Peptides modeled on the transmembrane region of the slow voltage-gated IsK potassium channel: structural characterization of peptide assemblies in the beta-strand conformation

Studying Lipid-Protein Interactions with Electron Paramagnetic Resonance Spectroscopy of Spin-Labeled Lipids

Spin label electron paramagnetic resonance (EPR) of lipid-protein interactions reveals crucial features of the structure and assembly of integral membrane proteins. Spin-label EPR spectroscopy is the technique of choice to characterize the protein solvating lipid shell in its highly dynamic nature, because the EPR spectra of lipids that are spin-labeled close to the terminal methyl end of their acyl chains display two spectral components, those corresponding to lipids directly contacting the protein and those corresponding to lipids in the bulk fluid bilayer regions of the membrane. In this chapter, typical spin label EPR procedures are presented that allow determination of the stoichiometry of interaction of spin-labeled lipids with the intramembranous region of membrane proteins or polypeptides, as well as the association constant of the spin-labeled lipid with respect to the host lipid. The lipids giving rise to a so-called immobile spectral component in the EPR spectrum of such samples are identified as the motionally restricted first-shell lipids solvating membrane proteins in biomembranes. Stoichiometry and selectivity are directly related to the structure of the intramembranous sections of membrane-associated proteins or polypeptides and can be used to study the state of assembly of such proteins in the membrane. Since these characteristics of lipid-protein interactions are discussed in detail in the literature (see ref. Marsh, Eur Biophys J 39:513-525, 2010 for a recent review), here we focus more on how to spin label model membranes and biomembranes and how to measure and analyze the two-component EPR spectra of spin-labeled lipids in phospholipid bilayers that contain proteins or polypeptides. After a description of how to prepare spin-labeled model and native biological membranes, we present the reader with computational procedures for determining the molar fraction of motionally restricted lipids when both, one or none of the pure isolated-mobile or immobile-spectral components are available. With these topics, this chapter complements a previous methodological paper (Marsh, Methods 46:83-96, 2008). The interpretation of the data is discussed briefly, as well as other relevant and recent spin label EPR techniques for studying lipid-protein interactions, not only from the point of view of lipid chain dynamics.

Progress Toward the Clinical Translation of Bioinspired Peptide and Protein Assemblies

Supramolecular materials composed of proteins and peptides have been receiving considerable attention toward a range of diseases and conditions from vaccines to drug delivery. Owing to the relative newness of this class of materials, the bulk of work to date has been preclinical. However, examples of approved treatments particularly in vaccines, dentistry, and hemostasis demonstrate the translational potential of supramolecular polypeptides. Critical milestones in the clinical development of this class of materials and currently approved supramolecular polypeptide therapies are described in this study. Additional examples of not-yet-approved materials that are steadily advancing toward clinical use are also featured. Spherical assemblies such as virus-like particles, designed protein nanoparticles, and spherical peptide amphiphiles are highlighted, followed by fiber-forming systems such as fibrillizing peptides, fiber-forming peptide-amphiphiles, and filamentous bacteriophages.

Studying lipid-protein interactions with electron paramagnetic resonance spectroscopy of spin-labeled lipids

Spin label electron paramagnetic resonance (EPR) of lipid-protein interactions reveals crucial features of the structure and assembly of integral membrane proteins. Spin label EPR spectroscopy is the technique of choice to characterize the protein-solvating lipid shell in its highly dynamic nature, because the EPR spectra of lipids that are spin labeled close to the terminal methyl end of their acyl chains display two spectral components, those corresponding to lipids directly contacting the protein and those corresponding to lipids in the bulk fluid bilayer regions of the membrane. In this chapter, typical spin label EPR procedures are presented that allow determination of the stoichiometry of interaction of spin-labeled lipids with the intra-membranous region of membrane proteins or polypeptides, as well as the association constant of the spin-labeled lipid with respect to the host lipid. The lipids giving rise to the so-called immobile spectral component in the EPR spectrum of such samples are identified as the motionally restricted first-shell lipids solvating membrane proteins in biomembranes. Stoichiometry and selectivity are directly related to the structure of the intra-membranous sections of membrane-associated proteins or polypeptides and can be used to study the state of assembly of such proteins in the membrane. Since these characteristics of lipid-protein interactions are discussed in detail in the literature [see Marsh (Eur Biophys J 39:513-525, 2010) for a most recent review], here we focus more on how to spin label model and biomembranes and how to measure and analyze the two-component EPR spectra of spin-labeled lipids in phospholipid bilayers that contain proteins or polypeptides. After a description of how to prepare spin-labeled model and native biological membranes, we present the reader with computational procedures for determining the molar fraction of motionally restricted lipids when both, one, or none of the pure isolated-mobile or immobile-spectral components are available. With these topics, this chapter complements a recent methodological paper [Marsh (Methods 46:83-96, 2008)]. The interpretation of the data is discussed briefly, as well as other relevant and recent spin label EPR techniques for studying lipid-protein interactions, not only from the point of view of lipid chain dynamics.

