Quenching of tryptophan fluorescence by the active-site disulfide bridge in the DsbA protein from Escherichia coli

Glutathione-responsive molecular nanoparticles from a dianionic bolaamphiphile and their use as carriers for targeted delivery

The formation in aqueous media of molecular nanoparticles from a bolaamphiphile (SucIleCsa) incorporating a disulfide moiety is described. The particles can be loaded efficiently with the lipophilic mitochondrial marker DiOC₆(3), quenching its fluorescence, which is recovered upon reductive particle disassembly. DiOC₆(3) transport into human colorectal adenocarcinoma cells (HT-29) is demonstrated using flow cytometry and confocal scanning fluorescence microscopy. A significant increase in intracellular fluorescence is observed when the cells are stimulated to produce glutathione (GSH). These new molecular nanoparticles can be considered a theranostic tool that simultaneously achieves targeted delivery of lipophilic substances and signals high levels of GSH.

The nucleotide binding affinities of two critical conformations of Escherichia coli ATP synthase

ATP synthase is essential in aerobic energy metabolism, and the rotary catalytic mechanism is one of the core concepts to understand the energetic functions of ATP synthase. Disulfide bonds formed by oxidizing a pair of cysteine mutations halted the rotation of the γ subunit in two critical conformations, the ATP-waiting dwell (αE284C/γQ274C) and the catalytic dwell (αE284C/γL276C). Tryptophan fluorescence was used to measure the nucleotide binding affinities for MgATP, MgADP and MgADP-AlF₄ (a transition state analog) to wild-type and mutant F₁ under reducing and oxidizing conditions. In the reduced state, αE284C/γL276C F₁ showed a wild-type-like nucleotide binding pattern; after oxidation to lock the enzyme in the catalytic dwell state, the nucleotide binding parameters remained unchanged. In contrast, αE284C/γQ274C F₁ showed significant differences in the affinities of the oxidized versus the reduced state. Locking the enzyme in the ATP-waiting dwell reduced nucleotide binding affinities of all three catalytic sites. Most importantly, the affinity of the low affinity site was reduced to such an extent that it could no longer be detected in the binding assay (K_d > 5 mM). The results of the present study allow to present a model for the catalytic mechanism of ATP synthase under consideration of the nucleotide affinity changes during a 360° cycle of the rotor.

Solution NMR Structure of Titin N2A Region Ig Domain I83 and Its Interaction with Metal Ions

Titin, the largest single chain protein known so far, has long been known to play a critical role in passive muscle function but recent studies have highlighted titin's role in active muscle function. One of the key elements in this role is the Ca²⁺-dependent interaction between titin's N2A region and the thin filament. An important element in this interaction is I83, the terminal immunoglobulin domain in the N2A region. There is limited structural information about this domain, but experimental evidence suggests that it plays a critical role in the N2A-actin binding interaction. We now report the solution NMR structure of I83 and characterize its dynamics and metal binding properties in detail. Its structure shows interesting relationships to other I-band Ig domains. Metal binding and dynamics data point towards the way the domain is evolutionarily optimized to interact with neighbouring domains. We also identify a calcium binding site on the N-terminal side of I83, which is expected to impact the interdomain interaction with the I82 domain. Together these results provide a first step towards a better understanding of the physiological effects associated with deletion of most of the I83 domain, as occurs in the mdm mouse model, as well as for future investigations of the N2A region.

The Droserasin 1 PSI: A Membrane-Interacting Antimicrobial Peptide from the Carnivorous Plant Drosera capensis

The Droserasins, aspartic proteases from the carnivorous plant Drosera capensis, contain a 100-residue plant-specific insert (PSI) that is post-translationally cleaved and independently acts as an antimicrobial peptide. PSIs are of interest not only for their inhibition of microbial growth, but also because they modify the size of lipid vesicles and strongly interact with biological membranes. PSIs may therefore be useful for modulating lipid systems in NMR studies of membrane proteins. Here we present the expression and biophysical characterization of the Droserasin 1 PSI (D1 PSI.) This peptide is monomeric in solution and maintains its primarily α-helical secondary structure over a wide range of temperatures and pH values, even under conditions where its three disulfide bonds are reduced. Vesicle fusion assays indicate that the D1 PSI strongly interacts with bacterial and fungal lipids at pH 5 and lower, consistent with the physiological pH of D. capensis mucilage. It binds lipids with a variety of head groups, highlighting its versatility as a potential stabilizer for lipid nanodiscs. Solid-state NMR spectra collected at a field strength of 36 T, using a unique series-connected hybrid magnet, indicate that the peptide is folded and strongly bound to the membrane. Molecular dynamics simulations indicate that the peptide is stable as either a monomer or a dimer in a lipid bilayer. Both the monomer and the dimer allow the passage of water through the membrane, albeit at different rates.

Monitoring site-specific conformational changes in real-time reveals a misfolding mechanism of the prion protein

During pathological aggregation, proteins undergo remarkable conformational re-arrangements to anomalously assemble into a heterogeneous collection of misfolded multimers, ranging from soluble oligomers to insoluble amyloid fibrils. Inspired by fluorescence resonance energy transfer (FRET) measurements of protein folding, an experimental strategy to study site-specific misfolding kinetics during aggregation, by effectively suppressing contributions from inter-molecular FRET, is described. Specifically, the kinetics of conformational changes across different secondary and tertiary structural segments of the mouse prion protein (moPrP) were monitored independently, after the monomeric units transformed into large oligomers O_L, which subsequently disaggregated reversibly into small oligomers O_S at pH 4. The sequence segments spanning helices α2 and α3 underwent a compaction during the formation of O_L and elongation into β-sheets during the formation of O_S. The β1-α1-β2 and α2-α3 subdomains were separated, and the helix α1 was unfolded to varying extents in both O_L and O_S.

Production of functional, stable, unmutated recombinant human papillomavirus E6 oncoprotein: implications for HPV-tumor diagnosis and therapy

BACKGROUND

High-risk human papillomaviruses (HR-HPVs) types 16 and 18 are the main etiological agents of cervical cancer, with more than 550,000 new cases each year worldwide. HPVs are also associated with other ano-genital and head-and-neck tumors. The HR-HPV E6 and E7 oncoproteins are responsible for onset and maintenance of the cell transformation state, and they represent appropriate targets for development of diagnostic and therapeutic tools.

