1
|
Jia S, Liao K, Zhou M, Xin X, Luo Y, Cheng YJ, Liu R, Yan X, Lee J, Papović S, Zheng K, Świerczek K. Prussian White/Reduced Graphene Oxide Composite as Cathode Material to Enhance the Electrochemical Performance of Sodium-Ion Battery. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:20485-20494. [PMID: 39302021 DOI: 10.1021/acs.langmuir.4c01973] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/22/2024]
Abstract
Prussian white (PW) is considered a promising cathode material for sodium-ion batteries. However, challenges, such as lattice defects and poor conductivity limit its application. Herein, the composite materials of manganese-iron based Prussian white and reduced graphene oxide (PW/rGO) were synthesized via a one-step in situ synthesis method with sodium citrate, which was employed both as a chelating agent to control the reaction rate during the coprecipitation process of PW synthesis and as a reducing agent for GO. The low precipitation speed helps minimize lattice defects, while rGO enhances electrical conductivity. Furthermore, the one-step in situ synthesis method is simpler and more efficient than the traditional synthesis method. Compared with pure PW, the PW/rGO composites exhibit significantly improved electrochemical properties. Cycling performance tests indicated that the PW/rGO-10 sample exhibited the highest initial discharge capacity and the best cyclic stability. The PW/rGO-10 has an initial discharge capacity of 128 mAh g-1 at 0.1 C (1 C = 170 mA g-1), and retains 49.53% capacity retention after 100 cycles, while the PW only delivers 112 mAh g-1 with a capacity retention of 17.79% after 100 cycles. Moreover, PW/rGO-10 also shows better rate performance and higher sodium ion diffusion coefficient (DNa+) than the PW sample. Therefore, the incorporation of rGO not only enhances the electrical conductivity but also promotes the rapid diffusion of sodium ions, effectively improving the electrochemical performance of the composite as a cathode material for sodium-ion batteries.
Collapse
Affiliation(s)
- Si Jia
- School of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, PR China
| | - Kaisi Liao
- School of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, PR China
| | - Mingjiong Zhou
- School of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, PR China
| | - Xing Xin
- School of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, PR China
| | - Yunjie Luo
- School of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, PR China
| | - Ya-Jun Cheng
- College of Renewable Energy, Hohai University, Changzhou 213022, PR China
| | - Rui Liu
- Ningbo Ronbay New Energy Technology Co., Ltd., Ningbo 315400, PR China
| | - Xufeng Yan
- Ningbo Ronbay New Energy Technology Co., Ltd., Ningbo 315400, PR China
| | - Jonghee Lee
- Ningbo Ronbay New Energy Technology Co., Ltd., Ningbo 315400, PR China
| | - Snežana Papović
- Faculty of Sciences, University of Novi Sad, Novi Sad 21000, Serbia
| | - Kun Zheng
- Faculty of Energy and Fuels, AGH University of Krakow, Al. A. Mickiewicza 30, Krakow 30-059, Poland
| | - Konrad Świerczek
- Faculty of Energy and Fuels, AGH University of Krakow, Al. A. Mickiewicza 30, Krakow 30-059, Poland
| |
Collapse
|
2
|
Anil Kumar Y, Sana SS, Ramachandran T, Assiri MA, Srinivasa Rao S, Kim SC. From lab to field: Prussian blue frameworks as sustainable cathode materials. Dalton Trans 2024; 53:10770-10804. [PMID: 38859722 DOI: 10.1039/d4dt00905c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/12/2024]
Abstract
Prussian blue and Prussian blue analogues have attracted increasing attention as versatile framework materials with a wide range of applications in catalysis, energy conversion and storage, and biomedical and environmental fields. In terms of energy storage and conversion, Prussian blue-based materials have emerged as suitable candidates of growing interest for the fabrication of batteries and supercapacitors. Their outstanding electrochemical features such as fast charge-discharge rates, high capacity and prolonged cycling life make them favorable for energy storage application. Furthermore, Prussian blue and its analogues as rechargeable battery anodes can advance significantly by the precise control of their structure, morphology, and composition at the nanoscale. Their tunable structural and electronic properties enable the detection of many types of analytes with high sensitivity and specificity, and thus, they are ideal materials for the development of sensors for environmental detection, disease trend monitoring, and industrial safety. Additionally, Prussian blue-based catalysts display excellent photocatalytic performance for the degradation of pollutants and generation of hydrogen. Specifically, their excellent light capturing and charge separation capabilities make them stand out in photocatalytic processes, providing a sustainable option for environmental remediation and renewable energy production. Besides, Prussian blue coatings have been studied particularly for corrosion protection, forming stable and protective layers on metal surfaces, which extend the lifespan of infrastructural materials in harsh environments. Prussian blue and its analogues are highly valuable materials in healthcare fields such as imaging, drug delivery and theranostics because they are biocompatible and their further functionalization is possible. Overall, this review demonstrates that Prussian blue and related framework materials are versatile and capable of addressing many technical challenges in various fields ranging from power generation to healthcare and environmental management.
