Surface Pore Engineering of Covalent Organic Frameworks for Ammonia Capture through Synergistic Multivariate and Open Metal Site Approaches

"Turn-on" mode fluorescence detection of amines based on a cationic covalent organic framework linked with C-C single bond

Developing methods to detect amine pollutants at trace levels is urgently needed due to their high toxicity to both human health and environment. Covalent organic frameworks (COFs) have emerged as promising candidates for amine sensing due to their exceptional stability when exposed to corrosive amines. While several COF-based sensors have recently been developed for amine detection, to the best of our knowledge, fluorescent "turn-on" sensors have been limited to imine-linked COFs. However, the relatively low stability of imine linkages may compromise structural integrity in the presence of corrosive amines. Here, for the first time, we constructed a cationic C-C single bond linked COF (CSBL-COF-4) through the reaction between cationic porphyrin TMPyP and terephthaldicarboxaldehyde. The abundant cationic sites distributing throughout the networks not only improved the dispersity of CSBL-COF-4 in aqueous solution but also provided numerous acidic sites to enhance the affinity with alkaline amines via Lewis acid-base interaction. CSBL-COF-4 exhibited an efficient response to amine solutions or vapors and was further utilized to evaluate the freshness of meat samples, highlighting its potential for practical applications. Our result would thus open up a new avenue towards constructing a broader class of COF-based sensors for the fluorescence "turn-on" detection of amines.

Shielding CO2-Philic Sites in Trimmed Covalent Organic Framework Pores by Atomic Layer Deposition

Strong adsorptive sites toward unwanted gas molecules in porous framework materials often lead to reversed sorption selectivity, creating tremendous challenges for enhancing the diffusion-driven membrane separations targeted at the weakly adsorbed species in the gas pair. While post-synthetic modification methods have been reported to downsize the pores in covalent organic frameworks (COFs), effective approaches to shield the highly adsorptive sites within the pores are rarely explored. Here, a solvent-less pore modification strategy is developed using atomic layer deposition (ALD). it is shown that controlled amounts of ZnO can be uniformly deposited into the COF pores, offering the ability to fine-tune the pore dimensions. Moreover, the Zn─O moieties grown into the COF pore are found to interact with the CO2-philic ketoenamine groups, and substantially reduce the CO2 solubility by 72.4% in the COF membrane. Accordingly, the simultaneously increased diffusion selectivity and sorption selectivity for H2/CO2 lead to a 330% improvement of the permselectivity in membrane separation, demonstrating the efficacy of the strategy for pore engineering in COFs.

The Development Prospects and Potential of High Specific Surface Area Materials: A Review of the Use of Porous Framework Materials for the Capture and Filtration of Ammonia

Ammonia is one of the most widely produced inorganic chemicals, with extensive applications in the military, agricultural, and industrial sectors. However, its strong stimulation and corrosive properties pose significant health risks, as long-term exposure to ammonia environments can lead to respiratory tract damage, loss of consciousness, and even cardiopulmonary dysfunction. Over the years, researchers have focused on exploring suitable materials for ammonia adsorption fields such as activated carbon and zeolites. Porous framework materials (PFMs), including metal-organic frameworks, covalent organic frameworks, and hydrogen-bonded organic frameworks, have emerged as possible ammonia adsorption materials due to their high specific surface area, pore size, and structural adjustability. This review focuses on the research and application of materials with excellent adsorption based on PFMs for ammonia adsorption, highlighting their potential applications and providing insights into future developments in this field.

Ultrastable Imidazole-linked Porous Organic Cages for Ammonia Capture and Detection

Here, we report the facile synthesis of imidazole-linked porous organic cages (IPOCs) via an in situ cyclization reaction protocol. Specifically, three IPOCs with [2+4] lantern-like structures and one with a [3+6] triangular prism structure were successfully prepared through condensation reactions between tetraformyl-functionalized calix[4]arene and bis(o-phenylenediamine) monomers in a single pot. Notably, these IPOCs exhibit high porosity, with Brunauer-Emmett-Teller (BET) specific surface areas reaching up to 1162 m2 g-1. Moreover, they demonstrate excellent chemical stability in both strong acidic and alkaline solutions. Furthermore, IPOC-2 and IPOC-4 display a remarkable NH3 capturing capability, with uptakes of up to 11.5 mmol g-1 at 1 bar and 298 K, surpassing most reported porous organic materials. Additionally, IPOC-1 exhibits highly efficient fluorescent quenching sensing of aqueous NH3, with a detection limit as low as 3.35×10-6 M. These findings strongly suggest the potential for widespread use of imidazole linkages in the development of robust functional porous organic cage materials for diverse applications.

Boosting Photoconductivity by Increasing the Structural Complexity of Multivariate Covalent Organic Frameworks

The assessment of the photoconductivity of Donor-Acceptor (D-A) ordered bulk heterojunctions is gaining attention for the development of innovative organic semiconductors in optoelectronics. Here, the synthesis of pyrene-based (D) Covalent Organic Frameworks, achieve through a multivariate reaction involving two distinct acceptors is reported (A). The products are characterized using powder x-ray diffraction, N2 sorption isotherms, electronic microscopy, and in silico calculations, among other techniques. These characterizations reveal that the multicomponent synthesis enables the modification of properties (e.g., bandgap) of the framework while preserving its structural features, such as crystallinity and porosity. The ordered D-A arrays position these materials as promising candidates for photoconductive semiconductors, particularly regarding the variation in the composition of isotopological frameworks. Photoconductivity experiments demonstrate a volcano-type correlation with respect to the A moiety content, with the optimal value reaching 7.9 × 10-5 cm2 V-1 s-1 for the bare NIP25%-COF. This study illustrates how introducing diverse acceptor units through multivariate synthesis can enhance the photoconductivity of these materials via "defect" engineering, without sacrificing their crystalline or porous characteristics and avoiding the need for de novo synthesis.