METHODS

The unmutated E6 gene from HPV16 and HPV18 and from low-risk HPV11 was cloned in a prokaryotic expression vector for expression of the Histidine-tagged E6 protein (His6-E6), according to a novel procedure. The structural properties were determined using circular dichroism and fluorescence spectroscopy. His6-E6 oncoprotein immunogenicity was assessed in a mouse model, and its functionality was determined using in vitro GST pull-down and protein degradation assays.

RESULTS

The His6-tagged E6 proteins from HPV16, HPV18, and HPV11 E6 genes, without any further modification in the amino-acid sequence, were produced in bacteria as soluble and stable molecules. Structural analyses of HPV16 His6-E6 suggests that it maintains correct folding and conformational properties. C57BL/6 mice immunized with HPV16 His6-E6 developed significant humoral immune responses. The E6 proteins from HPV16, HPV18, and HPV11 were purified according to a new procedure, and investigated for protein-protein interactions. HR-HPV His6-E6 bound p53, the PDZ1 motif from MAGI-1 proteins, the human discs large tumor suppressor, and the human ubiquitin ligase E6-associated protein, thus suggesting that it is biologically active. The purified HR-HPV E6 proteins also targeted the MAGI-3 and p53 proteins for degradation.

CONCLUSIONS

This new procedure generates a stable, unmutated HPV16 E6 protein, which maintains the E6 properties in in vitro binding assays. This will be useful for basic studies, and for development of diagnostic kits and immunotherapies in preclinical mouse models of HPV-related tumorigenesis.

Picosecond fluorescence dynamics of tryptophan and 5-fluorotryptophan in monellin: slow water-protein relaxation unmasked

Time dependent fluorescence Stokes (emission wavelength) shifts (TDFSS) from tryptophan (Trp) following sub-picosecond excitation are increasingly used to investigate protein dynamics, most recently enabling active research interest into water dynamics near the surface of proteins. Unlike many fluorescence probes, both the efficiency and the wavelength of Trp fluorescence in proteins are highly sensitive to microenvironment, and Stokes shifts can be dominated by the well-known heterogeneous nature of protein structure, leading to what we call pseudo-TDFSS: shifts that arise from differential decay rates of subpopulations. Here we emphasize a novel, general method that obviates pseudo-TDFSS by replacing Trp by 5-fluorotryptophan (5Ftrp), a fluorescent analogue with higher ionization potential and greatly suppressed electron-transfer quenching. 5FTrp slows and suppresses pseudo-TDFSS, thereby providing a clearer view of genuine relaxation caused by solvent and protein response. This procedure is applied to the sweet-tasting protein monellin which has uniquely been the subject of ultrafast studies in two different laboratories (Peon, J.; et al. Proc. Natl. Acad. Sci. U.S.A. 2002, 99, 10964; Xu, J.; et al. J. Am. Chem. Soc. 2006, 128, 1214) that led to disparate interpretations of a 20 ps transient. They differed because of the pseudo-TDFSS present. The current study exploiting special properties of 5FTrp strongly supports the conclusion that both lifetime heterogeneity-based TDFSS and environment relaxation-based TDFSS are present in monellin and 5FTrp-monellin. The original experiments on monellin were most likely dominated by pseudo-TDFSS, whereas, in the present investigation of 5FTrp-monellin, the TDFSS is dominated by relaxation and any residual pseudo-TDFSS is overwhelmed and/or slowed to irrelevance.

The broken ring: reduced aromaticity in Lys-Trp cations and high pH tautomer correlates with lower quantum yield and shorter lifetimes

Several nonradiative processes compete with tryptophan fluorescence emission. The difficulty in spectral interpretation lies in associating specific molecular environmental features with these processes and thereby utilizing the fluorescence spectral data to identify the local environment of tryptophan. Here, spectroscopic and molecular modeling study of Lys-Trp dipeptide charged species shows that backbone-ring interactions are undistinguished. Instead, quantum mechanical ground state isosurfaces reveal variations in indole π electron distribution and density that parallel charge (as a function of pK(1), pK(2), and pK(R)) on the backbone and residues. A pattern of aromaticity-associated quantum yield and fluorescence lifetime changes emerges. Where quantum yield is high, isosurfaces have a charge distribution similar to the highest occupied molecular orbital (HOMO) of indole, which is the dominant fluorescent ground state of the (1)L(a) transition dipole moment. Where quantum yield is low, isosurface charge distribution over the ring is uneven, diminished, and even found off ring. At pH 13, the indole amine is deprotonated, and Lys-Trp quantum yield is extremely low due to tautomer structure that concentrates charge on the indole amine; the isosurface charge distribution bears scant resemblance to the indole HOMO. Such greatly diminished fluorescence has been observed for proteins where the indole nitrogen is hydrogen bonded, lending credence to the association of aromaticity changes with diminished quantum yield in proteins as well. Thus tryptophan ground state isosurfaces are an indicator of indole aromaticity, signaling the partition of excitation energy between radiative and nonradiative processes.

MD + QM correlations with tryptophan fluorescence spectral shifts and lifetimes

Principles behind quenching of tryptophan (Trp) fluorescence are updated and extended in light of recent 100-ns and 1-μs molecular dynamics (MD) trajectories augmented with quantum mechanical (QM) calculations that consider electrostatic contributions to wavelength shifts and quenching. Four studies are summarized, including (1) new insight into the single exponential decay of NATA, (2) a study revealing how unsuspected rotamer transitions affect quenching of Trp when used as a probe of protein folding, (3) advances in understanding the origin of nonexponential decay from 100-ns simulations on 19 Trps in 16 proteins, and (4) the correlation of wavelength with lifetime for decay-associated spectra (DAS). Each study strongly reinforces the concept that-for Trp-electron transfer-based quenching is controlled much more by environment electrostatic factors affecting the charge transfer (CT) state energy than by distance dependence of electronic coupling. In each case, water plays a large role in unexpected ways.

Spectroscopic investigations on the interaction between carbon nanotubes and catalase on molecular level

The interactions between well-dispersed multiwalled carbon nanotubes (MWCNTs) and catalase (CAT) were investigated. The activity of CAT was inhibited with the addition of MWCNTs. After deducting the inner filter effect, the fluorescence spectra revealed that the tryptophan (Trp) residues were exposed and the fluorescence intensities of CAT increased with the increase in the MWCNTs concentration. At the same time, the environment of the Trp residues became more hydrophobic. The results of UV-vis absorption spectroscopy and CD spectra indicated that the secondary structure of CAT had been changed, and the amino acid residues were located in a more hydrophobic environment. Meanwhile, the UV-vis spectra indicated that the conformation of the heme porphyrin rings was changed. The microenvironment of CAT activity sites may be interfered by MWCNTs. This research showed that MWCNTs could not only contribute to the conformational changes of protein but also change the enzyme function.

