Bone-Inspired Mineralization with Highly Aligned Cellulose Nanofibers as Template

Three-Dimensional Hierarchical Cellulose Structures Based on Microbial Synthesis and Advanced Biofabrication

Cellulose is the most abundant and important biopolymer in our world, and it can also be biosynthesized by certain types of bacteria, such as Komagataeibacter xylinus. However, due to the requirement of oxygen access during such bacterial cellulose (BC) biosynthesis, as well as the high crystallinity and poor processability of BC, it is very challenging to fabricate 3D BC structures with well-defined shape, geometry, and internal structure. In recent years, the rapid progress of polymer additive manufacturing and biofabrication has provided new and versatile approaches for fabricating hierarchical 3D cellulose structures. This can be achieved by either incorporating BC in the 3D printing feedstock or, more interestingly, by incorporating cellulose-generating bacteria in a living ink followed by in situ BC biosynthesis. In this Perspective, we critically examine the potential of various advanced biofabrication technologies in fabricating hierarchical 3D cellulose structures, especially those based on integrating additive manufacturing with in situ microbial biosynthesis. Moreover, sustainable biocomposites based on BC and microbial biosynthesis are also discussed. The current challenges and future opportunities of microbial-biosynthesis-enabled 3D cellulose structures are highlighted. Their applications in tissue engineering, drug delivery, lightweight composites, thermal management, and energy storage are also discussed.

One-Pot Hybridization of Microfibrillated Cellulose and Hydroxyapatite as a Versatile Route to Eco-Friendly Mechanical Materials

Hydroxyapatite was crystallized in an alkaline dispersion of mechanically fibrillated cellulose to prepare their composites with hydroxyapatite contents of 26-86 wt %. The composite powder was uniaxially pressed at 120 °C and 300 MPa to obtain the compacts. Three-point bending tests revealed that the bending strengths of the compacts were 40-100 MPa, and the elastic moduli were 4-9 GPa. The composite containing 43% hydroxyapatite showed the largest bending strength and the largest work of fracture, and the composite containing 62% hydroxyapatite showed the largest elastic modulus. The composites, derived from the bioderived eco-friendly materials, showed the mechanical properties comparable to those of engineering plastics such as polyamide-6. Scanning electron microscopic observation of the fracture surface showed that the organic phase was discontinuous when the hydroxyapatite weight fraction was increased from 43% to 62%, and the compacts with a discontinuous organic phase lost toughness.

Organic-Inorganic Copolymerization Induced Oriented Crystallization for Robust Lightweight Porous Composite

Porous composites are important in engineering fields for their lightweight, thermal insulation, and mechanical properties. However, increased porosity commonly decreases the robustness, making a trade-off between mechanics and weight. Optimizing the strength of solid structure is a promising way to co-enhance the robustness and lightweight properties. Here, acrylamide and calcium phosphate ionic oligomers are copolymerized, revealing a pre-interaction of these precursors induced oriented crystallization of inorganic nanostructures during the linear polymerization of acrylamide, leading to the spontaneous formation of a bone-like nanostructure. The resulting solid phase shows enhanced mechanics, surpassing most biological materials. The bone-like nanostructure remains intact despite the introduction of porous structures at higher levels, resulting in a porous composite (P-APC) with high strength (yield strength of 10.5 MPa) and lightweight properties (density below 0.22 g cm-3). Notably, the density-strength property surpasses most reported porous materials. Additionally, P-APC shows ultralow thermal conductivity (45 mW m-1 k-1) due to its porous structure, making its strength and thermal insulation superior to many reported materials. This work provides a robust, lightweight, and thermal insulating composite for practical application. It emphasizes the advantage of prefunctionalization of ionic oligomers for organic-inorganic copolymerization in creating oriented nanostructure with toughened mechanics, offering an alternative strategy to produce robust lightweight materials.

