Rare-Earth Single-Atom La-N Charge-Transfer Bridge on Carbon Nitride for Highly Efficient and Selective Photocatalytic CO2 Reduction

Rare-Earth Lanthanum-Evoked Amorphization and Optimization to Boost Ambient Nitrogen Fixation over Single-Atom Catalysts

Single-atom catalysts (SACs) have been widely studied in a variety of electrocatalysis. However, its application in the electrocatalytic nitrogen reduction reaction (NRR) field still suffers from unsatisfactory performance, due to the sluggish mass transfer and significant kinetic barriers. Herein, a novel rare-earth-lanthanum-evoked optimization strategy is proposed to boost ambient NRR over SACs. The incorporation of La with a large atomic radius tends to break the atomic long-range order and trigger the amorphization of SACs, endowing a greater density of dangling bonds that could modify affinity for reactants and adsorbates. Moreover, with unique 5d16s2 valence-electron configurations, its presence could further enrich the electron density and enhance the intrinsic activity of single-metal center via the valence orbital coupling. As expected, the La-modified catalyst presents excellent activity toward the electrochemical NRR, delivering a maximum ammonia yield rate of 33.91 μg h-1 mg-1 and a remarkable Faradaic efficiency of 53.82%.

Preferential growth and electron trap synergistically promoting photoreduction CO2 of Tm ion doping bismuth titanate nanosheets

In this study, we prepared two-dimensional Bi4Ti3O12 nanosheets doped with rare earth ions. The experimental results show that Bi4-xTmxTi3O12 exhibits the highest reduction performance among various rare earth doped Bi4Ti3O12 materials, with a CO yield of 7.25 μmol g-1h-1. Furthermore, a delayed reaction in Bi3.97Tm0.03Ti3O12 is observed upon a cessation of light irradiation. Theoretical calculations reveal that the introduction of Tm ion not only reduces the surface energy of (001) plane and make it preferential growth in Bi4Ti3O12, but also brings the intervening energy level of Tm ion (4f and 4d mixed orbital), which is closer to the conduction band of Bi4Ti3O12 and facilitates charge carrier accumulation in trap states. The electrons retained in the shallow traps promote the hysteresis reaction following a cessation of illumination. This work provides further insights into elucidating precise reduction reaction mechanisms underlying rare earth dopant on photocatalysts. This research provides enhanced insights into unraveling the precise reduction reaction mechanisms influenced by rare earth dopants in photocatalysts.

Noble-Metal-Free Single- and Dual-Atom Catalysts for Artificial Photosynthesis

Artificial photosynthesis enables direct solar-to-chemical energy conversion aimed at mitigating environmental pollution and producing solar fuels and chemicals in a green and sustainable approach, and efficient, robust, and low-cost photocatalysts are the heart of artificial photosynthesis systems. As an emerging new class of cocatalytic materials, single-atom catalysts (SACs) and dual-atom catalysts (DACs) have received a great deal of current attention due to their maximal atom utilization and unique photocatalytic properties, whereas noble-metal-free ones impart abundance, availability, and cost-effectiveness allowing for scalable implementation. This review outlines the fundamental principles and synthetic methods of SACs and DACs and summarizes the most recent advances in SACs (Co, Fe, Cu, Ni, Bi, Al, Sn, Er, La, Ba, etc.) and DACs (CuNi, FeCo, InCu, KNa, CoCo, CuCu, etc.) based on non-noble metals, confined on an arsenal of organic or inorganic substrates (polymeric carbon nitride, metal oxides, metal sulfides, metal-organic frameworks, carbon, etc.) acting as versatile scaffolds in solar-light-driven photocatalytic reactions, including hydrogen evolution, carbon dioxide reduction, methane conversion, organic synthesis, nitrogen fixation, hydrogen peroxide production, and environmental remediation. The review concludes with the challenges, opportunities, and future prospects of noble-metal-free SACs and DACs for artificial photosynthesis.

A Novel Perspective on Enhancing Photocatalytic Performance through the Synergistic Effect of Nd Single Atoms and Heterostructures

There are few reports on lanthanide single atom modified catalysts, as the role of the 4f levels in photocatalysis is difficult to explain clearly. Here, the synergistic effect of 4f levels of Nd and heterostructures is studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations based on the construction of Nd single atom modified black phosphorus/g-C3N4 (BP/CN) heterojunctions. As expected, the generation rates of CO and CH4 of the optimized heterostructure are 7.44 and 6.85 times higher than those of CN, and 8.43 and 9.65 times higher than those of BP, respectively. The Nd single atoms can not only cause surface reconstruction and regulate the active sites of BP, but also accelerate charge separation and transfer, further suppressing the recombination of electron-hole pairs. The electrons can transfer from g-C3N4:Nd to BP:Nd, with a transfer time of ≈11.4 ps, while the radiation recombination time of electron-hole pairs of g-C3N4 is ≈26.13 µs, indicating that the construction of heterojunctions promotes charge transfer. The 2P1/2/2G9/2/4G7/2/2H11/2/4F7/2→4I9/2 emissions from Nd3+ can also be absorbed by heterostructures, which improves the utilization of light. The energy change of the key rate measurement step CO2 *→COOH* decreases through Nd single atom modification.

Rare-earth Element-based Electrocatalysts Designed for CO2 Electro-reduction

Electrochemical CO2 reduction presents a promising approach for synthesizing fuels and chemical feedstocks using renewable energy sources. Although significant advancements have been made in the design of catalysts for CO2 reduction reaction (CO2RR) in recent years, the linear scaling relationship of key intermediates, selectivity, stability, and economical efficiency are still required to be improved. Rare earth (RE) elements, recognized as pivotal components in various industrial applications, have been widely used in catalysis due to their unique properties such as redox characteristics, orbital structure, oxygen affinity, large ion radius, and electronic configuration. Furthermore, RE elements could effectively modulate the adsorption strength of intermediates and provide abundant metal active sites for CO2RR. Despite their potential, there is still a shortage of comprehensive and systematic analysis of RE elements employed in the design of electrocatalysts of CO2RR. Therefore, the current approaches for the design of RE element-based electrocatalysts and their applications in CO2RR are thoroughly summarized in this review. The review starts by outlining the characteristics of CO2RR and RE elements, followed by a summary of design strategies and synthetic methods for RE element-based electrocatalysts. Finally, an overview of current limitations in research and an outline of the prospects for future investigations are proposed.

