Real-Time Monitoring of Hierarchical Self-Assembly and Induction of Circularly Polarized Luminescence from Achiral Luminogens

Fluorescence-Selective Absorption and Circularly Polarized Fluorescence Energy Transfer Assist the Generation of Multicolor Circularly Polarized Luminescence in Chiral Helical Polyacetylene-Based Janus Nanofibers

Chiroptical nanomaterials with circularly polarized luminescence (CPL) performance have aroused increasing attention. Herein, multicolor CPL-active Janus nanofibers are prepared through a simple parallel electrospinning method using chiral helical polyacetylenes as the chiral source and achiral fluorophores as the fluorescent source. Interestingly, despite a direct spatial isolation between the chiral component and the fluorescent component, blue and green CPL emissions can still be obtained due to the fluorescence-selective absorption behavior of chiral helical polyacetylenes, with a satisfactory dissymmetric factor (glum) of 2 × 10-2 and 2.5 × 10-3, respectively. Moreover, by taking advantage of the circular polarization fluorescence energy transfer process, red CPL emission is further achieved using the obtained blue and green CPL as energy donors and the achiral red fluorophore as an energy acceptor. The present work offers a facile approach to prepare multilevel-structured chiroptical materials with promising application potentials in a flexible photoelectric device.

Chiral Luminophore Guided Self-Assembly of Achiral Block Copolymers for the Amplification of Circularly Polarized Luminescence

This work aims to examine the effect of self-assembly on the chiroptic responses of the achiral block copolymer (BCP) polystyrene-b-poly(ethylene oxide) (PS-b-PEO) associated with chiral luminophores, (R)- or (S)-1,1'-bi-2-naphthol ((R)- or (S)-BINOL), through hydrogen bonding. With the formation of a well-ordered helical phase (H*), significantly induced circular dichroism (ICD) signals for the PEO block in the mixture can be found. Most interestingly, a remarkable amplification with an extremely large dissymmetry factor of luminescence (glum) from 10-3 to 0.3 (i.e., induced circular polarized luminescence (iCPL) behavior) for the chiral BINOLs in the mixture can be achieved by the formation of the helical phase (H*) via mesochiral self-assembly. As a result, by taking advantage of BCP for mesochiral self-assembly, it is feasible to create a nanostructured monolith with substantial optical activities, offering promising applications in the design of chiroptic devices.

Amplified Circularly Polarized Luminescence Behavior in Chiral Co-assembled Liquid Crystal Polymer Films via the Strategic Manipulation of Chiral Inducers

One of the most important factors for the future application of circularly polarized luminescence (CPL) materials is their high dissymmetry factors (gem), and more and more studies are working tirelessly to focus on increasing the gem value. Herein, we chose an achiral liquid crystal polymer (LC-P) and two chiral binaphthyl-based inducers (R/S-3 and R/S-6) with different substitution positions (3,3' positions for R/S-3 and 6,6' positions for R/S-6) to construct chiral co-assemblies and explored their induced amplification CPL behaviors. Interestingly, after the thermal annealing treatment, this kind of chiral co-assembly (R/S-3)0.05-(LC-P)0.95 can emit a superior CPL signal (|gem| = 0.31 and λem = 424 nm), which achieves about 13-fold signal amplification in the spin-coated film, compared to (R/S-6)0.1-(LC-P)0.9 (|gem| = 0.023 and λem = 424 nm). This is because (R/S-3)0.05-(LC-P)0.95 could further co-assemble to form a more ordered arrangement LC state and generate regular helix nanofibers than that of (R/S-6)0.1-(LC-P)0.9. This work provides an efficient method for synthesizing high-quality CPL-active materials through the strategic manipulation of the structure of chiral binaphthyl-based inducers in chiral co-assembled LCP systems.

Manipulating Chiroptical Activities in 0D Chiral Hybrid Manganese Bromides by Solvent Molecular Engineering

0D hybrid metal halides (0D HMHs) with fully isolated inorganic units provide an ideal platform for studying the correlations between chiroptical activities and crystal structures at atomic levels. Here, through the incorporation of different solvent molecules, a series of 0D chiral manganese bromides (RR/SS-C20H28N2)3MnBr8·2X (X = C2H5OH, CH3OH, or H2O) are synthesized to elucidate their chiroptical properties. They show negligible circular dichroism signals of Mn absorptions due to C2v-symmetric [MnBr4]2- tetrahedra. However, they display distinct circularly polarized luminescence (CPL) signals with continuously increased luminescence asymmetry factors (glum) from 10-4 (X = C2H5OH) to 10-3 (X = H2O). The increased glum value is structurally revealed to originate from the enhancement of [MnBr4]2- tetrahedral bond-angle distortions, due to the presence of different solvent molecules. Furthermore, (RR/SS-C20H28N2)MnBr4·H2O enantiomers with larger bond-angle distortions of [MnBr4]2- tetrahedra are synthesized based on hydrobromic acid-induced structural transformation of (RR/SS-C20H28N2)3MnBr8·2H2O enantiomers. Therefore, such (RR/SS-C20H28N2)MnBr4·H2O enantiomers exhibit enhanced CPL signals with |glum| up to 1.23 × 10-2. This work provides unique insight into enhancing chiroptical activities in 0D HMH systems.

BINOL-Based Chiral Macrocycles and Cages

Chirality, a fundamental principle in chemistry, biology, and medicine, is prevalent in nature and in organisms. Chiral molecules, such as DNA, RNA, and proteins, are crucial in biomolecular synthesis, as well as in the development of functional materials. Among these, 1,1'-binaphthyl-2,2'-diol (BINOL) stands out for its stable chiral configuration, versatile functionality, and commercial availability. BINOL is widely employed in asymmetric catalysis and chiral materials. This review mainly focuses on recent research over the past five years concerning the use of BINOL derivatives for constructing chiral macrocycles and cages. Their contributions to chiral luminescence, enantiomeric separation, transmembrane transport, and asymmetric catalysis were examined.

