High-Affinity Nucleic-Acid-Based Receptors for Steroids

Gold nanoparticle-facilitated assembly via supernatant transfer as a colorimetric SELEX and sensing platform for cortisol

Accurate and selective detection of cortisol, a key biomarker for stress and metabolic health, is essential for diagnostics and healthcare. Single-stranded DNA (ssDNA) aptamers hold great promise for small molecule detection, yet conventional systematic evolution of ligands by exponential enrichment (SELEX) methods are often hindered by invisible screening and restricted conjugation capabilities. Here, we report a rapid and straightforward approach for cortisol aptamer discovery and determination using gold nanoparticle-facilitated assembly via supernatant transfer (GNP-FAST) coupled with GNP-SELEX. These GNP-mediated visual processes enable efficient ssDNA library refinement in only 6 rounds of GNP-FAST, followed by rapid aptamer discovery within 12 rounds of GNP-SELEX, culminating in a highly selective colorimetric assay for cortisol. Comprehensive engineering and characterization, including molecular docking, circular dichroism spectroscopy, and isothermal titration calorimetry, validated the performance of the identified aptamers. Notably, a truncated 26-mer of the selected aptamer, CorApt5-T, exhibited high binding affinity (KDapp≈210 nM) and specificity for cortisol through positive cooperativity on the GNP surface. Consequently, CorApt5-T enabled a simple and rapid GNP-based colorimetric assay for cortisol in saliva and serum, demonstrating more pronounced cortisol-driven structural changes and superior sensitivity when compared to previously reported cortisol aptamers. These findings demonstrate the potential of integrating GNP-based colorimetric assay with GNP-FAST and GNP-SELEX as a visible platform for developing biosensors targeting a broad range of small molecules.

Highly selective DNA aptamer sensor for intracellular detection of coenzyme A

Detecting Coenzyme A (CoA) in cells is vital for understanding its role in metabolism. DNA aptamers, though widely used for monitoring many other molecules, have not been effective for CoA detection, as previous attempts at obtaining DNA aptamers for CoA using SELEX resulted in aptamers that only recognize the adenine moiety of CoA. This "tyranny" of adenine dominating in SELEX has, therefore, hampered the SELEX of aptamers specific for CoA. To meet this challenge, we employed a capture SELEX method by incorporating rigorous counter selections against adenine, adenosine, ATP, pantetheine, and pantothenic acid, resulting in a highly specific DNA aptamer for CoA over adenosine, ATP and other related metabolites such as NADH, with a dissociation constant of 48.9 μM. This aptamer was then converted to a fluorescent sensor for CoA across pH 6.4-8.0. Confocal microscopy showed its ability to visualize CoA in living cells, with fluorescence changes observed upon manipulating CoA levels. This method broadens SELEX's application and presents a promising approach for studying and understanding CoA dynamics.

Refinement and Truncation of DNA Aptamers Based on Molecular Dynamics Simulations: Computational Protocol and Experimental Validation

Aptamers have proven useful for a wide variety of applications, such as drug delivery systems and analytical reagents for diagnosis or food safety control. Conventional aptamer selection methods typically produce sequences longer than necessary, which are optimized through a postselection trial and error process to obtain the shortest-length sequence that preserves binding affinity. Herein, we describe a general strategy to obtain the tridimensional structure of DNA aptamers using a semiautomated molecular dynamics protocol, which serves as a guide to rationally improve experimentally selected candidates. Based on this approach, we designed truncated aptamers from previously described ligands recognizing different peptides and proteins, which are 20-35% shorter than the original candidates and present similar or even improved binding affinities. Moreover, we also discriminate between energetically similar secondary structures in terms of the energetic scoring of the molecular dynamics trajectories and rationally explain the role of poly thymine spacers in the (de)stabilization of the structure. This work demonstrates how a protocol for generating the aptamers tridimensional structure can accelerate their optimization for obtaining better analytical reagents and therapeutic agents.

Exploring the relationship between aptamer binding thermodynamics, affinity, and specificity

Aptamers are oligonucleotide-based bioreceptors that are selected in vitro from randomized libraries to bind specific molecules with high affinity, and are proving popular for applications in diagnostics, bioimaging, and therapeutics. A better understanding of aptamer-ligand interactions could facilitate sequence engineering efforts to improve aptamer binding properties, and perhaps eventually allow for the direct design of high-quality aptamers. To date, however, there have been very few comprehensive studies exploring the relationship between aptamer binding properties and thermodynamics. Isothermal titration calorimetry (ITC) is a gold-standard method for studying the thermodynamics of ligand-receptor interactions. In this work, we have compiled ITC-derived thermodynamic binding data from 317 small-molecule-binding DNA aptamers, along with specificity profiles for ∼6000 aptamer-ligand pairs, and performed systematic analysis of the resulting datasets. This analysis revealed a variety of interesting patterns and trends. For example, ligand binding for most aptamers is generally driven solely by enthalpy, and aptamers with the highest binding enthalpy and greatest entropic binding penalties consistently have high specificity. We envision that the expansion and further analysis of such datasets will yield a far better understanding of the complex interplay between the various non-covalent interactions underlying aptamer-ligand recognition.

Generalizable Molecular Switch Designs for In Vivo Continuous Biosensing

Continuous biosensors have the potential to transform medicine, enabling healthcare to be more preventative and personalized as compared to the current standard of reactive diagnostics. Realizing this transformative potential requires biosensors that can function continuously in vivo without sample preparation and deliver molecular specificity, sensitivity, and high temporal resolution. Molecular switches stand out as a promising solution for creating such sensors for the continuous detection of many different types of molecules. Molecular switches are target-binding receptors designed such that binding causes a conformational change in the switch's structure. This structure switching induces a measurable signal change via reporters incorporated into the molecular switch, enabling highly specific, label-free sensing. However, there remains an outstanding need for generalizable switch designs that can be adapted for the detection of a wide range of molecular targets. In this Account, we chronicle the work our lab has done to develop generalizable molecular switch designs that allow more rapid development of high-performance biosensors across a broad range of biomarkers. Pioneering efforts toward molecular switch-based biosensing have employed aptamers─nucleic acid-based receptors with sequence-specific target affinity. However, most of these early demonstrations relied upon aptamers with intrinsic structure-switching capabilities. To accelerate aptamer switch design for more targets, we have applied rational design and knowledge of an aptamer's structure to engineer switching functionality into pre-existing aptamers. Our designs contained several structural parameters that enabled us to easily tune the sensitivity and binding kinetics of the resulting switches. Using such rationally designed aptamer switches, we demonstrated continuous optical detection of cortisol and dopamine at physiologically relevant concentrations in complex media. In an effort to move beyond aptamers with well-characterized structural properties, we developed a high-throughput screening method that allowed us to simultaneously screen millions of candidates derived from a single aptamer to find sensitive switches without any prior structural knowledge of the parent aptamer. In subsequent work, we reasoned that we could enhance our ability to design a broader range of biosensors by leveraging other classes of receptors besides aptamers. Antibodies offer excellent affinity and specificity for a wide range of targets, but lack the capacity for intrinsic structure switching. We therefore developed a set of strategies to augment antibodies with the capacity to act as molecular switches with a diverse range of target-binding properties. We combined both the high binding affinity of an antibody with the structure-switching capabilities of an aptamer to develop a chimeric switch with 100-fold enhanced sensitivity for a protein target and improved function in interferent-rich samples. In a second design, we developed a competitive immunoassay-inspired scheme to engineer switching behavior into an antibody for minutes-scale temporal resolution with nanomolar sensitivity. We used this competitive antibody-switch to demonstrate the first continuous detection of cortisol directly in whole blood. Together, these advances in molecular switch development have expanded our capability to rapidly engineer new continuous biosensors, thereby increasing opportunities to track health via a wide range of biomarkers to deliver more personalized and preventative medicine.

