charge transfer resulting from chemical functionalization, which leads to a substantial increase (approximately 1 order of magnitude) in the values of the imaginary part of the second-order hyperpolarizability (Imγ) and the two-photon absorption cross section (σ). The achieved feature size of 280 nm is comparable to that obtained with other widely used PIs in MPL applications. Additionally, owing to the strong NLO properties of the studied functionalized carbazole, they could also be promising candidates for further applications in photonics and optoelectronics.

An origami microfluidic paper device based on core-shell Cu@Cu2S@N-doped carbon hollow nanocubes

BACKGROUD

The global prevalence of diabetes mellitus, a serious chronic disease with fatal consequences for millions annually, is of utmost concern. The development of efficient and simple devices for monitoring glucose levels is of utmost significance in managing diabetes. The advancement of nanotechnology has resulted in the indispensable utilization of advanced nanomaterials in high-performance glucose sensors. Modulating the morphology and intricate composition of transition metals represents a viable approach to exploit their structure/function correlation, thereby achieving optimal electrocatalytic performance of the synthesized catalysts.

RESULTS

Herein, a sensitive and rapid Cu-encapsulated Cu2S@nitrogen-doped carbon (Cu@Cu2S@N-C) hollow nanocubes-functionalized microfluidic paper-based analytical device (μ-PAD) was fabricated. Through a delicate sacrificial template/interface technique and thermal decomposition, inter-connected hollow networks were formed to boost the active sites, and the carbon shell was coated to protect Cu from being oxidation. For application, the constructed μ-PAD is used for glucose sensing utilizing an origami automated sample pretreatment system enabled by a simple application of strong alkaline solution on wax paper. Under optimal circumstances, the Cu@Cu2S@N-C electrochemical biosensor exhibits broad detection range of 2-7500 μM (R2 = 0.996) with low detection limit of 0.16 μM (S/N = 3) and high sensitivity of 1996 μA mM-1 cm-2. Additionally, the constructed μ-PAD also exhibited excellent selectivity, stability, and reproducibility.

SIGNIFICANCE

By rationally designing the double-shell hollow nanostructure and introducing Cu-encapsulated inner layer, the synthesized Cu@Cu2S@N-C hollow nanocubes show large specific surface area, short diffusion channels, and high stability. The proposed origami μ-PAD has been successfully applied to serum samples without any additional sample preparation steps for glucose determination, offering a new perspective for early nonenzymatic glucose diagnosis.

Covalent Organic Frameworks Meet Titanium Oxide

In order to expand the applicability of materials and improve their performance, the combined use of different materials has increasingly been explored. Among these materials, inorganic-organic hybrid materials often exhibit properties superior to those of single materials. Covalent organic frameworks (COFs) are famous crystalline porous materials constructed by organic building blocks linked by covalent bonds. In recent years, the combination of COFs with other materials has shown interesting properties in diverse fields, and the composite materials of COFs and TiO2 have been investigated more and more. These two outstanding materials are combined through covalent bonding, physical mixing, and other methods and exhibit excellent performance in various fields, including photocatalysis, electrocatalysis, sensors, separation, and energy storage and conversion. In this Review, the current preparation methods and applications of COF-TiO2 hybrid materials are introduced in detail, and their future development and possible problems are discussed and prospected, which is of great significance for related research. It is believed that these interesting hybrid materials will show greater application value as research progresses.

An Appraisal for Providing Charge Transfer (CT) Through Synthetic Porous Frameworks for their Semiconductor Applications

In recent years, there has been considerable focus on the development of charge transfer (CT) complex formation as a means to modify the band gaps of organic materials. In particular, CT complexes alternate layers of aromatic molecules with donor (D) and acceptor (A) properties to provide inherent electrical conductivity. In particular, the synthetic porous frameworks as attractive D-A components have been extensively studied in recent years in comparison to existing D-A materials. Therefore, in this work, the synthetic porous frameworks are classified into conjugated microporous polymers (CMPs), covalent organic frameworks (COFs), and metal-organic frameworks (MOFs) and compare high-quality materials for CT in semiconductors. This work updates the overview of the above porous frameworks for CT, starting with their early history regarding their semiconductor applications, and lists CT concepts and selected key developments in their CT complexes and CT composites. In addition, the network formation methods and their functionalization are discussed to provide access to a variety of potential applications. Furthermore, several theoretical investigations, efficiency improvement techniques, and a discussion of the electrical conductivity of the porous frameworks are also highlighted. Finally, a perspective of synthetic porous framework studies on CT performance is provided along with some comparisons.