A comprehensive review of covalent organic frameworks (COFs) and their derivatives in environmental pollution control

Covalent organic frameworks (COFs) have gained considerable attention due to their design possibilities as the molecular organic building blocks that can stack in an atomically precise spatial arrangement. Since the inception of COFs in 2005, there has been a continuous expansion in the product range of COFs and their derivatives. This expansion has led to the evolution of three-dimensional structures and various synthetic routes, propelling the field towards large-scale preparation of COFs and their derivatives. This review will offer a holistic analysis and comparison of the spatial structure and synthesis techniques of COFs and their derivatives. The conventional methods of COF synthesis (i.e., ultrasonic chemical, microwave, and solvothermal) are discussed alongside the synthesis strategies of new COFs and their derivatives. Furthermore, the applications of COFs and their derived materials are demonstrated in air, water, and soil pollution management such as gas capture, catalytic conversion, adsorption, and pollutant removal. Finally, this review highlights the current challenges and prospects for large-scale preparation and application of new COFs and the derived materials. In line with the United Nations Sustainable Development Goals (SDGs) and the needs of digital-enabled technologies (AI and machine learning), this review will encompass the future technical trends for COFs in environmental pollution control.

Perfluoroalkyl Functionalized Superhydrophobic Covalent Organic Frameworks for Excellent Oil-Water Membrane Separation and Anhydrous Proton Conduction

Rapid economic development has led to oil pollution and energy shortage. Membrane separation has attracted much attention due to its simplicity and efficiency in oil-water-separation. The development of membrane materials with enhanced separation properties is essential to improve the separation-efficiency. Proton exchange membrane fuel cells (PEMFCs) are expected to replace conventional engines due to their high-power-conversion rates and other favorable properties. Anhydrous-proton-conducting materials are vital components of PEMFCs. However, developing stable proton-conducting materials that exhibit high conductivity at varying temperatures remains challenging. Herein, two covalent organic frameworks (COFs) with long-side-chains are synthesized, and their corresponding COF@SSN membranes. Both membranes can effectively separate oil-water mixtures and water-in-oil emulsions. The TFPT-AF membrane achieves a maximum oil-flux of 6.05 × 105 g h-1 m-2 with an oil-water separation efficiency of above 99%, which is almost unchanged after 20 consecutive uses. COF@H3PO4 doped with different ratios of H3PO4 is prepared, the results show that the perfluorocarbon-chain system has  excellent anhydrous proton conductivity , achieving an ultra-high proton-conductivity of 3.98 × 10-1 S cm-1 at 125 °C. This study lays the foundation for tailor-made-functionalization of COF through pre-engineering and surface-modification, highlighting the great potential of COFs for oil-water separation and anhydrous-proton-conductivity.

Ligand effects on gas adsorption in nanoporous phthalocyanine crystals

X-ray diffraction is used to study the sorption of CO and NO in two phthalocyanine nanoporous crystals (PNCs) with 4,4' bipyridine or 4,4' bipyrimidine trans coordinated to open Co2+ sites, demonstrating how the trans coordinated ligands influence the gas sorption properties and structures of the PNCs.

Application and Challenge of Metal/Covalent Organic Frameworks in Ammonia Sorption and Separation

As both a critical chemical feedstock and an environmental pollutant, the production and utilization of ammonia (NH3) are accompanied by the progress of social civilization. In recent years, research on metal/covalent organic framework materials as NH3 adsorbents has attracted increasing attention due to their high porosity, versatile architecture and tunable functionality. This review was organized to highlight the recent advancement of MOF/COF materials for NH3 sorption, which successively presented the key properties of solid adsorbents and summarized the strategies along with their mechanisms for enhancing NH3 adsorption. In addition, perspectives and outlook regarding the future development of MOF/COF-based NH3 adsorbents were outlined to meet the requirements of practical applications under various condition.

Efficient Capture and Low Energy Release of NH3 by Azophenol Decorated Photoresponsive Covalent Organic Frameworks

In NH3 capture technologies, the desorption process is usually driven by high temperature and low pressure (such as 150-200 °C under vacuum), which accounts for intensive energy consumption and CO2 emission. Developing light responsive adsorbent is promising in this regard but remains a great challenge. Here, we for the first time designed and synthesized a light responsive azophenol-containing covalent organic framework (COF), COF-HNU38, to address this challenge. We found that at 25 °C and 1.0 bar, the cis -COF exhibited a NH3 uptake capacity of 7.7 mmol g-1 and a NH3/N2 selectivity of 158. In the adsorbed NH3, about 29.0 % could be removed by vis-light irradiated cis-trans isomerization at 25 °C, and the remaining NH3 might be released at 25 °C under vacuum. Almost no decrease in adsorption capacity was observed after eight adsorption-desorption cycles. As such, an efficient NH3 capture and low energy release strategy was established thanks to the multiple hydrogen bond interactions (which are strong in total but weak in individuals) between NH3 and the smart COF, as well as the increased polarity and number of hydrogen bond sites after the trans-cis isomerization.

