Iron Magnetic Nanoparticle-Induced ROS Generation from Catechol-Containing Microgel for Environmental and Biomedical Applications

A Novel Curcumin-Loaded Nanoplatform Alleviates Osteoarthritis by Inhibiting Chondrocyte Ferroptosis

Osteoarthritis (OA) is a chronic degenerative joint disease characterized by the degradation of articular cartilage. Recent studies have demonstrated that chondrocyte ferroptosis plays a crucial role in the progression of OA. Consequently, developing nanomedicines that suppress chondrocyte ferroptosis is a promising strategy for OA treatment. However, there are few reports on nanomedicines specifically targeting chondrocyte ferroptosis for OA therapy. In this study, Curcumin-loaded nanoparticles (Cur-NPs) are fabricated to suppress chondrocyte ferroptosis by regulating reactive oxygen species (ROS), ferrous ion (Fe2⁺), and Acyl-CoA Synthetase Long-Chain Family Member 4 (ACSL4) levels of chondrocyte. This is achieved by combining the functions of curcumin and an amphiphilic block copolymer with ROS scavenging and iron-chelating properties. The in vitro anti-ferroptotic effects of Cur-NPs are thoroughly investigated. The findings indicate that Cur-NPs decrease the expression of ferroptosis markers such as ROS, Fe2⁺, and ACSL4, while protecting the mitochondrial membrane potential of chondrocytes. Additionally, Cur-NPs attenuated lipid peroxidation in chondrocytes. Furthermore, Cur-NPs significantly reduced the expression of the catabolic factor Matrix Metallopeptidase 13 (MMP13) and increased the expression of the anabolic factor Collagen type II (Col II) in vitro. This study demonstrates that Cur-NPs exhibit enhanced chondroprotective effects through anti-ferroptotic actions, presenting a promising approach for inhibiting chondrocyte ferroptosis using bioactive nanomaterials in OA treatment.

Accelerated dermal wound healing in diabetic mice by a H2O2-generating catechol-functionalized gelatin microgel

Physically crosslinked gelatin microgels were functionalized with a bioadhesive molecule, catechol, to study the effect of in situ generated H2O2 on full-thickness wound repair in diabetic mice. Due to the physically crosslinked nature of the microgels, they transition into a hydrogel film upon hydration. The formation of a hydrogel film was confirmed by the changes in their morphology and viscoelastic properties. Additionally, these microgels released up to 86 μM of H2O2 as a result of catechol autoxidation. The generated H2O2 completely eradicated Staphylococcus epidermidis with an initial concentration of 103 CFU mL-1. These microgels were not cytotoxic and promoted VEGF upregulation in immortalized human keratinocytes (HaCaT) in vitro. When the microgels were applied to a full-thickness dermal wound in diabetic mice, dermal wound closure was accelerated over 14 days, achieving a wound closure of 90% based on the wound area. Microgel-treated wounds also resulted in complete re-epithelialization and regeneration of new dermal tissues with morphology and structure resembling those of native tissues. These results indicate that the release of micromolar concentrations of H2O2 can accelerate wound healing in a healing-impaired animal.

Molecular Determinants of Optical Modulation in ssDNA-Carbon Nanotube Biosensors

Most traditional optical biosensors operate through molecular recognition, where ligand binding causes conformational changes that lead to optical perturbations in the emitting motif. Optical sensors developed from single-stranded DNA-functionalized single-walled carbon nanotubes (ssDNA-SWCNTs) have started to make useful contributions to biological research. However, the mechanisms underlying their function have remained poorly understood. In this study, we combine experimental and computational approaches to show that ligand binding alone is not sufficient for optical modulation in this class of synthetic biosensors. Instead, the optical response that occurs after ligand binding is highly dependent on the chemical properties of the ligands, resembling mechanisms seen in activity-based biosensors. Specifically, we show that in ssDNA-SWCNT catecholamine sensors, the optical response correlates positively with the electron density on the aryl motif, even among ligands with similar ligand binding affinities. Importantly, despite the strong correlations with electrochemical properties, we find that catechol oxidation itself is not necessary to drive the sensor optical response. We discuss how these findings could serve as a framework for tuning the performance of existing sensors and guiding the development of new biosensors of this class.

