Influence of Hydrophobic Teflon Particles on the Structure of Amyloid β-Peptide

Surface modification of hydroxyapatite nanoparticles for bone regeneration by controlling their surface hydration and protein adsorption states

Autogenous bone and metallic implant grafting has been used to repair and regenerate bone defects. However, there are still many unresolved problems. It is suggested that bioceramic nanoparticles should be developed and designed to promote effective bone regeneration. In addition, it is necessary to synthesize bioceramic nanoparticles that can support proteins related to bone repair and regeneration such as collagen and albumin. As the protein-interactive bioceramic, hydroxyapatite (HA) deserves to be mentioned and has several attractive properties that are useful in biomedical fields (e.g., biocompatibility, protein adsorption capacity and stability in the physiological environment). In order to prepare novel HA nanoparticles with high biocompatibility, it can be considered that human bones are mainly composed of HA and contain a small amount of silicate, and therefore, the design of coexistence of HA with silicate can be focused. Moreover, it is proposed that the state of the hydration layer on the nanoparticle surfaces can be controlled by introducing heteroelements and polymer chains, which have a great influence on the subsequent protein adsorption and cell adhesion. In this perspective, in order to develop novel bioceramic nanoparticles for the treatment of bone defect, the design of highly biocompatible HA nanoparticles and the control of the hydration layer and protein adsorption states on the surfaces were systematically discussed based on their surface modification techniques, which are very important for the proper understanding of the interface between cells and bioceramics, leading to the further application in biomedical fields.

The role of surfaces on amyloid formation

Interfaces can strongly accelerate or inhibit protein aggregation, destabilizing proteins that are stable in solution or, conversely, stabilizing proteins that are aggregation-prone. Although this behaviour is well-known, our understanding of the molecular mechanisms underlying surface-induced protein aggregation is still largely incomplete. A major challenge is represented by the high number of physico-chemical parameters involved, which are highly specific to the considered combination of protein, surface properties, and solution conditions. The key aspect determining the role of interfaces is the relative propensity of the protein to aggregate at the surface with respect to bulk. In this review, we discuss the multiple molecular determinants that regulate this balance. We summarize current experimental techniques aimed at characterizing protein aggregation at interfaces, and highlight the need to complement experimental analysis with theoretical modelling. In particular, we illustrate how chemical kinetic analysis can be combined with experimental methods to provide insights into the molecular mechanisms underlying surface-induced protein aggregation, under both stagnant and agitation conditions. We summarize recent progress in the study of important amyloids systems, focusing on selected relevant interfaces.

Fluorinated Molecules and Nanotechnology: Future 'Avengers' against the Alzheimer's Disease?

Alzheimer’s disease (AD) is a serious health concern, affecting millions of people globally, which leads to cognitive impairment, dementia, and inevitable death. There is still no medically accepted treatment for AD. Developing therapeutic treatments for AD is an overwhelming challenge in the medicinal field, as the exact mechanics underlying its devastating symptoms is still not completely understood. Rather than the unknown mechanism of the disease, one of the limiting factors in developing new drugs for AD is the blood–brain barrier (BBB). A combination of nanotechnology with fluorinated molecules is proposed as a promising therapeutic treatment to meet the desired pharmacokinetic/physiochemical properties for crossing the BBB passage. This paper reviews the research conducted on fluorine-containing compounds and fluorinated nanoparticles (NPs) that have been designed and tested for the inhibition of amyloid-beta (Aβ) peptide aggregation. Additionally, this study summarizes fluorinated molecules and NPs as promising agents and further future work is encouraged to be effective for the treatment of AD.

Towards the control of the biological identity of nanobiomaterials: Impact of the structure of 011¯0 surface terminations of nanohydroxyapatite on the conformation of adsorbed proteins

High-resolution transmission electron microscopy, ζ-potential and in-situ IR spectroscopy of adsorbed CO were combined for elucidating the ratio between {011¯0}_ Ca-rich: {011¯0}_ P-rich terminations of {011¯0} facets, i.e. the surfaces with the highest morphological importance, in two nanohydroxyapatite samples. Bovine serum albumin was found to form at least a monolayer on the surface left accessible to protein molecules by the agglomeration of nanoparticles when suspended in the buffered incubation medium. Noticeably, the conformation of adsorbed proteins appeared sensitive to the ratio between the two types of {011¯0} terminations, also resulting in a difference in the surface exposed toward the exterior by the adsorbed protein layer(s).

Surface-Directed Structural Transition of Amyloidogenic Aggregates and the Resulting Neurotoxicity

The transition of amyloidogenic species into ordered structures (i.e., prefibrillar oligomers, protofibrils, mature fibrils, and amyloidogenic aggregates) is closely associated with many neurodegenerative disease pathologies. It is increasingly appreciated that the liquid-solid interface contributes to peptide aggregation under physiological conditions. However, much remains to be explored on the molecular mechanism of surface-directed amyloid formation. We herein demonstrate that physical environmental conditions (i.e., negatively charged surface) affect amyloid formation. Nontoxic amyloid aggregates quickly develop into intertwisting fibrils on a negatively charged mica surface. These fibrillar structures show significant cytotoxicity on both neuroblastoma cell-lines (SH-SY5Y) and primary neural stem cells. Our results suggest an alternative amyloid development pathway, following which Aβ peptides form large amyloidogenic aggregates upon stimulation, and later transit into neurotoxic fibrillar structures while being trapped and aligned by a negatively charged surface. Conceivably, the interplay between chemical and physical environmental conditions plays important roles in the development of neurodegenerative diseases.

Steric Dependence of Chirality Effect in Surface-Mediated Peptide Assemblies Identified with Scanning Tunneling Microscopy

Amino acid chirality has been recognized as an important driving force in constructing peptide architectures, via interactions such as chirality-induced stereochemical effect. The introduction of site-specific chiral conversion of l- and d-amino acids in peptide sequences could enable the pursuit of the chirality effects in peptide assembly. In this work, we characterized the assemblies of heptapeptides with various side chain moieties and their chiral variants using STM. Specifically, two pairs of amino acids, Gln (Q) and Asn (N), Glu (E) and Asp (D), having one methylene difference in their side chains, are selected to elucidate the steric dependence of amino acid chiral effects on surface-bound peptide assemblies. The observed heptapeptide assembly structures reveal that chirality switching of a single amino acid is able to destabilize the surface-mediated peptide assemblies, and this disturbance effect can be positively correlated with the steric hindrance of amino acid side chains. Furthermore, the strength of the impact due to chiral conversion on heptapeptide assembly structure is noticeably dependent on the mutation sites, indicative of structural heterogeneity of chiral effects. These results could contribute to the molecular insights of chirality-induced stereochemical interactions in peptide assembly.

