Light-Triggered Concomitant Enhancement of Magnetic Resonance Imaging Contrast Performance and Drug Release Rate of Functionalized Amphiphilic Diblock Copolymer Micelles

Structural Determinants of Stimuli-Responsiveness in Amphiphilic Macromolecular Nano-assemblies

Stimuli-responsive nano-assemblies from amphiphilic macromolecules could undergo controlled structural transformations and generate diverse macroscopic phenomenon under stimuli. Due to the controllable responsiveness, they have been applied for broad material and biomedical applications, such as biologics delivery, sensing, imaging, and catalysis. Understanding the mechanisms of the assembly-disassembly processes and structural determinants behind the responsive properties is fundamentally important for designing the next generation of nano-assemblies with programmable responsiveness. In this review, we focus on structural determinants of assemblies from amphiphilic macromolecules and their macromolecular level alterations under stimuli, such as the disruption of hydrophilic-lipophilic balance (HLB), depolymerization, decrosslinking, and changes of molecular packing in assemblies, which eventually lead to a series of macroscopic phenomenon for practical purposes. Applications of stimuli-responsive nano-assemblies in delivery, sensing and imaging were also summarized based on their structural features. We expect this review could provide readers an overview of the structural considerations in the design and applications of nanoassemblies and incentivize more explorations in stimuli-responsive soft matters.

Current research trends of nanomedicines

Owing to the inherent shortcomings of traditional therapeutic drugs in terms of inadequate therapeutic efficacy and toxicity in clinical treatment, nanomedicine designs have received widespread attention with significantly improved efficacy and reduced non-target side effects. Nanomedicines hold tremendous theranostic potential for treating, monitoring, diagnosing, and controlling various diseases and are attracting an unfathomable amount of input of research resources. Against the backdrop of an exponentially growing number of publications, it is imperative to help the audience get a panorama image of the research activities in the field of nanomedicines. Herein, this review elaborates on the development trends of nanomedicines, emerging nanocarriers, in vivo fate and safety of nanomedicines, and their extensive applications. Moreover, the potential challenges and the obstacles hindering the clinical translation of nanomedicines are also discussed. The elaboration on various aspects of the research trends of nanomedicines may help enlighten the readers and set the route for future endeavors.

Physically stimulus-responsive nanoparticles for therapy and diagnosis

Nanoparticles offer numerous advantages in various fields of science, particularly in medicine. Over recent years, the use of nanoparticles in disease diagnosis and treatments has increased dramatically by the development of stimuli-responsive nano-systems, which can respond to internal or external stimuli. In the last 10 years, many preclinical studies were performed on physically triggered nano-systems to develop and optimize stable, precise, and selective therapeutic or diagnostic agents. In this regard, the systems must meet the requirements of efficacy, toxicity, pharmacokinetics, and safety before clinical investigation. Several undesired aspects need to be addressed to successfully translate these physical stimuli-responsive nano-systems, as biomaterials, into clinical practice. These have to be commonly taken into account when developing physically triggered systems; thus, also applicable for nano-systems based on nanomaterials. This review focuses on physically triggered nano-systems (PTNSs), with diagnostic or therapeutic and theranostic applications. Several types of physically triggered nano-systems based on polymeric micelles and hydrogels, mesoporous silica, and magnets are reviewed and discussed in various aspects.

Tailoring combinatorial lipid nanoparticles for intracellular delivery of nucleic acids, proteins, and drugs

Lipid nanoparticle (LNP)-based drug delivery systems have become the most clinically advanced non-viral delivery technology. LNPs can encapsulate and deliver a wide variety of bioactive agents, including the small molecule drugs, proteins and peptides, and nucleic acids. However, as the physicochemical properties of small- and macromolecular cargos can vary drastically, every LNP carrier system needs to be carefully tailored in order to deliver the cargo molecules in a safe and efficient manner. Our group applied the combinatorial library synthesis approach and in vitro and in vivo screening strategy for the development of LNP delivery systems for drug delivery. In this Review, we highlight our recent progress in the design, synthesis, characterization, evaluation, and optimization of combinatorial LNPs with novel structures and properties for the delivery of small- and macromolecular therapeutics both in vitro and in vivo. These delivery systems have enormous potentials for cancer therapy, antimicrobial applications, gene silencing, genome editing, and more. We also discuss the key challenges to the mechanistic study and clinical translation of new LNP-enabled therapeutics.

