Dual-Acceptor-Based Upconversion Luminescence Nanosensor with Enhanced Quenching Efficiency for in Situ Imaging and Quantification of MicroRNA in Living Cells

Ultrasensitive upconverting nanoprobes for in situ imaging of drug-induced liver injury using miR-122 as the biomarker

Drug-induced liver injury (DILI) is a frequent adverse drug reaction. The current clinical diagnostic methods are inadequate for accurate and early detection of DILI due to the lack of effective diagnostic biomarkers. Hepatocyte-specific miR-122 is released from injured hepatocytes promptly and its efflux is significantly correlated with the progression of DILI. Therefore, achieving precise in situ detection of miR-122 with high sensitivity is vital for early visualization of DILI. Herein, a new nanoprobe, consisting of miR-122 aptamer, upconversion nanoparticles (UCNPs) and Prussian blue nanoparticles (PBNPs) was introduced for the early and sensitive detection of DILI in situ. As the nanoprobes reached in the liver, miR-122 aptamer-based entropy-driven strand displacement (ESDR) signal amplification reaction was triggered and luminescence resonance energy transfer (LRET) between UCNPs and PBNPs was responded to achieve the high-fidelity detection of DILI. A negative correlation was observed between the intensity of upconversion luminescence (UCL) and the concentration of miR-122. UCL imaging conducted both in vivo and ex vivo indicated that a reduction in miR-122 concentration led to an increase in UCL intensity, revealing a precise state of DILI. The detection technique demonstrated a positive correlation between signal intensity and severity, offering a more straightforward and intuitive method of visualizing DILI.

A two-layer circuit cascade-based DNA machine for highly sensitive miRNA imaging in living cells

Sensitive detection of microRNA (miRNA), one of the most promising biomarkers, plays crucial roles in cancer diagnosis. However, the low expression level of miRNA makes it extremely urgent to develop ultrasensitive and highly selective strategies for quantification of miRNA. Herein, a DNA machine is rationally constructed for amplified detection and imaging of low-abundance miRNA in living cells based on the toehold-mediated strand displacement reaction (TMSDR). The isothermal and enzyme-free DNA machine with low background leakage is fabricated by integrating two DNA circuits into a cascade system, in which the output of one circuit serves as the input of the other one. Once the DNA machine is transfected into breast cancer cells, the overexpressed miRNA-203 initiates the first-layer circuit through TMSDR, leading to the concentration variation of fuel strands, which further influences the assembly of hairpin DNA in the second-layer circuit and the occurrence of fluorescence resonance energy transfer (FRET) for fluorescence imaging. Benefiting from the cascade of the two-layer amplification reaction, the proposed DNA machine acquires a detection limit down to 4 fM for quantification of miR-203 and a 10 000-fold improvement in amplification efficiency over the single circuit. Therefore, the two-layer circuit cascade-based DNA machine provides an effective platform for amplified analysis of low-abundance miRNA with high sensitivity, which holds great promise in biomedical and clinical research.

Understanding FRET in Upconversion Nanoparticle Nucleic Acid Biosensors

Upconversion nanoparticles (UCNPs) have been frequently applied in Förster resonance energy transfer (FRET) bioanalysis. However, the understanding of how surface coatings, bioconjugation, and dye-surface distance influence FRET biosensing performance has not significantly advanced. Here, we investigated UCNP-to-dye FRET DNA-hybridization assays in H₂O and D₂O using ∼24 nm large NaYF₄:Yb³⁺,Er³⁺ UCNPs coated with thin layers of silica (SiO₂) or poly(acrylic acid) (PAA). FRET resulted in strong distance-dependent PL intensity changes. However, the PL decay times were not significantly altered because of continuous Yb³⁺-to-Er³⁺ energy migration during Er³⁺-to-dye FRET. Direct bioconjugation of DNA to the thin PAA coating combined with the closest possible dye-surface distance resulted in optimal FRET performance with minor influence from competitive quenching by H₂O. The better comprehension of UCNP-to-dye FRET was successfully translated into a microRNA (miR-20a) FRET assay with a limit of detection of 100 fmol in a 80 μL sample volume.