Effect of Terminal Modifications on the Adsorption and Assembly of hIAPP(20-29)

The assembly of peptides and proteins into nanoscale amyloid fibrils via formation of intermolecular β-sheets not only plays an important role in the development of degenerative diseases but also represents a promising approach for the synthesis of functional nanomaterials. In many biological and technological settings, peptide assembly occurs in the presence of organic and inorganic interfaces with different physicochemical properties. In an attempt to dissect the relative contributions of the different molecular interactions governing amyloid assembly at interfaces, we here present a systematic study of the effects of terminal modifications on the adsorption and assembly of the human islet amyloid polypeptide fragment hIAPP(20-29) at organic self-assembled monolayers (SAMs) presenting different functional groups (cationic, anionic, polar, or hydrophobic). Using a selection of complementary in situ and ex situ analytical techniques, we find that even this well-defined and comparatively simple model system is governed by a rather complex interplay of electrostatic interactions, hydrophobic interactions, and hydrogen bonding, resulting in a plethora of observations and dependencies, some of which are rather counterintuitive. In particular, our results demonstrate that terminal modifications can have tremendous effects on peptide adsorption and assembly dynamics, as well as aggregate morphology and molecular structure. The effects exerted by the terminal modifications can furthermore be modulated in nontrivial ways by the physicochemical properties of the SAM surface. Therefore, terminal modifications are an important factor to consider when conducting and comparing peptide adsorption and aggregation studies and may represent an additional parameter for guiding the assembly of peptide-based nanomaterials.

Computational insights into lipid assisted peptide misfolding and aggregation in neurodegeneration

An overview of recent advances in computational investigation of peptide–lipid interactions in neurodegeneration – Alzheimer's, Parkinson's and Huntington's disease.

Identifying Terminal Assembly Propensity of Amyloidal Peptides by Scanning Tunneling Microscopy

The abnormal accumulation of beta-amyloids (Aβ) in brain is considered as a key initiating cause for Alzheimer's disease (AD) due to their richness in plaques and self-aggregate propensity. In recent studies, N-terminally extended Aβ peptides (NTE-Aβ) with the N-terminus originating prior to the canonical β-secretase cleavage site were found in humans and suggested to have possible relevance to AD. However, the effects of the extended N-terminus on the amyloidegenic structure and aggregation propensity have not been fully elucidated. Herein, we characterized the assembly structures of Aβ1-42, Aβ(-5)-42, Aβ(-10)-42 and Aβ(-15)-42 with both normal and reversed sequences on highly oriented pyrolytic graphite (HOPG) surfaces with scanning tunneling microscopy (STM). The molecularly resolved surface-mediated peptide assemblies enable identification of amyloidegenic fragments. The observations reveal that the assembly propensity of the C-terminal strand of Aβ1-42 is highly conserved and insensitive to N-terminal extensions. In contrast, different assembly structures of the N-terminal strand of Aβ variants can be observed with possible assignment of varied amyloidegenic fragments in the extended N-termini, which may contribute to the varied aggregation propensities of Aβ42 species.

Effect of Cholesterol on Membrane Fluidity and Association of Aβ Oligomers and Subsequent Neuronal Damage: A Double-Edged Sword

Background: The beta-amyloid peptide (Aβ) involved in Alzheimer's disease (AD) has been described to associate/aggregate on the cell surface disrupting the membrane through pore formation and breakage. However, molecular determinants involved for this interaction (e.g., some physicochemical properties of the cell membrane) are largely unknown. Since cholesterol is an important molecule for membrane structure and fluidity, we examined the effect of varying cholesterol content with the association and membrane perforation by Aβ in cultured hippocampal neurons. Methods: To decrease or increase the levels of cholesterol in the membrane we used methyl-β-cyclodextrin (MβCD) and MβCD/cholesterol, respectively. We analyzed if membrane fluidity was affected using generalized polarization (GP) imaging and the fluorescent dye di-4-ANEPPDHQ. Additionally membrane association and perforation was assessed using immunocytochemistry and electrophysiological techniques, respectively. Results: The results showed that cholesterol removal decreased the macroscopic association of Aβ to neuronal membranes (fluorescent-puncta/20 μm: control = 18 ± 2 vs. MβCD = 10 ± 1, p < 0.05) and induced a facilitation of the membrane perforation by Aβ with respect to control cells (half-time for maximal charge transferred: control = 7.2 vs. MβCD = 4.4). Under this condition, we found an increase in membrane fluidity (46 ± 3.3% decrease in GP value, p < 0.001). On the contrary, increasing cholesterol levels incremented membrane rigidity (38 ± 2.7% increase in GP value, p < 0.001) and enhanced the association and clustering of Aβ (fluorescent-puncta/20 μm: control = 18 ± 2 vs. MβCD = 10 ± 1, p < 0.01), but inhibited membrane disruption. Conclusion: Our results strongly support the significance of plasma membrane organization in the toxic effects of Aβ in hippocampal neurons, since fluidity can regulate distribution and insertion of the Aβ peptide in the neuronal membrane.

Impact of membrane curvature on amyloid aggregation

The misfolding, amyloid aggregation, and fibril formation of intrinsically disordered proteins/peptides (or amyloid proteins) have been shown to cause a number of disorders. The underlying mechanisms of amyloid fibrillation and structural properties of amyloidogenic precursors, intermediates, and amyloid fibrils have been elucidated in detail; however, in-depth examinations on physiologically relevant contributing factors that induce amyloidogenesis and lead to cell death remain challenging. A large number of studies have attempted to characterize the roles of biomembranes on protein aggregation and membrane-mediated cell death by designing various membrane components, such as gangliosides, cholesterol, and other lipid compositions, and by using various membrane mimetics, including liposomes, bicelles, and different types of lipid-nanodiscs. We herein review the dynamic effects of membrane curvature on amyloid generation and the inhibition of amyloidogenic proteins and peptides, and also discuss how amyloid formation affects membrane curvature and integrity, which are key for understanding relationships with cell death. Small unilamellar vesicles with high curvature and large unilamellar vesicles with low curvature have been demonstrated to exhibit different capabilities to induce the nucleation, amyloid formation, and inhibition of amyloid-β peptides and α-synuclein. Polymorphic amyloidogenesis in small unilamellar vesicles was revealed and may be viewed as one of the generic properties of interprotein interaction-dominated amyloid formation. Several mechanical models and phase diagrams are comprehensively shown to better explain experimental findings. The negative membrane curvature-mediated mechanisms responsible for the toxicity of pancreatic β cells by the amyloid aggregation of human islet amyloid polypeptide (IAPP) and binding of the precursors of the semen-derived enhancer of viral infection (SEVI) are also described. The curvature-dependent binding modes of several types of islet amyloid polypeptides with high-resolution NMR structures are also discussed.

