Global distribution and budget of PCBs and HCB in background surface soils: implications for sources and environmental processes

Grain transportation and consumption reshapes the α-HCH exposure picture of China

Socio-economic activities like food trade can increase the uncertainty of human risk of persistent organic pollutants (POPs). We compared the change in model predicted α-hexachlorocyclohexane (α-HCH) cancer risk (CR) with and without grain trade in mainland China. In scenario without grain logistics, α-HCH moved fast away from southern and southeastern China via northward atmospheric transport. However, the grain logistics from northeastern China delivers the α-HCH previously accumulated in northeastern sink back to densely populated areas in recent years, which enhance CR by >50 % in the southern seaboard of China. The northward movement of grain production center and recent grain deficiency in southern provinces induced by dietary pattern changes is identified as the major driving factors of the reversed transport of α-HCH. The finding highlights the potential of socio-economic activities that can otherwise offset the risk reduction effect of the geochemical cycle of POPs.

Soil's Hidden Power: The Stable Soil Organic Carbon Pool Controls the Burden of Persistent Organic Pollutants in Background Soils

Persistent organic pollutants (POPs) tend to accumulate in cold regions by cold condensation and global distillation. Soil organic matter is the main storage compartment for POPs in terrestrial ecosystems due to deposition and repeated air-surface exchange processes. Here, physicochemical properties and environmental factors were investigated for their role in influencing POPs accumulation in soils of the Tibetan Plateau and Antarctic and Arctic regions. The results showed that the soil burden of most POPs was closely coupled to stable mineral-associated organic carbon (MAOC). Combining the proportion of MAOC and physicochemical properties can explain much of the soil distribution characteristics of the POPs. The background levels of POPs were estimated in conjunction with the global soil database. It led to the proposition that the stable soil carbon pools are key controlling factors affecting the ultimate global distribution of POPs, so that the dynamic cycling of soil carbon acts to counteract the cold-trapping effects. In the future, soil carbon pool composition should be fully considered in a multimedia environmental model of POPs, and the risk of secondary release of POPs in soils under conditions such as climate change can be further assessed with soil organic carbon models.

Occurrence differences of hexachlorobutadiene and chlorobenzenes in road dust and roadside soil media in an industrial and residential mixed area in Eastern China

The road dust and roadside soil can act as both sinks and sources of hexachlorobutadiene (HCBD) and chlorobenzenes (CBzs), but comparative research on these two adjacent media is extremely limited. In this study, HCBD and CBzs were simultaneously analyzed in road dust and roadside soil samples from an area containing both industrial factories and residential communities in Eastern China. The road dust there was found to have 2-6 times higher contents of HCBD (mean 1.14 ng/g, maximum 6.44 ng/g) and ∑Cl3-Cl6CBzs (22.8 ng/g, 90.6 ng/g) than those in the roadside soil. The spatial distributions of HCBD and CBzs in road dusts were affected by various types of sources, showing no significant discrepancy among the sites. On the contrast, HCBD and CBzs contamination in roadside soils occurring near several factories were strongly correlated to their industrial point sources. Risk assessments showed, at current contamination levels in the road dust and roadside soil, HCBD and CBzs are not likely to induce carcinogenic or non-carcinogenic risks to residents in the studied area. Nevertheless, road dust ingestion, as the major exposure pathway of HCBD and CBzs, should be avoided to reduce the exposure risk. These findings based on the contamination differences between two media provide a new perspective and evidence for screening important sources and exposure pathway of HCBD and CBzs, which would be helpful to their source identification and risk control.

Persistent organic pollutants in global surface soils: Distributions and fractionations

The distribution and fractionation of persistent organic pollutants (POPs) in different matrices refer to how these pollutants are dispersed and separated within various environmental compartments. This is a significant study area as it helps us understand the transport efficiencies and long-range transport potentials of POPs to enter remote areas, particularly polar regions. This study provides a comprehensive review of the progress in understanding the distribution and fractionation of POPs. We focus on the contributions of four intermedia processes (dry and wet depositions for gaseous and particulate POPs) and determine their transfer between air and soil. These processes are controlled by their partitioning between gaseous and particulate phases in the atmosphere. The distribution patterns and fractionations can be categorized into primary and secondary types. Equations are developed to quantificationally study the primary and secondary distributions and fractionations of POPs. The analysis results suggest that the transfer of low molecular weight (LMW) POPs from air to soil is mainly through gas diffusion and particle deposition, whereas high molecular weight (HMW) POPs are mainly via particle deposition. HMW-POPs tend to be trapped near the source, whereas LMW-POPs are more prone to undergo long-range atmospheric transport. This crucial distinction elucidates the primary reason behind their temperature-independent primary fractionation. However, the secondary distribution and fractionation can only be observed along a temperature gradient, such as latitudinal or altitudinal transects. An animation is produced by a one-dimensional transport model to simulate conceptively the transport of CB-28 and CB-180, revealing the similarities and differences between the primary and secondary distributions and fractionations. We suggest that the decreasing temperature trend along latitudes is not the major reason for POPs to be fractionated into the polar ecosystems, but drives the longer-term accumulation of POPs in cold climates or polar cold trapping.

Spatial distribution, isomer signature and air-soil exchange of legacy and emerging poly- and perfluoroalkyl substances

Widespread occurrences of various poly- and perfluoroalkyl substances (PFAS) in terrestrial environment calls for the growing interest in their transport behaviors. However, limited studies detected PFAS with structural diversity in tree barks, which reflect the long-term contamination in atmosphere and play a vital role in air-soil exchange behaviors. In this study, 26 PFAS congeners and typical branched isomers were investigated in surface soils and tree barks at 28 sites along the Taihu Lake, Taipu River, and Huangpu River. Concentrations of total PFAS in soils and tree barks were 0.991-29.4 and 7.99-188 ng/g dw, with PFPeA and PFDoA were the largest contributors in the two matrices. The highest PFAS levels were found in the Taihu Lake watershed, where textile manufacturing and metal plating activities highly prosper. With regard to the congener and isomer signatures, short-chain homologs dominated in soils (65.5%), whereas long-chain PFAS showed a major proportion in barks (41.9%). The composition of linear isomers of PFOS, PFOA and PFHxS implied that precursor degradation might be an important source of PFAS in addition to the 3M electrochemical fluorination (ECF). Additionally, the distance from the emission source, total organic carbon (TOC), logKOA and logKOW were considered potential influencing factors in PFAS distributions. Based on the multi-media fugacity model, about 71% of the fugacity fraction (ffs) values of the PFAS were below 0.3, indicating the dominant deposition from the atmosphere to the soil. The average fluxes of air-soil exchange for PFAS were -0.700 ± 11.0 ng/(m2·h). Notably, the estimated daily exposure to PFAS ranged from 9.57 × 10-2 to 8.59 × 10-1 ng/kg·bw/day for children and 3.31 × 10-2 to 3.09 × 10-1 ng/kg·bw/day for adults, suggesting low risks from outdoor inhalation and dermal uptake. Overall, results from distribution with structural diversity, air-soil exchange and preliminary risk assessment. This study provided in-depth insight of PFAS in multi-medium environment and bridged gaps between field data and policy-making for pollution control.

Soil contamination and carrying capacity across the Tibetan plateau using structural equation models

Soil contamination is a major environmental issue worldwide. Compared with Arctic, European Alps and Rocky Mountains, the soil contamination and soil environment carrying capacity (SECC) of the Tibetan Plateau (TP) is not systematic and multidimensional. In this study, the levels, influencing factors including climate factors [(i.e., mean annual precipitation (MAP) and mean annual temperature (MAT)], socio-economic factors [(i.e., population, population density and gross domestic product (GDP)], vegetation coverage factor, soil factors [(i.e., pH, soil organic carbon (SOC), total phosphorus and total nitrogen] and topographic factors [(i.e., longitude, latitude and digital elevation model (DEM)] and carrying capacity of multiple soil contaminants [persistent organic pollutants (POPs), heavy metals (HMs) and microplastics (MPs)] was systematically studied. Results show that the spatial distribution of POPs in the eastern was higher than that in the western region, and the structural equation model (SEM) demonstrate that SOC and MAT were the key factors influencing distribution. Regarding HMs, except As, moderate and heavy pollution of the remaining elements were found in the northern and eastern TP regions, and pH and MAP were the main influencing factors. The MPs showed that the distribution of the patches was influenced by GDP and MAP. Furthermore, a higher SECC in the eastern region that gradually decreased from east to west. pH is the primary factors affecting SECC, followed by normalized difference vegetation index (NDVI). An increase of pH and NDVI by one unit is likely to make SECC scores decrease by 0.8 and increase by 0.32, respectively. Taken together, these studies provide a system, cost-effective, and quantitative framework for soil contamination and carrying capacity in the TP.