Quantifying metabolites using structure-switching aptamers coupled to DNA sequencing

Here we report a method, smol-seq (small-molecule sequencing), using structure-switching aptamers (SSAs) and DNA sequencing to quantify metabolites. In smol-seq, each SSA detects a single target molecule and releases a unique DNA barcode on target binding. Sequencing the released barcodes can, thus, read out metabolite levels. We show that SSAs are highly specific and can be multiplexed to detect multiple targets in parallel, bringing the power of DNA sequencing to metabolomics.

An aptamer-responsive microneedle patch sensor platform combining with hybridization chain reaction amplification for detection of steroid hormone cortisol in skin interstitial fluid

Fluctuations in cortisol levels from stressors are critical for the evaluation of endocrine function in body, and abnormal levels of cortisol may indicate serious health risks. Common strategies for cortisol detection are limited by the drawbacks of the intricate and time-consuming operations and the generation of body trauma. Herein, an aptamer-responsive microneedle patch sensor combining with hybridization chain reaction (HCR) amplification (Apt-HCR MN COR patch) was prepared for easy, accurate and minimally-invasive detection of cortisol in skin interstitial fluid (ISF). In this microneedle patch, swellable methacrylated hyaluronic acid (MeHA) was employed as the matrix for ISF extraction and probes loading. When cortisol bound its aptamer, the trigger DNA initiated the HCR in microneedle patch, producing a fluorescent signal proportional to the cortisol content. Under optimized conditions, in vitro and in vivo investigation confirmed the feasibility of the Apt-HCR MN COR patch for cortisol assay, and good biocompatibility was demonstrated. Benefiting from the aptamer recognition and HCR amplification, the Apt-HCR MN COR patch exhibited excellent selectivity and a detection limit (LOD = 0.048 μM) which could cover cortisol levels in ISF. As a proof of concept, after the established mouse model had shown a circadian rhythm of cortisol secretion, the patch was further used to track cortisol response in short duration of running fatigue exercise on this mouse model. It was demonstrated the detection results agreed well with those obtained by the classical enzyme-linked immunosorbent assay (ELISA). We believed that this strategy will inspire the development of MN sensors for cortisol-related disorders monitoring.

Multiplexed Biomarker Detection Using DNA Payloads: Design, Assembly, and Analysis

Most biomarker assays are typically designed to detect a single molecule type (DNA, RNA, proteins, etc.) in a single assay. This means that monitoring a diverse biomarker panel could quickly become a complex endeavor, requiring different techniques, labs, and expertise. In this chapter, we describe a method for multiplexed biomarker detection from a single sample using variable-length DNA payload chains as the output signal. Through the course of the assay, payloads are systematically disassembled in the presence of specific biomarkers. The resulting distinctly sized fragments then yield characteristic gel electrophoresis band patterns, which can be detected and quantified using image analysis algorithms. We detail the entire process for constructing DNA payloads and conducting a biomarker detection assay, including the sequence design, laboratory assembly, running the assay, and final image analysis.

Dissociation Constant (Kd) Measurement for Small-Molecule Binding Aptamers: Homogeneous Assay Methods and Critical Evaluations

Since 1990, numerous aptamers have been isolated and discovered for use in various analytical, biomedical, and environmental applications. This trend continues to date. A critical step in the characterization of aptamer binding is to measure its binding affinity toward both target and non-target molecules. Dissociation constant (Kd) is the most commonly used value in characterizing aptamer binding. In this article, homogenous assays are reviewed for aptamers that can bind small-molecule targets. The reviewed methods include label-free methods, such as isothermal titration calorimetry, intrinsic fluorescence of target molecules, DNA staining dyes, and nuclease digestion assays, and labeled methods, such as the strand displacement reaction. Some methods are not recommended, such as those based on the aggregation of gold nanoparticles and the desorption of fluorophore-labeled DNA from nanomaterials. The difference between the measured apparent Kd and the true Kd of aptamer binding is stressed. In addition, avoiding the titration regime and paying attention to the time required to reach equilibrium are discussed. Finally, it is important to include mutated non-binding sequences as controls.

A Gold Nanoparticle-Based Cortisol Aptasensor for Non-Invasive Detection of Fish Stress

Cortisol is a key stress biomarker in humans and animals, including fishes. In aquafarming, stress monitoring using cortisol quantification can help to optimize aquaculture practices for welfare and productivity enhancement. However, most current methods for cortisol detection rely on invasive tissue sampling. In this work, we developed a gold nanoparticle (AuNP)-based cortisol sensor to address the demand of detecting picomolar ranges of cortisol from complex fish tank water matrices as a non-invasive alternative for more effective stress monitoring. We first identified a DNA aptamer with effective binding to cortisol and then conjugated the thiol-labelled aptamer to AuNPs together with a blocker molecule (CALNN) to form an Au-Apt-CALNN conjugate that is stable in fish tank water. The cortisol detection principle is based on magnesium chloride (MgCl2)-induced particle aggregation, where the cortisol-bound aptamer on the AuNPs folds into a tertiary structure and provides greater protection for Au-Apt-CALNN against MgCl2-induced aggregation due to steric stabilization. At an optimum MgCl2 concentration, the differential stability of particles with and without cortisol binding offers a limit of detection (LOD) of 100 pM for cortisol within a 35 min reaction. The aptasensor has been validated on recirculating aquaculture system (RAS) fish tank water samples by the HPLC method and was able to detect changes in water cortisol induced by two different stress paradigms. This on-site deployable and non-invasive sensor offers opportunities for more efficient and real-time fish stress monitoring for the optimization of aquaculture practices.

Wearable Sensing Device Integrated with Prestored Reagents for Cortisol Detection in Sweat

Wearable sweat sensors have achieved rapid development since they hold great potential in personalized health monitoring. However, a typical difficulty in practical processes is the control of working conditions for biorecognition elements, e.g., pH level and ionic strength in sweat may decrease the affinity between analytes and recognition elements. Here, we developed a wearable sensing device for cortisol detection in sweat using an aptamer as the recognition element. The device integrated functions of sweat collection, reagent prestorage, and signal conversion. Especially, the components of prestored reagents were optimized according to the inherent characteristics of sweat samples and electrodes, which allowed us to keep optimal conditions for aptamers. The sweat samples were transferred from the inlet of the device to the reagent prestored chamber, and the dry preserved reagents were rehydrated with sweat and then arrived at the aptamer-modified electrodes. Sweat samples of volunteers were analyzed by the wearable sensing device, and the results showed a good correlation with those of the ELISA kit. We believe that this convenient and reliable wearable sensing device has significant potential in self-health monitoring.