Collapse
Affiliation(s)
- Yedluri Anil Kumar
- Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai 602105, Tamil Nadu, India
| | - Siva Sankar Sana
- School of Chemical Engineering, Yeungnam University, Gyeongsan, 38541, Republic of Korea
| | - Tholkappiyan Ramachandran
- Department of Physics, Khalifa University of Science and Technology, Abu Dhabi, P. O. Box 127788, United Arab Emirates
- Department of Physics, PSG Institute of Technology and Applied Research, Coimbatore, 641 062, India
| | - Mohammed A Assiri
- Department of Chemistry, College of Science, King Khalid University, Abha, 61413, Saudi Arabia
| | - Sunkara Srinivasa Rao
- Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Bowrampet, Hyderabad, 500 043, Telangana, India
| | - Seong Cheol Kim
- School of Chemical Engineering, Yeungnam University, Gyeongsan, 38541, Republic of Korea
| |
Collapse
|
3
|
Lei YJ, Zhao L, Lai WH, Huang Z, Sun B, Jaumaux P, Sun K, Wang YX, Wang G. Electrochemical coupling in subnanometer pores/channels for rechargeable batteries. Chem Soc Rev 2024; 53:3829-3895. [PMID: 38436202 DOI: 10.1039/d3cs01043k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/05/2024]
Abstract
Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.
Collapse
Affiliation(s)
- Yao-Jie Lei
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Sydney, NSW 2007, Australia.
| | - Lingfei Zhao
- Institute for Superconducting & Electronic Materials, Australian Institute of Innovative Materials, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW 2500, Australia
| | - Wei-Hong Lai
- Institute for Superconducting & Electronic Materials, Australian Institute of Innovative Materials, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW 2500, Australia
| | - Zefu Huang
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Sydney, NSW 2007, Australia.
| | - Bing Sun
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Sydney, NSW 2007, Australia.
| | - Pauline Jaumaux
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Sydney, NSW 2007, Australia.
| | - Kening Sun
- School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing 10081, P. R. China.
| | - Yun-Xiao Wang
- Institute of Energy Materials Science (IEMS), University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai, 200093, P. R. China.
| | - Guoxiu Wang
- Centre for Clean Energy Technology, School of Mathematical and Physical Sciences, Faculty of Science, University of Technology Sydney, Sydney, NSW 2007, Australia.
