Chemical and biochemical analysis using scanning force microscopy

Simulations of Friction Anisotropy on Self-Assembled Monolayers in Water

Molecular dynamics simulations were performed to study nanoscale friction on hydrophilic and hydrophobic self-assembled monolayers (SAMs) immersed in water. Sliding was simulated in two different directions to capture anisotropy due to the direction of motion relative to the inherent tilted orientation of the molecules. It was shown that friction depends on both hydrophobicity and sliding direction, with the highest friction observed for sliding on hydrophobic SAM in the direction against the initial orientation of the molecules. The origins of the friction trends were analyzed by differentiating the tip-SAM and tip-water force contributions to friction. The tip-water force was higher on the hydrophilic SAM, and this was shown to be due to the presence of a dense layer of water adjacent to the surface and hydrogen bonding. In contrast, the tip-SAM force was higher on the hydrophobic SAM due to a water depletion layer, which enabled the tip to be closer to the SAM terminal group. The higher-friction cases all exhibited greater penetration of the tip below the surface of the SAM, accommodated by further tilting and reorientation of the SAM molecules.

Biosensing, Characterization of Biosensors, and Improved Drug Delivery Approaches Using Atomic Force Microscopy: A Review

Since its invention, atomic force microscopy (AFM) has come forth as a powerful member of the “scanning probe microscopy” (SPM) family and an unparallel platform for high-resolution imaging and characterization for inorganic and organic samples, especially biomolecules, biosensors, proteins, DNA, and live cells. AFM characterizes any sample by measuring interaction force between the AFM cantilever tip (the probe) and the sample surface, and it is advantageous over other SPM and electron micron microscopy techniques as it can visualize and characterize samples in liquid, ambient air, and vacuum. Therefore, it permits visualization of three-dimensional surface profiles of biological specimens in the near-physiological environment without sacrificing their native structures and functions and without using laborious sample preparation protocols such as freeze-drying, staining, metal coating, staining, or labeling. Biosensors are devices comprising a biological or biologically extracted material (assimilated in a physicochemical transducer) that are utilized to yield electronic signal proportional to the specific analyte concentration. These devices utilize particular biochemical reactions moderated by isolated tissues, enzymes, organelles, and immune system for detecting chemical compounds via thermal, optical, or electrical signals. Other than performing high-resolution imaging and nanomechanical characterization (e.g., determining Young’s modulus, adhesion, and deformation) of biosensors, AFM cantilever (with a ligand functionalized tip) can be transformed into a biosensor (microcantilever-based biosensors) to probe interactions with a particular receptors of choice on live cells at a single-molecule level (using AFM-based single-molecule force spectroscopy techniques) and determine interaction forces and binding kinetics of ligand receptor interactions. Targeted drug delivery systems or vehicles composed of nanoparticles are crucial in novel therapeutics. These systems leverage the idea of targeted delivery of the drug to the desired locations to reduce side effects. AFM is becoming an extremely useful tool in figuring out the topographical and nanomechanical properties of these nanoparticles and other drug delivery carriers. AFM also helps determine binding probabilities and interaction forces of these drug delivery carriers with the targeted receptors and choose the better agent for drug delivery vehicle by introducing competitive binding. In this review, we summarize contributions made by us and other researchers so far that showcase AFM as biosensors, to characterize other sensors, to improve drug delivery approaches, and to discuss future possibilities.

Molecularly-tunable nanoelectrode arrays created by harnessing intermolecular interactions

Intermolecular interactions play a critical role in the binding strength of molecular assemblies on surfaces. The ability to harness them enables molecularly-tunable interfacial structures and properties. Herein we report the tuning of the intermolecular interactions in monolayer assemblies derived from organothiols of different structures for the creation of nanoelectrode arrays or ensembles with effective mass transport by a molecular-level perforation strategy. The homo- and hetero-intermolecular interactions can be fully controlled, which is demonstrated not only by thermodynamic analysis of the fractional coverage but also by surface infrared reflection absorption and X-ray photoelectron spectroscopic characterizations. This understanding enables controllable electrochemical perforation for the creation of ensembles or arrays of channels across the monolayer thickness with molecular and nanoscale dimensions. Redox reactions on the nanoelectrode array display molecular tunability with a radial diffusion characteristic in good agreement with theoretical simulation results. These findings have implications for designing membrane-type ion-gating, electrochemical sensing, and electrochemical energy storage devices with molecular level tunability.