Recent advances in tumor biomarker detection by lanthanide upconversion nanoparticles

Early tumor diagnosis could reliably predict the behavior of tumors and significantly reduce their mortality. Due to the response to early cancerous changes at the molecular or cellular level, tumor biomarkers, including small molecules, proteins, nucleic acids, exosomes, and circulating tumor cells, have been employed as powerful tools for early cancer diagnosis. Therefore, exploring new approaches to detect tumor biomarkers has attracted a great deal of research interest. Lanthanide upconversion nanoparticles (UCNPs) provide numerous opportunities for bioanalytical applications. When excited by low-energy near-infrared light, UCNPs exhibit several unique properties, such as large anti-Stoke shifts, sharp emission lines, long luminescence lifetimes, resistance to photobleaching, and the absence of autofluorescence. Based on these excellent properties, UCNPs have demonstrated great sensitivity and selectivity in detecting tumor biomarkers. In this review, an overview of recent advances in tumor biomarker detection using UCNPs has been presented. The key aspects of this review include detection mechanisms, applications in vitro and in vivo, challenges, and perspectives of UCNP-based tumor biomarker detection.

Upconverting nanoparticles based nanodevice for DNAzymes amplified miRNAs detection and artificially controlled chemo-gene therapy

Despite the great promise of cancer theranostic platforms, accurate diagnosis and effective treatment are still highly challenging. In this work, nanodevice for intracellular miRNAs detection and artificially controlled drug releasement was developed based on upconverting nanoparticles (UCNPs). For analysis aspect, DNAzymes amplified miRNA-21 detection was carried out, giving excellent sensitivity with detection limits of 1.8 × 10^-11 M. Moreover, intracellular fluorescence imaging permitted in situ diagnoses of miRNA-21 expression in living cells. Once the test identifies tumor markers, treatment can be performed. Here, artificially controlled chemo-gene synergetic therapy nanodevice was obtained by integrating UCNPs with photocleavable linkers (PC-linkers). In vitro and in vivo experiments verified the potential application of prepared nanodevice in cancer theranostics.

Carbazole-Functionalized Dipicolinato LnIII Complexes Show Two-Photon Excitation and Viscosity-Sensitive Metal-Centered Emission

Eu^III and Yb^III complexes with the carbazole-dipicolinato ligand dpaCbz^2-, namely K₃[Eu(dpaCbz)₃] and K₃[Yb(dpaCbz)₃], were isolated. The Eu^III complex displayed metal-centred emission upon one-photon excitation with a sensitized emission efficiency Φ L Ln of 1.8±0.3 %, corresponding to an intrinsic emission efficiency Φ Ln Ln of 46% and a sensitization efficiency of η_sens 3.9%, with an emission lifetime of the emissive state τ of 1.087±0.005 ms. The Yb^III complex displayed Φ L Ln of 0.010±0.001 %, and a τ of 2.32±0.06 μs. The Eu^III-centred emission was sensitized as well upon two-photon excitation and a two-photon absorption cross-section σ_2PA of 63 GM at 750 nm was determined for the complex. The one- or two-photon sensitized emission intensity of the Eu^III complex changes by more than two-fold when the solvent viscosity is varied in the range 0.5 - 200 cP and the emission is independent of dissolved oxygen. The Yb^III complex displays a change in emission intensity as well. However, in this case, a dependence of the emission intensity on dissolved oxygen content was observed.

Sense and Validate: Fluorophore/Mass Dual-Encoded Nanoprobes for Fluorescence Imaging and MS Quantification of Intracellular Multiple MicroRNAs

Simultaneously monitoring and quantifying intracellular multiple microRNAs (miRNAs) is highly essential to clinical diagnosis and pathological research. However, revealing the intracellular distribution of multiple miRNAs while determining their content in a multiplex and quantitative format remains challenging. Considering the respective technical merit of fluorescence imaging and mass spectrometry (MS) in in situ detection and multiplex assaying, we herein propose fluorophore/mass dual-encoded nanoprobes (FMNPs) that can execute target-triggered hairpin self-assembly to enable in situ amplified imaging and follow-up MS quantification of intracellular multiple miRNAs. The FMNPs responsive to the target miRNA were constructed by codecorating gold nanoparticles (AuNPs) with locked hairpin DNA probes (LH1) and corresponding mass tags (MTs) for fluorescent and mass spectrometric dual-modal readout. Cellular miRNAs can separately trigger recycled hairpin self-assembly, leading to the continuous liberation of fluorophore-labeled bolt DNA (bDNA) for fluorescence imaging in cells. Moreover, the postreaction FMNPs afford an extra chance to validate the fluorescence output of miRNA-21 and miRNA-141 by accurate MS quantification relying on the ion signal of the barcoded MTs. Fluorescence imaging and MS quantification of miRNA-21 and miRNA-141 have also been successfully accomplished in different cell lines, highlighting its potential in cell subtyping. This "sense-and-validate" strategy creates a new modality for assaying multiple intracellular miRNAs and holds great promise in unveiling multicomponent-involved events in cellular processes and determining multiple biomarkers in accurate clinical diagnosis.

