Engineering a Bifunctional Phr60-Rap60-Spo0A Quorum-Sensing Molecular Switch for Dynamic Fine-Tuning of Menaquinone-7 Synthesis in Bacillus subtilis

Adaptive laboratory evolution for improved tolerance of vitamin K in Bacillus subtilis

Menaquinone-7 (MK-7), a subtype of vitamin K2 (VK2), assumes crucial roles in coagulation function, calcium homeostasis, and respiratory chain transmission. The production of MK-7 via microbial fermentation boasts mild technological conditions and high biocompatibility. Nevertheless, the redox activity of MK-7 imposes constraints on its excessive accumulation in microorganisms. To address this predicament, an adaptive laboratory evolution (ALE) protocol was implemented in Bacillus subtilis BS011, utilizing vitamin K3 (VK3) as a structural analog of MK-7. The resulting strain, BS012, exhibited heightened tolerance to high VK3 concentrations and demonstrated substantial enhancements in biofilm formation and total antioxidant capacity (T-AOC) when compared to BS011. Furthermore, MK-7 production in BS012 exceeded that of BS011 by 76% and 22% under static and shaking cultivation conditions, respectively. The molecular basis underlying the superior performance of BS012 was elucidated through genome and transcriptome analyses, encompassing observations of alterations in cell morphology, variations in central carbon and nitrogen metabolism, spore formation, and antioxidant systems. In summation, ALE technology can notably enhance the tolerance of B. subtilis to VK and increase MK-7 production, thus offering a theoretical framework for the microbial fermentation production of other VK2 subtypes. Additionally, the evolved strain BS012 can be developed for integration into probiotic formulations within the food industry to maintain intestinal flora homeostasis, mitigate osteoporosis risk, and reduce the incidence of cardiovascular disease. KEY POINTS: • Bacillus subtilis was evolved for improved vitamin K tolerance and menaquinone-7 (MK-7) production • Evolved strains formed wrinkled biofilms and elongated almost twofold in length • Evolved strains induced sporulation to improve tolerance when carbon was limited.

Bacillus subtilis as a host for natural product discovery and engineering of biosynthetic gene clusters

Covering: up to October 2023Many bioactive natural products are synthesized by microorganisms that are either difficult or impossible to cultivate under laboratory conditions, or that produce only small amounts of the desired compound. By transferring biosynthetic gene clusters (BGCs) into alternative host organisms that are more easily cultured and engineered, larger quantities can be obtained and new analogues with potentially improved biological activity or other desirable properties can be generated. Moreover, expression of cryptic BGCs in a suitable host can facilitate the identification and characterization of novel natural products. Heterologous expression therefore represents a valuable tool for natural product discovery and engineering as it allows the study and manipulation of their biosynthetic pathways in a controlled setting, enabling innovative applications. Bacillus is a genus of Gram-positive bacteria that is widely used in industrial biotechnology as a host for the production of proteins from diverse origins, including enzymes and vaccines. However, despite numerous successful examples, Bacillus species remain underexploited as heterologous hosts for the expression of natural product BGCs. Here, we review important advantages that Bacillus species offer as expression hosts, such as high secretion capacity, natural competence for DNA uptake, and the increasing availability of a wide range of genetic tools for gene expression and strain engineering. We evaluate different strain optimization strategies and other critical factors that have improved the success and efficiency of heterologous natural product biosynthesis in B. subtilis. Finally, future perspectives for using B. subtilis as a heterologous host are discussed, identifying research gaps and promising areas that require further exploration.

Dual-sgRNA CRISPRa System for Enhanced MK-7 Production and Salmonella Infection Mitigation in Bacillus subtilis natto Applied to Caco-2 Cells

This study optimized the menaquinone-7 (MK-7) synthetic pathways in Bacillus subtilis (B. subtilis) natto NB205, a strain that originated from natto, to enhance its MK-7 production. Utilizing mutation breeding, we developed NBMK308, a mutant strain that demonstrated a significant 117.23% increase in MK-7 production. A comprehensive transcriptome analysis identified two key genes, ispA and ispE, as being critical in MK-7 synthesis. The dual-sgRNA CRISPRa system was utilized to achieve precise regulation of ispA and ispE in the newly engineered strain, A3E3. This strategic modulation resulted in a significant enhancement of MK-7 production, achieving increases of 20.02% and 201.41% compared to traditional overexpression systems and the original strain NB205, respectively. Furthermore, the fermentation supernatant from A3E3 notably inhibited Salmonella invasion in Caco-2 cells, showcasing its potential for combating such infections. The safety of the dual-sgRNA CRISPRa system was confirmed through cell assays. The utilization of the dual-sgRNA CRISPRa system in this study was crucial for the precise regulation of key genes in MK-7 synthesis, leading to a remarkable increase in production and demonstrating additional therapeutic potential in inhibiting pathogenic infections. This approach effectively combined the advantages of microbial fermentation and biotechnology, addressing health and nutritional challenges.

A Novel Method for Creating Heterologous Lethal Antibiotic Producers by Screening from Combi-OGAB Library with Various Promoters in a Biosynthetic Gene Cluster

In this study, we devised a novel method to create heterologous producers of lethal antibiotics against host bacteria. Heterologous producers cannot be created when antibiotics are toxic to host bacteria. To overcome this challenge, we developed a novel method involving construction of a combinatorial library with various promoters and screening based on the production. To realize this, we utilized Combi-OGAB (Combinatorial Ordered Gene Assembly in Bacillus subtilis), which technology can effectively construct diverse combinatorial library and accelerate screening procedures. B. subtilis and Gramicidin S were selected as the host bacterium and the targeted antibiotic, respectively. The screened producer from Combi-OGAB screening cycles achieved >30-fold productivity over the lethal level. These results suggest that our strategy has the potential to maximize the phenotypic resistance of host bacteria to create heterologous lethal antibiotic producers.

Enhancing menaquinone-7 biosynthesis through strengthening precursor supply and product secretion

Menaquinone-7 (MK-7) is an important class of vitamin K2 that is essential in human health and can prevent osteoporosis and cardiovascular disease. However, due to the complex synthesis pathway, the synthesis efficiency is low. The main objective of this study was to explore the effect of enhanced supply of precursors in Bacillus natto. Three precursors of pyruvate, shikimic acid, and sodium glutamate were chosen to investigate the effect of enhanced supply of precursors on MK-7 synthesis. Then, the optimal concentrations, different combinations, and different adding times were systematically studied, respectively. Results showed that the combination of shikimic acid and sodium glutamate could boost MK-7 production by 2 times, reaching 50 mg/L of MK-7 titer and 0.52 mg/(L·h) of MK-7 productivity. Furthermore, adding shikimic acid and sodium glutamate initially and feeding pyruvate at 48 h and 72 h increased MK-7 production to 58 mg/L. At the same time, the expression of the three related genes was also significantly upregulated. Subsequently, a new fermentation strategy combining the precursors enhancement and product secretion was proposed to enhance MK-7 yield and MK-7 productivity to 63 mg/L and 0.45 mg/(L·h). This study proposed a new fermentation regulation strategy for the enhancement of vitamin K2 biosynthesis.

