Dual-Purpose 3D Pillared Metal-Organic Framework with Excellent Properties for Catalysis of Oxidative Desulfurization and Energy Storage in Asymmetric Supercapacitor

Superior Electrochemical Water Splitting and Energy-Storage Performances of In Situ Fabricated Charge-Separated Metal Organophosphonate Single Crystals

The design and exploration of advanced materials as a durable multifunctional electrocatalyst toward sustainable energy generation and storage development is the most perdurable challenge in the domain of renewable energy research. Herein, a facile in situ solvothermal approach has been adopted to prepare a methylviologen-regulated crystalline metal phosphonate compound, [C12H14N2][Ni(C11H11N2)(H2hedp)2]2•6H2O (NIT1), (H4hedp = 1-hydroxyethane 1,1-diphosphonic acid) and well characterized by several techniques. The as-prepared NIT1 displays excellent bifunctional electrocatalytic activity with dynamic stability toward oxygen evolution reaction (η10 = 288 mV) and hydrogen evolution reaction (η10 = 228 mV) in alkaline (1.0 M KOH) and acidic mediums (0.5 M H2SO4), respectively. Such a low overpotential and Tafel slope (68 mV/dec for OER; 56 mV/dec for HER) along with long-term durability up to 20 h of NIT1 make it superior to benchmark the electrocatalyst and various nonprecious metal-based catalysts under similar experimental condition. Further, the electrochemical supercapacitor measurements (in three-electrode system) reveal that the NIT1 electrode possesses much higher specific capacity of 187.6 C g-1 at a current density of 2 A g-1 (272 C g-1 at 5 mV s-1) with capacitance retention of 75.2% over 10,000 cycles at 14 A g-1 (Coulombic efficiency > 99%) in 6 M KOH electrolyte medium. Finally for a practical application, an asymmetric supercapacitor device (coin cell) is assembled by NIT1 material. The as-fabricated device delivers the maximum energy density of 39.4 Wh kg-1 at a power density of 450 W kg-1 and achieves a wide voltage window of 1.80 V. Notably, the device endures a remarkable cycle performance with cyclic retention of 92% (Coulombic efficiency > 99%) even after 14,000 charge/discharge cycles at 10 A g-1. Nevertheless, the extraordinary electrochemical activities toward OER and HER as well as the high-performance device fabrication for LED illumination of such a noble metal-free lower-dimensional charge-transfer compound are truly path breaking and would be promising for the development of advanced multifunctional materials.

Encapsulation of H4SiW12O40 into an Amide-Functionalized MOF: A Highly Efficient Nanocomposite Catalyst for Oxidative Desulfurization of Diesel Fuel

Production of hydrocarbon fuels containing sulfur in ultralow levels is in high demand and requires the development of novel catalytic systems for oxidative desulfurization (ODS). Herein, a new nanocomposite SiW12@ZSTU-10 catalyst containing H4SiW12O40 (SiW12) encapsulated into a zinc(II) 3D metal-organic framework (MOF) (ZSTU-10) was assembled and characterized. The intricate structure and porosity of ZSTU-10 permit efficient encapsulation of the catalytically active SiW12 cages. The impact of different experimental parameters on the ODS of model oil containing dibenzothiophene as a typical S-based contaminant was evaluated. The SiW12@ZSTU-10 catalyst exhibits remarkable activity with up to 99.8% sulfur removal in 30 min. Kinetic features, trapping tests, and mechanistic studies were also performed. Furthermore, the catalyst offered an outstanding thermal and chemical stability, without apparent leaching and decline in the activity after six cycles. Such an improved catalytic efficiency of SiW12@ZSTU-10 can be assigned to (i) size-matched occupation of the ZSTU-10 pores by SiW12-active species, (ii) prevention of polyoxometalate (POM) leaching from the MOF matrix, (iii) facilitation of the access of S-based substrates to the active sites of SiW12, and (iv) excellent stability and recyclability of the obtained nanocomposite. The preset work widens a family of promising nanocomposite catalysts for improving the desulfurization performance of hybrid POM-MOF catalytic systems.