Multi-Gradient Bone-Like Nanocomposites Induced by Strain Distribution

The heterogeneity of bones is elegantly adapted to the local strain environment, which is critical for maintaining mechanical functions. Such an adaptation enables the strong correlation between strain distributions and multiple gradients, underlying a promising pathway for creating complex gradient structures. However, this potential remains largely unexplored for the synthesis of functional gradient materials. In this work, heterogeneous bone-like nanocomposites with complex structural and compositional gradients comparable to bones are synthesized by inducing strain distributions within the polymer matrix containing amorphous calcium phosphate (ACP). Uniaxial stretching of composite films exerts the highest strain in the center, which ceases gradually toward the sides, resulting in the gradual decrease of polymer alignment and crystallinity. Simultaneously, the center with high orientation traps most ACP during stretching due to the nanoconfinement effect, which in turn promotes the formation of aligned nanofibrous structures. The sides experiencing the least strain have the smallest amounts of ACP, characteristic of porous architectures. Further crystallization of ACP produces oriented apatite nanorods in the center with a larger crystalline/amorphous ratio than the sides because of template-induced crystallization. The combination of structural and compositional gradients leads to gradient mechanical properties, and the gradient span and magnitude correlate nicely with strain distributions. Accompanying bone-like mechanical gradients, the center is less adhesive and self-healable than the sides, which allows a better recovery after a complete cutting. Our work may represent a general strategy for the synthesis of biomimetic materials with complex gradients thanks to the ubiquitous presence of strain distributions in load-bearing structures.

Biopolymer-Based Biomimetic Aerogel for Biomedical Applications

Aerogels are lightweight and highly porous materials that have been found to have great potential in biomedical research because of some of their unique properties, such as their high surface area, tunable porosity, and biocompatibility. Researchers have been exploring ways to use aerogels to create biomimetic scaffolds inspired by natural extracellular matrices (ECMs) for various biomedical applications. Aerogel scaffolds can serve as three-dimensional (3D) templates for cell growth and tissue regeneration, promoting wound healing and tissue repair. Additionally, aerogel-based scaffolds have great potential in controlled drug delivery systems, where their high surface area and porosity enable the efficient loading and release of therapeutic agents. In this review, we discuss biopolymer-based biomimetic aerogel scaffolds for tissue engineering, drug delivery, and biosensors. Finally, we also discuss the potential directions in the development of aerogel-based biomimetic scaffolds.

An antibacterial membrane based on Janus bacterial cellulose with nano-sized copper oxide through polydopamine conjugation for infectious wound healing

Bacterial cellulose (BC) produced by Acetobacter xylinum has great advantages in wound dressing. However, the structural limitation under static culture, and lack of antibacterial properties restrict its application, especially for infectious wound healing. The present study reported an original wound dressing, which was composed of a Janus BC membrane with antibacterial nano-sized copper oxide (CuO) through polydopamine (PDA) conjugation to promote wound healing under infectious condition. The finished product (CuO/PDA/BC membrane) exhibited favorable air permeability, high hydrophilicity and good mechanical properties, as well as strong antibacterial effects by the sustained release of CuO and photothermal effect of CuO/PDA. Furthermore, CuO/PDA/BC membrane inhibited inflammatory response and promoted wound healing in an infectious wound model in vivo. These results suggested that our CuO/PDA/BC membrane had great potential as wound dressing for infectious wound healing.

Construction of Mineralization Nanostructures in Polymers for Mechanical Enhancement and Functionalization

Mineralization capable of growing inorganic nanostructures efficiently, orderly, and spontaneously shows great potential for application in the construction of high-performance organic-inorganic composites. As a thermodynamically spontaneous solid-phase crystallization reaction involving dual organic and inorganic components, mineralization allows for the self-assembly of sophisticated and exclusive nanostructures within a polymer matrix. It results in a diversity of functions such as enhanced strength, toughness, electrical conductivity, selective permeability, and biocompatibility. While there are previous reviews discussing the progress of mineralization reactions, many of them overlook the significant benefits of interfacial regulation and functionalization that come from the incorporation of mineralized structures into polymers. Focusing on different means of assembly of mineralized nanostructures in polymer, the work analyzes their design principles and implementation strategies. Then, their different advantages and disadvantages are analyzed by combining nanostructures with organic substrates as well as involving the basis of different functionalizations. It is anticipated to provide insights and guidance for the future development of mineralized polymer composites and their application designs.

