Synthetic Analogues of the Active Sites of Iron−Sulfur Proteins

NRVS of FeS cluster proteins & models - A bestiary of nifty normal modes

Iron‑sulfur clusters are the primordial prosthetic groups for living systems, and they have even been proposed as partly responsible for the origin of life. They play a role in essential biological processes such as electron transfer, enzyme catalysis, DNA replication and repair, small molecule sensing, iron homeostasis, apoptosis, and human health and disease. They have frequently been studied by resonance Raman, electron paramagnetic resonance, and Mössbauer spectroscopies. Over the past two decades, we have used a synchrotron method called Nuclear Resonance Vibrational Spectroscopy (NRVS) to examine the vibrational dynamics of a wide variety of FeS clusters in model systems and native proteins, ranging in complexity from single Fe sites in small rubredoxins to the [7Fe-9S-C-Mo-R-homocitrate] cluster in nitrogenases.

Heavier Chalcogenate-Bridged Manganese Carbonyl Complexes: Synthesis, Reactivity, and Electrochemical Investigation

The chemistry and electrochemical properties of heavier chalcogen-supported (Se or Te) dimanganese complexes have been described. The photolytic reaction of [Mn2(CO)10] with NaER [E = S, R = Ph; E = Se, R = Ph; E = Te, R = Ph; E = Se, R = ─C6H4-p-NMe2], followed by [(n-Bu)4NI] led to the formation of [(n-Bu)4N]+[(CO)3Mn(μ-ER)3Mn (CO)3]¯ [E = S, R = Ph (1); E = Se, R = Ph (2); E = Te, R = Ph (3); E = Se, R = ─C6H4-p-NMe2 (4)] complexes. Complexes 1 and 2 were employed for electrocatalytic hydrogen evolution in the presence of HBF4. The reported complexes were found to be catalytically inefficient. Complexes 1-4 showed quasi-reversible oxidation peaks, and the reaction of 2 and 3 with dry oxygen resulted in the formation of dichalcogenides. This illustrates, in particular, how these complexes' oxygen tolerance differs owing to the chalcogen identity. The reaction of these trichalcogenate-bridged dimanganese complexes 2 and 4 with HBF4, resulted in the formation of cubane-type structure [(CO)3Mn(μ-SeR)]4 [E = Se, R = Ph (VII); E = Se, R = ─C6H4-p-NMe2 (5)]. The photolytic reaction of [Mn2(CO)10] with NaER [E = Se, R = ─C6H4-p-NMe2], followed by (Cp*CoCl)2 resulted in the formation of a heterobimetallic triselenolate-bridged complex (6). These complexes were characterized by employing different multinuclear NMR, IR spectroscopies, single-crystal X-ray diffraction analyses, and mass spectrometry.

Prebiotic synthesis of the major classes of iron-sulfur clusters

Conditions that led to the synthesis of iron-sulfur clusters coordinated to tripeptides with a single thiolate ligand were investigated by UV-vis, NMR, EPR, and Mössbauer spectroscopies and by electrochemistry. Increasing concentrations of hydrosulfide correlated with the formation of higher nuclearity iron-sulfur clusters from mononuclear to [2Fe-2S] to [4Fe-4S] and finally to a putative, nitrogenase-like [6Fe-9S] complex. Increased nuclearity was also associated with decreased dynamics and increased stability. The synthesis of higher nuclearity iron-sulfur clusters is compatible with shallow, alkaline bodies of water on the surface of the early Earth, although other niche environments are possible. Because of the plasticity of such complexes, the type of iron-sulfur cluster formed on the prebiotic Earth would have been greatly influenced by the chemical environment and the thiolate containing scaffold. The discovery that all the major classes of iron-sulfur clusters easily form under prebiotically reasonable conditions broadens the chemistry accessible to protometabolic systems.

Pulling back the mitochondria's iron curtain

Mitochondrial functionality and cellular iron homeostasis are closely intertwined. Mitochondria are biosynthetic hubs for essential iron cofactors such as iron-sulfur (Fe-S) clusters and heme. These cofactors, in turn, enable key mitochondrial pathways, such as energy and metabolite production. Mishandling of mitochondrial iron is associated with a spectrum of human pathologies ranging from rare genetic disorders to common conditions. Here, we review mitochondrial iron utilization and its intersection with disease.

[2Fe-2S] model compounds

This feature article reviews the synthesis, structural comparison, and physical properties of [2Fe-2S] model compounds, which serve as vital tools for understanding the structure and function of Fe-S clusters in biological systems. We explore various synthetic methods for constructing [2Fe-2S] cores, offering insights into their biomimetic relevance. A comprehensive analysis and comparison of Mössbauer spectroscopy data between model compounds and natural protein systems are provided, highlighting the structural and electronic parallels. Additionally, we discuss the redox potentials of synthetic [2Fe-2S] compounds, their deviation from biological systems, and potential strategies to align them with natural counterparts. The review concludes with a discussion of future research directions, particularly the development of models capable of mimicking biological processes such as catalysis and electron transfer reactions. This article serves as a valuable resource for researchers in inorganic chemistry, bioinorganic chemistry, biochemistry, and related fields, offering both fundamental insights and potential applications of [2Fe-2S] clusters.

Water Encapsulated [(Fe4Se4)Se4]6- Clusters in [Na6(H2O)18][Fe4Se8]

[Na6(H2O)18][Fe4Se8] was synthesized using hydrothermal methods and characterized by single-crystal X-ray diffraction, 57Fe Mössbauer spectroscopy, magnetization, and muon spin resonance (μSR) measurements. The cubic crystal structure (space group I23, a = 11.785 Å, Z = 2) contains heterocubane-type [ F e 4 S e 4 ] 2 + clusters with Td symmetry. Four additional selenium atoms complete the tetrahedral coordination around the iron atoms, forming [ ( F e 4 S e 4 ) S e 4 ] 6 - units. Notably, the selenide ligands do not interact with the sodium cations, as the Fe4Se86- cluster in [Na6(H2O)18][Fe4Se8] is exclusively surrounded by water molecules via weak Se···H-O hydrogen bonds. This is particularly remarkable given that [Fe4Q4] clusters are typically unstable in water. Quantum chemical calculations (DFT) confirm the crystal structure and improve the positions of the hydrogen atoms. 57Fe Mössbauer spectroscopy reveals that the spin ordering of the mixed-valence [Fe42.5+Se4]2+ cluster core mirrors the antiparallel spin arrangement found in analogous iron-sulfur clusters, such as [ F e 4 S 4 ] 2 + , in protein-bound systems. An increase of the quadrupole splitting at low temperatures indicates changes of the orbital occupations. μSR Experiments show a reduction of the spin fluctuation frequency until the system becomes static at low temperatures, but no evidence of a S = 0 state above 2 K.