Near-infrared light-triggered nano-prodrug for cancer gas therapy

Gas therapy (GT) has attracted increasing attention in recent years as a new cancer treatment method with favorable therapeutic efficacy and reduced side effects. Several gas molecules, such as nitric oxide (NO), carbon monoxide (CO), hydrogen (H2), hydrogen sulfide (H2S) and sulfur dioxide (SO2), have been employed to treat cancers by directly killing tumor cells, enhancing drug accumulation in tumors or sensitizing tumor cells to chemotherapy, photodynamic therapy or radiotherapy. Despite the great progress of gas therapy, most gas molecules are prone to nonspecific distribution when administered systemically, resulting in strong toxicity to normal tissues. Therefore, how to deliver and release gas molecules to targeted tissues on demand is the main issue to be considered before clinical applications of gas therapy. As a specific and noninvasive stimulus with deep penetration, near-infrared (NIR) light has been widely used to trigger the cleavage and release of gas from nano-prodrugs via photothermal or photodynamic effects, achieving the on-demand release of gas molecules with high controllability. In this review, we will summarize the recent progress in cancer gas therapy triggered by NIR light. Furthermore, the prospects and challenges in this field are presented, with the hope for ongoing development.

Stimuli-responsive polymer-based systems for diagnostic applications

Stimuli-responsive polymers exhibit properties that make them ideal candidates for biosensing and molecular diagnostics. Through rational design of polymer composition combined with new polymer functionalization and synthetic strategies, polymers with myriad responsivities, e.g., responses to temperature, pH, biomolecules, CO2, light, and electricity can be achieved. When these polymers are specifically designed to respond to biomarkers, stimuli-responsive devices/probes, capable of recognizing and transducing analyte signals, can be used to diagnose and treat disease. In this review, we highlight recent state-of-the-art examples of stimuli-responsive polymer-based systems for biosensing and bioimaging.

Stimulus-Responsive Nanoparticle Magnetic Resonance Imaging Contrast Agents: Design Considerations and Applications

Magnetic resonance imaging (MRI) has been widely used for disease diagnosis because it can noninvasively obtain anatomical details of various diseases through accurate contrast between soft tissues. Over one-third of MRI examinations are performed with the assistance of contrast agents. Traditional contrast agents typically display an unchanging signal, thus exhibiting relatively low sensitivity and poor specificity. Currently, advances in stimulus-responsive contrast agents which can alter the relaxation signal in response to a specific change in their surrounding environment provide new opportunities to overcome such limitation. The signal changes based on stimulus also reflects the physiological and pathological conditions of the site of interests. In this review, how to design stimulus-responsive nanoparticle MRI contrast agents from the perspective of theory and surface design is comprehensively discussed. Key structural features including size, clusters, shell features, and surface properties are used for tuning the T₁ and T₂ relaxation properties. The reversible or non-reversible signal changes highlight the contrast agents have undergone structural changes based on certain stimulus, as an indication for disease diagnosis or therapeutic efficacy.

Combinatorial Library of Cyclic Benzylidene Acetal-Containing pH-Responsive Lipidoid Nanoparticles for Intracellular mRNA Delivery

Lipidoid nanoparticles have been demonstrated to be effective for intracellular delivery of small molecule drugs, proteins, and nucleic acids. Stimuli-responsive lipidoid nanoparticles are able to further improve delivery efficacy and reduce carrier-induced toxicity. Our group previously developed reduction and photoresponsive combinatorial libraries of lipidoid nanoparticles for small molecule and biologics delivery. Herein, we describe the synthesis, characterization, and intracellular mRNA delivery application of a new library of pH-responsive lipidoid nanoparticles. The acid-degradable cyclic benzylidene acetal-containing cationic lipidoids (R-O16CBA) were synthesized through a multistep reaction and characterized by NMR and MS. The acid-triggered degradation of lipidoids was studied using NMR, MS, DLS, and TEM. The results revealed that the R-O16CBA lipidoid can be completely degraded at pH 5. The R-O16CBA lipidoid nanoparticles were then fabricated with different formulations of DOPE and cholesterol and tested in vitro for intracellular mRNA delivery.