Surface Engineered Single-atom Systems for Energy Conversion

Single-atom catalysts (SACs) are demonstrated to show exceptional reactivity and selectivity in catalytic reactions by effectively utilizing metal species, making them a favorable choice among the different active materials for energy conversion. However, SACs are still in the early stages of energy conversion, and problems like agglomeration and low energy conversion efficiency are hampering their practical applications. Substantial research focus on support modifications, which are vital for SAC reactivity and stability due to the intimate relationship between metal atoms and support. In this review, a category of supports and a variety of surface engineering strategies employed in SA systems are summarized, including surface site engineering (heteroatom doping, vacancy introducing, surface groups grafting, and coordination tunning) and surface structure engineering (size/morphology control, cocatalyst deposition, facet engineering, and crystallinity control). Also, the merits of support surface engineering in single-atom systems are systematically introduced. Highlights are the comprehensive summary and discussions on the utilization of surface-engineered SACs in diversified energy conversion applications including photocatalysis, electrocatalysis, thermocatalysis, and energy conversion devices. At the end of this review, the potential and obstacles of using surface-engineered SACs in the field of energy conversion are discussed. This review aims to guide the rational design and manipulation of SACs for target-specific applications by capitalizing on the characteristic benefits of support surface engineering.

Engineering High-Spin State Cobalt Cations in Sulfide Spinel for Enhancing Water Oxidation

The spin states of active sites have a significant impact on the adsorption/desorption ability of the reaction intermediates during the oxygen evolution reaction (OER). Sulfide spinel is not generally considered a highly efficient OER catalyst owing to the low spin state of Co3+ and the lack of unpaired electrons available for adsorption of reaction intermediates. Herein, it is proposed a novel Nd-evoked valence electronic adjustment strategy to engineer the spin state of Co ions. The unique f-p-d orbital electronic coupling effect stimulates the rearrangement of Co d orbital electrons and increases the eg electron filling to achieve high-spin state Co ions, which promotes charge transport by propagating a spin channel and generates a high number of active sites for intermediate adsorption. The optimized CuCo1.75 Nd0.25 S4 catalyst exhibits outstanding electrocatalytic properties with a low overpotential of 320 mV at 500 mA cm-2 and a 48 h stability at 300 mA cm-2 . In situ synchrotron radiation infrared spectra confirm the quick accumulation of key *OOH and *O intermediates. This work deepens the comprehensive understanding of the relationship between OER activity and spin configurations of Co ions and offers a new design strategy for spinel compound catalysts.

Research progress on photocatalytic reduction of CO2 based on ferroelectric materials

Transforming CO2 into renewable fuels or valuable carbon compounds could be a practical means to tackle the issues of global warming and energy crisis. Photocatalytic CO2 reduction is more energy-efficient and environmentally friendly, and offers a broader range of potential applications than other CO2 conversion techniques. Ferroelectric materials, which belong to a class of materials with switchable polarization, are attractive candidates as catalysts due to their distinctive and substantial impact on surface physical and chemical characteristics. This review provides a concise overview of the fundamental principles underlying photocatalysis and the mechanism involved in CO2 reduction. Additionally, the composition and properties of ferroelectric materials are introduced. This review expands on the research progress in using ferroelectric materials for photocatalytic reduction of CO2 from three perspectives: directly as a catalyst, by modification, and construction of heterojunctions. Finally, the future potential of ferroelectric materials for photocatalytic CO2 reduction is presented. This review may be a valuable guide for creating reasonable and more effective photocatalysts based on ferroelectric materials.

Contemporary advances in photocatalytic CO2 reduction using single-atom catalysts supported on carbon-based materials

The persistent issue of CO2 emissions and their subsequent impact on the Earth's atmosphere can be effectively addressed through the utilization of efficient photocatalysts. Employing a sustainable carbon cycle via photocatalysis presents a promising technology for simultaneously managing the greenhouse effect and the energy dilemma. However, the efficiency of energy conversion encounters limitations due to inadequate carrier utilization and a deficiency of reactive sites. Single-atom catalysts (SACs) have demonstrated exceptional performance in efficiently addressing the aforementioned challenges. This review article commences with an overview of SAC types, structures, fundamentals, synthesis strategies, and characterizations, providing a logical foundation for the design and properties of SACs based on the correlation between their structure and efficiency. Additionally, we delve into the general mechanism and the role of SACs in photocatalytic CO2 reduction. Furthermore, we furnish a comprehensive survey of the latest advancements in SACs concerning their capacity to enhance efficiency, long-term stability, and selectivity in CO2 reduction. Carbon-structured support materials such as covalent organic frameworks (COFs), graphitic carbon nitride (g-C3N4), metal-organic frameworks (MOFs), covalent triazine frameworks (CTFs), and graphene-based photocatalysts have garnered significant attention due to their substantial surface area, superior conductivity, and chemical stability. These carbon-based materials are frequently chosen as support matrices for anchoring single metal atoms, thereby enhancing catalytic activity and selectivity. The motivation behind this review article lies in evaluating recent developments in photocatalytic CO2 reduction employing SACs supported on carbon substrates. In conclusion, we highlight critical issues associated with SACs, potential prospects in photocatalytic CO2 reduction, and existing challenges. This review article is dedicated to providing a comprehensive and organized compilation of recent research findings on carbon support materials for SACs in photocatalytic CO2 reduction, with a specific focus on materials that are environmentally friendly, readily accessible, cost-effective, and exceptionally efficient. This work offers a critical assessment and serves as a systematic reference for the development of SACs supported on MOFs, COFs, g-C3N4, graphene, and CTFs support materials to enhance photocatalytic CO2 conversion.

Advancements in Microwave Absorption Motivated by Interdisciplinary Research

Microwave absorption materials (MAMs) are originally developed for military purposes, but have since evolved into versatile materials with promising applications in modern technologies, including household use. Despite significant progress in bench-side research over the past decade, MAMs remain limited in their scope and have yet to be widely adopted. This review explores the history of MAMs from first-generation coatings to second-generation functional absorbers, identifies bottlenecks hindering their maturation. It also presents potential solutions such as exploring broader spatial scales, advanced characterization, introducing liquid media, utilizing novel toolbox (machine learning, ML), and proximity of lab to end-user. Additionally, it meticulously presents compelling applications of MAMs in medicine, mechanics, energy, optics, and sensing, which go beyond absorption efficiency, along with their current development status and prospects. This interdisciplinary research direction differs from previous research which primarily focused on meeting traditional requirements (i.e., thin, lightweight, wide, and strong), and can be defined as the next generation of smart absorbers. Ultimately, the effective utilization of ubiquitous electromagnetic (EM) waves, aided by third-generation MAMs, should be better aligned with future expectations.