Nanoparticle Assembly: From Self-Organization to Controlled Micropatterning for Enhanced Functionalities

Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

Vesicles, fibres, films and crystals: A low-molecular-weight-gelator [Au(6-thioguanosine)2]Cl which exhibits a co-operative anion-induced transition from vesicles to a fibrous metallo-hydrogel

We describe a simple coordination compound of Au(I) and 6-thioguanosine, [Au(6-tGH)2]Cl, that has a rich self-assembly chemistry. In aqueous solution, the discrete complex assembles into a supramolecular fibre and forms a luminescent hydrogel at concentrations above about 1 mM. Below this concentration, the macromolecular structure is a vesicle. Through appropriate control of the solvent polarity, the gel can be turned into a lamellar film or crystallised. The molecular structure of [Au(6-tGH)2]Cl was determined using single crystal X-ray diffraction, which showed bis-6-thioguanosine linearly coordinated through the thione moiety to a central Au(I) ion. In the vesicles, the photoluminescence spectrum shows a broad, weak band at 550 nm owing to aurophilic interactions. Co-operative self-assembly from vesicle to fibre is made possible through halogen hydrogen bonding interactions and the aurophilic interactions are lost, resulting in a strong photoluminescence band at 490 nm with vibronic structure typical of an intraligand transition. The vesicle-fibre transition is also revealed by a large increase of ellipticity in the circular dichroism spectrum with a prominent peak near 390 nm owing to the helical structure of the fibres. Atomic force microscopy shows that at the same time as fibres form, the sample gels. Imaging near the vesicle-fibre transition shows that the fibres form between vesicles and a mechanism for the transition based on vesicle collisions is proposed.

Solvation-Mediated Self-Assembly from Crystals to Helices of Protic Acyclic Carbene AuI -Enantiomers with Chirality Amplification

Constructing chiral supramolecular assembly and exploring the underlying mechanism are of great significance in promoting the development of circularly polarized luminescence (CPL)-active materials. Herein, we report a solvation-mediated self-assembly from single-crystals to helical nanofibers based on the first protic acyclic (methoxy)(amino)carbenes (pAMACs) AuI -enantiomers driven by a synergetic aurophilic interactions and H-bonds. Their aggregation-dependent thermally activated delayed fluorescence properties with high quantum yields (ΦFL ) up to 95 % were proved to be attributed to packing modes of Au⋅⋅⋅Au dimers with π-stacking or one-dimensional extended Au⋅⋅⋅Au chains. Via drop-casting method, supramolecular P- or M-helices were prepared. Detailed studies on the helices demonstrate that formations of extended helical Au⋅⋅⋅Au molecular chains amplify supramolecular chirality, leading to strong CPL with high dissymmetry factor (|glum |=0.030, ΦFL =67 %) and high CPL brightness (BCPL ) of 4.87×10-3 . Our findings bring new insights into the fabrication of helical structures to improve CPL performance by modifying aurophilic interactions.

Enhancement of Circularly Polarized Luminescence from Pulsating Nanotubules

Enhancing the dissymmetry factor (glum ) is a crucial issue in developing circularly polarized luminescence (CPL) materials. Herein, based on supramolecular self-assembly of diethyl l-glutamate-cyanodiarylethene (L-GC) in mixed solution of EtOH-H2 O with different water fraction, enhanced circularly polarized emission from pulsating nanotubules is realized. In the mixture of ethanol and water (30/70, v/v), L-GC self-assembles into roll-up-type dense nanotubes and shows l-CPL. Remarkably, by increasing the water fraction to 80% and 90%, the diameter of the roll-up nanotubes increases and the dissymmetry factor of the nanotubes is significantly enhanced from 6.9 × 10-3  (dense nanotubes) to 3.7 × 10-2 (loose nanotubes) because of the enhanced intermolecular interactions and more ordered supramolecular stacking when increasing the water fraction. An efficient way is provided here to realize the increase of the dissymmetry factor by only changing the composition of solvents.

A New Strategy to Elevate Absorptivity of AIEgens for Intensified NIR-II Emission and Synergized Multimodality Therapy

High-efficiency absorptivity is crucial for the construction of high-performance luminescent materials, especially the long-wavelength near-infrared II (NIR-II) materials; thus seeking an efficient and universal strategy to elevate the absorptivity is extremely important but is still an intractable challenge. In this work, a simple but efficient design strategy is discovered, involving the introduction of gold(I) unit that could effectively elevate the absorptivity of aggregation-induced-emission luminogens (AIEgens). As a result of the efficient elevation of absorptivity, the representative AIE-active TBTP-Au shows more superior NIR-II (1220 nm) luminescence, much higher photothermal conversion efficiency, and unique intracellular reactive oxygen species (ROS) generating ability compared with that of the TBTP ligand. Taking advantage of these improvements, the fabricated tumor-targeting TBTP-Au-cRGD nanoparticles achieve specific NIR-II tumorous imaging in vivo and exert high-efficiency cancer therapy via the synergistic chemotherapy and photothermal therapy. Thus, this work provides a new and efficient strategy to construct high-absorption luminescent materials and demonstrates the great potential of gold(I)-based AIEgens as multifunctional theranostic agents.