Morphological Transitions of Photoresponsive Vesicles from Amphiphilic Polypeptoid Copolymers for Controlled Release

Photoresponsive polymers have attracted increasing interest for a variety of applications. Here, we report a family of photoresponsive polypeptoid-based copolymer poly(ethylene glycol)-b-poly(N-(S-(o-nitrobenzyl)-thioethyl) glycine)-co-poly(N-(2-phenylethyl) glycine) (PEG-b-PNSN-co-PNPE) synthesized by the controlled ring-opening polymerization (ROP) technique. The key feature of the design is to incorporate both o-nitrobenzyl group moiety to offer the photoresponsive property and phenethyl residues to tune the structural and amphiphilic property of the system. We demonstrate that the cleavage degree of the o-nitrobenzyl group can reach to 100% upon UV-irradiation. With delicate design, a photoresponsive vesicle-to-sphere transition has been observed that facilitates the release of the encapsulants. This work provides a facile approach to prepare a type of photoresponsive polymers with tunable properties for drug delivery.

Thermo-responsive polymers: Applications of smart materials in drug delivery and tissue engineering

Synthetic polymers are attracting great attention in the last decades for their use in the biomedical field as nanovectors for controlled drug delivery, hydrogels and scaffolds enabling cell growth. Among them, polymers able to respond to environmental stimuli have been recently under growing consideration to impart a "smart" behavior to the final product, which is highly desirable to provide it with a specific dynamic and an advanced function. In particular, thermo-responsive polymers, materials able to undergo a discontinuous phase transition or morphological change in response to a temperature variation, are among the most studied. The development of the so-called controlled radical polymerization techniques has paved the way to a high degree of engineering for the polymer architecture and properties, which in turn brought to a plethora of sophisticated behaviors for these polymers by simply switching the external temperature. These can be exploited in many different fields, from separation to advanced optics and biosensors. The aim of this review is to critically discuss the latest advances in the development of thermo-responsive materials for biomedical applications, including a highly controlled drug delivery, mediation of cell growth and bioseparation. The focus is on the structural and design aspects that are required to exploit such materials for cutting-edge applications in the biomedical field.

Polymers, responsiveness and cancer therapy

A single outcome in a biological procedure at the time of cancer therapy is due to multiple changes happening simultaneously. Hence to mimic such complex biological processes, an understanding of stimuli responsiveness is needed to sense specific changes and respond in a predictable manner. Such responses due to polymers may take place either simultaneously at the site or in a sequential manner from preparation to transporting pathways to cellular compartments. The present review comprehends the stimuli-responsive polymers and multi-responsiveness with respect to cancer therapy. It focuses on the exploitation of different stimuli like temperature, pH and enzymes responsiveness in a multi-stimuli setting. Nanogels and micelles being two of the most commonly used responsive polymeric carriers have also been discussed. The role of multiple stimuli delivery system is significant due to multiple changes happening in the near surroundings of cancer cells. These responsive materials are able to mimic some biological processes and recognize at the molecular level itself to manipulate development of custom-designed molecules for targeting cancer cells.

pH-Responsive polyelectrolyte coated gadolinium oxide-doped mesoporous silica nanoparticles (Gd2O3@MSNs) for synergistic drug delivery and magnetic resonance imaging enhancement

Theranostic platforms that combine therapeutic and imaging modalities have received increasing interest.

A photo-degradable injectable self-healing hydrogel based on star poly(ethylene glycol)-b-polypeptide as a potential pharmaceuticals delivery carrier

As one of the most promising biomaterials, injectable self-healing hydrogels have found broad applications in a number of fields such as local drug delivery. However, controlled release of drugs in hydrogels is still difficult to realize up to now. Here, we report a novel photo-degradable injectable self-healing hydrogel based on the hydrophobic interaction of a biocompatible four-arms star polymer, poly(ethylene glycol)-b-poly(γ-o-nitrobenzyl-l-glutamate). The hydrophobic interaction between poly(γ-o-nitrobenzyl-l-glutamate) not only connects poly(ethylene glycol)-b-poly(γ-o-nitrobenzyl-l-glutamate) together with a crosslink but also provides a hydrophobic domain to encapsulate hydrophobic pharmaceuticals such as doxorubicin (DOX). Due to the dynamic character of the hydrophobic interaction, the hydrogel exhibits excellent injectable and self-healing ability. In particular, the photolabile o-nitribenzyl ester group is cleaved under UV irradiation. As a result, the hydrophobic domain transforms into the hydrophilic one and the embedded DOX is released effectively. An increasing release ratio of DOX dramatically enhances the apoptosis ratio of HeLa cells. We expect these attractive properties may be beneficial to practical applications of the hydrogel as an effective local drug delivery means in a truly physiological environment.