Co-containing metal-organic framework for high-performance asymmetric supercapacitors with functionalized reduced graphene oxide

Nowadays, supercapacitors are the most coveted eco-friendly and sustainable next-generation energy storage devices. In this regard, developing supercapacitors with high energy density and power density has always been a challenge for researchers. Herein, we have exploited an electroactive Co-containing metal-organic framework (Co-MOF) using cheap and commercially available starting materials under refluxing conditions and explored its energy storage properties in three- and two-electrode methods. The Co-MOF exhibited a specific capacitance of 425 F g-1 at 2 A g-1, maintaining a capacitance of ∼78% over 2200 successive charge-discharge cycles in a three-electrode system. The two-electrode asymmetric supercapacitor (ASC) using Co-MOF as the working electrode and as-synthesized p-phenylenediamine (PPD)-functionalized reduced graphene oxide (PPD-rGO) as the counter electrode divulged a specific capacitance of 72.5 F g-1 at 2 A g-1 current density with ∼70% capacitive retention after 2200 successive charge-discharge cycles over a broad potential window of 0-1.6 V. Moreover, the ASC demonstrated a maximum power density of 11.9 kW kg-1 at 10 A g-1 and a maximum energy density of 25.8 W h kg-1 at 2 A g-1 current density. Owing to the stable electrochemical redox (Co2+/Co3+)-mediated pseudocapacitive behavior of the Co-MOF and the high surface area and electrical conductivity of in situ generated PPD-intercalated rGO, the fabricated ASC unveiled high-performance supercapacitive behaviors. To investigate the practical applicability of this material, solid-state (ASC) devices were fabricated by employing the Co-MOF as the positive electrode and PPD-rGO as the negative electrode in a KOH-based gel electrolyte, which could power a commercially available light-emitting diode bulb (∼1.8 V) for several seconds. Therefore, the elucidated high electrochemical energy storage performance of the prepared Co-MOF makes it a very promising electrode material for supercapacitors.

A sustainable management of polycyclic aromatic hydrocarbons to synthesize microporous organic polymers for adsorptive desulphurization of fuels

A sustainable management of carcinogenic polycyclic aromatic hydrocarbons (PAHs) to synthesize a series of high surface area (SABET of 563-1553 m2 g-1) microporous polymeric adsorbents is reported. The products with high yield (>90%) were obtained within only 30 min at a low temperature of 50 °C using a microwave-assisted approach with 400 W microwave power followed by 30 min of ageing by raising the temperature to 80 °C. The synthesized adsorbents are used for removing another category of carcinogenic pollutants i.e., polycyclic aromatic sulphur heterocycles (PASHs) from model and real fuels. Adsorptive desulphurization experiment in batch mode could reduce the sulphur from high concentrated model (100 ppm) and real (102 ppm) fuels to 8 ppm and 45 ppm respectively. Similarly, desulphurization of model and real fuels with ultralow sulphur concentrations of 10 and 9 ppm, respectively, reduced the final concentration of sulphur to 0.2 and 3 ppm, respectively. Adsorption isotherms, kinetics, and thermodynamic studies have been conducted using batch mode experiments. Adsorptive desulphurization using fixed bed column studies show the breakthrough capacities of 18.6 and 8.2 mgS g-1, for the same high concentrated model and real fuels, respectively. The breakthrough capacities of 1.1 and 0.6 mgS g-1 are estimated for the ultralow sulphur model and real fuels, respectively. The adsorption mechanism, based on the spectroscopic analysis (FTIR and XPS) demonstrates the role of π-π interactions between the adsorbate and adsorbent. The adsorptive desulphurization studies of model and real fuels from batch to fixed bed column mode would offer an in-depth understanding to demonstrate the lab-scale findings for industrial applications. Thus, the present sustainable strategy could manage two classes of carcinogenic petrochemical pollutants, PAHs and PASHs, simultaneously.