Assessment of exposure of benthic organisms to selected organochlorine pollutants in the west Spitsbergen fjords

Climate-related changes in environmental conditions, such as reduction of sea ice, intensive glacier retreat, and increasing summer precipitation, directly influence the arctic marine environment and, therefore, the organisms living there. Benthic organisms, being an important food source for organisms from higher trophic levels, constitute an important part of the Arctic trophic network. Moreover, the long lifespan and limited mobility of some benthic species make them suitable for the study of the spatial and temporal variability of contaminants. In this study, organochlorine pollutants (polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB)) were measured in benthic organisms collected in three fjords of western Spitsbergen. Two of these were recommended by the Marine Biodiversity and Ecosystem Functioning (MARBEF) Network of Excellence as European flagship sites, namely Hornsund as the Biodiversity Inventory and Kongsfjorden as the Long-Term Biodiversity Observatory. Adventfjorden, with notable human activity, was also studied. Ʃ7 PCB and HCB concentrations in sediments were up to 2.4 and 0.18 ng/g d.w. respectively. Concentrations of Ʃ7 PCBs and HCB measured in collected benthic organisms were up to 9.1 and 13 ng/g w.w., respectively. In several samples (41 of 169) the concentrations of ∑7 PCBs were below the detection limit values, yet nevertheless the results of the research show effective accumulation of target organochlorine contaminants by many Arctic benthic organisms. Important interspecies differences were observed. Free-living, mobile taxa, such as shrimp Eualus gaimardii, have accumulated a large quantity of contaminants, most probably due to their predatory lifestyle. ∑7 PCB and HCB concentrations were both significantly higher in Hornsund than in Kongsfjorden. Biomagnification occurred in 0 to 100 % of the predator-prey pairs, depending on the congener analyzed. Although the sampled organisms were proved to have accumulated organochlorine contaminants, the measured levels can be considered low, and not posing a substantial threat to the biota.

New and legacy pesticidal persistent organic pollutants in the agricultural region of the Sultanate of Oman

Comprehensive air and surface soil monitoring was conducted for new and legacy organochlorine pesticides (OCPs) to fill the knowledge and data gap on the sources and fate of pesticidal persistent organic pollutants (POPs) in the Sultanate of Oman. DDTs in agricultural soil samples ranged from 0.013 to 95.80 ng/g (mean: 8.4 ± 25.06 ng/g), with a median value of 0.07 ng/g. The highest concentration was observed at Shinas, where intensive agricultural practice is prevalent. The dominance of p,p'-DDT in soil and air reflected technical DDT formulation usage in Oman. Among newly enlisted POPs, pentachlorobenzene had the maximum detection frequency in air (47%) and soil (41%). Over 90% of sites reflected extensive past use of hexachlorobenzene. Major OCP isomers and metabolites showed net volatilisation from the agricultural soil, thereby indicating concurrent emission and re-emission processes from the soil of Oman. However, the cleansing effect of oceanic air mass is the possible reason for relatively lower atmospheric OCP levels from a previous study. Although DDT displayed maximum cancer risk, the level is below the permissible limit. DDT primarily stemmed from obsolete stock and inadequate management practices. Hence, we suggest there is a need for DDT regulation in Oman.

Driving factors influencing spatiotemporal variation of natural organic chlorine in Shennongjia forest soil

Studying the geochemical behavior of chlorine is the basis of understanding the chlorine cycle in nature. To explore the spatiotemporal distribution of natural organic chlorine (Clorg), L layer (litter fall), F-H layer (humification zone), topsoil layer (0-20 cm), and deep soil layer (20-40 cm) samples were collected from 18 sampling sites at different altitudes (851-2918 m) in Shennongjia Forest in May, August, and December. Clorg content was analyzed, and the Clorg stocks were calculated. The major factors affecting the distribution of Clorg were explored. The results revealed that the sum of Clorg content in four layers varied from 7.958 to 184.686 mg/kg, and the highest value was observed in August. Clorg accounted for 46%-77% of total chlorine, with the highest mean ratio in soil layer (0-20 cm). Clorg content exhibited the following trend: F-H layer > L layer > topsoil layer (0-20 cm) > deep soil layer (20-40 cm). The seasonal patterns of Clorg in soil layers were different from that in L and F-H layers, which were mainly controlled by the content and humification degree of organic matter. Clorg storage was much higher in soil layers (61-246 kg/ha) than those in F-H layer (1.1-7.1 kg/ha) and in L layer (0.1-0.8 kg/ha) because of the large thickness of the soil layers. Overall, the Clorg content exhibited an increasing trend with altitude, except at an altitude of approximately 1800 m. Clorg content in L and F-H layers varied more obviously with altitude than that in soil layers. When inorganic chlorine (Clin) was not a limiting factor for the chlorination process, Clorg content in L and F-H layers was significantly affected by climate and organic matter controlled by altitude, while Clorg content in soil layers was also mediated by metal ions and pH, and soil particle size. This study could provide a scientific basis for assessing the chlorine cycle in nature.

Application of the multimedia fugacity model in predicting the environmental behaviors of PCBs: Based on field measurements and level III fugacity model simulation

The comprehensive understanding of PCBs' fate has been impeded by the lack of simultaneous monitoring of PCBs in multiple environmental media in the background areas, which were considered long-term sinks for highly chlorinated PCBs. To address this gap, this study analyzed soils, willow tree barks, water, suspended particulate matter (SPM), and sediment samples collected from the middle reach of the Huaihe River in China for 27 PCBs. The results showed that the levels of ∑27PCBs in the soils were comparable to or lower than the background values worldwide. There were no significant correlations between organic matter and ∑27PCB concentrations in the soils and sediments. Additionally, the contamination of dioxin-like PCBs in the aquatic environment of the study area deserves more attention than in the soils. Applying the level III fugacity model to PCB 52, 77, 101, and 114 revealed that the soil was the primary reservoir, and air-soil exchange was the dominant intermedia transfer process, followed by air-water exchange. Furthermore, simulated results of air-soil and air-water diffusion were compared with those calculated from the field concentrations to predict the potential environmental behaviors of PCBs. Results indicated that the studied river would be a "secondary source" for PCB 52, 77, and 101. However, PCB 52, 77, 101, and 114 would continue to transfer from the air to the soil. This study combines multimedia field measurements and the fugacity model, providing a novel approach to predicting the potential environmental behaviors of PCBs.

Occurrences and spatial distributions of dioxin-like polychlorinated biphenyls in chlorobenzene and chloroethylene manufacturing processes in China

As a group of pollutants listed in the Stockholm Convention, polychlorinated biphenyls (PCB) should be eliminated and their releases should be controlled. For this purpose, a complete PCB emission inventory is urgently required. Current unintentional releases of PCB were dominantly focused on waste incineration and non-ferrous metal production industries. The formation of PCB in chlorinated chemical manufacturing processes is poorly understood. In this study, occurrences and inventory of dioxin-like PCB (dl-PCB) in three typical chemical manufacturing processes, including chlorobenzene and chloroethylene production processes, were investigated. The bottom residues, which were high boiling point by-products after rectification tower, contained higher concentration of PCB than other stage samples in monochlorobenzene production and trichloroethylene production processes. The PCB concentrations were as high as 1.58 ng/mL and 152.87 ng/mL, respectively, which should be further concerned. The toxic equivalent quantities (TEQ) of dl-PCB in monochlorobenzene, trichloroethylene, and tetrachloroethylene products were 0.25 μg TEQ/t, 1.14 μg TEQ/t, and 5.23 μg TEQ/t, respectively. The mass concentration and TEQ of dl-PCB determined in this research can be used for the further development of dl-PCB emission inventory from these chemical manufacturing industries. In addition, temporal and spatial trends of PCB releases from typical chemical manufacturing processes from 1952 to 2018 in China were clarified. The releases increased rapidly in the latest two decades and presented an expansion tendency from the southeast coastal areas to northern and central areas. The continuing upward trend for the output and the high dl-PCB TEQ of chloroethylene indicated significant releases of PCB from chemical manufacturing processes and should receive more attention.