Structure of KCNE1 and implications for how it modulates the KCNQ1 potassium channel

KCNE1 is a single-span membrane protein that modulates the voltage-gated potassium channel KCNQ1 (K V7.1) by slowing activation and enhancing channel conductance to generate the slow delayed rectifier current ( I Ks) that is critical for the repolarization phase of the cardiac action potential. Perturbation of channel function by inherited mutations in KCNE1 or KCNQ1 results in increased susceptibility to cardiac arrhythmias and sudden death with or without accompanying deafness. Here, we present the three-dimensional structure of KCNE1. The transmembrane domain (TMD) of KCNE1 is a curved alpha-helix and is flanked by intra- and extracellular domains comprised of alpha-helices joined by flexible linkers. Experimentally restrained docking of the KCNE1 TMD to a closed state model of KCNQ1 suggests that KCNE1 slows channel activation by sitting on and restricting the movement of the S4-S5 linker that connects the voltage sensor to the pore domain. We postulate that this is an adhesive interaction that must be disrupted before the channel can be opened in response to membrane depolarization. Docking to open KCNQ1 indicates that the extracellular end of the KCNE1 TMD forms an interface with an intersubunit cleft in the channel that is associated with most known gain-of-function disease mutations. Binding of KCNE1 to this "gain-of-function cleft" may explain how it increases conductance and stabilizes the open state. These working models for the KCNE1-KCNQ1 complexes may be used to formulate testable hypotheses for the molecular bases of disease phenotypes associated with the dozens of known inherited mutations in KCNE1 and KCNQ1.

Self-assembling Peptides: From Bio-inspired Materials to Bone Regeneration

In recent years, the development of new biomaterials with specifications for tissue and organ functional requirements—such as proper biological, structural, and biomechanical properties as well as designed control for biodegradation and therapeutic drug-release capacity—is the main aim of many academic and industrial programs. Hence, the concept of molecular self-assembly is the driving force for the development of new biomaterials that support the growth and functional differentiation of cells and tissues in a controlled manner. The discovery, properties, and development of self-assembling peptides to be used as three-dimensional (3D) scaffolds based on their similarity (in structure and mechanical features) to extracellular matrices are described. Self-assembling peptides can be used for in vitro applications for cell 3D culture as well as in vivo for tissue regeneration such as bone and optical nerve repair, as well as for drug delivery of mediators to improve therapy, as in the case of myocardial infarction. Finally, the use of self-assembling materials in combination with a bioengineering platform is proposed to assist functional bone regeneration in cases of larger bone defects, including exposed fractures due to trauma and spinal disorders dealing with high loadings, as well as replacement of big bone structures due to tumors.

Preparation, functional characterization, and NMR studies of human KCNE1, a voltage-gated potassium channel accessory subunit associated with deafness and long QT syndrome