Development of Better Aptamers: Structured Library Approaches, Selection Methods, and Chemical Modifications

Systematic evolution of ligands by exponential enrichment (SELEX) has been used to discover thousands of aptamers since its development in 1990. Aptamers are short single-stranded oligonucleotides capable of binding to targets with high specificity and selectivity through structural recognition. While aptamers offer advantages over other molecular recognition elements such as their ease of production, smaller size, extended shelf-life, and lower immunogenicity, they have yet to show significant success in real-world applications. By analyzing the importance of structured library designs, reviewing different SELEX methodologies, and the effects of chemical modifications, we provide a comprehensive overview on the production of aptamers for applications in drug delivery systems, therapeutics, diagnostics, and molecular imaging.

Polymeric integration of structure-switching aptamers on transistors for histamine sensing

Aptamers that undergo large conformational rearrangements at the surface of electrolyte-gated field-effect transistor (EG-FETs)-based biosensors can overcome the Debye length limitation in physiological high ionic strength environments. For the sensitive detection of small molecules, carbon nanotubes (CNTs) that approach the dimensions of analytes of interest are promising channel materials for EG-FETs. However, functionalization of CNTs with bioreceptors using frequently reported surface modification strategies (e.g., π-π stacking), requires highly pristine CNTs deposited through methods that are incompatible with low-cost fabrication methods and flexible substrates. In this work, we explore alternative non-covalent surface chemistry to functionalize CNTs with aptamers. We harnessed the adhesive properties of poly-D-lysine (PDL), to coat the surface of CNTs and then grafted histamine-specific DNA aptamers electrostatically in close proximity to the CNT semiconducting channel. The layer-by-layer assembly was monitored by complementary techniques such as X-ray photoelectron spectroscopy, optical waveguide lightmode spectroscopy, and fluorescence microscopy. Surface characterization confirmed histamine aptamer integration into PDL-coated CNTs and revealed ∼5-fold higher aptamer surface coverage when using CNT networks with high surface areas. Specific aptamers assembled on EG-CNTFETs enabled histamine detection in undiluted high ionic strength solutions in the concentration range of 10 nM to 100 μM. Sequence specificity was demonstrated via parallel measurements with control EG-CNTFETs functionalized with scrambled DNA. Histamine aptamer-modified EG-CNTFETs showed high selectivity vs. histidine, the closest structural analog and precursor to histamine. Taken together, these results implied that target-specific aptamer conformational changes on CNTs facilitate signal transduction, which was corroborated by circular dichroism spectroscopy. Our work suggests that layer-by-layer polymer chemistry enables integration of structure-switching aptamers into flexible EG-CNTFETs for small-molecule biosensing.

Aptamer-Functionalized Interface Nanopores Enable Amino Acid-Specific Peptide Detection

Single-molecule proteomics based on nanopore technology has made significant advances in recent years. However, to achieve nanopore sensing with single amino acid resolution, several bottlenecks must be tackled: controlling nanopore sizes with nanoscale precision and slowing molecular translocation events. Herein, we address these challenges by integrating amino acid-specific DNA aptamers into interface nanopores with dynamically tunable pore sizes. A phenylalanine aptamer was used as a proof-of-concept: aptamer recognition of phenylalanine moieties led to the retention of specific peptides, slowing translocation speeds. Importantly, while phenylalanine aptamers were isolated against the free amino acid, the aptamers were determined to recognize the combination of the benzyl or phenyl and the carbonyl group in the peptide backbone, enabling binding to specific phenylalanine-containing peptides. We decoupled specific binding between aptamers and phenylalanine-containing peptides from nonspecific interactions (e.g., electrostatics and hydrophobic interactions) using optical waveguide lightmode spectroscopy. Aptamer-modified interface nanopores differentiated peptides containing phenylalanine vs. control peptides with structurally similar amino acids (i.e., tyrosine and tryptophan). When the duration of aptamer-target interactions inside the nanopore were prolonged by lowering the applied voltage, discrete ionic current levels with repetitive motifs were observed. Such reoccurring signatures in the measured signal suggest that the proposed method has the possibility to resolve amino acid-specific aptamer recognition, a step toward single-molecule proteomics.

Rational Approach to Optimizing Conformation-Switching Aptamers for Biosensing Applications

The utilization of structure-switching aptamers (SSAs) has enabled the development of novel sensing platforms for the sensitive and continuous detection of molecules. De novo development of SSAs, however, is complex and laborious. Here we describe a rational approach to SSA optimization that simultaneously improves aptamer binding affinity and introduces target-dependent conformation-switching for compatibility with real-world biosensor applications. Key structural features identified from NMR and computational modeling were used to optimize conformational switching in the presence of target, while large-scale, microarray-based mutation analysis was used to map regions of the aptamer permissive to mutation and identify combinations of mutations with stronger binding affinity. Optimizations were carried out in a relevant biofluid to ensure a seamless transition of the aptamer to a biosensing platform. Initial proof-of-concept for this approach is demonstrated with a cortisol binding aptamer but can easily be translated to other relevant aptamers. Cortisol is a hormone correlated with the stress response that has been associated with various medical conditions and is present at quantifiable levels in accessible biofluids. The ability to continuously track levels of stress in real-time via cortisol monitoring, which can be enabled by the aptamers reported here, is crucial for assessing human health and performance.

Interfacing Aptamer-Modified Nanopipettes with Neuronal Media and Ex Vivo Brain Tissue

Aptamer-functionalized biosensors exhibit high selectivity for monitoring neurotransmitters in complex environments. We translated nanoscale aptamer-modified nanopipette sensors to detect endogenous dopamine release in vitro and ex vivo. These sensors employ quartz nanopipettes with nanoscale pores (ca. 10 nm diameter) that are functionalized with aptamers that enable the selective capture of dopamine through target-specific conformational changes. The dynamic behavior of aptamer structures upon dopamine binding leads to the rearrangement of surface charge within the nanopore, resulting in measurable changes in ionic current. To assess sensor performance in real time, we designed a fluidic platform to characterize the temporal dynamics of nanopipette sensors. We then conducted differential biosensing by deploying control sensors modified with nonspecific DNA alongside dopamine-specific sensors in biological milieu. Our results confirm the functionality of aptamer-modified nanopipettes for direct measurements in undiluted complex fluids, specifically in the culture media of human-induced pluripotent stem cell-derived dopaminergic neurons. Moreover, sensor implantation and repeated measurements in acute brain slices was possible, likely owing to the protected sensing area inside nanoscale DNA-filled orifices, minimizing exposure to nonspecific interferents and preventing clogging. Further, differential recordings of endogenous dopamine released through electrical stimulation in the dorsolateral striatum demonstrate the potential of aptamer-modified nanopipettes for ex vivo recordings with unprecedented spatial resolution and reduced tissue damage.