Activation of Strong π-Acids at [Fe4S4]+ Clusters Enabled by a Noncanonical Electronic Structure

Although Fe-S clusters are privileged metallocofactors for the reduction of N2, CO, and other π-acidic substrates, their constituent metal ions─high-spin Fe2+ and Fe3+─are typically not amenable to binding and activating strong π-acids. Here, we demonstrate that [Fe4S4]+ clusters can overcome this limitation by adopting a noncanonical electronic structure. Specifically, we report the synthesis and characterization of a series of 3:1 site-differentiated [Fe4S4]+ clusters in which the unique Fe site is bound by one of 10 electronically variable arylisocyanide ligands. Rather than being continuously tuned as a function of the arylisocyanides' electronic properties (e.g., as quantified by linear free energy relationships), the structures of the clusters are divided into two groups: (i) those with moderately π-acidic isocyanides, which adopt a "typical" structure characterized by standard bond metrics and geometric distortions from tetrahedral symmetry, and (ii) those with more strongly π-acidic isocyanides, which adopt a "contracted" structure with an unusually symmetric geometry and a compressed cluster core. Computational studies revealed that although the "typical" structure has a canonical electronic structure, the "contracted" structure has a noncanonical arrangement of spin density, with a full complement of π-backbonding electrons and more substantial Fe-Fe delocalization. These features of the "contracted" structure enable substantial C≡N bond weakening of the strongest π-acceptors in the series. More generally, the experimental characterization of the "contracted" electronic isomer suggests that other noncanonical electronic structures of Fe-S clusters remain to be discovered.

Importance of Electron Correlation on the Geometry and Electronic Structure of [2Fe-2S] Systems: A Benchmark Study of the [Fe2S2(SCH3)4]2-,3-,4-, [Fe2S2(SCys)4]2-, [Fe2S2(S-p-tol)4]2-, and [Fe2S2(S-o-xyl)4]2- Complexes

Iron-sulfur clusters are crucial for biological electron transport and catalysis. Obtaining accurate geometries, energetics, manifolds of their excited electronic states, and reduction energies is important to understand their role in these processes. Using a [2Fe-2S] model complex with FeII and FeIII oxidation states, which leads to different charges, i.e., [Fe2S2(SMe)4]2-,3-,4-, we benchmarked a variety of computational methodologies ranging from density functional theory (DFT) to post-Hartree-Fock methods, including complete active space self-consistent field (CASSCF), multireference configuration interaction, the second-order N-electron valence state perturbation theory (NEVPT2), and the linearized integrand approximation of adiabatic connection (AC0) approaches. Additionally, we studied three experimentally well-characterized complexes, [Fe2S2(SCys)4]2-, [Fe2S2(S-o-tol)4]2-, and [Fe2S2(S-o-xyl)4]2-, via DFT methods. We conclude that the dynamic electron correlation is important for accurately predicting the geometry of these complexes. Broken symmetry (BS) DFT correctly predicts experimental geometries of low-spin multiplicity, while CASSCF does not. However, BS-DFT significantly overestimates the difference between the low- and high-spin electronic states for a given oxidation state. At the same time, CASSCF underestimates it but provides relative energies closer to the reference NEVPT2 results. Finally, AC0 provides energetics of NEVPT2 quality with the additional advantage of being able to use large CASSCF sizes. NEVPT2 gives the best estimates of the FeIII/FeIII → FeII/FeIII (4.27 eV) and FeII/FIII → FeII/FII (7.72 eV) reduction energies. The results provide insight into the electronic structure of these complexes and assist in the understanding of their physical properties.

Insight into the photodynamic mechanism and protein binding of a nitrosyl iron-sulfur [Fe2S2(NO)4]2- cluster

Iron-sulfur cluster conversion and nitrosyl modification are involved in regulating their functions and play critical roles in signaling for biological systems. Hereby, the photo-induced dynamic process of (Me4N)2[Fe2S2(NO)4] was monitored using time-resolved electron paramagnetic resonance (EPR) spectra, MS spectra and cellular imaging methods. Photo-irradiation and the solvent affect the reaction rates and products. Spectroscopic and kinetic studies have shown that the process involves at least three intermediates: spin-trapped NO free radical species with a gav at 2.040, and two other iron nitrosyl species, dinitrosyl iron units (DNICs) and mononitrosyl iron units (MNICs) with gav values at 2.031 and 2.024, respectively. Moreover, the [Fe2S2(NO)4]2- cluster could bind with ferritin and decompose gradually, and a binding state of dinitrosyl iron coordinated with Cys102 of the recombinant human heavy chain ferritin (rHuHF) was finally formed. This study provides insight into the photodynamic mechanism of nitrosyl iron - sulfur clusters to improve the understanding of physiological activity.

Inserting Three-Coordinate Nickel into [4Fe-4S] Clusters

Metalloenzymes can efficiently achieve the multielectron interconversion of carbon dioxide and carbon monoxide under mild conditions. Anaerobic carbon monoxide dehydrogenase (CODH) performs these reactions at the C cluster, a unique nickel-iron-sulfide cluster that features an apparent three-coordinate nickel site. How nature assembles the [NiFe3S4]-Feu cluster is not well understood. We use synthetic clusters to demonstrate that electron transfer can drive insertion of a Ni0 precursor into an [Fe4S4]3+ cluster to assemble higher nuclearity nickel-iron-sulfide clusters with the same complement of metal ions as the C cluster. Initial electron transfer results in a [1Ni-4Fe-4S] cluster in which a Ni1+ ion sits outside of the cluster. Modifying the Ni0 precursor results in the insertion of two nickel atoms into the cluster, concomitant with ejection of an iron to yield an unprecedented [2Ni-3Fe-4S] cluster possessing four three-coordinate metal sites. Both clusters are characterized using magnetometry, electron paramagnetic resonance (EPR), Mössbauer, and X-ray absorption spectroscopy and supported by DFT computations that are consistent with both clusters having nickel in the +1 oxidation state. These results demonstrate that Ni1+ is a viable oxidation state within iron-sulfur clusters and that redox-driven transformations can give rise to higher nuclearity clusters of relevance to the CODH C cluster.

Ferredoxins: Functions, Evolution, Potential Applications, and Challenges of Subtype Classification

Ferredoxins are proteins found in all biological kingdoms and are involved in essential biological processes including photosynthesis, lipid metabolism, and biogeochemical cycles. Ferredoxins are classified into different groups based on the iron-sulfur (Fe-S) clusters that they contain. A new subtype classification and nomenclature system, based on the spacing between amino acids in the Fe-S binding motif, has been proposed in order to better understand ferredoxins' biological diversity and evolutionary linkage across different organisms. This new classification system has revealed an unparalleled diversity between ferredoxins and has helped identify evolutionarily linked ferredoxins between species. The current review provides the latest insights into ferredoxin functions and evolution, and the new subtype classification, outlining their potential biotechnological applications and the future challenges in streamlining the process.

Ferredoxin: A novel antimicrobial peptide derived from the black scraper (Thamnaconus modestus)

Ferredoxin (FDX) is a highly conserved iron-sulfur protein that participates in redox reactions and plays an important role as an electron transport protein in biological processes. However, its function in marine fish remains unclear. We identified two ferrodoxin proteins, FDX1 and FDX2, from black scraper (Thamnaconus modestus) to confirm their genetic structures and expression profiles and to investigate their antimicrobial activity properties by fabricating them with antimicrobial peptides based on sequences. The two TmFDXs mRNAs were most abundant in peripheral blood leukocytes of healthy T. modestus. After artificial infection with Vibrio anguillarum, a major pathogen of T. modestus, TmFDX1 mRNA was significantly upregulated in the gills, heart, intestines, kidneys, liver, and spleen, but was consistently downregulated in the brain. The expression levels of TmFDX2 mRNA were significantly upregulated in the heart, intestines, kidneys, liver, and spleen; however, no significant changes in expression were observed in the brain or gills. Based on the 2Fe-2S ferredoxin-type iron-sulfur-binding domain sequence, two peptides (pFDX1 and pFDX2) were synthesized. The bactericidal effect, biofilm formation inhibition, and gDNA-binding activity of these peptides were investigated. These findings highlight the potential as a natural peptide candidate for TmFDXs.