Reversible Adsorption of Ammonia in the Crystalline Solid of a CO2H-Functionalized Cyclic Oligophenylene

Ammonia (NH3) is a viable candidate for the storage and distribution of hydrogen (H2) due to its exceptional volumetric and gravimetric hydrogen energy density. Therefore, it is desirable to develop NH3 storage materials that exhibit robust stability across numerous adsorption-desorption cycles. While porous materials with polymeric frameworks are often used for NH3 capture, achieving reversible NH3 uptake remains a formidable challenge, primarily due to the high reactivity of NH3. Here, we advocate the use of CO2H-functionalized cyclic oligophenylene 1a with high chemical stability as a novel single-molecule-based adsorbent for NH3. Simple reprecipitation of 1a selectively yielded microporous crystalline solid 1a (N). Crystalline 1a (N) adsorbs up to 8.27 mmol/g of NH3 at 100 kPa and 293 K. Adsorbed NH3 in the pore of 1a (N) has a packing density of 0.533 g/cm3 at 293 K, which is close to the density of liquid NH3 (0.681 g/cm3 at 240 K). Crystalline 1a (N) also exhibits reversible NH3 adsorption over at least nine cycles, sustaining its storage capacity (1st cycle: 8.27 mmol/g; 9th cycle: 8.25 mmol/g at 100 kPa and 293 K) and crystallinity. During each desorption cycle, NH3 was removed from 1a (N) under reduced pressure (∼65 Pa), leaving <3% of the total uptake, and 1a (N) was fully purged under dynamic vacuum conditions (∼5 × 10-4 Pa at 293 K for 1 h) before the subsequent adsorption cycles. Thus, microporous crystalline 1a (N) can reliably adsorb and desorb NH3 repeatedly, which avoids the need for heat-based activation between cycles.

Stepwise Protonation of Three-Dimensional Covalent Organic Frameworks for Enhancing Hydrogen Peroxide Photosynthesis

Three-dimensional covalent organic frameworks (3D COFs), recognized for their tailorable structures and accessible active sites, offer a promising platform for developing advanced photocatalysts. However, the difficulty in the synthesis and functionalization of 3D COFs hinders their further development. In this study, we present a series of 3D-bcu-COFs with 8 connected porphyrin units linked by linear linkers through imine bonds as a versatile platform for photocatalyst design. The photoresponse of 3D-bcu-COFs was initially modulated by functionalizing linear linkers with benzo-thiadiazole or benzo-selenadiazole groups. Furthermore, taking advantage of the well-exposed porphyrin and imine sites in 3D-bcu-COFs, their photocatalytic activity was optimized by stepwise protonation of imine bonds and porphyrin centers. The dual protonated COF with benzo-selenadiazole groups exhibited enhanced charge separation, leading to an increased photocatalytic H2O2 production under visible light. This enhancement demonstrates the combined benefits of linker functionalization and stepwise protonation on photocatalytic efficiency.

Crystalline Porous Organic Frameworks Based on Multiple Dynamic Linkages

A novel class of crystalline porous materials has been developed utilizing multilevel dynamic linkages, including covalent B-O, dative B←N and hydrogen bonds. Typically, boronic acids undergo in situ condensation to afford B3O3-based units, which further extend to molecular complexes or chains via B←N bonds. The obtained superstructures are subsequently interconnected via hydrogen bonds and π-π interactions, producing crystalline porous organic frameworks (CPOFs). The CPOFs display excellent solution processability, allowing dissolution and subsequent crystallization to their original structures, independent of recrystallization conditions, possibly due to the diverse bond energies of the involved interactions. Significantly, the CPOFs can be synthesized on a gram-scale using cost-effective monomers. In addition, the numerous acidic sites endow the CPOFs with high NH3 capacity, surpassing most porous organic materials and commercial materials.

COF-based membranes for liquid phase separation: Preparation, mechanism and perspective

Covalent organic frameworks (COFs) are a new kind of crystalline porous materials composed of organic molecules connected by covalent bonds, processes the characteristics of low density, large specific surface area, adjustable pore size and structure, and easy to functionalize, which have been widely used in the field of membrane separation technology. Recently, there are more and more researches focusing on the preparation methods, separation application, and mechanism of COF membranes, which need to be further summarized and compared. In this review, we primarily summarized several conventional preparation methods, such as two-phase interfacial polymerization, in-situ growth on substrate, unidirectional diffusion method, layer-by-layer assembly method, mixed matrix membranes, and so on. The advantages and disadvantages of each method are briefly summarized. The application potential of COF membrane in liquid separation are introduced from four aspects: dyeing wastewater treatment, heavy metal removal, seawater desalination and oil-water separation. Then, the mechanisms including pore structure, hydrophilic/hydrophobic, electrostatic repulsion/attraction and Donnan effect are introduced. For the efficient removal of different kind of pollutions, researchers can select different ligands to construct membranes with specific pore size, hydrophily, salt or organic rejection ability and functional group. The ideas for the design and preparation of COF membranes are introduced. Finally, the future direction and challenges of the next generation of COF membranes in the field of separation are prospected.

Advanced Materials for NH3 Capture: Interaction Sites and Transport Pathways

Ammonia (NH3) is a carbon-free, hydrogen-rich chemical related to global food safety, clean energy, and environmental protection. As an essential technology for meeting the requirements raised by such issues, NH3 capture has been intensively explored by researchers in both fundamental and applied fields. The four typical methods used are (1) solvent absorption by ionic liquids and their derivatives, (2) adsorption by porous solids, (3) ab-adsorption by porous liquids, and (4) membrane separation. Rooted in the development of advanced materials for NH3 capture, we conducted a coherent review of the design of different materials, mainly in the past 5 years, their interactions with NH3 molecules and construction of transport pathways, as well as the structure-property relationship, with specific examples discussed. Finally, the challenges in current research and future worthwhile directions for NH3 capture materials are proposed.