Covalent-Organic-Framework-Modified Quartz Crystal Microbalance Sensor for Selective Detection of Hazardous Formic Acid

Covalent organic frameworks (COFs) are a novel family of porous crystalline materials utilized in various advanced applications. However, applying COFs as a hazardous organic acid gas sensor is substantial but still challenging. Herein, a phenylenediamine-based covalent organic framework (TPDA-TPB COF) featuring excellent crystallinity, ultrastable thermal stability, and high surface area was successfully constructed. Then, the TPDA-TPB COF-modified quartz crystal microbalance (QCM) sensor is fabricated by immobilizing the TPDA-TPB COF thin film on the gold-QCM chip. The fabricated TPDA-TPB COF-modified QCM sensor demonstrates a rapid response, excellent reproducibility, high selectivity, and sensitivity to formic gas, arising from hydrogen-bonding interactions between formic acid and the outermost layer of the TPDA-TPB COF, as determined by extensive analysis and density functional theory calculations. The basic sites of the TPDA-TPB COF, which are numerous due to its high nitrogen content, and the carboxylic acid groups present in formic acid exhibit efficient interactions. The sensitivity of the TPDA-TPB COF-modified QCM sensor was found to be 7.75 Hz ppm-1 at standard room temperature and pressure conditions, with a limit of detection (LOD) of formic acid down to 1.18 ppm, which is significantly below the workplace olfactory threshold limit of 5.0 ppm established by the Occupational Safety and Health Administration. The TPDA-TPB COF-modified QCM sensor exhibits remarkable detecting capabilities, making it highly attractive for detecting organic acid vapors in diverse applications that require superior performance.

Covalent Organic Framework/Graphene Hybrids: Synthesis, Properties, and Applications

To address current energy crises and environmental concerns, it is imperative to develop and design versatile porous materials ideal for water purification and energy storage. The advent of covalent organic frameworks (COFs), a revolutionary terrain of porous materials, is underscored by their superlative features such as divinable structure, adjustable aperture, and high specific surface area. However, issues like inferior electric conductivity, inaccessible active sites impede mass transfer and poor processability of bulky COFs restrict their wider application. As a herculean stride forward, COF/graphene hybrids amalgamate the strengths of their constituent components and have in consequence, enticed significant scientific intrigue. Herein, the current progress on the structure and properties of graphene-based materials and COFs are systematically outlined. Then, synthetic strategies for preparing COF/graphene hybrids, including one-pot synthesis, ex situ synthesis, and in situ growth, are comprehensively reviewed. Afterward, the pivotal attributes of COF/graphene hybrids are dissected in conjunction with their multifaceted applications spanning adsorption, separation, catalysis, sensing, and energy storage. Finally, this review is concluded by elucidating prevailing challenges and gesturing toward prospective strides within the realm of COF/graphene hybrids research.

Topological Analysis and Structural Determination of 3D Covalent Organic Frameworks

3D covalent organic frameworks (3D COFs) constitute a new type of crystalline materials that consist of a range of porous structures with numerous applications in the fields of adsorption, separation, and catalysis. However, because of the complexity of the three-periodic net structure, it is desirable to develop a thorough structural comprehension, along with a means to precisely determine the actual structure. Indeed, such advancements would considerably contribute to the rational design and application of 3D COFs. In this review, the reported topologies of 3D COFs are introduced and categorized according to the configurations of their building blocks, and a comprehensive overview of diffraction-based structural determination methods is provided. The current challenges and future prospects for these materials will also be discussed.

A review of recent advancement in covalent organic framework (COFs) synthesis and characterization with a focus on their applications in antibacterial activity

The primary objective of this review is to present a comprehensive examination of the synthesis, characterization, and antibacterial applications of covalent organic frameworks (COFs). COFs represent a distinct category of porous materials characterized by a blend of advantageous features, including customizable pore dimensions, substantial surface area, and adaptable chemical properties. These attributes position COFs as promising contenders for various applications, notably in the realm of antibacterial activity. COFs exhibit considerable potential in the domain of antibacterial applications, owing to their amenability to functionalization with antibacterial agents. The scientific community is actively exploring COFs that have been imbued with metal ions, such as copper or silver, given their observed robust antibacterial properties. These investigations strongly suggest that COFs could be harnessed effectively as potent antibacterial agents across a diverse array of applications. Finally, COFs hold immense promise as a novel class of materials for antibacterial applications, shedding light on the synthesis, characterization, and functionalization of COFs tailored for specific purposes. The potential of COFs as effective antibacterial agents beckons further exploration and underscores their potential to revolutionize antibacterial strategies in various domains.