Cooperative Sulfur Transformations at a Dinickel Site: A Metal Bridging Sulfur Radical and Its H-Atom Abstraction Thermochemistry

Starting from the dinickel(II) dihydride complex [ML(Ni-H)2] (1M), where L3- is a bis(tridentate) pyrazolate-bridged bis(β-diketiminato) ligand and M+ is Na+ or K+, a series of complexes [KLNi2(S2)] (2K), [MLNi2S] (3M), [LNi2(SMe)] (4), and [LNi2(SH)] (5) has been prepared. The μ-sulfido complexes 3M can be reversibly oxidized at E1/2 = -1.17 V (in THF; vs Fc+/Fc) to give [LNi2(S•)] (6) featuring a bridging S-radical. 6 has been comprehensively characterized, including by X-ray diffraction, SQUID magnetometry, EPR and XAS/XES spectroscopies, and DFT calculations. The pKa of the μ-hydrosulfido complex 5 in THF is 30.8 ± 0.4, which defines a S-H bond dissociation free energy (BDFE) of 75.1 ± 1.0 kcal mol-1. 6 reacts with H atom donors such as TEMPO-H and xanthene to give 5, while 5 reacts with 2,4,6-tri(tert-butyl)phenoxy radical in a reverse H atom transfer to generate 6. These findings provide the first full characterization of a genuine M-(μ-S•-)-M complex and provide insights into its proton-coupled electron transfer (PCET) reactivity, which is of interest in view of the prominence of M-(μ-SH/μ-S)-M units in biological systems and heterogeneous catalysis.

Generation of Thiosulfate, Selenite, Dithiosulfite, Perthionitrite, Nitric Oxide, and Reactive Chalcogen Species by Binuclear Zinc(II)-Chalcogenolato/-Polychalcogenido Complexes

A comparative bioinspired reactivity study of new binuclear Zn(II) complexes featuring coordinated thiolate, selenolate, trisulfide and diselenide in relation with (i) the generation of reactive sulfur/selenium species (RSS/RSeS), (ii) the oxygen dependent oxidation and disproportionation of polysulfide (Sn2-) to produce sulfite (SO32-), thiosulfate (S2O32-) and sulfide (S2-) by sulfur oxygenase reductase (SOR), and (iii) the reaction of Sn2- with nitrite (NO2-) to generate thionitrite (SNO-), perthionitrite (SSNO-) and nitric oxide (NO), is presented. The binuclear Zn(II)-thiolate/selenolate complexes could react with elemental sulfur to generate RSS/RSeS while similar reactions involving elemental selenium could not generate RSeS. The dizinc(II)-S3 and the dizinc(II)-Se2 complexes could react with dioxygen (O2) to generate binuclear Zn(II) complexes featuring coordinated thiosulfate (S2O32-) and selenite (SeO32-), respectively. Finally, unlike the nonreactive nature of the dizinc(II)-Se2 complex toward NO2-, reaction of the dizinc(II)-S3 complex with NO2- produced a new binuclear Zn(II) complex featuring a coordinated dithiosulfite (S3O2-) along with the formation of perthionitrite (SSNO-), of which the latter subsequently produced nitric oxide (NO) and S42-. The present work, thus, demonstrates the comparative reactivity of a series of binuclear Zn(II)-chalcogenolato/-polychalcogenido complexes for the generation of S2O32-, SeO32-, S3O2-, SSNO-, NO and RSS/RSeS.

Opportunities for Insight into the Mechanism of Efficient CO2/CO Interconversion at a Nickel-Iron Cluster in CO Dehydrogenase

The reduction of CO2 with low overpotential and high selectivity is a crucial challenge in catalysis. Fortunately, natural systems have evolved enzymes that achieve this catalytic reaction very efficiently at a complex nickel-iron-sulfur cluster within carbon monoxide dehydrogenase (CODH). Extensive biochemical, crystallographic, and spectroscopic work has been done to understand the structures and mechanism involved in the catalytic cycle, which are summarized here from the perspective of mechanistic organometallic chemistry. We highlight the ambiguities in the data and suggest experiments that could lead to clearer understanding of the mechanism and structures of intermediates at the active-site cluster. These include parallel crystallography and spectroscopy, as well as the preparation of synthetic analogues that help to interpret structural and spectroscopic signatures.

Nonheme binuclear transition metal complexes with hydrosulfide and polychalcogenides

The intriguing chemistry of chalcogen (S, Se)-containing ligands and their capability to bridge multiple metal centres have resulted in a plethora of reports on transition metal complexes featuring hydrosulfide (HS-) and polychalcogenides (En2-, E = S, Se). While a large number of such molecules are strictly organometallic complexes, examples of non-organometallic complexes featuring HS- and En2- with N-/O-donor ligands are relatively rare. The general synthetic procedure for the transition metal-hydrosulfido complexes involves the reaction of the corresponding metal salts with HS-/H2S and this is prone to generate sulfido bridged oligomers in the absence of sterically demanding ligands. On the other hand, the synthetic methods for the preparation of transition metal-polychalcogenido complexes include the reaction of the corresponding metal salts with En2- or the two electron oxidation of low-valent metals with elemental chalcogen, often at an elevated temperature and/or for a long time. Recently, we have developed new synthetic methods for the preparation of two new classes of binuclear transition metal complexes featuring either HS-, or Sn2- and Sen2- ligands. The new method for the synthesis of transition metal-hydrosulfido complexes involved transition metal-mediated hydrolysis of thiolates at room temperature (RT), while the method for the synthesis of transition metal-polychalcogenido complexes involved redox reaction of coordinated thiolates and exogenous elemental chalcogens at RT. An overview of the synthetic aspects, structural properties and intriguing reactivity of these two new classes of transition metal complexes is presented.

Catalytic, Spectroscopic, and Theoretical Studies of Fe4S4-Based Coordination Polymers as Heterogenous Coupled Proton-Electron Transfer Mediators for Electrocatalysis

Iron-sulfur clusters play essential roles in biological systems, and thus synthetic [Fe4S4] clusters have been an area of active research. Recent studies have demonstrated that soluble [Fe4S4] clusters can serve as net H atom transfer mediators, improving the activity and selectivity of a homogeneous Mn CO2 reduction catalyst. Here, we demonstrate that incorporating these [Fe4S4] clusters into a coordination polymer enables heterogeneous H atom transfer from an electrode surface to a Mn complex dissolved in solution. A previously reported solution-processable Fe4S4-based coordination polymer was successfully deposited on the surfaces of different electrodes. The coated electrodes serve as H atom transfer mediators to a soluble Mn CO2 reduction catalyst displaying good product selectivity for formic acid. Furthermore, these electrodes are recyclable with a minimal decrease in activity after multiple catalytic cycles. The heterogenization of the mediator also enables the characterization of solution-phase and electrode surface species separately. Surface enhanced infrared absorption spectroscopy (SEIRAS) reveals spectroscopic signatures for an in situ generated active Mn-H species, providing a more complete mechanistic picture for this system. The active species, reaction mechanism, and the protonation sites on the [Fe4S4] clusters were further confirmed by density functional theory calculations. The observed H atom transfer reactivity of these coordination polymer-coated electrodes motivates additional applications of this composite material in reductive H atom transfer electrocatalysis.