Characterization of ambient polychlorinated biphenyl background conditions in surface waters of the Pajarito Plateau, New Mexico

This study presents the development of polychlorinated biphenyl (PCB) background threshold values (BTVs) that statistically characterize ambient background conditions for surface waters in undeveloped and developed landscapes of the Pajarito Plateau in the Rio Grande Basin of New Mexico. Between 2009 and 2018, surface water data were collected at 45 locations under a variety of flow conditions and regimes. A total of 163 samples were collected, with roughly 1/3 of samples and locations being in undeveloped areas (n = 53 from 17 locations), and the remainder being in developed areas (n = 110 from 28 locations). While there are areas on the Pajarito Plateau where PCB point sources are known or likely to have contributed to PCBs in soils, PCB BTVs calculated for undeveloped portions of watersheds (upstream of areas where PCB point sources are known or likely to have contributed to PCBs in soils, and therefore not affected by PCB sources within the watershed) are well above New Mexico's human health organism-only (HH-OO) water quality criterion (0.64 ng/L). Background threshold values are even higher in developed areas upstream of managed soil sites, suggesting that in developed areas, both diffuse ambient PCB sources (e.g., atmospheric deposition) and localized urban sources (e.g., building materials, paints, and electrical equipment) contribute to PCBs in those watersheds. These findings indicate that New Mexico's current HH-OO water quality criterion for PCBs cannot practicably be met due to ambient conditions. It is also impracticable to meet the US Environmental Protection Agency (EPA) criterion continuous concentration (CCC) of 14 ng/L in developed background areas, where the BTV is approximately 1.5 times the CCC. Integr Environ Assess Manag 2023;19:1307-1319. © 2022 SETAC.

The effect of military conflict zone in the Middle East on atmospheric persistent organic pollutant contamination in its north

This study aimed to investigate long-range atmospheric transport of selected POPs released due to the effects of military conflicts in regions to the south of Turkey's borders. Ten locations were selected to deploy passive air samplers at varying distances to the border on a southeast-west transect of the country, proximity-grouped as close, middle, and far. Sampling campaign included winter and transition months when desert dust transport events occur. Hypothesis of the study was that a decreasing trend would be observed with increasing distance to the border. Group comparisons based on statistical testing showed that PBDE-183, Σ₄₅PCB, and dieldrin in winter; PBDE-28, PBDE-99, PBDE-154, p,p'-DDE, Σ₁₄PBDE, and Σ₂₅OCP in the transition period; and PBDE-28, PBDE-85, PBDE-99, PBDE-154, PBDE-190, PCB-52, Σ₄₅PCB, p,p'-DDE, and Σ₂₅OCP over the whole campaign had a decreasing trend on the transect. An analysis of concentration ratio to the background showed that long-range atmospheric transport impacted the study sites, especially those of close group in comparison to the local sources. Back-trajectory analyses indicated that there was transport from the conflict areas to sites in the close-proximity group, while farther sampling locations mostly received air masses from Europe, Russia, and former Soviet Union countries, followed by North Africa, rather than the military conflict areas. In consequence, decrease in concentrations with distance and its relation to molecular weight through proportions, diagnostic ratios, analysis of concentration ratio to the background, and back-trajectory analyses support the effect of transport from the military-conflict area to its north.

Passive-Sampler-Derived PCB and OCP Concentrations in the Waters of the World─First Results from the AQUA-GAPS/MONET Network

Persistent organic pollutants (POPs) are recognized as pollutants of global concern, but so far, information on the trends of legacy POPs in the waters of the world has been missing due to logistical, analytical, and financial reasons. Passive samplers have emerged as an attractive alternative to active water sampling methods as they accumulate POPs, represent time-weighted average concentrations, and can easily be shipped and deployed. As part of the AQUA-GAPS/MONET, passive samplers were deployed at 40 globally distributed sites between 2016 and 2020, for a total of 21 freshwater and 40 marine deployments. Results from silicone passive samplers showed α-hexachlorocyclohexane (HCH) and γ-HCH displaying the greatest concentrations in the northern latitudes/Arctic Ocean, in stark contrast to the more persistent penta (PeCB)- and hexachlorobenzene (HCB), which approached equilibrium across sampling sites. Geospatial patterns of polychlorinated biphenyl (PCB) aqueous concentrations closely matched original estimates of production and use, implying limited global transport. Positive correlations between log-transformed concentrations of Σ₇PCB, ΣDDTs, Σendosulfan, and Σchlordane, but not ΣHCH, and the log of population density (p < 0.05) within 5 and 10 km of the sampling sites also supported limited transport from used sites. These results help to understand the extent of global distribution, and eventually time-trends, of organic pollutants in aquatic systems, such as across freshwaters and oceans. Future deployments will aim to establish time-trends at selected sites while adding to the geographical coverage.

Degradation behaviors and accumulative effects of coexisting chlorobenzene congeners on the dechlorination of hexachlorobenzene in soil by nanoscale zero-valent iron

It is well known that many chlorinated organic pollutants can be dechlorinated by nanoscale zero-valent iron. However, in the real chlorinated organic compounds contaminated soil, the congeners of high- and low-chlorinated isomer often coexist and their dechlorination behaviors are poorly known, such as hexachlorobenzene (HCB). In this work, the degradation behaviors of three coexisting chlorobenzene congeners pentachlorobenzene (PeCB), 1,2,4,5-tetrachlorobenzene (1,2,4,5-TeCB) and 1,2,4-trichlorobenzene (1,2,4-TCB) and the influence of initial pH and reaction temperature on the dechlorination of HCB in HCB-contaminated soil by nanoscale zero-valent iron were studied. The amount and extent of accumulated coexisting chlorobenzenes was analyzed under different environmental conditions. The results indicate that nanoscale zero-valent iron can improve the degradation efficiency of highly toxic chlorinated benzenes and reduce the accumulative effects of highly toxic chlorinated benzenes on dechlorination of HCB. The accumulative effects of three coexisting chlorobenzene congeners on the dechlorination of HCB were ranked as follows: 1,2,4-TCB > 1,2,4,5-TeCB > PeCB.

Adsorption of the hydrophobic organic pollutant hexachlorobenzene to phyllosilicate minerals

Hexachlorobenzene (HCB), a representative of hydrophobic organic chemicals (HOC), belongs to the group of persistent organic pollutants (POPs) that can have harmful effects on humans and other biota. Sorption processes in soils and sediments largely determine the fate of HCB and the risks arising from the compound in the environment. In this context, especially HOC-organic matter interactions are intensively studied, whereas knowledge of HOC adsorption to mineral phases (e.g., clay minerals) is comparatively limited. In this work, we performed batch adsorption experiments of HCB on a set of twelve phyllosilicate mineral sorbents that comprised several smectites, kaolinite, hectorite, chlorite, vermiculite, and illite. The effect of charge and size of exchangeable cations on HCB adsorption was studied using the source clay montmorillonite STx-1b after treatment with nine types of alkali (M+: Li, K, Na, Rb, Cs) and alkaline earth metal cations (M2+: Mg, Ca, Sr, Ba). Molecular modeling simulations based on density functional theory (DFT) calculations to reveal the effect of different cations on the adsorption energy in a selected HCB-clay mineral system accompanied this study. Results for HCB adsorption to minerals showed a large variation of solid-liquid adsorption constants Kd over four orders of magnitude (log Kd 0.9-3.3). Experiments with cation-modified montmorillonite resulted in increasing HCB adsorption with decreasing hydrated radii of exchangeable cations (log Kd 1.3-3.8 for M+ and 1.3-1.4 for M2+). DFT calculations predicted (gas phase) adsorption energies (- 76 to - 24 kJ mol-1 for M+ and - 96 to - 71 kJ mol-1 for M2+) showing a good correlation with Kd values for M2+-modified montmorillonite, whereas a discrepancy was observed for M+-modified montmorillonite. Supported by further calculations, this indicated that the solvent effect plays a relevant role in the adsorption process. Our results provide insight into the influence of minerals on HOC adsorption using HCB as an example and support the relevance of minerals for the environmental fate of HOCs such as for long-term source/sink phenomena in soils and sediments.

Myco- and phyco-remediation of polychlorinated biphenyls in the environment: a review

Polychlorinated biphenyls (PCBs) are toxic organic compounds and pose serious threats to environment and public health. PCBs still exist in different environments such as air, water, soil, and sediments even on ban. This review summarizes the phyco- and myco-remediation technologies developed to detoxify the PCB-polluted sites. It was found that algae mostly use bioaccumulation to biodegradation strategies to reclaim the environment. As bio-accumulator, Ulva rigida C. Agardh has been best at 25 ng/g dry wt to remove PCBs. Evidently, Anabaena PD-1 is the only known PCB degrading alga and efficiently degrade Aroclor 1254 and dioxin-like PCBs up to 84.4% and 37.4% to 68.4%, respectively. The review suggested that factors such as choice of algal strains, response of microalgae, biomass, the rate of growth, and cost-effective cultivation conditions significantly influence the remediation of PCBs. Furthermore, the Anabaena sp. linA gene of Pseudomonas paucimobilis Holmes UT26 showed enhanced efficiency. Pleurotus ostreatus (Jacq.) P. Kumm is the most efficient PCB degrading fungus, degrading up to 98.4% and 99.6% of PCB in complex and mineral media, respectively. Combine metabolic activities of bacteria and yeast led to the higher detoxification of PCBs. Fungi-algae consortia would be a promising approach in remediation of PCBs. A critical analysis on potentials and limits of PCB treatment through fungal and algal biosystems have been reviewed, and thus, new insights have emerged for possible bioremediation, bioaccumulation, and biodegradation of PCBs.