Chiral Hydride Cu18 Clusters Transform to Superatomic Cu15Ag4 Clusters: Circularly Polarized Luminescence Lighting

The manipulation of metal cluster enantiomers and their reconstruction remain challenging. Here, for the first time, we report an enantiomeric pair of hydride copper clusters [Cu18H(R/S-PEA)12](BF4)5 (R/S-Cu18H) made using designed chiral ligands. By manipulation of R/S-Cu18H with Ag+ ions, H- ions are released, leading to the reconstruction of 15 Cu atoms. Moreover, 4 Ag atoms replaced Cu atoms at the specific sites, resulting in the formation of homochiral [Cu15Ag4(R/S-PEA)12](BF4)5 (R/S-Cu15Ag4) with an isomorphic metal skeleton. This process was accompanied by a reduction reaction generating two free valence elections in the chiral alloying counterparts, which displayed orange emission. The solid-state R/S-Cu15Ag4 exhibited a photoluminescence quantum yield of 7.02% and excellent circularly polarized luminescence. The chiral transformations were resolved by single-crystal X-ray diffraction. The development of chiral copper hydride precursor-based metal clusters with chiroptical activities holds tremendous promise for advancing the field of optoelectronics and enabling new applications in lighting, displays, and beyond.

Dual-Responsive Supramolecular Chiral Assemblies from Amphiphilic Dendronized Tetraphenylethylenes

Supramolecular assembly of amphiphilic molecules in aqueous solutions to form stimuli-responsive entities is attractive for developing intelligent supramolecular materials for bioapplications. Here we report on the supramolecular chiral assembly of amphiphilic dendronized tetraphenylethylenes (TPEs) in aqueous solutions. Hydrophobic TPE moieties were connected to the hydrophilic three-fold dendritic oligoethylene glycols (OEGs) through a tripeptide proline-hydroxyproline-glycol (POG) to afford the characteristic topological structural effects of dendritic OEGs and the peptide linker. Both ethoxyl- and methoxyl-terminated dendritic OEGs were used to modulate the overall hydrophilicity of the dendronized TPEs. Their supramolecular aggregates exhibited thermoresponsive behavior that originated from the dehydration and collapse of the dendritic OEGs, and their cloud point temperatures (Tcps) were tailored by solution pH conditions. Furthermore, aggregation-induced fluorescent emission (AIE) from TPE moieties was used as an indicator to follow the assembly, which was reversibly tuned by temperature variation at different pH conditions. Supramolecular assemblies from these dendronized amphiphiles exhibited enhanced supramolecular chirality, which was dominated mainly by the interaction balance between TPE with dendritic OEG and TPE with POG moieties and was modulated through different solvation by changing solution temperature or pH conditions. More interestingly, ethoxyl-terminated dendritic OEG provided a much stronger shielding effect than its methoxyl-terminated counterpart to prevent amino groups within the peptide from protonation, even in strong acidic conditions, resulting in different responsive behavior to the solution temperature and pH conditions for these supramolecular aggregates.

Solvent-Directed Hierarchical Self-Assembly of Tetraphenylpyrazine-Cholesterol with Amplified Circularly Polarized Luminescence

It is important to identify the effect of assembly and aggregation on the chirality transfer and energy transmission in supramolecular polymer system, since the unordered aggregation is insufficient to promote luminescence enhancement and chirality transfer, even causing the negative effect. Another key issue is to identify the solvent effect on hierarchically chiral self-assembly. Herein, we designed an AIE-core based building block, tetraphenylpyrazine-cholesterol (TPP-Chol), to explore how the solvent component influences chirality transfer and energy transmission of its aggregates and/or assemblies. Interestingly, the hierarchical assembly behavior was realized in the mixture of MeOH/CHCl3 highly dependent on the MeOH content. During the solvent-directed hierarchical assembly, the morphologic transformations, such as nanoribbons with a width of 150 nm, twisted nanoribbons with helical pitch of 420 nm, nanoribbon clusters, and microflowers with an average diameter of 5.5 μm, were realized with obvious chirality amplification for both circular dichroism (CD) and circularly polarized luminescence (CPL) measurements. The hierarchical assembly of TPP-Chol was also demonstrated by a time-dependent CD test. The work points out the complexity and dynamic of hierarchically chiral self-assembly regulated by the solvent effect, which would be helpful for the development of supramolecular materials with enhanced CPL performance and dynamic chirality.

Helical Self-Assembly and Fe3+ Detection of V-Shaped AIE-Active Chiral Tetraphenylbutadiene-Based Polyamides

Chiral aggregation-induced emission (AIE) molecules have drawn attention for their helical self-assembly and special optical properties. The helical self-assembly of AIE-active chiral non-linear main-chain polymers can produce some desired optical features. In this work, a series of V-shaped chiral AIE-active polyamides P1-C3, P1-C6, P1-C12 and linear P2-C3, P2-C6, bearing n-propyl/hexyl/dodecyl side-chains, based on tetraphenylbutadiene (TPB), were prepared. All target main-chain polymers exhibit distinct AIE characteristics. The polymer P1-C6 with moderate length alkyl chains shows better AIE properties. The V-shaped main-chains and the chiral induction of (1R,2R)-(+)-1,2-cyclohexanediamine in each repeating unit promote the polymer chains display helical conformation, and multiple helical polymer chains induce nano-fibers helicity when the polymer chains aggregate and self-assemble in THF/H2 O mixtures. Simultaneously, the helical conformation polymer chains and helical nano-fibers cause P1-C6 produce strong circular dichroism (CD) signals with positive Cotton effect. Moreover, P1-C6 could also occur fluorescence quenching response to Fe3+ selectively with a low detection limit of 3.48 μmol/L.