Light-responsive Drug Delivery Systems

Materials that interact with light and subsequently change their physicochemical properties are of great interest for drug delivery. The human body is semitransparent to light of the near-infrared (NIR) region, which makes it possible to use light as an external stimulus to trigger drug release. In this chapter, we review light-triggered drug release systems of both photochemical and photothermal mechanisms. We explore recent literature on a variety of light-responsive materials for drug delivery, including organic, inorganic, and hybrid systems, which collectively embody the strategies for synergizing light responsiveness for controlled drug release/activation with other drug delivery techniques.

Facile fabrication of positively-charged helical poly(phenyl isocyanide) modified multi-stimuli-responsive nanoassembly capable of high efficiency cell-penetrating, ratiometric fluorescence imaging, and rapid intracellular drug release

High efficiency cell-penetrating helical chain functionalized polymeric micelles capable of co-delivery of cargoes and rapid release were reported.

Enhancing Photochemical Internalization of DOX through a Porphyrin-based Amphiphilic Block Copolymer

Drug resistance is a primary obstacle that seriously reduces the therapy efficiency of most chemotherapeutic agents. To address this issue, the photochemical internalization (PCI) was employed to help the anticancer drug escape from lysosome and improve their translocation to the nucleus. A pH-sensitive porphyrin-based amphiphilic block copolymer (PEG₁₁₃-b-PCL₅₄-a-porphyrin) was synthesized, which was acted not only as a carrier for the delivery of DOX but also as a photosensitizer for PCI. PEG₁₁₃-b-PCL₅₄-a-porphyrin as a drug carrier exhibited a higher drug loading capacity, entrapment efficiency, and DOX release content. The PCI effect of PEG₁₁₃-b-PCL₅₄-a-porphyrin was studied by confocal laser scanning microscopy, and the results showed that most of DOX could be translocated into the nucleus for DOX-loaded PEG₁₁₃-b-PCL₅₄-a-porphyrin micelles. Moreover, the IC₅₀ of pH-sensitive DOX-loaded PEG₁₁₃-b-PCL₅₄-a-porphyrin micelles was much lower than that of its counterpart without pH-responsiveness, DOX-loaded PEG₁₁₃-b-PCL₅₄-porphyrin micelles. Therefore, this drug delivery system based on pH-sensitive porphyrin-containing block copolymer would act as a potential vehicle for overcoming drug resistance in chemotherapy.

Micellization of Photo-Responsive Block Copolymers

This review focuses on block copolymers featuring different photo-responsive building blocks and self-assembly of such materials in different selective solvents. We have subdivided the specific examples we selected: (1) according to the wavelength at which the irradiation has to be carried out to achieve photo-response; and (2) according to whether irradiation with light of a suitable wavelength leads to reversible or irreversible changes in material properties (e.g., solubility, charge, or polarity). Exemplarily, an irreversible change could be the photo-cleavage of a nitrobenzyl, pyrenyl or coumarinyl ester, whereas the photo-mediated transition between spiropyran and merocyanin form as well as the isomerization of azobenzenes would represent reversible response to light. The examples presented cover applications including drug delivery (controllable release rates), controlled aggregation/disaggregation, sensing, and the preparation of photochromic hybrid materials.

Gadolinium-based nanoscale MRI contrast agents for tumor imaging

Gadolinium-based nanoscale magnetic resonance imaging (MRI) contrast agents (CAs) have gained significant momentum as a promising nanoplatform for detecting tumor tissue in medical diagnosis, due to their favorable capability of enhancing the longitudinal relaxivity (r₁) of individual gadolinium ions, delivering to the region of interest a large number of gadolinium ions, and incorporating different functionalities. This mini-review highlights the latest developments and applications, and simultaneously gives some perspectives for their future development.

Photo-responsive polymers: synthesis and applications

Photo-responsive polymers are able to change their structure, conformation and properties upon light irradiation.