| |
Collapse
|
4
|
Peng X, Zhang H, Yang C, Lui Z, Lin Z, Lei Y, Zhang S, Li S, Zhang S. Promoting threshold voltage of P2-Na 0.67Ni 0.33Mn 0.67O 2 with Cu 2+ cation doping toward high-stability cathode for sodium-ion battery. J Colloid Interface Sci 2024; 659:422-431. [PMID: 38183808 DOI: 10.1016/j.jcis.2023.12.170] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/10/2023] [Revised: 12/21/2023] [Accepted: 12/28/2023] [Indexed: 01/08/2024]
Abstract
P2-type Na0.67Ni0.33Mn0.67O2 has attracted considerable attraction as a cathode material for sodium-ion batteries owing to its high operating voltage and theoretical specific capacity. However, when the charging voltage is higher than 4.2 V, the Na0.67Ni0.33Mn0.67O2 cathode undergoes a detrimental irreversible phase transition of P2-O2, leading to a drastic decrease in specific capacity. To address this challenge, we implemented a Cu-doping strategy (Na0.67Ni0.23Cu0.1Mn0.67O2) in this work to stabilize the structure of the transition metal layer. The stabilization strategy involved reinforcing the transition metal-oxygen (TMO) bonds, particularly the MnO bond and inhibiting interlayer slip during deep desodiation. As a result, the irreversible phase transition voltage is delayed, with the threshold voltage increasing from 4.2 to 4.4 V. Ex-situ X-ray diffraction measurements revealed that the Na0.67Ni0.23Cu0.1Mn0.67O2 cathode maintains the P2 phase within the voltage window of 2.5-4.3 V, whereas the P2-Na0.67Ni0.33Mn0.67O2 cathode transforms entirely into O2-type Na0.67Ni0.33Mn0.67O2 when the voltage exceeds 4.3 V. Furthermore, absolute P2-O2 phase transition of the Na0.67Ni0.23Cu0.1Mn0.67O2 cathode occurred at 4.6 V, indicating that Cu2+ doping enhances the stability of the layer structure and increases the threshold voltage. The resulting Na0.67Ni0.23Cu0.1Mn0.67O2 cathode exhibited superior electrochemical properties, demonstrating an initial reversible specific capacity of 89.1 mAh/g at a rate of 2C (360 mA g-1) and retaining more than 78 % of its capacity after 500 cycles.
Collapse
Affiliation(s)
- Xiang Peng
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| | - Haiyan Zhang
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China.
| | - Changsheng Yang
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| | - Zhenjiang Lui
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| | - Zihua Lin
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| | - Ying Lei
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| | - Shangshang Zhang
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| | - Shengkai Li
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| | - Shuqi Zhang
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China
| |
Collapse
|
5
|
Shu W, Li J, Zhang G, Meng J, Wang X, Mai L. Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries. NANO-MICRO LETTERS 2024; 16:128. [PMID: 38381213 PMCID: PMC10881954 DOI: 10.1007/s40820-024-01355-y] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/23/2023] [Accepted: 01/03/2024] [Indexed: 02/22/2024]
Abstract
Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.
Collapse
Affiliation(s)
- Wenli Shu
- Department of Physical Science and Technology, School of Science, Wuhan University of Technology, Wuhan, 430070, People's Republic of China
- School of Materials Science and Engineering, State Key Laboratory of Advanced Technology for Materials Synthesis, Wuhan University of Technology, Wuhan, 430070, People's Republic of China
- Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya, 572000, People's Republic of China
| | - Junxian Li
- School of Materials Science and Engineering, State Key Laboratory of Advanced Technology for Materials Synthesis, Wuhan University of Technology, Wuhan, 430070, People's Republic of China
- Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya, 572000, People's Republic of China
| | - Guangwan Zhang
- School of Materials Science and Engineering, State Key Laboratory of Advanced Technology for Materials Synthesis, Wuhan University of Technology, Wuhan, 430070, People's Republic of China
- Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya, 572000, People's Republic of China
| | - Jiashen Meng
- School of Materials Science and Engineering, State Key Laboratory of Advanced Technology for Materials Synthesis, Wuhan University of Technology, Wuhan, 430070, People's Republic of China
| | - Xuanpeng Wang
- Department of Physical Science and Technology, School of Science, Wuhan University of Technology, Wuhan, 430070, People's Republic of China.
- Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya, 572000, People's Republic of China.
- Hubei Longzhong Laboratory, Wuhan University of Technology, Xiangyang Demonstration Zone, Xiangyang, 441000, People's Republic of China.
| | - Liqiang Mai
- School of Materials Science and Engineering, State Key Laboratory of Advanced Technology for Materials Synthesis, Wuhan University of Technology, Wuhan, 430070, People's Republic of China.
- Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya, 572000, People's Republic of China.
- Hubei Longzhong Laboratory, Wuhan University of Technology, Xiangyang Demonstration Zone, Xiangyang, 441000, People's Republic of China.
| |
Collapse
|
6
|
Xu S, Dong H, Yang D, Wu C, Yao Y, Rui X, Chou S, Yu Y. Promising Cathode Materials for Sodium-Ion Batteries from Lab to Application. ACS CENTRAL SCIENCE 2023; 9:2012-2035. [PMID: 38033793 PMCID: PMC10683485 DOI: 10.1021/acscentsci.3c01022] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/15/2023] [Revised: 10/07/2023] [Accepted: 10/09/2023] [Indexed: 12/02/2023]
Abstract
Sodium-ion batteries (SIBs) are seen as an emerging force for future large-scale energy storage due to their cost-effective nature and high safety. Compared with lithium-ion batteries (LIBs), the energy density of SIBs is insufficient at present. Thus, the development of high-energy SIBs for realizing large-scale energy storage is extremely vital. The key factor determining the energy density in SIBs is the selection of cathodic materials, and the mainstream cathodic materials nowadays include transition metal oxides, polyanionic compounds, and Prussian blue analogs (PBAs). The cathodic materials would greatly improve after targeted modulations that eliminate their shortcomings and step from the laboratory to practical applications. Before that, some remaining challenges in the application of cathode materials for large-scale energy storage SIBs need to be addressed, which are summarized at the end of this Outlook.
Collapse
Affiliation(s)
- Shitan Xu
- School
of Materials and Energy, Guangdong University
of Technology, Guangzhou, Guangdong 510006, China
| | - Huanhuan Dong
- Institute
for Carbon Neutralization, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang 325035, China
- Wenzhou
Key Laboratory of Sodium-Ion Batteries, Wenzhou University Technology Innovation Institute for Carbon Neutralization, Wenzhou, Zhejiang 325035, China
| | - Dan Yang
- School
of Materials and Energy, Guangdong University
of Technology, Guangzhou, Guangdong 510006, China
| | - Chun Wu
- Institute
for Carbon Neutralization, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang 325035, China
- Wenzhou
Key Laboratory of Sodium-Ion Batteries, Wenzhou University Technology Innovation Institute for Carbon Neutralization, Wenzhou, Zhejiang 325035, China
| | - Yu Yao
- Hefei
National Research Center for Physical Sciences at the Microscale,
Department of Materials Science and Engineering, CAS Key Laboratory
of Materials for Energy Conversion, University
of Science and Technology of China, Hefei, Anhui 230026, China
| | - Xianhong Rui
- School
of Materials and Energy, Guangdong University
of Technology, Guangzhou, Guangdong 510006, China
| | - Shulei Chou
- Institute
for Carbon Neutralization, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang 325035, China
- Wenzhou
Key Laboratory of Sodium-Ion Batteries, Wenzhou University Technology Innovation Institute for Carbon Neutralization, Wenzhou, Zhejiang 325035, China
| | - Yan Yu
- Hefei
National Research Center for Physical Sciences at the Microscale,
Department of Materials Science and Engineering, CAS Key Laboratory
of Materials for Energy Conversion, University
of Science and Technology of China, Hefei, Anhui 230026, China
| |
Collapse
|
7
|
Zhou A, Guo C, Jiang J, Wang D, Wang X, Ali S, Li J, Xia W, Fu M, Sun W. The Pillar Effect of Large-Size Alkaline Ions on the Electrochemical Stability of Sodium Manganese Hexacyanoferrate for Sodium-Ion Batteries. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023:e2304887. [PMID: 37632313 DOI: 10.1002/smll.202304887] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/19/2023] [Revised: 08/06/2023] [Indexed: 08/27/2023]
Abstract
Sodium manganese hexacyanoferrate (NaMnHCF) is an attractive candidate as a cathode material for sodium-ion batteries due to its low cost and high energy density. However, its practical application is hindered by poor electrochemical stability caused by the Jahn-Teller effect of Mn and the unstable structure of NaMnHCF. Here, this paper aims to address this issue by introducing highly stable AMnHCF (where A = K, Rb, or Cs) through a facile method to composite with NaMnHCF. The findings reveal that all AMnHCFs have a "pillar effect" on the crystal structure of NaMnHCF. It is observed that the degree of pillar effect varies depending on the specific AMnHCF used. The less electrochemically inactive the alkaline ion is and the greater the degree of compositing with NaMnHCF, the more dramatic the pillar effect. KMnHCF shows limited pillar effect due to its rough composition with NaMnHCF and the loss of K+ upon (de)intercalation. RbMnHCF has lower electrochemical activity and can be better composited with NaMnHCF. On the other hand, CsMnHCF exhibits the strongest pillar effect due to the inactivation of Cs+ and the excellent coherent structure formed by CsMnHCF and NaMnHCF. This research provides a new perspective on stabilizing NaMnHCF with other alkaline elements.