Chemistry of Polythiols and Their Industrial Applications

Thiols can react with readily available organic substrates under benign conditions, making them suitable for use in chemical, biological, physical, and materials and engineering research areas. In particular, the highly efficient thiol-based click reaction includes the reaction of radicals with electron-rich enes, Michael addition with electron-poor enes, carbonyl addition with isocyanate SN2 ring opening with epoxies, and SN2 nucleophilic substitution with halogens. This mini review provides insights into emerging venues for their industrial applications, especially for the applications of thiol-ene, thiol-isocyanate, and thiol-epoxy reactions, highlighting a brief chemistry of thiols as well as various approaches to polythiol synthesis.

Generation and Reactivity of Polychalcogenide Chains in Binuclear Cobalt(II) Complexes

A series of six binuclear Co(II)-thiolate complexes, [Co2(BPMP)(S-C6H4-o-X)2]1+ (X = OMe, 2; NH2, 3), [Co2(BPMP)(μ-S-C6H4-o-O)]1+ (4), and [Co2(BPMP)(μ-Y)]1+ (Y = bdt, 5; tdt, 6; mnt, 7), has been synthesized from [Co2(BPMP)(MeOH)2(Cl)2]1+ (1a) and [Co2(BPMP)(Cl)2]1+ (1b), where BPMP1- is the anion of 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol. While 2 and 3 could allow the two-electron redox reaction of the two coordinated thiolates with elemental sulfur (S8) to generate [Co2(BPMP)(μ-S5)]1+ (8), the complexes, 4-7, could not undergo a similar reaction. An analogous redox reaction of 2 with elemental selenium ([Se]) produced [{Co2(BPMP)(μ-Se4)}{Co2(BPMP)(μ-Se3)}]2+ (9a) and [Co2(BPMP)(μ-Se4)]1+ (9b). Further reaction of these polychalcogenido complexes, 8 and 9a/9b, with PPh3 allowed the isolation of [Co2(BPMP)(μ-S)]1+ (10) and [Co2(BPMP)(μ-Se2)]1+ (11), which, in turn, could be converted back to 8 and 9a upon treatment with S8 and [Se], respectively. Interestingly, while the redox reaction of the polyselenide chains in 9a and 11 with S8 produced 8 and [Se], the treatment of 8 with [Se] gave back only the starting material (8), thus demonstrating the different redox behavior of sulfur and selenium. Furthermore, the reaction of 8 and 9a/9b with activated alkynes and cyanide (CN-) allowed the isolation of the complexes, [Co2(BPMP)(μ-E2C2(CO2R)2)]1+ (E = S: 12a, R = Me; 12b, R = Et; E = Se: 13a, R = Me; 13b, R = Et) and [Co2(BPMP)(μ-SH)(NCS)2] (14), respectively. The present work, thus, provides an interesting synthetic strategy, interconversions, and detailed comparative reactivity of binuclear Co(II)-polychalcogenido complexes.

Three-Coordinate Nickel and Metal-Metal Interactions in a Heterometallic Iron-Sulfur Cluster

Biological multielectron reactions often are performed by metalloenzymes with heterometallic sites, such as anaerobic carbon monoxide dehydrogenase (CODH), which has a nickel-iron-sulfide cubane with a possible three-coordinate nickel site. Here, we isolate the first synthetic iron-sulfur clusters having a nickel atom with only three donors, showing that this structural feature is feasible. These have a core with two tetrahedral irons, one octahedral tungsten, and a three-coordinate nickel connected by sulfide and thiolate bridges. Electron paramagnetic resonance (EPR), Mössbauer, and superconducting quantum interference device (SQUID) data are combined with density functional theory (DFT) computations to show how the electronic structure of the cluster arises from strong magnetic coupling between the Ni, Fe, and W sites. X-ray absorption spectroscopy, together with spectroscopically validated DFT analysis, suggests that the electronic structure can be described with a formal Ni1+ atom participating in a nonpolar Ni-W σ-bond. This metal-metal bond, which minimizes spin density at Ni1+, is conserved in two cluster oxidation states. Fe-W bonding is found in all clusters, in one case stabilizing a local non-Hund state at tungsten. Based on these results, we compare different M-M interactions and speculate that other heterometallic clusters, including metalloenzyme active sites, could likewise store redox equivalents and stabilize low-valent metal centers through metal-metal bonding.

Thiol and thioether-based metal-organic frameworks: synthesis, structure, and multifaceted applications

Metal-organic frameworks (MOFs) are unique hybrid porous materials formed by combining metal ions or clusters with organic ligands. Thiol and thioether-based MOFs belong to a specific category of MOFs where one or many thiols or thioether groups are present in organic linkers. Depending on the linkers, thiol-thioether MOFs can be divided into three categories: (i) MOFs where both thiol or thioether groups are part of the carboxylic acid ligands, (ii) MOFs where only thiol or thioether groups are present in the organic linker, and (iii) MOFs where both thiol or thioether groups are part of azolate-containing linkers. MOFs containing thiol-thioether-based acid ligands are synthesized through two primary approaches; one is by utilizing thiol and thioether-based carboxylic acid ligands where the bonding pattern of ligands with metal ions plays a vital role in MOF formation (HSAB principle). MOFs synthesized by this approach can be structurally differentiated into two categories: structures without common structural motifs and structures with common structural motifs (related to UiO-66, UiO-67, UiO-68, MIL-53, NU-1100, etc.). The second approach to synthesize thiol and thioether-based MOFs is indirect methods, where thiol or thioether functionality is introduced in MOFs by techniques like post-synthetic modifications (PSM), post-synthetic exchange (PSE) and by forming composite materials. Generally, MOFs containing only thiol-thioether-based ligands are synthesized by interfacial assisted synthesis, forming two-dimensional sheet frameworks, and show significantly high conductivity. A limited study has been done on MOFs containing thiol-thioether-based azolate ligands where both nitrogen- and sulfur-containing functionality are present in the MOF frameworks. These materials exhibit intriguing properties stemming from the interplay between metal centres, organic ligands, and sulfur functionality. As a result, they offer great potential for multifaceted applications, ranging from catalysis, sensing, and conductivity, to adsorption. This perspective is organised through an introduction, schematic representations, and tabular data of the reported thiol and thioether MOFs and concluded with future directions.

Hydrogen atom abstraction by a high spin [FeIII=S] complex

Iron sulfur clusters are critical to a plethora of biological processes; however, little is known about the elementary unit of these clusters, namely the [Fe=S]n+ fragment. Here, we report the synthesis and characterization of a terminal iron sulfido complex. Despite its high spin (S = 5/2) ground state, structural, spectroscopic, and computational characterization provide evidence for iron sulfur multiple bond character. Intriguingly, the complex reacts with additional sulfur to afford an S = 3/2 iron(III) disulfido (S2 2-) complex. Preliminary studies reveal that the sulfido complex reacts with dihydroanthracene to afford an iron(II) hydrosulfido complex, akin to the reactivity of iron oxo complexes. By contrast, there is no reaction with the disulfido complex. These results provide important insight into the nature of the iron sulfide unit.

