Identification of platinum and palladium particles emitted from vehicles and dispersed into the surface environment

Palladium Nanoparticles and Lung Health: Assessing Morphology-Dependent Subacute Toxicity in Rats and Toxicity Modulation by Naringin - Paving the Way for Cleaner Vehicular Emissions

The release of palladium nanoparticles (PdNPs) from autocatalytic converters has raised concerns regarding public health and the environment due to their emergence as anthropogenic contaminants. With growing vehicular population, there is an urgent need for comprehensive toxicological studies of PdNPs to mitigate their risk. The present study aims to investigate the effects of spherical PdNPs with average sizes of 20 and 80 nm, as well as Pd nanorods, on the lung function of female Wistar rats following oral exposure to environmentally relevant doses (1 and 10 μg/kg) over a period of 28 days. Various biological parameters were evaluated, including liver and kidney biochemical changes, lung oxidative stress markers (SOD, CAT, GSH, LPO), lung inflammatory markers (IL-1β, IL-8, IL-6, and TNF-α), and histopathological alterations in the lungs. Additionally, the potential mitigating effects of naringin on PdNPs-induced toxicity were examined. The results demonstrate a significant increase in oxidative stress, the onset of inflammation, and histological changes in lung alveolar sacs upon exposure to all tested particles. Specifically, 20@PdNPs and PdNRs exhibited higher cytotoxicity and pro-inflammatory properties compared to 80@PdNPs. Naringin effectively attenuated the pulmonary toxicity induced by PdNPs by modulating oxidative and inflammatory pathways. These findings contribute to the sustainable development of PdNPs for their future applications in the biomedical and environmental sectors, ensuring the advancement of safe and sustainable nanotechnology.

From lab to ecosystem: Understanding the ecological footprints of engineered nanoparticles

Nanotechnology has attained significant attention from researchers in past decades due to its numerous advantages, such as biocompatibility, biodegradability, and improved stability over conventional drug delivery systems. The fabrication of engineered nanoparticles (ENPs), including carbon nanotubes (CNTs), fullerenes, metallic and metal oxide-based NPs, has been steadily increasing day due to their wide range of applications from household to industrial applications. Fabricated ENPs can release different materials into the environment during their fabrication process. The effect of such materials on the environment is the primary concern with due diligence on the safety and efficacy of prepared NPs. In addition, an understanding of chemistry, reactivity, fabrication process, and viable mechanism of NPs involved in the interaction with the environment is very important. To date, only a limited number of techniques are available to assess ENPs in the natural environment which makes it difficult to ascertain the impact of ENPs in natural settings. This review extensively examines the environmental effects of ENPs and briefly discusses useful tools for determining NP size, surface charge, surface area, and external appearance. In conclusion, the review highlights the potential risks associated with ENPs and suggests possible solutions.

Dabcyl as a Naked Eye Colorimetric Chemosensor for Palladium Detection in Aqueous Medium

Industrial activity has raised significant concerns regarding the widespread pollution caused by metal ions, contaminating ecosystems and causing adverse effects on human health. Therefore, the development of sensors for selective and sensitive detection of these analytes is extremely important. In this regard, an azo dye, Dabcyl 2, was synthesised and investigated for sensing metal ions with environmental and industrial relevance. The cation binding character of 2 was evaluated by colour changes as seen by the naked eye, UV-Vis and 1H NMR titrations in aqueous mixtures of SDS (0.02 M, pH 6) solution with acetonitrile (99:1, v/v). Out of the several cations tested, chemosensor 2 had a selective response for Pd2+, Sn2+ and Fe3+, showing a remarkable colour change visible to the naked eye and large bathochromic shifts in the UV-Vis spectrum of 2. This compound was very sensitive for Pd2+, Sn2+ and Fe3+, with a detection limit as low as 5.4 × 10-8 M, 1.3 × 10-7 M and 5.2 × 10-8 M, respectively. Moreover, comparative studies revealed that chemosensor 2 had high selectivity towards Pd2+ even in the presence of other metal ions in SDS aqueous mixtures.