Aptamer Renaissance for Neurochemical Biosensing

Unraveling the complexities of brain function, which is crucial for advancing human health, remains a grand challenge. This endeavor demands precise monitoring of small molecules such as neurotransmitters, the chemical messengers in the brain. In this Perspective, we explore the potential of aptamers, selective synthetic bioreceptors integrated into electronic affinity platforms to address limitations in neurochemical biosensing. We emphasize the importance of characterizing aptamer thermodynamics and target binding to realize functional biosensors in biological systems. We focus on two label-free affinity platforms spanning the micro- to nanoscale: field-effect transistors and nanopores. Integration of well-characterized structure-switching aptamers overcame nonspecific binding, a challenge that has hindered the translation of biosensors from the lab to the clinic. In a transformative era driven by neuroscience breakthroughs, technological innovations, and multidisciplinary collaborations, an aptamer renaissance holds the potential to bridge technological gaps and reshape the landscape of diagnostics and neuroscience.

Intramolecular aptamer switches

Aptamer switches as effective biosensing tools have become a focal point of research in engineered aptasensors. Intramolecular aptamer switches are more versatile, affordable, and simpler than classical "open-close" and strand displacement-based aptamer switches. Recently, many new aptamers with an overall hairpin structure have been reported. In this study, intramolecular aptamer switches were developed by adding new base pairs to the end of aptamers. The additional nucleotides can pair with the internal domains of the aptamer, causing a change in its conformation from the original secondary structure without a target. When a target binds to an aptamer, a marked change in the structure of the aptamer is expected. As models for testing this intramolecular aptamer switch idea, aptamers of oxytetracycline (OTC), 17β-estradiol (E2), and adenosine were employed. When the additional base pairs are too long, binding the target to the aptamer becomes more challenging. This research offers valuable insights into the development of intramolecular aptamer switches and their potential applications in biosensor design.

Affinity-Guided Coevolution of Aptamers for Guanine, Xanthine, Hypoxanthine, and Adenine

The simultaneous evolution of multiple aptamers can drastically increase the speed of aptamer discovery. Most previous studies used the same concentration for different targets, leading to the dominance of the libraries by one or a few aptamers and a low success rate. To foster the best aptamers to grow independently in the sequence space, it is important to (1) use low target concentrations close to their dissociation constants and (2) stop at an early round before any sequence starts to dominate. In this study, we demonstrate this affinity-guided selection concept using the capture-SELEX method to isolate aptamers for four important purines: guanine (5 μM), xanthine (50 μM), hypoxanthine (10 μM), and adenine (10 μM). The round 9 library was split, and in round 10, the four targets were individually used to elute the binding sequences. Using thioflavin T fluorescence spectroscopy and isothermal titration calorimetry, we confirmed highly selective aptamers for xanthine, guanine, and adenine. These aptamers have Kd values below 1 μM and around 100-fold selectivity against most competing analytes, and they compare favorably with existing RNA aptamers and riboswitches. A separate selection was performed using hypoxanthine alone, and no selective aptamer was achieved, even with negative selection, explaining the lack of its aptamer in our mixed selection. This affinity-guided multiplex SELEX study offers fundamental insights into aptamer selection and provides high-quality aptamers for three important purines.

Wearing the Lab: Advances and Challenges in Skin-Interfaced Systems for Continuous Biochemical Sensing

Continuous, on-demand, and, most importantly, contextual data regarding individual biomarker concentrations exemplify the holy grail for personalized health and performance monitoring. This is well-illustrated for continuous glucose monitoring, which has drastically improved outcomes and quality of life for diabetic patients over the past 2 decades. Recent advances in wearable biosensing technologies (biorecognition elements, transduction mechanisms, materials, and integration schemes) have begun to make monitoring of other clinically relevant analytes a reality via minimally invasive skin-interfaced devices. However, several challenges concerning sensitivity, specificity, calibration, sensor longevity, and overall device lifetime must be addressed before these systems can be made commercially viable. In this chapter, a logical framework for developing a wearable skin-interfaced device for a desired application is proposed with careful consideration of the feasibility of monitoring certain analytes in sweat and interstitial fluid and the current development of the tools available to do so. Specifically, we focus on recent advancements in the engineering of biorecognition elements, the development of more robust signal transduction mechanisms, and novel integration schemes that allow for continuous quantitative analysis. Furthermore, we highlight the most compelling and promising prospects in the field of wearable biosensing and the challenges that remain in translating these technologies into useful products for disease management and for optimizing human performance.

Modular Aptamer Switches for the Continuous Optical Detection of Small-Molecule Analytes in Complex Media

Aptamers are a promising class of affinity reagents because signal transduction mechanisms can be built into the reagent, so that they can directly produce a physically measurable output signal upon target binding. However, endowing the signal transduction functionality into an aptamer remains a trial-and-error process that can compromise its affinity or specificity and typically requires knowledge of the ligand binding domain or its structure. In this work, a design architecture that can convert an existing aptamer into a "reversible aptamer switch" whose kinetic and thermodynamic properties can be tuned without a priori knowledge of the ligand binding domain or its structure is described. Finally, by combining these aptamer switches with evanescent-field-based optical detection hardware that minimizes sample autofluorescence, this study demonstrates the first optical biosensor system that can continuously measure multiple biomarkers (dopamine and cortisol) in complex samples (artificial cerebrospinal fluid and undiluted plasma) with second and subsecond-scale time responses at physiologically relevant concentration ranges.

Affinity-Switchable Interaction of Biotin and Streptavidin for the Signal-ON Detection of Small Molecules

Lateral flow assay (LFA) based on gold nanoparticles (AuNPs) is a widely used analytical device for the rapid analysis of environmental hazards and biomarkers. Typically, a sandwich-type format is used for macromolecule detection, in which the appearance of a red test line indicates a positive result (Signal-ON). In contrast, small molecule detection usually relies on a competitive assay, where the absence of a test line indicates positive testing (Signal-OFF). However, such a "Signal-OFF" reading is usually detected within a narrower dynamic range and tends to generate false-negative signals at a low concentration. Moreover, inconsistent readings between macromolecule and small molecule testing might lead to misinterpretation when used by nonskilled individuals. Herein, we report a "Signal-ON" small molecule competitive assay based on the sterically modulated affinity-switchable interaction of biotin and streptavidin. In the absence of a small molecule target, a large steric hindrance can be imposed on the biotin to prevent interaction with streptavidin. However, in the presence of the small molecule target, this steric effect is removed, allowing the biotin to bind to streptavidin and generate the desired test line. In this article, we demonstrate the selective detection of two small molecule drugs, sulfonamides and trimethoprim, using this simple and modular affinity-switchable lateral flow assay (ASLFA). We believe that this affinity-switchable approach can also be adapted in drug discovery and clinical diagnosis, where the competitive assay format is always used for the rapid analysis of small molecules.

Electrochemical sensors for cortisol detection: Principles, designs, fabrication, and characterisation

Psychological stress is a major factor contributing to health discrepancies among individuals. Sustained exposure to stress triggers signalling pathways in the brain, which leading to the release of stress hormones in the body. Cortisol, a steroid hormone, is a significant biomarker for stress management due to its responsibility in the body's reply to stress. The release of cortisol in bloodstream prepares the body for a "fight or flight" response by increasing heart rate, blood pressure, metabolism, and suppressing the immune system. Detecting cortisol in biological samples is crucial for understanding its role in stress and personalized healthcare. Traditional techniques for cortisol detection have limitations, prompting researchers to explore alternative strategies. Electrochemical sensing has emerged as a reliable method for point-of-care (POC) cortisol detection. This review focuses on the progress made in electrochemical sensors for cortisol detection, covering their design, principle, and electroanalytical methodologies. The analytical performance of these sensors is also analysed and summarized. Despite significant advancements, the development of electrochemical cortisol sensors faces challenges such as biofouling, sample preparation, sensitivity, flexibility, stability, and recognition layer performance. Therefore, the need to develop more sensitive electrodes and materials is emphasized. Finally, we discussed the potential strategies for electrode design and provides examples of sensing approaches. Moreover, the encounters of translating research into real world applications are addressed.