Enhancing Tannic Acid-Arginine Complex Loading in Ultraporous PA6 Nanofibers through NH3 Foaming for Efficient Heavy Metal Removal from Textile Wastewater

Metal-containing dyes in the textile industry release heavy metal ions into wastewater, posing significant environmental risks and complicating treatment processes. Among various removal methods, chemical adsorption through functional groups that form stable complexes is one of the most effective. Tannic acid (TA), renowned for its strong chelation of metal ions via phenolic hydroxyl groups, faces challenges in operation and recycling in its powdered form. Electrospun polyamide 6 (PA6) nanofiber membranes, characterized by high surface area and structural stability, offer a promising platform. However, achieving an optimal TA loading remains a technical hurdle for industrial applications. To address this, we developed an arginine (l-Arg) bridging strategy to enhance the TA loading on PA6 nanofibers. Additionally, we implemented an NH3 escape foaming technique to increase membrane porosity by 20% and quadruple pore size, enhancing surface roughness and resulting in a 70% increase in TA loading. The optimized adsorbent demonstrated the effective removal of various heavy metal ions, achieving over 95% removal efficiency for five different metals. Even after five adsorption-desorption cycles, the membrane retained over 92% efficiency, translating to a treatment capacity of 12.5 tons of wastewater per kilogram of foaming fiber, underscoring its potential for practical wastewater treatment applications.

Bioinspired Asymmetric-Adhesion Janus Hydrogel Patch Regulating by Zwitterionic Polymers for Wet Tissues Adhesion and Postoperative Adhesion Prevention

Asymmetrically adhesive hydrogel patch with robust wet tissue adhesion simultaneously anti-postoperative adhesion is essential for clinical applications in internal soft-tissue repair and postoperative anti-adhesion. Herein, inspired by the lubricative role of serosa and the underwater adhesion mechanism of mussels, an asymmetrically adhesive hydrogel Janus patch is developed with adhesion layer (AL) and anti-adhesion layer (anti-AL) through an in situ step-by-step polymerization process in the mold. The AL exhibits excellent adhesion to internal soft-tissues. In contrast, the anti-AL demonstrated ultralow fouling property against protein and fibroblasts, which hinders the early and advanced stages of development of the adhesion. Moreover, the Janus patch simultaneously promotes tissue regeneration via ROS clearance capability of catechol moieties in the AL. Results from in vivo experiments with rabbits and rats demonstrate that the AL strongly adheres to traumatized tissue, while the anti-AL surface demonstrate efficacy in preventing of post-abdominal surgery adhesions in contrast to clinical patches. Considering the advantages in terms of therapeutic efficacy and off the shelf, the Janus patch developed in this work presents a promise for preventing postoperative adhesions and promoting regeneration of internal tissue defects.

Heterogenous Copper(0)-Assisted Dopamine Oxidation: A New Pathway to Controllable and Scalable Polydopamine Synthesis

In this study, we introduce an approach for synthesizing polydopamine (PDA) through the controlled oxidation of dopamine using metallic copper. Traditional methods of PDA synthesis often encounter challenges such as scalability, reproducibility, and control over polymerization. Our approach utilizes the catalytic properties of metallic copper in the presence of dissolved oxygen to generate reactive oxygen species (ROS) without additional chemicals. This process allows for precise control over dopamine oxidation, leading to reliable, materials and cost-effective upscalable PDA production. We investigated the reaction kinetics and the role of copper and ROS in dopamine oxidation, using several different experimental techniques. Our results demonstrate that, even at low pH, the copper-assisted method produces PDA with properties comparable to those synthesized through conventional means. We propose a mechanism for PDA synthesis that is initiated by oxygen adsorption onto copper surface, leading to the generation of various ROS which act as oxidizing agents in PDA synthesis. This method presents an advancement in the scalable and controlled production of PDA, with potential applications in various scientific and industrial fields.

Utilizing Rapid Hydrogen Peroxide Generation from 6-Hydroxycatechol to Design Moisture-Activated, Self-Disinfecting Coating

