N, S, and P-Co-doped Carbon Quantum Dots: Intrinsic Peroxidase Activity in a Wide pH Range and Its Antibacterial Applications

Ultra-trace Ag doped carbon quantum dots with peroxidase-like activity for the colorimetric detection of glucose

Carbon quantum dots (CQDs) have significant applications in nanozymes. However, previous studies have not elucidated the structure-activity relationship and enzyme mechanism. In this study, we employed a one-step microwave method to synthesize ultra-trace Ag-doped carbon quantum dots (Ag-CQDs). In the presence of hydrogen peroxide (H2O2), we used the oxidative coupling reaction of 3,3',5,5'-tetramethylbenzidine (TMB) to evaluate the intrinsic peroxidase-like activity, kinetics, and mechanism of Ag-CQDs. The trace amount of doped Ag (1.64 %) facilitated electron transfer from the CQDs interior to the surface. The electron transfer triggered the peroxide activity of CQDs, producing hydroxyl radical (·OH), which oxidized the colorless TMB to blue-colored TMB (oxTMB). By coupling with glucose oxidase (GOx), the Ag-CQDs/H2O2/TMB system has been used for colorimetric glucose determination. The system demonstrated a low detection limit (0.17 µM), wide linear range (0.5-5.5 µM), and satisfactory results when fruit juice was analyzed. This study reports a feasible method for the colorimetric detection of glucose by synthesizing ultra-trace Ag-doped carbon quantum dots with peroxidase-mimicking activity.

Ag-carbon dots with peroxidase-like activity for colorimetric and SERS dual mode detection of glucose and glutathione

Currently, nanozymes have made important research progress in the fields of catalysis, biosensing and tumor therapy, but most of nanozymes sensing systems are single-mode detection, which are easily affected by environment and operation, so it is crucial to construct nanozymes sensing system with dual-signal detection to obtain a more stable and reliable performance. In this paper, Ag-carbon dots (Ag-CDs) bifunctional nanomaterials were synthesized using carbon dots as reducing agent and protective agent by a facile and green one-step method. A simple and sensitive colorimetric-SERS dual-mode sensing platform was constructed for the detection of glucose and glutathione(GSH) in body fluids by taking advantage of good peroxidase-like and SERS activities of Ag-CDs. Ag-CDs catalyzes H2O2 to hydroxyl radicals(•OH), which oxidized TMB to form ox-TMB blue solution with characteristic absorption peak at 652 nm and Raman characteristic peak at 1607 cm-1. Ag-CDs sensing method exhibited high performance for glucose and GSH with detection limits for colorimetric and SERS as low as 11.30 μM and 3.54 μM, 0.38 μM and 0.24 μM respectively (S/N = 3). In addition, Ag-CDs have good stability and uniformity, ensuring long-term applicability of catalytic system. This colorimetric-SERS dual-mode sensing platform can be used for the determination of glucose and GSH in saliva and urine, and has the advantages of simple, low cost, rapid, and high accuracy, which has a potential application prospect in biosensor and medical research.

Phosphorus Modulated Peroxidase-Like Activity of Carbon Dots for Colorimetric Detection of Acid Phosphatase

The precise regulation of nanoenzyme activity is of great significance for application to biosensing analysis. Herein, the peroxidase-like activity of carbon dots was effectively modulated by doping phosphorus, which was successfully employed for sensitive, selective detection of acid phosphatase (ACP). Phosphorus-doped carbon dots (P-CDs) with excellent peroxidase-like activity were synthesized by a one-pot hydrothermal method, and the catalytic activity could be easily modulated by controlling the additional amount of precursor phytic acid. P-CDs could effectively catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue TMB oxidation products in the presence of hydrogen peroxide. While ACP was able to catalyze the hydrolysis of L-ascorbyl-2-phosphate trisodium salt (AAP) to produce ascorbic acid (AA), which inhibited the peroxidase-like activity of P-CDs, by combining P-CDs nanoenzymes and ACP-catalyzed hydrolysis the colorimetric method was established for ACP detection. The absorbance variation showed a good linear relationship with ACP concentration in the range of 0.4-4.0 mU/mL with a limit of detection at 0.12 mU/mL. In addition, the method was successfully applied to detect ACP in human serum samples with recoveries in the range of 98.7-101.6%. The work provides an effective strategy for regulating nanoenzymes activity and a low-cost detection technique for ACP.

Green synthesis of yeast cell wall-derived carbon quantum dots with multiple biological activities

Hypothesis

Yeast cell walls are a sustainable biomass source containing carbon and other elements like phosphorus. Converting cell walls into valuable nanomaterials like carbon quantum dots (CQDs) is of interest.

Experiments

Cell walls from Saccharomyces cerevisiae were hydrothermally treated in 0.5 M H2SO4 to produce CQDs. Multiple analytical techniques were utilized to confirm phosphorus-doping (P-CQDs), characterize the fluorescence properties, determine quantum yield, and evaluate the sensing, antimicrobial, photocatalytic, and antioxidant capacities.

Findings

A successful synthesis of P-CQDs was achieved with strong blue fluorescence under UV excitation, 19 % quantum yield, and excellent stability. The P-CQDs showed sensitive fluorescence quenching in response to ferric ions with a 201 nM detection limit. Antibacterial effects against Escherichia coli and Staphylococcus aureus were demonstrated. P-CQDs also exhibited dye degradation under sunlight and antioxidant activity. So, the prepared P-CQDs displayed promising multifunctional capabilities for metal ion detection, disinfection, and environmental remediation. Further research is required to fully realize and implement the multifunctional potential of P-CQDs in real-world applications.

Nitrogen and Chlorine Co-doped Carbon Dots as a Highly Selective and Sensitive Fluorescent Probe for Sensing of PH, Tetracycline Detection and Cell Imaging

Carbon dots have been widely focused on the field of sensing and detection due to their excellent optical property. Herein, novel orange fluorescent nitrogen and chlorine co-doped carbon dots (N,Cl-CDs) are obtained by one-pot hydrothermal method using o-phenylenediamine and neutral red. Based on the inner filter effect, the prepared N,Cl-CDs can be innovatively developed as an effective "signal-off" multifunctional sensing platform for sensitive determination of tetracycline. The proposed sensor was utilized to realize the determination of tetracycline in Rirver water samples/milk samples (λex = 390 nm, λem = 606 nm) with satisfactory recoveries and relative standard deviations. The linear range of are 0.05 to 45 μM and 45 to135 μM, and detection limit is 3.9 nM (3σ/m). Meanwhile, the luminescent intensity of N,Cl-CDs was reduced gradually when pH changed continuously from 12 to 2, showing a pH-responsive fluorescence property with two linear ranges of pH 3-7 and pH 7-10. In addition, due to the characteristics of low toxicity and excellent biocompatibility, the N, Cl-CDs were also used in the imaging of oocystis cells, which is hopeful to realize the detection of tetracycline in living cells.

Microwave-assisted synthesis, characterization and in vitro biomedical applications of Hibiscus rosa-sinensis Linn.-mediated carbon quantum dots

In recent years, carbon quantum dots (CQDs) have garnered considerable attention as a promising material for biomedical applications because of their unique optical and biological properties. In this study, CQDs were derived from the leaves of Hibiscus rosa-sinensis Linn. via microwave-assisted technique and characterized using different techniques such as ultraviolet-visible, Fourier transform infrared, fluorescence spectrometry, X-ray diffraction, dynamic light scattering, transmission electron microscopy and energy-dispersive X-ray spectroscopy. Subsequently, their potential for biomedical applications was investigated through in vitro assays assessing scratch healing, anti-inflammatory, antibacterial, and cytotoxicity properties. It was found that the CQDs were fluorescent, polycrystalline, quasi-spherical, ~ 12 nm in size with presence of -OH and -COOH groups on their negatively charged surfaces, and demonstrated good anti-inflammatory by inhibiting protein denaturation, cyclooxygenase-2 and regulating inflammatory cytokines. The CQDs also exhibited antimicrobial activity against Klebsiella pneumoniae and Bacillus cereus, good biocompatibility, along with excellent promotion of cell proliferation in vitro, indicating their potential as a anti-inflammatory and wound healing material. The properties were more enhanced than their precursor, H. rosa-sinensis leaf extract. Hence, the CQDs synthesized from the leaves of H. rosa-sinensis can serve as a potential biomedical agent.