Status, distribution, source, and risk of polychlorinated biphenyl levels in soils of five cities from the Hexi Corridor, Northwest China

Few studies have been performed on the persistent organic pollutant contamination in soil from the plateau and remote areas, particularly the mid-latitude arid and semi-arid regions of Northwest China. The occurrence, spatial distribution, source, and potential risk of 12 polychlorinated biphenyls (PCBs) were investigated in soil collected from five Hexi Corridor cities in Northwest China. All of the PCBs were detected individually in the soil samples. The concentration of Σ₁₂PCBs in the Hexi Corridor ranged from 2.0 to 148.5 ng/g, with an average of 21.3 ng/g. The tetra-CBs and hexa-CBs were the dominant PCB components in the soil. Higher PCB levels were found in the industrial city of Jiuquan, and the fewest PCBs were detected at Jinchang. Source analysis by principal component analysis showed that the dominant sources of PCBs were automobile exhaust, paint additives, insulation materials, and other industrial products. The carcinogenic health risk of PCBs in the Hexi Corridor soil was within acceptable levels, but the exposure risk of PCBs in soil for children was higher than that for adults.

Dry dechlorination of polychlorinated biphenyls in contaminated soil by using nano-sized composite of metallic Ca/CaO and its mechanism

Soil contamination by PCBs is still known as a serious problem across the world, and the development of new technologies or the improvement of existing ones (e.g. higher efficiency, shorter processing time, lower input energy) are more and more important. Moreover, understanding the chemistry of the entire process, from a mechanistic point of view, can accelerate the process of improvement. In these circumstances, we attempted a clarification of the highly efficient degradation of PCBs by nano-sized particle of metallic Ca in CaO ("nCa") at 250 °C in dry solid state conditions. The reaction involved the hydrodechlorination, simple reduction, reductive coupling and hydroxylation processes. The detoxification efficiency reached over 99%. A tentative pathway and mechanism is proposed for explaining the final reactions products. Finally, the process was applied to real PCBs-contaminated soil, containing various amounts of PCBs, with a total success in completely eliminating the toxic polychlorinated compounds.

Occurrence and spatial distribution of individual polychlorinated biphenyl congeners in residential soils from East Chicago, southwest Lake Michigan

We report individual polychlorinated biphenyl congeners and the sum of all congeners (ΣPCB) in residential soils of East Chicago, Indiana. ΣPCB in soils ranged from 20 to 1700 ng/g dry weight (DW), with a geometric mean of 120 ng/g DW. These values are significantly higher than other locations, but similar or lower to locations nearby well-known PCB contamination sites. No PCB spatial distribution pattern was observed. PCB concentrations increase with total organic carbon in the soils and proximity to Indiana Harbor and Ship Canal (IHSC), where sediments are contaminated with PCBs. Most samples are similar in their PCB distribution and Aroclor 1254 yielded the highest similarity to all the samples. A fifth of the samples highly resemble other PCB profiles such as EPA background and Cedar Rapids Iowa soils, and volatilization from Lake Michigan, whereas volatilization from IHSC could not explain the PCBs found in soils. IHSC was expected to be the main source of PCBs in the nearby soils. It is possible that soils are impacted by variety of known and unknown sources, including volatilization from Lake Michigan, resulting in a regional PCB signal. Although PCB concentrations are higher than other locations, samples were below the current US EPA non-cancer residential soil level remediation goal for dioxin TEQ.

Associations of polychlorinated biphenyls exposure with plasma glucose and diabetes in general Chinese population: The mediating effect of lipid peroxidation

Polychlorinated biphenyls (PCBs) exposure has been related to the abnormal glucose metabolism and the risk of diabetes. However, the joint effects of various PCBs are uncertain and the potential mechanisms remain unclear. Our objectives were to evaluate the associations of serum PCBs with fasting plasma glucose (FPG) and the risk of diabetes among a general Chinese population, and to estimate the mediating effects of oxidative stress in the above associations. Serum levels of seven indicator-PCBs (PCB-28, 52, 101, 118, 138, 153, and 180) and FPG values were determined among 4498 subjects from the Wuhan-Zhuhai cohort. Oxidative DNA damage biomarker (urinary 8-hydroxy-2'-deoxyguanosine, 8-OHdG) and lipid peroxidation biomarker (urinary 8-isoprostane, 8-iso-PGF_2α) were also measured. Positive relationships of serum PCBs with FPG values as well as the risk of diabetes were observed. With each 1% increment in the natural log-transformed values of wet weight serum PCBs, FPG levels increased a 0.125% for PCB-52, 0.168% for PCB-118, 0.221% for PCB-138, 0.273% for PCB-153, and 0.379% for ΣPCB (the sum of seven PCBs). The adjusted odds ratios of diabetes associated with wet weight PCBs were 1.186 for PCB-52, 1.373 for PCB-118, 1.635 for PCB-153, and 1.456 for ΣPCB. The seven serum PCBs showed positive overall effect on the risk of diabetes. Elevated PCB-28, PCB-52, PCB-118, PCB-138, PCB-153, and ΣPCB were associated with the increased urinary 8-iso-PGF_2α, which was positively related with FPG values. Furthermore, urinary 8-iso-PGF_2α partially mediated the positive associations between PCBs and FPG values, with the mediated proportions ranged from 3.20 to 12.93%. In conclusion, our results suggested that serum PCBs were positively related with increased oxidative stress, FPG values, and the risk of diabetes among a general Chinese population. Serum PCBs mixture had positive overall effect on the risk of diabetes. Lipid peroxidation partly mediated the FPG elevation induced by PCB exposure.

Contributions of partition and adsorption to polycyclic aromatic hydrocarbons sorption by fractionated soil at different particle sizes

Partition and adsorption of polycyclic aromatic hydrocarbons (PAHs) are critical mechanisms determining their fate at the solid-liquid interface. The complexity of soil composition makes it difficult to distinguish between partition and adsorption, and bates the accuracy of the research results. This study found that the composition and structure of the soil particles (SAs) of varying particle sizes were significantly different. Partition contributed significantly to phenanthrene (Phe) sorption in SAs over 0.002 mm. However, PAHs had the highest sorption coefficient (K_d) in SA less than 0.002 mm (SA-3), and the lower aqueous phase equilibrium concentration of Phe, the greater the adsorption effect. According to morphology and structural analysis, Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), interactions of micropores, soil organic matter (SOM) and minerals enhanced the sorption of PAHs. Additionally, thermogravimetry and mass spectrometry (TG-MS) results proved that SOM could inhibit the release of PAHs adsorbed in SAs during heating process. We observed that the Log Koc of PAHs was the most important factor in determining the K_d in SAs applying principal component analyses (PCA), and they have significant linear relationships (R² = 0.79-0.93). These findings provide new understandings on interface reactivity of PAHs sorption to soils and the development of interface model.

Organochlorine POPs sequestration strategy by carbonaceous amendments of contaminated soils: Toward a better understanding of the transfer reduction to laying hens

PCBs, PCDD/Fs, and Chlordecone (CLD) are POPs found in soils and transferred to animals through involuntary soil ingestion. In this frame, the amendment of contaminated soil with porous matrices, like Biochars (BCs) and Activated Carbons (ACs), is a promising technique for reducing this transfer. In this study, the efficiency of 3 biochars and 3 activated carbons was assessed by amending 2% (by weight) of these matrices on (i) CLD or (ii) PCBs and PCDD/Fs contaminated artificial soils. Porosity of the carbon-based materials and molecules physico-chemical characteristics were then linked to the obtained results. The concentrations of pollutants were then measured in the egg yolks of laying hens (n = 3), which were fed on a daily basis pellets containing 10% of soil for 20 days. Overall, no significant transfer reduction was observed with the biochar and the granular AC amendments for all the compounds. However, significant reductions were obtained with the two efficient activated carbons for PCDD/Fs and DL-PCB up to 79-82% (TEQ basis), whereas only a slight reduction of concentrations was obtained with these activated carbons for CLD and NDL-PCBs. Thus, (i) biochars were not proven efficient to reduce halogenated pollutants transfer to animals, (ii) powdered AC amendments resulted in reducing the bioavailability of soil POPs, and (iii) the effectiveness of such strategy depended on both characteristics of the matrix and of the pollutants.