Pyrolysis Free Out-of-Plane Co-Single Atomic Sites in Porous Organic Photopolymer Stimulates Solar-Powered CO2 Fixation

Herein, a facile strategy is illustrated to develop pyrolysis-free out-of-plane coordinated single atomic sites-based M-POP via a one-pot Friedel Craft acylation route followed by a post-synthetic metalation. The optimized geometry of the Co@BiPy-POP clearly reveals the presence of out-of-plane Co-single atomic sites in the porous backbone. This novel photopolymer Co@BiPy-POP shows extensive π-conjugations followed by impressive light harvesting ability and is utilized for photochemical CO2 fixation to value-added chemicals. A remarkable conversion of styrene epoxide (STE) to styrene carbonate (STC) (≈98%) is obtained under optimized photocatalytic conditions in the existence of promoter tert-butyl ammonium bromide (TBAB). Synchrotron-based X-ray adsorption spectroscopy (XAS) analysis reveals the single atom coordination sites along with the metal (Co) oxidation number of +2.16 in the porous network. Moreover, in situ diffuse reflectance spectroscopy (DRIFTS) and electron paramagnetic resonance (EPR) investigations provide valuable information on the evolution of key reaction intermediates. Comprehensivecomputational analysis also helps to understand the overall mechanistic pathway along with the interaction between the photocatalyst and reactants. Overall, this study presents a new concept of fabricating porous photopolymers based on a pyrolysis-free out-of-plane-coordination strategy and further explores the role of single atomic sites in carrying out feasible CO2 fixation reactions.

Rapid and selective removal of aristolochic acid I in natural products by vinylene-linked iCOF resins

Rapid, efficient, and selective removal of toxicants such as aristolochic acid I (AAI) from complex natural product systems is of great significance for the safe use of herbal medicines or medicine-food plants. Addressing this challenge, we develop a high-performance separation approach based on ionic covalent organic frameworks (iCOFs) to separate and remove AAI. Two vinylene-linked iCOFs (NKCOF-46-Br- and NKCOF-55-Br-) with high crystallinity are fabricated in a green and scalable fashion via a melt polymerization synthesis method. The resulting materials exhibit a uniform morphology, high stability, fast equilibrium time, and superior affinity and selectivity for AAI. Compared to conventional separation media, NKCOF-46-Br- and NKCOF-55-Br- achieve the record high adsorption capacities of 246.0 mg g-1 and 178.4 mg g-1, respectively. Various investigations reveal that the positively charged framework and favorable pore microenvironment of iCOFs contribute to their high selectivity and adsorption efficiency. Moreover, the iCOFs exhibit excellent biocompatibility by in vivo toxicity assays. This study paves a new avenue for the rapid, selective and efficient removal of toxicants from complex natural systems.

Research progress of the combination of COFs materials with food safety detection

Covalent organic frameworks (COFs) have received lots of attention due to their multiple advantages such as high specific surface area, controlled pore size, and excellent stability. When detecting food contaminants, the matrix effect brought by complex food samples can significantly affect the accuracy of the results. How to attenuate matrix effect has always been a major challenge. Utilizing the advantages of COFs and applying them to detect food contaminants is currently a key research direction. The aim of this work is to provide a systematic summary of sample pretreatment techniques and detection techniques combined with COFs, which include almost all current techniques combined with COFs. In addition, the principles of combining COFs with different techniques are explained. Finally, the research foci and development direction of COFs in food contaminant detection are discussed. This is an important reference for the future development of food safety and the design of COFs.

Facile synthesis of spherical covalent organic frameworks for enrichment and quantification of aryl organophosphate esters in mouse serum and tissues

Here, an imine-linked-based spherical covalent organic framework (COF) was prepared at room temperature. The as-synthesized spherical COF served as an adsorbent in dispersive solid-phase extraction (dSPE), by its virtue of great surface area (1542.68 m2 /g), regular distribution of pore size (2.95 nm), and excellent stability. Therefore, a simple and high-efficiency dispersive solid phase extraction method based on a spherical COF coupled with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established to determine aryl organophosphate esters in biological samples. This approach displayed favorable linearity in the range of 10.0-1000.0 ng/L (r > 0.9989), a high signal enhancement factor (58.8-181.8 folds) with low limits of detection (0.3-3.3 ng/L). Moreover, it could effectively eliminate complex matrix interference to accurately extract seven aryl organophosphate esters from mouse serum and tissue samples with spiked recoveries of 82.0%-117.4%. The as-synthesized spherical COF has been successfully applied in sample preparation. The dSPE-HPLC-MS/MS method based on a spherical COF has potential application to study the pollutants' metabolism in vivo.