Breaking the pH Limitation of Nanozymes: Mechanisms, Methods, and Applications

Although nanozymes have drawn great attention over the past decade, the activities of peroxidase-like, oxidase-like, and catalase-like nanozymes are often pH dependent with elusive mechanism, which largely restricts their application. Therefore, a systematical discussion on the pH-related catalytic mechanisms of nanozymes together with the methods to overcome this limitation is in need. In this review, various nanozymes exhibiting pH-dependent catalytic activities are collected and the root causes for their pH dependence are comprehensively analyzed. Subsequently, regulatory concepts including catalytic environment reconstruction and direct catalytic activity improvement to break this pH restriction are summarized. Moreover, applications of pH-independent nanozymes in sensing, disease therapy, and pollutant degradation are overviewed. Finally, current challenges and future opportunities on the development of pH-independent nanozymes are suggested. It is anticipated that this review will promote the further design of pH-independent nanozymes and broaden their application range with higher efficiency.

Construction Strategy and Mechanism of a Novel Wood Preservative with Excellent Antifungal Effects

Wood is a naturally porous material prone to microbial erosion and degradation in outdoor environments. Therefore, the development of an environmentally friendly wood preservative with excellent antibacterial effects and low toxicity is urgently needed. In this study, nitrogen-doped carbon quantum dots (N-CQDs) with excellent antifungal performance and fluorescent properties were synthesized using a one-step hydrothermal method with chitosan quaternary ammonium salt (HACC) as the raw material. The fluorescence characteristics of N-CQD preservatives can help track their position and distribution in wood. The minimum inhibitory concentration (MIC) of N-CQDs is 1.8 mg/mL, which was nearly 22 times lower than that of HACC (40.0 mg/mL) in the PDA medium. The decay resistance test demonstrated that wood treated with N-CQDs showed a considerably reduced decay degree and its mass loss rate decreased from 46 ± 0.5% to 3.8 ± 0.5%. Biological transmission electron microscopy revealed that N-CQDs effectively destroyed fungal cell structures, thereby hindering the growth of Coriolus versicolor. N-CQDs synthesized using the one-step hydrothermal method can be used as an efficient wood preservative that can effectively improve the utilization and service life of wood.

Fe-codoped carbon dots serving as a peroxidase mimic to generate in situ hydrogen peroxide for the visual detection of glucose

Nanozyme technology has gained significant regard and been successfully implemented in various applications including chemical sensing, bio-medicine, and environmental monitoring. Fe-CDs were synthesized and characterized well in this study. As compared to HRP (3.7 mM), the Fe-CDs exhibited a higher affinity towards H2O2 (0.2 mM) using the steady-state kinetic assay and stronger catalytic capability by changing the color of TMB to the blue color of the oxidized state, oxTMB. Additionally, an efficient peroxidase mimic, Fe-CDs/GOx, based on the hybrid cascade system to produce in situ H2O2 for the visual detection of glucose (color change: colorless to blue, and then to green), has been developed in detail, with limits of detection (LODs) for H2O2 and glucose of 0.33 μM and 1.17 μM, respectively. The changes further demonstrate a linear relationship between absorbance and H2O2 concentration, ranging from 10 to 60 μM, and for glucose (1 to 60 μM). To assess the accuracy and detection capability of the Fe-CDs/GOx system, we evaluated a real human serum sample obtained from adult males in a local hospital. In conclusion, Fe-CDs serving as a peroxidase mimic have the potential for various applications in the fields of biomedicine and nanozymes.

Chitosan-chelated carbon dots-based nanozyme of extreme stability with super peroxidase activity and antibacterial ability for wound healing

Bacterial infection often leads to failed wound healing, causing one-third of death cases globally. However, antibacterial nanomaterials and natural enzymes face limitations including low antibacterial efficiency, lack of catalytic performance, low safety, and instability. Therefore, a new Fe/N-doped chitosan-chelated carbon dot-based nanozyme CS@Fe-N CDs was developed, which showed multiple advantages such as highly efficient antibacterial activity, excellent peroxidase-like activity, high stability, and high biocompatibility, shortening the wound healing time. The ultra-small (6.14 ± 3.38 nm) CS@Fe-N CDs nanozyme accelerated the H2O2 to ·OH conversion, exhibiting excellent antibacterial performance against Staphylococcus aureus. The antibacterial activity was increased by over 2000-fold after catalysis. The CS@Fe-N CDs nanozyme also displayed outstanding peroxidase activity (Vmax/Km = 1.77 × 10-6/s), 8.8-fold higher than horseradish peroxidase. Additionally, the CS@Fe-N CDs nanozyme exhibited high stability at broad pH values (pH 1-12) and temperature ranges (20-90 °C). In vitro evaluation of cell toxicity proved that the CS@Fe-N CDs nanozyme had negligible cytotoxicity. In vivo, wound healing experiments demonstrated that the CS@Fe-N CDs could shorten the healing time of rat wounds by at least 4 days, and even had a better curative effect than penicillin. In conclusion, this therapeutic platform provides an effective antibacterial and biologically safe healing strategy for skin wounds.

Boric Acid-Functionalized Carbon Dots as a High-Performance Antibacterial Agent against Escherichia coli

Bacterial infections and antibiotic abuse are a global threat to human health. In recent years, there has been a boom in research on antimicrobial agents with low toxicity and efficient nanomaterials. Boric acid-functionalized carbon dots (B-CDs) with negative surface charge were synthesized by the hydrothermal method. Covalent bonds were formed between the boric acid groups and the cis-diol groups of the polysaccharide in the bacterial cell wall, and numerous B-CDs were trapped on the bacterial surface. In the experiments of antibacterial activity, B-CDs presented strong bactericidal activity against Escherichia coli (E. coli) with a minimum bactericidal concentration of 12.5 μg/mL. The antibacterial mechanism suggested that B-CDs entered the cell interior by diffusion and posed significant damage to the double helix structure of E. coli DNA. Furthermore, B-CDs exhibited low toxicity. The results demonstrated that the novel antimicrobial B-CDs not only fought against E. coli infection and antibiotic misuse but also provided new ideas for safe and effective antimicrobial agents of carbon nanomaterials.

Metal-organic framework-modulated Fe3O4 composite au nanoparticles for antibacterial wound healing via synergistic peroxidase-like nanozymatic catalysis

Bacterial wound infections are a serious threat due to the emergence of antibiotic resistance. Herein, we report an innovative hybrid nanozyme independent of antibiotics for antimicrobial wound healing. The hybrid nanozymes are fabricated from ultra-small Au NPs via in-situ growth on metal-organic framework (MOF)-stabilised Fe3O4 NPs (Fe3O4@MOF@Au NPs, FMA NPs). The fabricated hybrid nanozymes displayed synergistic peroxidase (POD)-like activities. It showed a remarkable level of hydroxyl radicals (·OH) in the presence of a low dose of H2O2 (0.97 mM). Further, the hybrid FMA nanozymes exhibited excellent biocompatibility and favourable antibacterial effects against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The animal experiments indicated that the hybrid nanozymes promoted wound repair with adequate biosafety. Thus, the well-designed hybrid nanozymes represent a potential strategy for healing bacterial wound infections, without any toxic side effects, suggesting possible applications in antimicrobial therapy.