CRISPR-dCpf1 mediated whole genome crRNA inhibition library for high-throughput screening of growth characteristic genes in Bacillus amyloliquefaciens LB1ba02

Bacillus amyloliquefaciens LB1ba02 is generally recognized as food safe (GRAS) microbial host and important enzyme-producing strain in the industry. However, autolysis affects the growth of bacteria, further affecting the yield of target products. Besides, the restriction-modification system, existed in B. amyloliquefaciens LB1ba02, results in a low transformation efficiency, which further leads to a lack of high-throughput screening tools. Here, we constructed a genome-wide crRNA inhibition library based on the CRISPR/dCpf1 system and high-throughput screening of related genes affecting the cell growth and autolysis using flow cytometry in B. amyloliquefaciens LB1ba02. The whole genome crRNA library was first validated for resistance to the toxic chemical 5-fluorouracil, and then used for validation of essential genes. In addition, seven gene loci (oppD, flil, tuaA, prmA, sigO, hslU, and GE03231) that affect the growth characteristics of LB1ba02 were screened. Among them, the Opp system had the greatest impact on growth. When the expression of operon oppA-oppB-oppC-oppD-oppF was inhibited, the cell growth difference was most significant. Inhibition of other sites could also promote rapid growth of bacteria to varying degrees; however, inhibition of GE03231 site accelerated cell autolysis. Therefore, the whole genome crRNA inhibition library is well suited for B. amyloliquefaciens LB1ba02 and can be further applied to high-throughput mining of other functional genes.

Advances in regulating vitamin K2 production through metabolic engineering strategies

Vitamin K2 (menaquinone, VK2, MK) is an essential lipid-soluble vitamin that plays critical roles in inhibiting cell ferroptosis, improving blood clotting, and preventing osteoporosis. The increased global demand for VK2 has inspired interest in novel production strategies. In this review, various novel metabolic regulation strategies, including static and dynamic metabolic regulation, are summarized and discussed. Furthermore, the advantages and disadvantages of both strategies are analyzed in-depth to highlight the bottlenecks facing microbial VK2 production on an industrial scale. Finally, advanced metabolic engineering biotechnology for future microbial VK2 production will also be discussed. In summary, this review provides in-depth information and offers an outlook on metabolic engineering strategies for VK2 production.

Construction of cascade circuits for dynamic temporal regulation and its application to PHB production

BACKGROUND

To maximize the production capacity and yield of microbial cell factories, metabolic pathways are generally modified with dynamic regulatory strategies, which can effectively solve the problems of low biological yield, growth retardation and metabolic imbalance. However, the strategy of dynamic regulating multiple genes in different time and order is still not effectively solved. Based on the quorum-sensing (QS) system and the principle of cascade regulation, we studied the sequence and time interval of gene expression in metabolic pathways.

RESULTS

We designed and constructed a self-induced dynamic temporal regulatory cascade circuit in Escherichia coli using the QS system and dual regulatory protein cascade and found that the time intervals of the cascade circuits based on the Tra, Las system and the Lux, Tra system reached 200 min and 150 min, respectively. Furthermore, a dynamic temporal regulatory cascade circuit library with time intervals ranging from 110 to 310 min was obtained based on this circuit using promoter engineering and ribosome binding site replacement, which can provide more selective synthetic biology universal components for metabolic applications. Finally, poly-β-hydroxybutyric acid (PHB) production was taken as an example to demonstrate the performance of the cascade circuit library. The content of PHB increased 1.5-fold. Moreover, circuits with different time intervals and different expression orders were found to have different potentials for application in PHB production, and the preferred time-interval circuit strain C2-max was identified by screening.

CONCLUSIONS

The self-induced dynamic temporal regulation cascade circuit library can enable the expression of target genes with sequential changes at different times, effectively solving the balance problem between cell growth and product synthesis in two-stage fermentation and expanding the application of dynamic regulatory strategies in the field of metabolic engineering.

Exploring the potential of Bacillus subtilis as cell factory for food ingredients and special chemicals

BACKGROUND

Bacillus subtilis has been established as model microorganism for fundamental research in the laboratory on protein production/secretion and sporulation and as model bacterium for controlling spoilage in the food industry. It has also been used for production of (commercial) enzymes and several secondary metabolites such as vitamins. However, this doesn't fully reflect the potential of B. subtilis as a cell-factory. Here, various strains of B. subtilis, including food-grade, spore-deficient strains and industrially used strains, were compared for their growth and metabolic potential. Industry-relevant parameters were analyzed for all strains under various aeration regimes, under anaerobic conditions, in various nutritious and nutrient-limited cultivation media, with and without organic nitrogen sources, and with and without sugar.

RESULTS

Practical experiments were conducted to compare industrial relevant properties like growth rates, intracellular components and extracellular metabolite profile of different B. subtilis strains. Based on growth flexibility in different media, we found that some strains like NCIB3610 and DSM1092 are adapted to inorganic or organic nitrogen source utilization, which is highly relevant when considering a biorefinery approach using various cheap and abundant waste/sidestreams. Secondly, spore-deficient strains such as 3NA, 168 S and PY79S, showed advantages in microbial protein and acetolactate pathway expression, which is associated with applications in food industry for protein supplement and diacetyl production. Lastly, WB800 and PY79S exhibited potential for fermentative production of dipicolinic acid, 2,3-butanediol and lactic acid that could serve as precursors for biopolymers.

CONCLUSION

This study demonstrates the broad potential for more extensive industrial use of Bacillus subtilis in the (bio-based) chemical industry for use of sidestreams, in the personal care industry, in the food industry for food additive production, and in the bio-sustainable industry for biofuel and bio-degradable plastic precursors production. In addition, selecting different B. subtilis strains for specific purposes makes full use of the diversity of this species and increases the potential of B. subtilis in its contribution to the bio-based economy.

Dynamic Metabolic Control: From the Perspective of Regulation Logic

Establishing microbial cell factories has become a sustainable and increasingly promising approach for the synthesis of valuable chemicals. However, introducing heterologous pathways into these cell factories can disrupt the endogenous cellular metabolism, leading to suboptimal production performance. To address this challenge, dynamic pathway regulation has been developed and proven effective in improving microbial biosynthesis. In this review, we summarized typical dynamic regulation strategies based on their control logic. The applicable scenarios for each control logic were highlighted and perspectives for future research direction in this area were discussed.

A Programmable CRISPR/Cas9 Toolkit Improves Lycopene Production in Bacillus subtilis

Bacillus subtilis has been widely used and generally recognized as a safe host for the production of recombinant proteins, high-value chemicals, and pharmaceuticals. Thus, its metabolic engineering attracts significant attention. Nevertheless, the limited availability of selective markers makes this process difficult and time-consuming, especially in the case of multistep biosynthetic pathways. Here, we employ CRISPR/Cas9 technology to build an easy cloning toolkit that addresses commonly encountered obstacles in the metabolic engineering of B. subtilis, including the chromosomal integration locus, promoter, terminator, and guide RNA (gRNA) target. Six promoters were characterized, and the promoter strengths ranged from 0.9- to 23-fold that of the commonly used strong promoter P43. We characterized seven terminators in B. subtilis, and the termination efficiencies (TEs) of the seven terminators are all more than 90%. Six gRNA targets were designed upstream of the promoter and downstream of the terminator. Using a green fluorescent protein (GFP) reporter, we confirmed integration efficiency with the single-locus integration site is up to 100%. We demonstrated the applicability of this toolkit by optimizing the expression of a challenging but industrially important product, lycopene. By heterologous expression of the essential genes for lycopene synthesis on the B. subtilis genome, a total of 13 key genes involved in the lycopene biosynthetic pathway were manipulated. Moreover, our findings showed that the gene cluster ispG-idi-dxs-ispD could positively affect the production of lycopene, while the cluster dxr-ispE-ispF-ispH had a negative effect on lycopene production. Hence, our multilocus integration strategy can facilitate the pathway assembly for production of complex chemicals and pharmaceuticals in B. subtilis. IMPORTANCE We present a toolkit that allows for rapid cloning procedures and one-step subcloning to move from plasmid-based expression to stable chromosome integration and expression in a production strain in less than a week. The utility of the customized tool was demonstrated by integrating the MEP (2C-methyl-d-erythritol-4-phosphate) pathway, part of the pentose phosphate pathway (PPP), and the hetero-lycopene biosynthesis genes by stable expression in the genome. The tool could be useful to engineer B. subtilis strains through diverse recombination events and ultimately improve its potential and scope of industrial application as biological chassis.