A coating that can be activated by moisture found in respiratory droplets could be a convenient and effective way to control the spread of airborne pathogens and reduce fomite transmission. Here, the ability of a novel 6-hydroxycatechol-containing polymer to function as a self-disinfecting coating on the surface of polypropylene (PP) fabric was explored. Catechol is the main adhesive molecule found in mussel adhesive proteins. Molecular oxygen found in an aqueous solution can oxidize catechol and generate a known disinfectant, hydrogen peroxide (H2O2), as a byproduct. However, given the limited amount of moisture found in respiratory droplets, there is a need to enhance the rate of catechol autoxidation to generate antipathogenic levels of H2O2. 6-Hydroxycatechol contains an electron donating hydroxyl group on the 6-position of the benzene ring, which makes catechol more susceptible to autoxidation. 6-Hydroxycatechol-coated PP generated over 3000 μM of H2O2 within 1 h when hydrated with a small amount of aqueous solution (100 μL of PBS). The generated H2O2 was three orders of magnitude higher when compared to the amount generated by unmodified catechol. 6-Hydroxycatechol-containing coating demonstrated a more effective antimicrobial effect against both Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative (Pseudomonas aeruginosa and Escherichia coli) bacteria when compared to unmodified catechol. Similarly, the self-disinfecting coating reduced the infectivity of both bovine viral diarrhea virus and human coronavirus 229E by as much as a 2.5 log reduction value (a 99.7% reduction in viral load). Coatings containing unmodified catechol did not generate sufficient H2O2 to demonstrate significant virucidal effects. 6-Hydroxycatechol-containing coating can potentially function as a self-disinfecting coating that can be activated by the moisture present in respiratory droplets to generate H2O2 for disinfecting a broad range of pathogens.

Cleavage and Noncleavage Chemistry in Reactive Oxygen Species (ROS)-Responsive Materials for Smart Drug Delivery

The design and development of advanced drug delivery systems targeting reactive oxygen species (ROS) have gained significant interest in recent years for treating various diseases, including cancer, psychiatric diseases, cardiovascular diseases, neurological diseases, metabolic diseases, and chronic inflammations. Integrating specific chemical bonds capable of effectively responding to ROS and triggering drug release into the delivery system is crucial. In this Review, we discuss commonly used conjugation linkers (chemical bonds) and categorize them into two groups: cleavable linkers and noncleavable linkers. Our goal is to clarify their unique drug release mechanisms from a chemical perspective and provide practical organic synthesis approaches for their efficient production. We showcase numerous significant examples to demonstrate their synthesis routes and diverse applications. Ultimately, we strive to present a comprehensive overview of cleavage and noncleavage chemistry, offering insights into the development of smart drug delivery systems that respond to ROS.

Acrylate monomer polymerization triggered by iron oxide magnetic nanoparticles and catechol containing microgels

Phenol and its derivatives are the most used polymerization inhibitors for vinyl-based monomers. Here, we reported a novel catalytic system composed of mussel inspired adhesive moiety, catechol, in combination with iron oxide nanoparticles (IONPs) to generate hydroxyl radical (•OH) at pH 7.4. Catechol-containing microgel (DHM) was prepared by copolymerizing dopamine methacrylamide (DMA) and N-hydroxyethyl acrylamide (HEAA), which generated superoxide (•O2-) and hydrogen peroxide (H2O2) as a result of catechol oxidation. In the presence of IONPs, the generated reactive oxygen species were further converted to •OH, which initiated free radical polymerization of various water-soluble acrylate-based monomers including neutral (acrylamide, methyl acrylamide, etc.), anionic (2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt), cationic ([2-(methacryloyloxy)ethyl]trimethylammonium chloride), and zwitterionic (2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide) monomers. Compared with the typical free radical initiating systems, the reported system does not require the addition of extra initiators for polymerization. During the process of polymerization, a bilayer hydrogel was formed in situ and exhibited the ability to bend during the process of swelling. The incorporation of IONPs significantly enhanced magnetic property of the hydrogel and the combination of DHM and IONPs also improved the mechanical properties of these hydrogels.

Structural and Molecular Fusion MRI Nanoprobe for Differential Diagnosis of Malignant Tumors and Follow-Up Chemodynamic Therapy

Enhanced imaging techniques using contrast agents enable high-resolution structural imaging to reveal space-occupying lesions but rarely provide detailed molecular information. To this end, we report a structural and molecular fusion magnetic resonance imaging (MRI) nanoprobe for differential diagnosis between benign and malignant tumors. This fusion nanoprobe, termed FFT NPs, follows a working mechanism involving a T₁-/T₂-weighted magnetic resonance tuning effect (MRET) between a magnetic Fe₃O₄ core and a paramagnetic Fe-tannic acid (Fe-TA) shell. The FFT NPs with an "always-on" inert T₂ signal provide structural MRI (sMRI) contrast of tumors while affording an activated T₁ signal in the presence of ATP, which is overproduced during the rapid growth of malignant tumors to enable molecular MRI (mMRI) of tumor lesions. We propose the use of the ratiometric mMRI:sMRI intensity to assist in the differential diagnosis of malignant 4T1 tumors from benign L929 fibroblast tumors. Furthermore, the dissociated FFT NPs were found to be able to catalyze H₂O₂ conversion in 4T1 tumors to generate excess reactive oxygen species (ROS) for chemodynamic therapy. The described fusion nanoprobe strategy enables the differential diagnosis of tumors from a combined spatial and molecular perspective with one-stop MRI imaging with potential applications in precision intervention.