Liquid Crystals Doped with Chiral Fluorescent Polymer: Multi-Color Circularly Polarized Fluorescence and Room-Temperature Phosphorescence with High Dissymmetry Factor and Anti-Counterfeiting Application

Chiral nematic liquid crystals (N*-LCs) can tremendously amplify circularly polarized luminescence (CPL) signals. Doped emissive N*-LCs have been substantially explored. However, their CPL performances still need to be improved, mainly due to the unsatisfying helical twisting power (HTP) of commonly used chiral fluorescent dopants. Chiral fluorescent helical polymers (CFHPs) have outstanding optical activity and CPL performance. The present contribution reports the first success in constructing emissive N*-LCs by doping CFHP into nematic liquid crystals (5CB, N-LCs). The helical assembly structures of N*-LCs effectively amplify the CPL signals of the CFHP. Owing to the high HTP of CFHP, the selective reflection band of N*-LC can be adjusted to fully cover its emission band. A nearly pure CPL with a dissymmetry factor (glum ) up to -1.87 is realized at 9 wt% doping concentration. Taking advantage of the selective reflection mechanism, multi-color CPL-active N*-LCs with high glum are fabricated via further adding achiral fluorophores. Also noticeably, circularly polarized room-temperature phosphorescence with glum up to -1.57 is achieved. Anti-counterfeiting application is demonstrated by exploiting multi-mode optical characteristics of the created N*-LCs. The established strategy for constructing emissive N*-LCs provides a platform for future exploring of CPL-active N*-LCs.

Cascade energy transfer boosted near-infrared circularly polarized luminescence of nanofibers from an exclusively achiral system

We constructed chiral supramolecular nanofibers for light harvesting based on symmetry-breaking, and these can generate near-infrared circularly polarized luminescence (CPL) with high dissymmetry factor (g_lum) through a synergistic energy transfer and chirality transfer process. Firstly, the achiral molecule BTABA was assembled into a symmetry-breaking assembly using a seeded vortex strategy. Subsequently, the chiral assembly can endow the two achiral acceptors, Nile Red (NR) and Cyanine 7 (CY7), with supramolecular chirality, as well as chiroptical properties. CY7 can reach an excited state and emit near-infrared light through a cascade energy transfer process from BTABA to NR and then to CY7, but cannot directly acquire energy from the excited BTABA. Significantly, the near-infrared CPL of CY7 can be obtained with a boosted g_lum value of 0.03. This work will provide a deep insight into the preparation of materials with near-infrared CPL activity from an exclusively achiral system.

Reversible Inversion of Circularly Polarized Luminescence in a Coassembly Supramolecular Structure with Achiral Sulforhodamine B Dyes

The dynamic control of circularly polarized luminescence (CPL) has far-reaching significance in optoelectronics, information storage, and data encryption. Herein, we reported the reversible inversion of CPL in a coassembly supramolecular system consisting of chiral molecules L4, which contain two positively charged viologen units, and achiral ionic surfactant sodium dodecyl sulfate (SDS) by introducing achiral sulforhodamine B (SRB) dye molecules. The chirality of CPL in the coassemblies can be efficiently regulated and inverted by simply adjusting the amount of SRB. A series of experimental characterization, including optical spectroscopy, electron microscope, ¹H NMR, and X-ray scattering measurements, suggested that SRB could coassemble with L4/SDS to establish a new stable L4/SDS/SRB supramolecular structure through electrostatic interactions. Moreover, the negative-sign CPL could revert to the positive-sign CPL if titanium dioxide (TiO₂) nanoparticles were used to decompose SRB molecules. The evolution of the CPL inversion process could be cycled at least 5 times without a significant decline in CPL signals when SRB was refueled to the system. Our results provide a facile approach to dynamically regulating the handedness of CPL in a multiple-component supramolecular system via achiral species.

Structurally Induced Chirality of an Achiral Chromophore on Self-Assembled Nanofibers: A Twist Makes It Chiral

The surface domains of self-assembled amphiphiles are well-organized and can perform many physical, chemical, and biological functions. Here, we present the significance of chiral surface domains of these self-assemblies in transferring chirality to achiral chromophores. These aspects are probed using l- and d-isomers of alkyl alanine amphiphiles which self-assemble in water as nanofibers, possessing a negative surface charge. When bound on these nanofibers, positively charged cyanine dyes (CY524 and CY600), each having two quinoline rings bridged by conjugated double bonds, show contrasting chiroptical features. Interestingly, CY600 displays a bisignated circular dichroic (CD) signal with mirror-image symmetry, while CY524 is CD silent. Molecular dynamics simulations reveal that the model cylindrical micelles (CM) derived from the two isomers exhibit surface chirality and the chromophores are buried as monomers in mirror-imaged pockets on their surfaces. The monomeric nature of template-bound chromophores and their binding reversibility are established by concentration- and temperature-dependent spectroscopies and calorimetry. On the CM, CY524 displays two equally populated conformers with opposite sense, whereas CY600 is present as two pairs of twisted conformers in each of which one is in excess, due to differences in weak dye-amphiphile hydrogen bonding interactions. Infrared and NMR spectroscopies support these findings. Reduction of electronic conjugation caused by the twist establishes the two quinoline rings as independent entities. On-resonance coupling between the transition dipoles of these units generates bisignated CD signals with mirror-image symmetry. The results presented herein provide insight on the little-known structurally induced chirality of achiral chromophores through transfer of chiral surface information.

Intense Circularly Polarized Fluorescence and Room-Temperature Phosphorescence in Carbon Dots/Chiral Helical Polymer Composite Films

Chiral carbon dots (C-dots) with a circularly polarized fluorescence (CPF) property have attracted tremendous attention due to their significant applications in chiral optoelectronics and theranostics. However, constructing circularly polarized room-temperature phosphorescent (CPRTP) C-dots remains a great challenge. Herein, a strategy is established to achieve efficient CPF and CPRTP emissions in C-dots/chiral helical polymer bilayer composite film. Taking advantage of the chiral filter effect of chiral helical polymer, intense CPF and CPRTP emissions with large dissymmetric factors up to 1.4 × 10^-1 and 1.2 × 10^-2 are respectively obtained, even though there is only a simple interface contact between the C-dots layer and the chiral helical polymer layer. More importantly, white-color CPF emission and multiple information display and encryption are further realized based on the prepared chiral luminescent composite films.