Nanomedicine for the Detection and Treatment of Ocular Bacterial Infections

Ocular bacterial infection is a prevalent cause of blindness worldwide, with substantial consequences for normal human life. Traditional treatments for ocular bacterial infections areless effective, necessitating the development of novel techniques to enable accurate diagnosis, precise drug delivery, and effective treatment alternatives. With the rapid advancement of nanoscience and biomedicine, increasing emphasis has been placed on multifunctional nanosystems to overcome the challenges posed by ocular bacterial infections. Given the advantages of nanotechnology in the biomedical industry, it can be utilized to diagnose ocular bacterial infections, administer medications, and treat them. In this review, the recent advancements in nanosystems for the detection and treatment of ocular bacterial infections are discussed; this includes the latest application scenarios of nanomaterials for ocular bacterial infections, in addition to the impact of their essential characteristics on bioavailability, tissue permeability, and inflammatory microenvironment. Through an in-depth investigation into the effect of sophisticated ocular barriers, antibacterial drug formulations, and ocular metabolism on drug delivery systems, this review highlights the challenges faced by ophthalmic medicine and encourages basic research and future clinical transformation based on ophthalmic antibacterial nanomedicine.

A Multifunctional Nanozyme with NADH Dehydrogenase-Like Activity and Nitric Oxide Release under Near-Infrared Light Irradiation as an Efficient Therapeutic for Antimicrobial Resistance Infection and Wound Healing

In recent years, antimicrobial resistance (AMR) has become one of the greatest threats to human health. There is an urgent need to develop new antibacterial agents to effectively treat AMR infection. Herein, a novel nanozyme platform (Cu,N-GQDs@Ru-NO) is prepared, where Cu,N-doped graphene quantum dots (Cu,N-GQDs) are covalently functionalized with a nitric oxide (NO) donor, ruthenium nitrosyl (Ru-NO). Under 808 nm near-infrared (NIR) light irradiation, Cu,N-GQDs@Ru-NO demonstrates nicotinamide adenine dinucleotide (NADH) dehydrogenase-like activity for photo-oxidizing NADH to NAD+ , thus disrupting the redox balance in bacterial cells and resulting in bacterial death; meanwhile, the onsite NIR light-delivered NO effectively eradicates the methicillin-resistant Staphylococcus aureus (MRSA) bacterial and biofilms, and promotes wound healing; furthermore, the nanozyme shows excellent photothermal effect that enhances the antibacterial efficacy as well. With the combination of NADH dehydrogenase activity, photothermal therapy, and NO gas therapy, the Cu,N-GQDs@Ru-NO nanozyme displays both in vitro and in vivo excellent efficacy for MRSA infection and biofilm eradication, which provides a new therapeutic modality for effectively treating MRSA inflammatory wounds.

Synthesis, properties and mechanism of carbon dots-based nano-antibacterial materials

Antibiotics play an important role in the treatment of diseases, but bacterial resistance caused by their widespread and unreasonable use has become an urgent problem in clinical treatment. With the rapid advancement of nanoscience and nanotechnology, the development of nanomedicine has been transformed into a new approach to the problem of bacterial resistance. As a new type of carbon-based nanomaterial, carbon dots (CDs) have attracted the interest of antibacterial researchers due to their ease of preparation, amphiphilicity, facile surface functionalization, and excellent optical properties, among other properties. This article reviewed the synthesis methods and properties of various CDs and their composites in order to highlight the advancements in the field of CDs-based antibacterial agents. Then we focused on the relationship between the principal properties of CDs and the antibacterial mechanism, including the following: (1) the physical damage caused by the small size, amphiphilicity, and surface charge of CDs. (2) Photogenerated electron transfer characteristics of CDs that produce reactive oxygen species (ROS) in themselves or in other compounds. The ability of ROS to oxidize can lead to the lipid peroxidation of cell membranes, as well as damage proteins and DNA. (3) The nano-enzyme properties of CDs can catalyze reactions that generate ROS. (4) Synergistic antibacterial effect of CDs and antibiotics or other nanocomposites. Finally, we look forward to the challenges that CDs-based nanocomposites face in practical antibacterial applications and propose corresponding solutions to further expand the application potential of nanomaterials in the treatment of infectious diseases, particularly drug-resistant bacterial infections.

Application of f-FeNC@GOx cascade enzyme nanomaterials in the healing of infected wounds

AIMS

Bacterial infection is a significant factor contributing to the deterioration of wounds, and the misuse of antibiotics has exacerbated bacterial resistance. Therefore, there is an urgent need to develop a novel antibacterial strategy to replace conventional therapies. This study aims to construct a self-activated cascade reaction nanozyme, f-FeNC@GOx, which triggers a cascade reaction in the presence of glucose. This cascade reaction generates highly toxic hydroxyl radicals (OH), thereby achieving the goal of eliminating bacteria and promoting wound healing.

MATERIAL AND METHODS

In vitro antibacterial experiments, bacterial spread plate method, Live/Dead staining, and crystal violet staining were conducted to analyze the antibacterial ability and mechanism of f-FeNC@GOx. In vivo experiments, a mouse wound model was established, and H&E and Masson staining of wound tissues were performed to assess the antibacterial activity of the f-FeNC@GOx in vivo.

KEY FINDINGS

The in vivo and in vitro experiments confirmed that f-FeNC@GOx exhibited significant antibacterial effect against both Staphylococcus aureus and Escherichia coli in the presence of glucose. Furthermore, it showed optimal wound healing performance in the wound models.

SIGNIFICANCE

These findings suggested that f-FeNC@GOx was a novel and effective antibacterial nanomaterial, which provided a promising antibacterial strategy using nanoenzyme based cascade reaction.

Peroxidase mimics of platinum-group metals for in vitro diagnostics: opportunities and challenges

Platinum-group metal (PGM) nanostructures with peroxidase-like catalytic activities (i.e., peroxidase mimics) have been actively developed and applied to in vitro diagnostics in recent years. This article provides our viewpoints on this emerging field from the perspectives of materials science and solid-state chemistry angles. We start with an introduction to PGM peroxidase mimics, their catalytic efficiencies, and insights into catalysis from computational simulations. We then discuss chemical approaches to the synthesis of PGM peroxidase mimics with desired physicochemical parameters and catalytic properties. Then, we elaborate on general methods for functionalizing the surfaces of PGM mimics with bioreceptors. Thereafter, we highlight the applications of PGM mimics in in vitro diagnostics, emphasizing the interactions of PGM mimics with other components of a diagnostic system. We conclude this article with our opinions on the challenges and opportunities in this field.

Preparation of N-doped carbon dots and application to enhanced photosynthesis

Regulation of photosynthesis rates is one of the key ways to increase crop yields. Carbon dots (CDs), which are low-toxity and biocompatible optical nanomaterials, can be easily prepared and are ideal for improving photosynthesis efficiency. In this study, nitrogen-doped CDs (CNDs) with a fluorescent quantum yield of 0.36 were synthesized via a one-step hydrothermal method. These CNDs can convert a part of ultraviolet light in solar energy to blue light (emission peak at 410 nm) that can be utilized in photosynthesis and that overlaps with the optical absorption spectrum of chloroplasts in the blue light zone. Consequently, chloroplasts can pick up photons excited by the CNDs and transfer them to the photosynthetic system in the form of electrons, thereby accelerating the photoelectron transport rate. These behaviors can reduce ultraviolet light stress on wheat seedlings and improve the efficiency of electron capture and transfer from chloroplasts through optical energy conversion. As a result, various photosynthetic indices and biomass of wheat seedlings are improved. Cytotoxicity experiments have showed that CNDs within a certain concentration range almost do not affect cell survival.