Bandgap engineering approach for designing CuO/Mn3O4/CeO2 heterojunction as a novel photocatalyst for AOP-assisted degradation of Malachite green dye

A ternary nanohybrid CuO/Mn₃O₄/CeO₂ was developed in the present work using a co-precipitation-assisted hydrothermal method. The designed photocatalyst's structural, morphology, elemental composition, electronic states of elements, and optical properties were studied using corresponding analytical techniques. Results from PXRD, TEM/HRTEM, XPS, EDAX, and PL showed that the desired nanostructure had formed. Using Tauc's energy band gap plot, it was determined that the nanostructures band gap was ~ 2.44 eV, which showed the band margins of the various moieties, CeO₂, Mn₃O₄, and CuO, had modified. Thus, improved redox conditions led to a substantial decrease in the recombination rate of electron-hole pairs, which was further explained by a PL study in that charge separation plays a key role. Under exposure to visible light irradiation for 60 min, it was revealed that the photocatalyst achieved 98.98% of photodegradation efficiency for malachite green (MG) dye. The process of photodegradation proceeded according to a pseudo-first-order reaction kinetic model with an excellent rate of reaction of 0.07295 min^-1 with R² = 0.99144. The impacts of different reaction variables, inorganic salts, and water matrices were investigated. This research seeks to create a ternary nanohybrid photocatalyst with high photostability, visible spectrum activity, and reusability up to four cycles.

Simultaneous redox transformation and removal of Cr(Ⅵ) and As(Ⅲ) by polyethyleneimine modified magnetic mesoporous polydopamine nanocomposite: Insights into synergistic effects and mechanisms

Chromium(Ⅵ) and arsenic(Ⅲ) as typical anionic heavy metal pollutants normally coexist in the environment, greatly aggravating their environmental risks and elevating the difficulty of remediation. Here, a novel polyethyleneimine modified magnetic mesoporous polydopamine nanocomposite (Fe₃O₄ @mesoPDA/PEI) with abundant active functional groups was exploited as the synchronous adsorbent of Cr(Ⅵ) and As(Ⅲ). The results showed that Cr(Ⅵ) and As(Ⅲ) could mutually promote their conversions and adsorptions on Fe₃O₄ @mesoPDA/PEI. The adsorption mechanisms of Fe₃O₄ @mesoPDA/PEI were primarily redox chemistry and also involved electrostatic interactions and coordination. Cr(Ⅵ) was mainly reduced by reductive catechol, while As(Ⅲ) was oxidized to As(Ⅴ) by oxidative active substances (e.g., H₂O₂, •OH, and quinone). Meanwhile, active intermediate (semiquinone radicals) generated during the Cr(Ⅵ) reduction and As(Ⅲ) oxidation could constitute redox microcirculation with Cr(Ⅵ) and As(Ⅲ) to further accelerate redox reactions of Cr(Ⅵ) and As(Ⅲ) on Fe₃O₄ @mesoPDA/PEI, thereby exhibiting a synergistic effect. Moreover, newly immobilized Cr(Ⅲ) onto Fe₃O₄ @mesoPDA/PEI became extra active sites for As adsorption through cation bridges and then recovered by magnetic separation in favor of diminishing the environmental hazards of Cr and As. These findings also provide new inspirations for the roles of redox-active functional groups in the remediation of multiple redox-sensitive heavy metals including Cr(Ⅵ) and As(Ⅲ).

Unraveling the Role of Polydopamines in Resistive Switching in Al/Polydopamine/Al Structure for Organic Resistive Random-Access Memory

In an era of rapidly evolving artificial intelligence and 5G communications technologies, massive data storage and processing are required for the real-time operation of digital processors in conventional wearable devices. However, classical von-Neumann architecture computers are limited by bottleneck-related issues. As a solution, resistive random-access memory (RRAM) devices are being considered as next generation in-memory computing devices. Among various materials, a polydopamine (PDA) is an attractive candidate for the fabrication of wearable and flexible RRAM devices. Herein, an aluminum/PDA/aluminum structure is proposed to investigate the influence of the PDA layer on resistive switching. The resistance-switching characteristics of an Al/PDA/Al structure are investigated by changing the PDA’s coating time and an on/off ratio of 2.48 × 10³ is recorded. X-ray photoelectron spectroscopy reveals the presence of an Al₂O₃ layer in Al/PDA/Al structure, and the contents of oxygen vacancies are changed according to PDA coating time. Conductive filaments in the PDA/Al structure are confirmed by conductive atomic-force microscopy. As an application, a flexible Al/PDA/Al structure is fabricated using polyethylene terephthalate substrate and its operation is successfully confirmed. These results describe the resistive-switching characteristics, including oxygen vacancies, of Al/PDA/Al structures and provide new ways of understanding the resistive-switching mechanism of PDA-based RRAM devices.

