Boron-doped three-dimensional porous carbon framework/carbon shell encapsulated silicon composites for high-performance lithium-ion battery anodes

Deleterious volumetric expansion and poor electrical conductivity seriously hinder the application of Si-based anode materials in lithium-ion batteries (LIBs). Herein, boron-doped three-dimensional (3D) porous carbon framework/carbon shell encapsulated silicon (B-3DCF/Si@C) hybrid composites are successfully prepared by two coating and thermal treatment processes. The presence of 3D porous carbon skeleton and carbon shell effectively improves the mechanical properties of the B-3DCF/Si@C electrode during the cycling process, ensures the stability of the electrical contacts of the silicon particles and stabilizes the solid electrolyte interface (SEI) layer, thus enhancing the electronic conductivity and ion migration efficiency of the anode. The developed B-3DCF/Si@C anode has a high reversible capacity, excellent cycling stability and outstanding rate performance. A reversible capacity of 1288.5 mAh/g is maintained after 600 cycles at a current density of 400 mA g-1. The improved electrochemical performance is demonstrated in a full cell using a LiFePO4-based cathode. This study presents a novel approach that not only mitigates the large volume expansion effects in LIB anode materials, but also provides a reference model for the preparation of porous composites with various functionalities.

Air-Stable and Eco-Friendly Symmetrical Imine with Thiadiazole Moieties in Neutral and Protonated form for Perovskite Photovoltaics

This paper proposes molecular and supramolecular concepts for potential application in perovskite solar cells. New air-stable symmetrical imine, with thiadiazole moieties PPL2: (5E,6E)-N2,N5-bis(4-(diphenylamino)benzylidene)-1,3,4-thiadiazole-2,5-diamine), as a hole-transporting material was synthesised in a single-step reaction, starting with commercially available and relatively inexpensive reagents, resulting in a reduction in the cost of the final product compared to Spiro-OMeTAD. Moreover, camphorsulfonic acid (CSA) in both enantiomeric forms was used to change the HOMO-LUMO levels and electric properties of the investigated imine-forming complexes. Electric, optical, thermal, and structural studies of the imine and its complexes with CSA were carried out to characterise the new material. Imine and imine/CSA complexes were also characterised in depth by the proton Nuclear Magnetic Resonance 1H NMR method. The position of nitrogen in the thidiazole ring influences the basicity of donor centres, which results in protonation in the imine bond. Simple devices of ITO/imine (with or without CSA(-) or CSA(+))/Ag/ITO architecture were constructed, and a thermographic camera was used to find the defects in the created devices. Electric behaviour was also studied to demonstrate conductivity properties under the forward current. Finally, the electrical properties of imine and its protonated form with CSA were compared with Spiro-OMeTAD. In general, the analysis of thermal images showed a very similar response of the samples to the applied potential in terms of the homogeneity of the formed organic layer. The TGA analysis showed that the investigated imine exhibits good thermal stability in air and argon atmospheres.

Modification of the Ni-Rich Layered Cathode Material by Hf Addition: Synergistic Microstructural Engineering and Surface Stabilization

The rapid decline of the reversible capacity originating from microcracks and surface structural degradation during cycling is still a serious obstacle to the practical utilization of Ni-rich LiNixCoyAl1-x-yO2 (x ≥ 0.8) cathode materials. In this research, a feasible Hf-doping method is proposed to improve the electrochemical performance of LiNi0.9Co0.08Al0.02O2 (NCA90) through microstructural optimization and structural enhancement. The addition of Hf refines the primary particles of NCA90 and develops them into a short rod shape, making them densely arranged along the radial direction, which increases the secondary particle toughness and reduces their internal porosity. Moreover, Hf-doping stabilizes the layered structure and suppresses the side reactions through the introduction of robust Hf-O bonding. Multiple advantages of Hf-doping allowed significant improvement of the cycling stability of LiNi0.895Co0.08Al0.02Hf0.005O2 (NCA90-Hf0.5), with a reversible capacity retention rate of 95.3% after 100 cycles at 1 C, as compared with only 82.0% for the pristine NCA90. The proposed synergetic strategy combining microstructural engineering and crystal structure enhancement can effectively resolve the inherent capacity fading of Ni-rich layered cathodes, promoting their practical application for next-generation lithium-ion batteries.