Intermolecular interactions in monolayer assembly are harnessed for creating molecularly-tunable nanoelectrode arrays or ensembles.

Electrochemical Biosensing System for Single Cells, Cellular Aggregates and Microenvironments

Applications of electrochemical biosensing for surveying intact cells and tissues have been focus of attention. Two experimental approaches have been used when performing amperometric measurements on biological cells, the stylus-type microelectrode probes and the electrode-integrated microdevices based on lithographic technologies. For the probe scanning approach, various types of microsensors were developed to monitor localized physical or chemical natures at a variety of surfaces in situ under wet conditions. Scanning electrochemical microscopy (SECM) has been applied for monitoring local oxygen, enzyme activity, and collection of transcripts. For the non-scanning type of approach, electrode array devices allow very rapid response, parallel monitoring, and multi-analyte assay. Sveral topics of on-chip-culture system were introduced especially concerning on gene expression monitoring by reporter system and reconstruction of in vivo-like nature by controlling microenvironments. Electrochemical reporter assay has been demonstrated to monitor the gene expression process of the gene-modified cultured cells. Long-term monitoring of cellular function of spheroids and three dimensionally-cultured cells were carried out by controlling microenvironments on the cellular chip.

Studies on the ultrastructure in Anacardium occidentale L. leaves from Amazon in northern Brazil by scanning microscopy

Leaves surfaces have various structures with specific functions and contribute to the relationship with the environment. On morphological studies are analyzed various parameters, ranging from macro scale through the micro scale to the nanometer scale, which contribute to the study of taxonomy, pharmacognosy, and ecology, among others. Functional structures found in leaves are responsible for the wide variety of surfaces and some behaviors are given in terms of cellular adaptation and the presence or absence of wax. This study reports the characterization of Anacardium occidentale L. leaf surface and the techniques used therein. A set of scanning electron microscope (SEM) and atomic force microscope (AFM) images performed on fresh leaf allowed observation of textured and heterogeneous profiles on both sides. SCANNING 38:329-335, 2016. © 2015 Wiley Periodicals, Inc.

Morphology-controlled synthesis of NiO films: the role of the precursor and the effect of the substrate nature on the films' structural/optical properties

NiO thin films were grown through MOCVD on quartz and LaAlO₃ (001) single crystal substrates. The relationship between the precursor/substrate nature and film properties allowed to define the best conditions to grow good quality NiO films.

Insights into the effects of metal nanostructuring and oxidation on the work function and charge transfer of metal/graphene hybrids

Graphene/metal heterojunctions are ubiquitous in graphene-based devices and, therefore, have attracted increasing interest of researchers. Indeed, the literature on the field reports apparently contradictory results about the effect of a metal on graphene doping. Here, we elucidate the effect of metal nanostructuring and oxidation on the metal work function (WF) and, consequently, on the charge transfer and doping of graphene/metal hybrids. We show that nanostructuring and oxidation of metals provide a valid support to frame WF and doping variation in metal/graphene hybrids. Chemical vapour-deposited monolayer graphene has been transferred onto a variety of metal surfaces, including d-metals, such as Ag, Au, and Cu, and sp-metals, such as Al and Ga, configured as thin films or nanoparticle (NP) ensembles of various average sizes. The metal-induced charge transfer and the doping of graphene have been investigated using Kelvin probe force microscopy (KPFM), and corroborated by Raman spectroscopy and plasmonic ellipsometric spectroscopy. We show that when the appropriate WF of the metal is considered, without any assumption, taking into account WF variations by nanostructure and/or oxidation, a linear relationship between the metal WF and the doping of graphene is found. Specifically, for all metals, nanostructuring lowers the metal WF. In addition, using gold as an example, a critical metal nanoparticle size is found at which the direction of charge transfer, and consequently graphene doping, is inverted.