Shedding Light on DNA-Based Nanoprobes for Live-Cell MicroRNA Imaging

DNA-based nanoprobes integrated with various imaging signals have been employed for fabricating versatile biosensor platforms for the study of intracellular biological process and biomarker detection. The nanoprobes developments also provide opportunities for endogenous microRNA (miRNA) in situ analysis. In this review, the authors are primarily interested in various DNA-based nanoprobes for miRNA biosensors and declare strategies to reveal how to customize the desired nanoplatforms. Initially, various delivery vehicles for nanoprobe architectures transmembrane transport are delineated, and their biosecurity and ability for resisting the complex cellular environment are evaluated. Then, the novel strategies for designing DNA sequences as target miRNA specific recognition and signal amplification modules for miRNA detection are presented. Afterward, recent advances in imaging technologies to accurately respond and produce significant signal output are summarized. Finally, the challenges and future directions in the field are discussed.

Engineered lanthanide-doped upconversion nanoparticles for biosensing and bioimaging application

Various fluctuations of intracellular ions, biomolecules, and other conditions in the physiological environment play crucial roles in fundamental biological processes. These factors are of great importance for analysis in biomedical detection. Nevertheless, developments of the simple, rapid, and accurate proof for specific detection still encounter major challenges. Upconversion nanoparticles (UCNPs), which could absorb multiple low-energy near-infrared light (NIR) photon excitation and emits high-energy photons caused by anti-Stokes shift, show unique upconversion luminescence (UCL) properties, for example, sharp emission band, high physicochemical stability like near-zero photobleaching, photo blinking in biological tissues, and long luminescence lifetime. Furthermore, the NIR used for the light source to excite UCNPs enable lower photo-damage effect and deeper penetration of tissue, and in the meantime, it can avoid the auto-fluorescence and light scattering from biological tissue interference. Thus, the lanthanide-doped UCNP-based functional platform with controlled structure, crystalline phase, size, and multicolor emission has become an appropriate nanomaterial for bioapplications such as biosensing, bioimaging, drug release, and therapies. In this review, the recent progress about synthesis and biomedical applications of UCNPs related to sensing and bioimaging is summarized. Firstly, the different luminescence mechanisms of the upconversion process are presented. Secondly, four of the most common methods for synthesizing UCNPs are compared as well as the advantages and disadvantages of these synthetic routes. Meanwhile, the surface modification of lanthanide-doped UCNPs was introduced to pave the way for their biochemistry applications. Next, this review detailed the biological applications of lanthanide-doped UCNPs, particularly in bioimaging, including UCL and multi-modal imaging and biosensing (monitoring intracellular ions and biomolecules). Finally, the challenges and future perspectives in materials science and biomedical fields of UCNPs are concluded: the low quantum yield of the upconversion process should be considered when they are executed as imaging contrast agents. And the biosafety of lanthanide-doped UCNPs needs to be evaluated.

Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors

Lanthanide-doped upconversion nanoparticles (UCNPs), characterized by converting low-energy excitation to high-energy emission, have attracted considerable interest due to their inherent advantages of large anti-Stokes shifts, sharp and narrow multicolor emissions, negligible autofluorescence background interference, and excellent chemical- and photo-stability. These features make them promising luminophores for sensing applications. In this review, we give a comprehensive overview of lanthanide-doped upconversion nanophosphors including the fundamental principle for the construction of UCNPs with efficient upconversion luminescence (UCL), followed by state-of-the-art strategies for the synthesis and surface modification of UCNPs, and finally describing current advances in the sensing application of upconversion-based probes for the quantitative analysis of various analytes including pH, ions, molecules, bacteria, reactive species, temperature, and pressure. In addition, emerging sensing applications like photodetection, velocimetry, electromagnetic field, and voltage sensing are highlighted.