Effect of Cholesterol on Membrane Fluidity and Association of Aβ Oligomers and Subsequent Neuronal Damage: A Double-Edged Sword

Background: The beta-amyloid peptide (Aβ) involved in Alzheimer's disease (AD) has been described to associate/aggregate on the cell surface disrupting the membrane through pore formation and breakage. However, molecular determinants involved for this interaction (e.g., some physicochemical properties of the cell membrane) are largely unknown. Since cholesterol is an important molecule for membrane structure and fluidity, we examined the effect of varying cholesterol content with the association and membrane perforation by Aβ in cultured hippocampal neurons. Methods: To decrease or increase the levels of cholesterol in the membrane we used methyl-β-cyclodextrin (MβCD) and MβCD/cholesterol, respectively. We analyzed if membrane fluidity was affected using generalized polarization (GP) imaging and the fluorescent dye di-4-ANEPPDHQ. Additionally membrane association and perforation was assessed using immunocytochemistry and electrophysiological techniques, respectively. Results: The results showed that cholesterol removal decreased the macroscopic association of Aβ to neuronal membranes (fluorescent-puncta/20 μm: control = 18 ± 2 vs. MβCD = 10 ± 1, p < 0.05) and induced a facilitation of the membrane perforation by Aβ with respect to control cells (half-time for maximal charge transferred: control = 7.2 vs. MβCD = 4.4). Under this condition, we found an increase in membrane fluidity (46 ± 3.3% decrease in GP value, p < 0.001). On the contrary, increasing cholesterol levels incremented membrane rigidity (38 ± 2.7% increase in GP value, p < 0.001) and enhanced the association and clustering of Aβ (fluorescent-puncta/20 μm: control = 18 ± 2 vs. MβCD = 10 ± 1, p < 0.01), but inhibited membrane disruption. Conclusion: Our results strongly support the significance of plasma membrane organization in the toxic effects of Aβ in hippocampal neurons, since fluidity can regulate distribution and insertion of the Aβ peptide in the neuronal membrane.

Factors affecting the physical stability (aggregation) of peptide therapeutics

The number of biological therapeutic agents in the clinic and development pipeline has increased dramatically over the last decade and the number will undoubtedly continue to increase in the coming years. Despite this fact, there are considerable challenges in the development, production and formulation of such biologics particularly with respect to their physical stabilities. There are many cases where self-association to form either amorphous aggregates or highly structured fibrillar species limits their use. Here, we review the numerous factors that influence the physical stability of peptides including both intrinsic and external factors, wherever possible illustrating these with examples that are of therapeutic interest. The effects of sequence, concentration, pH, net charge, excipients, chemical degradation and modification, surfaces and interfaces, and impurities are all discussed. In addition, the effects of physical parameters such as pressure, temperature, agitation and lyophilization are described. We provide an overview of the structures of aggregates formed, as well as our current knowledge of the mechanisms for their formation.

Membrane-Accelerated Amyloid-β Aggregation and Formation of Cross-β Sheets

Amyloid- β aggregates play a causative role in Alzheimer's disease. These aggregates are a product of the physical environment provided by the basic neuronal membrane, composed of a lipid bilayer. The intrinsic properties of the lipid bilayer allow amyloid- β peptides to nucleate and form well-ordered cross- β sheets within the membrane. Here, we correlate the aggregation of the hydrophobic fragment of the amyloid- β protein, A β 25 - 35 , with the hydrophobicity, fluidity, and charge density of a lipid bilayer. We summarize recent biophysical studies of model membranes and relate these to the process of aggregation in physiological systems.

TiO2 Nanoparticles as Potential Promoting Agents of Fibrillation of α-Synuclein, a Parkinson's Disease-Related Protein

Background: In recent years, nanomaterials have been widely used in large quantities which make people be more frequently exposed to the chemically synthesized nanoparticles (NPs). When NPs are introduced into an organism, they may interact with a variety of cellular components with yet largely unknown pathological consequences. Objective: It was found that NPs enhance the rate of protein fibrillation in the brain by decreasing the lag time for nucleation. Protein fibrillation is implicated in the pathogenesis of the several neurodegenerative diseases such as Parkinson's disease (PD). α-Synuclein (αS) is natively an unfolded protein which is involved in the pathogenesis of PD. In the present study, we have analyzed the effects of three different NPs on αS fibrillation. Materials and Methods: αS protein expression and purifi cation was done and fibrils formation was induced in the absence or presence of the three types of NPs (i. e., TiO2, SiO2, and SnO2). The enhancement of the fluorescence emission of Thiofl avin T (ThT) and transmission electron microscopy (TEM) were used to monitor the appearance and growth of the fibrils. The adsorption of αS monomers on the surface of NPs was investigated by tyrosine fluorescence emission measurements. Results: We found that TiO2-NPs enhances αS fibril formation even at a concentration of 5 μg.mL^-1, while the two other NPs show no significant effect on the kinetics of the fibrillation. Intrinsic tyrosine emission measurement has confirmed that the TiO2-NPs interact with αS fibrillation products. It is suggested that TiO2- NPs may enhance the nucleation of αS protein that leads to protein fibril formation. Conclusion: The fibrillization process of αS protein is profoundly affected by the presence of TiO2-NPs. This finding unveils the neurotoxicity potential of the TiO2-NPs, which may be considered as a probable risk for PD.