Dissecting the machinery that introduces disulfide bonds in Pseudomonas aeruginosa

Disulfide bond formation is required for the folding of many bacterial virulence factors. However, whereas the Escherichia coli disulfide bond-forming system is well characterized, not much is known on the pathways that oxidatively fold proteins in pathogenic bacteria. Here, we report the detailed unraveling of the pathway that introduces disulfide bonds in the periplasm of the human pathogen Pseudomonas aeruginosa. The genome of P. aeruginosa uniquely encodes two DsbA proteins (P. aeruginosa DsbA1 [PaDsbA1] and PaDsbA2) and two DsbB proteins (PaDsbB1 and PaDsbB2). We found that PaDsbA1, the primary donor of disulfide bonds to secreted proteins, is maintained oxidized in vivo by both PaDsbB1 and PaDsbB2. In vitro reconstitution of the pathway confirms that both PaDsbB1 and PaDsbB2 shuttle electrons from PaDsbA1 to membrane-bound quinones. Accordingly, deletion of both P. aeruginosa dsbB1 (PadsbB1) and PadsbB2 is required to prevent the folding of several P. aeruginosa virulence factors and to lead to a significant decrease in pathogenicity. Using a high-throughput proteomic approach, we also analyzed the impact of PadsbA1 deletion on the global periplasmic proteome of P. aeruginosa, which allowed us to identify more than 20 new potential substrates of this major oxidoreductase. Finally, we report the biochemical and structural characterization of PaDsbA2, a highly oxidizing oxidoreductase, which seems to be expressed under specific conditions. By fully dissecting the machinery that introduces disulfide bonds in P. aeruginosa, our work opens the way to the design of novel antibacterial molecules able to disarm this pathogen by preventing the proper assembly of its arsenal of virulence factors.

IMPORTANCE

The human pathogen Pseudomonas aeruginosa causes life-threatening infections in immunodepressed and cystic fibrosis patients. The emergence of P. aeruginosa strains resistant to all of the available antibacterial agents calls for the urgent development of new antibiotics active against this bacterium. The pathogenic power of P. aeruginosa is mediated by an arsenal of extracellular virulence factors, most of which are stabilized by disulfide bonds. Thus, targeting the machinery that introduces disulfide bonds appears to be a promising strategy to combat P. aeruginosa. Here, we unraveled the oxidative protein folding system of P. aeruginosa in full detail. The system uniquely consists of two membrane proteins that generate disulfide bonds de novo to deliver them to P. aeruginosa DsbA1 (PaDsbA1), a soluble oxidoreductase. PaDsbA1 in turn donates disulfide bonds to secreted proteins, including virulence factors. Disruption of the disulfide bond formation machinery dramatically decreases P. aeruginosa virulence, confirming that disulfide formation systems are valid targets for the design of antimicrobial drugs.

Spectroscopic investigations on the interactions between isopropanol and trypsin at molecular level

The toxicity of hydroxyl group of isopropanol to trypsin in aqueous solution was investigated by techniques including UV-visible absorption spectroscopy, fluorescence spectroscopy, circular dichroism (CD) spectroscopy, enzyme activity assay and molecular docking technology. The results of UV-visible absorption spectroscopy and CD spectra indicate that isopropanol could change the secondary structure of trypsin by increasing the content of α-helix and decreasing the content of β-sheet. The tertiary structure of trypsin was also changed owing to the loss of environmental asymmetry of amino acid residues. Isopropanol bound into a hydrophobic cavity on the surface of trypsin by a hydrogen bond located between the hydrogen atom on the hydroxyl of isopropanol and the oxygen atoms on SER 214 and hydrophobic interaction, as the molecular docking results showed. In addition, isopropanol could affect the function of trypsin by increasing its catalytic activity.

Fluorescence of tryptophan in designed hairpin and Trp-cage miniproteins: measurements of fluorescence yields and calculations by quantum mechanical molecular dynamics simulations

The quantum yield of tryptophan (Trp) fluorescence was measured in 30 designed miniproteins (17 β-hairpins and 13 Trp-cage peptides), each containing a single Trp residue. Measurements were made in D(2)O and H(2)O to distinguish between fluorescence quenching mechanisms involving electron and proton transfer in the hairpin peptides, and at two temperatures to check for effects of partial unfolding of the Trp-cage peptides. The extent of folding of all the peptides also was measured by NMR. The fluorescence yields ranged from 0.01 in some of the Trp-cage peptides to 0.27 in some hairpins. Fluorescence quenching was found to occur by electron transfer from the excited indole ring of the Trp to a backbone amide group or the protonated side chain of a nearby histidine, glutamate, aspartate, tyrosine, or cysteine residue. Ionized tyrosine side chains quenched strongly by resonance energy transfer or electron transfer to the excited indole ring. Hybrid classical/quantum mechanical molecular dynamics simulations were performed by a method that optimized induced electric dipoles separately for the ground and excited states in multiple π-π* and charge-transfer (CT) excitations. Twenty 0.5 ns trajectories in the tryptophan's lowest excited singlet π-π* state were run for each peptide, beginning by projections from trajectories in the ground state. Fluorescence quenching was correlated with the availability of a CT or exciton state that was strongly coupled to the π-π* state and that matched or fell below the π-π* state in energy. The fluorescence yields predicted by summing the calculated rates of charge and energy transfer are in good accord with the measured yields.

Engineering of fluorescent reporters into redox domains to monitor electron transfers

The rate of electron transfer through multicomponent redox systems is often monitored by following the absorbance change due to the oxidation of the upstream pyridine nucleotide electron donor (NADPH or NADH) that initiates the process. Such coupled assay systems are powerful, but because of problems regarding the rate-limiting step, they sometimes limit the kinetic information that can be obtained about individual components. For peroxiredoxins, such assays have led to widespread underestimates of their catalytic power. We show here how this problem can be addressed by a protein engineering strategy inspired by some bacterial and eukaryotic thioredoxins for which a significant fluorescence signal is generated during oxidation that provides a highly sensitive tool to directly measure electron transfers into and out of these domains. For the N-terminal domain of AhpF (a flavoprotein disulfide reductase) and Escherichia coli glutaredoxin 1, two cases not having such fluorescence signals, we have successfully added "sensor" tryptophan residues using the positions of tryptophan residues in thioredoxins as a guide. In another thioredoxin-fold redox protein, the bacterial peroxiredoxin AhpC, we used chemical modification to introduce a disulfide-bonded fluorophore. This modified AhpC still serves as an excellent substrate for the upstream AhpF electron donor but now generates a strong fluorescence signal during electron transfer. These tools have fundamentally changed our understanding of the catalytic power of peroxiredoxin systems and should also be widely applicable for improving quantitative assay capabilities in other electron transfer systems.