Adsorption-enhanced photocatalytic property of Ag-doped biochar/g-C3N4/TiO2 composite by incorporating cotton-based biochar

In this study, the biochar obtained from waste cotton fibers was introduced into the Ag-doped g-C3N4/TiO2 hybrid composite through a facile one-step hydrothermal process. The morphology, elemental composition, crystal structure, microstructure, specific surface area, chemical bonding state, energy band structure, and separation efficiency of photoinduced charge carriers of the resultant composite were examined using scanning electron microscope, energy dispersive X-ray spectrometer, X-ray diffractometer, transmission electron microscope, surface area analyzer, X-ray photoelectron spectroscope, Ultraviolet-visible spectrophotometer, ultraviolet photoelectron spectroscope, and photoluminescence spectroscope. The adsorption isotherms, kinetics and thermodynamics of the biochar, Ag-doped g-C3N4/TiO2 and Ag-doped biochar/g-C3N4/TiO2 were evaluated using the model methyl orange dye. The photoacatalytic degradation of the model pollutants including methyl orange, methylene blue, congo red, and tetracycline hydrochloride and the photocatalytic reduction of Cr(VI) ions were also assessed under visible light. Experimental results indicated that the photocatalytic property of the Ag-doped biochar/g-C3N4/TiO2 was significantly enhanced through the adsorption enhancement compared with the Ag-doped g-C3N4/TiO2. This was due to the uniform doping of multi-scale porous biochar with g-C3N4 nanosheet, Ag and TiO2 nanoparticles. The adsorptive enhancement induced by the biochar resulted in the narrowed band gap, suitable electronic energy band structure, and fast separation of photoinduced charge carriers of the Ag-doped biochar/g-C3N4/TiO2, which was probably due to the coexistence of multi-valence Ti+4/+3 and Ag0/+1 species and oxygen-containing groups of biochar. The major reactive species of the Ag-doped biochar/g-C3N4/TiO2 were 1O2 and h+. The MO dye adsorption onto the Ag-doped biochar/g-C3N4/TiO2 followed the Langmuir isotherm model, pseudo-first-order and pseudo-second-order kinetic models, and the adsorption process was an endothermic reaction with entropy reduction effects. As such, the Ag-doped biochar/g-C3N4/TiO2 exhibited a promising application for the treatment of wastewater containing multi-pollutants especially organic dyes and heavy metal ions.

Metal Ion-Directed Functional Metal-Phenolic Materials

Metal ions are ubiquitous in nature and play significant roles in assembling functional materials in fields spanning chemistry, biology, and materials science. Metal-phenolic materials are assembled from phenolic components in the presence of metal ions through the formation of metal-organic complexes. Alkali, alkali-earth, transition, and noble metal ions as well as metalloids interacting with phenolic building blocks have been widely exploited to generate diverse hybrid materials. Despite extensive studies on the synthesis of metal-phenolic materials, a comprehensive summary of how metal ions guide the assembly of phenolic compounds is lacking. A fundamental understanding of the roles of metal ions in metal-phenolic materials engineering will facilitate the assembly of materials with specific and functional properties. In this review, we focus on the diversity and function of metal ions in metal-phenolic material engineering and emerging applications. Specifically, we discuss the range of underlying interactions, including (i) cation-π, (ii) coordination, (iii) redox, and (iv) dynamic covalent interactions, and highlight the wide range of material properties resulting from these interactions. Applications (e.g., biological, catalytic, and environmental) and perspectives of metal-phenolic materials are also highlighted.