Engineering DNA on the Surface of Upconversion Nanoparticles for Bioanalysis and Therapeutics

Surface modification of inorganic nanomaterials with biomolecules has enabled the development of composites integrated with extensive properties. Lanthanide ion-doped upconversion nanoparticles (UCNPs) are one class of inorganic nanomaterials showing optical properties that convert photons of lower energy into higher energy. Additionally, DNA oligonucleotides have exhibited powerful capabilities for organizing various nanomaterials with versatile topological configurations. Through rational design and nanotechnology, DNA-based UCNPs offer predesigned functionality and potential. To fully harness the capabilities of UCNPs integrated with DNA, various DNA-UCNP composites have been developed for diagnosis and therapeutics. In this review, beginning with the introduction of the UCNPs and the conjugation of DNA strands on the surface of UCNPs, we present an overview of the recent progress of DNA-UCNP composites while focusing on their applications for bioanalysis and therapeutics.

Dual-Modal FexCuySe and Upconversion Nanoparticle Assemblies for Intracellular MicroRNA-21 Detection

In situ quantification and imaging of low-level intracellular microRNAs (miRs) are important areas in biosensor research. Herein, DNA-driven Fe_xCu_ySe@upconversion nanoparticle (UCNP) core@satellite nanostructures were developed to probe microRNA-21 (miR-21). Fe_xCu_ySe@UCNP probes displayed dual signals: upconversion luminescence (UCL) and magnetic resonance imaging (MRI). In the presence of miR-21, the luminescence signal was restored and the T₂ value was significantly increased because of dissociation of UCNPs from the assemblies. There was a good linear relationship between the dual signals and the expression levels of miR-21 in the range of 0.035-31.824 amol/ng_RNA. The limit of detection (LOD) was 0.0058 amol/ng_RNA for the luminescence intensity and 0.0182 amol/ng_RNA for the MRI signal. This method opens a new avenue for intracellular miR-21 detection with high sensitivity and specificity.

Fast detection of E. coli with a novel fluorescent biosensor based on a FRET system between UCNPs and GO@Fe3O4 in urine specimens

Biosensors based on nanomaterials are becoming a research hotspot for the rapid detection of pathogenic bacteria. Herein, a "turn-on" fluorescent biosensor based on a FRET system was constructed for the fast detection of a representative pathogenic microorganism, namely, E. coli, which causes most urinary tract infections. This biosensor was constructed by utilizing synthesized UCNPs as fluorescent donors with stable luminescence performance in complex biological samples and GO@Fe3O4 as a receptor with both excellent adsorption ability and fluorescence quenching ability. A specific ssDNA selected as an aptamer which could recognize E. coli was immobilized on the UCNPs to form UCNP-Apt nanoprobes. The nanoprobes were adsorbed on the surface of GO@Fe3O4 through the π-stacking interactions between aptamers and GO. In the presence of E. coli, UCNP-Apt nanoprobes detached from GO@Fe3O4 due to the specific recognition of aptamers and bacteria, resulting in obvious fluorescence recovery, and the concentration of bacteria was positively correlated with the intensity of the fluorescence signal; such a "turn-on" signal output mode ensures excellent precision. In addition, the easy magnetic separation of GO@Fe3O4 simplifies the operation process, helping the sensor detect bacteria in 30 minutes with a linear range from 103 to 107 CFU mL-1 and a limit of detection of 467 CFU mL-1. Moreover, recovery test results also showed that the sensor has clinical application potential for the rapid detection of pathogenic microorganisms in complex biological samples.