Thermodynamic analysis of denaturant-induced unfolding of HodC69S protein supports a three-state mechanism

Thermodynamic stability parameters and the equilibrium unfolding mechanism of His 6HodC69S, a mutant of 1 H-3-hydroxy-4-oxoquinaldine 2,4-dioxygenase (Hod) having a Cys to Ser exchange at position 69 and an N-terminal hexahistidine tag (His 6HodC69S), have been derived from isothermal unfolding studies using guanidine hydrochloride (GdnHCl) or urea as denaturants. The conformational changes were monitored by following changes in circular dichroism (CD), fluorescence, and dynamic light scattering (DLS), and the resulting transition curves were analyzed on the basis of a sequential three-state model N = I = D. The structural changes have been correlated to catalytic activity, and the contribution to stability of the disulfide bond between residues C37 and C184 in the native protein has been established. A prominent result of the present study is the finding that, independent of the method used for denaturing the protein, the unfolding mechanism always comprises three states which can be characterized by, within error limits, identical sets of thermodynamic parameters. Apparent deviations from three-state unfolding can be rationalized by the inability of a spectroscopic probe to discriminate clearly between native, intermediate, and unfolded ensembles. This was the case for the CD-monitored urea unfolding curve.

Site-directed mutagenesis of conserved C-terminal tyrosine and tryptophan residues of PsbO, the photosystem II manganese-stabilizing protein, alters its activity and fluorescence properties

The extrinsic photosystem II PsbO subunit (manganese-stabilizing protein) contains near-UV CD signals from its complement of aromatic amino acid residues (one Trp, eight Tyr, and 13 Phe residues). Acidification, N-bromosuccinimide modification of Trp, reduction or elimination of a disulfide bond, or deletion of C-terminal amino acids abolishes these signals. Site-directed mutations that substitute Phe for Trp241 and Tyr242, near the C-terminus of PsbO, were used to examine the contribution of these residues to the activity and spectral properties of the protein. Although this substitution is, in theory, conservative, neither mutant binds efficiently to PSII, even though these proteins appear to retain wild-type solution structures. Removal of six residues from the N-terminus of the W241F mutant restores activity to near-wild-type levels. The near-UV CD spectra of the mutants are modified; well-defined Tyr and Trp peaks are lost. Characterizations of the fluorescence spectra of the full-length WF and YF mutants indicate that Y242 contributes significantly to PsbO's Tyr fluorescence emission and that an excited-state tyrosinate could be present in PsbO. Deletion of W241 shows that this residue is a major contributor to PsbO's fluorescence emission. Loss of function is consistent with the proposal that a native C-terminal domain is required for PsbO binding and activity, and restoration of activity by deletion of N-terminal amino acids may provide some insights into the evolution of this important photosynthetic protein.

Contributions of a disulfide bond to the structure, stability, and dimerization of human IgG1 antibody CH3 domain

Recombinant human monoclonal antibodies have become important protein-based therapeutics for the treatment of various diseases. The antibody structure is complex, consisting of beta-sheet rich domains stabilized by multiple disulfide bridges. The dimerization of the C(H)3 domain in the constant region of the heavy chain plays a pivotal role in the assembly of an antibody. This domain contains a single buried, highly conserved disulfide bond. This disulfide bond was not required for dimerization, since a recombinant human C(H)3 domain, even in the reduced state, existed as a dimer. Spectroscopic analyses showed that the secondary and tertiary structures of reduced and oxidized C(H)3 dimer were similar, but differences were observed. The reduced C(H)3 dimer was less stable than the oxidized form to denaturation by guanidinium chloride (GdmCl), pH, or heat. Equilibrium sedimentation revealed that the reduced dimer dissociated at lower GdmCl concentration than the oxidized form. This implies that the disulfide bond shifts the monomer-dimer equilibrium. Interestingly, the dimer-monomer dissociation transition occurred at lower GdmCl concentration than the unfolding transition. Thus, disulfide bond formation in the human C(H)3 domain is important for stability and dimerization. Here we show the importance of the role played by the disulfide bond and how it affects the stability and monomer-dimer equilibrium of the human C(H)3 domain. Hence, these results may have implications for the stability of the intact antibody.

DNA-binding Activity of the ERp57 C-terminal Domain Is Related to a Redox-dependent Conformational Change

ERp57, a member of the protein-disulfide isomerase family, although mainly localized in the endoplasmic reticulum is here shown to have a nuclear distribution. We previously showed the DNA-binding properties of ERp57, its association with the internal nuclear matrix, and identified the C-terminal region, containing the a' domain, as being directly involved in the DNA-binding activity. In this work, we demonstrate that its DNA-binding properties are strongly dependent on the redox state of the a' domain active site. Site-directed mutagenesis experiments on the first cysteine residue of the -CGHC-thioredoxin-like active site lead to a mutant domain (C406S) lacking DNA-binding activity. Biochemical studies on the recombinant domain revealed a conformational change associated with the redox-dependent formation of a homodimer, having two disulfide bridges between the cysteine residues of two a' domain active sites. The formation of intermolecular disulfide bridges rather than intramolecular oxidation of active site cysteines is important to generate species with DNA-binding properties. Thus, in the absence of any dedicated motif within the protein sequence, this structural rearrangement might be responsible for the DNA-binding properties of the C-terminal domain. Moreover, NADH-dependent thioredoxin reductase is active on intermolecular disulfides of the a' domain, allowing the control of dimeric protein content as well as its DNA-binding activity. A similar behavior was also observed for whole ERp57.

Dissection of complex protein dynamics in human thioredoxin

We report our direct study of complex protein dynamics in human thioredoxin by dissecting into elementary processes and determining their relevant time scales. By combining site-directed mutagenesis with femtosecond spectroscopy, we have distinguished four partly time-overlapped dynamical processes at the active site of thioredoxin. Using intrinsic tryptophan as a molecular probe and from mutation studies, we ascertained the negligible contribution to solvation by protein sidechains and observed that the hydration dynamics at the active site occur in 0.47-0.67 and 10.8-13.2 ps. With reduced and oxidized states, we determined the electron-transfer quenching dynamics between excited tryptophan and a nearby disulfide bond in 10-17.5 ps for three mutants. A robust dynamical process in 95-114 ps, present in both redox states and all mutants regardless of neighboring charged, polar, and hydrophobic residues around the probe, is attributed to the charge transfer reaction with its adjacent peptide bond. Site-directed mutations also revealed the electronic quenching dynamics by an aspartate residue at a hydrogen bond distance in 275-615 ps. The local rotational dynamics determined by the measurement of anisotropy changes with time unraveled a relatively rigid local configuration but implies that the protein fluctuates on the time scale of longer than nanoseconds. These results elucidate the temporal evolution of hydrating water motions, electron-transfer reactions, and local protein fluctuations at the active site, and show continuously synergistic dynamics of biological function over wide time scales.