Custom-Design of Strong Electron/Proton Extractor on COFs for Efficient Photocatalytic H2O2 Production

The development of photocatalysts with continuous electron extraction and rapid proton transfer could kinetically accelerate the artificial photosynthesis, but remains a challenge. Herein, we report the topology-guided synthesis of a high-crystalline triazine covalent organic framework (COF) decorated by uniformly distributed polar oxygen functional groups (sulfonic group or carboxyl) as the strong electron/proton extractor for efficient photocatalytic H2O2 production. It was found that the polarity-based proton transfer as well as electron enrichment in as-obtained COFs played a crucial role in improving the H2O2 photosynthesis efficiency (i.e., with an activity order of sulfonic acid- (SO3H-COF)>carboxyl- (COOH-COF)>hydrogen- (H-COF) functionalized COFs). The strong polar sulfonic acid group in the high-crystalline SO3H-COF triggered a well-oriented built-in electric field and more hydrophilic surface, which serves as an efficient carrier extractor enabling a continuous transportation of the photogenerated electrons and interfacial proton to the active sites (i.e., C atoms linked to -SO3H group). As-accelerated proton-coupled electron transfer (PCET), together with the stabilized O2 adsorption finally leads to the highest H2O2 production rate of 4971 μmol g-1 h-1 under visible light irradiation. Meanwhile, a quantum yield of 15 % at 400 nm is obtained, superior to most reported COF-based photocatalysts.

Design and preparation of fluorescent covalent organic frameworks for biological sensing

Covalent organic frameworks (COFs) are a new class of functional solids featuring several fantastic structural characteristics, including a great diversity of building units and cross-linking patterns, precise integration of building blocks, and adjustable topology of porous architecture. In addition to the above features, some COF samples are constructed with high-density conjugated fragments, which have unique potential advantages in fluorescence imaging, and thus may have great potential applications in bioimaging. Herein, this article summarizes the recent progress in the design and preparation of fluorescent covalent organic frameworks. We investigate the systemic correlation between the structural qualities of COF networks and biological sensors. Finally, the significant advantages, major challenges, and future opportunities of fluorescent covalent organic frameworks are discussed for the development of next-generation porous materials for sensing applications.

Creating amphiphilic porosity in two-dimensional covalent organic frameworks via steric-hindrance-mediated precision hydrophilic-hydrophobic microphase separation

Creating different pore environments within a covalent organic framework (COF) will lead to useful multicompartment structure and multiple functions, which however has been scarcely achieved. Herein we report designed synthesis of three two-dimensional COFs with amphiphilic porosity by steric-hindrance-mediated precision hydrophilic-hydrophobic microphase separation. Dictated by the different steric effect of the substituents introduced to a monomer, dual-pore COFs with kgm net, in which all hydroxyls locate in trigonal micropores while hydrophobic sidechains exclusively distribute in hexagonal mesopores, have been constructed to form completely separated hydrophilic and hydrophobic nanochannels. The unique amphiphilic channels in the COFs enable the formation of Janus membranes via interface growth. This work has realized the creation of two types of channels with opposite properties in one COF, demonstrating the feasibility of introducing different properties/functions into different pores of heteropore COFs, which can be a useful strategy to develop multifunctional materials.

Dispersing LiCl in Zwitterionic COF for Highly Efficient Ammonia Storage and Separation

Efficient and inherently safe NH3 storage and separation are of significant importance for the chemical industry. Herein, we proposed zwitterionic COF as a porous host to disperse LiCl for highly efficient NH3 storage and separation with record adsorption capacity. The equivalently cationic and anionic groups in the channels of zwitterionic COF could act as two separated sites to facilitate the dispersion of LiCl, hence the optimal composite exhibits a high capture capacity of 44.98 mmol/g at 25 °C and 1 bar, far exceeding other existing porous materials. Notably, the adsorption capacity is completely reversible and the efficient separation of NH3 from NH3 /CO2 /N2 mixture is achieved through breakthrough experiments. DFT calculation combined with XPS and 7 Li NMR experimental results give insight into the interaction between zwitterionic COF and LiCl. This work extends possibilities for the development of efficient adsorbents for NH3 storage and separation.

Carborane-Based Three-Dimensional Covalent Organic Frameworks

The predesignable porous structure and high structural flexibility of covalent organic frameworks (COFs) render this material desirable as a platform for addressing various cutting-edge issues. Precise control over their composition, topological structure, porosity, and stability to realize tailor-made functionality still remains a great challenge. In this work, we developed a new kind of three-dimensional (3D) carborane-based COF with a 7-fold interpenetrating dia topological diagram. The resulting COFs exhibited high crystallinity, exceptional porosity, and strong robustness. The slightly lower electronegativity of boron (2.04) than that of hydrogen (2.20) can lead to the polarization of the B-H bond into a Bδ+-Hδ- mode, which renders these COFs as high-performance materials for the adsorption and separation of hexane isomers through the B-Hδ-···Hδ+-C interaction. Significantly, the carborane content of obtained COFs reached up to 54.2 wt %, which gets the highest rank among all the reported porous materials. Combining high surface area, strong robustness, and high content of carborane, the obtained COFs can work as efficient adsorbents for the separation of the five hexane isomers with high separation factors. This work not only enhances the diversity of 3D functional COFs but also constitutes a further step toward the efficient separation of alkane isomers.