Modulating Charge Separation of Oxygen-Doped Boron Nitride with Isolated Co Atoms for Enhancing CO2 -to-CO Photoreduction

To alleviate the greenhouse effect and address the related energy crisis, solar-driven reduction of carbon dioxide (CO2 ) to value-added products is considered as a sustainable strategy. However, the insufficient separation and rapid recombination of photogenerated charge carriers during photocatalysis greatly limit their reduction efficiency and practical application potential. Here, isolated Cobalt (Co) atoms are successfully decorated into oxygen-doped boron nitride (BN) via an in situ pyrolysis method, achieving greatly improved catalytic activity and selectivity to the carbon monoxide (CO) product. X-ray absorption fine spectroscopy demonstrates that the isolated Co atoms are stabilized by the O and N atoms with an unsaturated CoO2 N1 configuration. Further experimental investigation and theoretical simulations confirm that the decorated Co atoms not only work as the real active center during the CO2 reduction process, but also perform as the electron pump to promote the electron/hole separation and transfer, resulting in greatly accelerated reaction kinetics and improved activity. In addition, the CoO2 N1 coordination geometry is favorable to the conversion from *CO2 to *COOH, which shall be considered as a selectivity-determining step for the evolution of the CO products. The surface modulation strategy at the atomic level opens a new avenue for regulating the reaction kinetics for photocatalytic CO2 reduction.

The function of doping nitrogen on removing fluoride with decomposing La-MOF-NH2: Density functional theory calculation and experiments

Fluoride is an important pollutant in wastewater, and adsorption is an effective way to remove fluoride. Because nitrogen plays an important role in adsorbent materials, computational models were developed to understand the changes in work function resulting from nitrogen doping. La-N-C-800°C, was prepared by pyrolyzing La-MOF-NH2 to verify the influence on the performance of removing fluoride by electrosorption. Material and electrochemical performance tests were performed to characterize La-N-C-800°C. Adsorption kinetics, adsorption thermodynamics, initial concentrations, pH, and ions competition were investigated using La-N-C-800°C for fluoride removal. In addition, density functional theory was applied to evaluate the function of nitrogen. When nitrogen atoms were added, the density of states, partial density of states, populations, and different orbits of charge were calculated to discover deep changes. Nitrogen strengthened the carbon structure and La2O3 structure to remove fluoride. In addition, nitrogen can also act as an adsorption site in the carbon structure. These results provide design ideas for improving the performance of adsorbent materials by doping elements.

Design of a Single-Atom In-N3 -S site to Modulate Exciton Behavior in Carbon Nitride for Enhanced Photocatalytic Performance

Rational tailoring of the local coordination environment of single atoms has demonstrated a significant impact on the electronic state and catalytic performance, but the development of catalysts beyond noble/transition metals is profoundly significant and highly desired. Herein, the main-group metal indium (In) single atom is immobilized on sulfur-doped porous carbon nitride nanosheets (In@CNS) in the form of three nitrogen atoms coordinated with one sulfur atom (In-N3 -S). Both theoretical calculations and advanced characterization investigations clearly elucidated that the single-atomic In-N3 -S structures on In@CNS are powerful in promoting the dissociation of excitons into more free carriers as well as the charge separation, synergistically elevating electron concentration by 2.19 times with respect to pristine CNS. Meanwhile, the loading of In single atoms on CNS is responsible for altering electronic structure and lowering the Gibbs free energy for hydrogen adsorption. Consequently, the optimized In@CNS-5.0 exhibited remarkable photocatalytic performance, remarkable water-splitting and tetracycline hydrochloride degradation. The H2 production achieved to 10.11 mmol h-1 g-1 with a notable apparent quantum yield of 19.70% at 400 nm and remained at 10.40% at 420 nm. These findings open a new perspective for in-depth comprehending the effect of the main-group metal single-atom coordination environment on promoting photocatalytic performance.

Asymmetric Cu-N-La Species Enabling Atomic-Level Donor-Acceptor Structure and Favored Reaction Thermodynamics for Selective CO2 Photoreduction to CH4

Photocatalytic CO2 reduction into ideal hydrocarbon fuels, such as CH4 , is a sluggish kinetic process involving adsorption of multiple intermediates and multi-electron steps. Achieving high CH4 activity and selectivity therefore remains a great challenge, which largely depends on the efficiency of photogenerated charge separation and transfer as well as the intermediate energy levels in CO2 reduction. Herein, we construct La and Cu dual-atom anchored carbon nitride (LaCu/CN), with La-N4 and Cu-N3 coordination bonds connected by Cu-N-La bridges. The asymmetric Cu-N-La species enables the establishment of an atomic-level donor-acceptor structure, which allows the migration of electrons from La atoms to the reactive Cu atom sites. Simultaneously, intermediates during CO2 reduction on LaCu/CN demonstrate thermodynamically more favorable process for CH4 formation based on theoretical calculations. Eventually, LaCu/CN exhibits a high selectivity (91.6 %) for CH4 formation with a yield of 125.8 μmol g-1 , over ten times of that for pristine CN. This work presents a strategy for designing multi-functional dual-atom based photocatalysts.

Heterophase junction engineering: Enhanced photo-thermal synergistic catalytic performance of CO2 reduction over 1T/2H-MoS2

Photocatalytic CO2 reduction technology has been proposed as a promising solution to the greenhouse effect and energy crisis. However, the lower quantum efficiency limits its practical applications. Here, we have significantly improved the photocatalytic CO2 reduction performance of MoS2 by coupling the heterophase junction (1T/2H-MoS2) construction and photo-thermal synergy strategies. At 200 °C and 42 mW·cm-2 of 420 nm LED irradiation, the CO production rate of 1T/2H-MoS2 reached 35.3 μmol·g-1·h-1, which was 3.5 and 2.8 times that of 1T-MoS2 and 2H-MoS2, respectively. In addition, only faint CO was detected under sole photo- or sole thermal catalysis conditions. Mechanism studies showed that COOH* was the key intermediate in the photo-thermal synergistic catalytic CO2 reduction over 1T/2H-MoS2. The heterophase junction engineering significantly facilitated the separation of photogenerated carriers, and the introduction of heat accelerated the charge migration and surface reaction rates. Our work provides innovative insights into the catalyst design and mechanism studies for photo-thermal synergistic catalytic CO2 reduction.