A Tryptophan Rotamer Located in a Polar Environment Probes pH-Dependent Conformational Changes in Bovine β-Lactoglobulin A

Bovine beta-lactoglobulin A (BLGA) is a well characterized globular protein whose tertiary structure has been investigated in detail. BLGA undergoes a pH-dependent conformational change which X-ray data described as involving mostly the loop connecting strands E and F and the deprotonation of a glutamic acid residue (Glu89). These structural changes have been investigated using, among other techniques, fluorescence spectroscopy. The intrinsic fluorescence of BLGA is dominated by two Trp residues. These residues are located far from the EF loop and would not be expected to probe the pH-induced conformational change of the protein. Trp19 is located at the bottom of the interior beta-barrel, whereas Trp61 is located at the aperture of the barrel near the CD loop and is "silent" in the emission of native BLGA because of the proximity of a disulfide moiety. Our study suggests that, surprisingly, the fluorescence of Trp19 has the characteristic of a more polar environment than structural models from X-ray data would suggest and that at least two distinct conformations (or rotamers) of Trp19 contribute to the fluorescence of the protein. The less populated rotamer (relative amplitude (alpha) approximately 20%, tau approximately 3 ns) probes a more polar environment and a pH-dependent conformational change of BLGA in the region of Trp19 which X-ray data do not detect. Finally, our study provides the estimate of the fluorescence lifetime of Trp61 in the "unquenched" form.

Kinetic characterization of the disulfide bond-forming enzyme DsbB

DsbB is an integral membrane protein responsible for the de novo synthesis of disulfide bonds in Escherichia coli and many other prokaryotes. In the process of transferring electrons from DsbA to a tightly bound ubiquinone cofactor, DsbB undergoes an unusual spectral transition at approximately 510 nm. We have utilized this spectral transition to study the kinetic cycle of DsbB in detail using stopped flow methods. We show that upon mixing of Dsb-B(ox) and DsbA(red), there is a rapid increase in absorbance at 510 nm (giving rise to a purple solution), followed by two slower decay phases. The rate of the initial phase is highly dependent upon DsbA concentration (k(1) approximately 5 x 10(5) M(-1) s(-1)), suggesting this phase reflects the rate of DsbA binding. The rates of the subsequent decay phases are independent of DsbA concentration (k(2) approximately 2 s(-1); k(3) approximately 0.3 s(-1)), indicative of intramolecular reaction steps. Absorbance measurements at 275 nm suggest that k(2) and k(3) are associated with steps of quinone reduction. The rate of DsbA oxidation was found to be the same as the rate of quinone reduction, suggestive of a highly concerted reaction. The concerted nature of the reaction may explain why previous efforts to dissect the reaction mechanism of DsbB by examining individual pairs of cysteines yielded seemingly paradoxical results. Order of mixing experiments showed that the quinone must be pre-bound to DsbB to observe the purple intermediate as well as for efficient quinone reduction. These results are consistent with a kinetic model for DsbB action in which DsbA binding is followed by a rapid disulfide exchange event. This is followed by quinone reduction, which is rate-limiting in the overall reaction cycle.

Spectroscopic characterization of heat-induced nonnative beta-lactoglobulin monomers

Previous studies have shown that two altered monomeric species were formed in the early steps of thermal denaturation of bovine beta-lactoglobulin (beta-lg), the well-known Cys121-exposed intermediate (Mcys121), and a new, stable monomer with exposed nonnative Cys119 (Mcys119). In this study, circular dichroism and fluorescence spectroscopies were used to characterize the structural features of these molecules. The structural characteristics of MCys121 after heating and cooling cycles are similar to those of native beta-lg. In contrast, Mcys119 monomer exhibits some characteristics of the well-known molten-globule state. Combined with other published data, these results indicate that heating induces at least two molten globule-like states of beta-lg, a highly reactive Mcys121 that returns to native state after cooling, and a less-reactive Mcys119 that is trapped and stabilized in a molten globule-like state by nonnative disulfide bond.

Energy Migration in Novel pH-Triggered Self-Assembled β-Sheet Ribbons

Energy migration between tryptophan residues has been experimentally demonstrated in self-assembled peptide tapes. Each peptide contains 11 amino acids with a Trp at position 6. The peptide self-assembly is pH-sensitive and forms amphiphilic tapes, which further stack in ribbons (double tapes) and fibrils in water depending on the concentration. Fluorescence spectra, quenching, and anisotropy experiments showed that when the pH is lowered from 9 to 2, the peptide self-assembly buries the tryptophan in a hydrophobic and restricted environment in the interior of stable ribbons as expected on the basis of the peptide design. These fluorescence data support directly and for the first time the presence of such ribbons which are characterized by a highly packed and stable hydrophobic interior. In common with Trp in many proteins, fluorescence lifetimes are nonexponential, but the average lifetime is shorter at low pH, possibly due to quenching with neighboring Phe residues. Unexpectedly, time-resolved fluorescence anisotropy does not change significantly with self-assembly when in water. In highly viscous sucrose-water mixtures, the anisotropy decay at low pH was largely unchanged compared to that in water, whereas at high pH, the anisotropy decay increased significantly. We concluded that depolarization at low pH was not due to rotational diffusion but mainly due to energy migration between adjacent tryptophan residues. This was supported by a master equation kinetic model of Trp-Trp energy migration, which showed that the simulated and experimental results are in good agreement, although on average only three Trp residues were visited before emission.

