Paper-like Foldable Nanowave Circuit with Ultralarge Curvature and Ultrahigh Stability

Dual cross-linked cellulose-based hydrogel for dendrites-inhibited flexible zinc-ion energy storage devices with ultra-long cycles and high energy density

Hydrogel electrolytes, renowned for their mechanical robustness and versatility, are crucial in ensuring stable energy output in flexible energy storage devices. This work presents a dual cross-linked cellulose-based hydrogel electrolyte with chemical cross-linking from covalent bonding and physical cross-linking from hydrogen bonding. This electrolyte demonstrated outstanding mechanical strength and porous structure with abundant hydroxyl groups, which facilitates the migration of Zn2+ and suppresses the formation of undesirable zinc dendrite, thereby enhancing the ion conductivity (18.46 ± 0.39 mS cm-1 at room temperature) and extending electrochemical stability window (0-2.23 V). Zn||Zn symmetric cells based on this electrolyte demonstrated stable stripping/plating cycles of 3000 h at a current density of 1 mA cm-2. Furthermore, the corresponding flexible zinc-ion hybrid capacitor retains a 90.3 % capacity over 100,000 cycles at 10 A g-1, while remaining functional across various folding angles. Hence, this biomass-derived hydrogel electrolyte holds promise for flexible energy storage device applications.

Kill Two Birds with One Stone: Cracking Lithography Technology for High-Performance Flexible Metallic Network Transparent Conductors and Metallic Micronano Sheets

Flexible electronics have sparked a wide range of exciting applications, such as flexible display technologies, lighting, sensing, etc. Flexible conductors are essential components of flexible electronics and seriously affect efficiency and overall performance. Here, a facile and kill-two-birds-with-one-stone strategy of cracking lithography technology has been proposed to simultaneously fabricate two high-performance flexible conductors, flexible metallic network transparent conductors (f-NTCs) and metallic micronano sheets (MMNSs). The PET substrate flexible transparent conductors (FTCs) based on this strategy yield 88.1% transparency within the visible spectrum and a sheet resistance of 9 Ω/sq. In addition, the FTCs show exceptional mechanical stability, with the sheet resistance remaining virtually unchanged even after 6000 s of bending tests. Subsequently, the remaining MMNSs are recycled to manufacture a Ag paste, showing a very low conductive percolation threshold (∼13%) and excellent flexibility with 140% breaking elongation. After 1000 s of stretching tests, it showed excellent mechanical stability. Furthermore, flexible electroluminescent devices based on the FTCs and sensors fabricated with MMNSs both show excellent performance, demonstrating their potential wide applications in flexible electronics.

Direct-Writing Flexible Metal Circuit with Polymer/Metal Precursor Ink and Interfacial Reaction

In this study, flexible metal circuits are fabricated with polymer/metal precursor ink and an interfacial reaction by direct-writing technology. Poly(vinyl alcohol) (PVA) is selected as one component of ink, which could be a flexible composite in a metal circuit and an adhesive layer to connect the flexible metal circuit with the flexible substrate. Silver nitrate (AgNO₃) is added to the ink as a source of metal. After the direct-writing structure was placed in contact with an ascorbic acid (VC) aqueous solution with an adjustable process, silver nanoparticles (AgNPs) with 100-400 nm uniform size could be generated on the direct-writing PVA skeleton. The resistivity of the composite silver layer could reach 10^-6 Ω·m without any postprocessing. Meanwhile, the resistance change could keep within 20% with 180° bending after 10 000 repeat times. Patterned flexible metal circuits could be facilely fabricated by direct-writing technology, which presented excellent electrical conductivity and flexibility.

High-Performance and Reliable Silver Nanotube Networks for Efficient and Large-Scale Transparent Electromagnetic Interference Shielding

The development of flexible and transparent electromagnetic interference (EMI) shielding materials with excellent comprehensive properties is urgently demanded as visual windows and display devices in aeronautic, industry, medical, and research facilities. However, the method of how to obtain highly efficient and reliable transparent EMI shielding devices is still facing lots of obstacles. Here, a high-performance silver nanotube (AgNT) network with stable and integrated interconnects is prepared by physical depositing technology, based on a uniform and large-scale nanofiber skeleton. This unique structure enables the AgNT network to achieve one order higher conductivity (∼1.0 Ω/sq at >90% transmittance) than previous research studies and keeps <10% variation with random deformations (>5000 times). Moreover, the manufactured AgNT shielding film with a thickness of less than 1 mm can be easily transferred to arbitrary surfaces as a transparent and flexible EMI shielding film at commercial ∼35 dB EMI shielding effectiveness, with large-scale, low-cost, and simple preparation processes. These excellent properties endow the AgNT shielding film to achieve great potential for future flexible and transparent scenarios.

Single-Layer MoS2 Mechanical Resonant Piezo-Sensors with High Mass Sensitivity

Thin-film resonators and scanning probe microscopies (SPM) are usually used on low-frequency mechanical systems at the nanoscale or larger. Generally, off-chip approaches are applied to detect mechanical vibrations in these systems, but these methods are not much appropriate for atomic-thin-layer devices with ultrahigh characteristic frequencies and ultrathin thickness. Primarily, those mechanical devices based on atomic-layers provide highly improved properties, which are inapproachable with conventional nanoelectromechanical systems (NEMS). In this report, the assembly and manipulation of single-atomic-layer piezo-resonators as mass sensors with eigen mechanical resonances up to gigahertz are described. The resonators utilize electronic vibration transducers based on piezo-electric polarization charges, allowing direct and optimal atomic-layer sensor exports. This direct detection affords practical applications with the previously inapproachable Q-factor and sensitivity rather than photoelectric conversion. Exploration of a 2406.26 MHz membrane vibration is indicated with a thermo-noise-limited mass resolution of ∼3.0 zg (10^-21 g) in room temperature. The fabricated mass sensors are contactless and fast and can afford a method for precision measurements of the ultrasmall mass with two-dimentional materials.

Ultrafast Photoinduced Interconnection of Metal-Polymer Composites for Fabrication of Transparent and Stretchable Electronic Skins

The high interest sparked by the foldable smartphones recently released on the market is gradually shifting to the next generation of flexible electronic devices, such as electronic skins in the form of stretchable thin films. To develop such devices, good mechanical flexibility of all components (including the substrate, electrode, and encapsulant) is critical. Various technologies have been developed to enhance the flexibility of these components; however, progress in developing interconnection methods for flexible and stretchable devices has been limited. Here, we developed an ultrafast photoinduced interconnection method that does not require any adhesive or surface treatment. This method is based on heating metal nanostructures using intense pulsed light (IPL) and the reversible cross-linking of polymers. First, we synthesized a stretchable, transparent, and free-standing polymer substrate that can be reversibly cross-linked, and then Ag nanowire (AgNW) networks were formed on its surface. This electrode was irradiated with IPL, which locally heated the AgNWs, followed by decomposition of the polymer via the retro-Diels-Alder reaction and recross-linking. Independently fabricated AgNW/polymer films were layered and irradiated three times with IPL to form a bonded sample with excellent joint quality and no increase in electrical resistance compared to a single electrode. Furthermore, the interconnected electrodes were stretchable and optically transparent. Even when more than 200% strain was applied in a peel test, no breakage at the joint was observed. This allowed us to successfully produce a stretchable, transparent, and bending-insensitive pressure sensor for various applications such as motion detectors or pressure sensor arrays.