Pesticide-Residue Analysis in Soils by the QuEChERS Method: A Review

Pesticides are among the most important contaminants worldwide due to their wide use, persistence, and toxicity. Their presence in soils is not only important from an environmental point of view, but also for food safety issues, since such residues can migrate from soils to food. However, soils are extremely complex matrices, which present a challenge to any analytical chemist, since the extraction of a wide range of compounds with diverse physicochemical properties, such as pesticides, at trace levels is not an easy task. In this context, the QuEChERS method (standing for quick, easy, cheap, effective, rugged, and safe) has become one of the most green and sustainable alternatives in this field due to its inherent advantages, such as fast sample preparation, the minimal use of hazardous reagents and solvents, simplicity, and low cost. This review is aimed at providing a critical revision of the most relevant modifications of the QuEChERS method (including the extraction and clean-up steps of the method) for pesticide-residue analysis in soils.

Dietary intakes of dioxins and polychlorobiphenyls (PCBs) and breast cancer risk in 9 European countries

BACKGROUND

Dioxins and polychlorobiphenyls (PCBs) are persistent organic pollutants that have demonstrated endocrine disrupting properties. Several of these chemicals are carcinogenic and positive associations have been suggested with breast cancer risk. In general population, diet represents the main source of exposure.

METHODS

Associations between dietary intake of 17 dioxins and 35 PCBs and breast cancer were evaluated in the European Prospective Investigation into Cancer and Nutrition (EPIC) cohort from nine European countries using multivariable Cox regressions. The present study included 318,607 women (mean ± SD age: 50.7 ± 9.7) with 13,241 incident invasive breast cancers and a median follow-up of 14.9 years (IQR = 13.5-16.4). Dietary intake of dioxins and PCBs was assessed combining EPIC food consumption data with food contamination data provided by the European Food Safety Authority.

RESULTS

Exposure to dioxins, dioxins + Dioxin-Like-PCBs, Dioxin-Like-PCBs (DL-PCBs), and Non-Dioxin-Like-PCBs (NDL-PCBs) estimated from reported dietary intakes were not associated with breast cancer incidence, with the following hazard ratios (HRs) and 95% confidence intervals for an increment of 1 SD: HRdioxins = 1.00 (0.98 to 1.02), HRdioxins+DL-PCB = 1.01 (0.98 to 1.03), HRDL-PCB = 1.01 (0.98 to 1.03), and HRNDL-PCB = 1.01 (0.99 to 1.03). Results remained unchanged when analyzing intakes as quintile groups, as well as when analyses were run separately per country, or separating breast cancer cases based on estrogen receptor status or after further adjustments on main contributing food groups to PCBs and dioxins intake and nutritional factors.

CONCLUSIONS

This large European prospective study does not support the hypothesis of an association between dietary intake of dioxins and PCBs and breast cancer risk.

Background levels of OCPs, PCBs, and PAHs in soils from the eastern Pamirs, China, an alpine region influenced by westerly atmospheric transport

Long-range atmospheric transport (LRAT) plays a crucial role in the occurrence of persistent organic pollutants (POPs) in remote regions. When studying the LRAT of POPs on the Tibetan Plateau, westerly-controlled regions have received insufficient attention compared with regions influenced by the Indian monsoon or air flow from East Asia. We investigated the residual levels of POPs in soils from the eastern Pamirs and used air backward trajectory analysis to elucidate the influence of potential source regions via LRAT. Organochlorine pesticides (OCPs, mainly comprising DDTs, HCHs, and HCB), polychlorinated biphenyls (PCBs, mainly comprising penta- and hexa-CBs), and polycyclic aromatic hydrocarbons (PAHs, mainly comprising three- and four-ring) were detected at low concentrations of 40-1000, <MDL-88, and 2100-34,000 pg/g, respectively. We elucidated three major geographical distribution patterns of POPs, which were influenced by (1) the distribution of total organic carbon and black carbon in soil, (2) historical use of pesticides in the Tarim Basin, and (3) continuous emissions. Central Asia and the Tarim Basin were major potential source regions of POPs reaching the eastern Pamirs via LRAT. Historical use of technical HCH or lindane and technical DDT in potential source regions may contribute to the accumulation of HCHs and DDTs in the eastern Pamirs, respectively. Local sources seem to play a more important role in the occurrence of PAHs in the study area. By being under the control of less contaminated westerly air flow, the eastern Pamirs are more pristine than the core of the Tibetan Plateau where the Indian and East Asia monsoons deliver contaminants from highly industrialized areas in East China and India.

Identifying emerging environmental concerns from long-chain chlorinated paraffins towards German ecosystems

Germany is one of several major European producers of chlorinated paraffins (CPs). This study showed that not only the legacy short-chain products (SCCPs, C_10-13), but also the current-use medium- and long-chain products (MCCPs, C_14-17; LCCPs, C_>17) as well as the very-short-chain impurities (vSCCPs, C_<10) are ubiquitous in the 72 samples collected from the coastal, terrestrial, and freshwater ecosystems across the country. The concentrations of LCCPs surpassed those of the other CPs in 40% of the biota samples. Archived bream samples collected downstream of a CP-manufacturing factory showed decreasing temporal trends of (v)SCCPs and relatively constant levels of MCCPs from 1995 to 2019; however, the overall levels of LCCPs have increased by 290%, reflecting the impact of chemical regulation policies on changes in CP production. A visualization algorithm was developed for integrating CP results from various matrices to illustrate spatial tendencies of CP pollution. Higher levels of (v)SCCPs were indicated in the former West Germany region, while MCCP and LCCP concentrations did not seem to differ between former East and West Germany, suggesting relatively equal production and use of these chemicals after the German Reunification. The results provide an early warning signal of environmental concerns from LCCPs on the eve of their booming global production and use.

Three-dimensional spatial distribution of legacy and novel poly/perfluoroalkyl substances in the Tibetan Plateau soil: Implications for transport and sources

Driven by increasingly stringent regulations on the legacy poly/perfluoroalkyl (PFASs), a variety of fluorinated alternatives have emerged on the market. Tibetan Plateau (TP) plays an important role in accumulation of organic pollutants due to its high altitude and wet deposition. In this study, the occurrence, spatial distribution and sources of PFASs in the TP soils were investigated. The total concentrations of PFASs ranged from 0.814-4.51 ng/g in the TP soils, with the identification of a variety of novel PFASs, including fluorotelomer sulfonates (FTSs), chlorinated polyfluorinated ether sulfonic acid (Cl-PFESAs), and hexafluoropropylene oxide (HFPO) homologues. Generally, the PFAS concentrations exhibited an increase trend from the west to east, and gradually increased with the altitude increasing, suggesting the impacts of human activities and mountain cold-trapping. The PFASs decreased with the increase of soil depth, but at different extents, which were related to their occurrence time, interactions with organic matters, and microbial transformation in soil. Most of the PFASs were present as free fractions in soil, particularly for the short-chain perfluoroalkyl acids (PFAAs), implying that they were liable to be accumulated in organisms and transport to groundwater. Multiple source apportionment analyses indicated that PFASs in the soil of TP were not only derived from the local pollution, but also from the atmospheric migration influenced by Indian Monsoon and westerly winds.

Recent advances in PCB removal from historically contaminated environmental matrices

Despite being drastically restricted in the 1970s, polychlorinated biphenyls (PCBs) still belong among the most hazardous contaminants. The chemical stability and dielectric properties of PCBs made them suitable for a number of applications, which then lead to their ubiquitous presence in the environment. PCBs are highly bioaccumulative and persistent, and their teratogenic, carcinogenic, and endocrine-disrupting features have been widely reported in the literature. This review discusses recent advances in different techniques and approaches to remediate historically contaminated matrices, which are one of the most problematic in regard to decontamination feasibility and efficiency. The current knowledge published in the literature shows that PCBs are not sufficiently removed from the environment by natural processes, and thus, the suitability of some approaches (e.g., natural attenuation) is limited. Physicochemical processes are still the most effective; however, their extensive use is constrained by their high cost and often their destructiveness toward the matrices. Despite their limited reliability, biological methods and their application in combinations with other techniques could be promising. The literature reviewed in this paper documents that a combination of techniques differing in their principles should be a future research direction. Other aspects discussed in this work include the incompleteness of some studies. More attention should be given to the evaluation of toxicity during these processes, particularly in terms of monitoring different modes of toxic action. In addition, decomposition mechanisms and products need to be sufficiently clarified before combined, tailor-made approaches can be employed.