The dead-end elimination method, tryptophan rotamers, and fluorescence lifetimes

The Dead-End Elimination method was used to identify 40 low energy microconformations of 16 tryptophan residues in eight proteins. Single Trp-mutants of these proteins all show a double- or triple-exponential fluorescence decay. For ten of these lifetimes the corresponding rotameric state could be identified by comparing the bimolecular acrylamide quenching constant (k(q)) and the relative solvent exposure of the side chain in that microstate. In the absence of any identifiable quencher, the origin of the lifetime heterogeneity is interpreted in terms of the electron transfer process from the indole C epsilon 3 atom to the carbonyl carbon of the peptide bond. Therefore it is expected that a shorter [C epsilon 3-C[double bond]O] distance leads to a shorter lifetime as observed for these ten rotamers. Applying the same rule to the other 30 lifetimes, a link with their corresponding rotameric state could also be made. In agreement with the theory of Marcus and Sutin, the nonradiative rate constant shows an exponential relationship with the [C epsilon 3-C[double bond]O] distance for the 40 datapoints.

Catalysis of protein folding by protein disulfide isomerase and small-molecule mimics

Protein disulfide isomerase (PDI) catalyzes the formation of native disulfide pairings in secretory proteins. The ability of PDI to act as a disulfide isomerase makes it an essential enzyme in eukaryotes. PDI also fulfills other important roles. Recent studies have emphasized the importance of PDI as an oxidant in the endoplasmic reticulum. Intriguing questions remain regarding how PDI is able to catalyze both isomerization and oxidation in vivo. Studies of PDI and its homologues have led to the development of small-molecule folding catalysts that are able to accelerate disulfide isomerization in vitro and in vivo. PDI will continue to provide both an inspiration for the design of such artificial foldases and a benchmark with which to gauge the success of those designs. Here, we review current understanding of the chemistry and biology of PDI, its homologues, and small molecules that mimic its catalytic activity.

Characterization of SrgA, a Salmonella enterica serovar Typhimurium virulence plasmid-encoded paralogue of the disulfide oxidoreductase DsbA, essential for biogenesis of plasmid-encoded fimbriae

Disulfide oxidoreductases are viewed as foldases that help to maintain proteins on productive folding pathways by enhancing the rate of protein folding through the catalytic incorporation of disulfide bonds. SrgA, encoded on the virulence plasmid pStSR100 of Salmonella enterica serovar Typhimurium and located downstream of the plasmid-borne fimbrial operon, is a disulfide oxidoreductase. Sequence analysis indicates that SrgA is similar to DsbA from, for example, Escherichia coli, but not as highly conserved as most of the chromosomally encoded disulfide oxidoreductases from members of the family Enterobacteriaceae. SrgA is localized to the periplasm, and its disulfide oxidoreductase activity is dependent upon the presence of functional DsbB, the protein that is also responsible for reoxidation of the major disulfide oxidoreductase, DsbA. A quantitative analysis of the disulfide oxidoreductase activity of SrgA showed that SrgA was less efficient than DsbA at introducing disulfide bonds into the substrate alkaline phosphatase, suggesting that SrgA is more substrate specific than DsbA. It was also demonstrated that the disulfide oxidoreductase activity of SrgA is necessary for the production of plasmid-encoded fimbriae. The major structural subunit of the plasmid-encoded fimbriae, PefA, contains a disulfide bond that must be oxidized in order for PefA stability to be maintained and for plasmid-encoded fimbriae to be assembled. SrgA efficiently oxidizes the disulfide bond of PefA, while the S. enterica serovar Typhimurium chromosomally encoded disulfide oxidoreductase DsbA does not. pefA and srgA were also specifically expressed at pH 5.1 but not at pH 7.0, suggesting that the regulatory mechanisms involved in pef gene expression are also involved in srgA expression. SrgA therefore appears to be a substrate-specific disulfide oxidoreductase, thus explaining the requirement for an additional catalyst of disulfide bond formation in addition to DsbA of S. enterica serovar Typhimurium.

Randomization of the entire active-site helix alpha 1 of the thiol-disulfide oxidoreductase DsbA from Escherichia coli

DsbA from Escherichia coli is the most oxidizing member of the thiol-disulfide oxidoreductase family (E(o)' = -122 mV) and is required for efficient disulfide bond formation in the periplasm. The reactivity of the catalytic disulfide bond (Cys(30)-Pro(31)-His(32)-Cys(33)) is primarily due to an extremely low pK(a) value (3.4) of Cys(30), which is stabilized by the partial positive dipole charge of the active-site helix alpha1 (residues 30-37). We have randomized all non-cysteine residues of helix alpha1 (residues 31, 32, and 34-37) and found that two-thirds of the resulting variants complement DsbA deficiency in a dsbA deletion strain. Sequencing of 98 variants revealed a large number of non-conservative replacements in active variants, even at well conserved positions. This indicates that tertiary structure context strongly determines alpha-helical secondary structure formation of the randomized sequence. A subset of active and inactive variants was further characterized. All these variants were more reducing than wild type DsbA, but the redox potentials of active variants did not drop below -210 mV. All inactive variants had redox potentials lower than -210 mV, although some of the inactive proteins were still re-oxidized by DsbB. This demonstrates that efficient oxidation of substrate polypeptides is the crucial property of DsbA in vivo.

Two general methods for the isolation of enzyme activities by colony filter screening

We describe two general methodologies, based on filter-sandwich assays, for isolating enzymatic activities from a large repertoire of protein variants expressed in the cytoplasm of E. coli cells. The enzymes are released by the freezing and thawing of bacterial colonies grown on a porous master filter and diffuse to a second "reaction" filter that closely contacts the master filter. Reaction substrates can be immobilized either on the filter or on the enzyme itself (which is then, in turn, captured on the reaction filter). The resulting products are detected with suitable affinity reagents. We used biotin ligase as a model enzyme to assess the performance of the two methodologies. Active enzymes were released by the bacteria, locally biotinylated the immobilized target substrate peptide, and allowed the sensitive and specific detection of individual catalytically active colonies.

Selection of catalytically active biotin ligase and trypsin mutants by phage display

Phage display has been shown to facilitate greatly the selection of polypeptides with desired properties by establishing a direct link between the polypeptide and the gene that encodes it. However, selection for catalytic activities displayed on phage remains a challenge, since reaction products diffuse away from the enzyme and make it difficult to recover catalytically active phage-enzymes. We have recently described a selection methodology in which the reaction substrate (and eventually the reaction product) is anchored on calmodulin-tagged phage-enzymes by means of a calmodulin binding peptide. Phage displaying a catalytic activity are physically isolated by means of affinity reagents specific for the product of reaction. In this study, we investigated the efficiency of selection for catalysis by phage display, using a ligase (the Escherichia coli biotin ligase BirA) and an endopeptidase (the rat trypsin His57--> Ala mutant) as model enzymes. These enzymes could be displayed on phage as fusion proteins with calmodulin and the minor coat protein pIII. Both the display of functional enzyme and the efficiency of selection for catalysis were significantly improved by using phage vectors, rather than phagemid vectors. In model selection experiments, phage displaying BirA were consistently enriched (between 4-fold and 800-fold) per round of panning, relative to negative controls. Phage displaying the trypsin His57-->Ala mutant, a relatively inefficient endopeptidase which cleaves a specific dipeptide sequence, were enriched (between 15-fold and 2000-fold), relative to negative controls. In order to improve the catalytic properties of the trypsin His57-->Ala mutant, we constructed a combinatorial phage display library of trypsin mutants. Selection of catalytically active phage-enzymes was evidentiated by increasing phage titres at the different rounds of panning relative to negative control selections, but mutants with catalytic properties superior to those of trypsin His57-->Ala mutant could not be isolated. The results obtained provide evidence that catalytic activities can be recovered using phage display technology, but stress the importance of both library design and stringent biopanning conditions for the recovery of novel enzymes.