Designed Microbial Biosynthesis of Hierarchical Bone-Mimetic Biocomposites in 3D-Printed Soft Bioreactors

The creation of 3D biomimetic composite structures has important applications in tissue engineering, lightweight structures, drug delivery, and sensing. Previous approaches in fabricating 3D biomimetic composites have relied on blending or assembling chemically synthesized molecules or structures, making it challenging to achieve precise control of the size, geometry, and internal structure of the biomimetic composites. Here, we present a new approach for the creation of 3D bone-mimetic biocomposites with precisely controlled shape, hierarchical structure, and functionalities. Our approach is based on the integration of programmable microbial biosynthesis with 3D printing of gas-permeable and customizable bioreactors. The organic and inorganic components are bacterial cellulose and calcium hydroxyapatite via a mineral precursor, which are generated by Komagataeibacter xylinus and Bacillus simplex P6A, respectively, in 3D-printed silicone bioreactors in consecutive culturing cycles. This study is of high significance to biocomposites, biofabrication, and tissue engineering as it paves the way for the synergistic integration of microbial biosynthesis and additive manufacturing.

Aligned Collagen Sponges with Tunable Pore Size for Skeletal Muscle Tissue Regeneration

Volumetric muscle loss (VML) is a traumatic injury where at least 20% of the mass of a skeletal muscle has been destroyed and functionality is lost. The standard treatment for VML, autologous tissue transfer, is limited as approximately 1 in 10 grafts fail because of necrosis or infection. Tissue engineering strategies seek to develop scaffolds that can regenerate injured muscles and restore functionality. Many of these scaffolds, however, are limited in their ability to restore muscle functionality because of an inability to promote the alignment of regenerating myofibers. For aligned myofibers to form on a scaffold, myoblasts infiltrate the scaffold and receive topographical cues to direct targeted myofiber growth. We seek to determine the optimal pore size for myoblast infiltration and differentiation. We developed a method of tuning the pore size within collagen scaffolds while inducing longitudinal alignment of these pores. Significantly different pore sizes were generated by adjusting the freezing rate of the scaffolds. Scaffolds frozen at -20 °C contained the largest pores. These scaffolds promoted the greatest level of cell infiltration and orientation in the direction of pore alignment. Further research will be conducted to induce higher levels of myofiber formation, to ultimately create an off-the-shelf treatment for VML injuries.

Biomimetic Mineralization: From Microscopic to Macroscopic Materials and Their Biomedical Applications

Biomineralization is an attractive pathway to produce mineral-based biomaterials with high performance and hierarchical structures. To date, the biomineralization process and mechanism have been extensively studied, especially for the formation of bone, teeth, and nacre. Inspired by those, abundant biomimetic mineralized materials have been fabricated for biomedical applications. Those bioinspired materials generally exhibit great mechanical properties and biological functions. Nevertheless, substantial gaps remain between biomimetic materials and natural materials, particularly with respect to mechanical properties and mutiscale structures. This Review summarizes the recent progress of micro- and macroscopic biomimetic mineralization from the perspective of materials synthesis and biomedical applications. To begin with, we discuss the progress of biomimetic mineralization at the microscopic level. The mechanical strength, stability, and functionality of the nano- and micromaterials are significantly improved by introducing biominerals, such as DNA nanostructures, nanovaccines, and living cells. Next, numerous biomimetic strategies based on biomineralization at the macroscopic scale are highlighted, including in situ mineralization and bottom-up assembly of mineralized building blocks. Finally, challenges and future perspectives regarding the development of biomimetic mineralization are also presented with the aim of offering insights for the rational design and fabrication of next-generation biomimetic mineralized materials.

Application of Nanocellulose-Based Aerogels in Bone Tissue Engineering: Current Trends and Outlooks

The complex or compromised bone defects caused by osteomyelitis, malignant tumors, metastatic tumors, skeletal abnormalities, and systemic diseases are difficult to be self-repaired, leading to a non-union fracture. With the increasing demands of bone transplantation, more and more attention has been paid to artificial bone substitutes. As biopolymer-based aerogel materials, nanocellulose aerogels have been widely utilized in bone tissue engineering. More importantly, nanocellulose aerogels not only mimic the structure of the extracellular matrix but could also deliver drugs and bioactive molecules to promote tissue healing and growth. Here, we reviewed the most recent literature about nanocellulose-based aerogels, summarized the preparation, modification, composite fabrication, and applications of nanocellulose-based aerogels in bone tissue engineering, as well as giving special focus to the current limitations and future opportunities of nanocellulose aerogels for bone tissue engineering.