Effects of Platinum Nanoparticles on Rice Seedlings (Oryza sativa L.): Size-dependent Accumulation, Transformation, and Ionomic Influence

Platinum nanoparticles (PtNPs) are increasing in the environment largely due to their wide use and application in automobile and medical industries. The mechanism of uptake behavior of different-sized PtNPs and their association with PtNPs-induced phytotoxicity to plants remains unclear. The present study investigated PtNP uptake mechanisms and phytotoxicity simultaneously to further understand the accumulation and transformation dynamics. The uptake mechanisms were investigated by comparing the uptake and toxicological effects of three different-sized PtNPs (25, 50, and 70 nm) on rice seedlings across an experimental concentration gradient (0.25, 0.5, and 1 mg/L) during germination. The quantitative and qualitative results indicated that 70 nm-sized PtNPs were more efficiently transferred in rice roots. The increase in the PtNP concentration restricted the particle uptake. Particle aggregation was common in plant cells and tended to dissolve on root surfaces. Notably, the dissolution of small particles was simultaneous with the growth of larger particles after PtNPs entered the rice tissues. Ionomic results revealed that PtNP accumulation induced element homeostasis in the shoot ionome. We observed a significant positive correlation between the PtNP concentration and Fe and B accumulation in rice shoots. Compared to particle size, the exposure concentration of PtNPs had a stronger effect on the shoot ionomic response. Our study provides better understanding of the correlation of ionomic change and NP quantitative accumulation induced by PtNPs in rice seedlings.

Oxidative Stress, Cytotoxic and Inflammatory Effects of Urban Ultrafine Road-Deposited Dust from the UK and Mexico in Human Epithelial Lung (Calu-3) Cells

Road-deposited dust (RD) is a pervasive form of particulate pollution identified (typically via epidemiological or mathematical modelling) as hazardous to human health. Finer RD particle sizes, the most abundant (by number, not mass), may pose greater risk as they can access all major organs. Here, the first in vitro exposure of human lung epithelial (Calu-3) cells to 0−300 µg/mL of the ultrafine (<220 nm) fraction of road dust (UF-RDPs) from three contrasting cities (Lancaster and Birmingham, UK, and Mexico City, Mexico) resulted in differential oxidative, cytotoxic, and inflammatory responses. Except for Cd, Na, and Pb, analysed metals were most abundant in Mexico City UF-RDPs, which were most cytotoxic. Birmingham UF-RDPs provoked greatest ROS release (only at 300 µg/mL) and greatest increase in pro-inflammatory cytokine release. Lancaster UF-RDPs increased cell viability. All three UF-RDP samples stimulated ROS production and pro-inflammatory cytokine release. Mass-based PM limits seem inappropriate given the location-specific PM compositions and health impacts evidenced here. A combination of new, biologically relevant metrics and localised regulations appears critical to mitigating the global pandemic of health impacts of particulate air pollution and road-deposited dust.

Cycling of Pt, Pd, and Rh Derived from Catalytic Converters: Potential Pathways and Biogeochemical Processes

The present study is an integrated approach to the Pt, Pd, and Rh cycling derived from catalytic converters along highway roadsides of the Athens Basin, including their contents, the dispersed Pt- and Pd-bearing nano- and microparticles in dust and bioaccumulation in plants, aiming to assess the auto-catalyst-derived environmental impact to the large city of Athens and the potential human health risk. The determined mean values of 314 Pt, 510 Pd, and 23 Rh (all in μg/kg) in dust samples are much lower than the 2070 μg/kg Pt and 1985 μg/kg Pd contents in gully pots in the Katechaki peripheral highway and higher than the mean values of 230 Pt, 300 Pd, and 13 Rh (all in μg/kg) in the soil samples. With the exception of two samples from gully pots, from 51% to 70% of the samples (for the Pd and Pt, respectively) fall in the range from 100 to 400 μg/kg. The calculated accumulation factors showed means of 3.88 μg/kg Pd and 2.95 μg/kg Pt for plants and tree leaves, but any significant difference (t-test) is lacking, and they are much lower than those reported for roots of plants (literature data). Although the Pt, Pd, and Rh bioaccumulation factors for shoots of plants/crops are relatively low, the increasing number of cars with catalytic converters in Greece and the relatively high bioaccumulation in the food chain may highlight a potential risk for human health and ecosystems, and the need for special attention on their bioaccumulation and bioaccessibility on a global scale.