The analysis of time resolved protein fluorescence in multi-tryptophan proteins

In the last decades, considerable progress has been made in the analysis of the fluorescence decay of proteins with more than one tryptophan. The construction of single tryptophan containing proteins has shown that the lifetimes of the wild type proteins are often the linear combinations of the family lifetimes of the contributing tryptophan residues. Additivity is not followed when energy transfer takes place among tryptophan residues or when the structure of the remaining protein is altered upon the modification. Progress has also been made in the interpretation of the value of the lifetime and the linkage with the immediate environment. Probably all the irreversible processes leading to return to the ground state have been catalogued and their rate constants are documented. Also, the process of electron transfer to the peptide carbonyl is becoming more and more documented and is linked to the rotameric state of tryptophan. Reversible excited state processes are also being considered, including reversible interconversions between rotamers. Interesting information about tryptophan and its environment comes also from anisotropy measurements for proteins in the native, the denatured and the molten globule states. Alterations of protein fluorescence due to the effects of ligand binding or side chain modifications can be analyzed via the ratio of the quantum yields of the modified protein and the reference state. Using the ratio of quantum yields and the (amplitude weighted) average lifetime, three factors can be identified: (1) a change in the apparent radiative rate constant reflecting either static quenching or an intrinsic change in the radiative properties; (2) a change in dynamic quenching; and (3) a change in the balance of the populations of the microstates or local static quenching.

Assignment of the contribution of the tryptophan residues to the spectroscopic and functional properties of the ribotoxin alpha-sarcin

alpha-Sarcin, a potent cytotoxic protein from Aspergillus giganteus, contains two tryptophan residues at positions 4 and 51. Two single, W4F and W51F, and the double mutant, W4/51F, have been produced and purified to homogeneity. These two residues are neither required for the highly specific ribonucleolytic activity of the protein on the ribosomes (production of the so called alpha-fragment) nor for its interaction with lipid membranes (aggregation and fusion of vesicles), although the mutant forms involving Trp-51 show a decreased ribonuclease activity. Proton NMR data reveal that no significant changes in the global structure of the enzyme occur upon replacement of Trp-51 by Phe. Substitution of each Trp residue results in a 4 degrees C drop in the thermal denaturation midpoint, and the double mutant's midpoint is 9 degrees C lower. Trp-51 is responsible for most of the near-UV circular dichroism of the protein and also contributes to the overall ellipticity of the protein in the peptide bond region. Trp-51 does not show fluorescence emission. The membrane-bound proteins undergo a thermal denaturation at a lower temperature than the corresponding free forms. The interaction of the protein with phospholipid bilayers promotes a large increase of the quantum yield of Trp-51 and its fluorescence emission is quenched by anthracene incorporated into the hydrophobic region of such bilayers. This indicates that the region around this residue is located in the hydrophobic core of the bilayer following protein-vesicle interaction.

Trp42 rotamers report reduced flexibility when the inhibitor acetyl-pepstatin is bound to HIV-1 protease

The Q7K/L331/L631 HIV-1 protease mutant was expressed in Escherichia coli and the effect of binding a substrate-analog inhibitor, acetyl-pepstatin, was investigated by fluorescence spectroscopy and molecular dynamics. The dimeric enzyme has four intrinsic tryptophans, located at positions 6 and 42 in each monomer. Fluorescence spectra and acrylamide quenching experiments show two differently accessible Trp populations in the apoenzyme with k(q1) = 6.85 x 10(9) M(-1) s(-1) and k(q2) = 1.88 x 10(9) M(-1) s(-1), that merge into one in the complex with k(q) = 1.78 x 10(9) M(-1) s(-1). 500 ps trajectory analysis of Trp X1/X2 rotameric interconversions suggest a model to account for the observed Trp fluorescence. In the simulations, Trp6/Trp6B rotameric interconversions do not occur on this timescale for both HIV forms. In the apoenzyme simulations, however, both Trp42s and Trp42Bs are flipping between X1/X2 states; in the complexed form, no such interconverions occur. A detailed investigation of the local Trp environments sampled during the molecular dynamics simulation suggests that one of the apoenzyme Trp42B rotameric interconversions would allow indole-quencher contact, such as with nearby Tyr59. This could account for the short lifetime component. The model thus interprets the experimental data on the basis of the conformational fluctuations of Trp42s alone. It suggests that the rotameric interconversions of these Trps, located relatively far from the active site and at the very start of the flap region, becomes restrained when the apoenzyme binds the inhibitor. The model is thus consistent with associating components of the fluorescence decay in HIV-1 protease to ground state conformational heterogeneity.

Heat treatment of beta-lactoglobulin: structural changes studied by partitioning and fluorescence

Functional properties of whey protein concentrates (WPC) are primarily dependent on the degree of denaturation of beta-lactoglobulin (beta-LG), the major globular whey protein. Irreversible modifications in the tertiary structure and association state of beta-LG after heat treatment were studied by partition in aqueous two-phase systems and fluorescence quenching. Partitioning of preheated beta-LG in two-phase systems containing 5% (w/w) poly(ethylene glycol) and 7% (w/w) dextran, between pH 6.0 and7.0, are appropriately related with the intensity of heat treatment. An increase in the partition coefficient of beta-LG was observed with increasing temperature of heat treatment. On the other hand, fluorescence quenching of beta-LG by acrylamide was used to study the conformational flexibility of the protein at pH values between 4. 0 and 9.0. The values of bimolecular quenching rate constant (k(q)) obtained showed that beta-LG appears to be more flexible at high pH values, while at low pH the protein assumes a more compact form. The efficiency of acrylamide quenching on preheated beta-LG was substantially more pronounced than for the untreated protein. This difference can be ascribed to the presence of unfolded monomers and aggregates of denatured molecules formed after heat treatment, whose tryptophanyl residues are more exposed to the solvent. In conclusion, the results suggest that partition studies in aqueous two-phase systems and fluorescence quenching are very useful tools to detect changes in conformation and aggregation of beta-LG induced by heat treatment.