Bone ECM-inspired biomineralization chitin whisker liquid crystal hydrogels for bone regeneration

As a particular cell niche, natural bone extracellular matrix (ECM) is an organic-inorganic composite material formed by mineralization of liquid crystal (LC) collagen fiber network. However, designing bone repair materials that highly imitate the LC characteristic and composite components of natural bone ECM is a great challenge. Here, we report a novel kind of bone ECM-inspired biomineralization chitin whisker LC hydrogels. First, photocurable chitin whisker LC hydrogels with bone ECM-like chiral nematic LC state and viscoelasticity are created. Next, biomineralization, guided by LC hydrogels, is carried out to truly mimic the mineralization process of natural bone, so as to obtain the organic-inorganic composite materials with bone ECM-like microenvironment. The chitin whisker LC hydrogels exhibit superior biomineralization, protein adsorption and osteogenesis ability, more importantly, LC hydrogel with negatively charged -COOH groups is more conducive to biomineralization and shows more desirable osteogenic activity than that with positively charged -NH₂ groups. Notably, compared with the pristine LC hydrogels, the biomineralization LC hydrogels display more favorable osteogenesis ability due to their bone ECM-like LC texture and bone-like hydroxyapatite. This study opens an avenue toward the design of bone ECM-inspired biomineralization chitin whisker LC hydrogels for bone regeneration.

Organized mineralized cellulose nanostructures for biomedical applications

Cellulose is the most abundant naturally-occurring polymer, and possesses a one-dimensional (1D) anisotropic crystalline nanostructure with outstanding mechanical robustness, biocompatibility, renewability and rich surface chemistry in the form of nanocellulose in nature. Such features make cellulose an ideal bio-template for directing the bio-inspired mineralization of inorganic components into hierarchical nanostructures that are promising in biomedical applications. In this review, we will summarize the chemistry and nanostructure characteristics of cellulose and discuss how these favorable characteristics regulate the bio-inspired mineralization process for manufacturing the desired nanostructured bio-composites. We will focus on uncovering the design and manipulation principles of local chemical compositions/constituents and structural arrangement, distribution, dimensions, nanoconfinement and alignment of bio-inspired mineralization over multiple length-scales. In the end, we will underline how these cellulose biomineralized composites benefit biomedical applications. It is expected that this deep understanding of design and fabrication principles will enable construction of outstanding structural and functional cellulose/inorganic composites for more challenging biomedical applications.

Biomineralization of bone-like hydroxyapatite to upgrade the mechanical and osteoblastic performances of poly(lactic acid) scaffolds

Biomimetic mineralization of high-strength apatite structure essentially relies on mimicking the inorganic building blocks of naturally occurring bones. However, conventional routes still have substantial function gaps in providing precision control over the geometrical dimensions and crystalline morphology of biomineralized apatite. Herein, we conceived the concept of microwave-assisted biomineralization (MAB) to customize 1D hydroxyapatite nanowhiskers (HANWs) at graphene templates, rendering the formation of graphene-hydroxyapatite (Gr-HA) nanohybrids. The HANWs essentially resembled bone apatite in elemental composition (Ca/P = 1.74), diameter (~20 nm), crystallinity (63 %), and rodlike geometry (aspect ratio of ~6). The Gr-HA nanohybrids were uniformly incorporated into poly(lactic acid) (PLA) microfibers (~1 μm) by electrospinning, engendering fibrous membranes with a set of Gr-HA loadings (10, 20 and 30 wt%). Intimate interactions were generated between Gr-HA and PLA matrix, contributing to significant promotion of the mechanical properties for PLA composite membranes. For example, the yield strength and elastic modulus of the PLA composite membranes loaded with 30 wt% Gr-HA achieved 5.4 and 66.4 MPa, increasing nearly 182 % and over 94 % compared to those of pure PLA, respectively. Moreover, the bone-like HANWs endowed PLA membranes with excellent cytocompatibility and good bioactivity, as demonstrated by over 38 % increase in cell viability and rapid apatite formation in mineral solution. The impressive combination of mechanical properties and biological characteristics make the PLA/Gr-HA scaffolds promising for guided tissue/bone regeneration therapy.