Temperature and E-Poling Evolution of Structural, Vibrational, Dielectric, and Ferroelectric Properties of Ba1-xSrxTiO3 Ceramics (x = 0, 0.1, 0.2, 0.3, 0.4 and 0.45)

Lead-free Ba1-xSrxTiO3 (BST) (x = 0, 0.1, 0.2, 0.3, 0.4 and 0.45) ceramics were successfully prepared via the solid-state reaction route. A pure perovskite crystalline structure was identified for all compositions by X-ray diffraction analysis. The basic phase transition temperatures in these ceramics were studied over a wide temperature range. A change in symmetry from a tetragonal to cubic phase was detected, which was further proven by phonon anomalies in composition/temperature-dependent Raman spectra. The incorporation of Sr2+ into BaTiO3 (BT) lead to a shift in the phase transitions to lower temperatures, suppressing the ferroelectric properties and inducing relaxor-like behavior. Therefore, it was reasonable to suppose that the materials progressively lack long-range ordering. The initial second-harmonic generation (SHG) measurements demonstrated that the cubic phase of BST ceramics is not purely centrosymmetric over a wide temperature interval. We discussed the possible origin of the observed effects, and showed that electric field poling seems to reconstruct the structural ordering destroyed by the introduction of Sr2+ to BT. In the first approximation, substitution of Sr for larger Ba simply reduced the space for the off-central shift in Ti in the lattice and hence the domain polarization. A-site cation ordering in BST and its influence on the density of electronic states were also explored. The effect of doping with strontium ions in the BST compound on the density of electronic states was investigated using ab initio methods. As the calculations showed, doping BT with Sr2+ atoms led to an increase in the bandgap. The proposed calculations will also be used in the subsequent search for materials optimal for applications in photovoltaics.

Unveiling the Electrocatalytic Activity of the GdBa0.5Sr0.5Co2-xCuxO5+δ (x ≥ 1) Oxygen Electrodes for Solid Oxide Cells

The A-site cation-ordered GdBa0.5Sr0.5Co2-xCuxO5+δ (GBSCC) double perovskites are evaluated regarding the development of high-performance oxygen electrodes for reversible solid oxide cells (rSOCs). The aims are to maximally decrease the content of toxic and expensive cobalt by substitution with copper while at the same time improving or maintaining the required thermomechanical and electrocatalytic properties. Studies reveal that compositions with 1 ≤ x ≤ 1.15 are particularly interesting. Their thermal and chemical expansions are decreased, and sufficient transport properties are observed. Complementary density functional theory calculations give deeper insight into oxygen defect formation in the considered materials. Chemical compatibility with La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) and Ce0.9Gd0.1O2-δ (GDC) solid electrolytes is evaluated. It is documented that the GdBa0.5Sr0.5Co0.9Cu1.1O5+δ oxygen electrode enables obtaining very low electrode polarization resistance (Rp) values of 0.017 Ω cm2 at 850 °C as well as 0.111 Ω cm2 at 700 °C, which is lower in comparison to that of GdBa0.5Sr0.5CoCuO5+δ (respectively, 0.026 and 0.204 Ω cm2). Systematic distribution of relaxation times analyses allows studies of the electrocatalytic activity and distinguishing elementary steps of the electrochemical reaction at different temperatures. The rate-limiting process is found to be oxygen atom reduction, while the charge transfer at the electrode/electrolyte interface is significantly better with LSGM. The studies also allow elaborating on the catalytic role of the Ag current collector as compared with Pt. The electrodes manufactured using materials with x = 1 and 1.1 permit reaching high power outputs, exceeding 1240 mW cm-2 at 850 °C and 1060 mW cm-2 at 800 °C, for the LSGM-supported cells, which can also work in the electrolysis mode.