Aptamer Conformational Dynamics Modulate Neurotransmitter Sensing in Nanopores

Aptamers that undergo conformational changes upon small-molecule recognition have been shown to gate the ionic flux through nanopores by rearranging the charge density within the aptamer-occluded orifice. However, mechanistic insight into such systems where biomolecular interactions are confined in nanoscale spaces is limited. To understand the fundamental mechanisms that facilitate the detection of small-molecule analytes inside structure-switching aptamer-modified nanopores, we correlated experimental observations to theoretical models. We developed a dopamine aptamer-functionalized nanopore sensor with femtomolar detection limits and compared the sensing behavior with that of a serotonin sensor fabricated with the same methodology. When these two neurotransmitters with comparable mass and equal charge were detected, the sensors showed an opposite electronic behavior. This distinctive phenomenon was extensively studied using complementary experimental techniques such as quartz crystal microbalance with dissipation monitoring, in combination with theoretical assessment by the finite element method and molecular dynamic simulations. Taken together, our studies demonstrate that the sensing behavior of aptamer-modified nanopores in detecting specific small-molecule analytes correlates with the structure-switching mechanisms of individual aptamers. We believe that such investigations not only improve our understanding of the complex interactions occurring in confined nanoscale environments but will also drive further innovations in biomimetic nanopore technologies.

Quantitative Comparison of Capture-SELEX, GO-SELEX, and Gold-SELEX for Enrichment of Aptamers

Since 1990, numerous methods for aptamer selection have been developed, although a quantitative comparison of their sequence enrichment is lacking. In this study, we compared the enrichment factors of three library-immobilization SELEX methods (capture-SELEX, GO-SELEX, and gold-SELEX). We used a spiked library that contained multiple DNA aptamers with different affinities for adenosine. The aptamer separation efficiency was measured using qPCR, and all of the three methods showed a very low DNA release (<1%) in the presence of 100 μM adenosine. Among these, barely any DNA was released from the gold nanoparticles. Deep sequencing was used to compare the enrichment of three aptamers: Ade1301, Ade1304, and the classical aptamer. Enrichment up to 30 to 50-fold was observed only for the capture-SELEX method, whereas the other two methods showed enrichment factors below 1. By blocking the primer-binding regions of the library, GO-SELEX reached up to 14% enrichment. Finally, the enrichment of aptamers based on nonspecific release and target-induced release was discussed, and the advantages of capture-SELEX were rationalized. Taken together, these results indicate that capture-SELEX is a much more efficient method for enriching aptamers.

Terminal Alkyne-Modified DNA Aptamers with Enhanced Protein Binding Affinities

Nucleic acid-based receptors, known as aptamers, are relatively fast to discover and manufacture but lack the diverse functional groups of protein receptors (e.g., antibodies). The binding properties of DNA aptamers can be enhanced by attaching abiotic functional groups; for example, aromatic groups such as naphthalene slow dissociation from proteins. Although the terminal alkyne is a π-electron-rich functional group that has been used in small molecule drugs to enhance binding to proteins through noncovalent interactions, it remains unexplored for enhancing DNA aptamer binding affinity. Here, we demonstrate the utility of the terminal alkyne for improving the binding of DNA to proteins. We prepared a library of 256 terminal-alkyne-bearing variants of HD22, a DNA aptamer that binds the protein thrombin with nanomolar affinity. After a one-step thrombin-binding selection, a high-affinity aptamer containing two alkynes was discovered, exhibiting 3.2-fold tighter thrombin binding than the corresponding unmodified sequence. The tighter binding was attributable to a slower rate of dissociation from thrombin (5.2-fold slower than HD22). Molecular dynamics simulations with enhanced sampling by Replica Exchange with Solute Tempering (REST2) suggest that the π-electron-rich alkyne interacts with an asparagine side chain N-H group on thrombin, forming a noncovalent interaction that stabilizes the aptamer-protein interface. Overall, this work represents the first case of terminal alkynes enhancing the binding properties of an aptamer and underscores the utility of the terminal alkyne as an atom economical π-electron-rich functional group to enhance binding affinity with minimal steric perturbation.

Capture-SELEX for Chloramphenicol Binding Aptamers for Labeled and Label-Free Fluorescence Sensing

Chloramphenicol (CAP) is a potent antibiotic. Due to its side effects, CAP is currently banned in most countries, but it is still found in many food products and in the environment. Developing aptamer-based biosensors for the detection of CAP has interested many researchers. While both RNA and DNA aptamers were previously reported for CAP, they were all obtained by immobilization of the CAP base, which omitted the two chlorine atoms. In this work, DNA aptamers were selected using the library-immobilized method and free unmodified CAP. Three families of aptamers were obtained, and the best one named CAP1 showed a dissociation constant (Kd) of 9.8 μM using isothermal titration calorimetry (ITC). A fluorescent strand-displacement sensor showed a limit of detection (LOD) of 14 μM CAP. Thioflavin T (ThT) staining allowed label-free detection of CAP with a LOD of 1 μM in buffer, 1.8 μM in Lake Ontario water, and 3.6 μM in a wastewater sample. Comparisons were made with previously reported aptamers, and ITC failed to show binding of a previously reported 80-mer aptamer. Due to the small size and well-defined secondary structures of CAP1, this aptamer will find analytical applications for environmental and food monitoring.

Cross-Binding of Four Adenosine/ATP Aptamers to Caffeine, Theophylline, and Other Methylxanthines

The classical DNA aptamer for adenosine and ATP was selected twice using ATP as the target in 1995 and 2005, respectively. In 2022, this motif appeared four more times from selections using adenosine, ATP, theophylline, and caffeine as targets, suggesting that this aptamer can also bind methylxanthines. In this work, using thioflavin T fluorescence spectroscopy, this classical DNA aptamer showed Kd values for adenosine, theophylline, and caffeine of 9.5, 101, and 131 μM, respectively, and similar Kd values were obtained using isothermal titration calorimetry. Binding to the methylxanthines was also observed for the newly selected Ade1301 aptamer but not for the Ade1304 aptamer. The RNA aptamer for ATP also had no binding to the methylxanthines. Molecular dynamics simulations were performed using the classical DNA and RNA aptamers based on their NMR structures, and the simulation results were consistent with the experimental observations, explaining the selectivity profiles. This study suggests that a broader range of target analogues need to be tested for aptamers. For the detection of adenosine and ATP, the Ade1304 aptamer is a better choice due to its better selectivity.