An Iron-Sulfur Cluster with a Highly Pyramidalized Three-Coordinate Iron Center and a Negligible Affinity for Dinitrogen

Attempts to generate open coordination sites for N2 binding at synthetic Fe-S clusters often instead result in cluster oligomerization. Recently, it was shown for Mo-Fe-S clusters that such oligomerization reactions can be prevented through the use of sterically protective supporting ligands, thereby enabling N2 complex formation. Here, this strategy is extended to Fe-only Fe-S clusters. One-electron reduction of (IMes)3Fe4S4Cl (IMes = 1,3-dimesitylimidazol-2-ylidene) forms the transiently stable edge-bridged double cubane (IMes)6Fe8S8, which loses two IMes ligands to form the face-bridged double-cubane, (IMes)4Fe8S8. The finding that the three supporting IMes ligands do not confer sufficient protection to curtail cluster oligomerization prompted the design of a new N-heterocyclic carbene, SIArMe,iPr (1,3-bis(3,5-diisopropyl-2,6-dimethylphenyl)-2-imidazolidinylidene; abbreviated as SIAr), that features bulky groups strategically placed in remote positions. When the reduction of (SIAr)3Fe4S4Cl or [(SIAr)3Fe4S4(THF)]+ is conducted in the presence of SIAr, the formation of (SIAr)4Fe8S8 is indeed suppressed, permitting characterization of the reduced [Fe4S4]0 product. Surprisingly, rather than being an N2 complex, the product is simply (SIAr)3Fe4S4: a cluster with a three-coordinate Fe site that adopts an unusually pyramidalized geometry. Although (SIAr)3Fe4S4 does not coordinate N2 to any appreciable extent under the surveyed conditions, it does bind CO to form (SIAr)3Fe4S4(CO). This finding demonstates that the binding pocket at the unique Fe is not too small for N2; instead, the exceptionally weak affinity for N2 can be attributed to weak Fe-N2 bonding. The differences in the N2 coordination chemistry between sterically protected Mo-Fe-S clusters and Fe-only Fe-S clusters are discussed.

A general method for metallocluster site-differentiation

The deployment of metalloclusters in applications such as catalysis and materials synthesis requires robust methods for site-differentiation: the conversion of clusters with symmetric ligand spheres to those with unsymmetrical ligand spheres. However, imparting precise patterns of site-differentiation is challenging because, compared with mononuclear complexes, the ligands bound to clusters exert limited spatial and electronic influence on one another. Here, we report a method that employs sterically encumbering ligands to bind to only a subset of a cluster's coordination sites. Specifically, we show that homoleptic, phosphine-ligated Fe-S clusters undergo ligand substitution with N-heterocyclic carbenes (NHCs) to give heteroleptic clusters in which the resultant clusters' site-differentiation patterns are encoded by the steric profile of the incoming NHC. This method affords access to every site-differentiation pattern for cuboidal [Fe4S4] clusters and can be extended to other cluster types, particularly in the stereoselective synthesis of site-differentiated Chevrel-type [Fe6S8] clusters.

Isostructural bridging diferrous chalcogenide cores [FeII(μ-E)FeII] (E = O, S, Se, Te) with decreasing antiferromagnetic coupling down the chalcogenide series

Iron compounds containing a bridging oxo or sulfido moiety are ubiquitous in biological systems, but substitution with the heavier chalcogenides selenium and tellurium, however, is much rarer, with only a few examples reported to date. Here we show that treatment of the ferrous starting material [(^tBupyrpyrr₂)Fe(OEt₂)] (1-OEt₂) (^tBupyrpyrr₂ = 3,5-^tBu₂-bis(pyrrolyl)pyridine) with phosphine chalcogenide reagents E = PR₃ results in the neutral phosphine chalcogenide adduct series [(^tBupyrpyrr₂)Fe(EPR₃)] (E = O, S, Se; R = Ph; E = Te; R = ^tBu) (1-E) without any electron transfer, whereas treatment of the anionic starting material [K]₂[(^tBupyrpyrr₂)Fe₂(μ-N₂)] (2-N₂) with the appropriate chalcogenide transfer source yields cleanly the isostructural ferrous bridging mono-chalcogenide ate complexes [K]₂[(^tBupyrpyrr₂)Fe₂(μ-E)] (2-E) (E = O, S, Se, and Te) having significant deviation in the Fe-E-Fe bridge from linear in the case of E = O to more acute for the heaviest chalcogenide. All bridging chalcogenide complexes were analyzed using a variety of spectroscopic techniques, including ¹H NMR, UV-Vis electronic absorbtion, and ⁵⁷Fe Mössbauer. The spin-state and degree of communication between the two ferrous ions were probed via SQUID magnetometry, where it was found that all iron centers were high-spin (S = 2) Fe^II, with magnetic exchange coupling between the Fe^II ions. Magnetic studies established that antiferromagnetic coupling between the ferrous ions decreases as the identity of the chalcogen is tuned from O to the heaviest congener Te.

Cubane-type tungsten-iron-sulfur clusters with a nitrogen atom in the core: terminal ligand substitutions and redox behaviors

The lack of M-Fe-S (M = Mo or W) clusters incorporating a second period (2p) atom in the core has resulted in limited investigations and poor understanding of the physical and chemical properties of the M-Fe-S clusters closely related to the FeMo cofactor. In this work, systematic studies have been carried out to explore the chemical reactivities at the terminal ligand sites and the redox properties of a series of clusters comprising a [WFe₃S₃N] cubane core, based on the previously developed cluster [(Tp*)WFe₃S₃(μ₃-NSiMe₃)Cl₃]^1-. Substitutions of the terminal chlorides with ethanethiolate, methanethiolate, thiophenolate, p-thiocresolate and azide occurred smoothly, while the replacement of the chlorides with carbene ligands required the reduction of the precursor into [(Tp*)WFe₃S₃(μ₃-NSiMe₃)Cl₃]^2- first. The reduced cluster core could also be supported by thiophenolates as terminal ligands, but not thiolates or azides. It is remarkable that the thiophenolate ligated reduced cluster can be synthesized from the precursor [(Tp*)WFe₃S₃(μ₃-NSiMe₃)Cl₃]^1-via different synthetic routes, either reduction followed by substitution or substitution followed by reduction, either in situ or stepwise. This work indicates that terminal ligands contribute significantly to determine the chemical and physical properties of the clusters, even though they might affect the cluster core to a limited extent from a structural point of view, which raises the possibility of delicate control in regulating the physical/chemical properties of M-Fe-S clusters with a heteroleptic core incorporating 2p atom(s).

Connecting the geometric and electronic structures of the nitrogenase iron-molybdenum cofactor through site-selective 57Fe labelling

Understanding the chemical bonding in the catalytic cofactor of the Mo nitrogenase (FeMo-co) is foundational for building a mechanistic picture of biological nitrogen fixation. A persistent obstacle towards this goal has been that the 57Fe-based spectroscopic data-although rich with information-combines responses from all seven Fe sites, and it has therefore not been possible to map individual spectroscopic responses to specific sites in the three-dimensional structure. Here we have addressed this challenge by incorporating 57Fe into a single site of FeMo-co. Spectroscopic analysis of the resting state informed on the local electronic structure of the terminal Fe1 site, including its oxidation state and spin orientation, and, in turn, on the spin-coupling scheme for the entire cluster. The oxidized resting state and the first intermediate in nitrogen fixation were also characterized, and comparisons with the resting state provided molecular-level insights into the redox chemistry of FeMo-co.