Photo- and thermo-responsive multicompartment hydrogels for synergistic delivery of gemcitabine and doxorubicin

Hydrogels have found promising applications in drug delivery due to their biocompatibility, high drug loading capability, and tunable release profiles. However, hydrogel-based carriers are primarily employed for delivering hydrophilic payloads while hydrophobic drugs cannot be efficiently delivered due to the lack of hydrophobic domains within conventional hydrogel matrices. Herein, we report that thermo- and photo-responsive hydrogels could be constructed from amphiphilic triblock copolymers, poly(N-isopropylacrylamide)-b-poly(4-acryloylmorpholine)-b-poly(2-((((2-nitrobenzyl)oxy)carbonyl) amino)ethyl methacrylate) (PNIPAM-b-PNAM-b-PNBOC), and the resulting hydrogels could be further engineered a new carrier for both hydrophilic gemcitabine (GCT) and hydrophobic doxorubicin (DOX). PNIPAM-b-PNAM-b-PNBOC triblock copolymers were first self-assembled into micelles with hydrophobic photosensitive PNBOC cores, hydrophilic PNAM inner shells, and thermoresponsive PNIPAM coronas below the lower critical solution temperature (LCST), while hydrogels of physically cross-linked micellar nanoparticles were achieved at elevated polymer concentrations and high temperatures above the critical gelation temperature (CGT). Rheological experiments revealed that the CGT was highly dependent on polymer compositions and concentrations, that is, a longer hydrophobic PNBOC block or a higher polymer concentration led to a decreased CGT. However, the CGT prior to UV irradiation (CGT₀) could be drastically elevated after UV irradiation (CGT_UV) as a result of UV irradiation-induced concurrently cross-linking and hydrophobic-to-hydrophilic transition within PNBOC cores. As such, gel-to-sol transition could be accomplished by either temperature decrease or exposure to UV irradiation at a fixed temperature lower than the CGT_UV. Note that both GCT and DOX could be simultaneously encapsulated into the hydrogels due to the coexistence of extramicellar aqueous phase and hydrophobic micellar cores. Intriguingly, the subsequent co-release of GCT and DOX could be regulated by taking advantage of either temperature or UV irradiation-mediated gel-to-sol transitions.

Stimuli-Responsive Block Copolymer-Based Assemblies for Cargo Delivery and Theranostic Applications

Although a number of tactics towards the fabrication and biomedical exploration of stimuli-responsive polymeric assemblies being responsive and adaptive to various factors have appeared, the controlled preparation of assemblies with well-defined physicochemical properties and tailor-made functions are still challenges. These responsive polymeric assemblies, which are triggered by stimuli, always exhibited reversible or irreversible changes in chemical structures and physical properties. However, simple drug/polymer nanocomplexes cannot deliver or release drugs into the diseased sites and cells on-demand due to the inevitable biological barriers. Hence, utilizing therapeutic or imaging agents-loaded stimuli-responsive block copolymer assemblies that are responsive to tumor internal microenvironments (pH, redox, enzyme, and temperature, etc.) or external stimuli (light and electromagnetic field, etc.) have emerged to be an important solution to improve therapeutic efficacy and imaging sensitivity through rationally designing as well as self-assembling approaches. In this review, we summarize a portion of recent progress in tumor and intracellular microenvironment responsive block copolymer assemblies and their applications in anticancer drug delivery and triggered release and enhanced imaging sensitivity. The outlook on future developments is also discussed. We hope that this review can stimulate more revolutionary ideas and novel concepts and meet the significant interest to diverse readers.

A thermo- and pH-responsive poly(N-isopropylacrylamide)–Mn–ZnS nanocomposite for controlled release and real-time photoluminescence tracking of doxorubicin

A novel multifunctional poly(N-isopropylacrylamide)–Mn–ZnS (PMZS) nanocomposite was developed as a smart drug carrier for thermo- and pH-controlled release of doxorubicin (Dox) and real-time photoluminescence tracking of the released Dox.

Photoresponsive nanoparticles for drug delivery

Externally triggerable drug delivery systems provide a strategy for the delivery of therapeutic agents preferentially to a target site, presenting the ability to enhance therapeutic efficacy while reducing side effects. Light is a versatile and easily tuned external stimulus that can provide spatiotemporal control. Here we will review the use of nanoparticles in which light triggers drug release or induces particle binding to tissues (phototargeting).