Antibacterial Carbon Dots: Mechanisms, Design, and Applications

The increase in antibiotic resistance promotes the situation of developing new antibiotics at the forefront, while the development of non-antibiotic pharmaceuticals is equally significant. In the post-antibiotic era, nanomaterials with high antibacterial efficiency and no drug resistance make them attractive candidates for antibacterial materials. Carbon dots (CDs), as a kind of carbon-based zero-dimensional nanomaterial, are attracting much attention for their multifunctional properties. The abundant surface states, tunable photoexcited states, and excellent photo-electron transfer properties make sterilization of CDs feasible and are gradually emerging in the antibacterial field. This review provides comprehensive insights into the recent development of CDs in the antibacterial field. The topics include mechanisms, design, and optimization processes, and their potential practical applications are also highlighted, such as treatment of bacterial infections, against bacterial biofilms, antibacterial surfaces, food preservation, and bacteria imaging and detection. Meanwhile, the challenges and outlook of CDs in the antibacterial field are discussed and proposed.

Integration of N, P-doped carbon quantum dots with hydrogel as a solid-phase fluorescent probe for adsorption and detection of Fe3

In this work, a novel nitrogen-phosphorus co-doped carbon quantum dots (N, P-CQDs) hydrogel was developed utilizing the as-synthesized N, P-CQDs and acrylamide (AM) with the existence of ammonium persulfate and N, N'-methylene bisacrylamide (N-MBA). In consistent with pure N, P-CQDs, the N, P-CQDs hydrogel also shows a dramatic fluorescence property with maximum emission wavelength of 440 nm, which can also be quenched after adsorbing iron ions (Fe3+). When the concentration of Fe3+is 0-6 mmol l-1, a better linear relationship between Fe3+concentration and the fluorescence intensities can be easily obtained. Additionally, the N, P-CQDs hydrogel exhibits better recyclability. This confirms that the N, P-CQDs hydrogel can be used for adsorbing and detecting Fe3+in aqueous with on-off-on mode. The fluorescence quenching mainly involves three procedures including the adsorption of Fe3+by hydrogel, integration of Fe3+with N, P-CQDs and the transportation of conjugate electrons in N, P-CQDs to the vacant orbits of Fe3+and the adsorption process follows a pseudo-second-order kinetic model confirmed in the Freundlich isotherm model. In conclusion, this work provides a novel route for synchronously removing and detecting the metal ions in aqueous by integrating N, P-CQDs with hydrogel with better recyclability.

Carbon Dots for the Treatment of Inflammatory Diseases: An Appraisal of In Vitro and In Vivo Studies

In recent decades, several studies demonstrating various applications of carbon dots (C-dots), including metal sensing, bioimaging, pH sensing, and antimicrobial activities, have been published. Recent developments have shifted this trend toward biomedical applications that target various biomarkers relevant to chronic diseases. However, relevant developments and research results regarding the anti-inflammatory properties of C-dots against inflammation-associated diseases have not been systematically reviewed. Hence, this review discusses the anti-inflammatory effects of C-dots in in vivo and in vitro models of LPS-induced inflammation, gout, cartilage tissue engineering, drug-induced inflammation, spinal cord injury, wound healing, liver diseases, stomach cancer, gastric ulcers, acute kidney and lung injury, psoriasis, fever or hypothermia, and bone tissue regeneration. The compiled studies demonstrate the promising potential of C-dots as anti-inflammatory agents for the development of new drugs.

Regulation of probe density on upconversion nanoparticles enabling high-performance lateral flow assays

Upconversion nanoparticles (UCNPs)-based fluorescence probes have shown great potential in point-of-care testing (POCT) applications, due to UCNPs' features of high photostability and background-free fluorescence. Ceaseless improvements of UCNPs-probes have been carried out to increase detection sensitivity and to broaden detection range of UCNPs-based POCT. In this paper, we optimized UCNPs-probes by regulating probe density. The optimization was verified by a traditional lateral flow assay (LFA) platform for C-reactive protein (CRP) detection. Further, the optimized UCNPs-LFA integrating with a home-made benchtop fluorescence analyzer holds the capability to achieve high-performance POCT. Finally, nearly a 20 times sensitivity enhancement with a limit of detection of 0.046 ng/mL and a broad detection range of 0.2-300 ng/mL for CRP detection was obtained. Moreover, the optimized UCNPs-LFA was applied to detecting CRP in clinical serum samples and the detection results were consistent with the clinical test, validating its clinical practicability. The proposed optimization method is also expected to optimize other nanoparticles-based bio-probes for wider POCT application.

Sensitive acid phosphatase assay based on light-activated specific oxidase mimic activity

Acid phosphatase (ACP) is a key marker in the diagnosis of many diseases. However, exploiting a simple and sensitive sensor for the real-time quantitative analysis of ACP is still challenging. Herein, we attempted to develop a sensitive colorimetric sensing strategy for the detection of ACP based on light-activated oxidase mimic property of carbon dots (CDs). The synthesized CDs were proved to be capable of intrinsic light-activated oxidase mimic activity, which could generate reactive oxygen species to oxidize chromogenic substrate under ultraviolet light stimulation. Interestingly, this light-activated oxidase mimic behavior would be effectively suppressed by the antioxidant ascorbic acid (AA), a product from the hydrolysis of 2-phospho-L-ascorbic acid trisodium (AAP) mediated by ACP. Based on the above property, a facile and sensitive colorimetric sensing method for ACP was developed. Under the optimal conditions, the linear range for ACP 0.1-5.5 U/L, and the detection limit was 0.056 U/L. Compared with conventional nanozyme based ACP assay systems, the catalytic activity of light-activated nanozyme could be conveniently regulated by switching the light on and off, which made it easier to precisely control the extent of the reaction and ensured the accuracy of the assay. In addition, the proposed sensing system would be readout directly by the naked eye or smartphone-based RGB analysis system, and have been successfully applied to analyze diluted in diluted fetal bovine serum and urine samples spiked with ACP. All these results indicated that this approach holds good promise for future applications in clinical analysis and point-of-care (POC) biosensor platforms.

A universal green approach for the synthesis of NPS-codoped carbon quantum dots with enhanced broad-spectrum antibacterial and antioxidant activities

Bio-inspired quantum dots have received widespread attention in recent years due to their great potential for biological applications. Herein, we report a one pot hydrothermal synthesis of nitrogen-phosphorus-sulphur (NPS)-codoped carbon quantum dots from endophytic bacteria without using any additional doping precursor. The synthesized CQDs were thoroughly characterized and interestingly found to have a graphene like structure. The synthesized CQDs were then utilized in bactericidal activities against Gram-negative bacteria like Salmonella typhi, Pseudomonas aeruginosa and Gram-positive bacteria like the Bacillus subtilis strain. The strains were treated with different concentrations ranging from 5-100 µg ml^-1. The 5 µg ml^-1 concentration appeared to be the MIC (minimum inhibitory concentration) and 100 µg ml^-1 is the MBC (minimum bactericidal concentration) maintaining a short incubation period of one hour. A simple, cost-effective and eco-friendly approach to synthesize multi-elemental doped CQDs would certainly cause the method to be used in future for diverse biological applications. As compared to the broadly used antibiotics, the developed CQDs have some added advantages including lower cytotoxicity, excellent photo-stability and high selectivity.