Structure-Element Surface Modification Strategy Enhances the Antibacterial Performance of Zr-BMGs

Zirconium-based metallic glasses (Zr-BMGs) have attracted tremendous attention in healthcare fields, especially in the design of surgical tools and orthopedic implants, due to their unique amorphous structure; however, the application of Zr-BMG-based medical devices is hindered by bacterial contamination. Here, a structure-element strategy is proposed to improve the antibacterial performance of Zr-BMGs by surface laser nanostructuring and silver nanoparticle (AgNP) deposition. The laser nanostructuring process generates a disordered nanoparticle structure (NP) and laser-induced periodic surface structure (LIPSS) to decrease the surface bacterial adhesion and increase the internal antimicrobial ion release. Moreover, after Ag deposition and hydrogen peroxide (H₂O₂) treatment, the antibacterial adhesion ability of the Zr-BMG surface can be further improved without any influence on the crystallization of Zr-BMGs and the release of antibacterial copper/nickel (Cu/Ni). The antibacterial effect of the LIPSS and the NP surfaces presents over 90% bacterial killing ratio, which is superior to that of the naked Zr-BMGs with less than 60% bacterial killing ratio. In vitro and in vivo tests show that the Ag-deposited and H₂O₂-treated LIPSS surfaces exhibit an optimal balance between the antibacterial property and the biocompatibility compared with the polished, NP structured or LIPSS structured surfaces. It is assumed that such structure-element surface modification strategy can improve the antibacterial activity of metal-containing surgical tools and orthopedic implants, improving the success rate of medical treatment.

Advancements in release-active antimicrobial biomaterials: A journey from release to relief

Escalating medical expenses due to infectious diseases are causing huge socioeconomic pressure on mankind globally. The emergence of antibiotic resistance has further aggravated this problem. Drug-resistant pathogens are also capable of forming thick biofilms on biotic and abiotic surfaces to thrive in a harsh environment. To address these clinical problems, various strategies including antibacterial agent delivering matrices and bactericidal coatings strategies have been developed. In this review, we have discussed various types of polymeric vehicles such as hydrogels, sponges/cryogels, microgels, nanogels, and meshes, which are commonly used to deliver antibiotics, metal nanoparticles, and biocides. Compositions of these polymeric matrices have been elaborately depicted by elucidating their chemical interactions and potential activity have been discussed. On the other hand, various implant/device-surface coating strategies which exploit the release-active mechanism of bacterial killing are discussed in elaboration. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Universal Surface Coating with a Non-Phenolic Molecule, Sulfonated Pyrene

Nature-inspired small molecules such as catecholamines and polyphenols have gained a great deal of attention because of the exceptional surface-coating property that is applicable to many diverse substrates. Many researchers have conducted studies to expand molecular pools with surface-coating properties, but previous reports have still been limited to phenolic molecules as surface-coating agents. In this study, we describe for the first time the material-independent coating properties of nonphenolic molecules, namely, sulfonated pyrenes with Zr^IV ions. Owing to the binding capability with several oxygen-containing ligands, Zr^IV can be used for the molecular assembly of sulfonated pyrenes. We also report on the mixing of multiple sulfonated pyrenes and Zr^IV results in cross-linked complexes that can coat diverse solid substrates. The resulting coating can serve as a platform for grafting functional polysaccharides.

Mechanistic Insight into the Reactivities of Aqueous-Phase Singlet Oxygen with Organic Compounds

Singlet oxygen (¹O₂) is a selective reactive oxygen species that plays a key role for the fate of various organic compounds in the aquatic environment under sunlight irradiation, engineered water oxidation systems, atmospheric water droplets, and biomedical systems. While the initial rate-determining charge-transfer reaction mechanisms and kinetics of ¹O₂ have been studied extensively, no comprehensive studies have been performed to elucidate the reaction mechanisms with organic compounds that have various functional groups. In this study, we use density functional theory calculations to determine elementary reaction mechanisms with a wide variety of organic compounds. The theoretically calculated aqueous-phase free energies of activation of single electron transfer and ¹O₂ addition reactions are compared to the experimentally determined rate constants in the literature to determine linear free-energy relationships. The theoretically calculated free energies of activation for the groups of phenolates and phenols show excellent correlations with the Hammett constants that accept electron densities by through-resonance. The dominant elementary reaction mechanism is discussed for each group of compounds. As a practical implication, we demonstrate the fate of environmentally relevant organic compounds induced by photochemically produced intermediate species at different pH and evaluate the impact of predicting rate constants to the half-life.