New two-dimensional nanocomposites combined with target-induced strategy in an electrochemical aptasensor for sensitive determination of sulfadimethoxine

Ni-Zn bimetallic organic framework nanosheets (NiZn-MOF NSs) were modified onto PEI-functionalized MXene for the first time. The combination of the two kinds of nanosheets forms a sensing platform with superior conductivity and biocompatibility. On this basis, a highly sensitive biosensor was developed for the determination of sulfadimethoxine (SDM). Furthermore, Au and Mn nanoparticles decorated reduced graphene oxide (Au-Mn/rGO) was introduced as a signal hindering molecule under the target-induced amplification strategy. When the Au-Mn/rGO-labelled SDM-binding aptamer (Au-Mn/rGO-SBA) specifically bound to target SDM, it detached from the electrode, thereby further amplifying the electrochemical signal of [Fe(CN)6]3-/4-. The developed aptasensor for SDM showed excellent response signals in the range 1 pg mL-1 to 100 ng mL-1, with a limit of detection (LOD) as low as 0.22 pg mL-1. Significantly, the proposed sensor also showed satisfactory results in milk samples with recoveries ranging from 87.0 to 96.4% and RSD from 1.5 to 5.1%, which is believed to be useful in food safety assays.

Simple and Efficient Hydrogen Bond-Assisted Unit Exchange for Constructing Highly Soluble Covalent Organic Frameworks

The majority of COFs synthesized using current methods exist as insoluble powders, which is unfavorable for processing and molding and greatly limits their practical applications. The syntheses of solution-processable or soluble COFs are challenging but hold immense promise and potential. Herein, for the first time, we have developed a simple and high-efficiency solvothermal-treated unit exchange approach to convert insoluble COF powders into smaller, highly soluble COFs via a hydrogen bond-assisted strategy. Due to the enhanced backbone-solvent hydrogen-bonding interactions between COFs and protic solvents and the effect of grain size reduction, the COFs after unit exchange can be easily dissolved in various protic solvents while remaining as insoluble powders in nonprotic solvents. The obtained soluble COFs exhibit remarkable fluorescence quenching upon detection of iodine in aqueous solution, with a detection limit as low as 75 nM, and can be fabricated into membranes for the efficient treatment of iodine-contaminated solutions.

Vinylene-Linked Emissive Covalent Organic Frameworks for White-Light-Emitting Diodes

Covalent organic frameworks (COFs) have gained considerable attention due to their highly conjugated π-skeletons, rendering them promising candidates for the design of light-emitting materials. In this study, we present two vinylene-linked COFs, namely, VL-COF-1 and VL-COF-2, which were synthesized through the Knoevenagel condensation of 2,4,6-trimethyl-1,3,5-triazine with terephthalaldehyde or 4,4'-biphenyldicarboxaldehyde. Both VL-COF-1 and VL-COF-2 exhibited excellent chemical and thermal stability. The presence of vinylene linkages between the constituent building blocks in these COFs resulted in broad excitation and emission properties. Remarkably, the designed VL-COFs demonstrated bright emission, fast fluorescence decay, and high stability, making them highly attractive for optoelectronic applications. To assess the potential of these VL-COFs in practical devices, we fabricated white-light-emitting diodes (WLEDs) coated with VL-COF-1 and VL-COF-2. Notably, the WLEDs coated with VL-COF-1 achieved high-quality white light emission, closely approximating standard white light. The promising performance of VL-COF-coated WLEDs suggests the feasibility of utilizing COF materials for stable and efficient lighting applications.

Combinatorial Synthesis of Covalent Organic Framework Particles with Hierarchical Pores and Their Catalytic Application

Precise tailoring of the aggregation state of covalent organic frameworks (COFs) to form a hierarchical porous structure is critical to their performance and applications. Here, we report a one-pot and one-step strategy of using dynamic combinatorial chemistry to construct imine-based hollow COFs containing meso- and macropores. It relies on a direct copolymerization of three or more monomers in the presence of two monofunctional competitors. The resulting particle products possess high crystallinity and hierarchical pores, including micropores around 0.93 nm, mesopores widely distributed in the range of 3.1-32 nm, and macropores at about 500 nm, while the specific surface area could be up to 748 m2·g-1, with non-micropores accounting for 60% of the specific surface area. The particles demonstrate unique advantages in the application as nanocarriers for in situ loading of Pd catalysts at 93.8% loading efficiency in the copolymerization of ethylene and carbon monoxide. The growth and assembly of the copolymer could thus be regulated to form flower-shaped particles, efficiently suppressing the fouling of the reactor. The copolymer's weight-average molecular weight and the melting temperature are also highly improved. Our method provides a facile way of fabricating COFs with hierarchical pores for advanced applications in catalysis.