The pH-dependent assembly of Chaplin E from Streptomyces coelicolor

Chaplin E, is one of five self-assembling peptides secreted by Streptomyces coelicolor that assist aerial growth by lowering the surface tension of water. Although the surface activity of a mixture of chaplin peptides has observed to depend on pH, it is unclear how the solvent environment (i.e. pH) influences the structure, assembly and subsequent functionality of these individual peptides. In this study, the conformation and fibril forming propensity of the Chaplin E peptide was assessed as a function of pH using a combination of experimental measurements and molecular dynamics simulations. At an acidic pH of 3.0, Chaplin E retained a random coil structure, whereas at the isoelectric point of 6.7 or a basic pH of 10.0, Chaplin E rapidly formed amyloid fibrils rich in β-sheet structure with high efficiency (>93%). Molecular dynamics simulations indicate the persistence of greater α-helical content at the N-terminus at high pH; this is likely partly due to the lack of electrostatic repulsion between residues His6 and Lys10. Since fibril formation was observed at high but not at low pH, we propose that the presence of an N-terminal α-helix in the monomeric form of Chaplin E is required for aggregation and conversion to β-amyloid fibrils. The pH sensitivity of Chaplin E peptide structure provides a route to control peptide assembly and may be important for the physiological function of this peptide, as a surface active agent in the transition from vegetative to aerial growth and could assist Streptomyces coelicolor in response to environmental fluctuations in pH.

Influence of gold nanoparticle surface chemistry and diameter upon Alzheimer's disease amyloid-β protein aggregation

Background

Deposits of aggregated amyloid-β protein (Aβ) are a pathological hallmark of Alzheimer’s disease (AD). Thus, one therapeutic strategy is to eliminate these deposits by halting Aβ aggregation. While a variety of possible aggregation inhibitors have been explored, only nanoparticles (NPs) exhibit promise at low substoichiometric ratios. With tunable size, shape, and surface properties, NPs present an ideal platform for rationally designed Aβ aggregation inhibitors. In this study, we characterized the inhibitory capabilities of gold nanospheres exhibiting different surface coatings and diameters.

Results

Both NP diameter and surface chemistry were found to modulate the extent of aggregation, while NP electric charge influenced aggregate morphology. Notably, 8 nm and 18 nm poly(acrylic acid)-coated NPs abrogated Aβ aggregation at a substoichiometric ratio of 1:2,000,000. Theoretical calculations suggest that this low stoichiometry could arise from altered solution conditions near the NP surface. Specifically, local solution pH and charge density are congruent with conditions that influence aggregation.

Conclusions

These findings demonstrate the potential of surface-coated gold nanospheres to serve as tunable therapeutic agents for the inhibition of Aβ aggregation. Insights gained into the physiochemical properties of effective NP inhibitors will inform future rational design of effective NP-based therapeutics for AD.

Electronic supplementary material

The online version of this article (doi:10.1186/s13036-017-0047-6) contains supplementary material, which is available to authorized users.

How Do Gyrating Beads Accelerate Amyloid Fibrillization?

The chemical and physical mechanisms by which gyrating beads accelerate amyloid fibrillization in microtiter plate assays are unclear. Identifying these mechanisms will help optimize high-throughput screening assays for molecules and mutations that modulate aggregation and might explain why different research groups report different rates of aggregation for identical proteins. This article investigates how the rate of superoxide dismutase-1 (SOD1) fibrillization is affected by 12 different beads with a wide range of hydrophobicity, mass, stiffness, and topology but identical diameter. All assays were performed on D90A apo-SOD1, which is a stable and wild-type-like variant of SOD1. The most significant and uniform correlation between any material property of each bead and that bead's effect on SOD1 fibrillization rate was with regard to bead mass. A linear correlation existed between bead mass and rate of fibril elongation (R2 = 0.7): heavier beads produced faster rates and shorter fibrils. Nucleation rates (lag time) also correlated with bead mass, but only for non-polymeric beads (i.e., glass, ceramic, metallic). The effect of bead mass on fibrillization correlated (R2 = 0.96) with variations in buoyant forces and contact forces (between bead and microplate well), and was not an artifact of residual momentum during intermittent gyration. Hydrophobic effects were observed, but only for polymeric beads: lag times correlated negatively with contact angle of water and degree of protein adhesion (surface adhesion and hydrophobic effects were negligible for non-polymeric beads). These results demonstrate that contact forces (alone) explain kinetic variation among non-polymeric beads, whereas surface hydrophobicity and contact forces explain kinetic variation among polymeric beads. This study also establishes conditions for high-throughput amyloid assays of SOD1 that enable the control over fibril morphologies and produce eightfold faster lag times and fourfold less stochasticity than in previous studies.

Self-Assembly, Dynamics, and Polymorphism of hIAPP(20-29) Aggregates at Solid-Liquid Interfaces

The misfolding and subsequent assembly of proteins and peptides into insoluble amyloid structures play important roles in the development of numerous diseases. The dynamics of self-assembly and the morphology of the resulting aggregates critically depend on various environmental factors and especially on the presence of interfaces. Here, we show in detail how the presence of surfaces with different physicochemical properties influences the assembly dynamics and especially the aggregate morphology of hIAPP(20-29), an amyloidogenic fragment of the peptide hormone human islet amyloid polypeptide (hIAPP), which is involved in the development of type 2 diabetes. Time-lapse atomic force microscopy is employed to study the assembly dynamics of hIAPP(20-29) and the morphology of the resulting aggregates in bulk solution as well as at hydrophilic and hydrophobic model surfaces. We find that the presence of hydrophilic mica surfaces promotes fibrillation when compared with the assembly in bulk solution and results in a more pronounced polymorphism. Three fibrillar species are found to coexist on the mica surface, that is, straight, coiled, and ribbon-like fibrils, whereas only the straight and coiled fibrils are observed in bulk solution after comparable incubation times. In addition, the straight and coiled fibrils assembled at the mica surface have significantly different dimensions compared with those assembled in bulk solution. The three fibrillar species found on the mica surface most likely form independently by lateral association of arbitrary numbers of protofibrils with about 2 nm height. On hydrophobic hydrocarbon surfaces, fibrillation is retarded but not completely suppressed, in contrast to previous observations for full-length hIAPP(1-37). Our results show that peptide-surface interactions may induce diverse, peptide-specific alterations of amyloid assembly dynamics and fibrillar polymorphism. They may therefore contribute to a deeper understanding of the molecular processes that govern amyloid aggregation at different surfaces.