K-N Bridge-Mediated charge separation in hollow g-C3N4 Frameworks: A bifunctional photocatalysts towards efficient H2 and H2O2 production

The development of bifunctional photocatalysts for enhancing hydrogen (H2) and hydrogen peroxide (H2O2) production from water is essential in addressing environmental and energy issues. However, the practical implementation of photocatalytic technology is still constrained by the inadequate separation of photo-generated charge carriers. Herein, potassium (K) atoms are introduced into the interlayers of graphitic carbon nitride (g-C3N4) with a hollow hexagonal structure (K-TCN) and are coordinated with N atoms in adjacent layers. The presence of K-N coordination serves as a layer bridge, facilitating the separation of charge carriers. The hollow hexagonal structure reduces the distance over which photogenerated electrons migrate to the surface, thereby enhancing the reaction kinetics. Consequently, the optimized K-TCN exhibits a dramatically improved photocatalytic H2 (941.6 μmol g-1h-1 with platinum (Pt) as the cocatalyst) and H2O2 (347.6 μmol g-1h-1) generation as compared to hollow g-C3N4 (TCN) and bulk g-C3N4 nanosheet (CN) without K-N bridge under visible light irradiation. The unique design holds promising potential for developing highly efficient bifunctional photocatalysts towards producing renewable fuels and value-added chemicals.

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO2 reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni-N4 and Fe-N4 pair sites is designed for boosting gas-solid CO2 reduction with H2 O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)-N-C DSAC exhibits a superior photothermal catalytic performance for CO2 reduction to CO (86.16 μmol g-1  h-1 ), CH4 (135.35 μmol g-1  h-1 ) and CH3 OH (59.81 μmol g-1  h-1 ), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe-N-C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)-N-C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni-N-N-Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO3 dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO3 pathways) for solar-driven photothermal CO2 reduction to initial CO production.

Dynamic Regulation Achieving High-Performance La-Containing Prussian Blue Analogues for Aqueous K+ Storage

Lanthanum (La), an "industrial aginomoto" element, exhibits that a small amount of introduction would greatly improve performance. However, La-containing Prussian blue analogues (PBAs) would be dissolved into aqueous solutions, which cannot act as a potassium-ion (K+) storage host. Here, an effective dynamic regulating strategy (chemical components and structures) is developed to overcome the high solubility of La-containing PBA in aqueous electrolytes and achieve high structural stability and superior aqueous K+ storage. For chemical component regulation, Fe3+ ions in the electrolyte fill the La3+ vacancies on the surface and the modified surface hinders the La atoms from further dissolving, and the remaining La atoms in bulk phase improve electron/ion transfer ability and amount of K+ storage. For the structure regulation, the material is transferred from the hexagon to the cubic lattice during charging-discharging procedures, achieving a highly thermodynamically optimal structure. The cathode presents ultrahigh capacities of 171, 155, 132, and 116 at current densities of 1, 2, 3, and 4 A g-1 respectively, and the capacity remains almost constant after 1000 cycles. The mechanism is revealed by experiments and density functional theory (DFT).

Photocatalysis with atomically thin sheets

Atomically thin sheets (e.g., graphene and monolayer molybdenum disulfide) are ideal optical and reaction platforms. They provide opportunities for deciphering some important and often elusive photocatalytic phenomena related to electronic band structures and photo-charges. In parallel, in such thin sheets, fine tuning of photocatalytic properties can be achieved. These include atomic-level regulation of electronic band structures and atomic-level steering of charge separation and transfer. Herein, we review the physics and chemistry of electronic band structures and photo-charges, as well as their state-of-the-art characterization techniques, before delving into their atomic-level deciphering and mastery on the platform of atomically thin sheets.

Progress on Single-Atom Photocatalysts for H2 Generation: Material Design, Catalytic Mechanism, and Perspectives

Solar energy utilization is of great significance to current challenges of the energy crisis and environmental pollution, which benefit the development of the global community to achieve carbon neutrality goals. Hydrogen energy is also treated as a good candidate for future energy supply since its combustion not only supplies high-density energy but also shows no pollution gas. In particular, photocatalytic water splitting has attracted increasing research as a promising method for H2 production. Recently, single-atom (SA) photocatalysts have been proposed as a potential solution to improve catalytic efficiency and lower the costs of photocatalytic water splitting for H2 generation. Owing to the maximized atom utilization rate, abundant surface active sites, and tunable coordination environment, SA photocatalysts have achieved significant progress. This review reviews developments of advanced SA photocatalysts for H2 generation regarding the different support materials. The recent progress of titanium dioxide, metal-organic frameworks, two-dimensional carbon materials, and red phosphorus supported SA photocatalysts are carefully discussed. In particular, the material designs, reaction mechanisms, modulation strategies, and perspectives are highlighted for realizing improved solar-to-energy efficiency and H2 generation rate. This work will supply significant references for future design and synthesis of advanced SA photocatalysts.

Recent Advances on Single-Atom Catalysts for Photocatalytic CO2 Reduction

The present energy crisis and environmental challenges may be efficiently resolved by converting carbon dioxide (CO2 ) into various useful carbon products. The development of more effective catalysts has been the main focus of current research on photocatalytic CO2 reduction. Due to their high atomic efficiency and superior catalytic activity, single-atom catalysts (SACs) have attracted considerable interest in catalytic CO2 conversion. This review discusses the current research developments, obstacles, and potential of SACs for photocatalytic CO2 reduction. And further, discusses the principle of photocatalytic carbon dioxide reduction. This work has compared and analyzed the effects of support materials and active site types in SACs on photocatalytic CO2 reduction performance. This work believes that by sharing these developments, some inspiration for the rational design and development of stable and effective photocatalytic CO2 reduction catalysts based on SACs can be provided.

Metal to non-metal sites of metallic sulfides switching products from CO to CH4 for photocatalytic CO2 reduction

The active center for the adsorption and activation of carbon dioxide plays a vital role in the conversion and product selectivity of photocatalytic CO2 reduction. Here, we find multiple metal sulfides CuInSnS4 octahedral nanocrystal with exposed (1 1 1) plane for the selectively photocatalytic CO2 reduction to methane. Still, the product is switched to carbon monoxide on the corresponding individual metal sulfides In2S3, SnS2, and Cu2S. Unlike the common metal or defects as active sites, the non-metal sulfur atom in CuInSnS4 is revealed to be the adsorption center for responding to the selectivity of CH4 products. The carbon atom of CO2 adsorbed on the electron-poor sulfur atom of CuInSnS4 is favorable for stabilizing the intermediates and thus promotes the conversion of CO2 to CH4. Both the activity and selectivity of CH4 products over the pristine CuInSnS4 nanocrystal can be further improved by the modification of with various co-catalysts to enhance the separation of the photogenerated charge carrier. This work provides a non-metal active site to determine the conversion and selectivity of photocatalytic CO2 reduction.