Electrostimulated bio-dechlorination of a PCB mixture (Aroclor 1260) in a marine-originated dechlorinating culture

Aroclor 1260, a commercial polychlorinated biphenyl (PCB) mixture, is highly recalcitrant to biotransformation. A negatively polarized cathode (-0.35 V vs. standard hydrogen electrode) was applied for the first time to a marine-origin PCB dechlorinating culture that substantially increased the microbial dechlorination rate of Aroclor 1260 (from 8.6 to 11.6 μM Cl^- d^-1); meta-chlorine removal was stimulated and higher proportions of tetra-CBs (43.2-46.6%), the predominant dechlorination products, were observed compared to the open circuit conditions (23.7-25.1%). The dechlorination rate was further enhanced (14.1 μM Cl^- d^-1) by amendment with humin as a solid-phase redox mediator. After the suspension culture was renewed using an anaerobic medium, dechlorination activity was effectively maintained solely by cathodic biofilms, where cyclic voltammetry results indicated their redox activity. Electric potential had a significant effect on microbial community structure in the cathodic biofilm, where a greater abundance of Dehalococcoides (2.59-3.02%), as potential dechlorinators, was observed compared to that in the suspension culture (0.41-0.55%). Moreover, Dehalococcoides adhering to the cathode showed a higher chlorine removal rate than in the suspension culture. These findings provide insights into the dechlorination mechanism of cathodic biofilms involving Dehalococcoides for PCB mixtures and extend the application prospects of bioremediation to PCB contamination in the natural environment.

Iron-carbon material enhanced electrokinetic remediation of PCBs-contaminated soil

The high toxicity and persistence of polychlorinated biphenyls (PCBs) in the environment demands the development of effective remediation for PCBs-contaminated soils. In this study, electrokinetic (EK) remediation integrated with iron-carbon material (Fe/C) was established and used to remediate PCB28 (1 mg kg^-1) contaminated soil under a voltage gradient of 1 V cm^-1. Effects of Fe/C dosage, soil type, and remediation time were investigated. The operational condition was optimized as 4 g kg^-1 Fe/C, yellow soil, and 14 d-remediation, achieving PCB28 removal efficiency of 58.6 ± 8.8% and energy utilization efficiency of 146.5. Introduction of EK-Fe/C did not significantly affect soil properties except for slight soil moisture content increase and total Fe content loss. Soil electrical conductivity exhibited an increasing trend from anode to cathode attributed to EK-induced electromigration and electroosmosis. EK accelerated the corrosion and consumption of reactive Fe⁰/Fe₃C in Fe/C by generating acid condition. Fe/C in turn effectively prevented EK-induced soil acidification and maintained soil neutral to weak alkaline condition. A synergistic effect between EK and Fe/C was revealed by the order of PCB28 removal efficiency-EK-Fe/C (58.6 ± 8.8%) > EK (37.7 ± 1.6%) > Fe/C (6.8 ± 5.0%). This could be primarily attributed to EK and Fe/C enhanced Fenton reaction, where EK promoted Fe/C dissolution and H₂O₂ generation. In addition to oxidation by Fenton reaction generated ·OH, EK-mediated electrochemical oxidation, Fe/C-induced reduction and migration of Fe/C adsorbed PCBs were all significant contributors to PCB28 removal in the EK-Fe/C system. These findings suggest that the combination of EK and Fe/C is a promising technology for remediation of organics-contaminated soil.

Per- and Polyfluoroalkyl Substances (PFAS) in Integrated Crop-Livestock Systems: Environmental Exposure and Human Health Risks

Per- and polyfluoroalkyl substances (PFAS) are highly persistent synthetic organic contaminants that can cause serious human health concerns such as obesity, liver damage, kidney cancer, hypertension, immunotoxicity and other human health issues. Integrated crop–livestock systems combine agricultural crop production with milk and/or meat production and processing. Key sources of PFAS in these systems include firefighting foams near military bases, wastewater sludge and industrial discharge. Per- and polyfluoroalkyl substances regularly move from soils to nearby surface water and/or groundwater because of their high mobility and persistence. Irrigating crops or managing livestock for milk and meat production using adjacent waters can be detrimental to human health. The presence of PFAS in both groundwater and milk have been reported in dairy production states (e.g., Wisconsin and New Mexico) across the United States. Although there is a limit of 70 parts per trillion of PFAS in drinking water by the U.S. EPA, there are not yet regional screening guidelines for conducting risk assessments of livestock watering as well as the soil and plant matrix. This systematic review includes (i) the sources, impacts and challenges of PFAS in integrated crop–livestock systems, (ii) safety measures and protocols for sampling soil, water and plants for determining PFAS concentration in exposed integrated crop–livestock systems and (iii) the assessment, measurement and evaluation of human health risks related to PFAS exposure.

Spatial distribution and source identification of persistent organic pollutants in the sediments of the Yeşilırmak River and coastal area in the Black Sea

Surface sediments from the Yeşilırmak River and the near coastal area in the Black Sea were collected using sediment traps to assess the spatial distributions of persistent organic pollutants and find their potential sources. Analyses were carried out to determine the concentrations of the persistent organic pollutants of seventeen polychlorinated dibenzo-p-dioxins and dibenzofurans, sixteen polycyclic aromatic hydrocarbons, seven polychlorinated biphenyls, and eight organochlorine pesticides using high-resolution gas chromatography-mass spectrometry and gas chromatography-tandem mass spectrometry systems. Analysis showed that the three main components of persistent organic pollutants (polychlorinated dibenzo-p-dioxins and dibenzofurans, polycyclic aromatic hydrocarbons, and organochlorine pesticides) primary sources are industrial activities. In addition, the widespread occurrence of persistent organic pollutants in the watershed surface sediments taken from the Yeşilırmak River basin showed that agricultural and urban areas are also diffuse persistent organic pollutants sources.

Distribution, Source and Potential Risk Assessment of Polychlorinated Biphenyls (PCBs) in Sediments from the Liaohe River Protected Area, China

This study aimed to assess the occurrence, distribution, toxicity equivalency and health risks of dl-PCBs (dioxin-like PCBs) from nine sites collected in surface sediments from Liaohe River Protected Area. ∑dl-PCBs concentrations in sediments range from 79.2 to 365.1 pg/g. Sediment profiles showed that pentachlorobiphenyl is the most abundant congener among all sampling sites. The results of principal component analysis and cluster analysis indicated that PCBs were mainly derived from electronic waste and paint additives in the sediments of Liaohe River Protected Area. Toxic equivalent quantity (TEQ) values of the PCBs in the Liaohe River Protected Area sediments are at comparatively lower levels compared with the previously reported data. Hazardous ratio (HR) for human health risk assessment allied to cancer was found to be lower than the non-carcinogenic risk assessment within an acceptable range.

Background exposure to polychlorinated biphenyls and all-cause, cancer-specific, and cardiovascular-specific mortality: A systematic review and meta-analysis

BACKGROUND

Polychlorinated biphenyls (PCBs) are a large family of man-made organic, ubiquitous, and persistent contaminants with endocrine-disrupting properties. PCBs have been associated with numerous adverse health effects and were classified as carcinogenic to humans, but their long-term impact on mortality risk in the general population is unknown.

OBJECTIVE

To conduct a systematic review and meta-analysis in order to assess whether background exposure levels of PCBs increase all-cause and cancer- and cardiovascular-specific mortality risk in the general population.

METHODS

We searched the Pubmed, Web of Science, Cochrane Library, and Embase databases for eligible studies up to 1st of January, 2021. We included cohort and nested-case control studies comparing the lowest vs. the highest background exposure level of PCBs in the general population and reporting data for all-cause mortality and/or cancer-/cardiovascular-specific mortality. Studies reporting occupational and accidental exposures were excluded. Random-effects meta-analysis was used to estimate summary relative risks (SRRs) and 95% confidence intervals (CIs). Heterogeneity across studies was assessed by I2 statistics, and publication bias both graphically and using Egger's and Begg's tests. Quality of included studies was assessed using the National Toxicology Program/Office of Health Assessment and Translation (NTP/OHAT). Confidence in the body of evidence and related level of evidence were assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) based on the NTP/OHAT framework. The protocol was registered in PROSPERO (CRD42020178079).

RESULTS

The initial search led to 2,132 articles. Eight prospective cohort studies met our inclusion criteria, leading to 72,852 participants including 17,805 deaths. Overall exposure to PCBs was not statistically significantly associated with all-cause mortality (SRR = 1.13, 95% CI = 0.90-1.41, n = 7 studies, low certainty); however, dietary exposure to PCBs was associated with an increased risk of cardiovascular-specific mortality (SRR = 1.38, 95% CI = 1.14-1.66, n = 3 studies, moderate certainty), while no association was found with cancer-specific mortality (SRR = 1.07, 95% CI = 0.72-1.59, n = 5 studies, low certainty).

CONCLUSION

Our meta-analysis suggests that background exposure to PCBs is associated with an increased risk of cardiovascular-specific mortality in the general population with a "moderate" level of evidence. These findings should be interpreted with caution given the small number of studies on mortality in the general population.