Quantitative description of thermodynamic and kinetic properties of the platelet factor 4/heparin bonds

Heparin is the most important antithrombotic drug in hospitals. It binds to the endogenous tetrameric protein platelet factor 4 (PF4) forming PF4/heparin complexes which may cause a severe immune-mediated adverse drug reaction, so-called heparin-induced thrombocytopenia (HIT). Although new heparin drugs have been synthesized to reduce such a risk, detailed bond dynamics of the PF4/heparin complexes have not been clearly understood. In this study, single molecule force spectroscopy (SMFS) is utilized to characterize the interaction of PF4 with heparins of defined length (5-, 6-, 8-, 12-, and 16-mers). Analysis of the force-distance curves shows that PF4/heparin binding strength rises with increasing heparin length. In addition, two binding pathways in the PF4/short heparins (≤8-mers) and three binding pathways in the PF4/long heparins (≥8-mers) are identified. We provide a model for the PF4/heparin complexes in which short heparins bind to one PF4 tetramer, while long heparins bind to two PF4 tetramers. We propose that the interaction between long heparins and PF4s is not only due to charge differences as generally assumed, but also due to hydrophobic interaction between two PF4s which are brought close to each other by long heparin. This complicated interaction induces PF4/heparin complexes more stable than other ligand-receptor interactions. Our results also reveal that the boundary between antigenic and non-antigenic heparins is between 8- and 12-mers. These observations are particularly important to understand processes in which PF4-heparin interactions are involved and to develop new heparin-derived drugs.

An experimental study on the stiffness of size-isolated microbubbles using atomic force microscopy

To fully assess contrast-enhanced acoustic bioeffects in diagnostic and therapeutic procedures, the mechanical properties of microbubbles need to be considered. In the present study, direct measurements of the microbubble stiffness were performed using atomic force microscopy by applying nanoscale compressions (up to 25 nN/s) on size-isolated, lipidcoated microbubbles (diameter ranges of 4 to 6 μm and 6 to 8 μm). The stiffness was found to lie between 4 and 22 mN/m and to decrease exponentially with the microbubble size within the diameter range investigated. No cantilever spring constant effect was found on the measured stiffness. The Young's modulus of the size-isolated microbubbles used in our study ranged between 0.4 and 2 MPa. Microstructures on the surface of the microbubbles were found to influence the overall microbubble elasticity. Our results indicated that more detailed theoretical models are needed to account for the size-dependent microbubble mechanical properties to accurately predict their acoustic behavior. The findings provided useful insights into guidance of cavitation-induced drug and gene delivery and could be used as part of the framework in studies on the shear stresses induced on the blood vessel walls by oscillating microbubbles.

The concept of a near-field Raman probe

This article considers the possibility to use tips, which are functionalised by Raman active molecules, as new Raman probes for near-field optics in such a way that the Raman spectrum can be recorded of such a tip. If the Raman spectrum of the probe molecules is sensitive to their immediate environment, the probe can be used to map a surface by its local influence on the Raman spectrum of the probe. This new concept may be very promising for the investigation of specific interactions at the nanoscale by an optical response. Examples of the sensitivity of such a probe to the local environment are presented as a basis for further development of such a probe.