Tooth Diversity Underpins Future Biomimetic Replications

Although the evolution of tooth structure seems highly conserved, remarkable diversity exists among species due to different living environments and survival requirements. Along with the conservation, this diversity of evolution allows for the optimized structures and functions of teeth under various service conditions, providing valuable resources for the rational design of biomimetic materials. In this review, we survey the current knowledge about teeth from representative mammals and aquatic animals, including human teeth, herbivore and carnivore teeth, shark teeth, calcite teeth in sea urchins, magnetite teeth in chitons, and transparent teeth in dragonfish, to name a few. The highlight of tooth diversity in terms of compositions, structures, properties, and functions may stimulate further efforts in the synthesis of tooth-inspired materials with enhanced mechanical performance and broader property sets. The state-of-the-art syntheses of enamel mimetics and their properties are briefly covered. We envision that future development in this field will need to take the advantage of both conservation and diversity of teeth. Our own view on the opportunities and key challenges in this pathway is presented with a focus on the hierarchical and gradient structures, multifunctional design, and precise and scalable synthesis.

An injectable and self-healing cellulose nanofiber-reinforced alginate hydrogel for bone repair

Biomedical materials are in high demand for transplantation in cases of diseased or damaged bone tissue. Hydrogels are potential candidates for bone defect repair; however, traditional hydrogels lack the necessary strength and multiple functions. Herein, we effectively synthesized a cellulose nanofiber (CNF)-reinforced oxidized alginate (OSA)/gelatin (Gel) semi-interpenetrating network hydrogel through a facile one-step approach without a cross-linker by using the synergistic effects of dynamic imine bonds and hydrogen bonds. The OSA/Gel/CNF sample showed a notable compressive modulus (up to 361.3 KPa). The gelation time (~150 s) ensured excellent injectability. Self-healing exhibited a high efficiency of up to 92 %, which would enable minimally invasive, dynamic adjustments and personalized therapies. Furthermore, the OSA/Gel/CNF hydrogel showed excellent biomineralization (Ca/P ratio ~ 1.69) and enhanced preosteoblast cell (MC3T3-E1) viability (over 96 %), proliferation, and osteogenic differentiation. Thus, this multifunctional hydrogel has promising potential for using in the bone tissue repairs.

Recent Advances in Designing Fibrous Biomaterials for the Domain of Biomedical, Clinical, and Environmental Applications

Unique properties and potential applications of nanofibers have emerged as innovative approaches and opportunities in the biomedical, healthcare, environmental, and biosensor fields. Electrospinning and centrifugal spinning strategies have gained considerable attention among all kinds of strategies to produce nanofibers. These techniques produce nanofibers with high porosity and surface area, adequate pore architecture, and diverse chemical compositions. The extraordinary characteristics of nanofibers have unveiled new gates in nanomedicine to establish innovative fiber-based formulations for biomedical use, healthcare, and a wide range of other applications. The present review aims to provide a comprehensive overview of nanofibers and their broad range of applications, including drug delivery, biomedical scaffolds, tissue/bone-tissue engineering, dental applications, and environmental remediation in a single place. The review begins with a brief introduction followed by potential applications of nanofibers. Finally, the future perspectives and current challenges of nanofibers are demonstrated. This review will help researchers to engineer more efficient multifunctional nanofibers with improved characteristics for their effective use in broad areas. We strongly believe this review is a reader's delight and will help in dealing with the fundamental principles and applications of nanofiber-based scaffolds. This review will assist students and a broad range of scientific communities to understand the significance of nanofibers in several domains of nanotechnology, nanomedicine, biotechnology, and environmental remediation, which will set a benchmark for further research.