DFT Calculation of Carbon-Doped TiO2 Nanocomposites

Titanium dioxide (TiO2) has been proven to be an excellent material for mitigating the continuous impact of elevated carbon dioxide concentrations. Carbon doping has emerged as a promising strategy to enhance the CO2 reduction performance of TiO2. In this study, we investigated the effects of carbon doping on TiO2 using density functional theory (DFT) calculations. Two carbon doping concentrations were considered (4% and 6%), denoted as TiO2-2C and TiO2-3C, respectively. The results showed that after carbon doping, the band gaps of TiO2-2C and TiO2-3C were reduced to 1.58 eV and 1.47 eV, respectively, which is lower than the band gap of pure TiO2 (2.13 eV). This indicates an effective improvement in the electronic structure of TiO2. Barrier energy calculations revealed that compared to pure TiO2 (0.65 eV), TiO2-2C (0.54 eV) and TiO2-3C (0.59 eV) exhibited lower energy barriers, facilitating the transition to *COOH intermediates. These findings provide valuable insights into the electronic structure changes induced by carbon doping in TiO2, which can contribute to the development of sustainable energy and environmental conservation measures to address global climate challenges.

Photosynthesis of Hydrogen Peroxide Based on g-C3 N4 : The Road of a Cost-Effective Clean Fuel Production

Emerging artificial photosynthesis promises to offer a competitive means for solar energy conversion and further solves the energy crisis facing the world. Hydrogen peroxide (H2 O2 ), which is considered as a benign oxidant and a prospective liquid fuel, has received worldwide attention in the field of artificial photosynthesis on account of the source materials are just oxygen, water, and sunlight. Graphitic carbon nitride (g-C3 N4 )-based photocatalysts for H2 O2 generation have attracted extensive research interest due to the intrinsic properties of g-C3 N4 . In this review, research processes for H2 O2 generation on the basis of g-C3 N4 , including development, fabrication, merits, and disadvantages, and the state-of-the-art methods to enhance the performance are summarized after a brief introduction and the mechanism analysis of an efficient catalytic system. Also, recent applications of g-C3 N4 -based photocatalysts for H2 O2 production are reviewed, and the significance of active sites and synthetic pathways are highlighted from the view of reducing barriers. Finally, this paper ends with some concluding remarks to reveal the issues and opportunities of g-C3 N4 -based photocatalysts for producing H2 O2 in a high yield.

Recent Advances of Constructing Metal/Semiconductor Catalysts Designing for Photocatalytic CO2 Hydrogenation

With the development of the world economy and the rapid advancement of global industrialization, the demand for energy continues to grow. The significant consumption of fossil fuels, such as oil, coal, and natural gas, has led to excessive carbon dioxide emissions, causing global ecological problems. CO2 hydrogenation technology can convert CO2 into high-value chemicals and is considered one of the potential ways to solve the problem of CO2 emissions. Metal/semiconductor catalysts have shown good activity in carbon dioxide hydrogenation reactions and have attracted widespread attention. Therefore, we summarize the recent research on metal/semiconductor catalysts for photocatalytic CO2 hydrogenation from the design of catalysts to the structure of active sites and mechanistic investigations, and the internal mechanism of the enhanced activity is elaborated to give guidance for the design of highly active catalysts. Finally, based on a good understanding of the above issues, this review looks forward to the development of future CO2 hydrogenation catalysts.

Progress in photocatalytic CO2 reduction based on single-atom catalysts

Reduced CO₂ emissions, conversion, and reuse are critical steps toward carbon peaking and carbon neutrality. Converting CO₂ into high-value carbon-containing compounds or fuels may effectively address the energy shortage and environmental issues, which is consistent with the notion of sustainable development. Photocatalytic CO₂ reduction processes have become one of the research focuses, where single-atom catalysts have demonstrated significant benefits owing to their excellent percentage of atom utilization. However, among the crucial challenges confronting contemporary research is the production of efficient, low-cost, and durable photocatalysts. In this paper, we offer a comprehensive overview of the study growth on single-atom catalysts for photocatalytic CO₂ reduction reactions, describe several techniques for preparing single-atom catalysts, and discuss the advantages and disadvantages of single-atom catalysts and present the study findings of three single-atom photocatalysts with TiO₂, g-C₃N₄ and MOFs materials as carriers based on the interaction between single atoms and carriers, and finally provide an outlook on the innovation of photocatalytic CO₂ reduction reactions.

Embedding oxophilic rare-earth single atom in platinum nanoclusters for efficient hydrogen electro-oxidation

Designing Pt-based electrocatalysts with high catalytic activity and CO tolerance is challenging but extremely desirable for alkaline hydrogen oxidation reaction. Herein we report the design of a series of single-atom lanthanide (La, Ce, Pr, Nd, and Lu)-embedded ultrasmall Pt nanoclusters for efficient alkaline hydrogen electro-oxidation catalysis based on vapor filling and spatially confined reduction/growth of metal species. Mechanism studies reveal that oxophilic single-atom lanthanide species in Pt nanoclusters can serve as the Lewis acid site for selective OH^- adsorption and regulate the binding strength of intermediates on Pt sites, which promotes the kinetics of hydrogen oxidation and CO oxidation by accelerating the combination of OH^- and *H/*CO in kinetics and thermodynamics, endowing the electrocatalyst with up to 14.3-times higher mass activity than commercial Pt/C and enhanced CO tolerance. This work may shed light on the design of metal nanocluster-based electrocatalysts for energy conversion.