Enhanced vitamin K2 production by engineered Bacillus subtilis during leakage fermentation

Menaquinone-7 (MK-7), a valuable member of the vitamin K2 series, is an essential nutrient for humans. It is used for treating coagulation disorders, and osteoporosis, promoting liver function recovery, and preventing cardiovascular diseases. In this study, to further improve the metabolic synthesis of MK-7 by the mutant strain, the effect of surfactants on the metabolic synthesis of MK-7 by the mutant strain Bacillus subtilis 168 KO-SinR (BS168 KO-SinR) was analyzed. The scanning electron microscopy and flow cytometry results showed that the addition of surfactants changed the permeability of the cell membrane of the mutant strain and the structural components of the biofilm. When 0.7% Tween-80 was added into the medium, the extracellular and intracellular synthesis of MK-7 reached 28.8 mg/L and 59.2 mg/L, respectively, increasing the total synthesis of MK-7 by 80.3%. Quantitative real-time PCR showed that the addition of surfactant significantly increased the expression level of MK-7 synthesis-related genes, and the electron microscopy results showed that the addition of surfactant changed the permeability of the cell membrane. The research results of this paper can serve as a reference for the industrial development of MK-7 prepared by fermentation.

Quorum Sensing as a Trigger That Improves Characteristics of Microbial Biocatalysts

Quorum sensing (QS) of various microorganisms (bacteria, fungi, microalgae) today attracts the attention of researchers mainly from the point of view of clarifying the biochemical basics of this general biological phenomenon, establishing chemical compounds that regulate it, and studying the mechanisms of its realization. Such information is primarily aimed at its use in solving environmental problems and the development of effective antimicrobial agents. This review is oriented on other aspects of the application of such knowledge; in particular, it discusses the role of QS in the elaboration of various prospective biocatalytic systems for different biotechnological processes carried out under aerobic and anaerobic conditions (synthesis of enzymes, polysaccharides, organic acids, etc.). Particular attention is paid to the biotechnological aspects of QS application and the use of biocatalysts, which have a heterogeneous microbial composition. The priorities of how to trigger a quorum response in immobilized cells to maintain their long-term productive and stable metabolic functioning are also discussed. There are several approaches that can be realized: increase in cell concentration, introduction of inductors for synthesis of QS-molecules, addition of QS-molecules, and provoking competition between the participants of heterogeneous biocatalysts, etc.).

Advances in mechanisms and engineering of electroactive biofilms

Electroactive biofilms (EABs) are electroactive microorganisms (EAMs) encased in conductive polymers that are secreted by EAMs and formed by the accumulation and cross-linking of extracellular polysaccharides, proteins, nucleic acids, lipids, and other components. EABs are present in the form of multicellular aggregates and play a crucial role in bioelectrochemical systems (BESs) for diverse applications, including biosensors, microbial fuel cells for renewable bioelectricity production and remediation of wastewaters, and microbial electrosynthesis of valuable chemicals. However, naturally occurred EABs are severely limited owing to their low electrical conductivity that seriously restrict the electron transfer efficiency and practical applications. In the recent decade, synthetic biology strategies have been adopted to elucidate the regulatory mechanisms of EABs, and to enhance the formation and electrical conductivity of EABs. Based on the formation of EABs and extracellular electron transfer (EET) mechanisms, the synthetic biology-based engineering strategies of EABs are summarized and reviewed as follows: (i) Engineering the structural components of EABs, including strengthening the synthesis and secretion of structural elements such as polysaccharides, eDNA, and structural proteins, to improve the formation of biofilms; (ii) Enhancing the electron transfer efficiency of EAMs, including optimizing the distribution of c-type cytochromes and conducting nanowire assembly to promote contact-based EET, and enhancing electron shuttles' biosynthesis and secretion to promote shuttle-mediated EET; (iii) Incorporating intracellular signaling molecules in EAMs, including quorum sensing systems, secondary messenger systems, and global regulatory systems, to increase the electron transfer flux in EABs. This review lays a foundation for the design and construction of EABs for diverse BES applications.

Advances in Synthetic-Biology-Based Whole-Cell Biosensors: Principles, Genetic Modules, and Applications in Food Safety

A whole-cell biosensor based on synthetic biology provides a promising new method for the on-site detection of food contaminants. The basic components of whole-cell biosensors include the sensing elements, such as transcription factors and riboswitches, and reporting elements, such as fluorescence, gas, etc. The sensing and reporting elements are coupled through gene expression regulation to form a simple gene circuit for the detection of target substances. Additionally, a more complex gene circuit can involve other functional elements or modules such as signal amplification, multiple detection, and delay reporting. With the help of synthetic biology, whole-cell biosensors are becoming more versatile and integrated, that is, integrating pre-detection sample processing, detection processes, and post-detection signal calculation and storage processes into cells. Due to the relative stability of the intracellular environment, whole-cell biosensors are highly resistant to interference without the need of complex sample preprocessing. Due to the reproduction of chassis cells, whole-cell biosensors replicate all elements automatically without the need for purification processing. Therefore, whole-cell biosensors are easy to operate and simple to produce. Based on the above advantages, whole-cell biosensors are more suitable for on-site detection than other rapid detection methods. Whole-cell biosensors have been applied in various forms such as test strips and kits, with the latest reported forms being wearable devices such as masks, hand rings, and clothing. This paper examines the composition, construction methods, and types of the fundamental components of synthetic biological whole-cell biosensors. We also introduce the prospect and development trend of whole-cell biosensors in commercial applications.