Modulus watch: In situ determination of the gel modulus by timing the fluorescence color change

The gel modulus, a key parameter for gel materials, is traditionally determined by cumbersome rheometer. Recently, probe technologies occur to meet the requirements of in situ determination. Till now, in situ and quantitatively testing of gel materials with unabridged structure informations still remains a challenge. Here, we provide a facile, in situ approach to determine the gel modulus, by timing the aggregation of a doped fluorescence probe. The probe shows green emission during aggregation and shifts to blue once it forms aggregates. The higher modulus of the gel, the longer probe's aggregation time. Furthermore, a quantitative correlation of gel modulus with the aggregation time is established. The in situ method not only facilitates the scientific researches in the field of gels, but also provides a new approach for spatiotemporal materials.

Air-tolerant upconverted circularly polarized luminescence enabled by confined space of chiral micelle

Circularly polarized luminescence (CPL) has been widely demonstrated that the circular polarization in excited state can be significantly amplified through the triplet-triplet annihilation-based upconversion (TTA-UC) luminescence process in various chiral nano-assemblies. However, constructing such an upconverted circularly polarized luminescence (UC-CPL) system in the aqueous phase remains a challenge. In this work, a kind of amphiphilic chiral cationic gemini surfactant is utilized to construct chiral spherical micelle in the aqueous phase, whose internal chiral cavity can provide a hydrophobic and deoxygenated environment for air-sensitive TTA-UC system. In addition, due to the co-assembly process between the emitters and chiral micelles, achiral emitters of upconversion pairs exhibit induced chiroptical properties. More importantly, the luminescence dissymmetry factor (g_lum ) can be amplified by one order of magnitude through TTA-UC process. This work provides an effective and useful strategy for realizing UC-CPL in aqueous phase.

Metallophilic Interaction-Mediated Hierarchical Assembly and Temporal-Controlled Dynamic Chirality Inversion of Metal-Organic Supramolecular Polymers

The study of dynamic supramolecular chirality inversion (SMCI) not only helps to deepen the understanding of chiral transfer and amplification in both living organizations and artificially chemical self-assembly systems but also is useful for the development of smart chiral nanomaterials. However, it is still challenging to achieve the dynamic SMCI of the self-aggregation of metal-organic supramolecular polymers with great potential in asymmetric synthesis, chiroptical switches, and circular polarized luminescence. Here, we successfully developed a hierarchical coassembly system based on the mPAzPCC and various metal ions with effective chirality transfer and temporal-controlled SMCI. Due to the dynamic self-assembly and hierarchical chirality transfer of the Ag⁺/mPAzPCC complex driven by metallophilic interaction and coordination, morphological transition with nanoribbons, helical nanoribbons, and chiral nanotubules was successively obtained. Interestingly, the SMCI of chiral nanoaggregates was precisely regulated by solvents and metal ions in the Cu²⁺/mPAzPCC and Mn²⁺/mPAzPCC system. Besides, temporal-controlled dynamic SMCI switching from helix to bundled helix was clearly revealed in the aggregation of Cu²⁺/mPAzPCC, Mn²⁺/mPAzPCC, and Bi³⁺/mPAzPCC systems. This work provides a metallophilic interaction-mediated helical assembly pathway to dynamically modulate the chirality of metal-organic complex-based assemblies and deepen the understanding of the hierarchically dynamic self-assembly process, which would be of great potential in metal ion-mediated supramolecular asymmetric catalysis and bioinspired chiral sensing.

A Highly Efficient Fluorescent Sensor Based on AIEgen for Detection of Nitrophenolic Explosives

The detection of nitrophenolic explosives is important in counterterrorism and environmental protection, but it is still a challenge to identify the nitroaromatic compounds among those with a similar structure. Herein, a simple tetraphenylethene (TPE) derivative with aggregation-induced emission (AIE) characteristics was synthesized and used as a fluorescent sensor for the detection of nitrophenolic explosives (2, 4, 6-trinitrophenol, TNP and 2, 4-dinitrophenol, DNP) in water solution and in a solid state with a high selectivity. Meanwhile, it was found that only hydroxyl containing nitrophenolic explosives caused obvious fluorescence quenching. The sensing mechanism was investigated by using fluorescence titration and ¹H NMR spectra. This simple AIE-active probe can potentially be applied to the construction of portable detection devices for explosives.

Vortex Flow-controlled Circularly Polarized Luminescence of Achiral Pt(II) Complex Aggregates Assembled at the Air-Water Interface

Circularly polarized luminescence (CPL) has been researched for various applications by control of characteristics such as chirality and magnitude. Supramolecular chirality has been prepared by vortex motion as a mechanical stimulus; however, CPL has yet to be controlled precisely and reproducibly. In this work, the first precise control of CPL under vortex flow conditions at an air-water interface is reported. The supramolecular chirality of aggregates consisting of an achiral trans-bis(salicylaldiminato)Pt(II) complex bearing hexadecyl chains is induced and controlled with vortex flow at the air-water interface, whereas the complex naturally forms an achiral amorphous solid with non-chiroptical properties under non-vortex conditions. The CPL direction and magnitude (g_lum value) of the Pt(II) complex aggregates can be adjusted precisely according to the vortex conditions, including the rotatory direction and flow rate. Vortex-flow-induced emission enhancement is also observed upon an increase in the rate of the vortex flow.