Columnar aggregates of crown ether substituted phthalocyanines perpendicularly anchored on a surface via a selective binding site

The purpose of this work is to anchor perpendicularly to a surface the aggregates obtained by complexation of crown-ether substituted lutetium bisphthalocyanine, [(15 C 5)4 Pc ]2 Lu , in the presence of KSCN . In order to orientate these aggregates perpendicularly to the substrate, silica surface is grafted with an unsymmetrical lutetium bisphthalocyanine substituted, on one macrocycle by four crown ether subunits, and on the other one with four lateral chains terminated by a carboxylic group. The latter compound is used as a selective binding site to anchor pillar-like aggregates formed in solution. The aggregates were characterized in a mixture of chloroformic based solution by UV-visible and light scattering experiments and gave evidence for the formation of rod-like particles in the presence of excess of KSCN . Then, the aggregates were deposited on surfaces and their morphologies were studied by atomic force microscopy (AFM). In the case of substrates having non-specific binding sites such as silica and functionalized silica with 3-trimethoxy-propylaminosilane, rods were observed lying parallel on the surface. In the case of the substrate grafted with the selective binding site, single columns of these supramolecular assemblies perpendicular to the surface have been observed by AFM.

High-speed force load in force measurement in liquid using scanning probe microscope

This article presents an inversion-based iterative feedforward-feedback (II-FF/FB) approach to achieve high-speed force load in force measurement of soft materials in liquid using scanning probe microscope (SPM). SPM force measurement under liquid environment is needed to interrogate a wide range of soft materials, particularly live biological samples. Moreover, when dynamic evolution of the sample occurs during the measurement, and/or measuring the rate-dependent viscoelasticity of the sample, the force measurement also needs to be acquired at high-speed. Precision force load in liquid, however, is challenged by adverse effects including the thermal drift effect, the reduction of the signal to noise ratio, the distributive hydrodynamic force effect, and the hysteresis and vibrational dynamics effects of the piezoelectric actuators (for positioning the probe relative to the sample), particularly during high-speed measurement. Thus, the main contribution of the article is the development of the II-FF/FB approach to tackle these challenges. The proposed method is illustrated through an experimental implementation to the force-curve measurement of a poly (dimethylsiloxane) sample in liquid at high-speed.

Solvation in hydrofluoroalkanes: how can ethanol help?

Objectives

The goal of this work was to evaluate the ability of ethanol mixed with hydrofluoroalkanes (HFAs) to improve solvation of moieties of relevance to pressurized metered-dose inhalers (pMDIs).

Methods

Chemical force microscopy was used to measure the adhesion force (Fad) between alkyl-based, ether-based and ester-based moieties (C8/C8, COC/COC and COOC/COOC interactions) in 2H,3H-perfluoropentane (HPFP)/ethanol mixtures. HPFP is a liquid that mimics propellant HFAs. The Fad results are thus a measure of solvation in HFAs. Johnson–Kendall–Roberts (JKR) theory was used to model the results.

Key findings

The Fad normalized by the tip radius of curvature (Fad/R) decreased upon the addition of ethanol, suggesting its ability to enhance the solvent environment. At 15% (v/v) ethanol, the Fad/R was reduced 34% for the alkyl, 63% for the ether, and down 67% for the ester tails. Thus, the solvation could be ranked as: ester > ether > alkyl. JKR theory was a reasonable model for the Fad/R.

Conclusions

Ethanol, within the concentration range of interest in commercial pMDIs, provided limited enhancement in solvation of alkyl moieties. On the other hand, the cosolvent significantly enhanced solvation of ether-based and ester-based moieties, thus suggesting its potential for formulations containing amphiphiles with such groups.

Nanoscale Deformation and Nanomechanical Properties of Soft Matter Study Cases: Polydimethylsiloxane, Cells and Tissues

Nanoindentation technique was used to investigate the nanomechanical behaviour of different soft materials. Polydimethylsiloxane (PDMS), cells and tissues were examined. The nanomechanical properties (with loading rate and creep study), namely, the hardness () and the elastic modulus () of PDMS, were determined. A classical Hertzian contact analysis was also performed in order to obtain values of . Moreover, the plastic deformation where no load had yet been applied to PDMS was investigated (zero load plastic deformation). Finally, the difficulties of measuring the nanomechanical properties (&) of cells and tissues were evaluated, showing the need for a modification of the current experimental protocols for preparing and mechanically testing in a mode that maintains their structure and their biological functioning in order to make indentation results more reproducible. Additionally, finite element method is used in order to simulate the nanoindentation of PDMS in correlation with experimental data.