Application of Quorum Sensing in Metabolic Engineering

Metabolic engineering is widely utilized in the food and other fields and has the benefits of low-cost substrates, eco-friendly fermentation processes, and efficient substrate synthesis. Microbial synthesis by metabolic engineering requires maintaining the productive capacity of the microorganism. Moreover, economic reasons limit the use of inducers in the exogenous synthesis pathway. Most unicellular microorganisms can interact by emitting signaling molecules; this mechanism, known as quorum sensing (QS), is an autoinduced system of microorganisms. With the deepening research on QS systems of different microorganisms, its components are widely used to regulate the metabolic synthesis of microorganisms as a dynamic regulatory system. In this Review, we described the typical bacterial QS mechanisms. Then, we summarized various regulatory strategies for QS and their applications to metabolic engineering. Finally, we underlined the potential for QS modularity in future metabolic engineering and suggested stimulating research on fungal QS systems.

etiBsu1209: A comprehensive multiscale metabolic model for Bacillus subtilis

Genome-scale metabolic models (GEMs) have been widely used to guide the computational design of microbial cell factories, and to date, seven GEMs have been reported for Bacillus subtilis, a model gram-positive microorganism widely used in bioproduction of functional nutraceuticals and food ingredients. However, none of them are widely used because they often lead to erroneous predictions due to their low predictive power and lack of information on regulatory mechanisms. In this work, we constructed a new version of GEM for B. subtilis (iBsu1209), which contains 1209 genes, 1595 metabolites, and 1948 reactions. We applied machine learning to fill gaps, which formed a relatively complete metabolic network able to predict with high accuracy (89.3%) the growth of 1209 mutants under 12 different culture conditions. In addition, we developed a visualization and code-free software, Model Tool, for multiconstraints model reconstruction and analysis. We used this software to construct etiBsu1209, a multiscale model that integrates enzymatic constraints, thermodynamic constraints, and transcriptional regulatory networks. Furthermore, we used etiBsu1209 to guide a metabolic engineering strategy (knocking out fabI and yfkN genes) for the overproduction of nutraceutical menaquinone-7, and the titer increased to 153.94 mg/L, 2.2-times that of the parental strain. To the best of our knowledge, etiBsu1209 is the first comprehensive multiscale model for B. subtilis and can serve as a solid basis for rational computational design of B. subtilis cell factories for bioproduction.

Prenylation: A Critical Step for Biomanufacturing of Prenylated Aromatic Natural Products

Prenylated aromatic natural products (PANPs) have received much attention due to their biomedical benefits for human health. The prenylation of aromatic natural products (ANPs), which is mainly catalyzed by aromatic prenyltransferases (aPTs), contributes significantly to their structural and functional diversity by providing higher lipophilicity and enhanced bioactivity. aPTs are widely distributed in bacteria, fungi, animals, and plants and play a key role in the regiospecific prenylation of ANPs. Recent studies have greatly advanced our understanding of the characteristics and application of aPTs. In this review, we comment on research progress regarding sources, evolutionary relationships, structural features, reaction mechanism, engineering modification, and application of aPTs. Particular emphasis is also placed on recent advances, challenges, and prospects about applications of aPTs in microbial cell factories for producing PANPs. Generally, this review could provide guidance for using aPTs as robust biocatalytic tools to produce various PANPs with high efficiency.

Preparation and self-cleavage of fusion soluble farnesyl diphosphate synthase in E. coli

Farnesyl diphosphate synthase (FPPS) is a crucial protein in terpenoid production. However, its industrial application is limited owing to its low solubility in Escherichia coli. In this study, we focused on ispA encoding FPPS and designed a fusion expression system to reduce inclusion body (IB) formation. Among the chosen fusion tags, the GB1-domain (GB1) exhibited the highest ability to solubilize the recombinant protein. Increased rare tRNA abundance not only improved the GB1-FPPS yield but also increased its soluble level. A "one-step" method for the acquisition of soluble FPPS was also considered. By combining GB1-FPPS expression and Tobacco Etch Virus protease (TEVp) cleavage in vivo, a controllable GB1-FPPS "self-cleavage" system was constructed. Overall, this study provides an efficient approach for obtaining soluble forms of FPPS, which show great potential for use in the soluble expression of other homologous diphosphate synthase.

Genetically encoded biosensors for microbial synthetic biology: From conceptual frameworks to practical applications

Genetically encoded biosensors are the vital components of synthetic biology and metabolic engineering, as they are regarded as powerful devices for the dynamic control of genotype metabolism and evolution/screening of desirable phenotypes. This review summarized the recent advances in the construction and applications of different genetically encoded biosensors, including fluorescent protein-based biosensors, nucleic acid-based biosensors, allosteric transcription factor-based biosensors and two-component system-based biosensors. First, the construction frameworks of these biosensors were outlined. Then, the recent progress of biosensor applications in creating versatile microbial cell factories for the bioproduction of high-value chemicals was summarized. Finally, the challenges and prospects for constructing robust and sophisticated biosensors were discussed. This review provided theoretical guidance for constructing genetically encoded biosensors to create desirable microbial cell factories for sustainable bioproduction.

Enhancing menaquinone-7 biosynthesis by adaptive evolution of Bacillus natto through chemical modulator

Menaquinone-7 (MK-7) is a kind of vitamin K2 playing an important role in the treatment and prevention of cardiovascular disease, osteoporosis and arterial calcification. The purpose of this study is to establish an adaptive evolution strategy based on a chemical modulator to improve MK-7 biosynthesis in Bacillus natto. The inhibitor of 5-enolpyruvylshikimate-3-phosphate synthase (EPSP synthase), glyphosate, was chosen as the chemical modulator to perform the experiments. The final strain ALE-25-40, which was obtained after 40 cycles in 25 mmol/L glyphosate, showed a maximal MK-7 titer of 62 mg/L and MK-7 productivity of 0.42 mg/(L h), representing 2.5 and 3 times the original strain, respectively. Moreover, ALE-25-40 generated fewer spores and showed a higher NADH and redox potential. Furthermore, the mechanism related to the improved performance of ALE-25-40 was investigated by comparative transcriptomics analysis. Genes related to the sporation formation were down-regulated. In addition, several genes related to NADH formation were also up-regulated. This strategy proposed here may provide a new and alternative directive for the industrial production of vitamin K2.

Enhancement of Vitamin K2 Efflux in Bacillus subtilis Natto via a Potential Protein Receptor for Increased Yield

Bacillus subtilis is one of the few strains that can secrete synthetic menaquinone-7 (MK-7) to the outside of the cell, and its purpose and mechanism have not been clearly studied. As an amphiphilic protein naturally synthesized by Bacillus subtilis, the BslA protein may be involved in the inversion of extracellular vitamin K2 solubility. The protein structure in UniProt was used to search for the possible binding sites of MK-7, and the analysis of the higher ranking results of the genetic algorithm showed that the ASP166 residue was likely to be the binding site. They could form a stable hydrogen bond connection through ASP166, and approximately 7 proteins formed the conformation of a fixed naphthoquinone ring. We isolated and obtained the BslA protein by Ni-NTA affinity chromatography. Then, MK-7 was modified by BslA in vitro. A series of experiments, such as SEM, XPS, and WCA, showed that MK-7 and BslA proteins can realize self-assembly and transform from fat-soluble to water-soluble complexes. When the bslA protein in Bacillus subtilis natto was overexpressed, its MK-7 synthesis ability was further improved, especially the extracellular MK-7 content, which increased by 16%. This finding suggests that the BslA protein in Bacillus subtilis is likely to be involved in the extracellular secretion of MK-7 as a receptor.

Understanding and application of Bacillus nitrogen regulation: A synthetic biology perspective

BACKGROUND

Nitrogen sources play an essential role in maintaining the physiological and biochemical activity of bacteria. Nitrogen metabolism, which is the core of microorganism metabolism, makes bacteria able to autonomously respond to different external nitrogen environments by exercising complex internal regulatory networks to help them stay in an ideal state. Although various studies have been put forth to better understand this regulation in Bacillus, and many valuable viewpoints have been obtained, these views need to be presented systematically and their possible applications need to be specified.

AIM OF REVIEW

The intention is to provide a deep and comprehensive understanding of nitrogen metabolism in Bacillus, an important industrial microorganism, and thereby apply this regulatory logic to synthetic biology to improve biosynthesis competitiveness. In addition, the potential researches in the future are also discussed.