Well-Dispersed Fe Nanoclusters for Effectively Increasing the Initial Coulombic Efficiency of the SiO Anode

An efficient surface modification strategy is proposed to significantly increase the initial Coulombic efficiency (ICE) of SiO anode material. The SiO@Fe material with the Fe nanocluster homogeneously decorating on the SiO surface is successfully prepared by a chemical vapor deposition process. The well-dispersed Fe nanoclusters realize an Ohmic contact with lithium silicates, the commonly regarded irreversible lithiation product, which effectively lowers the electron conduction barriers and promotes the concomitant lithium-ion release of the lithium silicates upon the delithiation process, increasing the ICE of the SiO anode. The prepared SiO@Fe exhibits a much higher ICE of 87.2% compared to 64.4% of pristine SiO, with the largest increment (23%) never reported, except for the prelithiation, and delivers significantly enhanced cycling and rate performance. These findings provide an effective way to convert the "inert" phase to "active" which essentially increases the ICE of the electrode.

3D Flower-like TiO2 Nanostructures: Anatase-To-Rutile Phase Transformation and Photoelectrochemical Application

Flower-like TiO2 nanostructures were obtained by chemical oxidation of Ti foil using H2O2 combined with subsequent annealing. This paper offers an analysis of the phase transformation of 3D flower-like titanium dioxide nanostructures. The role of the annealing atmosphere, sample thickness, grain shape, and nanoflower size are discussed. The nanostructures were examined using SEM, XRD, and Raman spectroscopy. Due to the nature of these two processes, the morphology of these nanomaterials is complex, and is obtained through a reaction involving Ti foil and H2O2 at 80°C. A distinction is made between the layer composed of small grains at the substrate/oxide interface, elongated crystal-like structures, and outer spongle-like film. The annealing parameters, such as atmosphere (air or argon) and temperature (450 or 600 °C), affect phase composition. The photoelectrochemical performance of the anode based on flower-like TiO2 has been shown. The thickness and phase composition of the anodes are factors that strongly affect the photocurrent. The multiphase heterojunctions proposed for 3D flower-like TiO2 photoanodes in photoelectrochemical (PEC) cells suppose that the conduction band of anatase should be above rutile. The highest photoelectrochemical performance was obtained for a photoanode composed of 20–40% anatase and an associated thickness of 0.75–1.5 µm.

High-Entropy Sn0.8(Co0.2Mg0.2Mn0.2Ni0.2Zn0.2)2.2O4 Conversion-Alloying Anode Material for Li-Ion Cells: Altered Lithium Storage Mechanism, Activation of Mg, and Origins of the Improved Cycling Stability

Benefits emerging from applying high-entropy ceramics in Li-ion technology are already well-documented in a growing number of papers. However, an intriguing question may be formulated: how can the multicomponent solid solution-type material ensure stable electrochemical performance? Utilizing an example of nonequimolar Sn-based Sn_0.8(Co_0.2Mg_0.2Mn_0.2Ni_0.2Zn_0.2)_2.2O₄ high-entropy spinel oxide, we provide a comprehensive model explaining the observed very good cyclability. The material exhibits a high specific capacity above 600 mAh g^-1 under a specific current of 50 mA g^-1 and excellent capacity retention near 100% after 500 cycles under 200 mA g^-1. The stability originates from the conversion-alloying reversible reactivity of the amorphous matrix, which forms during the first lithiation from the initial high-entropy structure, and preserves the high level of cation disorder at the atomic scale. In the altered Li-storage mechanism in relation to the simple oxides, the unwanted aggregated metallic grains are not exsolved from the anode and therefore do not form highly lithiated phases characterized by large volumetric changes. Also, the electrochemical activity of Mg from the oxide matrix can be clearly observed. Because the studied compound was prepared by a conventional solid-state route, implementation of the presented approach is facile and appears usable for any oxide anode material containing a high-entropy mixture of elements.