Nanomechanics of the Cartilage Extracellular Matrix

Cartilage is a hydrated biomacromolecular fiber composite located at the ends of long bones that enables proper joint lubrication, articulation, loading, and energy dissipation. Degradation of extracellular matrix molecular components and changes in their nanoscale structure greatly influence the macroscale behavior of the tissue and result in dysfunction with age, injury, and diseases such as osteoarthritis. Here, the application of the field of nanomechanics to cartilage is reviewed. Nanomechanics involves the measurement and prediction of nanoscale forces and displacements, intra- and intermolecular interactions, spatially varying mechanical properties, and other mechanical phenomena existing at small length scales. Experimental nanomechanics and theoretical nanomechanics have been applied to cartilage at varying levels of material complexity, e.g., nanoscale properties of intact tissue, the matrix associated with single cells, biomimetic molecular assemblies, and individual extracellular matrix biomolecules (such as aggrecan, collagen, and hyaluronan). These studies have contributed to establishing a fundamental mechanism-based understanding of native and engineered cartilage tissue function, quality, and pathology.

Sampling protein form and function with the atomic force microscope

To study the structure, function, and interactions of proteins, a plethora of techniques is available. Many techniques sample such parameters in non-physiological environments (e.g. in air, ice, or vacuum). Atomic force microscopy (AFM), however, is a powerful biophysical technique that can probe these parameters under physiological buffer conditions. With the atomic force microscope operating under such conditions, it is possible to obtain images of biological structures without requiring labeling and to follow dynamic processes in real time. Furthermore, by operating in force spectroscopy mode, it can probe intramolecular interactions and binding strengths. In structural biology, it has proven its ability to image proteins and protein conformational changes at submolecular resolution, and in proteomics, it is developing as a tool to map surface proteomes and to study protein function by force spectroscopy methods. The power of AFM to combine studies of protein form and protein function enables bridging various research fields to come to a comprehensive, molecular level picture of biological processes. We review the use of AFM imaging and force spectroscopy techniques and discuss the major advances of these experiments in further understanding form and function of proteins at the nanoscale in physiologically relevant environments.

Phase imaging atomic force microscopy in the characterization of biomaterials

The phase imaging atomic force microscopy is a powerful tool in surface characterization of the biomaterials, and the resulting phase image is able to detect chemical variation and reveal more detailed surface properties than the morphological image. However, the chemical- and morphological-dependent phase images were still not distinguished well. In order to better understand actual occurring phase images, we examined non-carious human maxillary incisor, microphase separated polyurethane and self-assembling peptide nanofibres. We herein reported that phase image mainly plotted the morphological change: the phase peak corresponding to the morphological valley, and the morphological peak to the phase valley, and exhibited fine surface structures of materials. The chemical-dependent phase contrast was generally masked by their inherent roughness. For the sample being very rough and having great phase separation, its chemical-dependent phase contrast could be detected at the hard tapping mode ('Amp. Ref. "set point ratio"': -0.4 to -0.8), for the sample with medium roughness only at the light tapping mode ('Amp. Ref.': -0.1 to -0.4). These results will help us understand and determine actual occurring phase images of natural or fabricated biomaterials, even, other materials.