Collapse
Affiliation(s)
- Aijun Zhou
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 611731, China
- Yangtze Delta Region Institute Huzhou, University of Electronic Science and Technology of China, Huzhou, 313001, China
| | - Can Guo
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 611731, China
- Yangtze Delta Region Institute Huzhou, University of Electronic Science and Technology of China, Huzhou, 313001, China
| | - Jicheng Jiang
- Yangtze Delta Region Institute Huzhou, University of Electronic Science and Technology of China, Huzhou, 313001, China
| | - Donghuang Wang
- Yangtze Delta Region Institute Huzhou, University of Electronic Science and Technology of China, Huzhou, 313001, China
| | - Xin Wang
- Yangtze Delta Region Institute Huzhou, University of Electronic Science and Technology of China, Huzhou, 313001, China
| | - Shamshad Ali
- Yangtze Delta Region Institute Huzhou, University of Electronic Science and Technology of China, Huzhou, 313001, China
| | - Jingze Li
- School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu, 611731, China
- Yangtze Delta Region Institute Huzhou, University of Electronic Science and Technology of China, Huzhou, 313001, China
| | - Weiwei Xia
- School of Materials and Engineering, Northwestern Polytechnical University, 127 West Youyi Road, Beilin District, Xi'an, Shaanxi, 710072, P. R. China
| | - Maosen Fu
- School of Materials and Engineering, Northwestern Polytechnical University, 127 West Youyi Road, Beilin District, Xi'an, Shaanxi, 710072, P. R. China
| | - Wenwu Sun
- Thermo Fisher Scientific Co., Ltd., Shanghai China, Building A, China Core Technology Park, 2517 Jinke Road, Pudong New Area, Shanghai, 201203, China
| |
Collapse
|
8
|
Xu C, Ma Y, Zhao J, Zhang P, Chen Z, Yang C, Liu H, Hu YS. Surface Engineering Stabilizes Rhombohedral Sodium Manganese Hexacyanoferrates for High-Energy Na-Ion Batteries. Angew Chem Int Ed Engl 2023; 62:e202217761. [PMID: 36719001 DOI: 10.1002/anie.202217761] [Citation(s) in RCA: 27] [Impact Index Per Article: 13.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2022] [Revised: 01/27/2023] [Accepted: 01/31/2023] [Indexed: 02/01/2023]
Abstract
The rhombohedral sodium manganese hexacyanoferrate (MnHCF) only containing cheap Fe and Mn metals was regarded as a scalable, low-cost, and high-energy cathode material for Na-ion batteries. However, the unexpected Jahn-teller effect and significant phase transformation would cause Mn dissolution and anisotropic volume change, thus leading to capacity loss and structural instability. Here we report a simple room-temperature route to construct a magical Cox B skin on the surface of MnHCF. Benefited from the complete coverage and the buffer effect of Cox B layer, the modified MnHCF cathode exhibits suppressed Mn dissolution and reduced intergranular cracks inside particles, thereby demonstrating thousands-cycle level cycling lifespan. By comparing two key parameters in the real energy world, i.e., cost per kilowatt-hours and cost per cycle-life, our developed Cox B coated MnHCF cathode demonstrates more competitive application potential than the benchmarking LiFePO4 for Li-ion batteries.