Engineering DNA-Guided Hydroxyapatite Bulk Materials with High Stiffness and Outstanding Antimicrobial Ability for Dental Inlay Applications

Programmable base pair interactions at the nanoscale make DNA an attractive scaffold for forming hydroxyapatite (HAP) nanostructures. However, engineering macroscale HAP mineralization guided by DNA molecules remains challenging. To overcome this issue, a facile strategy is developed for the fabrication of ultrastiff DNA-HAP bulk composites. The electrostatic complexation of DNA and a surfactant with a quaternary ammonium salt group enables the formation of long-range ordered scaffolds using electrospinning. The growth of 1D and 2D HAP minerals is thus realized by this DNA template at a macroscale. Remarkably, the as-prepared DNA-HAP composites exhibit an ultrahigh Young's modulus of ≈25 GPa, which is comparable to natural HAP and superior to most artificial mineralized composites. Furthermore, a new type of dental inlay with outstanding antibacterial properties is developed using the stiff DNA-HAP. The encapsulated quaternary ammonium group within the dense HAP endows the composite with long-lasting and local antibacterial activity. Therefore, this new type of super-stiff biomaterial holds great potential for oral prosthetic applications.

Hierarchical porous bacterial cellulose scaffolds with natural biomimetic nanofibrous structure and a cartilage tissue-specific microenvironment for cartilage regeneration and repair

The limited three-dimensional (3D) nano-scale pore structure and lack of biological function hamper the application of bacterial cellulose (BC) in cartilage tissue engineering. To address this challenge, 3D hierarchical porous BC/decellularized cartilage extracellular matrix (DCECM) scaffolds with structurally and biochemically biomimetic cartilage regeneration microenvironment were fabricated by freeze-drying technique after EDC/NHS chemical crosslinking. The BC/DCECM scaffolds exhibited excellent mechanical properties, water superabsorbency and shape-memory properties. Compared with the BC control, the BC/DCECM scaffolds exhibited enhanced cell adhesion and proliferation. Cartilage regeneration in vitro and in vivo indicated that the BC/DCECM scaffolds achieved satisfactory neocartilage tissue regeneration with superior original shape fidelity, exterior natural cartilage-like appearance and histologically cartilage-specific lacuna formation and ECM deposition. Furthermore, the BC/DCECM scaffolds achieved superior repair outcomes, as hyaline cartilage-like tissue formed within the defect sites. The present study constitutes a strong step toward the further application of BC in cartilage tissue engineering.

Oxidized bacterial cellulose reinforced nanocomposite scaffolds for bone repair

Bone tissue engineering has been widely used in promoting the repair and regeneration of bone defects. Tissue-engineered bone scaffolds can simulate the extracellular matrix environment and induce the proliferation and differentiation of osteoblasts. The first issues to be considered when constructing bone repair scaffolds include biocompatibility, stress resistance, degradability and stability. Here, a low-cost manufacturing introduces a new bone repair composite scaffold (CS/OBC/nHAP). The scaffolds were composed of only natural derived components, including nano hydroxyapatite (nHAP) formed by in-situ crystallization of Ca²⁺/PO₄^2- solution and evenly dispersed in oxidized bacterial cellulose (OBC) and chitosan (CS) scaffolds. The experimental results showed that compared with CS/nHAP scaffold, CS/OBC/nHAP scaffold has significantly improve mechanical properties and water retention performance, and has a more stable degradation rate. Cell experiments showed that the CS/OBC/nHAP scaffold has good biocompatibility and significantly promote the proliferation of MC3T3-E1 cells. The rat skull defect model further proves that the CS/OBC/nHAP scaffold could induce the formation of bone tissue. Meanwhile, H&E staining experiment show that the CS/OBC/nHAP scaffold has good stability in vivo and could better promote the formation of bone tissue.

Bacterial cellulose-based composites for biomedical and cosmetic applications: Research progress and existing products

Bacterial cellulose (BC) is a promising unique material for various biomedical and cosmetic applications due to its morphology, mechanical strength, high purity, high water uptake, non-toxicity, chemical controllability, and biocompatibility. Today, extensive investigation is into the manufacturing of BC-based composites with other components such as nanoparticles, synthetic polymers, natural polymers, carbon materials, and biomolecules, which will allow the development of a wide range of biomedical and cosmetic products. Moreover, the addition of different reinforcement substances into BC and the organized arrangement of BC nano-fibers have proven a promising improvement in their properties for biomedical applications. This review paper highlights the progress in synthesizing BC-based composites and their applications in biomedical fields, such as wound healing, drug delivery, tissue engineering, and cancer treatment. It emphasizes high-performance BC-based materials and cosmetic applications. Furthermore, it presents challenges yet to be defeated and future possibilities for BC-based composites for biomedical and cosmetic applications.