Boost of Gas Adsorption Kinetics of Covalent Organic Frameworks via Ionic Liquid Solution Process

Adsorption, storage, and conversion of gases (e.g., carbon dioxide, hydrogen, and iodine) are the three critical topics in the field of clean energy and environmental mediation. Exploring new methods to prepare high-performance materials to improve gas adsorption is one of the most concerning topics in recent years. In this work, an ionic liquid solution process (ILSP), which can greatly improve the adsorption kinetic performance of covalent organic framework (COF) materials for gaseous iodine, is explored. Anionic COF TpPaSO3 H is modified by amino-triazolium cation through the ILSP method, which successfully makes the iodine adsorption kinetic performance (K80% rate) of ionic liquid (IL) modified COF AC4 tirmTpPaSO3 quintuple compared with the original COF. A series of experimental characterization and theoretical calculation results show that the improvement of adsorption kinetics is benefited from the increased weak interaction between the COF and iodine, due to the local charge separation of the COF skeleton caused by the substitution of protons by the bulky cations of ILs. This ILSP strategy has competitive help for COF materials in the field of gas adsorption, separation, or conversion, and is expected to expand and improve the application of COF materials in energy and environmental science.

Pore partition in two-dimensional covalent organic frameworks

Covalent organic frameworks (COFs) have emerged as a kind of crystalline polymeric materials with high compositional and geometric tunability. Most COFs are currently designed and synthesized as mesoporous (2-50 nm) and microporous (1-2 nm) materials, while the development of ultramicroporous (<1 nm) COFs remains a daunting challenge. Here, we develop a pore partition strategy into COF chemistry, which allows for the segmentation of a mesopore into multiple uniform ultramicroporous domains. The pore partition is implemented by inserting an additional rigid building block with suitable symmetries and dimensions into a prebuilt parent framework, leading to the partitioning of one mesopore into six ultramicropores. The resulting framework features a wedge-shaped pore with a diameter down to 6.5 Å, which constitutes the smallest pore among COFs. The wedgy and ultramicroporous one-dimensional channels enable the COF to be highly efficient for the separation of five hexane isomers based on the sieving effect. The obtained average research octane number (RON) values of those isomer blends reach up to 99, which is among the highest records for zeolites and other porous materials. Therefore, this strategy constitutes an important step in the pore functional exploitation of COFs to implement pre-designed compositions, components, and functions.

Competition between side-chain interactions dictates 2D polymer stacking order

Interrogating the stacking of two-dimensional polymers (2DPs) as a function of chemical composition is important to leverage their properties. We explore the dependence of 2DP crystallinity and porosity on variable amounts of zwitterions contained within the pores and find that high zwitterion loadings consistently diminish 2DP materials quality. A competition between disruptive zwitterion electrostatic forces and alkyl stabilization directs the stacking order of each 2DP and demonstrates the contrasting effects of side chain composition on 2DP crystallinity and porosity.

Halide Perovskite glues activate two-dimensional covalent organic framework crystallites for selective NO2 sensing

Two-dimensional covalent organic frameworks (2D COFs) are promising for gas sensing owing to the large surface area, abundant active sites, and their semiconducting nature. However, 2D COFs are usually produced in the form of insoluble micro-crystallites. Their poor contacts between grain boundaries severely suppress the conductivity, which are too low for chemresistive gas sensing. Here, we demonstrate that halide perovskites can be employed as electric glues to bond 2D COF crystallites to improve their conductivity by two orders of magnitude, activating them to detect NO₂ with high selectivity and sensitivity. Resonant microcantilever, grand canonical Monte Carlo, density functional theory and sum-frequency generation analyses prove that 2D COFs can enrich and transfer electrons to NO₂ molecules, leading to increased device conductivity. This work provides a facile approach for improving the conductivity of polycrystalline 2D COF films and may expand their applications in semiconductor devices, such as sensors, resistors, memristors and field-emission transistors.

Ammonia Capture in Rhodium(II)-Based Metal-Organic Polyhedra via Synergistic Coordinative and H-Bonding Interactions

Ammonia (NH₃) is among the world's most widely produced bulk chemicals, given its extensive use in diverse sectors such as agriculture; however, it poses environmental and health risks at low concentrations. Therefore, there is a need for developing new technologies and materials to capture and store ammonia safely. Herein, we report for the first time the use of metal-organic polyhedra (MOPs) as ammonia adsorbents. We evaluated three different rhodium-based MOPs: [Rh₂(bdc)₂]₁₂ (where bdc is 1,3-benzene dicarboxylate); one functionalized with hydroxyl groups at its outer surface [Rh₂(OH-bdc)₂]₁₂ (where OH-bdc is 5-hydroxy-1,3-benzene dicarboxylate); and one decorated with aliphatic alkoxide chains at its outer surface [Rh₂(C₁₂O-bdc)₂]₁₂ (where C₁₂O-bdc is 5-dodecoxybenzene-1,3-benzene dicarboxylate). Ammonia-adsorption experiments revealed that all three Rh-MOPs strongly interact with ammonia, with uptake capacities exceeding 10 mmol/g_MOP. Furthermore, computational and experimental data showed that the mechanism of the interaction between Rh-MOPs and ammonia proceeds through a first step of coordination of NH₃ to the axial site of the Rh(II) paddlewheel cluster, which triggers the adsorption of additional NH₃ molecules through H-bonding interaction. This unique mechanism creates H-bonded clusters of NH₃ on each Rh(II) axial site, which accounts for the high NH₃ uptake capacity of Rh-MOPs. Rh-MOPs can be regenerated through their immersion in acidic water, and upon activation, their ammonia uptake can be recovered for at least three cycles. Our findings demonstrate that MOPs can be used as porous hosts to capture corrosive molecules like ammonia, and that their surface functionalization can enhance the ammonia uptake performance.