Collapse
Affiliation(s)
- Chunliu Xu
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, China.,Key Laboratory for Renewable Energy, Beijing Key Laboratory for New Energy Materials and Devices, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
| | - Yongzhi Ma
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, China
| | - Junmei Zhao
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, China
| | - Peng Zhang
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, China
| | - Zhao Chen
- Key Laboratory for Renewable Energy, Beijing Key Laboratory for New Energy Materials and Devices, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
| | - Chao Yang
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, China
| | - Huizhou Liu
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, China
| | - Yong-Sheng Hu
- Key Laboratory for Renewable Energy, Beijing Key Laboratory for New Energy Materials and Devices, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing, 100190, China
| |
Collapse
|
9
|
Xie B, Sun B, Gao T, Ma Y, Yin G, Zuo P. Recent progress of Prussian blue analogues as cathode materials for nonaqueous sodium-ion batteries. Coord Chem Rev 2022. [DOI: 10.1016/j.ccr.2022.214478] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
10
|
Zhang F, Zhang W, Wexler D, Guo Z. Recent Progress and Future Advances on Aqueous Monovalent-Ion Batteries towards Safe and High-Power Energy Storage. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2107965. [PMID: 35338665 DOI: 10.1002/adma.202107965] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/05/2021] [Revised: 02/25/2022] [Indexed: 05/24/2023]
Abstract
Aqueous monovalent-ion batteries have been rapidly developed recently as promising energy storage devices in large-scale energy storage systems owing to their fast charging capability and high power densities. In recent years, Prussian blue analogues, polyanion-type compounds, and layered oxides have been widely developed as cathodes for aqueous monovalent-ion batteries because of their low cost and high theoretical capacity. Furthermore, many design strategies have been proposed to expand their electrochemical stability window by reducing the amount of free water molecules and introducing an electrolyte addictive. This review highlights the advantages and drawbacks of cathode and anode materials, and summarizes the correlations between the various strategies and the electrochemical performance in terms of structural engineering, morphology control, elemental compositions, and interfacial design. Finally, this review can offer rational principles and potential future directions in the design of aqueous monovalent-ion batteries.
Collapse
Affiliation(s)
- Fangli Zhang
- Institute for Superconducting & Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, innovation Campus, North Wollongong, New South Wales, 2500, Australia
| | - Wenchao Zhang
- School of Metallurgy and Environment, Central South University, Changsha, 410083, China
- Chinese National Engineering Research Centre for Control & Treatment of Heavy Metal Pollution, Changsha, 410083, China
| | - David Wexler
- Faculty of Engineering and Information Science, University of Wollongong, Northfields Ave, Wollongong, New South Wales, 2522, Australia
| | - Zaiping Guo
- School of Chemical Engineering & Advanced Materials, The University of Adelaide, Adelaide, South Australia, 5005, Australia
| |
Collapse
|
11
|
Peng J, Zhang W, Liu Q, Wang J, Chou S, Liu H, Dou S. Prussian Blue Analogues for Sodium-Ion Batteries: Past, Present, and Future. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2108384. [PMID: 34918850 DOI: 10.1002/adma.202108384] [Citation(s) in RCA: 193] [Impact Index Per Article: 64.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/19/2021] [Revised: 11/24/2021] [Indexed: 06/14/2023]
Abstract
Prussian blue analogues (PBAs) have attracted wide attention for their application in the energy storage and conversion field due to their low cost, facile synthesis, and appreciable electrochemical performance. At the present stage, most research on PBAs is focused on their material-level optimization, whereas their properties in practical battery systems are seldom considered. This review aims to first provide an overview of the history and parameters of PBA materials and analyze the fundamental principles toward rational design of PBAs, and then evaluate the prospects and challenges for PBAs for practical sodium-ion batteries, hoping to bridge the gap between laboratory research and commercial reality.