Synthesis and Properties of the Gallium-Containing Ruddlesden-Popper Oxides with High-Entropy B-Site Arrangement

For the first time, the possibility of obtaining B-site disordered, Ruddlesden-Popper type, high-entropy oxides has been proven, using as an example the LnSr(Co,Fe,Ga,Mn,Ni)O₄ series (Ln = La, Pr, Nd, Sm, or Gd). The materials were synthesized using the Pechini method, followed by sintering at a temperature of 1200 °C. The XRD analysis indicated the single-phase, I4/mmm structure of the Pr-, Nd-, and Sm-based materials, with a minor content of secondary phase precipitates in La- and Gd-based materials. The SEM + EDX analysis confirms the homogeneity of the studied samples. Based on the oxygen non-stoichiometry measurements, the general formula of LnSr(Co,Fe,Ga,Mn,Ni)O_4+δ, is established, with the content of oxygen interstitials being surprisingly similar across the series. The temperature dependence of the total conductivity is similar for all materials, with the highest conductivity value of 4.28 S/cm being reported for the Sm-based composition. The thermal expansion coefficient is, again, almost identical across the series, with the values varying between 14.6 and 15.2 × 10^-6 K^-1. The temperature stability of the selected materials is verified using the in situ high-temperature XRD. The results indicate a smaller impact of the lanthanide cation type on the properties than has typically been reported for conventional Ruddlesden-Popper type oxides, which may result from the high-entropy arrangement of the B-site cations.

Formation of Solid Solutions and Physicochemical Properties of the High-Entropy Ln1-xSrx(Co,Cr,Fe,Mn,Ni)O3-δ (Ln = La, Pr, Nd, Sm or Gd) Perovskites

Phase composition, crystal structure, and selected physicochemical properties of the high entropy Ln(Co,Cr,Fe,Mn,Ni)O_3-δ (Ln = La, Pr, Gd, Nd, Sm) perovskites, as well as the possibility of Sr doping in Ln_1-xSr_x(Co,Cr,Fe,Mn,Ni)O_3-δ series, are reported is this work. With the use of the Pechini method, all undoped compositions are successfully synthesized. The samples exhibit distorted, orthorhombic or rhombohedral crystal structure, and a linear correlation is observed between the ionic radius of Ln and the value of the quasi-cubic perovskite lattice constant. The oxides show moderate thermal expansion, with a lack of visible contribution from the chemical expansion effect. Temperature-dependent values of the total electrical conductivity are reported, and the observed behavior appears distinctive from that of non-high entropy transition metal-based perovskites, beyond the expectations based on the rule-of-mixtures. In terms of formation of solid solutions in Sr-doped Ln_1-xSr_x(Co,Cr,Fe,Mn,Ni)O_3-δ materials, the results indicate a strong influence of the Ln radius, and while for La-based series the Sr solubility limit is at the level of x_max = 0.3, for the smaller Pr it is equal to just 0.1. In the case of Nd-, Sm- and Gd-based materials, even for the x_Sr = 0.1, the formation of secondary phases is observed on the SEM + EDS images.

Micro/Nano Na3V2(PO4)3/N-Doped Carbon Composites with a Hierarchical Porous Structure for High-Rate Pouch-Type Sodium-Ion Full-Cell Performance

Polyanion-type Na₃V₂(PO₄)₃ (NVP) is an overwhelmingly attractive cathode material for sodium-ion batteries (SIBs) because of its high structural stability and fast Na⁺ mobility. However, its practical application is strongly plagued by either nanoscale particle size or poor rate performance. Herein, a micro/nanocomposite NVP cathode with a hierarchical porous structure is proposed to solve the problem. The microscale NVP material assembled by interconnected nanoflakes with N-doped carbon coating that is capable of simultaneously providing fast carrier transmission dynamics and outstanding structural integrity exhibits precedent sodium-storage behavior. It delivers a superior rate capability (79.1 mAh g^-1 at 200C) and excellent long-life cycling (capacity retention of 73.4% after 10 000 cycles at 100C). Remarkably, a pouch-type sodium-ion full cell consisting of the as-obtained NVP cathode and a hard carbon anode demonstrates the gravimetric energy density as high as 212 Wh kg^-1 and an exceptional rate performance (71.8 mAh g^-1 at 10C). Such structural design of fabricating micro/nanocomposite electrode materials is expected to accelerate the practical applications of SIBs for large-scale energy storage.