Desorption of Ammonia Adsorbed on Prussian Blue Analogs by Washing with Saturated Ammonium Hydrogen Carbonate Solution

Prussian blue analogs (PBAs) have been reported as promising ammonia (NH₃) adsorbents with a high capacity compared to activated carbon, zeolite, and ion exchange resins. The adsorbed NH₃ was desorbed by heating and washing with water or acid. Recently, we demonstrated that desorption was also possible by washing with a saturated ammonium hydrogen carbonate solution (sat. NH₄HCO₃aq) and recovered NH₃ as an NH₄HCO₃ solid by introducing CO₂ into the washing liquid after desorption. However, this has only been proven for copper ferrocyanide and the relationship between the adsorption/desorption behavior and metal ions in PBAs has not been identified. In this study, we investigated the adsorption/desorption behavior of PBAs that are complexes of first row transition metals with hexacyanometalate anions. Six types of PBAs were tested in this study and copper ferricyanide exhibited the highest desorption/adsorption ratio. X-ray diffraction results revealed high structural stability for cobalt hexacyanocobaltate (CoHCC) and nickel ferricyanide (NiHCF). The Fourier transform infrared spectroscopy results showed that the NH₃ adsorbed on the vacancy sites tended to desorb compared to the NH₃ adsorbed on the interstitial sites as ammonium ions. Interestingly, the desorption/adsorption ratio exhibited the Irving-Williams order.

Arrangement of Indocyanine Green in a 1.5-Nanometer Channel to Achieve High-Efficiency Imaging of the Intestinal Lymphatic System

The complications of inflammatory bowel diseases (IBDs) seriously endanger people’s health, such as bleeding, polyp hyperplasia, and even cancer. Although the precise pathophysiology of IBD is unknown, alterations in the intestinal lymphatic network, such as lymphangiogenesis and lymphatic vessel dysfunction, are well-established features. Therefore, the development of a reliable technology is urgently required, with a stereoscopic, deep, and high-resolution technology for IBD lymphatic targeting imaging in clinical practice. However, indocyanine green, the only clinically approved imaging agent by the Food and Drug Administration, can easily cause self-aggregation or be interfered with by microenvironments, causing fluorescence quenching, which seriously affects the imaging and detective capabilities. Herein, indocyanine green molecules are arranged in a 1.5-nanometer one-dimensional channel (TpPa-1@ICG). Based on this specified structure, the fluorescence enhancement effect is observed in the TpPa-1@ICG resultant, and the fluorescence intensity is enhanced by 27%. In addition, the ICG-incorporated porous solid reveals outstanding solvent (dichloromethane, tetrahydrofuran, etc.) and thermal (>300 °C) stability. After modifying the target molecules, TpPa-1@ICG showed excellent imaging ability for intestinal lymphatic vessels, providing a new imaging tool for IBDs research.

A Review on Cyanide Gas Elimination Methods and Materials

Cyanide gas is highly toxic and volatile and is among the most typical toxic and harmful pollutants to human health and the environment found in industrial waste gas. In the military context, cyanide gas has been used as a systemic toxic agent. In this paper, we review cyanide gas elimination methods, focusing on adsorption and catalysis approaches. The research progress on materials capable of affecting cyanide gas adsorption and catalytic degradation is discussed in depth, and the advantages and disadvantages of various materials are summarized. Finally, suggestions are provided for future research directions with respect to cyanide gas elimination materials.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Ratiometric Fluorescent pH Sensor Based on a Tunable Multivariate Covalent Organic Framework

Ratiometric detection of pH is always significant in environmental regulation, medical diagnosis, synthetic chemistry, and beyond. The construction of practical ratiometric pH sensors with reusability is still challenging. Herein, by exploiting a multivariate strategy, we first synthesized and reported a series of novel three-component covalent organic frameworks (COF-COOH_X, X = 33, 50, and 67) through Schiff base reaction between 2-hydroxybenzene-1,3,5-tricarbaldehyde (HTA), 4,4'-diamino-3,3'-biphenyldicarboxylic acid (DBA), and 5,5'-diamino-2,2'-bipyridine (BPY) at various molar ratios (X = [DBA]/([BPY] + [DBA]) × 100 = 33, 50, and 67). COF-COOH_X (X = 33, 50, and 67) displayed ratiometric pH sensing performance in acidic conditions with selectivity and repeatability. By tuning the molar ratio of DBA and BPY, the fluorescent properties, linear pH responsive ranges, and pK_a values of COF-COOH_X (X = 33, 50, and 67) can be regulated. Meanwhile, the two-component COF-COOH₀ and COF-COOH₁₀₀ did not exhibit ratiometric pH detection ability. Moreover, the constructed three ratiometric sensors can be applied to detect pH in drug solutions and carbonated drinks with satisfactory results. This work sheds new light on the design and fabrication of innovative ratiometric fluorescent sensors using COFs.