Recent Progress of Single-Atom Photocatalysts Applied in Energy Conversion and Environmental Protection

Photocatalysis driven by solar energy is a feasible strategy to alleviate energy crises and environmental problems. In recent years, significant progress has been made in developing advanced photocatalysts for efficient solar-to-chemical energy conversion. Single-atom catalysts have the advantages of highly dispersed active sites, maximum atomic utilization, unique coordination environment, and electronic structure, which have become a research hotspot in heterogeneous photocatalysis. This paper introduces the potential supports, preparation, and characterization methods of single-atom photocatalysts in detail. Subsequently, the fascinating effects of single-atom photocatalysts on three critical steps of photocatalysis (the absorption of incident light to produce electron-hole pairs, carrier separation and migration, and interface reactions) are analyzed. At the same time, the applications of single-atom photocatalysts in energy conversion and environmental protection (CO₂ reduction, water splitting, N₂ fixation, organic macromolecule reforming, air pollutant removal, and water pollutant degradation) are systematically summarized. Finally, the opportunities and challenges of single-atom catalysts in heterogeneous photocatalysis are discussed. It is hoped that this work can provide insights into the design, synthesis, and application of single-atom photocatalysts and promote the development of high-performance photocatalytic systems.

Engineering Single Cu Sites into Covalent Organic Framework for Selective Photocatalytic CO2 Reduction

Photocatalytic CO₂ conversion into value-added chemicals is a promising route but remains challenging due to poor product selectivity. Covalent organic frameworks (COFs) as an emerging class of porous materials are considered as promising candidates for photocatalysis. Incorporating metallic sites into COF is a successful strategy to realize high photocatalytic activities. Herein, 2,2'-bipyridine-based COF bearing non-noble single Cu sites is fabricated by chelating coordination of dipyridyl units for photocatalytic CO₂ reduction. The coordinated single Cu sites not only significantly enhance light harvesting and accelerate electron-hole separation but also provide adsorption and activation sites for CO₂ molecules. As a proof of concept, the Cu-Bpy-COF as a representative catalyst exhibits superior photocatalytic activity for reducing CO₂ to CO and CH₄ without photosensitizer, and impressively, the product selectivity of CO and CH₄ can be readily modulated only by changing reaction media. Experimental and theoretical results reveal the crucial role of single Cu sites in promoting photoinduced charge separation and solvent effect in regulating product selectivity, which provides an important sight onto the design of COF photocatalysts for selective CO₂ photoreduction.

Isolation of Highly Reactive Cobalt Phthalocyanine via Electrochemical Activation for Enhanced CO2 Reduction Reaction

Electrochemical CO₂ -to-CO conversion offers an attractive and efficient route to recycle CO₂ greenhouse gas. Molecular catalysts, like CoPc, are proved to be possible replacement for precious metal-based catalysts. These molecules, a combination of metal center and organic ligand molecule, may evolve into single atom structure for enhanced performance; besides, the manipulation of molecules' behavior also plays an important role in mechanism research. Here, in this work, the structure evolution of CoPc molecules is investigated via electrochemical-induced activation process. After numbers of cyclic voltammetry scanning, CoPc molecular crystals become cracked and crumbled, meanwhile the released CoPc molecules migrate to the conductive substrate. Atomic-scale HAADF-STEM proves the migration of CoPc molecules, which is the main reason for the enhancement in CO₂ -to-CO performance. The as-activated CoPc exhibits a maximum FE_CO of 99% in an H-type cell and affords a long-term durability at 100 mA cm^-2 for 29.3 h in a membrane electrode assembly reactor. Density-functional theory (DFT) calculation also demonstrates a favorable CO₂ activation energy with such an activated CoPc structure. This work provides a different perspective for understanding molecular catalysts as well as a reliable and universal method for practical utilization.

Stable photodegradation of antibiotics by the functionalized 3D-Bi2MoO6@MoO3/PU composite sponge: High efficiency pathways, optical properties and Z-scheme heterojunction mechanism

The designation and fabrication of heterogeneous photocatalyst with superior redox capability is an important technique for emerging pollutants treatment. In this study, we designed the Z-scheme heterojunction of stable 3D-Bi₂MoO₆@MoO₃/PU, which could not only accelerate the migration and separation in photogenerated carriers, but also stabilize the separation rate of photo-generation carriers. In the Bi₂MoO₆@MoO₃/PU photocatalytic system, 88.89% of oxytetracycline (OTC, 10 mg L^-1) and 78.25%-84.59% of multiple antibiotics (SDZ, NOR, AMX and CFX, 10 mg L^-1) could be decomposed within 20 min under the optimized reaction condition, revealing the superior performance and potential application value. Specifically, the morphology, chemical structure and optical properties detection of Bi₂MoO₆@MoO₃/PU greatly affected the direct Z-scheme electron transferring mode in the p-n type heterojunction. Besides, the ·OH, h⁺, ·O₂^- dominated the photoactivation process through ring-opening, dihydroxylation, deamination, decarbonization and demethylation in OTC decomposition. Expectantly, the stability and universality of Bi₂MoO₆@MoO₃/PU composite photocatalyst would further broaden the practical application and demonstrated that the potential of photocatalytic technique in antibiotics pollutants for wastewater remediation.

Photocatalytic CO2 reduction using La-Ni bimetallic sites within a covalent organic framework

The precise construction of photocatalysts with diatomic sites that simultaneously foster light absorption and catalytic activity is a formidable challenge, as both processes follow distinct pathways. Herein, an electrostatically driven self-assembly approach is used, where phenanthroline is used to synthesize bifunctional LaNi sites within covalent organic framework. The La and Ni site acts as optically and catalytically active center for photocarriers generation and highly selective CO₂-to-CO reduction, respectively. Theory calculations and in-situ characterization reveal the directional charge transfer between La-Ni double-atomic sites, leading to decreased reaction energy barriers of *COOH intermediate and enhanced CO₂-to-CO conversion. As a result, without any additional photosensitizers, a 15.2 times enhancement of the CO₂ reduction rate (605.8 μmol·g^-1·h^-1) over that of a benchmark covalent organic framework colloid (39.9 μmol·g^-1·h^-1) and improved CO selectivity (98.2%) are achieved. This work presents a potential strategy for integrating optically and catalytically active centers to enhance photocatalytic CO₂ reduction.

Ligand-Assistant Iced Photocatalytic Reduction to Synthesize Atomically Dispersed Cu Implanted Metal-Organic Frameworks for Photo-Enhanced Uranium Extraction from Seawater

Uranium extraction from natural seawater is one of the most promising routes to address the shortage of uranium resources. By combination of ligand complexation and photocatalytic reduction, porous framework-based photocatalysts have been widely applied to uranium enrichment. However, their practical applicability is limited by poor photocatalytic activity and low adsorption capacity. Herein, atomically dispersed Cu implanted UiO-66-NH₂ (Cu SA@UiO-66-NH₂ ) photocatalysts are prepared via ligand-assistant iced photocatalytic reduction route. N-Cu-N moiety acts as an effective electron acceptor to potentially facilitate charge transfer kinetics. By contrast, there exist Cu sub-nanometer clusters by the typical liquid phase photoreduction, resulting in a relatively low photocatalytic activity. Cu SA@UiO-66-NH₂ adsorbents exhibit superior antibacterial ability and improved photoreduction conversion of the adsorbed U(VI) to insoluble U(IV), leading to a high uranium sorption capacity of 9.16 mg-U/g-Ads from natural seawater. This study provides new insight for enhancing uranium uptake by designing SA-mediated MOF photocatalysts.