KEY SCIENTIFIC CONCEPT OF REVIEW

Understanding the meticulous regulation process of nitrogen metabolism in Bacillus not only could facilitate research on metabolic engineering but also could provide constructive insights and inspiration for studies of other microorganisms.

Improving prodigiosin production by transcription factor engineering and promoter engineering in Serratia marcescens

Prodigiosin (PG), a red linear tripyrrole pigment produced by Serratia marcescens, has attracted attention due to its immunosuppressive, antimicrobial, and anticancer properties. Although many studies have been used to dissect the biosynthetic pathways and regulatory network of prodigiosin production in S. marcescens, few studies have been focused on improving prodigiosin production through metabolic engineering in this strain. In this study, transcription factor engineering and promoter engineering was used to promote the production of prodigiosin in S. marcescens JNB5-1. Firstly, through construing of a Tn5G transposon insertion library of strain JNB5-1, it was found that the DNA-binding response regulator BVG89_19895 (OmpR) can promote prodigiosin synthesis in this strain. Then, using RNA-Seq analysis, reporter green fluorescent protein analysis and RT-qPCR analysis, the promoter P17 (P_RplJ) was found to be a strong constitutive promoter in strain JNB5-1. Finally, the promoter P17 was used for overexpressing of prodigiosin synthesis activator OmpR and PsrA in strain JNB5-1 and a recombinant strain PG-6 was obtained. Shake flask analysis showed that the prodigiosin titer of this strain was increased to 10.25 g/L, which was 1.62-times that of the original strain JNB5-1 (6.33 g/L). Taken together, this is the first well-characterized constitutive promoter library from S. marcescens, and the transcription factor engineering and promoter engineering can be also useful strategies to improve the production of other high value-added products in S. marcescens.

De novo biosynthesis of rubusoside and rebaudiosides in engineered yeasts

High-sugar diet causes health problems, many of which can be addressed with the use of sugar substitutes. Rubusoside and rebaudiosides are interesting molecules, considered the next generation of sugar substitutes due to their low-calorie, superior sweetness and organoleptic properties. However, their low abundance in nature makes the traditional plant extraction process neither economical nor environmental-friendly. Here we engineer baker's yeast Saccharomyces cerevisiae as a chassis for the de novo production of rubusoside and rebaudiosides. In this process, we identify multiple issues that limit the production, including rate-liming steps, product stress on cellular fitness and unbalanced metabolic networks. We carry out a systematic engineering strategy to solve these issues, which produces rubusoside and rebaudiosides at titers of 1368.6 mg/L and 132.7 mg/L, respectively. The rubusoside chassis strain here constructed paves the way towards a sustainable, large-scale fermentation-based manufacturing of diverse rebaudiosides.

Dynamic flux regulation for high-titer anthranilate production by plasmid-free, conditionally-auxotrophic strains of Pseudomonas putida

Anthranilate, an intermediate of the shikimate pathway, is a high-value aromatic compound widely used as a precursor in the production of dyes, fragrances, plastics and pharmaceuticals. Traditional strategies adopted for microbial anthranilate production rely on the implementation of auxotrophic strains-which requires aromatic amino acids or complex additives to be supplemented in the culture medium, negatively impacting production costs. In this work, we engineered the soil bacterium Pseudomonas putida for high-titer, glucose-dependent anthranilate production by repurposing elements of the Esa quorum sensing (QS) system of Pantoea stewartii. The P_esaS promoter mediated a self-regulated transcriptional response that effectively knocked-down the expression of the trpDC genes. Next, we harnessed the synthetic QS elements to engineer a growth-to-anthranilate production switch. The resulting plasmid-free P. putida strain produced the target compound at 3.8 ± 0.3 mM in shaken-flask cultures after 72 h-a titer >2-fold higher than anthranilate levels reported thus far. Our results highlight the value of dynamic flux regulation for the production of intermediate metabolites within highly-regulated routes (such as the shikimate pathway), thereby circumventing the need of expensive additives.

Bottom-up synthetic biology approach for improving the efficiency of menaquinone-7 synthesis in Bacillus subtilis

Background

Menaquinone-7 (MK-7), which is associated with complex and tightly regulated pathways and redox imbalances, is produced at low titres in Bacillus subtilis. Synthetic biology provides a rational engineering principle for the transcriptional optimisation of key enzymes and the artificial creation of cofactor regeneration systems without regulatory interference. This holds great promise for alleviating pathway bottlenecks and improving the efficiency of carbon and energy utilisation.

Results

We used a bottom-up synthetic biology approach for the synthetic redesign of central carbon and to improve the adaptability between material and energy metabolism in MK-7 synthesis pathways. First, the rate-limiting enzymes, 1-deoxyxylulose-5-phosphate synthase (DXS), isopentenyl-diphosphate delta-isomerase (Fni), 1-deoxyxylulose-5-phosphate reductase (DXR), isochorismate synthase (MenF), and 3-deoxy-7-phosphoheptulonate synthase (AroA) in the MK-7 pathway were sequentially overexpressed. Promoter engineering and fusion tags were used to overexpress the key enzyme MenA, and the titre of MK-7 was 39.01 mg/L. Finally, after stoichiometric calculation and optimisation of the cofactor regeneration pathway, we constructed two NADPH regeneration systems, enhanced the endogenous cofactor regeneration pathway, and introduced a heterologous NADH kinase (Pos5P) to increase the availability of NADPH for MK-7 biosynthesis. The strain expressing pos5P was more efficient in converting NADH to NADPH and had excellent MK-7 synthesis ability. Following three Design-Build-Test-Learn cycles, the titre of MK-7 after flask fermentation reached 53.07 mg/L, which was 4.52 times that of B. subtilis 168. Additionally, the artificially constructed cofactor regeneration system reduced the amount of NADH-dependent by-product lactate in the fermentation broth by 9.15%. This resulted in decreased energy loss and improved carbon conversion.

Conclusions

In summary, a "high-efficiency, low-carbon, cofactor-recycling" MK-7 synthetic strain was constructed, and the strategy used in this study can be generally applied for constructing high-efficiency synthesis platforms for other terpenoids, laying the foundation for the large-scale production of high-value MK-7 as well as terpenoids.

Effects of Alkali Stress on the Growth and Menaquinone-7 Metabolism of Bacillus subtilis natto

Menaquinone-7 (MK-7) is an important vitamin K₂, synthesized from the menaquinone parent ring and seven isoprene side chains. Presently, the synthesis of MK-7 stimulated by environmental stress primarily focuses on oxygen stress, while the effect of alkali stress is rarely studied. Therefore, this study researched the effects of alkali stress on the fermentation performance and gene expression of Bacillus subtilis natto. The organism’s growth characteristics, biomass, sporogenesis, MK-7 biosynthesis, and gene expression were analyzed. After a pH 8.5 stress adaptation treatment for 0.5 h and subsequent fermentation at pH 8.5, which promoted the growth of the strain and inhibited the spore formation rate. In addition, biomass was significantly increased (P < 0.05). The conversion rate of glycerol to MK-7 was 1.68 times higher than that of the control group, and the yield of MK-7 increased to 2.10 times. Transcriptomic analysis showed that the MK-7 high-yielding strain had enhanced carbon source utilization, increased glycerol and pyruvate metabolism, enhanced the Embden-Meyerhof pathway (EMP), tricarboxylic acid (TCA) circulation flux, and terpenoid biosynthesis pathway, and promoted the accumulation of acetyl-CoA, the side-chain precursor of isoprene. At the same time, the up-regulation of transketolase increased the metabolic flux of the pentose phosphate (HMP) pathway, which was conducive to the accumulation of D-erythrose 4-phosphate, the precursor of the menadione parent ring. This study’s results contribute to a better understanding of the effects of environmental stress on MK-7 fermentation by Bacillus subtilis natto and the molecular regulatory mechanism of MK-7 biosynthesis.