An Efficient Technique for Ammonia Capture in the Haber-Bosch Process Loop-Membrane-Assisted Gas Absorption

The present study continues the development and enhancement of a highly efficient unique hybrid technique-membrane-assisted gas absorption in designing the separation unit, which provides the improvement in mass-transfer of a target component during the ammonia capture process from a process loop of the Haber-Bosch technological route. In order to minimize the absorbent volume to membrane area ratio, the special separation cell was designed based on a combination of two types of hollow fiber membranes, dense gas separation membrane and porous pervaporation membrane. The separation performance tests were implemented under two sets of conditions, sweeping the bore (permeate) side of a cell with helium and hydrogen-nitrogen mix. For both cases, the membrane-assisted gas absorption cell demonstrated high separation efficiency, and the ammonia concentration in the permeate was never lower than 81 mol%; meanwhile, under the hydrogen-nitrogen bore sweep conditions, the ammonia concentration in the permeate reached 97.5 mol% in a single-step process. Nevertheless, there is a product purity-recovery rate trade-off, which is a typical issue for separation processes.

High Gravimetric and Volumetric Ammonia Capacities in Robust Metal-Organic Frameworks Prepared via Double Postsynthetic Modification

Ammonia is a promising energy vector that can store the high energy density of hydrogen. For this reason, numerous adsorbents have been investigated as ammonia storage materials, but ammonia adsorbents with a high gravimetric/volumetric ammonia capacity that can be simultaneously regenerated in an energy-efficient manner remain underdeveloped, which hampers their practical implementation. Herein, we report Ni_acryl_TMA (TMA = thiomallic acid), an acidic group-functionalized metal-organic framework prepared via successive postsynthetic modifications of mesoporous Ni₂Cl₂BTDD (BTDD = bis(1H-1,2,3,-triazolo [4,5-b],-[4',5'-i]) dibenzo[1,4]dioxin). By virtue of the densely located acid groups, Ni_acryl_TMA exhibited a top-tier gravimetric ammonia capacity of 23.5 mmol g^-1 and the highest ammonia storage of 0.39 g cm^-3 at 1 bar and 298 K. The structural integrity and ammonia storage capacity of Ni_acryl_TMA were maintained after ammonia adsorption-desorption tests over five cycles. Temperature-programmed desorption analysis revealed that the moderate strength of the interaction between the functional groups and ammonia significantly reduced the desorption temperature compared to that of the pristine framework with open metal sites. The structures of the postsynthetic modified analogues were elucidated based on Pawley/Rietveld refinement of the synchrotron powder X-ray diffraction patterns and van der Waals (vdW)-corrected density functional theory (DFT) calculations. Furthermore, the ammonia adsorption mechanism was investigated via in situ infrared and vdW-corrected DFT calculations, revealing an atypical guest-induced binding mode transformation of the integrated carboxylate. Dynamic breakthrough tests showed that Ni_acryl_TMA can selectively capture traces of ammonia under both dry and wet conditions (80% relative humidity). These results demonstrate that Ni_acryl_TMA is a superior ammonia storage/capture material.

A figure of merits-based performance comparison of various advanced functional nanomaterials for adsorptive removal of gaseous ammonia

The implementation of sustainable industrial development based on energy/cost-effective techniques with zero/low rate of pollutant emission is an ideal strategy for the proper management of a natural environment. Gaseous ammonia released from a variety of anthropogenic sources (e.g., agriculture, pharmaceuticals, commercial cleaning products, and refrigerant) is estimated to be as high as 150 million tons∙year^-1. To reduce the negative effects of atmospheric ammonia, the great utility of advanced functional nanomaterials (e.g., metal organic frameworks, covalent organic polymers, metal/metal oxide nanoparticles, and carbon nanostructures) has been recognized. To gain a better understanding of the sorptive removal potential of diverse materials, their performance has been evaluated based on the key performance merits (e.g., initial concentration, sorption capacity, and partition coefficient). Generally, the PC values can be applied to significantly estimate the contaminant adsorption potential of NMs via balancing the biased influences of operating parameters (e.g., initial concentration of pollutants) as perceived for the partitioning of compounds between aqueous phases at equilibrium (e.g., Henry's Law). Therefore, in this work, we have proposed the PC as a prosperous performance merit (in terms of heterogeneity of surface and strength of adsorption process) for the selection of high performance nano-adsorbents for gaseous ammonia. Moreover, the water stability, recyclability, economic aspects, and future perspectives have also been discussed for real-world applications of advanced nanomaterial against gaseous ammonia adsorption. The outcome of this evaluation will be expedient for the classification/selection of the most effectual and cost-effective options for mitigation of environmental pollutants like gaseous ammonia.

Enhancing Enzyme Activity by the Modulation of Covalent Interactions in the Confined Channels of Covalent Organic Frameworks

Controllable regulations on the enzyme conformation to optimize catalytic performance are highly desired for the immobilized biocatalysts yet remain challenging. Covalent organic frameworks (COFs) possess confined channels with finely tunable pore environment, offering a promising platform for enzyme encapsulation. Herein, we covalently immobilized the cytochrome c (Cyt c) in the size-matched channels of COFs with different contents of anchoring site, and significant enhancement of the stability and activity (≈600 % relative activity compared with free enzyme) can be realized by optimizing the covalent interactions. Structural analyses on the immobilized Cyt c suggest that covalent bonding could induce conformational perturbation resulting in more accessible active sites. The effectiveness of the covalent interaction modulation together with the tailorable confined channels of COFs offers promise to develop high-performance biocatalysts.