A non-invasive wearable stress patch for real-time cortisol monitoring using a pseudoknot-assisted aptamer

Stress is part of everyone's life and is exacerbated by traumatic events such as pandemics, disasters, violence, lifestyle changes, and health disorders. Chronic stress has many detrimental health effects and can even be life-threatening. Long-term stress monitoring outside of a hospital is often accomplished by measuring heart rate variability. While easy to measure, this digital biomarker has low specificity, greatly limiting its utility. To address this shortcoming, we report a non-invasive, wearable biomolecular sensor to monitor cortisol levels in sweat. Cortisol is a neuroendocrine hormone that regulates homeostasis as part of the stress pathway. Cortisol is detected using an electrochemical sensor functionalized with a pseudoknot-assisted aptamer and a flexible microfluidic sweat sampling system. The skin-worn microfluidic sampler provides rapid sweat collection while separating old and new sweat. The conformation-switching aptamer provides high specificity towards cortisol while being regenerable, allowing it to monitor temporal changes continuously. The aptamer was engineered to add a pseudoknot, restricting it to only two states, thus minimizing the background signal and enabling high sensitivity. An electrochemical pH sensor allows pH-corrected amperometric measurements. Device operation was demonstrated invitro with a broad linear dynamic range (1 pM - 1 μM) covering the physiological range and a sub-picomolar (0.2 pM) limit of detection in sweat. Real-time, on-body measurements were collected from human subjects using an induced stress protocol, demonstrating in-situ signal regeneration and the ability to detect dynamic cortisol fluctuations continuously for up to 90 min. The reported device has the potential to improve prognosis and enable personalized treatments.

Surfactant-Assisted Label-Free Fluorescent Aptamer Biosensors and Binding Assays

Using DNA staining dyes such as SYBR Green I (SGI) and thioflavin T (ThT) to perform label-free detection of aptamer binding has been performed for a long time for both binding assays and biosensor development. Since these dyes are cationic, they can also adsorb to the wall of reaction vessels leading to unstable signals and even false interpretations of the results. In this work, the stability of the signal was first evaluated using ThT and the classic adenosine aptamer. In a polystyrene microplate, a drop in fluorescence was observed even when non-binding targets or water were added, whereas a more stable signal was achieved in a quartz cuvette. Equilibrating the system can also improve signal stability. In addition, a few polymers and surfactants were also screened, and 0.01% Triton X-100 was found to have the best protection effect against fluorescence signal decrease due to dye adsorption. Three aptamers for Hg²⁺, adenosine, and cortisol were tested for their sensitivity and signal stability in the absence and presence of Triton X-100. In each case, the sensitivity was similar, whereas the signal stability was better for the surfactant. This study indicates that careful control experiments need to be designed to ensure reliable results and that the reliability can be improved by using Triton X-100 and a long equilibration time.

Aptamer-functionalized capacitive biosensors

The growing use of aptamers as target recognition elements in label-free biosensing necessitates corresponding transducers that can be used in relevant environments. While popular in many fields, capacitive sensors have seen relatively little, but growing use in conjunction with aptamers for sensing diverse targets. Few reports have shown physiologically relevant sensitivity in laboratory conditions and a cohesive picture on how target capture modifies the measured capacitance has been lacking. In this review, we assess the current state of the field in three areas: small molecule, protein, and cell sensing. We critically analyze the proposed hypotheses on how aptamer-target capture modifies the capacitance, as many mechanistic postulations appear to conflict between published works. As the field matures, we encourage future works to investigate individual aptamer-target interactions and to interrogate the physical mechanisms leading to measured changes in capacitance. To this point, we provide recommendations on best practices for developing aptasensors with a particular focus on considerations for biosensing in clinical settings.

Simultaneous Detection of L-Lactate and D-Glucose Using DNA Aptamers in Human Blood Serum

L-lactate is a key metabolite indicative of physiological states, glycolysis pathways, and various diseases such as sepsis, heart attack, lactate acidosis, and cancer. Detection of lactate has been relying on a few enzymes that need additional oxidants. In this work, DNA aptamers for L-lactate were obtained using a library-immobilization selection method and the highest affinity aptamer reached a K_d of 0.43 mM as determined using isothermal titration calorimetry. The aptamers showed up to 50-fold selectivity for L-lactate over D-lactate and had little responses to other closely related analogs such as pyruvate or 3-hydroxybutyrate. A fluorescent biosensor based on the strand displacement method showed a limit of detection of 0.55 mM L-lactate, and the sensor worked in 90 % serum. Simultaneous detection of L-lactate and D-glucose in the same solution was achieved. This work has broadened the scope of aptamers to simple metabolites and provided a useful probe for continuous and multiplexed monitoring.

An aptamer array for discriminating tetracycline antibiotics based on binding-enhanced intrinsic fluorescence

Tetracyclines are a class of antibiotics with a similar four-ringed structure. Due to this structural similarity, they are not easily differentiated from each other. We recently selected aptamers using oxytetracycline as a target and focused on an aptamer named OTC5, which has similar affinities for oxytetracycline (OTC), tetracycline (TC), and doxycycline (DOX). Tetracyclines exhibit an intrinsic fluorescence that is enhanced upon aptamer binding, allowing convenient binding assays and label-free detection. In this study, we analyzed the top 100 sequences from the previous selection library. Three other sequences were found to differentiate between different tetracyclines (OTC, DOX, and TC) by the selective enhancement of their intrinsic fluorescence. Among them, the OTC43 aptamer was more selective for OTC with a limit of detection (LOD) of 0.7 nM OTC, OTC22 was more selective for DOX (LOD 0.4 nM), and OTC2 was more selective for TC (0.3 nM). Using these three aptamers to form a sensor array, principal component analysis was able to discriminate between the three tetracyclines from each other and from the other molecules. This group of aptamers could be useful as probes for the detection of tetracycline antibiotics.

Switchable DNA Photocatalysts for Radical Polymerization Controlled by Chemical Stimuli

Polymerization catalysts that activate in response to specific chemical triggers offer spatial and temporal control over polymer synthesis, facilitating the development of responsive materials and custom polymer coatings. However, existing catalysts switch their activity through mechanisms that are not generalizable to chemically diverse stimuli. To approach the level of control exhibited in biological polymer synthesis, switchable polymerization catalysts need to be configurable for activation in response to diverse chemical stimuli. Here, we combine synthetic photocatalysts with conformation-switching DNA aptamers to create polymerization catalysts that respond to diverse chemical stimuli. We use the secondary structure of DNA to bring a photocatalyst and quencher dye into proximity, turning off photocatalysis. The DNA structure can be precisely designed to change conformation in response to a molecular trigger, moving the photocatalyst far from the quencher and activating photocatalysis. We show these photocatalysts can initiate free-radical polymerization to form bulk hydrogels in response to complementary DNA, a metal ion (Zn2+), or small molecules (glucose and hydrocortisone). We demonstrate the biocompatibility of these switchable photocatalysts by triggering their activation on the surface of yeast cells. Finally, we perform reversible-deactivation radical polymerization through photoinduced electron/energy transfer reversible addition-fragmentation chain-transfer in a dual-stimulus manner, in which catalytic activity is regulated reversibly by photoirradiation and the conformational state of the DNA catalyst. These results demonstrate that DNA conformational changes triggered by chemically diverse stimuli can regulate the activity of radical polymerization photocatalysts. This platform offers new capabilities in spatially and temporally controlled polymer synthesis, with potential applications in diagnostics, sensing, and environmentally responsive materials.