Cuprous oxide-demethyleneberberine nanospheres for single near-infrared light-triggered photoresponsive-enhanced enzymatic synergistic antibacterial therapy

In this work, novel cuprous oxide-demethyleneberberine (Cu₂O-DMB) nanomaterials are successfully synthesized for photoresponsive-enhanced enzymatic synergistic antibacterial therapy under near-infrared (NIR) irradiation (808 nm). Cu₂O-DMB has a spherical morphology with a smaller nanosize and positive ζ potential, can trap bacteria through electrostatic interactions resulting in a targeting function. Cu₂O-DMB nanospheres show both oxidase-like and peroxidase-like activities, and serve as a self-cascade platform, which can deplete high concentrations of GSH to produce O₂˙^- and H₂O₂, then H₂O₂ is transformed into ˙OH, without introducing exogenous H₂O₂. At the same time, Cu₂O-DMB nanospheres become photoresponsive, producing ¹O₂ and having an efficient photothermal conversion effect upon NIR irradiation. The proposed mechanism is that the generated ROS (O₂˙^-, ˙OH and ¹O₂) and hyperthermia can have synergetic effects for killing bacteria. Moreover, hyperthermia is not only beneficial for destroying bacteria, but also effectively enhances the efficiency of ˙OH production and accelerates GSH oxidation. Upon NIR irradiation, Cu₂O-DMB nanospheres exhibit excellent antibacterial ability against methicillin-resistant Staphylococcus aureus (MRSA) and ampicillin-resistant Escherichia coli (AREC) with low cytotoxicity and bare bacterial resistance, destroy the bacterial membrane causing an efflux of proteins and disrupt the bacterial biofilm formation. Animal experiments show that the Cu₂O-DMB + NIR group can efficiently treat MRSA infection and promote wound healing. These results suggest that Cu₂O-DMB nanospheres are effective materials for combating bacterial infections highly efficiently and to aid the development of photoresponsive enzymatic synergistic antibacterial therapy.

Nitrogen, sulfur, and phosphorus Co-doped carbon dots-based ratiometric chemosensor for highly selective sequential detection of Al3+ and Fe3+ ions in logic gate, cell imaging, and real sample analysis

Heteroatom-doped photoluminescent (PL) carbon dots (CDs) have recently gained attention as optical sensors due to their excellent tunable properties. In this work, we propose a one-pot hydrothermal synthesis of PL nitrogen (N), sulfur (S), and phosphorus (P) co-doped carbon dots (NSP-CDs) using glutathione and phosphoric acid (H₃PO₄) as precursors. The synthesized NSP-CDs were characterized using different spectroscopic and microscopic techniques, including ultraviolet-visible (UV-Vis) spectroscopy, fluorescence spectroscopy, Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. The NSP-CDs exhibited excellent PL properties with green emission at 492 nm upon excitation at 417 nm, a high quantum yield of 26.7%, and dependent emission behavior. The as-prepared NSP-CDs were spherical with a well-monodispersed average particle size of 5.2 nm. Moreover, NSP-CDs demonstrate high PL stability toward a wider pH, high salt ionic strength, and various solvents. Furthermore, the NSP-CDs showed a three-state "off-on-off" PL response upon the sequential addition of Al³⁺ and Fe³⁺ ions, with a low limit of detection (LOD) of 10.8 nM for Al³⁺ and 50.7 nM for Fe³⁺. The NSP-CD sensor can construct an INHIBIT logic gate with Al³⁺ and Fe³⁺ ions as the chemical inputs and emissions as the output mode. Owing to an excellent tunable PL property and biocompatibility, the NSP-CDs were applied for sensing Al³⁺ and Fe³⁺ ions as well as live cell imaging. Furthermore, NSP-CDs were designed as PL sensors for detecting Al³⁺ and Fe³⁺ ions in real water show their potential application.

Detection of Glucose Based on Noble Metal Nanozymes: Mechanism, Activity Regulation, and Enantioselective Recognition

Glucose monitoring is essential to evaluate the degree of glucose metabolism disorders. The enzymatic determination has been the most widely used method in glucose detection because of its high efficiency, accuracy, and sensitivity. Noble metal nanomaterials (NMs, i.e., Au, Ag, Pt, and Pd), inheriting their excellent electronic, optical, and enzyme-like properties, are classified as noble metal nanozymes (NMNZs). As the NMNZs are often involved in two series of reactions, the oxidation of glucose and the chromogenic reaction of peroxide, here the chemical mechanism by employing NMNZs with glucose oxidase (GOx) and peroxidase (POD) mimicking activities is briefly summarized first. Subsequently, the regulation strategies of the GOx-like, POD-like and tandem enzyme-like activities of NMNZs are presented in detail, including the materials, size, morphology, composition, and the reaction condition of the representative NMs. In addition, in order to further mimic the enantioselectivity of enzyme, the design of NMNZs with enantioselective recognition of d-glucose and l-glucose by using different chiral compounds (DNA, amino acids, and cyclodextrins) and molecular imprinting is further described in this review. Finally, the feasible solutions to the existing challenges and a vision for future development possibilities are discussed.

Nanozyme's catalytic activity at neutral pH: reaction substrates and application in sensing

Nanozymes exhibit their great potential as alternatives to natural enzymes. In addition to catalytic activity, nanozymes also need to have biologically relevant catalytic reactions at physiological pH to fit in the definition of an enzyme and to achieve efficient analytical applications. Previous reviews in the nanozyme field mainly focused on the catalytic mechanisms, activity regulation, and types of catalytic reactions. In this paper, we discuss efforts made on the substrate-dependent catalytic activity of nanozymes at neutral pH. First, the discrepant catalytic activities for different substrates are compared, where the key differences are the characteristics of substrates and the adsorption of substrates by nanozymes at different pH. We then reviewed efforts to enhance reaction activity for model chromogenic substrates and strategies to engineer nanomaterials to accelerate reaction rates for other substrates at physiological pH. Finally, we also discussed methods to achieve efficient sensing applications at neutral pH using nanozymes. We believe that the nanozyme is catching up with enzymes rapidly in terms of reaction rates and reaction conditions. Designing nanozymes with specific catalysis for efficient sensing remains a challenge.

Intrinsic Light-Activated Oxidase Mimicking Activity of Conductive Polyaniline Nanofibers: A Class of Metal-Free Nanozyme

In recent decades, studies have focused on inorganic nanozymes to overcome the intrinsic drawbacks of bioenzymes due to the demands of improving the reaction conditions and lack of robustness to harsh environmental factors. Many biochemical reactions catalyzed by enzymes require light activation. Light-activated nanozymes have distinct advantages, including being regulated by light stimuli, activating the molecular oxygen to produce reactive oxygen species (ROS) without interfering supplementary oxidants, and often showing a synergistic effect to catalyze some challenging reactions. Only a few studies have been done on this connection. Therefore, it is still a big challenge to develop a nanozyme regulated by light activation. Herein, we uncovered the light-activated oxidase mimicking activity of a conducting polymer polyaniline nanofibers (PANI-NFs). PANI-NFs exhibit intrinsic light-activated brilliant oxidase-like activity, can catalyze the colorless tetramethyl benzidine (TMB) to produce a blue product TMBox, and have a distinct K_m = 0.087 mM and a high V_max = 2.32 μM min^-1 value, measured by using Hanes-Woolf kinetics. We also report the light-activated oxidase activity of some other renowned carbocatalysts graphene oxide and graphitic carbon nitride and compare them with PANI-NFs. This type of property shown by the conductive polymer is amazing. The density functional theory is used to verify the stability and the mode of adsorption of the PANI NFs-TMB composite, which corroborates the experimental results. Furthermore, the current nanozyme demonstrated a significant ability to kill both Gram-negative and Gram-positive bacteria as well as effectively destroy biofilms under physiological conditions. We believe that this work provides the motivation to create a link between optoelectronics and biological activity in the near future.