Pomegranate-Like CuO2@SiO2 Nanospheres as H2O2 Self-Supplying and Robust Oxygen Generators for Enhanced Antibacterial Activity

Reactive oxygen species (ROS)-induced nanosystems represent one of the most essential, efficient, and encouraging nanobactericides for eliminating bacterial infection concerning the increasing resistance threats of existing antibiotics. Among them, Fenton-type metal peroxide nanoparticles are exciting nanomaterials with intriguing physiochemical properties, yet the study of this antimicrobial agent is still in its infancy. Herein, a robust pH-responsive Fenton nanosystem is constructed by the assembly of copper peroxide nanodots in pomegranate-like mesoporous silica nanoshells (CuO₂@SiO₂) that are capable of self-supplying H₂O₂ and sustainably generating O₂. The enhanced antimicrobial performance is attributed to the pH responsiveness and excellent Fenton catalytic activity through either the Cu²⁺-catalyzed conversion of H₂O₂ to detrimental ROS under acid treatment or in situ O₂ evolution in neutral media. Moreover, in vitro and in vivo investigations demonstrate that this nanocomposite can exhibit boosted antimicrobial capabilities and can significantly accelerate skin wound closure, while retaining outstanding cytocompatibility and hemocompatibility. Given its excellent physicochemical and antimicrobial properties, the broad application of this nanocomposite in bacteria-associated wound management is anticipated.

Oxidation Chemistry of Catechol Utilized in Designing Stimuli-Responsive Adhesives and Antipathogenic Biomaterials

Mussel foot proteins (Mfps) contain a large amount of the catecholic amino acid, DOPA, allowing the marine organism to anchor themselves onto various surfaces in a turbulent and wet environment. Modification of polymers with catechol imparts these materials with a strong, wet adhesive property. The oxidation chemistry and oxidation state of catechol are critical to the design of synthetic adhesives and biomaterials. In this Mini-Review, the effect of catechol oxidation state on adhesion, oxidation-mediated catechol cross-linking, and the generation of reactive oxygen species (ROS) during catechol oxidation are reviewed. Finally, the tuning of catechol oxidation state in designing stimuli-responsive adhesives and the utilization of ROS byproducts for antimicrobial and antiviral applications are reviewed.

Catechol-Based Antimicrobial Polymers

Catechol is a key constituent in mussel adhesive proteins and is responsible for strong adhesive property and crosslinking formation. Plant-based polyphenols are also capable of chemical interactions similar to those of catechol and are inherently antimicrobial. This review reports a series of catechol-based antimicrobial polymers classified according to their antimicrobial mechanisms. Catechol is utilized as a surface anchoring group for adhering monomers and polymers of known antimicrobial properties onto various types of surfaces. Additionally, catechol's ability to form strong complexes with metal ions and nanoparticles was utilized to sequester these antimicrobial agents into coatings and polymer matrices. During catechol oxidation, reactive oxygen species (ROS) is generated as a byproduct, and the use of the generated ROS for antimicrobial applications was also introduced. Finally, polymers that utilized the innate antimicrobial property of halogenated catechols and polyphenols were reviewed.

Oxi-Redox Selective Breast Cancer Treatment: An In Vitro Study of Theranostic In-Based Oxide Nanoparticles for Controlled Generation or Prevention of Oxidative Stress

In this article, we demonstrate that specifically engineered oxide nanoparticles (NPs) have the potential to act as theranostic materials that are able to generate or prevent oxidative stress through their oxi-redox activity in various types of malignant and nonmalignant cells. The oxi-redox activity is related to the type and presence of surface defects, which is modified with appropriate synthesis conditions. In the present work, we used MDA-MB-231 and MCF-7 human breast cancer cells and nonmalignant MCF-10A human breast cells to demonstrate how controlled oxidative stress mediated by specifically nanoengineered indium tin oxide (ITO) NPs can selectively induce cell death in the cancer cells while reducing the oxidative stress in the normal cells and supporting their proliferation. The ITO NPs are also promising nanotheranostic materials for cancer therapy and contrast agents because of their multimodal imaging capabilities. We demonstrate that the synthesized ITO NPs can selectively increase the generation of reactive oxygen species (ROS) in both breast tumor cell lines, resulting in activation of apoptosis, and can also greatly suppress the cellular proliferation in both types of tumor cells. In contrast, the ITO NPs exhibit ROS scavenging-like behavior, significantly decreasing the ROS levels in MCF-10A cells exposed to the additional ROS, hydrogen peroxide (H₂O₂), so that they protect the proliferation of nonmalignant MCF-10A cells from ROS damage. In addition, fluorescent microscopy images revealed that the ITO NPs emit strong fluorescence that could be used to reveal their location. Moreover, computed tomography imaging demonstrated that the ITO NPs exhibited a comparable capability toward anatomical contrast enhancement. These results suggest that the synthesized ITO NPs have the potential to be a novel selective therapeutic agent with a multimodal imaging property for anticancer treatment.