Peptides derived from α-lactalbumin membrane binding helices oligomerize in presence of lipids and disrupt bilayers

Helix A and -C of α-lactalbumin, a loosely folded amphitropic protein, perturb lipid monolayers by the formation of amyloid pore-like structures. To investigate whether these helices are able to disrupt fully formed bilayers, we designed peptides comprised of Helix A and -C, and investigated their membrane-perturbing properties. The peptides, designated A-Cage-C and A-Lnk-C, were prepared with tryptophan sites in the helical and the spacer segments in order to monitor which part were involved in membrane association under given conditions. The peptides associate with and disrupt negatively charged bilayers in a pH-dependent manner and α-helical tendencies increased upon membrane association. Both helices and the spacer segment were involved in membrane binding in the case of A-Lnk-C, and there are indications that the two helixes act in synergy to affect the membrane. However, the helices and the spacer segment could not intercalate when present as A-Cage-C at neutral conditions. At acidic pH, both helices could intercalate, but not the central spacer segment. AFM performed on bilayers under aqueous conditions revealed oligomers formed by the peptides. The presence of bilayers and acidic pHs were both drivers for the formation of these, suggestive of models for peptide oligomerization where segments of the peptide are stacked in an electrostatically favorable manner by the surface. Of the two peptides, A-Lnk-C was the more prolific oligomerizer, and also formed amyloid-fibril like structures at acidic pH and elevated concentrations. Our results suggest the peptides perturb membranes not through pore-like structures, but possibly by a thinning mechanism.

Model membrane size-dependent amyloidogenesis of Alzheimer's amyloid-β peptides

We herein report the mechanism of amyloid formation of amyloid-β (Aβ) peptides on small (SUV) and large unilamellar vesicles (LUVs), which consist of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipids.

Protein/Peptide Aggregation and Amyloidosis on Biointerfaces

Recently, studies of protein/peptide aggregation, particularly the amyloidosis, have attracted considerable attention in discussions of the pathological mechanisms of most neurodegenerative diseases. The protein/peptide aggregation processes often occur at the membrane-cytochylema interface in vivo and behave differently from those occurring in bulk solution, which raises great interest to investigate how the interfacial properties of artificial biomaterials impact on protein aggregation. From the perspective of bionics, current progress in this field has been obtained mainly from four aspects: (1) hydrophobic-hydrophilic interfaces; (2) charged surface; (3) chiral surface; and (4) biomolecule-related interfaces. The specific physical and chemical environment provided by these interfaces is reported to strongly affect the adsorption of proteins, transition of protein conformation, and diffusion of proteins on the biointerface, all of which are ultimately related to protein assembly. Meanwhile, these compelling results of in vitro experiments can greatly promote the development of early diagnostics and therapeutics for the relevant neurodegenerative diseases. This paper presents a brief review of these appealing studies, and particular interests are placed on weak interactions (i.e., hydrogen bonding and stereoselective interactions) that are also non-negligible in driving amyloid aggregation at the interfaces. Moreover, this paper also proposes the future perspectives, including the great opportunities and challenges in this field as well.

Europium as an inhibitor of Amyloid-β(1-42) induced membrane permeation

•

Europium ions complex with GM1 gangliosides in phospholipid membranes.

•

Europium ions cause inhibition Aβ–membrane interactions.

•

Europium blocks an Aβ receptor protecting against membrane permeation.

•

Discrete Aβ binding events correlate to specific membrane permeation events.

Soluble Amyloid-beta (Aβ) oligomers are a source of cytotoxicity in Alzheimer’s disease (AD). The toxicity of Aβ oligomers may arise from their ability to interact with and disrupt cellular membranes mediated by GM1 ganglioside receptors within these membranes. Therefore, inhibition of Aβ–membrane interactions could provide a means of preventing the toxicity associated with Aβ. Here, using Surface Plasmon field-enhanced Fluorescence Spectroscopy, we determine that the lanthanide, Europium III chloride (Eu³⁺), strongly binds to GM1 ganglioside-containing membranes and prevents the interaction with Aβ42 leading to a loss of the peptides ability to cause membrane permeation. Here we discuss the molecular mechanism by which Eu³⁺ inhibits Aβ42-membrane interactions and this may lead to protection of membrane integrity against Aβ42 induced toxicity.

A coarse-grained model for peptide aggregation on a membrane surface

The aggregation of peptides on a lipid bilayer is studied using coarse-grained molecular dynamics in implicit solvent. Peptides bind to and self-assemble on the membrane surface into β-rich fibrillar aggregates, even under conditions where only disordered oligomers form in bulk solution. Relative to a solid surface, the membrane surface facilitates peptide mobility and a more complex network of morphology transitions as aggregation proceeds. Additionally, final aggregate structures realized on the membrane surface are distinct from those observed on a comparable solid surface. The aggregated fibrils alter the local structure and material properties of the lipid bilayer in their immediate vicinity but have only a modest effect on the overall bending rigidity of the bilayer.

Characterization of large amyloid fibers and tapes with Fourier transform infrared (FT-IR) and Raman spectroscopy

Amyloids are self-assembled protein structures implicated in a host of neurodegenerative diseases. Organisms can also produce "functional amyloids" to perpetuate life, and these materials serve as models for robust biomaterials. Amyloids are typically studied using fluorescent dyes, Fourier transform infrared (FT-IR), or Raman spectroscopy analysis of the protein amide I region, and X-ray diffraction (XRD) because the self-assembled β-sheet secondary structure of the amyloid can be easily identified with these techniques. Here, FT-IR and Raman spectroscopy analyses are described to characterize amyloid structures beyond just identification of the β-sheet structure. It has been shown that peptide mixtures can self-assemble into nanometer-sized amyloid structures that then continue to self-assemble to the micrometer scale. The resulting structures are flat tapes of low rigidity or cylinders of high rigidity depending on the peptides in the mixture. By monitoring the aggregation of peptides in solution using FT-IR spectroscopy, it is possible to identify specific amino acids implicated in β-sheet formation and higher order self-assembly. It is also possible to predict the final tape or cylinder morphology and gain insight into the structure's physical properties based on observed intermolecular interactions during the self-assembly process. Tapes and cylinders are shown to both have a similar core self-assembled β-sheet structure. Soft tapes also have weak hydrophobic interactions between alanine, isoleucine, leucine, and valine that facilitate self-assembly. Rigid cylinders have similar hydrophobic interactions that facilitate self-assembly and also have extensive hydrogen bonding between glutamines. Raman spectroscopy performed on the dried tapes and fibers shows the persistence of these interactions. The spectroscopic analyses described could be generalized to other self-assembling amyloid systems to explain property and morphological differences.