Engineering Z-Scheme FeOOH/PCN with Fast Photoelectron Transfer and Surface Redox Kinetics for Efficient Solar-Driven CO2 Reduction

Solar-driven conversion of carbon dioxide (CO₂) without sacrificial agents offers an attractive alternative in sustainable energy research; nevertheless, it is often retarded by the sluggish water oxidation kinetics and severe charge recombination. To this end, a Z-scheme iron oxyhydroxide/polymeric carbon nitride (FeOOH/PCN) heterojunction, as identified by quasi in situ X-ray photoelectron spectroscopy, is constructed. In this heterostructure, the two-dimensional FeOOH nanorod provides rich coordinatively unsaturated sites and highly oxidative photoinduced holes to boost the sluggish water decomposition kinetics. Meanwhile, PCN acts as a robust agent for CO₂ reduction. Consequently, FeOOH/PCN achieves efficient CO₂ photoreduction with a superior selectivity of CH₄ (>85%), together with an apparent quantum efficiency of 2.4% at 420 nm that outperforms most two-step photosystems to date. This work offers an innovative strategy for the construction of photocatalytic systems toward solar fuel production.

Anchored Cu single atoms on porous g-C3N4 for superior photocatalytic H2 evolution from water splitting

One of the most promising strategies for producing hydrogen is photocatalytic water splitting, in which the photocatalyst is a key component. Among many semiconductor photocatalysts, g-C₃N₄ has attracted great attention due to its narrow band gap, excellent stability and low cost. However, practical application is limited by its poor intrinsic activity. In this work, a high-performance porous g-C₃N₄ (PCN) photocatalyst with anchored Cu single atoms (CuSAs) was synthesized by a one-step co-heating approach. The obtained Cu1.5-PCN displays an excellent hydrogen evolution rate (HER) of 2142.4 μmol h^-1 g^-1 under visible light (=420 nm), which is around 15 and 109 times higher than those of PCN and bulk g-C₃N₄, respectively. In addition, it also shows good stability during H₂ evolution. The results of experimental research and DFT simulations indicate that the single Cu ions formed bonds with the N-ring and these remain stable. Meanwhile, the special electronic structure of the Cu-N charge bridge extends the light absorption band to the visible-light region (380-700 nm). This high-performance and low-cost photocatalyst has great potential in solar energy conversion.

Selective production of singlet oxygen for harmful cyanobacteria inactivation and cyanotoxins degradation: Efficiency and mechanisms

Knowledge about the impact of singlet oxygen (¹O₂) on the characteristics and inactivation of harmful cyanobacterial organic matter is limited. In this study, the feasibility of using an improved single-iron doped graphite-like phase carbon nitride catalyst (FeCN) to activate peroxymonosulfate (PMS) catalytic production of ¹O₂ to inactivate four harmful cyanobacteria was investigated. The inactivation efficiencies at 30 min were 92.77%, 66.84%, 91.06%, and 93.45% for Microcystis aeruginosa (M. aeruginosa), Nodularia harveyana, Oscillatoria sp., and Nostoc sp., respectively. This was associated with adjusting experimental parameters, such as the FeCN and PMS doses and initial pH, to obtain the maximum ¹O₂ yield. The quenching experiment results and electron paramagnetic resonance spectra showed that ¹O₂ generated via the non-radical pathway might play a dominant role in inactivating harmful cyanobacteria and degrading harmful algal toxins (Microcystin-LR and Nodularin). In addition, the FeCN-PMS system not only effectively destroyed the integrity of harmful cyanobacterial cells but also effectively degraded cyanobacterial toxins, thereby preventing severe secondary contamination by cell rupture. A possible removal mechanism was proposed. This reveals the potential of ¹O₂ to simultaneously inactivate harmful cyanobacteria and degrade harmful cyanobacterial toxins.

Ultrasonic-assisted synthesis of porous S-doped carbon nitride ribbons for photocatalytic reduction of CO2

A series of porous S-doped carbon nitride ribbons (PSCN) were prepared by one-pot hydrothermal and sonochemical synthesis techniques. The morphologies and nanostructures of the catalysts were characterized by SEM, XRD and IR, which confirmed the pristine graphitic structures of carbon nitrides retained in the products. Due to sonication treatment, PSCN has porous structures in the thin ribbon and larger specific surface areas (PSCN 43.5 m²/g, SCN 26.6 m²/g and GCN 6.5 m²/g). XPS and elemental mappings verified that sulfur atoms were successfully introduced into the carbon nitride framework. Diffuse reflectance spectroscopy (DRS) results showed S-doping in the carbon nitride reduced the bandgap energy and enhanced their capability of the utilization of visible light, which contributed to higher photo-generated current. Photoluminescence (PL) analysis indicates the recombination of photogenerated carriers was suppressed in PSCN. Moreover, the photocatalytic performance showed that S-doping and porous and thin ribbon nanostructures may effectively boost the CO₂ reduction rate (to as much as 5.8 times of GCN) when illuminated byvisible light (>420 nm) without the need of sacrificial materials. The preliminary mechanisms of the formation of PSCN and its applications in photocatalytic CO₂ reduction are proposed. It highlights the potential of the current technique to produce effective, nonmetal-doped carbon nitride photocatalysts.