Reversible Chiral Optical Switching Based on Co-Assembled Spiropyran Gels

In recent years, it has been very interesting to dynamically adjust the emission of circularly polarized luminescence (CPL) materials through external stimulation due to their applications and the fundamental interest in them. In this work, luminescence-tunable and light-responsive supramolecular co-assembly CPL-active materials are fabricated by mixing an achiral functional spiropyran (SP-COOH) molecule with a chiral gelator. The spiropyran achieves a reversible change between a white closed ring state spiropyran and a purple zwitterionic merocyanine state in supramolecular co-assembly gels under alternate visible (vis) and ultraviolet (UV) light irradiation. The gel shows strong CPL signals due to the chirality transfer in co-assembly systems. These signals could change reversibly under alternate exposure to UV and vis light. Therefore, utilizing the multistimulus-responsive CPL signals in different states, a CPL switch of the supramolecular system signal according to the combinatorial control of UV-vis light irradiation is constructed.

Manipulating the Assembly of Au Nanoclusters for Luminescence Enhancement and Circularly Polarized Luminescence

Au nanocluster (AuNCs)-based luminescent functional materials have attracted the interest of researchers owing to their small size, tractable surface modification, phosphorescence lifetime and biocompatibility. However, the poor luminescence quantum yield (QY) of AuNCs limits their practical applications. Herein, we synthesized a type of AuNCs modified by 4,6-diamino-2-mercaptopyrimidine hydrate (DPT-AuNCs). Furthermore, organic acids, i.e., citric acid (CA) and tartaric acid (TA), were chosen for co-assembly with DPT-AuNCs to produce AuNCs-based luminescent materials with enhanced emission. Firstly, it was found that CA could significantly enhance the emission of DPT−AuNCs with the formation of red emission nanofibers (QY = 17.31%), which showed a potential for usage in I⁻ detection. The n···π/π···π interaction between the CA and the DPT ligand was proposed as crucial for the emission. Moreover, chiral TA could not only improve the emission of DPT-AuNCs, but could also transfer its chirality to DPT-AuNCs and induce the formation of circularly polarized luminescence (CPL)-active nanofibers. It was demonstrated that the CPL signal could increase 4.6-fold in a ternary CA/TA/DPT-AuNCs co-assembly system. This work provides a convenient way to build AuNCs-based luminescent materials as probes, and opens a new avenue for building CPL-active materials by achiral NCs through a co-assembly strategy.

Axially chiral 1,1'-bicarbazolyls with near-ultraviolet circularly polarized luminescence

The facile synthesis and chiroptical properties of a new family of circularly polarized luminescence (CPL) materials, axially chiral 1,1'-bicarbazolyls (BiCz), are reported. The BiCz derivatives emitted intense near-ultraviolet photoluminescence, with a peak at ∼380 nm. The BiCz enantiomers showed mirror-image circular dichroism and CPL, with g_lum values on the order of 10^-4 in solution.

Pillar-Layer Chiral MOFs as a Crystalline Platform for Circularly Polarized Luminescence and Single-Phase White-Light Emission

The construction of circularly polarized luminescence (CPL) materials with high porosity and high rigidity is still challenging. Herein, we propose a chiral reticular chemistry strategy to prepare the homochiral porous metal-organic frameworks (MOFs) as CPL-active materials. Two pairs of enantiomeric MOFs are synthesized through the self-assembly of chiral D/L-cam (DL-camphorates) and achiral fluorescent ligand TPB (1,2,4,5-tetra(pyridin-4-yl)benzene). The g_lum values of Cd-CMOF-D and Cd-CMOF-L were up to 0.010 and 0.009; the high g_lum values could be compared to those of the partially pure multicomponent self-assembly systems obtained by the complicated process. We further trace the generation and transfer of the hierarchical chirality from chiral molecule to 3D framework, demonstrating that the CPL was dominated by the original molecular chirality rather than the global chirality of the hierarchical structure. Moreover, the single-phase white-light materials with nearly ideal CIE coordinates (0.33, 0.33) were constructed through the introduction of dye emitters into Zn-CMOF (Zn-based chiral MOF). This work provided not only an insightful view of the chirality transfer and disappearance mechanism but also an efficient method for the preparation of the highly porous CPL materials.

Fluorescent TPE Macrocycle Relayed Light-Harvesting System for Bright Customized-Color Circularly Polarized Luminescence

Artificial systems for sequential chirality transmission/amplification and energy relay are perpetual topics that entail learning from nature. However, engineering chiral light-harvesting supramolecular systems remains a challenge. Here, we developed new chiral light-harvesting systems with a sequential Förster resonance energy transfer process where a designed blue-violet-emitting BINOL (1,1'-Bi-2-naphthol) compound, BINOL-di-octadecylamide (BDA), functions as an initiator of chirality and light absorbance, a new green-emitting hexagonal tetraphenylethene-based macrocycle (TPEM) with aggregation-induced emission serves as a conveyor, and Nile red (NiR) or/and a near-infrared dye, tetraphenylethene (TPE)-based benzoselenodiazole (TPESe), are the terminal acceptors. Benefiting from the close contact and large optical overlap between donors and acceptors at each level, triad and tetrad relaying systems sequentially and efficiently furnish chirality transmission/amplification and energy transfer along the cascaded line BDA-TPEM-NiR (or/and TPESe), leading to bright customized-color circularly polarized luminescence (CPL) and bright white-light-emitting CPL (CIE coordinates: 0.33, 0.34) with an amplified dissymmetry factor (glum) of 3.5 × 10-2 over a wide wavelength range. This work provides a new direction for the construction of chiral light-harvesting systems for a broad range of applications in chiroptical physics and chemistry.