Single-molecule resolution of protein structure and interfacial dynamics on biomaterial surfaces

A method was developed to monitor dynamic changes in protein structure and interfacial behavior on surfaces by single-molecule Förster resonance energy transfer. This method entails the incorporation of unnatural amino acids to site-specifically label proteins with single-molecule Förster resonance energy transfer probes for high-throughput dynamic fluorescence tracking microscopy on surfaces. Structural changes in the enzyme organophosphorus hydrolase (OPH) were monitored upon adsorption to fused silica (FS) surfaces in the presence of BSA on a molecule-by-molecule basis. Analysis of >30,000 individual trajectories enabled the observation of heterogeneities in the kinetics of surface-induced OPH unfolding with unprecedented resolution. In particular, two distinct pathways were observed: a majority population (∼ 85%) unfolded with a characteristic time scale of 0.10 s, and the remainder unfolded more slowly with a time scale of 0.7 s. Importantly, even after unfolding, OPH readily desorbed from FS surfaces, challenging the common notion that surface-induced unfolding leads to irreversible protein binding. This suggests that protein fouling of surfaces is a highly dynamic process because of subtle differences in the adsorption/desorption rates of folded and unfolded species. Moreover, such observations imply that surfaces may act as a source of unfolded (i.e., aggregation-prone) protein back into solution. Continuing study of other proteins and surfaces will examine whether these conclusions are general or specific to OPH in contact with FS. Ultimately, this method, which is widely applicable to virtually any protein, provides the framework to develop surfaces and surface modifications with improved biocompatibility.

Protein fibrillation and nanoparticle interactions: opportunities and challenges

Due to their ultra-small size, nanoparticles (NPs) have distinct properties compared with the bulk form of the same materials. These properties are rapidly revolutionizing many areas of medicine and technology. NPs are recognized as promising and powerful tools to fight against the human brain diseases such as multiple sclerosis or Alzheimer's disease. In this review, after an introductory part on the nature of protein fibrillation and the existing approaches for its investigations, the effects of NPs on the fibrillation process have been considered. More specifically, the role of biophysicochemical properties of NPs, which define their affinity for protein monomers, unfolded monomers, oligomers, critical nuclei, and other prefibrillar states, together with their influence on protein fibrillation kinetics has been described in detail. In addition, current and possible-future strategies for controlling the desired effect of NPs and their corresponding effects on the conformational changes of the proteins, which have significant roles in the fibrillation process, have been presented.

β-sheet propensity controls the kinetic pathways and morphologies of seeded peptide aggregation

The effect of seeds in templating the morphology of peptide aggregates is examined using molecular dynamics simulations and a coarse-grained peptide representation. Varying the nature of the aggregate seed between β-sheet, amorphous, and β-barrel seeds leads to different aggregation pathways and to morphologically different aggregates. Similar effects are seen by varying the β-sheet propensity of the free peptides. For a fibrillar seed and free peptides of high β-sheet propensity, fibrillar growth occurred by means of direct attachment (without structural rearrangement) of free individual peptides and small ordered oligomers onto the seed. For a fibrillar seed and free peptides of low β-sheet propensity, fibrillar growth occurred through a dock-lock mechanism, in which the free peptides first docked onto the seed, and then locked on, extending and aligning to join the fibril. Amorphous seeds absorbed free peptides into themselves indiscriminately, with any fibrillar rearrangement subsequent to this absorption by means of a condensation-ordering transition. Although the mechanisms observed by varying peptide β-sheet propensity are diverse, the initial pathways can always be broken down into the following steps: (i) the free peptides diffuse in the bulk and attach individually to the seed; (ii) the free peptides diffuse and aggregate among themselves; (iii) the free peptide oligomers collide with the seed; and (iv) the free oligomers merge with the seed and rearrange in a manner dependent on the backbone flexibility of both the free and seed peptides. Our simulations indicate that it is possible to sequester peptides from amorphous aggregates into fibrils, and also that aggregate morphology (and thus cytoxicity) can be controlled by introducing seeds of aggregate-compatible peptides with differing β-sheet propensities into the system.

Biophysical insights into how surfaces, including lipid membranes, modulate protein aggregation related to neurodegeneration

There are a vast number of neurodegenerative diseases, including Alzheimer’s disease (AD), Parkinson’s disease (PD), and Huntington’s disease (HD), associated with the rearrangement of specific proteins to non-native conformations that promotes aggregation and deposition within tissues and/or cellular compartments. These diseases are commonly classified as protein-misfolding or amyloid diseases. The interaction of these proteins with liquid/surface interfaces is a fundamental phenomenon with potential implications for protein-misfolding diseases. Kinetic and thermodynamic studies indicate that significant conformational changes can be induced in proteins encountering surfaces, which can play a critical role in nucleating aggregate formation or stabilizing specific aggregation states. Surfaces of particular interest in neurodegenerative diseases are cellular and subcellular membranes that are predominately comprised of lipid components. The two-dimensional liquid environments provided by lipid bilayers can profoundly alter protein structure and dynamics by both specific and non-specific interactions. Importantly for misfolding diseases, these bilayer properties can not only modulate protein conformation, but also exert influence on aggregation state. A detailed understanding of the influence of (sub)cellular surfaces in driving protein aggregation and/or stabilizing specific aggregate forms could provide new insights into toxic mechanisms associated with these diseases. Here, we review the influence of surfaces in driving and stabilizing protein aggregation with a specific emphasis on lipid membranes.

Initial stages of beta-amyloid Aβ1-40 and Aβ1-42 oligomerization observed using fluorescence decay and molecular dynamics analyses of tyrosine

The development of Alzheimer's disease is associated with the aggregation of the beta-amyloid peptides Aβ_1-40 and Aβ_1-42. It is believed that the small oligomers formed during the early stages of the aggregation are neurotoxic and involved in the process of neurodegeneration. In this paper we use fluorescence decay measurements of beta-amyloid intrinsic fluorophore tyrosine (Tyr) and molecular dynamics (MD) simulations to study the early stages of oligomer formation for the Aβ_1-40 and Aβ_1-42 peptides in vitro. We demonstrate that the lifetime distributions of the amyloid fluorescence decay efficiently describe changes in the complex Tyr photophysics during the peptide aggregation and highlight the differences in aggregation performance of the two amyloids. Tyr fluorescence decay is found to be a more sensitive sensor of Aβ_1-40 aggregation than Aβ_1-42 aggregation. The MD simulation of the peptide aggregation is compared with the experimental data and supports a four-rotamer model of Tyr.

