Greenhouse gas emission reductions from domestic anaerobic digesters linked with sustainable sanitation in rural China

Anaerobic Digestion as a Core Technology in Addressing the Global Sanitation Crisis: Challenges and Opportunities

Successfully addressing the complex global sanitation problem is a massive undertaking. Anaerobic digestion (AD), coupled with post-treatment, has been identified as a promising technology to contribute to meeting this goal. It offers multiple benefits to the end users, such as the potential inactivation of pathogenic microorganisms in waste and the recovery of resources, including renewable energy and nutrients. This feature article provides an overview of the most frequently applied AD systems for decentralized communities and low- and lower-middle-income countries with an emphasis on sanitation, including technologies for which pathogen inactivation was considered during the design. Challenges to AD use are then identified, such as experience, economics, knowledge/training of personnel and users, and stakeholder analysis. Finally, accelerators for AD implementation are noted, such as the inclusion of field studies in academic journals, analysis of emerging contaminants, the use of sanitation toolboxes and life cycle assessment in design, incorporation of artificial intelligence in monitoring, and expansion of undergraduate and graduate curricula focused on Water, Sanitation, and Hygiene (WASH).

Recognition on characteristics and applicability of typical modes for manure & sewage management in pig farming: A case study in Hebei, China

Scale-up intensive pig farming can increase profitability by economies of large scale, but it also exacerbates environmental pollution caused by the disordered discharge of manure and sewage. Manure & sewage management (MSM) is critical to mitigate environmental pressure and reuse livestock waste. However, the corresponding MSM measures adopted by pig farmers are multitudinous in reality, due to the diversity of MSM methods and heterogeneity of farmers' characteristics and behaviors. Thus, this study empirically categorized five typical MSM modes (i.e., traditional simple mode (TSM), mixed processing mode (MPM), semi-biogas mode (SBM), professional processing with simple utilization mode (PPSUM) and professional processing with full utilization mode (PPFUM)) by clustering analysis, based on the field data from 406 pig farms, and further discriminated farmers' heterogeneous characteristics on corresponding mode adoption. Results revealed that each mode was distinctive. The applicability of the corresponding mode was reflected in the synthesis deliberation, involving farming structure, land, farmers' characteristic and their subjective awareness. Farmers' education level and pro-environmental perception are significantly promoted to adopt technology-intensive MSM modes. Scale upgrading has a positive effect on mechanization adoption and diversified strategies application. Land as an unalterable objective factor restricted the extension of MSM modes based on field returning. Conclusions clarified typical MSM modes and provided references to individual pig farms on appropriate mode selection, further enhancing the efficiency of MSM and contributing to the sustainability of green development of pig farming in China.

Sanitation for Low-Income Regions: A Cross-Disciplinary Review

Sanitation research focuses primarily on containing human waste and preventing disease; thus, it has traditionally been dominated by the fields of environmental engineering and public health. Over the past 20 years, however, the field has grown broader in scope and deeper in complexity, spanning diverse disciplinary perspectives. In this article, we review the current literature in the range of disciplines engaged with sanitation research in low- and middle-income countries (LMICs). We find that perspectives on what sanitation is, and what sanitation policy should prioritize, vary widely. We show how these diverse perspectives augment the conventional sanitation service chain, a framework describing the flow of waste from capture to disposal. We review how these perspectives can inform progress toward equitable sanitation for all [i.e., Sustainable Development Goal (SDG) 6]. Our key message is that both material and nonmaterial flows-and both technological and social functions-make up a sanitation "system." The components of the sanitation service chain are embedded within the flows of finance, decision making, and labor that make material flows of waste possible. The functions of capture, storage, transport, treatment, reuse, and disposal are interlinked with those of ensuring equity and affordability. We find that a multilayered understanding of sanitation, with contributions from multiple disciplines, is necessary to facilitate inclusive and robust research toward the goal of sanitation for all.

Green-house gas mitigation capacity of a small scale rural biogas plant calculations for Bangladesh through a general life cycle assessment

Calculations towards determining the greenhouse gas mitigation capacity of a small-scale biogas plant (3.2 m³ plant) using cow dung in Bangladesh are presented. A general life cycle assessment was used, evaluating key parameters (biogas, methane, construction materials and feedstock demands) to determine the net environmental impact. The global warming potential saving through the use of biogas as a cooking fuel is reduced from 0.40 kg CO₂ equivalent to 0.064 kg CO₂ equivalent per kilogram of dung. Biomethane used for cooking can contribute towards mitigation of global warming. Prior to utilisation of the global warming potential of methane (from 3.2 m³ biogas plant), the global warming potential is 13 t of carbon dioxide equivalent. This reduced to 2 t as a result of complete combustion of methane. The global warming potential saving of a bioenergy plant across a 20-year life cycle is 217 t of carbon dioxide equivalent, which is 11 t per year. The global warming potential of the resultant digestate is zero and from construction materials is less than 1% of total global warming potential. When the biogas is used as a fuel for cooking, the global warming potential will reduce by 83% compare with the traditional wood biomass cooking system. The total 80 MJ of energy that can be produced from a 3.2 m³ anaerobic digestion plant would replace 1.9 t of fuel wood or 632 kg of kerosene currently used annually in Bangladesh. The digestate can also be used as a nutrient rich fertiliser substituting more costly inorganic fertilisers, with no global warming potential impact.