Unveiling the effects of A-site substitutions on the oxygen ion migration in A2−xA′xNiO4+δ by first principles calculations

First principles calculations unveil the effects of A-site substitutions on the interstitial oxygen formation and migration energy in A_2−xA′_xNiO_4+δ.

(101) Plane-Oriented SnS2 Nanoplates with Carbon Coating: A High-Rate and Cycle-Stable Anode Material for Lithium Ion Batteries

Tin disulfide is considered to be a promising anode material for Li ion batteries because of its high theoretical capacity as well as its natural abundance of sulfur and tin. Practical implementation of tin disulfide is, however, strongly hindered by inferior rate performance and poor cycling stability of unoptimized material. In this work, carbon-encapsulated tin disulfide nanoplates with a (101) plane orientation are prepared via a facile hydrothermal method, using polyethylene glycol as a surfactant to guide the crystal growth orientation, followed by a low-temperature carbon-coating process. Fast lithium ion diffusion channels are abundant and well-exposed on the surface of such obtained tin disulfide nanoplates, while the designed microstructure allows the effective decrease of the Li ion diffusion length in the electrode material. In addition, the outer carbon layer enhances the microscopic electrical conductivity and buffers the volumetric changes of the active particles during cycling. The optimized, carbon coated tin disulfide (101) nanoplates deliver a very high reversible capacity (960 mAh g^-1 at a current density of 0.1 A g^-1), superior rate capability (796 mAh g^-1 at a current density as high as 2 A g^-1), and an excellent cycling stability of 0.5 A g^-1 for 300 cycles, with only 0.05% capacity decay per cycle.

Hierarchically structured lithium titanate for ultrafast charging in long-life high capacity batteries

High-performance Li-ion batteries require materials with well-designed and controlled structures on nanometre and micrometre scales. Electrochemical properties can be enhanced by reducing crystallite size and by manipulating structure and morphology. Here we show a method for preparing hierarchically structured Li4Ti5O12 yielding nano- and microstructure well-suited for use in lithium-ion batteries. Scalable glycothermal synthesis yields well-crystallized primary 4-8 nm nanoparticles, assembled into porous secondary particles. X-ray photoelectron spectroscopy reveals presence of Ti+4 only; combined with chemical analysis showing lithium deficiency, this suggests oxygen non-stoichiometry. Electron microscopy confirms hierarchical morphology of the obtained material. Extended cycling tests in half cells demonstrates capacity of 170 mAh g-1 and no sign of capacity fading after 1,000 cycles at 50C rate (charging completed in 72 s). The particular combination of nanostructure, microstructure and non-stoichiometry for the prepared lithium titanate is believed to underlie the observed electrochemical performance of material.

Oxygen storage properties of hexagonal HoMnO3+δ

Structural and oxygen content changes of hexagonal HoMnO_3+δ manganite at the stability boundary in the perovskite phase have been studied by X-ray diffraction and thermogravimetry using in situ oxidation and reduction processes at elevated temperatures in oxygen and air.