Comparative molecular dynamics study of Abeta adsorption on the self-assembled monolayers

The adsorption and aggregation of the amyloid-beta (Abeta) peptides on the cell membrane plays a causal role in the pathogenesis of Alzheimer's disease. Here, we report all-atom molecular dynamics (MD) simulations to study the interactions of Abeta oligomer with self-assembled monolayers (SAMs) terminated with hydrophobic CH(3) and hydrophilic OH functional groups, with particular interests in how surface chemistry and Abeta orientation affect the adsorption behavior of Abeta. Simulation results show that the CH(3)-SAM has a stronger binding affinity to Abeta than the OH-SAM does, although both surfaces can induce Abeta adsorption. Regardless of the characteristics of the surface, the hydrophobic C-terminal region is more likely to be adsorbed on the SAMs, indicating a preferential orientation and interface for Abeta adsorption. Structural and energetic comparison among six Abeta-SAM systems further reveals that Abeta orientation, SAM surface hydrophobicity, and interfacial waters all determine Abeta adsorption behavior on the surface, highlighting the importance of hydrophobic interactions at the interface. This work may provide parallel insights into the interactions of Abeta with lipid bilayers.

Application of atomic force microscopy in bacterial research

The atomic force microscope (AFM) has evolved from an imaging device into a multifunctional and powerful toolkit for probing the nanostructures and surface components on the exterior of bacterial cells. Currently, the area of application spans a broad range of interesting fields from materials sciences, in which AFM has been used to deposit patterns of thiol-functionalized molecules onto gold substrates, to biological sciences, in which AFM has been employed to study the undesirable bacterial adhesion to implants and catheters or the essential bacterial adhesion to contaminated soil or aquifers. The unique attribute of AFM is the ability to image bacterial surface features, to measure interaction forces of functionalized probes with these features, and to manipulate these features, for example, by measuring elongation forces under physiological conditions and at high lateral resolution (<1 A). The first imaging studies showed the morphology of various biomolecules followed by rapid progress in visualizing whole bacterial cells. The AFM technique gradually developed into a lab-on-a-tip allowing more quantitative analysis of bacterial samples in aqueous liquids and non-contact modes. Recently, force spectroscopy modes, such as chemical force microscopy, single-cell force spectroscopy, and single-molecule force spectroscopy, have been used to map the spatial arrangement of chemical groups and electrical charges on bacterial surfaces, to measure cell-cell interactions, and to stretch biomolecules. In this review, we present the fascinating options offered by the rapid advances in AFM with emphasizes on bacterial research and provide a background for the exciting research articles to follow.

Nanostructured catalysts in fuel cells

One of the most important challenges for the ultimate commercialization of fuel cells is the preparation of active, robust, and low-cost catalysts. This review highlights some findings of our investigations in the last few years in developing advanced approaches to nanostructured catalysts that address this challenge. Emphasis is placed on nanoengineering-based fabrication, processing, and characterization of multimetallic nanoparticles with controllable size (1-10 nm), shape, composition (e.g. Ml(n)M2(100-n), M1(n)M2(m)M3(100-n-m), M1@M2, where M (1 or 2) = Pt, Co, Ni, V, Fe, Cu, Pd, W, Ag, Au etc) and morphology (e.g. alloy, core@shell etc). In addition to an overview of the fundamental issues and the recent progress in fuel cell catalysts, results from evaluations of the electrocatalytic performance of nanoengineered catalysts in fuel cell reactions are discussed. This approach differs from other traditional approaches to the preparation of supported catalysts in the ability to control the particle size, composition, phase, and surface properties. An understanding of how the nanoscale properties of the multimetallic nanoparticles differ from their bulk-scale counterparts, and how the interaction between the nanoparticles and the support materials relates to the size sintering or evolution in the thermal activation process, is also discussed. The fact that the bimetallic gold-platinum nanoparticle system displays a single-phase character different from the miscibility gap known for its bulk-scale counterpart serves as an important indication of the nanoscale manipulation of the structural properties, which is useful for refining the design and preparation of the bimetallic catalysts. The insight gained from probing how nanoparticle-nanoparticle and nanoparticle-substrate interactions relate to the size evolution in the activation process of nanoparticles on planar substrates serves as an important guiding principle in the control of nanoparticle sintering on different support materials. The fact that some of the trimetallic nanoparticle catalysts (e.g. PtVFe or PtNiFe) exhibit electrocatalytic activities in fuel cell reactions which are four-five times higher than in pure Pt catalysts constitutes the basis for further exploration of a variety of multimetallic combinations. The fundamental insights into the control of nanoscale alloy, composition, and core-shell structures have important implications in identifying nanostructured fuel cell catalysts with an optimized balance of catalytic activity and stability.