Melanin pigments extracted from horsehair as antibacterial agents

Here we present the important findings related to biologically derived pigments for potential use as antibacterial agents. Melanin biopigments extracted from Equus ferus hair exhibit a homogeneous elliptical microstructure with highly ordered semicrystalline features. Spectroscopic analysis indicates that melanin contains a high degree of redox active catechol groups, which can produce reactive oxygen species. The antibacterial activity of melanins was tested by incubating Escherichia coli and Staphylococcus aureus with melanins. The results showed 100% bacterial growth inhibition within 4 h. This finding suggests that melanin pigments may serve as naturally occurring antibacterial agents with unique redox chemistry and reactive oxygen species generation capability.

Hydroxyl Radical Generation Through the Fenton-Like Reaction of Hematin- and Catechol-Functionalized Microgels

Hydroxyl radical (^•OH) is a potent reactive oxygen species with the ability to degrade hazardous organic compounds, kill bacteria, and inactivate viruses. However, an off-the-shelf, portable, and easily activated biomaterial for generating ^•OH does not exist. Here, microgels were functionalized with catechol, an adhesive moiety found in mussel adhesive proteins, and hematin (HEM), a hydroxylated Fe³⁺ ion-containing porphyrin derivative. When the microgel was hydrated in an aqueous solution with physiological pH, molecular oxygen in the solution oxidized catechol to generate H₂O₂, which was further converted to ^•OH by HEM. The generated ^•OH was able to degrade organic dyes, including orange II and malachite green. Additionally, the generated ^•OH was antimicrobial against both gram-negative (Escherichia coli) and gram-positive (Staphylococcus epidermidis) bacteria with the initial concentration of 10⁶-10⁷ CFU/mL. These microgels also reduced the infectivity of a non-enveloped porcine parvovirus and an enveloped bovine viral diarrhea virus by 3.5 and 4.5 log reduction values, respectively (99.97-99.997% reduction in infectivity). These microgels were also functionalized with positively charged [2-(methacryloyloxy)ethyl] trimethylammonium chloride (METAC), which significantly enhanced the antibacterial and antiviral activities through electrostatic interaction between the negatively charged pathogens and the microgel. These microgels can potentially serve as a lightweight and portable source of disinfectant, for an on-demand generation of ^•OH with a wide range of applications.

Facile Electrochemical Demethylation of 2-Methoxyphenol to Surface-Confined Catechol on the MWCNT and Its Efficient Electrocatalytic Hydrazine Oxidation and Sensing Applications

Owing to its biological significance, preparation of stable surface-confined catechol (CA) is a long-standing interest in electrochemistry and surface chemistry. In this connection, various chemical approaches such as covalent immobilization (using amine- and carboxylate-functionalized CA, diazotization-based coupling, and Michael addition reaction), self-assembled monolayer on gold (thiol-functionalized CA is assembled on the gold surface), CA adsorption on the ad-layer of a defect-free single-crystal Pt surface, π-π bonding, CA pendant metal complexes, and CA-functionalized polymer-modified electrodes have been reported in the literature. In general, these conventional methods are involved with a series of time-consuming synthetic procedures. Indeed, the preparation of a surface-fouling-free surface-confined system is a challenging task. Herein, we introduce a new and facile approach based on electrochemical demethylation of 2-methoxyphenol as a precursor on the graphitic surface (MWCNT) at a bias potential, 0.5 V vs Ag/AgCl in neutral pH solution. Such an electrochemical performance resulted in the development of a stable and well-defined redox peak at E ^o' = 0.15 (A2/C2) V vs Ag/AgCl within 10 min of preparation time in pH 7 phosphate buffer solution. Calculated surface excess (16.65 × 10^-9 mol cm^-2) is about 10-1000 times higher than the values reported with other preparation methods. The product (catechol) formed on the modified electrode was confirmed by collective electrochemical and physicochemical characterizations such as potential segment analysis, TEM, Raman, IR, UV-vis, GC-MS, and NMR spectroscopic techniques, and thin-layer chromatographic studies. The electrocatalytic efficiency of the surface-confined CA system was demonstrated by studying hydrazine oxidation and sensing reactions in a neutral pH solution. This new system is found to be tolerant to various interfering biochemicals such as uric acid, xanthine, hypoxanthine, glucose, nitrate, hydrogen peroxide, ascorbic acid, Cu²⁺, and Fe²⁺. Since the approach is simple, rapid, and reproducible, a variety of surface-confined CA systems can be prepared.