KCNE1, also known as minK, is a member of the KCNE family of membrane proteins that modulate the function of KCNQ1 and certain other voltage-gated potassium channels (KV). Mutations in human KCNE1 cause congenital deafness and congenital long QT syndrome, an inherited predisposition to potentially life-threatening cardiac arrhythmias. Although its modulation of KCNQ1 function has been extensively characterized, many questions remain regarding KCNE1's structure and location within the channel complex. In this study, KCNE1 was overexpressed in Escherichia coli and purified. Micellar solutions of the protein were then microinjected into Xenopus oocytes expressing KCNQ1 channels, followed by electrophysiological recordings aimed at testing whether recombinant KCNE1 can co-assemble with the channel. Nativelike modulation of channel properties was observed following injection of KCNE1 in lyso-myristoylphosphatidylglycerol (LMPG) micelles, indicating that KCNE1 is not irreversibly misfolded and that LMPG is able to act as a vehicle for delivering membrane proteins into the membranes of viable cells. 1H-15N TROSY NMR experiments indicated that LMPG micelles are well-suited for structural studies of KCNE1, leading to assignment of its backbone resonances and to relaxation studies. The chemical shift data confirmed that KCNE1's secondary structure includes several alpha-helices and demonstrated that its distal C-terminus is disordered. Surprisingly, for KCNE1 in LMPG micelles, there appears to be a break in alpha-helicity at sites 59-61, near the middle of the transmembrane segment, a feature that is accompanied by increased local backbone mobility. Given that this segment overlaps with sites 57-59, which are known to play a critical role in modulating KCNQ1 channel activation kinetics, this unusual structural feature likely has considerable functional relevance.

Reconstitution of holin activity with a synthetic peptide containing the 1-32 sequence region of EJh, the EJ-1 phage holin

Pneumococcal EJ-1 phage holin (EJh) is a hydrophobic polypeptide of 85 amino acid residues displaying lethal inner membrane disruption activity. To get an insight into holin structure and function, several peptides representing the different topological regions predicted by sequence analysis have been synthesized. Peptides were structurally characterized in both aqueous buffer and membrane environments, and their potential to induce membrane perturbation was determined. Among them, only the N-terminal predicted transmembrane helix increased the membrane permeability. This segment, only when flanked by the positive charged residues on its N-terminal side, which are present in the sequence of the full-length protein, folds into a major alpha-helix structure with a transmembrane preferential orientation. Fluorescein quenching experiments of N-terminal-labeled peptide evidenced the formation of oligomers of variable size depending on the peptideto-lipid molar ratio. The self-assembling tendency correlated with the formation of transmembrane pores that permit the release of encapsulated dextrans of various sizes. When analyzed by atomic force microscopy, peptide-induced membrane lesions are visualized as transbilayer holes. These findings are the first evidence for a lytic domain in holins and for the nature of membrane lesions caused by them.

Analysis of the C-terminal membrane anchor domains of hepatitis C virus glycoproteins E1 and E2: toward a topological model

The hepatitis C virus (HCV) glycoproteins E1 and E2 should be anchored in the viral membrane by their C-terminal domains. During synthesis, they are translocated to the endoplasmic reticulum (ER) lumen where they remain. The 31 C-terminal residues of the E1 protein and the 29 C-terminal residues of the E2 protein are implicated in the ER retention. Moreover, the E1 and E2 C termini are implicated in E1-E2 heterodimerization. We studied the E1 and E2 C-terminal sequences of 25 HCV strains in silico using molecular modeling techniques. We conclude that both C-terminal domains should adopt a similar and peculiar configuration: one amphipathic alpha-helix followed by a pair of transmembrane beta-strands. Several three-dimensional (3-D) models were generated. After energy minimization, their ability to interact with membranes was studied using the molecular hydrophobicity potentials calculation and the IMPALA procedure. The latter simulates interactions with a membrane by a Monte Carlo minimization of energy. These methods suggest that the beta-hairpins could anchor the glycoproteins in the ER membrane at least transiently. Anchoring could be stabilized by the adsorption of the nearby amphipathic alpha-helices at the membrane surface. The 3-D models correlate with experimental results which indicate that the E1-E2 transmembrane domains are involved in the heterodimerization and have ER retention properties.