New synthetic biology tools for metabolic control

In industrial bioprocesses, microbial metabolism dictates the product yields, and therefore, our capacity to control it has an enormous potential to help us move towards a bio-based economy. The rapid development of multiomics data has accelerated our systematic understanding of complex metabolic regulatory mechanisms, which allow us to develop tools to manipulate them. In the last few years, machine learning-based metabolic modeling, Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) derived synthetic biology tools, and synthetic genetic circuits have been widely used to control the metabolism of microorganisms, manipulate gene expression, and build synthetic pathways for bioproduction. This review describes the latest developments for metabolic control, and focuses on the trends and challenges of metabolic engineering strategies.

Precursor Quantitation Methods for Next Generation Food Production

Food is essential for human survival. Nowadays, traditional agriculture faces challenges in balancing the need of sustainable environmental development and the rising food demand caused by an increasing population. In addition, in the emerging of consumers' awareness of health related issues bring a growing trend towards novel nature-based food additives. Synthetic biology, using engineered microbial cell factories for production of various molecules, shows great advantages for generating food alternatives and additives, which not only relieve the pressure laid on tradition agriculture, but also create a new stage in healthy and sustainable food supplement. The biosynthesis of food components (protein, fats, carbohydrates or vitamins) in engineered microbial cells often involves cellular central metabolic pathways, where common precursors are processed into different proteins and products. Quantitation of the precursors provides information of the metabolic flux and intracellular metabolic state, giving guidance for precise pathway engineering. In this review, we summarized the quantitation methods for most cellular biosynthetic precursors, including energy molecules and co-factors involved in redox-reactions. It will also be useful for studies worked on pathway engineering of other microbial-derived metabolites. Finally, advantages and limitations of each method are discussed.

Refactoring transcription factors for metabolic engineering

Due to the ability to regulate target metabolic pathways globally and dynamically, metabolic regulation systems composed of transcription factors have been widely used in metabolic engineering and synthetic biology. This review introduced the categories, action principles, prediction strategies, and related databases of transcription factors. Then, the application of global transcription machinery engineering technology and the transcription factor-based biosensors and quorum sensing systems are overviewed. In addition, strategies for optimizing the transcriptional regulatory tools' performance by refactoring transcription factors are summarized. Finally, the current limitations and prospects of constructing various regulatory tools based on transcription factors are discussed. This review will provide theoretical guidance for the rational design and construction of transcription factor-based metabolic regulation systems.

Production of Vitamin K by Wild-Type and Engineered Microorganisms

Vitamin K is a fat-soluble vitamin that mainly exists as phylloquinone or menaquinone in nature. Vitamin K plays an important role in blood clotting and bone health in humans. For use as a nutraceutical, vitamin K is produced by natural extraction, chemical synthesis, and microbial fermentation. Natural extraction and chemical synthesis methods for vitamin K production have limitations, such as low yield of products and environmental concerns. Microbial fermentation is a more sustainable process for industrial production of natural vitamin K than two other methods. Recent advanced genetic technology facilitates industrial production of vitamin K by increasing the yield and productivity of microbial host strains. This review covers (i) general information about vitamin K and microbial host, (ii) current titers of vitamin K produced by wild-type microorganisms, and (iii) vitamin K production by engineered microorganisms, including the details of strain engineering strategies. Finally, current limitations and future directions for microbial production of vitamin K are also discussed.

Synthetic biology: a new frontier in food production

Concerns regarding food security arise from population growth, global warming, and reduction in arable land. With advances in synthetic biology, food production by microbes is considered to be a promising alternative that would allow rapid food production in an environmentally friendly manner. Moreover, synthetic biology can be adopted to the production of healthier or specifically designed food ingredients (e.g., high-value proteins, lipids, and vitamins) and broaden the utilization of feedstocks (e.g., methanol and CO₂), thereby offering potential solutions to high-quality food and the greenhouse effect. We first present how synthetic biology can facilitate the microbial production of various food components, and then discuss feedstock availability enabled by synthetic biology. Finally, we illustrate trends and key challenges in synthetic biology-driven food production.

Toward improved terpenoids biosynthesis: strategies to enhance the capabilities of cell factories

Terpenoids form the most diversified class of natural products, which have gained application in the pharmaceutical, food, transportation, and fine and bulk chemical industries. Extraction from naturally occurring sources does not meet industrial demands, whereas chemical synthesis is often associated with poor enantio-selectivity, harsh working conditions, and environmental pollutions. Microbial cell factories come as a suitable replacement. However, designing efficient microbial platforms for isoprenoid synthesis is often a challenging task. This has to do with the cytotoxic effects of pathway intermediates and some end products, instability of expressed pathways, as well as high enzyme promiscuity. Also, the low enzymatic activity of some terpene synthases and prenyltransferases, and the lack of an efficient throughput system to screen improved high-performing strains are bottlenecks in strain development. Metabolic engineering and synthetic biology seek to overcome these issues through the provision of effective synthetic tools. This review sought to provide an in-depth description of novel strategies for improving cell factory performance. We focused on improving transcriptional and translational efficiencies through static and dynamic regulatory elements, enzyme engineering and high-throughput screening strategies, cellular function enhancement through chromosomal integration, metabolite tolerance, and modularization of pathways.

Synthetic Biology Toolkits and Metabolic Engineering Applied in Corynebacterium glutamicum for Biomanufacturing

Corynebacterium glutamicum is an important workhorse in industrial white biotechnology. It has been widely applied in the producing processes of amino acids, fuels, and diverse value-added chemicals. With the continuous disclosure of genetic regulation mechanisms, various strategies and technologies of synthetic biology were used to design and construct C. glutamicum cells for biomanufacturing and bioremediation. This study mainly aimed to summarize the design and construction strategies of C. glutamicum-engineered strains, which were based on genomic modification, synthetic biological device-assisted metabolic flux optimization, and directed evolution-based engineering. Then, taking two important bioproducts (N-acetylglucosamine and hyaluronic acid) as examples, the applications of C. glutamicum cell factories were introduced. Finally, we discussed the current challenges and future development trends of C. glutamicum-engineered strain construction.

Efficient, Flexible Autoinduction Expression Systems with Broad Initiation in Bacillus subtilis

Low expression levels and inflexible induction initiation have been the main obstacles to produce proteins using bacterial quorum sensing (QS). The typical QS system in Bacillus subtilis, ComQXPA, activates the promoter P_srfA using ComX and ComA as an auto-inducer and a promoter activator, respectively. Here, we developed a series of flexible autoinduction expression systems in B. subtilis WB600 based on ComQXPA using a super-folder green fluorescent protein as the reporter. The -35 region of P_srfA was replaced with corresponding conserved sequences of σA-dependent promoters, yielding P₁ with 85% enhanced strength. We then applied a semi-rational design within the spacer between the -35 and -15 regions of P₁ to generate the QS promoter P_S1E, which generated 8.22-fold more expression than P_srfA. Based on P_S1E, we finally obtained three types of autoinduction expression systems with initiation ranging from 1.5-9.5 h by optimizing the combination of the promoters for ComX and ComA. The yield of Bacillus deramificans pullulanase generated using autoinduction expression systems in B. subtilis reached 80.2 U/mL, which was 36% more than that of the most powerful constitutive promoter P₅₆₆. Flexible autoinduction expression systems with diverse dynamic features have considerable potential for improving protein expression and metabolite production in B. subtilis.