Machine Learning Directed Aptamer Search from Conserved Primary Sequences and Secondary Structures

Computer-aided prediction of aptamer sequences has been focused on primary sequence alignment and motif comparison. We observed that many aptamers have a conserved hairpin, yet the sequence of the hairpin can be highly variable. Taking such secondary structure information into consideration, a new algorithm combining conserved primary sequences and secondary structures is developed, which combines three scores based on sequence abundance, stability, and structure, respectively. This algorithm was used in the prediction of aptamers from the caffeine and theophylline selections. In the late rounds of the selections, when the libraries were converged, the predicted sequences matched well with the most abundant sequences. When the libraries were far from convergence and the sequences were deemed challenging for traditional analysis methods, this algorithm still predicted aptamer sequences that were experimentally verified by isothermal titration calorimetry. This algorithm paves a new way to look for patterns in aptamer selection libraries and mimics the sequence evolution process. It will help shorten the aptamer selection time and promote the biosensor and chemical biology applications of aptamers.

Salt-Toggled Capture Selection of Uric Acid Binding Aptamers

Uric acid is the end-product of purine metabolism in humans and an important biomarker for many diseases. To achieve the detection of uric acid without using enzymes, we previously selected a DNA aptamer for uric acid with a K_d of 1 μM but the aptamer required multiple Na⁺ ions for binding. Saturated binding was achieved with around 700 mM Na⁺ and the binding at the physiological condition was much weaker. In this work, a new selection was performed by alternating Mg²⁺ -containing buffers with Na⁺ and Li⁺ . After 13 rounds of selection, a new aptamer sequence named UA-Mg-1 was obtained. Isothermal titration calorimetry confirmed aptamer binding in both selection buffers, and the K_d was around 8 μM. The binding of UA-Mg-1 to UA required only Mg²⁺ . This is an indicator of successful switching of metal dependency via the salt-toggled selection method. The UA-Mg-1 aptamer was engineered into a fluorescent biosensor based on the strand-displacement assay with a limit of detection of 0.5 μM uric acid in the selection buffer. Finally, comparison with the previously reported Na⁺ -dependent aptamer and a xanthine/uric acid riboswitch was also made.

Systematic Study of in Vitro Selection Stringency Reveals How To Enrich High-Affinity Aptamers

Aptamers are oligonucleotide receptors with great potential for sensing and therapeutic applications. They are isolated from random libraries through an in vitro method termed systematic evolution of ligands by exponential enrichment (SELEX). Although SELEX-based methods have been widely employed over several decades, many aspects of the experimental process remain poorly understood in terms of how to adjust the selection conditions to obtain aptamers with the desired set of binding characteristics. As a result, SELEX is often performed with arbitrary parameters that tend to produce aptamers with insufficient affinity and/or specificity. Having a better understanding of these basic principles could increase the likelihood of obtaining high-quality aptamers. Here, we have systematically investigated how altering the selection stringency in terms of target concentration─which is essentially the root source of selection pressure for aptamer isolation─affects the outcome of SELEX. By performing four separate trials of SELEX for the same small-molecule target, we experimentally prove that the use of excessively high target concentrations promotes enrichment of low-affinity binders while also suppressing the enrichment of high-affinity aptamers. These findings should be broadly applicable across SELEX methods, given that they share the same core operating principle, and will be crucial for guiding selections to obtain high-quality aptamers in the future.

Capture-SELEX of DNA Aptamers for Estradiol Specifically and Estrogenic Compounds Collectively

Estrogenic compounds such as estrone (E1), 17β-estradiol (E2), and 17α-ethynylestradiol (EE2) are serious environmental contaminants due to their potent biological activities. At least six selections were previously reported to obtain DNA aptamers for E2, highlighting its environmental importance. A careful analysis revealed that the previous aptamers either are too long or do not bind optimally. Herein, a series of new aptamers were obtained from the capture-SELEX method with dissociation constants down to 30 nM as determined by isothermal titration calorimetry (ITC). Two aptamers were converted to structure-switching fluorescent biosensors, which achieved a limit of detection down to 3.3 and 9.1 nM E2, respectively. One aptamer showed similar binding affinities to all the three estrogens, while the other aptamer is more selective for E2. Both aptamers required Mg²⁺ for binding. The proposed sensors were successfully applied in the determination of E2 in wastewater. Moreover, comparisons were made with previous aptamers based on primary sequence alignment and secondary structures. Among previously reported truncated aptamers, ITC showed binding only in one of them. The newly selected aptamers have the combined advantages of small size and high affinities.

Using the Intrinsic Fluorescence of DNA to Characterize Aptamer Binding

The reliable, readily accessible and label-free measurement of aptamer binding remains a challenge in the field. Recent reports have shown large changes in the intrinsic fluorescence of DNA upon the formation of G-quadruplex and i-motif structures. In this work, we examined whether DNA intrinsic fluorescence can be used for studying aptamer binding. First, DNA hybridization resulted in a drop in the fluorescence, which was observed for A30/T30 and a 24-mer random DNA sequence. Next, a series of DNA aptamers were studied. Cortisol and Hg²⁺ induced fluorescence increases for their respective aptamers. For the cortisol aptamer, the length of the terminal stem needs to be short to produce a fluorescence change. However, caffeine and adenosine failed to produce a fluorescence change, regardless of the stem length. Overall, using the intrinsic fluorescence of DNA may be a reliable and accessible method to study a limited number of aptamers that can produce fluorescence changes.

Metal and pH-Dependent Aptamer Binding of Tetracyclines Enabling Highly Sensitive Fluorescence Sensing

Tetracyclines are a widely used group of antibiotics, many of which are currently only used in veterinary medicine and animal husbandry due to their adverse side effects. For the detection of tetracyclines, we previously reported a DNA aptamer named OTC5 that binds to tetracycline, oxytetracycline, and doxycycline with similar KD’s of ~100 nM. Tetracyclines have an intrinsic fluorescence that is enhanced upon binding to OTC5, which can be used as a label-free and dye-free sensor. In this work, the effect of pH and metal ions on the sensor was studied. Mg2+ ions are required for the binding of OTC5 to its target with an optimal concentration of 2 mM. Other metal ions including Ca2+ and Zn2+ can also support aptamer binding. Although Mn2+ barely supported binding, the binding can be rescued by Mg2+. ITC studies confirmed that OTC5 had a KD of 0.2 μM at a pH of 6.0 and 0.03 μM at a pH of 8.3. Lower pH (pH 6) showed better fluorescence enhancement than higher pH (pH 8.3), although a pH of 6.0 had slightly higher KD values. Under optimized sensing conditions, sensors with limit of detections (LODs) of 0.1–0.7 nM were achieved for tetracycline, oxytetracycline, and doxycycline, which are up to 50-fold lower than previously reported. Milk samples were also tested yielding an LOD of 16 nM oxytetracycline at a pH of 6.0.