Molecular design and synthesis of artificial ion channels based on cyclic peptides containing unnatural amino acids

A series of novel cyclic peptides composed of 3 to 5 dipeptide units with alternating natural-unnatural amino acid units, have been designed and synthesized, employing 5-(N-alkanoylamino)-3-aminobenzoic acid with a long alkanoyl chain as the unnatural amino acid. All cyclic peptides with systematically varying pore size, shape, and lipophilicity are found to form ion channels with a conductance of ca. 9 pS in aqueous KCl (500 mM) upon examination by the voltage clamp method. These peptide channels are cation selective with the permeability ratio P(Cl(-))/P(K(+)) of around 0.17. The ion channels formed by the neutral, cationic, and anionic cyclic peptides containing L-alanine, L-lysine, and L-aspartate, respectively, show the monovalent cation selectivity with the permeability ratio P(Na(+))/P(K(+)) of ca. 0.39. On the basis of structural information provided by voltage-dependent blockade of the single channel current of all the tested peptides by Ca(2+), we inferred that each channel is formed from a dimer of the peptide with its peptide ring constructing the channel entrance and its alkanoyl chains lining across the membrane to build up the channel pore. The experimental results are consistent with an idea that the rate of ion conduction is determined by the nature of the hydrophobic alkanoyl chain region, which is common to all the channels.

Structure, dynamics and composition of the lipid-protein interface. Perspectives from spin-labelling

Implications of the data on lipid-protein interactions involving integral proteins that are obtained from EPR spectroscopy with spin-labelled lipids in membranes are reviewed. The lipid stoichiometry, selectivity and exchange dynamics at the lipid-protein interface can be determined, in addition to information on the configuration and rotational dynamics of the protein-associated lipid chains. These parameters, particularly the stoichiometry and selectivity, are directly related to the intramembranous structure and degree of oligomerisation of the integral protein, and conversely may be used to study the state of assembly of such proteins in the membrane. Insertion of proteins into membranes can be studied by analogous methods. Comparison with the results obtained from integral proteins helps to define the extent of membrane penetration and degree of transmembrane crossing that are relevant to protein translocation mechanisms.

Folding of beta-sheet membrane proteins: a hydrophobic hexapeptide model

Beta-sheets, in the form of the beta-barrel folding motif, are found in several constitutive membrane proteins (porins) and in several microbial toxins that assemble on membranes to form oligomeric transmembrane channels. We report here a first step towards understanding the principles of beta-sheet formation in membranes. In particular, we describe the properties of a simple hydrophobic hexapeptide, acetyl-Trp-Leu5 (AcWL5), that assembles cooperatively into beta-sheet aggregates upon partitioning into lipid bilayer membranes from the aqueous phase where the peptide is strictly monomeric and random coil. The aggregates, containing 10 to 20 monomers, undergo a relatively sharp and reversible thermal unfolding at approximately 60 degreesC. No pores are formed by the aggregates, but they do induce graded leakage of vesicle contents at very high peptide to lipid ratios. Because beta-sheet structure is not observed when the peptide is dissolved in n-octanol, trifluoroethanol or sodium dodecyl sulfate micelles, aggregation into beta-sheets appears to be an exclusive property of the peptide in the bilayer membrane interface. This is an expected consequence of the hypothesis that a reduction in the free energy of partitioning of peptide bonds caused by hydrogen bonding drives secondary structure formation in membrane interfaces. But, other features of interfacial partitioning, such as side-chain interactions and reduction of dimensionality, must also contribute. We estimate from our partitioning data that the free energy reduction per residue for aggregation is about 0.5 kcal mol-1. Although modest, its aggregate effect on the free energy of assembling beta-sheet proteins can be huge. This surprising finding, that a simple hydrophobic hexapeptide readily assembles into oligomeric beta-sheets in membranes, reveals the potent ability of membranes to promote secondary structure in peptides, and shows that the formation of beta-sheets in membranes is more facile than expected. Furthermore, it provides a basis for understanding the observation that membranes promote self-association of beta-amyloid peptides. AcWL5 and related peptides thus provide a good starting point for designing peptide models for exploring the principles of beta-sheet formation in membranes.