Thienylene combined with pyridylene through planar triazine networks for applications as organic oxygen reduction reaction electrocatalysts

Covalent triazine networks are interesting candidates for organic electrocatalytic materials due to their tunable, durable and sustainable nature. However, the limited availability of molecular designs that ensure both two-dimensionality and functional groups in the π-conjugated plane has hindered their development. In this work, a layered triazine network composed of thiophene and pyridine ring was synthesized by the novel mild liquid phase condition. The resulting network showed layered nature since its intramolecular interaction stabilized its planar conformation. The connection on the 2-position of the heteroaromatic ring prevents steric hindrance. The simple acid treatment method could be used to exfoliate the networks, resulting in high yields of nanosheets. The planar triazine network showed superior electrocatalytic properties for the oxygen reduction reaction in the structure-defined covalent organic networks.

Design and synthesis of metal-free ethene-based covalent organic framework photocatalysts for efficient, selective, and long-term stable CO2 conversion into methane

The efficient and selective photocatalytic CO₂ conversion into higher-valued hydrocarbon products (e.g., methane and ethane) over covalent organic frameworks (COFs) remains a challenge, with all previously reported attempts producing carbon monoxide as the dominant product. Herein, we report a new ethene-based COF, through polycondensation of electron-rich (E)-1,2‑diphenylethene and 1,3,6,8‑tetraphenylpyrene units. The synthesized ethene-based COF functioned as an efficient metal-free photocatalyst for the conversion of CO₂ into methane under visible light irradiation, with a selectivity of 100 %, a production rate of 14.7 µmol g^-1h^-1, and an apparent quantum yield of c.a. 0.99 % at 489.5 nm, which are the most promising values reported for CO₂ conversion by a metal-free COF photocatalyst, without any support from a co-catalyst. The carbon origin of CH₄ product is confirmed by isotope tracer ¹³CO₂ experiment. Moreover, the photocatalytic system consistently produces methane for > 14 h with recyclability.

Electrically Conductive Carbazole and Thienoisoindigo-Based COFs Showing Fast and Stable Electrochromism

Thienothiophene thienoisoindigo (ttTII)-based covalent organic frameworks (COFs) have been shown to offer low band gaps and intriguing optical and electrochromic properties. So far, only one tetragonal thienothiophene thienoisoindigo-based COF has been reported showing stable and fast electrochromism and good coloration efficiencies. We have developed two novel COFs using this versatile and nearly linear ttTII building block in a tetragonal and a hexagonal framework geometry to demonstrate their attractive features for optoelectronic applications of thienoisoindigo-based COFs. Both COFs exhibit good electrical conductivities, show promising optical absorption features, are redox-active, and exhibit a strong electrochromic behavior when applying an external electrical stimulus, shifting the optical absorption even farther into the NIR region of the electromagnetic spectrum and achieving absorbance changes of up to 2.5 OD. Cycle-stable cyclic voltammograms with distinct oxidation and reduction waves reveal excellent reversibility and electrochromic switching over 200 cycles and confirm the high stability of the frameworks. Furthermore, high coloration efficiencies in the NIR region and fast switching speeds for coloration/decoloration as fast as 0.75 s/0.37 s for the Cz-ttTII COF and 0.61 s/0.29 s for the TAPB-ttTII COF at 550 nm excitation were observed, outperforming many known electrochromic materials, and offering options for a great variety of applications, such as stimuli-responsive coatings, optical information processing, or thermal control.

Hydroxyl-Functionalized Covalent Organic Frameworks as High-Performance Supercapacitors

Covalent organic frameworks (COFs) have attracted significant interest because of their heteroatom-containing architectures, high porous networks, large surface areas, and capacity to include redox-active units, which can provide good electrochemical efficiency in energy applications. In this research, we synthesized two novel hydroxy-functionalized COFs-TAPT-2,3-NA(OH)_2, TAPT-2,6-NA(OH)₂ COFs-through Schiff-base [3 + 2] polycondensations of 1,3,5-tris-(4-aminophenyl)triazine (TAPT-3NH₂) with 2,3-dihydroxynaphthalene-1,4-dicarbaldehyde (2,3-NADC) and 2,6-dihydroxynaphthalene-1,5-dicarbaldehyde (2,6-NADC), respectively. The resultant hydroxy-functionalized COFs featured high BET-specific surface areas up to 1089 m² g^-1, excellent crystallinity, and superior thermal stability up to 60.44% char yield. When used as supercapacitor electrodes, the hydroxy-functionalized COFs exhibited electrochemical redox activity due to the presence of redox-active 2,3-dihydroxynaphthalene and 2,6-dihydroxynaphthalene in their COF skeletons. The hydroxy-functionalized COFs showed specific capacitance of 271 F g^-1 at a current density of 0.5 A g^-1 with excellent stability after 2000 cycles of 86.5% capacitance retention. Well-known pore features and high surface areas of such COFs, together with their superior supercapacitor performance, make them suitable electrode materials for use in practical applications.