Human insulin adsorption kinetics, conformational changes and amyloidal aggregate formation on hydrophobic surfaces

The formation of insulin amyloidal aggregates on material surfaces is a well-known phenomenon with important pharmaceutical and medical implications. Using surface plasmon resonance imaging, we monitor insulin adsorption on model hydrophobic surfaces in real time. Insulin adsorbs in two phases: first, a very fast phase (less than 1 min), where a protein monolayer forms, followed by a slower one that can last for at least 1h, where multilayered protein aggregates are present. The dissociation kinetics reveals the presence of two insulin populations that slowly interconvert: a rapidly dissociating pool and a pool of strongly bound insulin aggregates. After 1h of contact between the protein solution and the surface, the adsorbed insulin has practically stopped dissociating from the surface. The conformation of adsorbed insulin is probed by attenuated total reflection-Fourier transform infrared spectroscopy. Characteristic shifts in the amide A and amide II' bands are associated with insulin adsorption. The amide I band is also distinct from that of soluble or aggregated insulin, and it slowly evolves in time. A 1708 cm⁻¹ peak is observed, which characterizes insulin adsorbed for times longer than 30 min. Finally, Thioflavin T, a marker of extended β-sheet structures present in amyloid fibers, binds to adsorbed insulin after 30-40 min. Altogether, these results reveal that the conformational change induced in insulin upon binding to hydrophobic surfaces allows further insulin binding from the solution. Adsorbed insulin is thus an intermediate along the α-to-β structural transition that results in the formation of amyloidal fibers on these material surfaces.

Kinetic pathways to peptide aggregation on surfaces: the effects of β-sheet propensity and surface attraction

Mechanisms of peptide aggregation on hydrophobic surfaces are explored using molecular dynamics simulations with a coarse-grained peptide representation. Systems of peptides are studied with varying degrees of backbone rigidity (a measure of β-sheet propensity) and degrees of attraction between their hydrophobic residues and the surface. Multiple pathways for aggregation are observed, depending on the surface attraction and peptide β-sheet propensity. For the case of a single-layered β-sheet fibril forming on the surface (a dominant structure seen in all simulations), three mechanisms are observed: (a) a condensation-ordering transition where a bulk-formed amorphous aggregate binds to the surface and subsequently rearranges to form a fibril; (b) the initial formation of a single-layered fibril in the bulk depositing flat on the surface; and (c) peptides binding individually to the surface and nucleating fibril formation by individual peptide deposition. Peptides with a stiffer chiral backbone prefer mechanism (b) over (a), and stronger surface attractions prefer mechanism (c) over (a) and (b). Our model is compared to various similar experimental systems, and an agreement was found in terms of the surface increasing the degree of fibrillar aggregation, with the directions of fibrillar growth matching the crystallographic symmetry of the surface. Our simulations provide details of aggregate growth mechanisms on scales inaccessible to either experiment or atomistic simulations.

Surface chemistry at the nanometer scale influences insulin aggregation

We synthesized surfaces with different hydrophobicities and roughness by forming self-assembled monolayers (SAMs) of mixed amine and octyl silanes. Insulin aggregation kinetics in the presence of the above surfaces is characterized by a typical lag phase and growth rate. We show that the lag time but not the growth rate varies as a function of the amine fraction on the surface. The amount of adsorbed protein and the adsorption rate during the aggregation process also vary with the amine fraction on the surface and are maximal for equal parts of amine and octyl groups. For all surfaces, the growth phase starts for identical amounts of adsorbed insulin. The initial surface roughness determines the rate at which protein adsorption occurs and hence the time to accumulate enough protein to form aggregation nuclei. In addition, the surface chemistry and topography influence the morphology of aggregates adsorbed on the material surface and the secondary structures of final aggregates released in solution.

Enzyme-linked immunosorbent assay-based method to quantify the association of small molecules with aggregated amyloid peptides

This paper describes a simple enzyme linked immunosorbent assay (ELISA) protocol for quantifying the binding of small molecules to aggregated β-amyloid (Aβ) peptides. Amyloid-targeting small molecules have attracted wide interest as potential agents for the treatment or diagnosis of neurodegenerative disorders such as Alzheimer's disease. The lack of general methods to evaluate small molecule-amyloid binding interactions, however, has significantly limited the number of amyloid-targeting molecules that have been studied to date. Here, we demonstrate a general method to quantify small molecule-amyloid binding interactions via a modified quantitative ELISA protocol. A key feature of this protocol is the treatment of commercial ELISA plates with an air plasma to help maintain the desired β-sheet content of the aggregated Aβ upon immobilization of these peptides on to the polystyrene surface. We developed an ELISA-based competition assay on these air plasma-treated plates and evaluated the binding of five previously known amyloid-binding small molecules to aggregated Aβ. We show that this general ELISA-based competition assay can be used to quantify small molecule-amyloid binding interactions in the low nanomolar to low micromolar range, which is the typical range of affinities for many amyloid-targeting diagnostic agents under current development. This simple protocol for quantifying the interaction of small molecules with aggregated Aβ peptides overcomes many limitations of previously reported spectroscopic or radioactivity assays and may, therefore, facilitate the screening and evaluation of a more structurally diverse set of amyloid-targeting agents than had previously been possible.

The effect of nanoparticles on amyloid aggregation depends on the protein stability and intrinsic aggregation rate

Nanoparticles interfere with protein amyloid formation. Catalysis of the process may occur due to increased local protein concentration and nucleation on the nanoparticle surface, whereas tight binding or a large particle/protein surface area may lead to inhibition of protein aggregation. Here we show a clear correlation between the intrinsic protein stability and the nanoparticle effect on the aggregation rate. The results were reached for a series of five mutants of single-chain monellin differing in intrinsic stability toward denaturation, for which a correlation between protein stability and aggregation propensity has been previously documented by Szczepankiewicz et al. [Mol. Biosyst.20107 (2), 521-532]. The aggregation process was monitored by thioflavin T fluorescence in the absence and presence of copolymeric nanoparticles with different hydrophobic characters. For mutants with a high intrinsic stability and low intrinsic aggregation rate, we find that amyloid fibril formation is accelerated by nanoparticles. For mutants with a low intrinsic stability and high intrinsic aggregation rate, we find the opposite--a retardation of amyloid fibril formation by nanoparticles. Moreover, both catalytic and inhibitory effects are most pronounced with the least hydrophobic nanoparticles, which have a larger surface accessibility of hydrogen-bonding groups in the polymer backbone.