Predicting Kinetics and Dynamics of Spin-Dependent Processes

ConspectusPredicting mechanisms and rates of nonadiabatic spin-dependent processes including photoinduced intersystem crossings, thermally activated spin-forbidden reactions, and spin crossovers in metal centers is a very active field of research. These processes play critical roles in transition-metal-based and metalloenzymatic catalysis, molecular magnets, light-harvesting materials, organic light-emitting diodes, photosensitizers for photodynamic therapy, and many other applications. Therefore, accurate modeling of spin-dependent processes in complex systems and on different time scales is important for many problems in chemistry, biochemistry, and materials sciences.Nonadiabatic statistical theory (NAST) and nonadiabatic molecular dynamics (NAMD) are two complementary approaches to modeling the kinetics and dynamics of spin-dependent processes. NAST predicts the probabilities and rate constants of nonradiative transitions between electronic states with different spin multiplicities using molecular properties at only few critical points on the potential energy surfaces (PESs), including the reactant minimum and the minimum energy crossing point (MECP) between two spin states. This makes it possible to obtain molecular properties for NAST calculations using accurate but often computationally expensive electronic structure methods, which is critical for predicting the rate constants of spin-dependent processes. Alternatively, NAST can be used to study spin-dependent processes in very large complex molecular systems using less computationally expensive electronic structure methods. The nuclear quantum effects, such as zero-point vibrational energy, tunneling, and interference between reaction paths can be easily incorporated. However, the statistical and local nature of NAST makes it more suitable for large systems and slow kinetics. In contrast, NAMD explores entire PESs of interacting electronic states, making it ideal for modeling fast barrierless spin-dependent processes. Because the knowledge of large portions of PESs is often needed, the simulations require a very large number of electronic structure calculations, which limits the NAMD applicability to relatively small molecular systems and ultrafast kinetics.In this Account, we discuss our contribution to the development of the NAST and NAMD approaches for predicting the rates and mechanism of spin-dependent processes. First, we briefly describe our NAST and NAMD implementations. The NAST implementation is an extension of the transition state theory to the processes involving two crossing potential energy surfaces of different spin multiplicities. The NAMD approach includes the trajectory surface hopping (TSH) and ab initio multiple spawning (AIMS) methods. Second, we discuss several applications of NAST and NAMD to model spin-dependent processes in different systems. The NAST applicability to large complex systems is demonstrated by the studies of the spin-forbidden isomerization of the active sites of metal-sulfur proteins. Our implementation of the MECP search algorithm within the fully ab initio fragment molecular orbital method allows applying NAST to systems with thousands of atoms, such as the solvated protein rubredoxin. Applications of NAMD to ultrafast spin-dependent processes are represented by the generalized AIMS simulations utilizing the fast GPU-based TeraChem electronic structure program to gain insight into the complex photoexcited state relaxation in 2-cyclopentenone.

Evolution of Cytochrome P450 Enzymes and Their Redox Partners in Archaea

Cytochrome P450 monooxygenases (CYPs/P450s) and their redox partners, ferredoxins, are ubiquitous in organisms. P450s have been studied in biology for over six decades owing to their distinct catalytic activities, including their role in drug metabolism. Ferredoxins are ancient proteins involved in oxidation-reduction reactions, such as transferring electrons to P450s. The evolution and diversification of P450s in various organisms have received little attention and no information is available for archaea. This study is aimed at addressing this research gap. Genome-wide analysis revealed 1204 P450s belonging to 34 P450 families and 112 P450 subfamilies, where some families and subfamilies are expanded in archaea. We also identified 353 ferredoxins belonging to the four types 2Fe-2S, 3Fe-4S, 7Fe-4S and 2[4Fe-4S] in 40 archaeal species. We found that bacteria and archaea shared the CYP109, CYP147 and CYP197 families, as well as several ferredoxin subtypes, and that these genes are co-present on archaeal plasmids and chromosomes, implying the plasmid-mediated lateral transfer of these genes from bacteria to archaea. The absence of ferredoxins and ferredoxin reductases in the P450 operons suggests that the lateral transfer of these genes is independent. We present different scenarios for the evolution and diversification of P450s and ferredoxins in archaea. Based on the phylogenetic analysis and high affinity to diverged P450s, we propose that archaeal P450s could have diverged from CYP109, CYP147 and CYP197. Based on this study's results, we propose that all archaeal P450s are bacterial in origin and that the original archaea had no P450s.

Valence Localization in Alkyne and Alkene Adducts of Synthetic [Fe4S4]+ Clusters

Reported herein are alkyne and alkene adducts of synthetic [Fe₄S₄]⁺ clusters that model intermediates and inhibitor-bound states in enzymes involved in isoprenoid biosynthesis. Treatment of the N-heterocyclic carbene-ligated cluster [(IMes)₃Fe₄S₄(OEt₂)][BAr^F₄] (IMes = 1,3-dimesitylimidazol-2-ylidene; [BAr^F₄]^- = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate) with phenylacetylene (PhCCH) or cis-cyclooctene (COE) results in displacement of the Et₂O ligand to yield the corresponding π complexes, [(IMes)₃Fe₄S₄(PhCCH)][BAr^F₄] and [(IMes)₃Fe₄S₄(COE)][BAr^F₄]. EPR spectroscopic analysis demonstrates that both clusters are doublets with g_iso > 2 and thus are spectroscopically faithful models of the analogous species characterized in the isoprenoid biosynthetic enzymes IspG and IspH. Structural and Mössbauer spectroscopic analysis reveals that both complexes are best described as [Fe₄S₄]⁺ clusters in which the unique Fe site engages in modest back-bonding to the π-acidic ligand. Paramagnetic NMR studies show that, even at room temperature, the alkyne/alkene-bound Fe centers harbor minority spin and therefore adopt an Fe²⁺ valence. We propose that such valence localization could likewise occur in Fe-S enzymes that interact with π-acidic molecules.

An Open-Cuboidal [Fe3S4] Cluster Characterized in Both Biologically Relevant Redox States

Synthetic analogues of the three common types of Fe-S clusters found in biology─diamond-core [Fe₂S₂] clusters, open-cuboidal [Fe₃S₄] clusters, and cuboidal [Fe₄S₄] clusters─have been reported in each biologically relevant redox state with one exception: the open-cuboidal [Fe₃S₄]⁺ cluster. Here, we describe the synthesis and characterization of an open-cuboidal [Fe₃S₄] cluster in both biologically relevant redox states: [Fe₃S₄]⁺ and [Fe₃S₄]⁰. Like their biological counterparts, the oxidized cluster has a spin-canted, S = ¹/₂ ground state, and the reduced cluster has an S = 2 ground state. Structural analysis reveals that the [Fe₃S₄] core undergoes substantial contraction upon oxidation, in contrast to the minimal structural changes observed for the only [Fe₃S₄] protein for which high-resolution structures are available in both redox states (Azotobacter vinelandii ferredoxin I; Av FdI). This difference between the synthetic models and Av FdI is discussed in the context of electron transfer by [Fe₃S₄] proteins.

Structural insight into halide-coordinated [Fe4S4XnY4-n]2- clusters (X, Y = Cl, Br, I) by XRD and Mössbauer spectroscopy

Iron sulphur halide clusters [Fe₄S₄Br₄]^2- and [Fe₄S₄X₂Y₂]^2- (X, Y = Cl, Br, I) were obtained in excellent yields (77 to 78%) and purity from [Fe(CO)₅], elemental sulphur, I₂ and benzyltrimethylammonium (BTMA⁺) iodide, bromide and chloride. Single crystals of (BTMA)₂[Fe₄S₄Br₄] (1), (BTMA)₂[Fe₄S₄Br₂Cl₂] (2), (BTMA)₂[Fe₄S₄Cl₂I₂] (3), and (BTMA)₂[Fe₄S₄Br₂I₂] (4) were isostructural to the previously reported (BTMA)₂[Fe₄S₄I₄] (5) (monoclinic, Cc). Instead of the chloride cubane cluster [Fe₄S₄Cl₄]^2-, we found the prismane-shaped cluster (BTMA)₃[Fe₆S₆Cl₆] (6) (P1̄). ⁵⁷Fe Mössbauer spectroscopy indicates complete delocalisation with Fe^2.5+ oxidation states for all iron atoms. Magnetic measurements showed small χ_MT values at 298 K ranging from 1.12 to 1.54 cm³ K mol^-1, indicating the dominant antiferromagnetic exchange interactions. With decreasing temperature, the χ_MT values decreased to reach a plateau at around 100 K. From about 20 K, the values drop significantly. Fitting the data in the Heisenberg-Dirac-van Vleck (HDvV) as well as the Heisenberg Double Exchange (HDE) formalism confirmed the delocalisation and antiferromagnetic coupling assumed from Mössbauer spectroscopy.