Organochlorines and Polycyclic Aromatic Hydrocarbons as fingerprint of exposure pathways from marine sediments to biota

To elucidate the dynamics of a suite of organochlorine contaminants (PCBs, HCB), PAHs and Hg and verify the potential of these pollutants as reliable fingerprints of sources, an ensemble of marine sediments and organisms (finfish, shellfish species and Mytilus galloprovincialis) were analysed from the contaminated Augusta Bay (Southern Italy). The Hg and HCB concentration in the sediments exceeded the EQS of the Directive 2000/60/EU. Similarly, ∑PCB and selected PAHs were above the threshold limit set by regulation. The marine organisms showed Hg concentrations above CE 1881/2006. Contaminants in transplanted mussel evidenced an increased accumulation overtime and different distribution patterns between sampling sites. Analysis of the homolog composition of PCB congeners revealed comparable patterns between sediments and marine organisms and offered the opportunity to define a robust fingerprint for tracing contaminants transfer from the abiotic to the biotic compartments. These results were confirmed by the Fluoranthene/Pyrene, Hg and HCB distribution modes.

Trends of Diverse POPs in Air and Water Across the Western Atlantic Ocean: Strong Gradients in the Ocean but Not in the Air

Oceans have remained the least well-researched reservoirs of persistent organic pollutants (POPs) globally, due to their vast scale, difficulty of access, and challenging (trace) analysis. Little data on POPs exists along South America and the effect of different currents and river plumes on aqueous concentrations. Research cruise KN210-04 (R/V Knorr) offered a unique opportunity to determine POP gradients in air, water, and their air-water exchange along South America, covering both hemispheres. Compounds of interest included polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polybrominated diphenylethers (PBDEs), and polycyclic aromatic hydrocarbons (PAHs). Remote tropical Atlantic Ocean atmospheric concentrations varied little between both hemispheres; for HCB, BDEs 47 and 99, they were ∼5 pg/m³, PCBs were ∼1 pg/m³, α-HCH was ∼0.2 pg/m³, and phenanthrene and other PAHs were in the low 100s pg/m³. Aqueous concentrations were dominated by PCB 52 (mean 4.1 pg/L), HCB (1.6 pg/L), and β-HCH (1.9 pg/L), with other compounds <1 pg/L. Target PCBs tended to undergo net volatilization from the surface ocean, while gradients indicated net deposition for a-HCH. In contrast to atmospheric concentrations, which were basically unchanged between hemispheres, we detected strong gradients in aqueous POPs, with mostly nondetects in the tropical western South Atlantic. These results highlight the importance of currents and loss processes on ocean scales for the distribution of POPs.

Spatial Distribution, Bioconversion and Ecological Risk of PCBs and PBDEs in the Surface Sediment of Contaminated Urban Rivers: A Nationwide Study in China

Surface sediments of polluted urban rivers can be a reservoir of hydrophobic persistent organic pollutants (POPs). In this study, we comprehensively assessed the contamination of two groups of POPs, that is, polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs), in 173 black-odorous urban rivers in China. Spatial distribution of PCBs and PBDEs showed similar patterns but very different contamination levels in surface sediments, that is, average concentrations of 10.73 and 401.16 ng/g dw for the ∑PCBs and ∑PBDEs, respectively. Tetra-/di-CBs and deca-BDE are major PCBs and PBDEs and accounted for 59.11 and 95.11 wt % of the ∑PCBs and ∑PBDEs, respectively. Compared with the persistence of PBDEs, the EF changes of chiral PCBs together with previous cultivation evidence indicated indigenous bioconversion of PCBs in black-odorous urban rivers, particularly the involvement of uncharacterized Dehalococcoidia in PCB dechlorination. Major PCB sources (and their relative contributions) included pigment/painting (25.36%), e-waste (22.92%), metallurgical industry (13.25%), and e-waste/biological degradation process (10.95%). A risk assessment indicated that exposure of resident organisms in urban river sediments to deca-/penta-BDEs could pose a high ecological risk. This study provides the first insight into the contamination, conversion and ecological risk of PCBs and PBDEs in nationwide polluted urban rivers in China.

Persistent Organic Pollutants (POPs) and Related Chemicals in the Global Environment: Some Personal Reflections

Persistent organic pollutants (POPs) and related chemicals are fascinating because of their combination of physical-chemical properties and complex effects. Most are man-made, but some also have natural origins. They are persistent in the environment, but they can be broken down variously by biodegradation, atmospheric reactions, and abiotic transformations. They can exist in the gas or particle phases, or both, in the atmosphere and in the dissolved or particulate phases, or both, in water. These combinations mean that they may undergo long-range transport in the atmosphere or oceans, or they may stay close to sources. Hence, emissions from one country are frequently a source of contamination to another country. They are also usually lipophilic, so-combined with persistence-this means they can accumulate in organisms and biomagnify through food chains. We all have a baseline of POPs residues in our tissues, even the unborn fetus via placental transfer and the newly born baby via mother's milk. POPs in biological systems occur in mixtures, so confirming effects caused by POPs on humans and other top predators is never straightforward. Depending on which papers you read, POPs may be relatively benign, or they could be responsible for key subchronic and chronic effects on reproductive potential, on immune response, as carcinogens, and on a range of behavioral and cognitive end points. They could be a factor behind diseases and conditions which have been increasingly reported and studied in modern societies. In short, they are endlessly fascinating to scientists and a nightmare to regulators and policy makers.

Chemical hazard in glacial melt? The glacial system as a secondary source of POPs (in the Northern Hemisphere). A systematic review

Toxicity of compounds belonging to persistent organic pollutants (POPs) is widely known, and their re-emission from glaciers has been conclusively demonstrated. However, the harmful effects associated with such secondary emissions have yet to be thoroughly understood, especially in the spatial and temporal context, as the existing literature has a clear sampling bias with the best recognition of sites in the European Alps. In this review, we elaborated on the hazards associated with the rapid melting of glaciers releasing organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and polycyclic aromatic hydrocarbons (PAHs). To this end, we collated knowledge on: (1) the varying glacier melt rate across the Northern Hemisphere, (2) the content of POPs in the glacial system components, including the less represented areas, (3) the mechanisms of POPs transfer through the glacial system, including the importance of immediate emission from snow melt, (4) risk assessment associated with POPs re-emission. Based on the limited existing information, the health risk of drinking glacial water can be considered negligible, but consuming aquatic organisms from these waters may increase the risk of cancer. Remoteness from emission sources is a leading factor in the presence of such risk, yet the Arctic is likely to be more exposed to it in the future due to large-scale processes shifting atmospheric pollution and the continuous supply of snow. For future risk monitoring, we recommend to explore the synergistic toxic effects of multiple contaminants and fill the gaps in the spatial distribution of data.

A state-of-the-science review of polychlorinated biphenyl exposures at background levels: relative contributions of exposure routes

Exposure to polychlorinated biphenyls (PCBs) can occur through multiple routes and sources, including dietary intake, inhalation, dermal contact, and ingestion of dust and soils. Dietary exposure to PCBs is often considered the primary exposure route for the general population; however, recent studies suggest an increasing contribution from indoor inhalation exposure. Here, we aim to estimate the relative contribution of different PCB exposure pathways for the general population, as well as for select age groups. We conducted a targeted literature review of PCB concentrations in environmental media, including indoor and outdoor air, indoor dust, and soils, as well as of total dietary intake. Using the average concentrations from the studies identified, we estimated PCB exposure through different routes for the general population. In addition, we assessed exposure via environmental media for select age groups. We identified a total of 70 studies, 64 that provided background PCB concentrations for one or more of the environmental media of interest and 6 studies that provided estimates of dietary intake. Using estimates from studies conducted worldwide, for the general population, dietary intake of PCBs was the major exposure pathway. In general, our review identifies important limitations in the data available to assess population exposures, highlighting the need for more current and population-based estimates of PCB exposure, particularly for indoor air and dietary intake.

Do dissipation and transformation of γ-HCH and p,p'-DDT in soil respond to a proxy for climate change? Insights from a field study on the eastern Tibetan Plateau

While the influence of climate change on the fate of persistent organic pollutants (POPs) is becoming a topic of global concern, it has yet to be demonstrated how POPs and their transformation products in soil respond to a changing climate at the local scale. We conducted a year-long field experiment with spiked soils to investigate the impact of climate on the dissipation of γ-hexachlorocyclohexane (γ-HCH) and p,p'-dichlorodiphenyltrichloroethane (p,p'-DDT) as well as the formation of their products. Four sites along an elevational gradient on the eastern Tibetan Plateau were selected to represent four scenarios ranging from a dry and cold to a warm and humid climate. Based on the measured concentrations of the two pesticides and their transformation products, we calculated the dissipation rates of γ-HCH and p,p'-DDT in soil using two biphasic kinetic models, and the formation rates of transformation products using a mid-point rectangular approximation method. The spiked γ-HCH generally showed the expected decrease in dissipation from soils with increasing altitudes, and therefore decreasing temperature and precipitation, whereas dissipation of p,p'-DDT was influenced more by photolysis and sequestration in soil. The formation rates of the primary products of γ-HCH (i.e. γ-HCH→PeCCH and γ-HCH→TeCCH) and p,p'-DDT (i.e. p,p'-DDT→p,p'-DDE and p,p'-DDT→p,p'-DDD) indicate that a warmer and wetter climate favors dechloroelimination (anaerobic biodegradation) over dehydrochlorination (aerobic biodegradation). The significantly longer dissipation half-lives of γ-HCH at the coldest site suggests that the fate of POPs in frozen regions (e.g. polar regions) needs more attention. Overall, the fate of more volatile chemicals (e.g. γ-HCH) might be more responsive to the climate change.