Novel Quinolizine AIE System: Visualization of Molecular Motion and Elaborate Tailoring for Biological Application

Molecular motions are ubiquitous in nature and they immutably play intrinsic roles in all actions. However, exploring appropriate models to decipher molecular motions is an extremely important but very challenging task for researchers. Considering aggregation-induced emission (AIE) luminogens possess their unique merits to visualize molecular motions, it is particularly fascinating to construct new AIE systems as models to study molecular motion. Herein, a novel quinolizine (QLZ) AIE system was constructed based on the restriction intramolecular vibration (RIV) mechanism. It was demonstrated that QLZ could act as an ideal model to visualize single-molecule motion and macroscopic molecular motion via fluorescence change. Additionally, further elaborate tailoring of this impressive core achieved highly efficient reactive oxygen species production and realized fluorescence imaging-guided photodynamic therapy applications, which confirms the great application potential of this new AIE-active QLZ core. Therefore, this work not only provides an ideal model to visualize molecular motion but also opens a new way for the application of AIEgens.

Chiral assembly of organic luminogens with aggregation-induced emission

Chirality is important to chemistry, biology and optoelectronic materials. The study on chirality has lasted for more than 170 years since its discovery. Recently, chiral materials with aggregation-induced emission (AIE) have attracted increasing interest because of their fascinating photophysical properties. In this review, we discussed the recent development of chiral materials with AIE properties, including their molecular structures, self-assembly and functions. Generally, the most effective strategy to design a chiral AIE luminogen (AIEgen) is to attach a chiral scaffold to an AIE-active fluorophore through covalent bonds. Moreover, some propeller-like or shell-like AIEgens without chiral units exhibit latent chirality upon mirror image symmetry breaking. The chirality of achiral AIEgens can also be induced by some optically active molecules through non-covalent interactions. The introduction of an AIE unit into chiral materials can enhance the efficiency of their circularly polarized luminescence (CPL) in the solid state and the dissymmetric factors of their helical architectures formed through self-assembly. Thus, highly efficient circularly polarized organic light-emitting diodes (CPOLEDs) with AIE characteristics are developed and show great potential in 3D displays. Chiral AIEgens are also widely utilized as "turn on" sensors for rapid enantioselective determination of chiral reagents. It is anticipated that the present review can entice readers to realize the importance of chirality and attract much more chemists to contribute their efforts to chirality and AIE study.

Thermoresponsive Supramolecular Assemblies from Dendronized Amphiphiles To Form Fluorescent Spheres with Tunable Chirality

Balance between self-association of structural units and self-repulsion from crowding-induced steric hindrance accounts for the supramolecular assembly of the amphiphilic entities to form ordered structures, and solvation provides a toolbox to conveniently modulate the assemblies through differential interactions to various structural units. Here we report solvation-modulated supramolecular chiral assembly in aqueous solutions of amphiphilic dendronized tetraphenylethylenes (TPEs) with three-folded dendritic oligoethylene glycols (OEGs) through dipeptide Ala-Gly linkage. These dendronized amphiphiles can form supramolecular spheres with enhanced supramolecular chirality, which is tunable and dependent on solvation. These nanosized spherical aggregates exhibit thermoresponsive behavior, and their cloud point temperatures are dependent on mixed solvent of water and THF. The phase transition temperatures increase with water fractions due to water-driven shifting of OEG moieties from interiors of the aggregates to their peripheries. Furthermore, the thermally induced dehydration and collapse of OEG moieties mediate the reversible aggregation and deaggregation between the spheres, imparting tunable aggregation-induced fluorescent emission (AIE) and supramolecular chirality. Both experimental results and molecular dynamic simulations have highlighted that reversible chirality transformations of the amphiphilic dendronized assemblies mediated by solvation through change solvent quality or thermally dehydration are dependent on the balance between interactions of OEG dendrons with TPE moieties and with the solvent molecules.

Aggregation-Induced Emission-Active Poly(phenyleneethynylene)s for Fluorescence and Raman Dual-Modal Imaging and Drug-Resistant Bacteria Killing

Poly(phenyleneethynylene) (PPE) is a widely used functional conjugated polymer with applications ranging from organic optoelectronics and fluorescence sensors to optical imaging and theranostics. However, the fluorescence efficiency of PPE in aggregate states is generally not as good as their solution states, which greatly compromises their performance in fluorescence-related applications. Herein, a series of PPE derivatives with typical aggregation-induced emission (AIE) properties is designed and synthesized. In these PPEs, the diethylamino-substituted tetraphenylethene units function as the long-wavelength AIE source and the alkyl side chains serve as the functionalization site. The obtained AIE-active PPEs with large π-conjugation show strong aggregate-state fluorescence, interesting self-assembly behaviors, inherently enhanced alkyne vibrations in the Raman-silent region of cells, and efficient antibacterial activities. The PPE nanoparticles with good cellular uptake capability can clearly and sensitively visualize the tumor region and residual tumors via their fluorescence and Raman signals, respectively, to benefit the precise tumor resection surgery. After post-functionalization, the obtained PPE-based polyelectrolyte can preferentially image bacteria over mammalian cells and possesses efficient photodynamic killing capability against Gram-positive and drug-resistant bacteria. This work provides a feasible design strategy for developing functional conjugated polymers with multimodal imaging capability as well as photodynamic antimicrobial ability.

Aggregation-induced barrier to oxygen (AIBO)—A new AIE mechanism for metal cluster with phosphorescence

Metal clusters are useful phosphors, but highly luminescent examples are quite rare. Usually, the phosphorescence of metal clusters is hindered by ambient O₂ molecules. Transforming this disadvantage into an advantage for meaningful applications of metal clusters presents a formidable challenge. In this work, we used ligand engineering to judiciously prepare colour-tuneable and brightly emitting Cu(I) clusters that are ultrasensitive to O₂ upon dispersion in a fluid solution or in a solid matrix. When the O₂ scavenger dimethyl sulfoxide (DMSO) was used as the solvent, joint photo- and oxygen-controlled multicolour switches were achieved for the first time for metal cluster-based photopatterning and photo-anticounterfeiting. More importantly, an aggregation-induced barrier to oxygen, a new aggregation-induced emission mechanism for metal clusters, was proposed, providing a new pathway to realizing the intense emission of metal clusters in the aggregated state. These results are expected to promote the application of metal clusters and enrich the luminescence theory of metal cluster aggregates.