Disrupting biofilm and eradicating bacteria by Ag-Fe3O4@MoS2 MNPs nanocomposite carrying enzyme and antibiotics

In this study, novel multilayered magnetic nanoparticles (ML-MNPs) loaded with DNase and/or vancomycin (Vanc) were fabricated for eliminating multispecies biofilms. Iron-oxide MNPs (IO-core) (500-800 nm) were synthesized via co-precipitation; further, the IO-core was coated with heavy-metal-based layers (Ag and MoS₂ NPs) using solvent evaporation. DNase and Vanc were loaded onto the outermost layer of the ML-MNP formed by nanoporous MoS₂ NPs through physical deposition and adsorption. The biofilms of S. mutans or E. faecalis (or both) were formed in a brain-heart-infusion broth (BHI) for 3 days, followed by treatment with ML-MNPs for 24 h. The results revealed that coatings of Ag (200 nm) and ultrasmall MoS₂ (20 nm) were assembled as outer layers of ML-MNPs successfully, and they formed Ag-Fe₃O₄@MoS₂ MNPs (3-5 μm). The DNase-Vanc-loaded MNPs caused nanochannels digging and resulted in the enhanced penetration of MNPs towards the bottom layers of biofilm, which resulted in a decrease in the thickness of the 72-h biofilm from 48 to 58 μm to 0-4 μm. The sustained release of Vanc caused a synergistic bacterial killing up to 96%-100%. The heavy-metal-based layers of MNPs act as nanozymes to interfere with bacterial metabolism and proliferation, which adversely affects biofilm integrity. Further, loading DNase/Vanc onto the nanoporous-MoS₂-layer of ML-MNPs promoted nanochannel creation through the biofilm. Therefore, DNase-and Vanc-loaded ML-MNPs exhibited potent effects on biofilm disruption and bacterial killing.

"Two-in-one" sulfur and nitrogen co-doped fluorescent silicon nanoparticles: Simultaneous as the fluorescent probe and photocatalyst for in-situ real time visual monitoring and degradation of tetracycline antibiotics

Detection and removal of contaminants are significant for environmental monitoring and remediation. In the present study, "two-in-one" silicon nanoparticles (SiNPs) were designed and prepared to simultaneously act as the fluorescent probe and degradation catalyst to detect and remove tetracycline (TCs) antibiotics. Thiourea and 3-aminopropyltrimethoxysilane were dopant and silicon source to generate fluorescent sulfur and nitrogen co-doped SiNPs (SN-SiNPs). The blue fluorescence of SN-SiNPs was selectively quenched by TCs due to the inner filter effect, whilst accompanied by the newly appeared yellow-green fluorescence resulting from aggregation induced fluorescence emission effect. Based on this phenomenon, SN-SiNPs can be used as fluorescent colorimetric probes for detection of doxycycline, oxytetracycline and tetracycline with limits of detection of 1.8 μg/L, 3.0 μg/L and 4.2 μg/L, respectively; the semi-quantitation can even be visually achieved by naked eyes. Particularly, SN-SiNPs were capable to catalyze the degradation of the three TCs effectively, achieving the removal rates of doxycycline, oxytetracycline and tetracycline of >90 %, >80 % and > 70 % after 240 min exposure to UV light. The catalytic ability of SN-SiNPs was derived from hydroxyl radical (•OH^-), superoxide radical (•O₂^-) and singlet oxygen (¹O₂) produced by SN-SiNPs under UV irradiation. Moreover, integrating the fluorescent probe and photocatalyst together, the proposed SN-SiNPs simultaneously realized catalyzing the degradation of the three TCs and in-situ visually monitoring of the degradation process in real time. This study innovatively proposed an integrated probe for the detection and catalytic degradation of TCs, providing a new "two-in-one" strategy for rapid and simple detection and removal of drug pollutants.

Dual-mode colorimetric-photothermal sensing platform of acetylcholinesterase activity based on the peroxidase-like activity of Fe-N-C nanozyme

Sensors based on colorimetry, fluorescence, and electrochemistry have been widely employed to detect acetylcholinesterase and its inhibitors, however, there are only a minority of strategies for AChE detection based on photothermal method. This work reports a versatile dual-mode colorimetric and photothermal biosensing platform for acetylcholinesterase (AChE) detection and its inhibitor (paraoxon-ethyl, a model of AChE inhibitors) monitor based on Fe-N-C/H₂O₂/3,3',5,5'-tetramethylbenzidine (TMB) system. The Fe-N-C with abundant active Fe-Nx sites shows outstanding peroxidase-mimicking activity and can be used to promote the generation of •OH by H₂O₂ to oxidize TMB. However, the introduction of mercapto molecules tending to coordinate with metal atoms result in the block of action site in Fe-N-C, thereby decrease its peroxidase-mimetic activity. The designed biosensor principle is based on the block of active sites of Fe-N-C by thiocholine (TCh, one kind of mercapto molecules) that can be produced by acetylthiocholine (ATCh) in the presence of AChE. Under optimum conditions, the limit of detection (LOD) for AChE activity is 1.9 mU mL^-1 (colorimetric) and 2.2 mU mL^-1 (photothermal), while for paraoxon-ethyl is 0.012 μg mL^-1 (colorimetric) and 0.013 μg mL^-1 (photothermal), respectively. The assay we proposed not only can be designed to monitor AChE detection and its inhibitors, but also can be easily extended for the detection of other biomolecules relate to the generation or consumption of H₂O₂.

Emerging bioanalytical sensors for rapid and close-to-real-time detection of priority abiotic and biotic stressors in aquaculture and culture-based fisheries

Abiotic stresses of various chemical contamination of physical, inorganic, organic and biotoxin origin and biotic stresses of bacterial, viral, parasitic and fungal origins are the significant constraints in achieving higher aquaculture production. Testing and rapid detection of these chemical and microbial contaminants are crucial in identifying and mitigating abiotic and biotic stresses, which has become one of the most challenging aspects in aquaculture and culture-based fisheries. The classical analytical techniques, including titrimetric methods, spectrophotometric, mass spectrometric, spectroscopic, and chromatographic techniques, are tedious and sometimes inaccessible when required. The development of novel and improved bioanalytical methods for rapid, selective and sensitive detection is a wide and dynamic field of research. Biosensors offer precise detection of biotic and abiotic stressors in aquaculture and culture-based fisheries within no time. This review article allows filling the knowledge gap for detection and monitoring of chemical and microbial contaminants of abiotic and biotic origin in aquaculture and culture-based fisheries using nano(bio-) analytical technologies, including nano(bio-)molecular and nano(bio-)sensing techniques.

Mercury (Hg2+) Detection in Aqueous Media, Photocatalyst, and Antibacterial Applications of CdTe/ZnS Quantum Dots

In the present work, CdTe/ZnS high luminescence quantum dots (QDs) were synthesized by a facile, fast, one-pot, and room temperature photochemical method. Synthesized QDs were characterized by different structural and optical analyses such as X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform-infrared spectroscopy (FT-IR), Raman, photoluminescence (PL) and UV-visible (UV-vis) spectroscopies. The results confirmed the successful growth of the ZnS shell and formation of CdTe/ZnS core/shell structure. CdTe/ZnS prepared QDs indicated a PL quantum yield of about 51%. These high luminescence QDs were used for detection of Hg²⁺ ions in aqueous media, as catalyst for photodegradation of different organic dyes, and as antibacterial material for the inhibition of bacterial growth. PL intensity of the CdTe/ZnS QDs was completely quenched after addition of 1 m molar Hg²⁺in to the media. Photocatalyst activity of CdTe/ZnS QDs was studied by rhodamine b, methylene blue, and methylene orange as organic dyes under both the sun and UV illuminations, and results showed that CdTe/ZnS QDs had the best photocatalyst activity for methylene blue degradation under UV irradiation and radical scavenger results indicated that electrons have a main role in photodegradation of methylene blue dye by CdTe/ZnS QDs under UV illumination. Antibacterial effects of CdTe/ZnS QDs evaluated by Minimum Inhibitory Concentration (MIC), and Minimum Bactericidal Concentration (MBC) methods against two strains of bacteria. The results of the antibacterial test showed that CdTe/ZnS could inhibit bacterial growth in Bacillus cereus (Gram-positive) and Escherichia coli (Gram-negative G) bacteria.