A single-residue deletion alters the lipid selectivity of a K+ channel-associated peptide in the beta-conformation: spin label electron spin resonance studies

Lipid-peptide interactions with the 27-residue peptide of sequence KLEALYILMVLGFFGFFTLGIMLSYIR reconstituted as beta-sheet assemblies in dimyristoylphosphatidylcholine bilayers have been studied by electron spin resonance (ESR) spectroscopy with spin-labeled lipids. The peptide corresponds to residues 42-68 of the IsK voltage-gated K+ channel protein and contains the single putative transmembrane span of this protein. Lipid-peptide interactions give rise to a second component in the ESR spectra of lipids spin-labeled on the 14C atom of the chain that corresponds to restriction of the lipid mobility by direct interaction with the peptide assemblies. From the dependence on the lipid/peptide ratio, the stoichiometry of lipid interaction is found to be about two phospholipids/peptide monomer. The sequence of selectivity for lipid association with the peptide assemblies is in the order phosphatidic acid > stearic acid = phosphatidylserine > phosphatidylglycerol = phosphatidylcholine. Comparison with previous data for a corresponding 26-residue mutant peptide with a single deletion of the apolar residue Leu2 (Horvath et al., 1995. Biochemistry 34:3893-3898), indicates a very similar mode of membrane incorporation for native and mutant peptides, but a strongly modified pattern and degree of specificity for the interaction with negatively charged lipids. The latter is interpreted in terms of the relative orientations of the charged amino acid side chains in the beta-sheet assemblies of the native and deletion-mutant peptides.

Dichroic ratios in polarized Fourier transform infrared for nonaxial symmetry of beta-sheet structures

The transition moments for the amide bands from beta-sheet peptide structures generally do not exhibit axial symmetry about the director in linearly polarized Fourier transform infrared (FTIR) measurements on oriented systems. The angular dependences of the dichroic ratios of the amide bands are derived for beta-sheet structures in attenuated total reflection (ATR) and polarized transmission experiments on samples that are oriented with respect to the normal to the substrate and are randomly distributed with respect to the azimuthal angle in the plane of the orienting substrate. The orientational distributions of both the beta-strands and the beta-sheets are considered, and explicit expressions are given for the dichroic ratios of the amide I and amide II bands. The dichroic ratio of the amide II band, which is parallel polarized, can yield the orientation of the beta-strands directly, but to specify the orientations of the beta-sheets completely requires measurement of the dichroic ratios of both the amide I and amide II bands, or generally two bands with parallel and perpendicular polarizations. A random distribution in tilt of the planes of the beta-sheets does not give rise to equal dichroic ratios for bands with perpendicular and parallel polarizations, such as the amide I and amide II bands. The results are applied to previous ATR and polarized transmission FTIR measurements on a potassium channel-associated peptide, the Escherichia coli outer membrane protein OmpA, and the E. coli OmpF porin protein in oriented membranes.

Equilibrium and non-equilibrium conformations of peptides in lipid bilayers

A synthetic, hydrophobic, 27-amino-acid-residue peptide 'K27', modelled on the trans-membrane domain of the slow voltage-gated potassium channel, IsK, has been incorporated into a lipid bilayer and its conformational properties studied using FT-IR spectroscopy. The conformation following reconstitution is found to be dependent on the nature of the solvent employed. When the reconstitution is conducted by solvent evaporation from a methanol solution, aggregates comprised of beta-strands are stabilised and their concentration is essentially invariant with time. By contrast, when trifluoroethanol is used, the initial conformation of the peptide is alpha-helical. This then relaxes to an equilibrium state between alpha-helices and beta-strands. The alpha-helix-to beta-strand conversion rate is relatively slow, and this allows the kinetics to be studied by FT-IR spectroscopy. The reverse process is much slower but again can be demonstrated by FT-IR. Thus, it appears that a true equilibrium structure can only be achieved by starting with peptide in the alpha-helical conformation. We believe this result should be of general validity for hydrophobic peptide reconstitution. The implications for conformational changes in membrane proteins are discussed.

Responsive gels formed by the spontaneous self-assembly of peptides into polymeric beta-sheet tapes

Molecular self-assembly is becoming an increasingly popular route to new supramolecular structures and molecular materials. The inspiration for such structures is commonly derived from self-assembling systems in biology. Here we show that a biological motif, the peptide beta-sheet, can be exploited in designed oligopeptides that self-assemble into polymeric tapes and with potentially useful mechanical properties. We describe the construction of oligopeptides, rationally designed or based on segments of native proteins, that aggregate in suitable solvents into long, semi-flexible beta-sheet tapes. These become entangled even at low volume fractions to form gels whose viscoelastic properties can be controlled by chemical (pH) or physical (shear) influences. We suggest that it should be possible to engineer a wide range of properties in these gels by appropriate choice of the peptide primary structure.