Strong Electronic Orbit Coupling between Cobalt and Single-Atom Praseodymium for Boosted Nitrous Oxide Decomposition on Co3O4 Catalyst

Nitrous oxide (N₂O) has gained increasing attention as an important noncarbon dioxide greenhouse gas, and catalytic decomposition is an effective method of reducing its emissions. Here, Co₃O₄ was synthesized by the sol-gel method and single-atom Pr was confined in its matrix to improve the N₂O decomposition performance. It was observed that the reaction rate varied in a volcano-like pattern with the amount of doped Pr. A N₂O decomposition reaction rate 5-7.5 times greater than that of pure Co₃O₄ is achieved on the catalyst with a Pr/Co molar ratio of 0.06:1, and further Pr doping reduced the activity due to PrO_x cluster formation. Combined with X-ray photoelectron spectroscopy, X-ray absorption fine structure, density functional theory and in situ near-ambient pressure X-ray photoelectron spectroscopy, it was demonstrated that the single-atom doped Pr in Co₃O₄ generates the "Pr 4f-O 2p-Co 3d" network, which redistributes the electrons in Co₃O₄ lattice and increases the t_2g electrons at the tetracoordinated Co²⁺ sites. This coupling between the Pr 4f orbit and Co²⁺ 3d orbit triggers the formation of a 4f-3d electronic ladder, which accelerates the electron transfer from Co²⁺ to the 3π* antibonding orbital of N₂O, thus contributing to the N-O bond cleavage. Moreover, the energy barrier for each elementary reaction in the decomposition process of N₂O is reduced, especially for O₂ desorption. Our work provides a theoretical grounding and reference for designing atomically modified catalysts for N₂O decomposition.

Optimizing the semiconductor–metal-single-atom interaction for photocatalytic reactivity

Metal single-atom (MSA) catalysts with 100% metal atom utilization and unique electronic properties are attractive cocatalysts for efficient photocatalysis when coupled with semiconductors. Owing to the absence of a metal-metal bond, MSA sites are exclusively coordinated with the semiconductor photocatalyst, featuring a chemical-bond-driven tunable interaction between the semiconductor and the metal single atom. This semiconductor-MSA interaction is a platform that can facilitate the separation/transfer of photogenerated charge carriers and promote the subsequent catalytic reactions. In this Review, we first introduce the fundamental physicochemistry related to the semiconductor-MSA interaction. We highlight the ligand effect on the electronic structures, catalytic properties and functional mechanisms of the MSA cocatalyst through the semiconductor-MSA interaction. Then, we categorize the state-of-the-art experimental and theoretical strategies for the construction of the efficient semiconductor-MSA interaction at the atomic scale for a wide range of photocatalytic reactions. The examples described include photocatalytic water splitting, CO₂ reduction and organic synthesis. We end by outlining strategies on how to further advance the semiconductor-MSA interaction for complex photocatalytic reactions involving multiple elementary steps. We provide atomic and electronic-scale insights into the working mechanisms of the semiconductor-MSA interaction and guidance for the design of high-performance semiconductor-MSA interface photocatalytic systems.

Effect of Light and Heavy Rare Earth Doping on the Physical Structure of Bi2O2CO3 and Their Performance in Photocatalytic Degradation of Dimethyl Phthalate

In order to solve the problem of environmental health hazards caused by phthalate esters, a series of pure Bi2O2CO3 and light (La, Ce, Pr, Nd, Sm and Eu) and heavy (Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) rare earth-doped Bi2O2CO3 samples were prepared by hydrothermal method. The crystalline phase composition and physical structure of the samples calcined at 300 °C were studied, and we found that the rare earth ion doping promoted the transformation of Bi2O2CO3 to β-Bi2O3 crystalline phase, thus obtaining a mixed crystal phase photocatalyst constituted by rare earth-ion-doped Bi2O2CO3/β-Bi2O3. The Bi2O3/Bi2O2CO3 heterostructure had a lower band gap and more efficient charge transfer. The fabricated samples were applied to the photocatalytic degradation of dimethyl phthalate (DMP) under a 300 W tungsten lamp, and it was found that the rare earth ion doping enhanced the photocatalytic degradation activity of DMP, in which the heavy rare earth of Er-doped sample reached 78% degradation for DMP at 150 min of light illumination. In addition, the doping of rare earths resulted in a larger specific surface area and a stronger absorption of visible light. At the same time, the formation of Bi2O2CO3/β-Bi2O3 heterogeneous junction enhanced the separation efficiency of photogenerated electrons and holes.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation

Photoreduction of CO₂ into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu₁ N₃ @PCN and Cu₁ P₃ @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO₂ reduction by H₂ O without sacrificial agents. Cu₁ N₃ @PCN was exclusively active for CO production with a rate of 49.8 μmol_CO  g_cat ^-1  h^-1 , outperforming most polymeric carbon nitride (C₃ N₄ ) based catalysts, while Cu₁ P₃ @PCN preferably yielded H₂ . Experimental and theoretical analysis suggested that doping P in C₃ N₄ by replacing a corner C atom upshifted the d-band center of Cu in Cu₁ N₃ @PCN close to the Fermi level, which boosted the adsorption and activation of CO₂ on Cu₁ N₃ , making Cu₁ N₃ @PCN efficiently convert CO₂ to CO. In contrast, Cu₁ P₃ @PCN with a much lower Cu 3d electron energy exhibited negligible CO₂ adsorption, thereby preferring H₂ formation via photocatalytic H₂ O splitting.

Direct Z-scheme mediated SmVO4/UiO-66-NH2 heterojunction nanocomposite for the degradation of antibiotic tetracycline hydrochloride molecules under sunlight

The use of tetracycline hydrochloride (TCH) for veterinary, human therapy, and agriculture has risen in the past few decades, making it to become one of the most exploited antibiotics. However, TCH residue in the environment is causing issues related to the evolution of antibiotic-resistant bacteria. To address such a problem, photodegradation offers a potential solution to decompose these pollutants in wastewater and thereby mitigates negative environmental impacts. In this context, the research focuses on the use of the rare-earth metal oxide samarium orthovanadate (SmVO₄) with nanorod structure, coupled with UiO-66-NH₂ for the photocatalytic degradation. Their photocatalytic activity to degrade antibiotic TCH molecules is explored under simulated solar light irradiation. The integration of UiO-66-NH₂ with SmVO₄ enhanced the light absorption, recombination resistance, carrier lifetime (from 0.382 to 0.411 ns) and specific surface area (from 67.17 to 246 m²/g) of the composite system as confirmed from multiple analyses. The obtained results further indicated that SmVO₄/UiO-66-NH₂ nanocomposites could form a direct Z-scheme based heterojunction. Such mechanism of charge transfer leads to the effective degradation of TCH molecules up to 50% in 90 min under solar light, while it is degraded only 30% in the case of bare-SmVO₄ nanorods. In this work, the incorporation of UiO-66-NH₂ positively influences photoelectrochemical properties and improves the overall photoredox properties of SmVO₄ for the degradation of complex compounds like antibiotic TCH molecules. Therefore, UiO-66-NH₂ can be proposed as an effective material to sensitize the rare-earth based photocatalytic material.