Pd-Coordinated Salinidol-Modified Mixed MOF: An Excellent Active Center for Efficient Nitroarenes Reduction and Selective Oxidation of Alcohols

Selective oxidation of active and inactive alcohol substrates and reduction of nitroarenes is a highly versatile conversion that remains a challenge in controlling functionality and adjustments in metal-organic frameworks (MOFs). On the other hand, it offers an attractive opportunity to expand their applications in designing the next generation of catalysts with improved performance. Herein, a novel mixed MOF consisting of supported 2-hydroxybenzamide (mixed MOF-salinidol) has been fabricated by post-synthetic modifications of mixed MOF. Subsequently, the prepared nanocomposites were modified to impart catalytic sites using palladium chloride ions mixed with MOF-salinidol/Pd (II). After successfully designing and structurally characterizing nanocomposites, we evaluated their activity in oxidizing primary and secondary alcohols using aerobic conditions with molecular oxygen and an air atmosphere. In addition, the stability of (mixed MOF-salinidol/Pd (II)) catalysts under catalytic conditions was also demonstrated by comparing the Fourier-transform infrared spectrum, scanning electron microscopy image, and ICP-OES method before and after catalysis. Based on the results, the active surface area of the synthesized nanocatalyst is large, which highlights its unique synergistic effect between post-synthetic modified MOF and Pd, and furthermore, the availability of catalytic sites from Pd, as demonstrated by outstanding catalytic activity.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Metal-Organic Frameworks as Electrocatalysts

Transition metal complexes are well-known homogeneous electrocatalysts. In this regard, metal-organic frameworks (MOFs) can be considered as an ensemble of transition metal complexes ordered in a periodic arrangement. In addition, MOFs have several additional positive structural features that make them suitable for electrocatalysis, including large surface area, high porosity, and high content of accessible transition metal with exchangeable coordination positions. The present review describes the current state in the use of MOFs as electrocatalysts, both as host of electroactive guests and their direct electrocatalytic activity, particularly in the case of bimetallic MOFs. The field of MOF-derived materials is purposely not covered, focusing on the direct use of MOFs or its composites as electrocatalysts. Special attention has been paid to present strategies to overcome their poor electrical conductivity and limited stability.

Metal-Organic Framework Materials for Electrochemical Supercapacitors

Exploring new materials with high stability and capacity is full of challenges in sustainable energy conversion and storage systems. Metal-organic frameworks (MOFs), as a new type of porous material, show the advantages of large specific surface area, high porosity, low density, and adjustable pore size, exhibiting a broad application prospect in the field of electrocatalytic reactions, batteries, particularly in the field of supercapacitors. This comprehensive review outlines the recent progress in synthetic methods and electrochemical performances of MOF materials, as well as their applications in supercapacitors. Additionally, the superiorities of MOFs-related materials are highlighted, while major challenges or opportunities for future research on them for electrochemical supercapacitors have been discussed and displayed, along with extensive experimental experiences.

HPW/PAM Catalyst for Oxidative Desulfurization-Synthesis, Characterization and Mechanism Study

In this work, polyacrylamide (PAM) was first used in the loading of heteropoly acids, and then the HPM/PAM-n catalyst was synthesized by simple reaction. The FTIR and SEM measurements showed that the HPM/PAM-n (n = 10,000, 20,000, 30,000) was successfully synthesized. In addition, the HPM/PAM-n effect on desulfurization was measured, which showed the optimal desulfurization efficiency. The optimal process condition for HPM/PAM-10000 desulfurization was optimized by a single-factor experiment. The optimal condition was as follows: The temperature was 60 °C, the amount of the catalyst was 0.2 g, the oxygen to sulfur ratio was 16, and the reaction time is 100 min. The catalyst was suitable for recycled use, and the desulfurization efficiency was high after 10 times. In the end, the oxidative desulfurization mechanism was put forward.

Porous carbon nanoarchitectonics for the environment: detection and adsorption

As a post-nanotechnology concept, nanoarchitectonics has emerged from the 20th century to the 21st century. This review summarizes the recent progress in the field of metal-free porous carbon nanoarchitectonics.

Advances in Oxidative Desulfurization of Fuel Oils over MOFs-Based Heterogeneous Catalysts

Catalytic oxidative desulfurization (ODS) of fuel oils is considered one of the most promising non-hydrodesulfurization technologies due to the advantages of mild reaction conditions, low cost and easy removal of aromatic sulfur compounds. Based on this reason, the preparation of highly efficient ODS catalysts has been a hot research topic in this field. Recently, metal-organic frameworks (MOFs) have attracted extensive attention due to the advantages involving abundant metal centers, high surface area, rich porosity and varied pore structures. For this, the synthesis and catalytic performance of the ODS catalysts based on MOFs materials have been widely studied. Until now, many research achievements have been obtained along this direction. In this article, we will review the advances in oxidative desulfurization of fuel oils over MOFs-based heterogeneous catalysts. The catalytic ODS performance over various types of catalysts is compared and discussed. The perspectives for future work are proposed in this field.