Metal-Support Interactions in Molecular Single-Site Cluster Catalysts

This study provides atomistic insights into the interface between a single-site catalyst and a transition metal chalcogenide support and reveals that peak catalytic activity occurs when edge/support redox cooperativity is maximized. A molecular platform MCo₆Se₈(PEt₃)₄(L)₂ (1-M, M = Cr, Mn, Fe, Co, Cu, and Zn) was designed in which the active site (M)/support (Co₆Se₈) interactions are interrogated by systematically probing the electronic and structural changes that occur as the identity of the metal varies. All 3d transition metal 1-M clusters display remarkable catalytic activity for coupling tosyl azide and tert-butyl isocyanide, with Mn and Co derivatives showing the fastest turnover in the series. Structural, electronic, and magnetic characterization of the clusters was performed using single crystal X-ray diffraction, ¹H and ³¹P nuclear magnetic resonance spectroscopy, electronic absorption spectroscopy, cyclic voltammetry, and computational methods. Distinct metal/support redox regimes can be accessed in 1-M based on the energy of the edge metal's frontier orbitals with respect to those of the cluster support. As the degree of electronic interaction between the edge and the support increases, a cooperative regime is reached wherein the support can deliver electrons to the catalytic site, increasing the reactivity of key metal-nitrenoid intermediates.

Four-Coordinate Fe N2 and Imido Complexes Supported by a Hemilabile NNC Heteroscorpionate Ligand

Inspired by mechanistic proposals for N2 reduction at the nitrogenase FeMo cofactor, we report herein a new, strongly σ-donating heteroscorpionate ligand featuring two weak-field pyrazoles and an alkyl donor. This ligand supports four-coordinate Fe(I)-N2, Fe(II)-Cl, and Fe(III)-imido complexes, which we have characterized using a variety of spectroscopic and computational methods. Structural and quantum mechanical analysis reveal the nature of the Fe-C bonds to be essentially invariant between the complexes, with conversion between the (formally) low-valent Fe-N2 and high-valent Fe-imido complexes mediated by pyrazole hemilability. This presents a useful strategy for substrate reduction at such low-coordinate centers and suggests a mechanism by which FeMoco might accommodate the binding of both π-acidic and π-basic nitrogenous substrates.

Reversible Alkyl-Group Migration between Iron and Sulfur in [Fe4S4] Clusters

Synthetic [Fe4S4] clusters with Fe-R groups (R = alkyl/benzyl) are shown to release organic radicals on an [Fe4S4]3+-R/[Fe4S4]2+ redox couple, the same that has been proposed for a radical-generating intermediate in the superfamily of radical S-adenosyl-l-methionine (SAM) enzymes. In attempts to trap the immediate precursor to radical generation, a species in which the alkyl group has migrated from Fe to S is instead isolated. This S-alkylated cluster is a structurally faithful model of intermediates proposed in a variety of functionally diverse S transferase enzymes and features an "[Fe4S4]+-like" core that exists as a physical mixture of S = 1/2 and 7/2 states. The latter corresponds to an unusual, valence-localized electronic structure as indicated by distortions in its geometric structure and supported by computational analysis. Fe-to-S alkyl group migration is (electro)chemically reversible, and the preference for Fe vs S alkylation is dictated by the redox state of the cluster. These findings link the organoiron and organosulfur chemistry of Fe-S clusters and are discussed in the context of metalloenzymes that are proposed to make and break Fe-S and/or C-S bonds during catalysis.

Nitrogen reduction by the Fe sites of synthetic [Mo3S4Fe] cubes

Nitrogen (N₂) fixation by nature, which is a crucial process for the supply of bio-available forms of nitrogen, is performed by nitrogenase. This enzyme uses a unique transition-metal-sulfur-carbon cluster as its active-site co-factor ([(R-homocitrate)MoFe₇S₉C], FeMoco)^1,2, and the sulfur-surrounded iron (Fe) atoms have been postulated to capture and reduce N₂ (refs. ^3-6). Although there are a few examples of synthetic counterparts of the FeMoco, metal-sulfur cluster, which have shown binding of N₂ (refs. ^7-9), the reduction of N₂ by any synthetic metal-sulfur cluster or by the extracted form of FeMoco¹⁰ has remained elusive, despite nearly 50 years of research. Here we show that the Fe atoms in our synthetic [Mo₃S₄Fe] cubes^11,12 can capture a N₂ molecule and catalyse N₂ silylation to form N(SiMe₃)₃ under treatment with excess sodium and trimethylsilyl chloride. These results exemplify the catalytic silylation of N₂ by a synthetic metal-sulfur cluster and demonstrate the N₂-reduction capability of Fe atoms in a sulfur-rich environment, which is reminiscent of the ability of FeMoco to bind and activate N₂.

Evidence for Low-Valent Electronic Configurations in Iron-Sulfur Clusters

Although biological iron-sulfur (Fe-S) clusters perform some of the most difficult redox reactions in nature, they are thought to be composed exclusively of Fe²⁺ and Fe³⁺ ions, as well as mixed-valent pairs with average oxidation states of Fe^2.5+. We herein show that Fe-S clusters formally composed of these valences can access a wider range of electronic configurations─in particular, those featuring low-valent Fe¹⁺ centers. We demonstrate that CO binding to a synthetic [Fe₄S₄]⁰ cluster supported by N-heterocyclic carbene ligands induces the generation of Fe¹⁺ centers via intracluster electron transfer, wherein a neighboring pair of Fe²⁺ sites reduces the CO-bound site to a low-valent Fe¹⁺ state. Similarly, CO binding to an [Fe₄S₄]⁺ cluster induces electron delocalization with a neighboring Fe site to form a mixed-valent Fe^1.5+Fe^2.5+ pair in which the CO-bound site adopts partial low-valent character. These low-valent configurations engender remarkable C-O bond activation without having to traverse highly negative and physiologically inaccessible [Fe₄S₄]⁰/[Fe₄S₄]^- redox couples.

S K-edge XAS of CuII, CuI, and ZnII oxidized Dithiolene complexes: Covalent contributions to structure and the Jahn-Teller effect

Reduced dithiolene ligands are bound to high valent Mo centers in the active site of the oxotransferase family of enzymes. Related model complexes have been studied with great insight by Prof. Holm and his colleagues. This study focuses on the other limit of dithiolene chemistry: an investigation of the 2-electron oxidized dithiolene bound to low-valent late transition metal (TM) ions (ZnII, CuI, and CuII). The bonding descriptions of the oxidized dithiolene [N,N-dimethyl piperazine 2,3-dithione (Me2Dt0)] complexes are probed using S K-edge X-ray absorption spectroscopy (XAS) and the results are correlated to density functional theory (DFT) calculations. These experimentally supported calculations are then extended to explain the different geometric structures of the three complexes. The ZnII(Me2Dt0)2 complex has only ligand-ligand repulsion so it is stabilized at the D2d symmetry limit. The CuI(Me2Dt0)2 complex has additional weak backbonding thus distorts somewhat from D2d toward D2h symmetry. The CuII(Me2Dt0)2 complex has a strong σ donor bond that leads to both a large Jahn-Teller stabilization to D2h and an additional covalent contribution to the geometry. The combined strong stabilization results in the square planar, D2h structure. This study quantifies the competition between the ligand-ligand repulsion and the change in electronic structures in determining the final geometric structures of the oxidized dithiolene complexes, and provides quantitative insights into the Jahn-Teller stabilization energy and its origin.