Mechanistically Scoping Cell-Free and Cell-Dependent Artificial Scaffolds in Rebuilding Skeletal and Dental Hard Tissues

Rebuilding mineralized tissues in skeletal and dental systems remains costly and challenging. Despite numerous demands and heavy clinical burden over the world, sources of autografts, allografts, and xenografts are far limited, along with massive risks including viral infections, ethic crisis, and so on. Per such dilemma, artificial scaffolds have emerged to provide efficient alternatives. To date, cell-free biomimetic mineralization (BM) and cell-dependent scaffolds have both demonstrated promising capabilities of regenerating mineralized tissues. However, BM and cell-dependent scaffolds have distinctive mechanisms for mineral genesis, which makes them methodically, synthetically, and functionally disparate. Herein, these two strategies in regenerative dentistry and orthopedics are systematically summarized at the level of mechanisms. For BM, methodological and theoretical advances are focused upon; and meanwhile, for cell-dependent scaffolds, it is demonstrated how scaffolds orchestrate osteogenic cell fate. The summary of the experimental advances and clinical progress will endow researchers with mechanistic understandings of artificial scaffolds in rebuilding hard tissues, by which better clinical choices and research directions may be approached.

Effects of nanofibers on mesenchymal stem cells: environmental factors affecting cell adhesion and osteogenic differentiation and their mechanisms

Nanofibers can mimic natural tissue structure by creating a more suitable environment for cells to grow, prompting a wide application of nanofiber materials. In this review, we include relevant studies and characterize the effect of nanofibers on mesenchymal stem cells, as well as factors that affect cell adhesion and osteogenic differentiation. We hypothesize that the process of bone regeneration in vitro is similar to bone formation and healing in vivo, and the closer nanofibers or nanofibrous scaffolds are to natural bone tissue, the better the bone regeneration process will be. In general, cells cultured on nanofibers have a similar gene expression pattern and osteogenic behavior as cells induced by osteogenic supplements in vitro. Genes involved in cell adhesion (focal adhesion kinase (FAK)), cytoskeletal organization, and osteogenic pathways (transforming growth factor-β (TGF-β)/bone morphogenic protein (BMP), mitogen-activated protein kinase (MAPK), and Wnt) are upregulated successively. Cell adhesion and osteogenesis may be influenced by several factors. Nanofibers possess certain physical properties including favorable hydrophilicity, porosity, and swelling properties that promote cell adhesion and growth. Moreover, nanofiber stiffness plays a vital role in cell fate, as cell recruitment for osteogenesis tends to be better on stiffer scaffolds, with associated signaling pathways of integrin and Yes-associated protein (YAP)/transcriptional co-activator with PDZ-binding motif (TAZ). Also, hierarchically aligned nanofibers, as well as their combination with functional additives (growth factors, HA particles, etc.), contribute to osteogenesis and bone regeneration. In summary, previous studies have indicated that upon sensing the stiffness of the nanofibrous environment as well as its other characteristics, stem cells change their shape and tension accordingly, regulating downstream pathways followed by adhesion to nanofibers to contribute to osteogenesis. However, additional experiments are needed to identify major signaling pathways in the bone regeneration process, and also to fully investigate its supportive role in fabricating or designing the optimum tissue-mimicking nanofibrous scaffolds.

A review of functionalised bacterial cellulose for targeted biomedical fields

Bacterial cellulose (BC), which can be produced by microorganisms, is an ideal biomaterial especially for tissue engineering and drug delivery systems thanks to its properties of high purity, biocompatibility, high mechanical strength, high crystallinity, 3 D nanofiber structure, porosity and high-water holding capacity. Therefore, wide ranges of researches have been done on the BC production process and its structural and physical modifications to make it more suitable for certain targeted biomedical applications thoroughly. BC's properties such as mechanical strength, pore diameter and porosity can be tuned in situ or ex situ processes by using various polymer and compounds. Besides, different organic or inorganic compounds that support cell attachment, proliferation and differentiation or provide functions such as antimicrobial effectiveness can be gained to its structure for targeted application. These processes not only increase the usage options of BC but also provide success for mimicking the natural tissue microenvironment, especially in tissue engineering applications. In this review article, the studies on optimisation of BC production in the last decade and the BC modification and functionalisation studies conducted for the three main perspectives as tissue engineering, drug delivery and wound dressing with diverse approaches are summarized.