Recent Trends in Composite Nanozymes and Their Pro-Oxidative Role in Therapeutics

Nanozymes are inorganic nanostructures whose enzyme mimic activities are increasingly explored in disease treatment, taking inspiration from natural enzymes. The catalytic ability of nanozymes to generate reactive oxygen species can be used for designing effective antimicrobials and antitumor therapeutics. In this context, composite nanozymes are advantageous, particularly because they integrate the properties of various nanomaterials to offer a single multifunctional platform combining photodynamic therapy (PDT), photothermal therapy (PTT), and chemodynamic therapy (CDT). Hence, recent years have witnessed great progress in engineering composite nanozymes for enhanced pro-oxidative activity that can be utilized in therapeutics. Therefore, the present review traverses over the newer strategies to design composite nanozymes as pro-oxidative therapeutics. It provides recent trends in the use of composite nanozymes as antibacterial, antibiofilm, and antitumor agents. This review also analyzes various challenges yet to be overcome by pro-oxidative composite nanozymes before being used in the field.

N-Doped Carbon Nanorods from Biomass as a Potential Antidiabetic Nanomedicine

Insufficient glucose control remains a critical challenge for type 2 diabetes mellitus (T2DM) patients with currently used therapeutic drugs, which can also have detrimental side effects. The facile synthesis of nitrogen-doped carbon nanorods (N-CNRs) as therapeutic agents in a T2DM transgenic db/db mouse model is reported herein. N-CNRs are synthesized from silkworm powder without the assistance of any template and possess a hollow graphitic nature, rough surface, and good aqueous solubility, which make them ideal candidates for fabricating nanomedicines. N-CNRs are employed to reduce fasting blood glucose and ameliorate serum biomarker levels linked to oxidative stress and inflammation. Interestingly, through the downregulation of enhanced expression of glutathione peroxidase, superoxide dismutase, and catalase as well as inflammatory responses, N-CNRs reverse pancreatic dysfunction and normalize the secretory functions of pancreatic cells. Moreover, hepatic steatosis is attenuated by downregulating lipogenesis and increasing fatty acid oxidation. This finding may help in designing novel therapeutics for T2DM treatment.

N, S-co-doped carbon/Co1-xS nanocomposite with dual-enzyme activities for a smartphone-based colorimetric assay of total cholesterol in human serum

We fabricated a novel N,S-co-doped carbon/Co_1-xS nanocomposite (NSC/Co_1-xS) using a facile sol-gel approach, which featured a multiporous structure, abundant S vacancies and Co-S nanoparticles filling the carbon-layer pores. When the Co_1-xS nanoparticles were anchored onto the surface of N,S-co-doped carbon, a synergistic catalysis action occurred. The NSC/Co_1-xS nanocomposites possessed both peroxidase-like and oxidase-mimetic dual-enzyme activities, in which the oxidase-mimetic activity dominated. By scavenger capture tests, the nanozyme was demonstrated to catalyze H₂O₂ to produce h⁺, •OH and •O₂^-, among which the strongest and weakest signals were h⁺ and •OH, respectively. The multi-valence states of Co atoms in the NSC/Co_1-xS structure facilitated electronic transfer that enhanced redox reactions, thereby improving the resultant color reaction. Based on the NSC/Co_1-xS's enzyme-mimetic catalytic reaction, a visual colorimetric assay and Android "Thing Identify" application (app), installed on a smartphone, offered detection limits of 1.93 and 2.51 mg/dl, respectively, in human serum samples. The selectivity/interference experiments, using fortified macromolecules and metal ions, demonstrated that this sensor had high selectivity and low interference potential for cholesterol analysis. Compared to standard assay kits and previously reported visual detection, the Android smartphone-based assays provided higher accuracy (recoveries up to 93.6-104.1%), feasibility for trace-level detection, and more convenient on-site application for cholesterol assay due to the superior enzymatic activity of NSC/Co_1-xS. These compelling performance metrics lead us to posit that the NSC/Co_1-xS-based nanozymic sensor offers a promising methodology for several practical applications, such as point-of-care diagnosis and workplace health evaluations.

Comparison of Disinfection By-Product Formation and Distribution during Breakpoint Chlorination and Chlorine-Based Disinfection in Drinking Water

Breakpoint chlorination (BC) and disinfection with chlorine-based disinfectant are widely used procedures in drinking water production. Both involve dosing chlorine into the raw water, where it can react with organic compounds, forming disinfection by-products (DBPs) of health concern. However, technological parameters (e.g., contact time, chlorine dosage, and bromide to residual free chlorine ratio) of the two chlorination procedures are different, which can lead to differences in DBP formation. To better understand this, a year-long sampling campaign was carried out at three waterworks in Hungary, where both BC and chlorine disinfection are used. To confirm the results of the field sampling, bench-scale experiments were carried out, investigating the impact of (a) bromide concentration in raw water, (b) residual free chlorine (bromide to residual chlorine ratio), and (c) contact time on DBP formation. The measured DBPs were trihalomethanes (THMs), haloacetic acids (HAAs), haloacetonitriles (HANs), and chlorate. During BC, the DBPs were formed in higher concentration, with the exception of one waterwork having elevated bromide content in the raw water. Bromine substitution factors (BSFs) were significantly higher during disinfection than BC in both field and laboratory experiments. After BC, the chlorate concentration range was 0.15–1.1 mg/L, and 96% of the samples exceeded the European Union (EU) parametric value (0.25 mg/L), whereas disinfection contributed only slightly. Granular activated carbon (GAC) filters used to remove DBPs in waterworks were exhausted after 6–8 months of use, first for those chlorinated THMs, which are generated predominantly during BC. The biological activity of the filters started to increase after 3–6 months of operation. This activity helps to remove the biodegradable compounds, such as disubstituted haloacetic acid (DHAAs) and HANs, even if the adsorption capacity of the GAC filters are low.

Insights into the Antibacterial Activity of Prolactin-Inducible Protein against the Standard and Environmental MDR Bacterial Strains

Background: Prolactin inducible protein (PIP) is a small secretary glycoprotein present in most biological fluids and contributes to various cellular functions, including cell growth, fertility, antitumor, and antifungal activities. Objectives: The present study evaluated the antibacterial activities of recombinant PIP against multiple broad-spectrum MDR bacterial strains. Methods: The PIP gene was cloned, expressed and purified using affinity chromatography. Disk diffusion, broth microdilution, and growth kinetic assays were used to determine the antibacterial activities of PIP. Results: Disk diffusion assay showed that PIP has a minimum and maximum zone of inhibition against E. coli and P. aeruginosa, respectively, compared to the reference drug ampicillin. Furthermore, growth kinetics studies also suggested that PIP significantly inhibited the growth of E. coli and P. aeruginosa. The minimum inhibitory concentration of PIP was 32 µg/mL for E. coli (443), a standard bacterial strain, and 64 µg/mL for Bacillus sp. (LG1), an environmental multidrug-resistant (MDR) strain. The synergistic studies of PIP with ampicillin showed better efficacies towards selected bacterial strains having MDR properties. Conclusion: Our findings suggest that PIP has a broad range of antibacterial activities with important implications in alleviating MDR problems.