Molecular Exchange of Dynamic Imine Bond for the Etching of Polymer Particles

The underlying trend of colloidal synthesis has focused on extending the structure and composition complexity of colloidal particles. Hollow and yolk-shell particles are successful examples that have potential applications in frontier fields. In this paper, we develop a facile and controllable etching method based on the molecular exchange of the dynamic imine bond to generate cavities in polymer particles. Starting from boronate ester polymer particles and inorganic@boronate core-shell particles with the imine bonds incorporated in the polymer networks, our etching method easily affords hollow and yolk-shell particles with tunable shell thicknesses. The molecular exchange dynamics analysis indicates that guest amine molecules cause the reconstruction of imine bonds and the leakage of molecular and oligomer fragments, resulting in the formation of the hollow structure. This molecular exchange-based etching method may be of interest in the construction of polymer architectures with increased composition and structure complexities. This article is protected by copyright. All rights reserved.

Landscaping Covalent Organic Framework Nanomorphologies

The practical utilization of covalent organic frameworks (COFs) with manipulation at the atomic and molecular scale often demands their assembly on the nano-, meso-, and macroscale with precise control. Consequently, synthetic approaches that establish the ability to control the nucleation and growth of COF crystallites and their self-assembly to desired COF nanomorphologies have drawn substantial attention from researchers. On the basis of the dimensionality of the COF morphologies, we can categorize them into zero- (0-D), one- (1-D), two- (2-D), and three-dimensional (3-D) nanomorphologies. In this perspective, we summarize the reported synthetic strategies that enable precise control of the COF nanomorphologies' size, shape, and dimensionality and reveal the impact of the dimensionalities in their physicochemical properties and applications. The aim is to establish a synergistic optimization of the morphological dimensionality while keeping the micro- or mesoporosity, crystallinity, and chemical functionalities of the COFs in perspective. A detailed knowledge along the way should help us to enrich the performance of COFs in a variety of applications like catalysis, separation, sensing, drug delivery, energy storage, etc. We have discussed the interlinking between the COF nanomorphologies via the transmutation of the dimensionalities. Such dimensionality transmutation could lead to variation in their properties during the transition. Finally, the concept of constructing COF superstructures through the combination of two or more COF nanomorphologies has been explored, and it could bring up opportunities for developing next-generation innovative materials for multidisciplinary applications.

Crystalline Covalent Triazine Frameworks with Fibrous Morphology via a Low-Temperature Polycondensation of Planar Monomer

The morphology regulation of covalent triazine frameworks (CTFs) is a great challenge, which may be due to the difficulty in controlling its morphology by traditional synthesis methods. Herein, a general approach to fabricate morphology controllable CTFs by a mild polycondensation reaction in mixed solvents without any templating agents is reported. As a proof of concept, a type of crystalline CTFs with distinctive fibrous morphology (MS-F-CTF-1) (MS: Mixed Solvent; F: Fibrous Morphology) is developed by adjusting the ratio of mixed solvents to control the solubility of monomers, so that the nucleation, crystal growth, and subsequent self-assembly are controlled, which facilitates the formation of fibrous morphology. The resultant crystalline MS-F-CTF-1 shows uniform fibrous morphology with a diameter of about 100 nm and a length of several micrometers. Notably, the fibrous morphology of CTFs can efficiently improve the photocatalytic hydrogen evolution performance, in which the hydrogen evolution rate can be boosted by about two times in comparison to block ones.