Metal@COFs Possess High Proton Conductivity with Mixed Conducting Mechanisms

The inherent porous structures and aligned functional units inside the skeleton of covalent organic frameworks (COFs) provide an extraordinary promise for post-modification and deservedly expand their application in the field of proton conduction. Herein, we tactfully introduced copper ions into a two-dimensional COF (TpTta) furnished with ample N,O-chelating sites by a post-modification strategy to achieve two copper(II)-modified products, namely, CuCl₂@TpTta-3 and CuCl₂@TpTta-10. Inspiringly, the two modified COFs demonstrated the higher conductivities of 1.77 × 10^-3 and 8.81 × 10^-3 S cm^-1 under 100 °C and 98% relative humidity, respectively, among the previously reported COFs with higher σ values. In comparison to the pristine COFs, the σ values of CuCl₂@TpTta-3 and CuCl₂@TpTta-10 are boosted by 2 orders of magnitude. On the basis of structural analyses, nitrogen and water vapor adsorption tests, and proton conduction mechanism analysis, we deeply analyzed the reason why the conductivity of the modified COFs was significantly increased. To the best of our knowledge, it is the first time to employ the CuCl₂-modified strategy to boost the conductivity of COFs, which offers a wise idea for the fabrication of highly conductive materials in the field of fuel cells.

Covalent organic framework-based porous materials for harmful gas purification

Covalent organic frameworks (COFs) with 2D or 3D networks are a class of novel porous crystalline materials, and have attracted more and more attention in the field of gas purification owing to their attractive physicochemical properties, such as high surface area, adjustable functionality and structure, low density, and high stability. However, few systematic reviews about the application statuses of COFs in gas purification are available, especially about non-CO₂ harmful gases. In this review, the recent progress of COFs about the capture, catalysis, and detection of common harmful gases (such as CO₂, NO_x, SO₂, H₂S, NH₃ and volatile pollutants) were comprehensively discussed. The design strategies of COF functional materials from porosity adjustment to surface functionalization (including bottom-up approach, post-synthetic approach, and blending with other materials) for certain application were summarized in detail. Furthermore, the faced challenges and future research directions of COFs in the harmful gas treatment were clearly proposed to inspire the development of COFs.

A Facile and Highly Efficient Approach to Obtain a Fluorescent Chromogenic Porous Organic Polymer for Lymphatic Targeting Imaging

Porous organic polymers have an open architecture, excellent stability, and tunable structural components, revealing great application potential in the field of fluorescence imaging, but this part of the research is still in its infancy. In this study, we aimed to tailor the physical and chemical characteristics of indocyanine green using sulfonic acid groups and conjugated fragments, and prepared amino-grafted porous polymers. The resulting material had excellent solvent and thermal stability, and possessed a relatively large pore structure with a size of 3.4 nm. Based on the synergistic effect of electrostatic bonding and π–π interactions, the fluorescent chromogenic agent, indocyanine green, was tightly incorporated into the pore cavity of POP solids through a one-step immersion method. Accordingly, the fluorescent chromogenic POP demonstrated excellent imaging capabilities in biological experiments. This preparation of fluorescent chromogenic porous organic polymer illustrates a promising application of POP-based solids in both fluorescence imaging and biomedicine applications.

A facile and scalable synthetic method for covalent organic nanosheets: ultrasonic polycondensation and photocatalytic degradation of organic pollutants

Covalent organic framework nanosheets (COF NSs or CONs), as compared to their bulk counterparts two-dimensional (2D) covalent organic frameworks (COFs), exhibit superior performance in many aspects due to their fully accessible active sites benefiting from their ultrathin porous 2D structures. The development of a scalable synthetic methodology for CONs is crucial to further exploration of their unique properties and practical applications. Herein, we report an efficient strategy to fabricate ultrathin CONs through direct polycondensation of monomers under ultrasonic treatment and mild conditions. This method is facile and scalable, which is demonstrated by gram-scale synthesis of two ultrathin 2D CONs in several hours. Moreover, the as-prepared ultrathin CONs show excellent heterogeneous photocatalytic performance for the degradation of organic pollutants (dyes as representatives), remarkably superior to the bulk COFs prepared from the corresponding monomers under solvothermal conditions. This research provides a new roadmap for the scalable and facile synthesis of ultrathin CONs, which is of paramount importance for fully exploring the tremendous potential of this emerging type of 2D material.

We develop a strategy to efficiently fabricate ultrathin covalent organic framework nanosheets (CONs) through direct polycondensation of monomers under ultrasonic treatment. The CONs exhibit excellent photocatalytic performance for the degradation of organic pollutants.

A Covalent Organic Framework Membrane with Homo Hierarchical Pores for Confined Reactive Crystallization

Gas-liquid (G-L) reactive crystallization is a major technology for advanced materials construction, which requires a short diffusion path on the interface to ensure the reactant supply and stable crystal nucleation under ultrahigh supersaturation. Herein, a covalent organic framework (COF) membrane with homo hierarchical pore structures was proposed as an effective interfacial material for the regulation of confined reactive crystallization. By combining the ordered nanopores of COFs and micropores of anodic aluminum oxide (AAO), the COF membrane simultaneously provided an excellent nanoscale diffusion-reaction regulation network as the molecular-level confined G-L reactive interface and adjustable submicrometer gas mass transfer channels. The highly selective construction of CaCO₃ superstructures was then achieved. When the submicrometer primary pore size r_p of the constructed COF membrane ranged from 120 to 1.6 nm, the diffusion mechanism of CO₂ varied from viscous flow diffusion to Knudsen diffusion. The growth orientation of CaCO₃ crystals was well confined to obtain spindle-shaped crystals with high selectivity. Meanwhile, the crystal selectivity factor (cube/sphere) increased from 0 to 3.53 under the low interfacial nuclear barrier. Thus, the COF membrane with coupled micro-nanostructures successfully screened the directional preparation conditions for diverse CaCO₃ superstructures, which also paved a meaningful path for the functional application of COFs in accurate mass transfer control and confined chemical reactions.