Multifunctional titanium phosphate carriers for enhancing drug delivery and evaluating real-time therapeutic efficacy of a hydrophobic drug component in Euphorbia kansui

Nanoparticles are often used to serve as drug delivery systems to improve the therapeutic efficacy of some hydrophobic drugs. In this work, PEG and peptide-modified titanium phosphate nanoparticles (TiP-PEG/peptide) were synthesized to enhance the drug delivery efficacy of tirucalla-8,24-diene-3β,11β-diol-7-one (KS-01), a major bioactive and hydrophobic component extracted from Euphorbia kansui. This drug delivery system with a loading efficiency of about 29.8 mg KS-01/1 g TiP-PEG/peptide exerted a significantly lower cell viability rate of MCF-7 than free KS-01, indicating that these carriers can effectively increase the therapeutic efficacy by improving its water solubility. Moreover, according to the fluorescence intensity of FAM which can be generated by caspase-3 cleaving DEVD-embedded peptide, the caspase-3 level could be determined and the therapeutic efficacy could be visualized in real time.

Lanthanide-Based Nanosensors: Refining Nanoparticle Responsiveness for Single Particle Imaging of Stimuli

Lanthanide nanoparticles (LNPs) are promising sensors of chemical, mechanical, and temperature changes; they combine the narrow-spectral emission and long-lived excited states of individual lanthanide ions with the high spatial resolution and controlled energy transfer of nanocrystalline architectures. Despite considerable progress in optimizing LNP brightness and responsiveness for dynamic sensing, detection of stimuli with a spatial resolution approaching that of individual nanoparticles remains an outstanding challenge. Here, we highlight the existing capabilities and outstanding challenges of LNP sensors, en-route to nanometer-scale, single particle sensor resolution. First, we summarize LNP sensor read-outs, including changes in emission wavelength, lifetime, intensity, and spectral ratiometric values that arise from modified energy transfer networks within nanoparticles. Then, we describe the origins of LNP sensor imprecision, including sensitivity to competing conditions, interparticle heterogeneities, such as the concentration and distribution of dopant ions, and measurement noise. Motivated by these sources of signal variance, we describe synthesis characterization feedback loops to inform and improve sensor precision, and introduce noise-equivalent sensitivity as a figure of merit of LNP sensors. Finally, we project the magnitudes of chemical and pressure stimulus resolution achievable with single LNPs at nanoscale resolution. Our perspective provides a roadmap for translating ensemble LNP sensing capabilities to the single particle level, enabling nanometer-scale sensing in biology, medicine, and sustainability.

Covalent Attachment of Active Enzymes to Upconversion Phosphors Allows Ratiometric Detection of Substrates

Upconverting phosphors (UCPs) convert multiple low energy photons into higher energy emission via the process of photon upconversion and offer an attractive alternative to organic fluorophores for use as luminescent probes. Here, UCPs were capped with functionalized silica in order to provide a surface to covalently conjugate proteins with surface-accessible cysteines. Variants of green fluorescent protein (GFP) and the flavoenzyme pentaerythritol tetranitrate reductase (PETNR) were then attached via maleimide-thiol coupling in order to allow energy transfer from the UCP to the GFP or flavin cofactor of PETNR, respectively. PETNR retains its activity when coupled to the UCPs, which allows reversible detection of enzyme substrates via ratiometric sensing of the enzyme redox state.

Opportunities for Persistent Luminescent Nanoparticles in Luminescence Imaging of Biological Systems and Photodynamic Therapy

The use of luminescence in biological systems allows us to diagnose diseases and understand cellular processes. Persistent luminescent materials have emerged as an attractive system for application in luminescence imaging of biological systems; the afterglow emission grants background-free luminescence imaging, there is no need for continuous excitation to avoid tissue and cell damage due to the continuous light exposure, and they also circumvent the depth penetration issue caused by excitation in the UV-Vis. This review aims to provide a background in luminescence imaging of biological systems, persistent luminescence, and synthetic methods for obtaining persistent luminescent materials, and discuss selected examples of recent literature on the applications of persistent luminescent materials in luminescence imaging of biological systems and photodynamic therapy. Finally, the challenges and future directions, pointing to the development of compounds capable of executing multiple functions and light in regions where tissues and cells have low absorption, will be discussed.