Ultrastable Covalent Triazine Organic Framework Based on Anthracene Moiety as Platform for High-Performance Carbon Dioxide Adsorption and Supercapacitors

Conductive and porous nitrogen-rich materials have great potential as supercapacitor electrode materials. The exceptional efficiency of such compounds, however, is dependent on their larger surface area and the level of nitrogen doping. To address these issues, we synthesized a porous covalent triazine framework (An-CTFs) based on 9,10-dicyanoanthracene (An-CN) units through an ionothermal reaction in the presence of different molar ratios of molten zinc chloride (ZnCl₂) at 400 and 500 °C, yielding An-CTF-10-400, An-CTF-20-400, An-CTF-10-500, and An-CTF-20-500 microporous materials. According to N₂ adsorption–desorption analyses (BET), these An-CTFs produced exceptionally high specific surface areas ranging from 406–751 m²·g⁻¹. Furthermore, An-CTF-10-500 had a capacitance of 589 F·g⁻¹, remarkable cycle stability up to 5000 cycles, up to 95% capacity retention, and strong CO₂ adsorption capacity up to 5.65 mmol·g⁻¹ at 273 K. As a result, our An-CTFs are a good alternative for both electrochemical energy storage and CO₂ uptake.

Metal Complexes of the Porphyrin-Functionalized Polybenzoxazine

New porphyrin-functionalized benzoxazine (Por-BZ) in high purity and yield was synthesized in this study based on ¹H and ¹³C NMR and FTIR spectroscopic analyses through the reduction of Schiff base formed from tetrakis(4-aminophenyl)porphyrin (TAPP) and salicylaldehyde and the subsequent reaction with CH₂O. Thermal properties of the product formed through ring-opening polymerization (ROP) of Por-BZ were measured using DSC, TGA and FTIR spectroscopy. Because of the rigid structure of the porphyrin moiety appended to the benzoxazine unit, the temperature required for ROP (314 °C) was higher than the typical Pa-type benzoxazine monomer (ca. 260 °C); furthermore, poly(Por-BZ) possessed a high thermal decomposition temperature (T_d10 = 478 °C) and char yield (66 wt%) after thermal polymerization at 240 °C. An investigation of the thermal and luminescence properties of metal–porphyrin complexes revealed that the insertion of Ni and Zn ions decreased the thermal ROP temperatures of the Por-BZ/Ni and Por-BZ/Zn complexes significantly, to 241 and 231 °C, respectively. The metal ions acted as the effective promoter and catalyst for the thermal polymerization of the Por-BZ monomer, and also improved the thermal stabilities after thermal polymerization.

Facile metal-free synthesis of pyrrolo[3,2-b]pyrrolyl-based conjugated microporous polymers for high-performance photocatalytic degradation of organic pollutants

An efficient and metal-free approach to the synthesis of new kinds of CMPs (pyrrolo[3,2-b]pyrrolyl-based CMPs) on a gram scale within a short time has been developed for remarkable adsorbent and photocatalytic degradation of organic pollutants.

Microporous Carbon and Carbon/Metal Composite Materials Derived from Bio-Benzoxazine-Linked Precursor for CO2 Capture and Energy Storage Applications

There is currently a pursuit of synthetic approaches for designing porous carbon materials with selective CO2 capture and/or excellent energy storage performance that significantly impacts the environment and the sustainable development of circular economy. In this study we prepared a new bio-based benzoxazine (AP-BZ) in high yield through Mannich condensation of apigenin, a naturally occurring phenol, with 4-bromoaniline and paraformaldehyde. We then prepared a PA-BZ porous organic polymer (POP) through Sonogashira coupling of AP-BZ with 1,3,6,8-tetraethynylpyrene (P-T) in the presence of Pd(PPh3)4. In situ Fourier transform infrared spectroscopy and differential scanning calorimetry revealed details of the thermal polymerization of the oxazine rings in the AP-BZ monomer and in the PA-BZ POP. Next, we prepared a microporous carbon/metal composite (PCMC) in three steps: Sonogashira coupling of AP-BZ with P-T in the presence of a zeolitic imidazolate framework (ZIF-67) as a directing hard template, affording a PA-BZ POP/ZIF-67 composite; etching in acetic acid; and pyrolysis of the resulting PA-BZ POP/metal composite at 500 °C. Powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller (BET) measurements revealed the properties of the as-prepared PCMC. The PCMC material exhibited outstanding thermal stability (Td10 = 660 °C and char yield = 75 wt%), a high BET surface area (1110 m2 g-1), high CO2 adsorption (5.40 mmol g-1 at 273 K), excellent capacitance (735 F g-1), and a capacitance retention of up to 95% after 2000 galvanostatic charge-discharge (GCD) cycles; these characteristics were excellent when compared with those of the corresponding microporous carbon (MPC) prepared through pyrolysis of the PA-BZ POP precursors with a ZIF-67 template at 500 °C.