Recent Progress on Nanocellulose Aerogels: Preparation, Modification, Composite Fabrication, Applications

The rapid development of modern industry and excessive consumption of petroleum-based polymers have triggered a double crisis presenting a shortage of nonrenewable resources and environmental pollution. However, this has provided an opportunity to stimulate researchers to harness native biobased materials for novel advanced materials and applications. Nanocellulose-based aerogels, using abundant and sustainable cellulose as raw material, present a third-generation of aerogels that combine traditional aerogels with high porosity and large specific surface area, as well as the excellent properties of cellulose itself. Currently, nanocellulose aerogels provide a highly attention-catching platform for a wide range of functional applications in various fields, e.g., adsorption, separation, energy storage, thermal insulation, electromagnetic interference shielding, and biomedical applications. Here, the preparation methods, modification strategies, composite fabrications, and further applications of nanocellulose aerogels are summarized, with additional discussions regarding the prospects and potential challenges in future development.

Harnessing biomolecules for bioinspired dental biomaterials

Dental clinicians have relied for centuries on traditional dental materials (polymers, ceramics, metals, and composites) to restore oral health and function to patients. Clinical outcomes for many crucial dental therapies remain poor despite many decades of intense research on these materials. Recent attention has been paid to biomolecules as a chassis for engineered preventive, restorative, and regenerative approaches in dentistry. Indeed, biomolecules represent a uniquely versatile and precise tool to enable the design and development of bioinspired multifunctional dental materials to spur advancements in dentistry. In this review, we survey the range of biomolecules that have been used across dental biomaterials. Our particular focus is on the key biological activity imparted by each biomolecule toward prevention of dental and oral diseases as well as restoration of oral health. Additional emphasis is placed on the structure-function relationships between biomolecules and their biological activity, the unique challenges of each clinical condition, limitations of conventional therapies, and the advantages of each class of biomolecule for said challenge. Biomaterials for bone regeneration are not reviewed as numerous existing reviews on the topic have been recently published. We conclude our narrative review with an outlook on the future of biomolecules in dental biomaterials and potential avenues of innovation for biomaterial-based patient oral care.

Highly Mineralized Biomimetic Polysaccharide Nanofiber Materials Using Enzymatic Mineralization

Many biological high-performance composites, such as bone, antler, and crustacean cuticles, are composed of densely mineralized and ordered nanofiber materials. The mimicry of even simplistic bioinspired structures, i.e., of densely and homogeneously mineralized nanofibrillar materials with controllable mechanical performance, continues to be a grand challenge. Here, using alkaline phosphatase as an enzymatic catalyst, we demonstrate the dense, homogeneous, and spatially controlled mineralization of calcium phosphate nanostructures within networks of anionically charged cellulose nanofibrils (CNFs) and cationically charged chitin nanofibrils (ChNFs)-both emerging biobased nanoscale building blocks for sustainable high-performance materials design. Our study reveals that anionic CNFs lead to a more homogeneous nanoscale mineralization with very high mineral contents up to ca. 70 wt % with a transition from amorphous to crystalline deposits, while cationic ChNFs yield rod-like crystalline morphologies. The bone-inspired CNF bulk films exhibit a significantly increased stiffness, maintain good flexibility and translucency, and have a significant gain in wet state mechanical properties. The mechanical properties can be tuned both by the enzyme concentration and the mineralization time. Moreover, we also show a spatial control of the mineralization using kinetically controlled substrate uptake in a dialysis reactor, and by spatially selectively incorporating the enzyme into 2D printed filament patterns. The strategy highlights possibilities for spatial encoding of enzymes in tailored structures and patterns and programmed mineralization processes, promoting the potential application of mineralized CNF biomaterials with complex gradients for bone substitutes and tissue regeneration in general.