Collapse
Affiliation(s)
- Jian Peng
- Institute of Carbon Neutralization, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang, 325035, China
- Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW, 2522, Australia
| | - Wang Zhang
- Institute of Carbon Neutralization, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang, 325035, China
- Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW, 2522, Australia
| | - Qiannan Liu
- Institute of Carbon Neutralization, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang, 325035, China
| | - Jiazhao Wang
- Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW, 2522, Australia
| | - Shulei Chou
- Institute of Carbon Neutralization, College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang, 325035, China
| | - Huakun Liu
- Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW, 2522, Australia
| | - Shixue Dou
- Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, Innovation Campus, Squires Way, North Wollongong, NSW, 2522, Australia
| |
Collapse
|
12
|
Shen X, Han M, Li X, Zhang P, Yang C, Liu H, Hu YS, Zhao J. Regulated Synthesis of α-NaVOPO 4 with an Enhanced Conductive Network as a High-Performance Cathode for Aqueous Na-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2022; 14:6841-6851. [PMID: 35100501 DOI: 10.1021/acsami.1c22655] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
The low-cost and profusion of sodium reserves make Na-ion batteries (NIBs) a potential candidate to lithium-ion batteries for grid-scale energy storage applications. NaVOPO4 has been recognized as one of the most promising cathodes for high-energy NIBs, owing to their high theoretical capacity and energy density. However, their further application is hindered by the multiphase transition and conductivity confinement. Herein, we proposed a feasible, one-step hydrothermal synthesis to regulate the synthesis of α-NaVOPO4 with controlled morphologies. The electrochemical properties of the NaVOPO4 electrode can be significantly enhanced taking Ketjen black (KB) as the optimized conductive carbon. Besides, combining with the nanocrystallization and construction of the conductive framework via high-energy ball milling, taking KB as the conductive carbon, the as-prepared NaVOPO4/5%KB exhibits superior Na-storage performance (140.2 mA h g-1 at 0.1 C and a capacity retention of 84.8% over 1000 cycles at 10 C) to the original NaVOPO4 (128.5 mA h g-1 at 0.1 C and a capacity retention of 83.1% over 1000 cycles at 10 C). Moreover, the aqueous full cell with NaTi2(PO4)3 as the anode delivers a capacity of 114.7 mA h g-1 at 0.2 C (141 W h kg-1 energy density) and 80.6% capacity retention over 300 cycles at 5 C. The excellent electrochemical performance can be attributed to the nanosized structural and enhanced interfacial effect, which could be rewarding to construct electron transportation tunnels, thus speeding up the Na+-diffusion kinetics. The modified strategy provides an efficient approach to intensify the electrochemical performance, which exhibits potential application of the NaVOPO4 cathode for NIBs.
Collapse
Affiliation(s)
- Xing Shen
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Miao Han
- Beijing Institute of Technology, Chongqing Innovation Center, Chongqing 401120, China
| | - Xiaowei Li
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Peng Zhang
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Chao Yang
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Huizhou Liu
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
| | - Yong-Sheng Hu
- Key Laboratory for Renewable Energy, Beijing Key Laboratory for New Energy Materials and Devices, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Junmei Zhao
- CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China
- Innovation Academy for Green Manufacture, Chinese Academy of Sciences, Beijing 100190, China
| |
Collapse
|
13
|
Ren Q, Yuan Y, Wang S. Interfacial Strategies for Suppression of Mn Dissolution in Rechargeable Battery Cathode Materials. ACS APPLIED MATERIALS & INTERFACES 2021; 14:23022-23032. [PMID: 34797650 DOI: 10.1021/acsami.1c20406] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
It is urgent to develop high-performance cathode materials for rechargeable batteries to address the globally growing concerns of energy shortage and environmental pollution. Among many candidate materials, Mn-based materials are promising and already used in some commercial batteries. Yet, their applicable future in reversible energy storage is severely plagued by the notorious Mn dissolution behaviors associated with structural instability during long-term cycling. As such, interfacial strategies aiming to protect Mn-based electrodes against Mn dissolution are being widely developed in recent years. A variety of interface-driven designs have been reported to function efficiently in suppressing Mn dissolution, necessitating a timely summary of recent advancements in the field. In this review, various interfaces, including the prebuilt interface and the electrochemically induced interface, to suppress Mn dissolution for Mn-based cathodes are discussed in terms of their fabrication details and functional outcomes. Perspectives for the future of interfacial strategies aiming at Mn dissolution suppression are also shared.