Building biomedical materials using photochemical bond cleavage

Light can be used as an external trigger to precisely determine where and when a process is initiated as well as how much of the process is being consumed. Phototriggers are a type of photoresponsive functional group that undergo an irreversible photolysis reaction by selectively breaking a chemical bond, enabling three fundamental functions: the photoactivation of fluorescent and bioactive molecules; the photocleavable degradation of macromolecular materials; and the photorelease of drugs, active groups, or surface charges from carriers and interfaces. With the expanded applications of light-controlled technology, particularly in living systems, new challenges and improvements of phototriggers are required to fulfill the demands for better sensitivity, faster kinetics, and more-demanding biomedical applications. Here, improvements to several conventional phototriggers are highlighted, and their notable, representative biomedical applications and their challenges are discussed.

NIR-responsive polypeptide copolymer upconversion composite nanoparticles for triggered drug release and enhanced cytotoxicity

Near infrared light-responsive polypeptide copolymer upconversion composite nanoparticles exhibited controllable drug release and triggered cytotoxicity useful for on-demand drug delivery and cancer therapy.

Redox-responsive supramolecular amphiphiles constructed via host–guest interactions for photodynamic therapy

A supramolecular photosensitizer delivery system has been established through the self-assembly of supramolecular amphiphiles constructed by the host–guest interaction between poly(ethylene glycol)-β-cyclodextrin (PEG-β-CD) and adamantane-terminated porphyrin derivatives bearing a disulfide bond (TPPC6-SS-Ada).

15 years of ATTEMPTS: a macromolecular drug delivery system based on the CPP-mediated intracellular drug delivery and antibody targeting

Traditionally, any drug intended for combating the tumor would distribute profoundly to other organs and tissues as lack of targeting specificity, thus resulting in limited therapeutic effects toward the tumor but severe drug-induced toxic side effects. To prevail over this obstacle of drug-induced systemic toxicity, a novel approach termed "ATTEMPTS" (antibody targeted triggered electrically modified prodrug type strategy) was designed, which directly introduces both of the targeting and prodrug features onto the protein drugs. The ATTEMPTS system is composed of the antibody targeting component consisting of antibodies linked with heparin, and the cell penetrating peptide (CPP) modified drug component. The two components mentioned above self-assembled into a tight complex via the charge to charge interaction between the anionic heparin and cationic CPP. Once accumulated at the targeting site, the CPP modified drug is released from the blockage by a second triggering agent, while remaining inactive in the circulation during tumor targeting thus aborting its effect on normal tissues. We utilized the heparin-induced inhibition on the cell-penetrating activity of CPP to create the prodrug feature, and subsequently the protamine-induced reversal of heparin inhibition to resume cell transduction of the protein drug via the CPP function. Our approach is the first known system to overcome this selectivity issue, enabling CPP-mediated cellular drug delivery to be practically applicable clinically. In this review, we thoroughly discussed the historical and novel progress of the "ATTEMPTS" system.

Thermoresponsive nanodevices in biomedical applications

In the last couple of decades several drug carriers have been tailored on the nanometric scale by taking advantage of new stimuli responsive materials. Thermoresponsive polymers in particular have been extensively employed as stimuli-responsive building blocks that in combination with other environmental-responsive materials allowed the birth of smarter systems that can respond to more than one stimulus. Examples that highlight the different polymers for thermally triggered drug delivery will be described. A special emphasis will be given to the description of novel theranostic nanodevices that combine more than one responsive modality in order to create a local hyperthermia that leads to the polymer phase transition and triggered drug release, cell recognition, and/or appearance of an imaging signal.

Spontaneous organization of inorganic nanoparticles into nanovesicles triggered by UV light

A novel versatile light-triggered strategy is developed to organize inorganic nanoparticles (NPs) into nanovesicles with single or multiple layers in mixed solvents. This strategy constitutes a new assembly mechanism based on the photo-oxidation of thiol ligands. Compared with currently-used individual semiconductor NPs, the prepared CdSe QD vesicles exhibit an improved catalytic activity and unprecedented catalytic stability towards solar-driven hydrogen production. This light-triggered approach to functional nanoarchitectures would lead to new opportunities in various applications.