Thin film assemblies of molecularly-linked metal nanoparticles and multifunctional properties

The use of metal nanoparticles as building blocks toward thin film assembly creates intriguing opportunities for exploring multifunctional properties. Such an exploration requires the ability to engineer the size, shape, composition, and especially interparticle properties in nanoparticle assemblies for harnessing the collective properties of the nanoscale building blocks. This article highlights some of the important findings of our investigations of thin film assemblies of molecularly linked nanoparticles for exploiting their multifunctional and collective properties in molecular recognition and chemical sensing. The thermally activated processing approach presents a viable pathway for nanoengineering metal, alloy, and core-shell nanoparticles as building blocks. The molecular mediator-templating approach offers an effective strategy to thin film assemblies of the nanoscale building blocks that impart multifunctional properties. In such thin film assemblies, the interparticle interactions and structures dictate the correlation between the nanostructural parameters and the optical and electrical properties. By highlighting selected examples involving ligand-framework binding of ionic species at the film/liquid interface and electrical responses to molecular sorption at the film/gas interface, the multifunctional properties of the thin film assemblies are further discussed in terms of interparticle covalent, hydrogen bonding, ionic, or van der Waals interactions in a framework-type architecture for the creation of molecular recognition and chemical sensing sites that can be tuned chemically or electrochemically. Implications of these insights to expanding the exploration of nanoparticle thin film assemblies for a wide range of technological applications are also discussed.

Rotationally induced hydrodynamics: fundamentals and applications to high-speed bioassays

Bioassays are indispensable tools in areas ranging from fundamental life science research to clinical practice. Improving assay speed and levels of detection will have a profound impact in all of these areas. We recently developed a rapid, sensitive format for immunosorbent assays that expedites antigen mass transport by rotating the capture substrate. This review outlines the theoretical foundation of rotationally induced hydrodynamics and its application in heterogeneous assays. We describe a general solution that solves the rates of immunoreactions on rotating capture substrates, taking into account both diffusion and the rate of reaction between antibody and antigen. The general solution applies to a wide range of rotation rates, including mass transport-limited to reaction rate-limited assays, and is validated experimentally. We discuss several applications that demonstrate how immunoassays can be tailored to increase speed as well as lower the limit of detection of viral particles, pathogens, toxins, and proteins.

A direct micropipette-based calibration method for atomic force microscope cantilevers

In this report, we describe a direct method for calibrating atomic force microscope (AFM) cantilevers with the micropipette aspiration technique (MAT). A closely fitting polystyrene bead inside a micropipette is driven by precisely controlled hydrostatic pressures to apply known loads on the sharp tip of AFM cantilevers, thus providing a calibration at the most functionally relevant position. The new method is capable of calibrating cantilevers with spring constants ranging from 0.01 to hundreds of newtons per meter. Under appropriate loading conditions, this new method yields measurement accuracy and precision both within 10%, with higher performance for softer cantilevers. Furthermore, this method may greatly enhance the accuracy and precision of calibration for colloidal probes.