Tailoring Electronic Structure and Size of Ultrastable Metalated Metal-Organic Frameworks with Enhanced Electroconductivity for High-Performance Supercapacitors

Utilization of metal-organic frameworks (MOFs) as electrodes for energy storage/conversion is challenging because of the low chemical stability and poor electrical conductivity of MOFs in electrolytes. A nanoscale MOF, Co_0.24 Ni_0.76 -bpa-200, possessing ultrahigh stability with uncommon semiconductor behavior (σ=4.2×10^-3  S m^-1 ) was fabricated. The MOF comprises a robust hydrophobic paddlewheel and an optimized Co/Ni ratio, with consequent control over MOF size and the degree of conjugation of the coligand. A DFT study revealed that appropriate Ni²⁺ doping reduces the activation energy of the system, thus providing a higher carrier concentration, and the strongly delocalized N-donor ligand notably increases the metal-ligand orbital overlap to achieve efficient charge migration, leading to continuous through-bond (-CoNi-N-CoNi-)_∞ conduction paths. These structural features endow the MOF with a good cycling stability of 86.5 % (10 000 cycles) and a high specific capacitance of 1927.14 F g^-1 among pristine MOF-based electrodes.

How neutral nitrogen-containing compounds are oxidized in oxidative-denitrogenation of liquid fuel with TiO2@carbon

Oxidative-denitrogenation (ODN) of indole (IND) and methyl-substituted INDs (methyl-INDs), representative neutral nitrogen-containing compounds (NCCs), was carried out with TiO₂@C and H₂O₂ as heterogeneous catalyst and oxidant, respectively, under ultrasound irradiation. The oxidation of INDs progressed through radical formation, as evidenced by electron spin resonance and radical scavenger experiments. The oxidized position of INDs in the ODN process was checked via characterization of the obtained products. It was observed that the oxidation finally occurred on the carbon rather than on the nitrogen atom of INDs, unlike the oxidation of basic NCCs (e.g., oxidation on the nitrogen atom, as respective N-oxides were formed) and sulfur-containing compounds. To understand the relative reactivity and oxidation position, electron density (ED) on the nitrogen atom of the studied INDs and relative stability of representative intermediates/products were calculated. It could be confirmed that ED on the nitrogen atom of the INDs is very important in the oxidation of INDs since the ODN reactivity of INDs was enhanced with increasing ED on the nitrogen atom of the investigated INDs. Moreover, theoretical analyses of the relative stability of substrate and intermediates/products (especially for IND) can explain the route for the observed final products in ODN. In other words, oxygen on the nitrogen atom, obtained via the first step of oxidation (electrophilic addition of an active oxygen atom on nitrogen), moves to the nearby carbon atom, because of the relative stability of the intermediates and products.

Preparation of tungstophosphoric acid/cerium-doped NH2-UiO-66 Z-scheme photocatalyst: a new candidate for green photo-oxidation of dibenzothiophene and quinoline using molecular oxygen as the oxidant

The goal of this study was to introduce an effective visible-light induced photocatalytic system with a good ability for photocatalytic oxidative desulfurization (PODS) and denitrogenation (PODN) using molecular oxygen (O₂) as an oxidant.

Insights to the oxidative desulfurization process of fossil fuels over organic and inorganic heterogeneous catalysts: advantages and issues

Strict environmental laws have been put in place around the world to reduce the amount of sulfur in the fuel to reduce the emissions of harmful gases from fuel combustion and improve air quality. Therefore, extensive researches have been undertaken to devise effective processes or to improve the desulfurization processes. Among the desulfurization processes, the oxidative desulfurization (ODS) process is a promising method to achieve very low and near-zero sulfur content of the fuel. In this process, sulfur compounds are converted to the corresponding sulfone by a catalyst and in the presence of an oxidant. The obtained compounds by polar solvents or adsorbents are removed from the fuel. In recent decades, extensive studies have been carried out on the catalysts used in the oxidative desulfurization process. In this review, a comprehensive survey has been performed on heterogeneous catalysts used in the oxidative desulfurization process. According to the reported researches, the heterogeneous catalysts used can be divided into five groups: ionic liquids, carbon materials, polyoxometalates, transition metal oxides stabilized on porous solid substrates, and metal-organic frameworks. The proposed mechanisms with different catalysts have also been studied in this work.