Cholesteric Liquid Crystalline Polyether with Broad Tunable Circularly Polarized Luminescence

Strong circularly polarized luminescence (CPL) with high purity and broad tunability was achieved in a new type of polyether-based cholesteric liquid crystalline (CLC) copolymers comprising chiral cholesteryl, nematic mesogens, and cross-linkable moieties. The phase boundary diagram of the copolymers was constructed, wherein the CLC phase in a wide composition and temperature window down to room temperature was achieved. Furthermore, reflection colors across the infrared and visible light regions can be continuously tuned by altering composition or temperature, which can be further fixed in the flexible CLC elastomer by photo-cross-linking. Introducing achiral dyes in the CLC thin films can generate strong CPL with distinct handedness and high dissymmetry factors (g_lum). Particularly, the left-handed full-color CPL is obtained by selective circularly polarized scattering in the spectral region outside the band gap of the CLC thin film, and the right-handed CPL with g_lum up to -1.05 is achieved within the band gap of the CLC thin film following the selective circularly polarized reflection mechanism. This type of CPL active material is expected to have potential applications in liquid crystal display and photonics.

Halogen Bonded Chiral Emitters: Generation of Chiral Fractal Architecture with Amplified Circularly Polarized Luminescence

Self-assembled chiroptical materials have attracted considerable attention due to their great applications in wide fields. During the chiral self-assembly, it remains unknown how achiral molecules can affect the assembly process and their final chiroptical performance. Herein, we report an achiral molecule directed chiral self-assembly via halogen bonds, exhibiting not only an unprecedented chiral fractal architecture but also significantly amplified circularly polarized luminescence (CPL). Two axially chiral emitters with halogen bond sites co-assemble with an achiral 1,4-diiodotetrafluorobenzene (F₄ DIB) and well-ordered chiral fractal structures with asymmetry amplification are obtained. The enhancement of the dissymmetry factors of the assemblies was up to 0.051 and 0.011, which was approximately 100 folds than those of the corresponding molecules. It was found that both the design of the chiral emitter and the highly directional halogen bond played an important role in hierarchically chirality transfer from chiral emitters to the micrometer scale chiral fractal morphology and amplified dissymmetry factors. We hope that this strategy can give a further insight into the fabrication of structurally unique featured highly efficient chiroptical materials.

Multilevel Chirality Transfer from Amino Acid Derivatives to Circularly Polarized Luminescence-Active Nanoparticles in Aqueous Medium

Chirality at different levels is widely observed in nature, but the clue to connect it all together, and the way chirality transfers among different levels are still obscure. Herein, a l-/d-lysine-based self-assembly system was constructed, in which two-step chirality transfer among three different levels was observed in aqueous solution. The chirality originated from the point chirality of amino acid derivatives l-/d-PyLys hydrochloride, and was transferred to the planar conformational chirality of water-soluble pillar[5]arene pR-/pS-WP5. Then, with the aid of pR-/pS-WP5, nanoparticles were formed that exhibited L-/R-handed circularly polarized luminescence with a dissymmetry factor of up to ±0.001, arising from pyrene chiral excimers. This multilevel chirality transfer not only provides a perspective to trace potential clues, and to pursue certain ways by which the chirality transfers, but also offers a strategy to create controllable CPL emission in aqueous media.

A New Kind of RIV-type AIEgens and Their Applications for the Construction of Multifunctional Luminescent MOFs

In this work, a new kind of butterfly-like molecules of oxacalix[2]arene[2]pyrazine (OAP) are reported, which exhibit typical characteristics of aggregation-induced emission (AIE) via the restriction of intramolecular vibration (RIV) mechanism. Unlike any of the reported RIV-type AIE molecules, the synthetic procedures of which are complicated and associated high costs, OAP AIEgens can be synthesized in a facile manner by a one-step catalyst-free reaction using commercially available materials. Notably, OAP AIEgens are ideal ligands for constructing metal-organic frameworks (MOFs) due to their built-in coordination sites of pyrazine groups. OAP-based MOFs exhibit multiple potential applications in reversible gas response, encrypted information storage, and construction of white light-emitting devices. This work enriches limited kinds of RIV-type AIEgens, offers additional selections of bridging ligands for constructing luminescent MOFs and provides a visualized prototype to understand the effect of RIV process on the luminescence property of MOFs.

Self-Assembly and Photochemistry of a Pyrene-Methyl Viologen Supramolecular Fiber System

This paper reports the self-assembly of a donor-acceptor system into nanoscopic structures and the photo processes taking place within these structures. The donor employed is pyrene linked to two β-cyclodextrin molecules (CD-PY-CD), and adamantane-linked methyl viologen attached to the three arms of mesitylene (Ms-(MV²⁺-AD)₃) is the acceptor. CD-PY-CD and Ms-(MV²⁺-AD)₃ when dissolved in water self-assembled into vesicles, which joined together to give long fibers. The self-assembly was studied using spectroscopic and microscopic techniques. Fluorescence of the pyrene chromophore was quenched within the self-assembled system due to efficient photoinduced electron transfer to methyl viologen. Photoinduced electron transfer within the assembly is confirmed through identification of product radical ions in flash photolysis experiments. Steady-state irradiation of the self-assembled system in an optical bench led to the formation of methyl viologen radical cation, which was stable for a few hours. Longevity of the radical cation was attributed to the fast reaction of pyrene radical cation with adjacent pyrene to give an unstable adduct, which slows down the back electron transfer process.