Advances in Enhanced Menaquinone-7 Production From Bacillus subtilis

The production of nutraceutical compounds through biosynthetic approaches has received considerable attention in recent years. For example, Menaquinone-7 (MK-7), a sub-type of Vitamin K2, biosynthesized from Bacillus subtilis (B. subtilis), proved to be more efficiently produced than the conventional chemical synthesis techniques. This is possible due to the development of B. subtilis as a chassis cell during the biosynthesis stages. Hence, it is imperative to provide insights on the B. subtilis membrane permeability modifications, biofilm reactors, and fermentation optimization as advanced techniques relevant to MK-7 production. Although the traditional gene-editing method of homologous recombination improves the biosynthetic pathway, CRISPR-Cas9 could potentially resolve the drawbacks of traditional genome editing techniques. For these reasons, future studies should explore the applications of CRISPRi (CRISPR interference) and CRISPRa (CRISPR activation) system gene-editing tools in the MK-7 anabolism pathway.

Multilayer Genetic Circuits for Dynamic Regulation of Metabolic Pathways

The dynamic regulation of metabolic pathways is based on changes in external signals and endogenous changes in gene expression levels and has extensive applications in the field of synthetic biology and metabolic engineering. However, achieving dynamic control is not trivial, and dynamic control is difficult to obtain using simple, single-level, control strategies because they are often affected by native regulatory networks. Therefore, synthetic biologists usually apply the concept of logic gates to build more complex and multilayer genetic circuits that can process various signals and direct the metabolic flux toward the synthesis of the molecules of interest. In this review, we first summarize the applications of dynamic regulatory systems and genetic circuits and then discuss how to design multilayer genetic circuits to achieve the optimal control of metabolic fluxes in living cells.

Metabolic engineering for the synthesis of steviol glycosides: current status and future prospects

With the pursuit of natural non-calorie sweeteners, steviol glycosides (SGs) have become one of the most popular natural sweeteners in the market. The SGs in Stevia are a mixture of SGs synthesized from steviol (a terpenoid). SGs are diterpenoids. Different SGs depend on the number and position of sugar groups on the core steviol backbone. This diversity comes from the processing of glycoside steviol by various glycosyltransferases. Due to the differences in glycosylation, each SG has unique sensory properties. At present, it is more complicated to extract high-quality SGs from plants, so the excavation of the metabolic pathways of engineered microorganisms to synthesize SGs has been extensively studied. Specifically, the expression of different glycosyltransferases in microbes is key to the synthesis of various SGs by engineered microorganisms. To trigger more researches on the functional characterization of the enzymes encoded by these genes, this review describes the latest research progresses of the related enzymes involved in SG biosynthesis and metabolic engineering.Key points• Outlines the research progress of key enzymes in the biosynthetic pathway of SGs• Factors affecting the catalytic capacity of stevia glucosyltransferase• Provide guidance for the efficient synthesis of SGs in microbial cell factories.

Design and construction of novel biocatalyst for bioprocessing: Recent advances and future outlook

Bioprocess, a biocatalysis-based technology, is becoming popular in many research fields and widely applied in industrial manufacturing. However, low bioconversion, low productivity, and high costs during industrial processes are usually the limitation in bioprocess. Therefore, many biocatalyst strategies have been developed to meet these challenges in recent years. In this review, we firstly discuss protein engineering strategies, which are emerged for improving the biocatalysis activity of biocatalysts. Then, we summarize metabolic engineering strategies that are promoting the development of microbial cell factories. Next, we illustrate the necessity of using the combining strategy of protein engineering and metabolic engineering for efficient biocatalysts. Lastly, future perspectives about the development and application of novel biocatalyst strategies are discussed. This review provides theoretical guidance for the development of efficient, sustainable, and economical bioprocesses mediated by novel biocatalysts.

Microbial Cell Factories for Green Production of Vitamins

Vitamins are a group of essential nutrients that are necessary to maintain normal metabolic activities and optimal health. There are wide applications of different vitamins in food, cosmetics, feed, medicine, and other areas. The increase in the global demand for vitamins has inspired great interest in novel production strategies. Chemical synthesis methods often require high temperatures or pressurized reactors and use non-renewable chemicals or toxic solvents that cause product safety concerns, pollution, and hazardous waste. Microbial cell factories for the production of vitamins are green and sustainable from both environmental and economic standpoints. In this review, we summarized the vitamins which can potentially be produced using microbial cell factories or are already being produced in commercial fermentation processes. They include water-soluble vitamins (vitamin B complex and vitamin C) as well as fat-soluble vitamins (vitamin A/D/E and vitamin K). Furthermore, metabolic engineering is discussed to provide a reference for the construction of microbial cell factories. We also highlight the current state and problems encountered in the fermentative production of vitamins.

Surfactin, a quorum sensing signal molecule, globally affects the carbon metabolism in Bacillus amyloliquefaciens

Surfactin, a quorum sensing signal molecule, is correlated with carbon metabolism in Bacillus amyloliquefaciens. In the present work, we found that mutation of srfA (ΔsrfA) led to an obviously changed carbon metabolism in B. amyloliquefaciens. Firstly, the PTS-glucose system was significantly increased as a feedback to glucose exhaustion. Secondly, the basic carbon metabolism such as glycolysis and TCA cycle was obviously weakened in ΔsrfA. Thirdly, the global regulator of CcpA (carbon catabolite protein A) and P ~ Ser₄₆-HPr (seryl-phosphorylated form of histidine-containing protein) to mediate the CcpA-dependent CCR (carbon catabolite repression) were not increased, but the ability to use extracellular non- and less-preferred carbon sources was down-regulated in ΔsrfA. Fourthly, the carbon overflow metabolism such as biosynthesis of acetate was enhanced while biosynthesis of acetoin/2,3-butanediol and branched-chain amino acids were weakened in ΔsrfA. Finally, ΔsrfA could use most of non- and less-preferred carbon sources except for fatty acids, branched chain amino acids, and some organic acids (e.g. pyruvate, citrate and glutamate) after glucose exhaustion. Collectively, surfactin showed a global influence on carbon metabolism in B. amyloliquefaciens. Our studies highlighted a way to correlate quorum sensing with carbon metabolism via surfactin in Bacillus species.

•

The quorum sensing molecule of surfactin globally influenced the carbon metabolism in B. amyloliquefaciens.

•

The studies highlighted a way to correlate quorum sensing with carbon metabolism via surfactin in Bacillus species.

•

Glycolysis and TCA cycle was obviously weakened after biosynthesis of surfactin was disrupted.

•

The CcpA-dependent carbon catabolite repression was not enhanced after disruption of surfactin biosynthesis.

•

The ability to use non-preferred carbon sources was down-regulated after disruption of surfactin biosynthesis.