MoS2 Nanosheets Vertically Grown on Graphene Sheets for Lithium-Ion Battery Anodes

A designed nanostructure with MoS2 nanosheets (NSs) perpendicularly grown on graphene sheets (MoS2/G) is achieved by a facile and scalable hydrothermal method, which involves adsorption of Mo7O24(6-) on a graphene oxide (GO) surface, due to the electrostatic attraction, followed by in situ growth of MoS2. These results give an explicit proof that the presence of oxygen-containing groups and pH of the solution are crucial factors enabling formation of a lamellar structure with MoS2 NSs uniformly decorated on graphene sheets. The direct coupling of edge Mo of MoS2 with the oxygen from functional groups on GO (C-O-Mo bond) is proposed. The interfacial interaction of the C-O-Mo bonds can enhance electron transport rate and structural stability of the MoS2/G electrode, which is beneficial for the improvement of rate performance and long cycle life. The graphene sheets improve the electrical conductivity of the composite and, at the same time, act not only as a substrate to disperse active MoS2 NSs homogeneously but also as a buffer to accommodate the volume changes during cycling. As an anode material for lithium-ion batteries, the manufactured MoS2/G electrode manifests a stable cycling performance (1077 mAh g(-1) at 100 mA g(-1) after 150 cycles), excellent rate capability, and a long cycle life (907 mAh g(-1) at 1000 mA g(-1) after 400 cycles).

High-Performance Anode Material Sr2FeMo0.65Ni0.35O6-δ with In Situ Exsolved Nanoparticle Catalyst

A metallic nanoparticle-decorated ceramic anode was prepared by in situ reduction of the perovskite Sr2FeMo0.65Ni0.35O6-δ (SFMNi) in H2 at 850 °C. The reduction converts the pure perovksite phase into mixed phases containing the Ruddlesden-Popper structure Sr3FeMoO7-δ, perovskite Sr(FeMo)O3-δ, and the FeNi3 bimetallic alloy nanoparticle catalyst. The electrochemical performance of the SFMNi ceramic anode is greatly enhanced by the in situ exsolved Fe-Ni alloy nanoparticle catalysts that are homogeneously distributed on the ceramic backbone surface. The maximum power densities of the La0.8Sr0.2Ga0.8Mg0.2O3-δ electrolyte supported a single cell with SFMNi as the anode reached 590, 793, and 960 mW cm(-2) in wet H2 at 750, 800, and 850 °C, respectively. The Sr2FeMo0.65Ni0.35O6-δ anode also shows excellent structural stability and good coking resistance in wet CH4. The prepared SFMNi material is a promising high-performance anode for solid oxide fuel cells.

Structural, Transport and Electrochemical Properties of LiFePO₄ Substituted in Lithium and Iron Sublattices (Al, Zr, W, Mn, Co and Ni)

LiFePO₄ is considered to be one of the most promising cathode materials for lithium ion batteries for electric vehicle (EV) application. However, there are still a number of unsolved issues regarding the influence of Li and Fe-site substitution on the physicochemical properties of LiFePO₄. This is a review-type article, presenting results of our group, related to the possibility of the chemical modification of phosphoolivine by introduction of cation dopants in Li and Fe sublattices. Along with a synthetic review of previous papers, a large number of new results are included. The possibility of substitution of Li⁺ by Al3+, Zr4+, W6+ and its influence on the physicochemical properties of LiFePO₄ was investigated by means of XRD, SEM/EDS, electrical conductivity and Seebeck coefficient measurements. The range of solid solution formation in Li1-3xAlxFePO₄, Li1-4xZrxFePO₄ and Li1-6xWxFePO₄ materials was found to be very narrow. Transport properties of the synthesized materials were found to be rather weakly dependent on the chemical composition. The battery performance of selected olivines was tested by cyclic voltammetry (CV). In the case of LiFe1-yMyPO₄ (M = Mn, Co and Ni), solid solution formation was observed over a large range of y (0 < y ≤ 1). An increase of electrical conductivity for the substitution level y = 0.25 was observed. Electrons of 3d metals other than iron do not contribute to the electrical properties of LiFe1-yMyPO₄, and substitution level y > 0.25 leads to considerably lower values of σ. The activated character of electrical conductivity with a rather weak temperature dependence of the Seebeck coefficient suggests a small polaron-type conduction mechanism. The electrochemical properties of LiFe1-yMyPO₄ strongly depend on the Fe substitution level.