Plasmonic Modulation of the Upconversion Luminescence Based on Gold Nanorods for Designing a New Strategy of Sensing MicroRNAs

Upconversion nanoparticles (UCNPs) have potential applications in biosensing and bioimaging. However, the UCNPs-based sensors constructed by luminescence resonance energy transfer (LRET) always suffer from low quenching efficiency, hindering their application. Therefore, exploring a new strategy to resolve this issue is highly desirable. Herein, a strategy based on the surface plasmon resonance (SPR) effect of gold nanorods (AuNRs) is presented. The luminescence of UCNPs was modulated by adjusting the SiO₂ thickness of AuNRs@SiO₂ and the structure of UCNPs; an enhancement factor of ≈50 times was obtained. Based on the results of the SPR effect of AuNRs, we designed two kinds of potential upconversion microRNA sensors using microRNA-21 as a model to resolve the problem of the lower quenching efficiency resulting from a dye as a quencher. Studies revealed that the proposed strategy could be successfully used to construct upconversion microRNA sensors for avoiding the limitation of the low quenching efficiency. The sensitivity was ≈10 000 times higher than that of the upconversion sensor using dyes as quenchers. Importantly, the assay of microRNA-21 was successfully achieved using this sensor in human serum samples and human breast cancer cell (MCF-7) lysates. It provides a new method for designing upconversion microRNA sensors and may have potential for use in biosensing and bioimaging.

Spatiotemporally Controllable MicroRNA Imaging in Living Cells via a Near-Infrared Light-Activated Nanoprobe

In situ spatiotemporal microRNA (miRNA) imaging in mammal cells plays an essential role in illustrating its structures and biological functions. Herein, we proposed a near-infrared (NIR) light-activated nanoprobe for high-sensitive in situ controllable miRNA imaging in living cells. The NIR-activated nanoprobe employed an upconversion nanoparticle that acted as a NIR-to-UV transducer to trigger the following photocleavage toward a dumbbell DNA probe tethered on the surface of the nanoparticle. The structure change of the dumbbell probe then induced a catalytic hairpin assembly of target miRNAs, by which in situ readout of the amplified fluorescence signal was enabled. Additionally, both intracellular miRNA imaging and accurate quantification in live cells were realized without damaging the cell membranes. Compared with conventional in situ strategies, the proposed approach remarkedly increases imaging efficiency by eliminating those unfavored intercellular molecular imaging backgrounds. We assured that the proposed NIR-activated miRNA sensing strategy will add to the advancement for bioanalysis in living systems, which is of crucial importance in the diagnosis of various human diseases, especially cancers.

A sensitive upconverting nanoprobe based on signal amplification technology for real-time in situ monitoring of drug-induced liver injury

Drug-induced liver injury (DILI) is increasingly recognized as one of the most challenging global health problems. Conventional in vitro detection methods not only lack specificity and sensitivity but also cannot achieve real-time, straightforward visualization of hepatotoxicity in vivo. Liver-specific miR122 has been observed to be a superior and sensitive biomarker for DILI diagnosis. Herein, a sensitive upconverting nanoprobe synthesized with upconversion nanoparticles (UCNPs) and gold nanorods (GNR) was designed to diagnose hepatotoxicity in vivo. After injection, the nanoprobes accumulated in the liver and were activated by miR122, and the signal amplification technology fully yielded luminescent amplification; hence, the detection sensitivity was improved. Because of the high tissue penetration capability of near-infrared light, this nanoprobe can achieve real-time in situ detection, thereby providing a novel technology for precise biological and medical analysis.

Recent Advances in Luminescence Imaging of Biological Systems Using Lanthanide(III) Luminescent Complexes

The use of luminescence in biological systems allows one to diagnose diseases and understand cellular processes. Molecular systems, particularly lanthanide(III) complexes, have emerged as an attractive system for application in cellular luminescence imaging due to their long emission lifetimes, high brightness, possibility of controlling the spectroscopic properties at the molecular level, and tailoring of the ligand structure that adds sensing and therapeutic capabilities. This review aims to provide a background in luminescence imaging and lanthanide spectroscopy and discuss selected examples from the recent literature on lanthanide(III) luminescent complexes in cellular luminescence imaging, published in the period 2016-2020. Finally, the challenges and future directions that are pointing for the development of compounds that are capable of executing multiple functions and the use of light in regions where tissues and cells have low absorption will be discussed.

A near-infrared upconversion luminescence total internal reflection platform for quantitative image analysis

A near-infrared upconversion luminescence total internal reflection platform was developed for quantitative image analysis of ClO⁻.