Enhanced plant-microbe remediation of PCBs in soil using enzyme modification technique combined with molecular docking and molecular dynamics

The study on the enhanced mechanisms of the enzymes involved in plant absorption, plant degradation, and microbial mineralization in the remediation of soils contaminated with polychlorinated biphenyls (PCBs) is of great significance for the application of plant-microbe combined remediation technique in PCB-contaminated soils. The present study first used a combination of molecular docking and molecular dynamics methods to calculate the effects of the plant absorption enzyme, plant degradation enzyme, and microbial mineralization enzyme on the PCBs in the soil environment. A multifunctional plant degradation enzyme was constructed with three functional roles of absorption, degradation, and mineralization using amino acid sequence recombination and site-directed mutagenesis to modify the template of plant degradation enzyme. Finally, using the Taguchi experimental design-assisted molecular dynamics simulation method, the suitable external environmental conditions of plant-microbe combined remediation of the PCB-contaminated soil were determined. In total, six multifunctional plant degradation enzymes were designed, which exhibited a significantly improved efficiency of PCB degradation. In comparison to the complex of plant absorption enzyme, plant degradation enzyme, and microorganism mineralization enzyme (6QIM-3GZX-1B85), the six multifunctional plant degradation enzymes exhibited significantly higher efficiency (2.10-2.38 times) in degrading the PCBs, with a maximum of 2.69 times under suitable external environmental conditions.

Validation of a Method Scope Extension for the Analysis of POPs in Soil and Verification in Organic and Conventional Farms of the Canary Islands

Persistent organic pollutants (POPs) are among the most relevant and dangerous contaminants in soil, from where they can be transferred to crops. Additionally, livestock animals may inadvertently consume relatively high amounts of soil attached to the roots of the vegetables while grazing, leading to indirect exposure to humans. Therefore, periodic monitoring of soils is crucial; thus, simple, robust, and powerful methods are needed. In this study, we have tested and validated an easy QuEChERS-based method for the extraction of 49 POPs (8 PBDEs, 12 OCPs, 11 PAHs, and 18 PCBs) in soils and their analysis by GC-MS/MS. The method was validated in terms of linearity, precision, and accuracy, and a matrix effect study was performed. The limits of detection (LOD) were established between 0.048 and 3.125 ng g⁻¹ and the limits of quantification (LOQ) were between 0.5 and 20 ng g⁻¹, except for naphthalene (50 ng g⁻¹). Then, to verify the applicability of the validated method, we applied it to a series of 81 soil samples from farms dedicated to mixed vegetable cultivation and vineyards in the Canary Islands, both from two modes of production (organic vs. conventional) where residues of OCPs, PCBs, and PAHs were found.

A computational insight into endocrine disruption by polychlorinated biphenyls via non-covalent interactions with human nuclear receptors

Production of polychlorinated biphenyls (PCBs) was banned a long time ago because of their harmful health effects but humans continue to be exposed to residual PCBs in the environment. In this study, the susceptibility of human nuclear receptors to binding by PCBs was investigated using molecular docking simulation. Findings revealed that PCBs belonging to ortho-substituted, mono-ortho-substituted and non-ortho-substituted congeners could bind to agonistic conformations of androgen (AR), estrogen (ER α and ER β), glucocorticoid (GR) and thyroid hormone (TR α and TR β) receptors as well as antagonistic conformation of androgen receptor (AR an) but only ortho-substituted and mono-ortho-substituted PCBs could bind to estrogen receptors in their antagonistic conformations (ER α an and ER β an). Further molecular docking analyses showed that PCBs mimic the modes of interaction observed for the co-crystallized ligands in the crystal structures of the affected receptors, utilizing 81%, 83%, 78%, 60%, 75%, 60%, 86%, 100% and 75% of the amino acid residues utilized by the co-crystallized ligands for binding in AR, AR an, ER α, ER α an, ER β, ER β an, GR, TR α and TR β respectively. This computational study suggests that PCBs may cause endocrine disruption via formation of non-covalent interactions with androgen, estrogen, glucocorticoid and thyroid hormone receptors.

Degradation of PCB67 in soil using the heterogenous Fenton process induced by montmorillonite supported nanoscale zero-valent iron

Montmorillonite supported nanoscale zero-valent iron (MMT-nZVI) was prepared and proved to be able to induce the heterogenous Fenton process for better removal of 2,3',4,5-tetrachlorobiphenyl (PCB67) in a long-term polluted soil. PCB67 removal depended highly on the dosages of MMT-nZVI and H₂O₂, and the initial pH, with the highest removal rate of 76.38% at conditions of H₂O₂ 45.99 g·kg^-1, MMT-nZVI 29.88 g·kg^-1 and initial pH 3.5 after 80 min of reaction. Furthermore, PCB67 could be removed in a wider pH range (from 3.5 to near neutrality), with a loss of 13.6% in removal rate at neutral pH. With an activation energy of 21.4 kJ·mol^-1, the degradation of PCB67 was an endothermic and diffusion-controlled process and followed the pseudo-first-order kinetics. That Fe²⁺ was supplied through aerobic corrosion of MMT-nZVI to activate H₂O₂ for·OH production was the possible mechanism of PCB67 degradation, leading to complete mineralization of PCB67 through two proposed pathways, with the intermediates of ethylbenzene and 3-hepten-2-one, as well as dibutyl phthalate and butyl acetate respectively.

Occurrence of dioxin-like POPs in soils from urban green space in a metropolis, North China: implication to human exposure

Urban green space is a special space for urban life and natural contact and has an important impact on human health. However, little information is available on dioxin-like persistent organic pollutants (POPs) in the soils from the specific areas. We measured the concentrations of polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and polychlorinated biphenyls (PCBs) in the soils from urban green space in a metropolis, North China, and found total concentrations of PCDD/Fs, PCBs, and PCNs in the range of 11.5-91.4, 14.7-444, and 82.5-848 pg/g, respectively. It was worth to notice that the concentrations of PCDD/Fs in public park soil from urban center were significantly higher than those in the road greenbelts and resident lawns (Kruskal-Wallis test, p = 0.004). The source analysis indicated that sewage sludge from wastewater treatment plants were important sources of PCNs and PCDD/Fs in urban green land soils, and atmospheric deposition from municipal solid waste incinerator (MSWI) also play an important role in PCDD/F sources. The rough exposure risk evaluation showed that the residents were at a safe level with the daily doses being 0.172-3.144 fg/kg BW/day for children and 0.022-0.406 fg/kg BW/day for adult. Due to the complex and variable sources of PCDD/Fs in urban areas, dioxin-like POPs in urban green land should be given more attention to weaken human exposure.

Organochlorine compounds pose health risks to the Qinling Giant Panda (Ailuropoda melanoleuca qinlingensis)

To assess organochlorine compound (OC) contamination, its possible sources, and adverse health impacts on giant pandas, we collected soil, bamboo, and panda fecal samples from the habitat and research center of the Qinling panda (Ailuropoda melanoleuca qinlingensis)-the rarest recognized panda subspecies. The polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) concentrations were comparatively low which suggests that moderate sources of OC pollution currently. OC levels were lower in samples from nature reserve than in those collected from pandas held in captivity, and OC levels within the reserve increased between functional areas in the order: core, buffer and experimental. The distribution patterns, and correlation analyses, combined with congener distributions suggested PCBs and OCPs originated from similar sources, were dispersed by similar processes, being transported through atmosphere and characterized by historical residues. Backward trajectory analyses results, and detected DRINs (aldrin, dieldrin, endrin and isodrin) both suggest long-range atmospheric transport of pollution source. PCBs pose potential cancer risk, and PCB 126 was the most notable toxicant as assessed be the high carcinogenic risk index. We provide data for health risk assessment that can guide the identification of priority congeners, and recommend a long-term monitoring plan. This study proposes an approach to ecotoxicological threats whereby giant pandas may be used as sentinel species for other threatened or endangered mammals. By highlighting the risks of long-distance transmission of pollutants, the study emphasizes the importance of transboundary cooperation to safeguard biodiversity.