Collapse
Affiliation(s)
- Qingqing Ren
- College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang 325035, China
- Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences, Suzhou, Jiangsu 215123, China
| | - Yifei Yuan
- College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang 325035, China
| | - Shun Wang
- College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang 325035, China
| |
Collapse
|
14
|
Zhao Q, Wang W, Li YT, Wu N, Guo YD, Cheng WJ, Sun WW, Li JZ, Zhou AJ. Ion-exchange surface modification enhances cycling stability and kinetics of sodium manganese hexacyanoferrate cathode in sodium-ion batteries. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2021.138842] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
15
|
Yuan S, Qi J, Jiang M, Cui G, Liao XZ, Liu X, Tan G, Wen W, He YS, Ma ZF. Improved Cycling Performance of P2-Na 0.67Ni 0.33Mn 0.67O 2 Based on Sn Substitution Combined with Polypyrrole Coating. ACS APPLIED MATERIALS & INTERFACES 2021; 13:3793-3804. [PMID: 33448216 DOI: 10.1021/acsami.0c17080] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
P2-Na0.67Ni0.33Mn0.67O2 presents high working voltage with a theoretical capacity of 173 mAh g-1. However, the lattice oxygen on the particle surface participates in the redox reactions when the material is charged over 4.22 V. The resulting oxidized oxygen aggravates the electrolyte decomposition and transition metal dissolution, which cause severe capacity decay. The commonly reported cation substitution methods enhance the cycle stability by suppressing the high voltage plateau but lead to lower average working voltage and reduced capacity. Herein, we stabilized the lattice oxygen by a small amount of Sn substitution based on the strong Sn-O bond without sacrificing the high voltage performance and further protected the particle surface by polypyrrole (PPy) coating. The obtained Na0.67Ni0.33Mn0.63Sn0.04O2@PPy (3.3 wt %) composite showed excellent cycling stability with a reversible capacity of 137.6 (10) and 120.0 mAh g-1 (100 mA g-1) with a capacity retention of 95% (10 mA g-1, 50 cycles) and 82.5% (100 mA g-1, 100 cycles), respectively. The present work indicates that slight Sn substitution combined with PPy coating could be an effective approach to achieving superior cycling stability for high-voltage layered transition metal oxides.
Collapse
Affiliation(s)
- Siqi Yuan
- Shanghai Electrichemical Energy Devices Research Center, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Jizhen Qi
- i-Lab, CAS center for Excellence in Nanoscience, Suzhou Institute of Nano-Tech and Nano bionics, Chinese Academy of Sciences, Suzhou 215123, China
| | - Meidan Jiang
- Shanghai Electrichemical Energy Devices Research Center, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Guijia Cui
- Shanghai Electrichemical Energy Devices Research Center, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Xiao-Zhen Liao
- Shanghai Electrichemical Energy Devices Research Center, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Xi Liu
- In-Situ Center for physical Science, Department of Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Guoqiang Tan
- School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 100081, China
| | - Wen Wen
- Shanghai Synchrotron Advanced Research Institute, Chinese Academy of Science, Shanghai 201204, China
| | - Yu-Shi He
- Shanghai Electrichemical Energy Devices Research Center, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Zi-Feng Ma
- Shanghai Electrichemical Energy Devices Research Center, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| |
Collapse
|
16
|
Shkreba EV, Apraksin RV, Tolstopjatova EG, Kondratiev VV. Cathode material for sodium-ion batteries based on manganese hexacyanoferrate: the role of the binder component. J Solid State Electrochem 2020. [DOI: 10.1007/s10008-020-04746-4] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|