Biogas Cook Stoves for Healthy and Sustainable Diets? A Case Study in Southern India

Alternative cook stoves that replace solid fuels with cleaner energy sources, such as biogas, are gaining popularity in low-income settings across Asia, Africa, and South America. Published research on these technologies focuses on their potential to reduce indoor air pollution and improve respiratory health. Effects on other cooking-related aspects, such as diets and women's time management, are less understood. In this study, in southern India, we investigate if using biogas cook stoves alters household diets and women's time management. We compare treatment households who are supplied with a biogas cook stove with comparison households who do not have access to these stoves, while controlling for several socio-economic factors. We find that diets of treatment households are more diverse than diets of comparison households. In addition, women from treatment households spend on average 40 min less cooking and 70 min less collecting firewood per day than women in comparison households. This study illustrates that alongside known benefits for respiratory health, using alternative cook stoves may benefit household diets and free up women's time. To inform development investments and ensure these co-benefits, we argue that multiple dimensions of sustainability should be considered in evaluating the impact of alternative cook stoves.

Life Cycle Assessment of Biogas Production in Small-scale Household Digesters in Vietnam

Small-scale household digesters have been promoted across Asia as a sustainable way of handling manure. The major advantages are that they produce biogas and reduce odor. However their disadvantages include the low recycling of nutrients, because digestate is dilute and therefore difficult to transport, and the loss of biogas as a result of cracks and the intentional release of excess biogas. In this study, life cycle assessment (LCA) methodology was used to assess the environmental impacts associated with biogas digesters in Vietnam. Handling 1,000 kg of liquid manure and 100 kg of solid manure in a system with a biogas digester reduced the impact potential from 4.4 kg carbon dioxide (CO2) equivalents to 3.2 kg CO2 equivalents compared with traditional manure management. However, this advantage could easily be compromised if digester construction is considered in the LCA or in situations where there is an excess of biogas which is intentionally released. A sensitivity analysis showed that biogas digesters could be a means of reducing global warming if methane emissions can be kept low. In terms of eutrophication, farms with biogas digesters had 3 to 4 times greater impacts. In order to make biogas digesters sustainable, methods for recycling digestates are urgently required.

Anaerobic co-digestion of steam-treated Quercus serrata chips and sewage sludge under mesophilic and thermophilic conditions

The biodegradation of Quercus serrata chips was evaluated by anaerobic digestion under various steam explosion conditions. In continuous experiments, untreated chips (W₀) and chips steam-treated at less than 1.0 MPa (W₁) and 2.0 MPa (W₄) were co-digested with sewage sludge (S₁ and S₂) taken from two different wastewater treatment plants. The apparent methane yield of W₁ and W₄ co-digested with S₁ (thermophilic) was 261 dm(3)/kgVS (volatile solids) and 248 dm(3)/kgVS, respectively. The apparent methane yield of W₄ co-digested with S₂ was 258 dm(3)/kgVS (mesophilic) and 271 dm(3)/kgVS (thermophilic). Methane production was inhibited by W₀ due to components released during hydrolysis. The methane conversion ratio of pretreated chips obtained in batch experiments varied from 40.5% to 53.8% (mesophilic) and from 49.0% to 63.7% (thermophilic). The methane conversion ratio increased with decreasing acid-soluble lignin content in the chips.

Estimating the health effects of greenhouse gas mitigation strategies: addressing parametric, model, and valuation challenges

BACKGROUND

Policy decisions regarding climate change mitigation are increasingly incorporating the beneficial and adverse health impacts of greenhouse gas emission reduction strategies. Studies of such co-benefits and co-harms involve modeling approaches requiring a range of analytic decisions that affect the model output.

OBJECTIVE

Our objective was to assess analytic decisions regarding model framework, structure, choice of parameters, and handling of uncertainty when modeling health co-benefits, and to make recommendations for improvements that could increase policy uptake.

METHODS

We describe the assumptions and analytic decisions underlying models of mitigation co-benefits, examining their effects on modeling outputs, and consider tools for quantifying uncertainty.