Computational Approach for Probing Redox Potential for Iron-Sulfur Clusters in Photosystem I

Photosystem I is a light-driven electron transfer device. Available X-ray crystal structure from Thermosynechococcus elongatus showed that electron transfer pathways consist of two nearly symmetric branches of cofactors converging at the first iron-sulfur cluster FX, which is followed by two terminal iron-sulfur clusters FA and FB. Experiments have shown that FX has lower oxidation potential than FA and FB, which facilitates the electron transfer reaction. Here, we use density functional theory and Multi-Conformer Continuum Electrostatics to explain the differences in the midpoint Em potentials of the FX, FA and FB clusters. Our calculations show that FX has the lowest oxidation potential compared to FA and FB due to strong pairwise electrostatic interactions with surrounding residues. These interactions are shown to be dominated by the bridging sulfurs and cysteine ligands, which may be attributed to the shorter average bond distances between the oxidized Fe ion and ligating sulfurs for FX compared to FA and FB. Moreover, the electrostatic repulsion between the 4Fe-4S clusters and the positive potential of the backbone atoms is lowest for FX compared to both FA and FB. These results agree with the experimental measurements from the redox titrations of low-temperature EPR signals and of room temperature recombination kinetics.

Stepwise Construction of Mo-Fe-S Clusters Using a LEGO Strategy

The rational synthesis of iron-sulfur clusters with excellent control of the core ligands has been a significant challenge in biomimetic chemistry. In this work, the rational construction of versatile Mo-Fe-S cubane clusters was realized using a LEGO strategy. (LEGO is a line of plastic construction toys consisting of various interlocking plastic bricks which can be assembled and connected in different ways to construct versatile objects. Herein we use "LEGO strategy" as an analogy for the stepwise synthetic methodology, and we use "brick" to represent a corner atom of the cubane structure.) Through careful synthetic control, the ⟨Fe⟩, ⟨S⟩, and ⟨Cl⟩ bricks were mounted piece-by-piece onto the basic ⟨MoS₃⟩ frame to stepwise construct the incomplete cubane core ⟨MoFe₂S₃Cl⟩ and the complete cubane core ⟨MoFe₃S₃Cl⟩. The significantly elongated Fe-Cl bonds for the bridging chlorides in the ⟨MoFe₂S₃Cl⟩ and ⟨MoFe₃S₃Cl⟩ cores permit ligand metatheses to introduce 2p donors at the bridging sites, which used to be a challenge in traditional iron-sulfur chemistry. Therefore, in subsequent controlled reactions, the bridging ⟨Cl⟩ bricks of the ⟨MoFe₂S₃Cl⟩ and ⟨MoFe₃S₃Cl⟩ frames could be easily replaced by ⟨N⟩ , ⟨O⟩, or ⟨S⟩ bricks to generate the ⟨MoFe₂S₃N⟩, ⟨MoFe₂S₃O⟩, ⟨MoFe₃S₃N⟩, and ⟨MoFe₃S₄⟩ cluster cores, demonstrating more choices for the LEGO synthetic strategy. The series of Mo-Fe-S clusters and their derivatives, together with related synthetic strategies, offers a good platform and methodology for biomimetic chemistry in relation to nitrogenase, especially the FeMo cofactor.

Methods to identify and characterize iron-sulfur oligopeptides in water

Iron-sulfur clusters are ubiquitous cofactors that mediate central biological processes. However, despite their long history, these metallocofactors remain challenging to investigate when coordinated to small (≤ six amino acids) oligopeptides in aqueous solution. In addition to being often unstable in vitro, iron-sulfur clusters can be found in a wide variety of forms with varied characteristics, which makes it difficult to easily discern what is in solution. This difficulty is compounded by the dynamics of iron-sulfur peptides, which frequently coordinate multiple types of clusters simultaneously. To aid investigations of such complex samples, a summary of data from multiple techniques used to characterize both iron-sulfur proteins and peptides is provided. Although not all spectroscopic techniques are equally insightful, it is possible to use several, readily available methods to gain insight into the complex composition of aqueous solutions of iron-sulfur peptides.

Redox-Switchable Allosteric Effects in Molecular Clusters

We demonstrate that allosteric effects and redox state changes can be harnessed to create a switch that selectively and reversibly regulates the coordination chemistry of a single site on the surface of a molecular cluster. This redox-switchable allostery is employed as a guiding force to assemble the molecular clusters Zn₃Co₆Se₈L'₆ (L' = Ph₂PN(H)Tol, Ph = phenyl, Tol = 4-tolyl) into materials of predetermined dimensionality (1- or 2-D) and to encode them with emissive properties. This work paves the path to program the assembly and function of inorganic clusters into stimuli-responsive, atomically precise materials.

The Reductive Dehydroxylation Catalyzed by IspH, a Source of Inspiration for the Development of Novel Anti-Infectives

The non-mevalonate or also called MEP pathway is an essential route for the biosynthesis of isoprenoid precursors in most bacteria and in microorganisms belonging to the Apicomplexa phylum, such as the parasite responsible for malaria. The absence of this pathway in mammalians makes it an interesting target for the discovery of novel anti-infectives. As last enzyme of this pathway, IspH is an oxygen sensitive [4Fe-4S] metalloenzyme that catalyzes 2H⁺/2e⁻ reductions and a water elimination by involving non-conventional bioinorganic and bioorganometallic intermediates. After a detailed description of the discovery of the [4Fe-4S] cluster of IspH, this review focuses on the IspH mechanism discussing the results that have been obtained in the last decades using an approach combining chemistry, enzymology, crystallography, spectroscopies, and docking calculations. Considering the interesting druggability of this enzyme, a section about the inhibitors of IspH discovered up to now is reported as well. The presented results constitute a useful and rational help to inaugurate the design and development of new potential chemotherapeutics against pathogenic organisms.

Dioxygen reactivity of a biomimetic [4Fe-4S] compound exhibits [4Fe-4S] to [2Fe-2S] cluster conversion

Fumarate and nitrate reductase (FNR) is a gene regulatory protein that controls anaerobic to aerobic respiration in Escherichia coli, for which O₂ serves as a control switch to induce a protein structural change by converting [4Fe-4S] cofactors to [2Fe-2S] clusters. Although biomimetic models can aid in understanding the complex functions of their protein counterparts, the inherent sensitivity of discrete [Fe-S] molecules to aerobic conditions poses a unique challenge to mimic the O₂-sensing capability of FNR. Herein, we report unprecedented biomimetic O₂ reactivity of a discrete [4Fe-4S] complex, [Fe₄S₄(SPh^F)₄]^2- (1) where SPh^F is 4-fluorothiophenolate, in which the reaction of 1 with O_2(g) in the presence of thiolate produces its [2Fe-2S] analogue, [Fe₂S₂(SPh^F)₄]^2- (2), at room temperature. The cluster conversion of 1 to 2 can also be achieved by employing disulfide as an oxidant under the same reaction conditions. The [4Fe-4S] to [2Fe-2S] cluster conversion by O₂ was found to be significantly faster than that by disulfide, while the reaction with disulfide produced higher yields of 2.