A step toward the prediction of the fluorescence lifetimes of tryptophan residues in proteins based on structural and spectral data

A method is presented that allows the calculation of the lifetimes of tryptophan residues on the basis of spectral and structural data. It is applied to two different proteins. The calcium binding protein from the sarcoplasm of the muscles of the sand worm Nereis diversicolor (NSCP) changes its conformation upon binding of Ca2+ or Mg2+. NSCP contains three tryptophan residues at position 4, 57, and 170, respectively. The fluorescence lifetimes of W57 are investigated in a mutant in which W4 and W170 have been replaced. The time resolved fluorescence properties of W57 are linked to its different microconformations, which were determined by a molecular dynamics simulation map. Together with the determination of the radiative rate constant from the wavelength of maximum intensity of the decay associated spectra, it was possible to determine an exponential relation between the nonradiative rate constant and the distance between the indole CE3 atom and the carbonyl carbon of the peptide bond reflecting a mechanism of electron transfer as the main determinant of the value for the nonradiative rate constant. This result allows the calculation of the fluorescence lifetimes from the protein structure and the spectra. This method was further tested for the tryptophan of Ha-ras p21 (W32) and for W43 of the Tet repressor, which resulted in acceptable values for the predicted lifetimes.

Fluorescence quenching in the DsbA protein from Escherichia coli: complete picture of the excited-state energy pathway and evidence for the reshuffling dynamics of the microstates of tryptophan

The disulfide oxidoreductase DsbA is a strong oxidant of protein thiols and is required for efficient disulfide bond formation in the bacterial periplasm. DsbA contains two tryptophans: W76 and W126. The fluorescence of W76 changes upon reduction of the disulfide bridge, as analyzed previously (Hennecke et al., Biochemistry 1997;36:6391-6400). The fluorescence of W126 is highly quenched. The only two potential side chain quenchers are Q74 and N127, and these were replaced by alanine, resulting in a threefold increase in fluorescence intensity. The fluorescence intensity increase is not due to the removal of dynamic quenchers but to an increase in the population with the longest lifetime. In this report, the possibility of a change in the conformation of W126 is investigated theoretically by using molecular mechanics and dynamic simulations and experimentally by using a reaction with N-bromosuccinimide. This reacts preferably with the most exposed microstate of tryptophan, which is responsible for the longest lifetime. The simulations and the experimental results reveal that the amino acid replacements allow W126 to increase the population of its antiperpendicular conformation. The selectivity of the N-bromosuccinimide reaction allows the visualization of the reshuffling kinetics at exhausting reagent concentration. To the authors' knowledge, this is the first time that the kinetics of Trp population reshuffling have been measured.

Effect of heat treatment on bovine beta-lactoglobulin A, B, and C explored using thiol availability and fluorescence

Dilute solutions of beta-lactoglobulin (beta-Lg) A, B, and C were heated at temperatures between about 40 and 94 degrees C for 10 min, cooled, and analyzed using Trp fluorescence and extrinsic fluorescence spectra of the probe 1,8-anilinonaphthalene sulfonate (ANS). Thiol availabilities using 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) were determined using a separate set of samples. The normalized ANS fluorescence emission intensity and the thiol availability results showed a 1:1 relationship with the loss of nativelike but not SDS-monomeric protein, as determined by PAGE analysis. The normalized Trp emission intensity results did not show a comparable 1:1 relationship with the loss of nativelike protein, indicating that the Trp intensity arose from consequential disulfide bond reorganization and not the initial unfolding reaction. The results were also analyzed in terms of two-state models, and the midpoint temperatures (T(mid)) for the proteins were generally beta-Lg C > beta-Lg A > beta-Lg B, and the slopes at the midpoint temperatures for the A variant were generally less than those for the B and C variants indicating that beta-Lg A may denature by a different mechanism from that of beta-Lg B or beta-Lg C. The T(mid) parameters derived from the ANS fluorescence intensity results were similar to those for thiol availability and both were lower than the T(mid) values for Trp emission intensity showing that creation of an ANS binding site on a beta-Lg molecule was linked to the irreversible exposure of a thiol group and the loss of native beta-Lg but preceded the decrease in Trp(61) fluorescence quenching. These results for the differences between the behavior of the A and B or the C variants involved the creation of a destabilizing cavity by the Val(118)Ala (A --> B) substitution and the changed charge distribution within the CD loop caused by the Asp(64)Gly (A --> B) substitution.

Random circular permutation of DsbA reveals segments that are essential for protein folding and stability

One of the key questions in protein folding is whether polypeptide chains require unique nucleation sites to fold to the native state. In order to identify possible essential polypeptide segments for folding, we have performed a complete circular permutation analysis of a protein in which the natural termini are in close proximity. As a model system, we used the disulfide oxidoreductase DsbA from Escherichia coli, a monomeric protein of 189 amino acid residues. To introduce new termini at all possible positions in its polypeptide chain, we generated a library of randomly circularly permuted dsbA genes and screened for active circularly permuted variants in vivo. A total of 51 different active variants were identified. The new termini were distributed over about 70 % of the polypeptide chain, with the majority of them occurring within regular secondary structures. New termini were not found in approximately 30 % of the DsbA sequence which essentially correspond to four alpha-helices of DsbA. Introduction of new termini into these "forbidden segments" by directed mutagenesis yielded proteins with altered overall folds and strongly reduced catalytic activities. In contrast, all active variants analysed so far show structural and catalytic properties comparable with those of DsbA wild-type. We suggest that random circular permutation allows identification of contiguous structural elements in a protein that are essential for folding and stability.

Oxidative refolding chromatography: folding of the scorpion toxin Cn5

We have made an immobilized and reusable molecular chaperone system for oxidative refolding chromatography. Its three components-GroEL minichaperone (191-345), which can prevent protein aggregation; DsbA, which catalyzes the shuffling and oxidative formation of disulfide bonds; and peptidyl-prolyl isomerase-were immobilized on an agarose gel. The gel was applied to the refolding of denatured and reduced scorpion toxin Cn5. The 66-residue toxin, which has four disulfide bridges and a cis peptidyl-proline bond, had not previously been refolded in reasonable yield. We recovered an 87% yield of protein with 100% biological activity.