Site-directed mutagenesis of the quorum-sensing transcriptional regulator SinR affects the biosynthesis of menaquinone in Bacillus subtilis

Background

Menaquinone (MK-7) is a highly valuable vitamin K₂ produced by Bacillus subtilis. Common static metabolic engineering approaches for promoting the production of MK-7 have been studied previously. However, these approaches caused an accumulation of toxic substances and reduced product yield. Hence, dynamic regulation by the quorum sensing (QS) system is a promising method for achieving a balance between product synthesis and cell growth.

Results

In this study, the QS transcriptional regulator SinR, which plays a significant role in biofilm formation and MK production simultaneously, was selected, and its site-directed mutants were constructed. Among these mutants, sinR knock out strain (KO-SinR) increased the biofilm biomass by 2.8-fold compared to the wild-type. SinR^quad maximized the yield of MK-7 (102.56 ± 2.84 mg/L). To decipher the mechanism of how this mutant regulates MK-7 synthesis and to find additional potential regulators that enhance MK-7 synthesis, RNA-seq was used to analyze expression changes in the QS system, biofilm formation, and MK-7 synthesis pathway. The results showed that the expressions of tapA, tasA and epsE were up-regulated 9.79-, 0.95-, and 4.42-fold, respectively. Therefore, SinR^quad formed more wrinkly and smoother biofilms than BS168. The upregulated expressions of glpF, glpk, and glpD in this biofilm morphology facilitated the flow of glycerol through the biofilm. In addition, NADH dehydrogenases especially sdhA, sdhB, sdhC and glpD, increased 1.01-, 3.93-, 1.87-, and 1.11-fold, respectively. The increased expression levels of NADH dehydrogenases indicated that more electrons were produced for the electron transport system. Electrical hyperpolarization stimulated the synthesis of the electron transport chain components, such as cytochrome c and MK, to ensure the efficiency of electron transfer. Wrinkly and smooth biofilms formed a network of interconnected channels with a low resistance to liquid flow, which was beneficial for the uptake of glycerol, and facilitated the metabolic flux of four modules of the MK-7 synthesis pathway.

Conclusions

In this study, we report for the first time that SinR^quad has significant effects on MK-7 synthesis by forming wrinkly and smooth biofilms, upregulating the expression level of most NADH dehydrogenases, and providing higher membrane potential to stimulate the accumulation of the components in the electron transport system.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01603-5.

Production of proteins and commodity chemicals using engineered Bacillus subtilis platform strain

Currently, increasing demand of biochemicals produced from renewable resources has motivated researchers to seek microbial production strategies instead of traditional chemical methods. As a microbial platform, Bacillus subtilis possesses many advantages including the generally recognized safe status, clear metabolic networks, short growth cycle, mature genetic editing methods and efficient protein secretion systems. Engineered B. subtilis strains are being increasingly used in laboratory research and in industry for the production of valuable proteins and other chemicals. In this review, we first describe the recent advances of bioinformatics strategies during the research and applications of B. subtilis. Secondly, the applications of B. subtilis in enzymes and recombinant proteins production are summarized. Further, the recent progress in employing metabolic engineering and synthetic biology strategies in B. subtilis platform strain to produce commodity chemicals is systematically introduced and compared. Finally, the major limitations for the further development of B. subtilis platform strain and possible future directions for its research are also discussed.

Genetic transformation system for Bacillus velezensis NSZ-YBGJ001 and curing of the endogenous plasmid pBV01

OBJECTIVES

To construct a genetic transformation system for Bacillus velezensis NSZ-YBGJ001 and identify the origin element in an endogenous plasmidpBV01 for curing pBV01 by plasmid incompatibility.

RESULTS

A plasmid pUBC01 was constructed, and then an electrotransformation system for B. velezensis NSZ-YBGJ001 was developed, which reached ~ 1000 transformants per microgram of pUBC01 DNA. Additionally, a 7276-bp circular plasmid pBV01 with a G + C content of 37.5% was isolated from B. velezensis NSZ-YBGJ001 and analyzed via sequence analysis. To cure pBV01, an incompatible plasmid pBV02 harboring the replication element of pBV01 was developed and functionally replicated in both Bacillus subtilis WB600 and B. velezensis NSZ-YBGJ001. pBV01 was cured through introduction of pBV02 into B. velezensis NSZ-YBGJ001 after serial subculturing for approximately 40 generations. Finally, another plasmid, pBV03, was constructed based on pBV-ori, and exogenous genes in pBV03 could be efficiently expressed in B. subtilis.

CONCLUSIONS

The results of this study, including the genetic transformation system, plasmid-curing strategy, and exogenous gene expression, will support genetic manipulation of B. velezensis to promote its application in biocontrol and industry.

Engineering of Multiple Modules to Improve Amorphadiene Production in Bacillus subtilis Using CRISPR-Cas9

Engineering strategies to improve terpenoids' production in Bacillus subtilis mainly focus on 2C-methyl-d-erythritol-4-phosphate (MEP) pathway overexpression. To systematically engineer the chassis strain for higher amorphadiene (precursor of artemisinin) production, a clustered regularly interspaced short palindromic repeat-Cas9 (CRISPR-Cas9) system was established in B. subtilis to facilitate precise and efficient genome editing. Then, this system was employed to engineer three more modules to improve amorphadiene production, including the terpene synthase module, the branch pathway module, and the central metabolic pathway module. Finally, our combination of all of the useful strategies within one strain significantly increased extracellular amorphadiene production from 81 to 116 mg/L after 48 h flask fermentation without medium optimization. For the first time, we attenuated the FPP-derived competing pathway to improve amorphadiene biosynthesis and investigated how the TCA cycle affects amorphadiene production in B. subtilis. Overall, this study provides a universal strategy for further increasing terpenoids' production in B. subtilis by comprehensive and systematic metabolic engineering.

Highly Efficient Production of Menaquinone-7 from Glucose by Metabolically Engineered Escherichia coli

Menaquinone-7 (MK-7) possesses wide health and medical value, and the market demand for MK-7 has increased. Metabolic engineering for MK-7 production in Escherichia coli still remains challenging due to the characteristics of the competing quinone synthesis, and cells mainly synthesized menaquinones under anaerobic conditions. To increase the production of MK-7 in engineered E. coli strains under aerobic conditions, we divided the whole MK-7 biosynthetic pathway into three modules (MVA pathway, DHNA pathway, and MK-7 pathway) and systematically optimized each of them. First, by screening and enhancing Idi expression, the amounts of MK-7/DMK-7 increased significantly. Then, in the MK-7 pathway, by combinatorial overexpression of endogenous MenA and exogenous UbiE, and fine-tuning the expression of HepPPS, MenA, and UbiE, 70 μM MK-7 was achieved. Third, the DHNA synthetic pathway was enhanced, and 157 μM MK-7 was achieved. By the combinational metabolic engineering strategies and membrane engineering, an efficient metabolic engineered E. coli strain for MK-7 synthesis was developed, and 200 μM (129 mg/L) MK-7 was obtained in shake flask experiment, representing a 306-fold increase compared to the starting strain. In the scale-up fermentation, 2074 μM (1350 mg/L) MK-7 was achieved after 52 h fermentation with a productivity of 26 mg/L/h. This is the highest titer of MK-7 ever reported. This study offers an alternative method for MK-7 production from biorenewable feedstock (glucose) by engineered E. coli. The high titer of our process should make it a promising cost-effective resource for MK-7.