Assisted peptide folding by surface pattern recognition

Natively disordered proteins belong to a unique class of biomolecules whose function is related to their flexibility and their ability to adopt desired conformations upon binding to substrates. In some cases these proteins can bind multiple partners, which can lead to distinct structures and promiscuity in functions. In other words, the capacity to recognize molecular patterns on the substrate is often essential for the folding and function of intrinsically disordered proteins. Biomolecular pattern recognition is extremely relevant both in vivo (e.g., for oligomerization, immune response, induced folding, substrate binding, and molecular switches) and in vitro (e.g., for biosensing, catalysis, chromatography, and implantation). Here, we use a minimalist computational model system to investigate how polar/nonpolar patterns on a surface can induce the folding of an otherwise unstructured peptide. We show that a model peptide that exists in the bulk as a molten globular state consisting of many interconverting structures can fold into either a helix-coil-helix or an extended helix structure in the presence of a complementary designed patterned surface at low hydrophobicity (3.7%) or a uniform surface at high hydrophobicity (50%). However, we find that a carefully chosen surface pattern can bind to and catalyze the folding of a natively unfolded protein much more readily or effectively than a surface with a noncomplementary or uniform distribution of hydrophobic residues.

Influence of hydrophobicity on the surface-catalyzed assembly of the islet amyloid polypeptide

The islet amyloid polypeptide (IAPP) is a hormonal factor secreted by the β-cells in the pancreas. Aggregation of misfolded IAPP molecules and subsequent assembly of amyloid nanofibrils are critical for the development of type 2 diabetes mellitus. In the physiological environment, amyloid aggregation is affected by the presence of interfaces such as cell membranes. The physicochemical properties of the interface dictates the interaction of the peptide with the surface, i.e., electrostatic and hydrophobic interactions on hydrophilic and hydrophobic surfaces, respectively. We have studied the influence of hydrophobicity on the surface-catalyzed assembly of IAPP on ultrasmooth hydrocarbon films grown on ion-beam-modified mica surfaces by atomic force microscopy. The contact angle θ of these surfaces can be tuned continuously in the range from ≤20° to ∼90° by aging the samples without significant changes of the chemical composition or the topography of the surface. On hydrophilic surfaces with a θ of ∼20°, electrostatic interactions induce the assembly of IAPP nanofibrils, whereas aggregation of large (∼2.6 nm) oligomers is observed at hydrophobic surfaces with a θ of ∼90°. At intermediate contact angles, the interplay between electrostatic and hydrophobic substrate interactions dictates the pathway of aggregation with fibrillation getting continuously delayed when the contact angle is increased. In addition, the morphology of the formed protofibrils and mature fibrils at intermediate contact angles differs from those observed at more hydrophilic surfaces. These results might contribute to the understanding of the surface-catalyzed assembly of different amyloid aggregates and may also have implications for the technologically relevant controlled synthesis of amyloid nanofibrils of desired morphology.

Molecular level studies on binding modes of labeling molecules with polyalanine peptides

In this work, the binding modes of typical labeling molecules (thioflavin T (ThT), Congo red (CR) and copper(II) phthalocyanine tetrasulfonic acid tetrasodium salt (PcCu(SO(3)Na)(4))) on pentaalanine, which is a model peptide segment of amyloid peptides, have been resolved at the molecular level by using scanning tunneling microscopy (STM). In the STM images, ThT molecules are predominantly adsorbed parallel to the peptide strands and two binding modes could be identified. It was found that ThT molecules are preferentially binding on top of the peptide strand, and the mode of intercalated between neighboring peptides also exists. The parallel binding mode of CR molecules can be observed with pentaalanine peptides. Besides the binding modes of labeling molecules, the CR and PcCu(SO(3)Na)(4) display different adsorption affinity with the pentaalanine peptides. The results could be beneficial for obtaining molecular level insight of the interactions between labeling molecules and peptides.

Protein-associated water and secondary structure effect removal of blood proteins from metallic substrates

Removing adsorbed protein from metals has significant health and industrial consequences. There are numerous protein-adsorption studies using model self-assembled monolayers or polymeric substrates but hardly any high-resolution measurements of adsorption and removal of proteins on industrially relevant transition metals. Surgeons and ship owners desire clean metal surfaces to reduce transmission of disease via surgical instruments and minimize surface fouling (to reduce friction and corrosion), respectively. A major finding of this work is that, besides hydrophobic interaction adhesion energy, water content in an adsorbed protein layer and secondary structure of proteins determined the access and hence ability to remove adsorbed proteins from metal surfaces with a strong alkaline-surfactant solution (NaOH and 5 mg/mL SDS in PBS at pH 11). This is demonstrated with three blood proteins (bovine serum albumin, immunoglobulin, and fibrinogen) and four transition metal substrates and stainless steel (platinum (Pt), gold (Au), tungsten (W), titanium (Ti), and 316 grade stainless steel (SS)). All the metallic substrates were checked for chemical contaminations like carbon and sulfur and were characterized using X-ray photoelectron spectroscopy (XPS). While Pt and Au surfaces were oxide-free (fairly inert elements), W, Ti, and SS substrates were associated with native oxide. Difference measurements between a quartz crystal microbalance with dissipation (QCM-D) and surface plasmon resonance spectroscopy (SPR) provided a measure of the water content in the protein-adsorbed layers. Hydrophobic adhesion forces, obtained with atomic force microscopy, between the proteins and the metals correlated with the amount of the adsorbed protein-water complex. Thus, the amount of protein adsorbed decreased with Pt, Au, W, Ti and SS, in this order. Neither sessile contact angle nor surface roughness of the metal substrates was useful as predictors here. All three globular proteins behaved similarly on addition of the alkaline-surfactant cleaning solution, in that platinum and gold exhibited an increase, while tungsten, titanium, and stainless steel showed a decrease in weight. According to dissipation measurements with the QCM-D, the adsorbed layer for platinum and gold was rigid, while that for the tungsten, titanium, and stainless steel was much more flexible. The removal efficiency of adsorbed-protein by alkaline solution of SDS depended on the water content of the adsorbed layers for W, Ti, and SS, while for Pt and Au, it depended on secondary structural content. When protein adsorption was high (Pt, Au), protein-protein interactions and protein-surface interactions were dominant and the removal of protein layers was limited. Water content of the adsorbed protein layer was the determining factor for how efficiently the layer was removed by alkaline SDS when protein adsorption was low. Hence, protein-protein and protein-surface interactions were minimal and protein structure was less perturbed in comparison with those for high protein adsorption. Secondary structural content determined the efficient removal of adsorbed protein for high adsorbed amount.