Catalytic antimicrobial therapy using nanozymes

Nanozymes are nanomaterials with enzyme-like characteristics, which catalyze the conversion of enzyme substrates and follow enzymatic kinetics under physiological conditions. As a new generation of artificial enzymes, nanozymes provide alternative approaches for those upon enzymatic catalysis. Compared with natural enzymes, nanozymes have the advantages of simple preparation, good stability and low cost, which makes nanozymes promising for application in many fields, such as antimicrobial infection treatment. Many studies have reported that nanozymes are capable of killing a number of pathogenic bacteria with resistance, fungi as well as viruses, and have shown great curative effects for diseases caused by these pathogens. Herein, we summarize the application of nanozymes for antibacterial, antiviral, and antifungal therapies and outline the issues needing resolution in the future. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Fluorescence "off-on" probe for lead (II) detection based on Atractylodes III CQDs and bioimaging

In this work, a type of carbon quantum dots (CQDs) with bright blue emission were readily fabricated through one-step hydrothermal treatment from Atractylodes III. We explored the surface morphology and optical properties of CQDs by Transmission electron microscope (TEM), X-ray diffraction patterns (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and UV-vis spectrophotometer. The obtained CQDs possessed good photoluminescence properties, water solubility and biocompatibility. The fluorescence quantum yield of them was 3.72%. It was found that the fluorescence intensity of CQDs will be quenched by picric acid (PA). After adding lead (II), the fluorescence can be effectively recovered. Hence, an "off-on" fluorescence probe was designed to detect lead (II) in the range of 0-580 μM and the limit of detection (LOD) was 0.068 μM. In the meanwhile, the experiments showed that the CQDs can be successfully used in bioimaging and as a hidden fluorescent ink.

Highly sensitive and selective detection of butachlor based on the resonance light scattering of doped carbon quantum dots

In this work, a new method of resonance light scattering was developed for the sensitive and selective detection of butachlor. Firstly, buckwheat was used as the main carbon source to prepare a new type of doped carbon quantum dot using the hydrothermal method. A new method for the determination of butachlor was then established by the change in resonance light scattering intensity after the addition of butachlor into the doped carbon quantum dot solution. The detection effect was successfully optimized by investigating the optimum reaction conditions. Under the optimum conditions, the resonance light scattering intensity of doped carbon quantum dots was greatly enhanced at 460 nm after the addition of butachlor, and the intensity changes were linearly correlated with the butachlor concentration in the range of 1-7 μg L^-1. The detection limit was 0.136 μg L^-1, and the recoveries ranged between 98.6% and 101.8%. This method was also used for butachlor detection in environmental water.

Carbon Nanomaterials (CNMs) and Enzymes: From Nanozymes to CNM-Enzyme Conjugates and Biodegradation

Carbon nanomaterials (CNMs) and enzymes differ significantly in terms of their physico-chemical properties—their handling and characterization require very different specialized skills. Therefore, their combination is not trivial. Numerous studies exist at the interface between these two components—especially in the area of sensing—but also involving biofuel cells, biocatalysis, and even biomedical applications including innovative therapeutic approaches and theranostics. Finally, enzymes that are capable of biodegrading CNMs have been identified, and they may play an important role in controlling the environmental fate of these structures after their use. CNMs’ widespread use has created more and more opportunities for their entry into the environment, and thus it becomes increasingly important to understand how to biodegrade them. In this concise review, we will cover the progress made in the last five years on this exciting topic, focusing on the applications, and concluding with future perspectives on research combining carbon nanomaterials and enzymes.

3D Modeling of Silver Doped ZrO2 Coupled Graphene-Based Mesoporous Silica Quaternary Nanocomposite for a Nonenzymatic Glucose Sensing Effects

We described the novel nanocomposite of silver doped ZrO2 combined graphene-based mesoporous silica (ZrO2-Ag-G-SiO2,) in bases of low-cost and self-assembly strategy. Synthesized ZrO2-Ag-G-SiO2 were characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, Nitrogen adsorption-desorption isotherms, X-ray photoelectron spectroscopy (XPS), and Diffuse Reflectance Spectroscopy (DRS). The ZrO2-Ag-G-SiO2 as an enzyme-free glucose sensor active material toward coordinate electro-oxidation of glucose was considered through cyclic voltammetry in significant electrolytes, such as phosphate buffer (PBS) at pH 7.4 and commercial urine. Utilizing ZrO2-Ag-G-SiO2, glucose detecting may well be finished with effective electrocatalytic performance toward organically important concentrations with the current reaction of 9.0 × 10-3 mAcm-2 and 0.05 mmol/L at the lowest potential of +0.2 V, thus fulfilling the elemental prerequisites for glucose detecting within the urine. Likewise, the ZrO2-Ag-G-SiO2 electrode can be worked for glucose detecting within the interferometer substances (e.g., ascorbic corrosive, lactose, fructose, and starch) in urine at proper pH conditions. Our results highlight the potential usages for qualitative and quantitative electrochemical investigation of glucose through the ZrO2-Ag-G-SiO2 sensor for glucose detecting within the urine concentration.

Preparation and photodynamic antibacterial/anticancer effects of ultralong-lifetime room-temperature phosphorescent N-doped carbon dots

Room-temperature phosphorescent (RTP) N-doped carbon-dots (CNDs) featuring eco-friendliness, low cost and high biocompatibility, are ideal photodynamic antibacterial and anticancer nanomaterials. However, the existing CNDs are limited by low singlet oxygen (¹O₂) quantum yield, which has become a bottleneck in the development of CNDs. One basic reason is the short T₁-state exciton lifetime of CNDs. Herein, triethylenetetramine hexaacetic acid was used to synthesize CNDs via a one-step hydrothermal method. CNDs are characterized with low toxicity, high biocompatibility and ultralong-lifetime RTP (URTP). In addition to the URTP (average lifetime 414 ms) under solid conditions, CNDs even had URTP (average lifetime 320 ms) in a water environment. The ultralong T₁ exciton lifetime largely extends the collision time between T₁ state excitons and O₂ and prolongs the energy transfer time, not only improving the quantum yield (0.63) of singlet oxygen (¹O₂) in solution, but also facilitating the photodynamic antibacterial and anticancer effects.

The URTP CNDs largely extends the collision time between T₁ state exciton and O₂, which improve quantum yield of singlet oxygen (¹O₂) in solutions, facilitating the photodynamic antibacterial and anticancer effects.

One-step facile preparation of carbon dots with high fluorescence quantum yield and application in rapid latent fingerprint detection

The development of luminescent materials greatly affects the development of fluorescence imaging technology. The preparation of carbon dots (CDs) with high photoluminescence quantum yield (PLQY) in the solid-state is challenging due to excessive resonance energy transfer (RET) and direct π–π interactions. In this study, we synthesized carbon dots that exhibit green fluorescence (GCDs) with absolute PLQYs up to 35.65% in one step by a microwave-assisted method. In the solid-state, the absolute PLQY reached 19.25%. Then, the GCDs were mixed with soluble starch in appropriate proportions, which improved the adsorption and dispersion of the GCDs and greatly reduced the cost of the fingerprint powder, and increased the absolute PLQY of the fingerprint powder to 41.75%. Finally, we prepared GCDs for preliminary fabrication of luminescent films, and the GCD-starch powder was successfully applied to high-quality latent fingerprint (LFP) imaging. The related properties of GCDs and the LFP detection performance of fingerprint detection powders prepared by GCDs were studied in detail. The results showed that the LFP system developed with GCDs-starch powder visualized LFPs with high definition and contrast under different conditions, and GCDs had potential for application in light-emitting devices. This study developed a new type of solid-state luminescent CDs and demonstrated that these GCDs have great application potential for LFP detection. This study may also provide inspiration for other applications based on efficient solid-state fluorescence.

The development of luminescent materials greatly affects the development of fluorescence imaging technology.

Photocatalytic activity study of ZnO modified with nitrogen–sulfur co-doped carbon quantum dots under visible light

Enhanced degradation rate of RhB under visible light by N,S-CQDs-modified ZnO.