A DNA Aptamer for Theophylline with Ultrahigh Selectivity Reminiscent of the Classic RNA Aptamer

Since the report of the RNA aptamer for theophylline, theophylline has become a key molecule in chemical biology for designing RNA switches and riboswitches. In addition, theophylline is an important drug for treating airway diseases including asthma. The classic RNA aptamer with excellent selectivity for theophylline has been used to design biosensors, although DNA aptamers are more desirable for stability and cost considerations. In this work, we selected DNA aptamers for theophylline, and all the top sequences shared the same binding motifs. Binding was confirmed using isothermal titration calorimetry and a nuclease digestion assay, showing a dissociation constant (K_d) around 0.5 μM theophylline. The Theo2201 aptamer can be truncated down to 23-mer while still has a K_d of 9.8 μM. The selectivity for theophylline over caffeine is around 250,000-fold based on a strand-displacement assay, which was more than 20-fold higher compared to the classic RNA aptamer. For other tested analogs, the DNA aptamer also showed better selectivity. Using the structure-switching aptamer sensor design method, a detection limit of 17 nM theophylline was achieved in the selection buffer, and a detection limit of 31 nM was obtained in 10% serum.

Label-free and Dye-free Fluorescent Sensing of Tetracyclines Using a Capture-Selected DNA Aptamer

Tetracyclines are a group of important antibiotics with a common four-ring scaffold. While most tetracyclines are currently used only in animals, their leaching into the environment and residues in food have caused health concerns. Aptamers are an attractive way to detect tetracyclines, and all previously reported aptamers for tetracyclines were obtained by immobilizing target molecules. In this work, we selected a few DNA aptamers by immobilizing the DNA library using oxytetracycline as the target. We obtained new aptamers with no overlapping sequences compared to the previously reported ones, and a representative sequence named OTC5 had a dissociation constant of 147 nM measured by isothermal titration calorimetry. Similar binding affinities were also observed with tetracycline and doxycycline. Because tetracyclines are fluorescent and their fluorescence intensity was enhanced by binding to the aptamers, a label-free and dye-free fluorescent biosensor was developed with a detection limit of 25 nM oxytetracycline. The sensor was able to detect targets in milk after extraction. Fluorescence polarization measurement showed that this aptamer is insensitive to sodium concentration but requires magnesium. Finally, a strand-displacement biosensor was designed, and it has a detection limit of 1.2 μM oxytetracycline.

2-Aminopurine Fluorescence Spectroscopy for Probing a Glucose Binding Aptamer

Glucose is the most important analyte for biosensors. Recently a DNA aptamer was reported allowing binding-based detection. However, due to a relatively weak binding affinity, it is difficult to perform binding assays to understand the property of this aptamer. In this work, we replaced the only adenine base in the aptamer binding pocket with a 2-aminopurine (2AP) and used fluorescence spectroscopy to study glucose binding. In the selection buffer, glucose increased the 2AP fluorescence with a Kd of 15.0 mM glucose, which was comparable with the 10 mM Kd previously reported using the strand displacement assay. The binding required two Na+ ions or one Mg2+ that cannot be replaced by Li+ or K+. The binding was weaker at higher temperature and its van't Hoff plot indicated enthalpy-driven binding. While monosaccharides failed to achieve saturated binding even at high concentrations, two glucose-containing disaccharides, namely trehalose and sucrose, reached a similar fluorescence level as glucose although with over 10-fold higher Kd's. Detection limits in both the selection buffer (0.9 mM) and in artificial interstitial fluids (6.0 mM) were measured.

Selection, Characterization, and Optimization of DNA Aptamers against Challenging Marine Biotoxin Gymnodimine-A for Biosensing Application

Gymnodimines (GYMs), belonging to cyclic imines (CIs), are characterized as fast-acting toxins, and may pose potential risks to human health and the aquaculture industry through the contamination of sea food. The existing detection methods of GYMs have certain defects in practice, such as ethical problems or the requirement of complicated equipment. As novel molecular recognition elements, aptamers have been applied in many areas, including the detection of marine biotoxins. However, GYMs are liposoluble molecules with low molecular weight and limited numbers of chemical groups, which are considered as "challenging" targets for aptamers selection. In this study, Capture-SELEX was used as the main strategy in screening aptamers targeting gymnodimine-A (GYM-A), and an aptamer named G48nop, with the highest KD value of 95.30 nM, was successfully obtained by screening and optimization. G48nop showed high specificity towards GYM-A. Based on this, a novel aptasensor based on biolayer interferometry (BLI) technology was established in detecting GYM-A. This aptasensor showed a detection range from 55 to 1400 nM (linear range from 55 to 875 nM) and a limit of detection (LOD) of 6.21 nM. Spiking experiments in real samples indicated the recovery rate of this aptasensor, ranging from 96.65% to 109.67%. This is the first study to report an aptamer with high affinity and specificity for the challenging marine biotoxin GYM-A, and the new established aptasensor may be used as a reliable and efficient tool for the detection and monitoring of GYMs in the future.

Wearable aptamer-field-effect transistor sensing system for noninvasive cortisol monitoring

Wearable technologies for personalized monitoring require sensors that track biomarkers often present at low levels. Cortisol—a key stress biomarker—is present in sweat at low nanomolar concentrations. Previous wearable sensing systems are limited to analytes in the micromolar-millimolar ranges. To overcome this and other limitations, we developed a flexible field-effect transistor (FET) biosensor array that exploits a previously unreported cortisol aptamer coupled to nanometer-thin-film In₂O₃ FETs. Cortisol levels were determined via molecular recognition by aptamers where binding was transduced to electrical signals on FETs. The physiological relevance of cortisol as a stress biomarker was demonstrated by tracking salivary cortisol levels in participants in a Trier Social Stress Test and establishing correlations between cortisol in diurnal saliva and sweat samples. These correlations motivated the development and on-body validation of an aptamer-FET array–based smartwatch equipped with a custom, multichannel, self-referencing, and autonomous source measurement unit enabling seamless, real-time cortisol sweat sensing.

Novel ssDNA aptamer-based fluorescence sensor for perfluorooctanoic acid detection in water

Per- and polyfluoroalkyl substances (PFAS) are widely detected environmental contaminants, and there is a great need for development of sensor technologies for rapid and continuous monitoring of PFAS. In this study, we have developed fluorescence based aptasensor that can possibly monitor perfluorooctanoic acid (PFOA) in water with limit of detection (LOD) of 0.17 μM. This is first to report the successful isolation of PFAS binding ssDNA aptamers. The obtained aptamer selectively binds PFOA with dissociation constant (K_D) of 5.5 μM. Specific aptamer binding sites to PFOA were identified and the length of the fluorinated carbons was a key binding factor rather than the functional group. The aptamer binding to structurally similar PFAS compounds (i.e., perfluorocarboxylic acids and perfluorosulfonic acids with 4-8 carbon chains) was also investigated; the aptamer K_D values were 6.5 and 3.3 μM for perfluoroheptanoic acid and perfluorohexanesulfonic acid, respectively, while other analogs did not bind to the aptamer. The presence of major inorganic ions and dissolved organic matter had negligible influences on the aptamer performance (<14% at a 10 mM concentration), and the aptamer performance was also robust in real wastewater effluent conditions, with a K_D of 7.4 μM for PFOA. Fluorescence-based aptasensor developed in this study is adequate in monitoring PFOA levels in water contaminated with the accident spills and heavy usage of fire-fighting foams near the industrial sites and military bases. More importantly, the study opens up new capability of aptasensors to efficiently monitor the trace amount of various PFAS compounds and other fluorinated alternatives in natural and engineered water environments.