Colossal Dielectric Responses from the Wide Band Gap 2D-Semiconducting Amine Templated Hybrid Framework Materials

Two unprecedented organic amine templated silver organophosphonate hybrid solids have been synthesized hydrothermally by varying the molar ratio of the reactants. Both of the compounds consist of novel tetra- and penta-nuclear silver phosphonate basic building units. The dielectric constants are extremely large due to the charge separation of anionic metal phosphonate frameworks and cationic templated piperazine moieties in the compounds, as found for the first time in a hybrid organophosphate family. The conductivity and UV-visible absorption studies provide strong evidence about the semiconducting nature of the present compounds.

A High-Capacity Negative Electrode for Asymmetric Supercapacitors Based on a PMo12 Coordination Polymer with Novel Water-Assisted Proton Channels

The development of a negative electrode for supercapacitors is a critical challenge for the next-generation of energy-storage devices. Herein, two new electrodes formed by the coordination polymers [Ni(itmb)₄ (HPMo₁₂ O₄₀ )]·2H₂ O (1) and [Zn(itmb)₃ (H₂ O)(HPMo₁₂ O₄₀ )]·4H₂ O (2) (itmb = 1-(imidazo-1-ly)-4-(1,2,4-triazol-1-ylmethyl)benzene), synthesized by a simple hydrothermal method, are described. Compounds 1 and 2 show high capacitances of 477.9 and 890.2 F g^-1 , respectively. An asymmetric supercapacitor device assembled using 2 which has novel water-assisted proton channels as negative electrode and active carbon as positive electrode shows ultrahigh energy density and power density of 23.4 W h kg^-1 and 3864.4 W kg^-1 , respectively. Moreover, the ability to feed a red light emitting diode (LED) also demonstrates the feasibility for practical use. The results allow a better elucidation of the storage mechanism in polyoxometalate-based coordination polymers and provide a promising direction for exploring novel negative materials for new-generation high-performance supercapacitors.

Enhanced electrochemical oxygen and hydrogen evolution reactions using an NU-1000@NiMn-LDHS composite electrode in alkaline electrolyte

A well-designed NU-1000@NiMn-LDHS (NU@LDHS) composite can offer efficient electrocatalytic performance with ultralow HER and OER overpotentials of 93 and 129 mV, respectively, at a current density of 10 mA cm⁻² in 2 M KOH.

An advanced composite with ultrafast photocatalytic performance for the degradation of antibiotics by natural sunlight without oxidizing the source over TMU-5@Ni–Ti LDH: mechanistic insight and toxicity assessment

Pharmaceuticals are considered as emerging organic contaminants that have become a serious environmental problem, which endanger human health and environmental bio-diversity.

A Luminescent Amine-Functionalized Metal-Organic Framework Conjugated with Folic Acid as a Targeted Biocompatible pH-Responsive Nanocarrier for Apoptosis Induction in Breast Cancer Cells

Folic acid amine-functionalized metal-organic framework (FOLA@NH₂-Eu:TMU-62) with luminescent properties loaded with 5-fluorouracil (5-Fu), as an anticancer medication, was used to construct a new cancer targeted drug delivery system in the present study. The 5-Fu release from this targeted carrier along with MTT assay and trypan blue dye exclusion test results also exhibited pH-controlled characteristics of the given carrier in acidic environments, which is very suitable for targeting solid tumors. Then, the inhibitory action of 5-Fu-loaded FOLA@NH₂-Eu:TMU-62 for Michigan Cancer Foundation-7 (MCF7) cell migration was explored according to scratch wound healing assays. Based on the results, the FOLA@NH₂-Eu:TMU-62 carrier was not toxic for MCF-10A normal cells, but it was significantly toxic for MCF-7 breast cancer ones, revealing that the FOLA@NH₂-Eu:TMU-62 carrier could be utilized in accurate cancer treatments through apoptotic pathways with higher reactive oxygen species compared with 5-Fu alone. This cancer-targeted design of FOLA@NH₂-Eu:TMU-62 could thus pave the way for synergistic effects of targeting as well as organized release capabilities.