Temperature-enhanced solvent vapor annealing of a C3 symmetric hexa-peri-hexabenzocoronene: controlling the self-assembly from nano- to macroscale

Temperature-enhanced solvent vapor annealing (TESVA) is used to self-assemble functionalized polycyclic aromatic hydrocarbon molecules into ordered macroscopic layers and crystals on solid surfaces. A novel C3 symmetric hexa-peri-hexabenzocoronene functionalized with alternating hydrophilic and hydrophobic side chains is used as a model system since its multivalent character can be expected to offer unique self-assembly properties and behavior in different solvents. TESVA promotes the molecule's long-range mobility, as proven by their diffusion on a Si/SiO(x) surface on a scale of hundreds of micrometers. This leads to self-assembly into large, ordered crystals featuring an edge-on columnar type of arrangement, which differs from the morphologies obtained using conventional solution-processing methods such as spin-coating or drop-casting. The temperature modulation in the TESVA makes it possible to achieve an additional control over the role of hydrodynamic forces in the self-assembly at surfaces, leading to a macroscopic self-healing within the adsorbed film notably improved as compared to conventional solvent vapor annealing. This surface re-organization can be monitored in real time by optical and atomic force microscopy.

Invited review article: a review of techniques for attaching micro- and nanoparticles to a probe's tip for surface force and near-field optical measurements

Cantilevers with single micro- or nanoparticle probes have been widely used for atomic force microscopy surface force measurements and apertureless scanning near-field optical microscopy applications. In this article, I critically review the particle attachment and modification techniques currently available, to help researchers choose the appropriate techniques for specific applications.

The ester group: how hydrofluoroalkane-philic is it?

Pressurized metered-dose inhalers (pMDIs) have been recognized as potential devices for the delivery of systemically acting drugs, including biomolecules, to and through the lungs. Therefore, the development of novel excipients capable of imparting stability to suspension formulations in hydrofluoroalkane (HFA) propellants is of great relevance because many of the drugs of interest are poorly soluble in HFAs. In this work, we use ab initio calculations and chemical force microscopy (CFM) to determine the HFA-philicity of the biodegradable and biocompatible ester moiety quantitatively. The complementary information obtained from the binding energy calculations and adhesion force measurements are used to gain microscopic insight into the relationship between the chemistry of the moiety of interest and its solvation in HFA. A lactide (LA)-based copolymer surfactant was synthesized and characterized, and its ability to stabilize a dispersion of micronized budesonide in HFA227 was demonstrated. These results corroborate the ab initio calculations and CFM and show that the LA-based moiety is a suitable candidate for enhancing the stability of dispersions in HFA-based pMDIs.

Understanding solvation in hydrofluoroalkanes: ab initio calculations and chemical force microscopy

Understanding solvation in hydrofluoroalkane (HFA) propellants is of great importance for the development of novel pressurized metered-dose inhaler (pMDI) formulations. HFA-based pMDIs are not only the most widely used inhalation therapy devices for treating lung diseases, but they also hold promise as vehicles for the systemic delivery of biomolecules to and through the lungs. In this work we propose a combined microscopic experimental and computational approach to quantitatively relate the chemistry of moieties to their HFA-philicity. Binding energy calculations are used to determine the degree of interaction between a propellant HFA and candidate fragments. We define a new quantity, the enhancement factor E, which also takes into account fragment-fragment interactions. This quantity is expected to correlate well with the solubility and the ability of the moieties of interest to impart stability to colloidal dispersions in HFAs. We use a methyl-based (CH) segment and its fluorinated analog (CF) to test our approach. CH is an important baseline case since it represents the tails of surfactants in FDA-approved pMDIs. CF was chosen due to the improved solubility and ability of this chemistry to stabilize aqueous dispersions in HFAs. Adhesion force from Chemical Force Microscopy (CFM) is used as an experimental analog to the binding energy calculations. The force of interaction between a chemically modified AFM tip and substrate is measured in a model HFA, which is a liquid at ambient conditions. Silanes with the same chemistry as the fragments used in the ab initio calculations allow for direct comparison between the two techniques. The CFM results provide an absolute scale for HFA-philicity. Single molecule (pair) forces calculated from the CFM experiments are shown to be in very good agreement to the E determined from the ab initio calculations. The ab initio calculations and CFM are corroborated by previous experimental studies where propellants HFAs are seen to better solvate the CF functionality.