DISCUSSION

There is considerable variation in approaches to valuation metrics, discounting methods, uncertainty characterization and propagation, and assessment of low-probability/high-impact events. There is also variable inclusion of adverse impacts of mitigation policies, and limited extension of modeling domains to include implementation considerations. Going forward, co-benefits modeling efforts should be carried out in collaboration with policy makers; these efforts should include the full range of positive and negative impacts and critical uncertainties, as well as a range of discount rates, and should explicitly characterize uncertainty. We make recommendations to improve the rigor and consistency of modeling of health co-benefits.

CONCLUSION

Modeling health co-benefits requires systematic consideration of the suitability of model assumptions, of what should be included and excluded from the model framework, and how uncertainty should be treated. Increased attention to these and other analytic decisions has the potential to increase the policy relevance and application of co-benefits modeling studies, potentially helping policy makers to maximize mitigation potential while simultaneously improving health.

Net energy production and emissions mitigation of domestic wastewater treatment system: a comparison of different biogas-sludge use alternatives

Wastewater treatment systems are increasingly designed for the recovery of valuable chemicals and energy in addition to waste stream disposal. Herein, the life-cycle energy production and emissions mitigation of a typical domestic wastewater treatment system were assessed, in which different combinations of biogas use and sludge processing lines for industrial or household applications were considered. The results suggested that the reuse of biogas and sludge was so important in the system's overall energy balance and environmental performance that it may offset the cost in the plant's installation and operation. Combined heat and power and household utilization were two prior options for net energy production, provided an ideal power conversion efficiency and biogas production. The joint application of household biogas use and sludge nutrient processing achieved both high net energy production and significant environmental remediation across all impact categories, representing the optimal tradeoff for domestic wastewater treatment.

Low-carbon yak cheese: transition to biogas in a Himalayan socio-technical niche

This study looks at how potential for resilient low-carbon solutions can be understood and enhanced in the diverse environmental, economic and socio-political contexts in which actual scenarios of energy needs and diverse development pathways take shape. It discusses socio-technical transition approaches to assist implementation of a biogas digester system. This will replace fuelwood use in the high forests of Central Nepal, where yak cheese production provides livelihood income but is under threat from the Langtang National Park, which is concerned to protect biodiversity. Alternatives for digester design are discussed, and the consultative issues for deliberative processes among stakeholders' varied agendas raised.

Biochemical methane potential and anaerobic biodegradability of non-herbaceous and herbaceous phytomass in biogas production

The suitability of municipal plant waste for anaerobic digestion was examined using 57 different herbaceous and non-herbaceous samples. Biochemical methane potential (BMP) and anaerobic biodegradability were related to the degree of lignification and crystallinity of cellulose. The BMP of herbaceous garden plants (332.7 CH(4)NL kg VS(-1)) was high, although lower than that of energy crops (400-475 CH(4)NL kg VS(-1)). Herbaceous wild plants from natural grassland contained most lignocelluloses, leading to relatively low BMP (214.0 CH(4)NL kg VS(-1)). Non-herbaceous phytomass had a high degree of lignification and a high concentration of crystalline cellulose, but due to the content of non-woody parts with a low concentration of lignocellulose the BMP was relatively high, 199.9 and 172.0 CH(4)NL kg VS(-1) for hedge cuttings and woody cuttings, respectively. There were indications that a plant lignin concentration of 100 g kg VS(-1) is the critical biodegradability point in anaerobic digestion of phytomass.

Improving biogas separation and methane storage with multilayer graphene nanostructure via layer spacing optimization and lithium doping: a molecular simulation investigation

Methane is a desirable alternative to conventional fossil fuels, and also a main component of biogas from anaerobic fermentation of organic wastes. However, its relatively lower purity and poor storage by existing adsorbent materials negatively affect its wide application. Thus, efficient, cost-effective, and safe adsorbent materials for methane purification and storage are highly desired. In this study, multilayer graphene nanostructures (MGNs) with optimized structure are investigated as a potential adsorbent for this purpose. The effects of layer distance and Li doping on MGN performance in terms of methane storage and acid gas (H(2)S and CO(2)) separation from biogas are examined by molecular simulations. The mechanisms for the interactions between gas molecules and substrates are elucidated by analyzing the binding energy, geometric structures, and charge distribution from the first-principles calculations. The results show that nonhydrocarbons in biogas can be effectively separated using Li-doped MGNs with the optimal layer distance of 0.68 nm, and then the pure methane gas can be stored in MGNs with capacity satisfying the DOE target. This work offers a molecular-level insight into the interactions between gas molecules and MGNs and might provide useful information for development of new materials for methane purification and storage.