Chiral core-shell microspheres β-CD-COF@SiO2 used for HPLC enantioseparation

Chiral covalent organic frameworks (CCOFs) have potential application in enantioseparation due to their advantages, such as large surface area, abundant chiral recognition sites and good chemical stability in organic solvents. However, the application of CCOFs in high performance liquid chromatography (HPLC) for enantioseparation has been rarely reported because of the shortcomings of CCOFs, such as light weight, irregular shape, and wide particle size distribution. In order to overcome the above shortcomings, a one-pot synthetic method was adopted to prepare a core-shell composite (β-CD-COF@SiO₂) via the growth of chiral β-CD COF on the surface of amino-functionalized SiO₂ microspheres. The as-prepared β-CD-COF@SiO₂ microspheres were used as a stationary phase for HPLC enantioseparation. The resolution ability of the β-CD-COF@SiO₂-packed column toward various chiral compounds was investigated using n-hexane/isopropanol as the mobile phase. The results show that the chiral β-CD-COF@SiO₂-packed column exhibited excellent chiral recognition ability for 24 pairs of chiral compounds with good reproducibility. These successful applications indicate that the preparation of the chiral COFs@SiO₂ core-shell microspheres as a novel stationary phase for enantioseparation has good application prospects in HPLC.

Controllable Synthesis of Hollow Microtubular Covalent Organic Frameworks as an Enzyme-Immobilized Platform for Enhancing Catalytic Activity

Despite great achievement that has been made in the synthesis of covalent organic frameworks (COFs), precise construction of COFs with well-defined nano/microstructures poses a rigorous challenge. Herein, we introduce a simple template-free strategy for controllable synthesis of hollow microtubular COFs. The obtained COFs show a spontaneous morphology transformation from a microfiber to a hollow microtubular structure when the concentrations of catalytic acid are regulated elaborately. Furthermore, the as-prepared COFs exhibit high crystallinity, well-defined hollow tubular morphology, and high surface areas (∼2600 m2/g). Taking the advantages of the unique morphological structure, the hollow microtubular COFs can serve as an ideal host material for enzymes. The resultant biocomposites show high catalytic performance and can be successfully applied to rapid and high-efficiency proteolysis of proteins. This work blazes a trail for controllable synthesis of the hollow microtubular COFs through a template-free process and expands the application of COFs as a promising platform for enzyme immobilization.

High-Performance Supercapacitor Electrodes Prepared From Dispersions of Tetrabenzonaphthalene-Based Conjugated Microporous Polymers and Carbon Nanotubes

In this study, we prepared a series of conjugated microporous polymers (CMPs) through Sonogashira-Hagihara cross-couplings of a tetrabenzonaphthalene (TBN) monomer with pyrene (Py), tetraphenylethylene (TPE), and carbazole (Car) units and examined their chemical structures, thermal stabilities, morphologies, crystallinities, and porosities. TBN-TPE-CMP possessed a high surface area (1150 m2 g-1) and thermal stability (Td10 = 505 °C; char yield = 68 wt %) superior to those of TBN-Py-CMP and TBN-Car-CMP. To improve the conductivity of the TBN-CMP materials, we blended them with highly conductive single-walled carbon nanotubes (SWCNTs). Electrochemical measurements revealed that the TBN-Py-CMP/SWCNT nanocomposite had high capacitance (430 F g-1) at a current density of 0.5 A g-1 and outstanding capacitance retention (99.18%) over 2000 cycles; these characteristics were superior to those of the TBN-TPE-CMP/SWCNT and TBN-Car-CMP/SWCNT nanocomposites.

A novel electrochemical sensor based on TAPT-TFP-COF/COOH-MWCNT for simultaneous detection of dopamine and paracetamol

In this work, a covalent organic framework (COF) TAPT-TFP-COF containing a triazine ring was prepared by a typical Schiff base condensation reaction of 1,3,5-tris-(4-aminophenyl)triazine (TAPT) and 1,3,5-triformyl phloroglucinol (TFP). The TAPT-TFP-COF and carboxyl-functionalized multi-wall carbon nanotubes (COOH-MWCNTs) were drip-coated on glassy carbon electrode respectively to develop a novel and simple electrochemical sensor in order to simultaneously detect dopamine (DA) and paracetamol (PA). COOH-MWCNTs interconnected the TAPT-TFP-COF and acted as bridges between the COF particles, which had a good synergistic effect and accelerated electron transfer. Under optimal conditions, linear responses were obtained over the concentration range 1-190 μM for DA and PA with limits of detection (LOD) of 0.14 μM and 0.19 μM, respectively. Furthermore, the fabricated sensor possesses outstanding repeatability and high selectivity, and can be applied for the determination of DA and PA in dopamine injection and acetaminophen drugs with satisfactory recoveries.