Multifunctional polymeric micelles for delivery of drugs and siRNA

Polymeric micelles, self-assembling nano-constructs of amphiphilic copolymers with a core-shell structure have been used as versatile carriers for delivery of drugs as well as nucleic acids. They have gained immense popularity owing to a host of favorable properties including their capacity to effectively solubilize a variety of poorly soluble pharmaceutical agents, biocompatibility, longevity, high stability in vitro and in vivo and the ability to accumulate in pathological areas with compromised vasculature. Moreover, additional functions can be imparted to these micelles by engineering their surface with various ligands and cell-penetrating moieties to allow for specific targeting and intracellular accumulation, respectively, to load them with contrast agents to confer imaging capabilities, and incorporating stimuli-sensitive groups that allow drug release in response to small changes in the environment. Recently, there has been an increasing trend toward designing polymeric micelles which integrate a number of the above functions into a single carrier to give rise to “smart,” multifunctional polymeric micelles. Such multifunctional micelles can be envisaged as key to improving the efficacy of current treatments which have seen a steady increase not only in hydrophobic small molecules, but also in biologics including therapeutic genes, antibodies and small interfering RNA (siRNA). The purpose of this review is to highlight recent advances in the development of multifunctional polymeric micelles specifically for delivery of drugs and siRNA. In spite of the tremendous potential of siRNA, its translation into clinics has been a significant challenge because of physiological barriers to its effective delivery and the lack of safe, effective and clinically suitable vehicles. To that end, we also discuss the potential and suitability of multifunctional polymeric micelles, including lipid-based micelles, as promising vehicles for both siRNA and drugs.

Theranostic vesicles based on bovine serum albumin and poly(ethylene glycol)-block-poly(L-lactic-co-glycolic acid) for magnetic resonance imaging and anticancer drug delivery

Presented in this article is the preparation of a new theranostic vesicle which exhibits excellent in vitro and in vivo T1 magnetic resonance (MR) imaging contrast effect and good anticancer drug delivery ability. The theranostic vesicle has been easily prepared based on an amphiphilic biocompatible and biodegradable dibock copolymer, poly(ethylene glycol)-block-poly(l-lactic-co-glycolic acid) (PEG-b-PLGA) and bovine serum albumin-gadolinium (BSA-Gd) complexes. Dynamic light scattering (DLS), transmission electron microscopy (TEM), UV-vis spectroscopy, and inductively coupled plasma atomic emission spectroscopy (ICP-AES) measurements confirmed the formation and physiological stability of BSA-Gd@PEG-b-PLGA vesicles. Furthermore, the in vitro and in vivo MR imaging experiments revealed their excellent T1-weighted MR imaging function. Red blood cell hemolysis and cytotoxicity experiments confirmed their good blood compatibility and low cytotoxicity. Doxorubicin (DOX) loading and release experiments indicated a more retarded release rate of DOX in those theranostic vesicles than sole PEG-b-PLGA nanoparticles without BSA. Overall, this new biocompatible and biodegradable vesicle shows promising potential in theranostic applications.

Polymeric nanoparticles for molecular imaging

Conventional imaging technologies (X-ray computed tomography, magnetic resonance, and optical) depend on contrast agents to visualize a target site or organ of interest. The imaging agents currently used in clinics for diagnosis suffer from disadvantages including poor target specificity and in vivo instability. Consequently, delivery of low concentrations of contrast agents to region of interest affects image quality. Therefore, it is important to selectively deliver high payload of contrast agent to obtain clinically useful images. Nanoparticles offer multifunctional capabilities to transport high concentrations of imaging probes selectively to diseased site inside the body. Polymeric nanoparticles, incorporated with contrast agents, have shown significant benefits in molecular imaging applications. These materials possess the ability to encapsulate different contrast agents within a single matrix enabling multimodal imaging possibilities. The materials can be surface conjugated to target-specific biomolecules for controlling the navigation under in vivo conditions. The versatility of this class of nanomaterials makes them an attractive platform for developing highly sensitive molecular imaging agents. The research community's progress in the area of synthesis of polymeric nanomaterials and their in vivo imaging applications has been noteworthy, but it is still in the pioneer stage of development. The challenges ahead should focus on the design and fabrication of these materials including burst release of contrasts agents, solubility, and stability issues of polymeric nanomaterials.