Palladium nanoparticles as emerging pollutants from motor vehicles: An in-depth review on distribution, uptake and toxicological effects in occupational and living environment

Palladium nanoparticles (PdNPs) play an integral role in motor vehicles as the primary vehicle exhaust catalyst (VEC) for tackling environmental pollution. Automobiles equipped with Pd-based catalytic converters were introduced in the mid-1970s and ever since the demand for Pd has steadily increased due to stringent emission standards imposed in many developed and developing countries. However, at the same time, the increasing usage of Pd in VECs has led to the release of nano-sized Pd particles in the environment, thus, emerging as a new source of environmental pollution. The present reports in the literature have shown gradual increasing levels of Pd particles in different urban environmental compartments and internalization of Pd particles in living organisms such as plants, aquatic species and animals. Occupational workers and the general population living in urban areas and near major highways are the most vulnerable as they may be chronically exposed to PdNPs. Risk assessment studies have shown acute and chronic toxicity exerted by PdNPs in both in-vitro and in-vivo models but the underlying mechanism of PdNPs toxicity is still not fully understood. The review intends to provide readers with an in-depth account on the demand and supply of Pd, global distribution of PdNPs in various environmental matrices, their migration and uptake by living species and lastly, their health risks, so as to serve as a useful reference to facilitate further research and development for safe and sustainable technology.

Bio-engineered palladium nanoparticles: model for risk assessment study of automotive particulate pollution on macrophage cell lines

The surge in vehicular activity in densely populated areas has led to an increased concentration of airborne palladium nanoparticles (PdNPs) in the environment. Recent toxicity data have indicated that PdNPs exhibit adverse effects in in vitro and in vivo models, however, their effect on the immune system is not fully understood. Therefore, in the present study, we aimed to evaluate possible toxic effects of bio-engineered palladium nanoparticles on the murine macrophage cell line (J774). Here we prepared palladium nanoparticles using aqueous leaf extract of Parthenium hysterophorus and characterized them by UV-Vis spectroscopy, XRD, FT-IR spectroscopy, HR-TEM, EDX, SEM and zeta potential. Toxicity parameters such as cell viability, cell membrane integrity, induction of apoptosis and ROS production were assessed on J774 cell lines. Spherical palladium nanoparticles of mean size ∼4 nm, when subjected to time and dose-dependent cytotoxicity assay, showed cell viability was >95% at lower doses (25, 200 μg mL-1) and <50% at higher doses of palladium nanoparticles (400, 500 μg mL-1) after 24 hours of incubation. We also observed cell membrane injury at higher doses by lactate dehydrogenase assay. The induction of apoptosis observed was moderate. H2DCFDA assay revealed visible cell damage which could be due to modest levels of ROS generation. The detection of Pd in the road-dust samples of New Delhi using inductively coupled plasma-mass spectroscopy (ICP-MS) technique was also investigated.

Estimating light-duty vehicles' contributions to ambient PM2.5 and PM10 at a near-highway urban elementary school via elemental characterization emphasizing rhodium, palladium, and platinum

The primary objective of this research is to accurately estimate light-duty vehicles' (LDVs') emissions of PM_2.5 and PM₁₀ over the course of a year within the property line of an inner-city school located adjacent to a heavily-trafficked interstate highway by measuring platinum group elements (PGEs - Rh, Pd, and Pt) along with 49 other major and trace elements. Amongst PGEs, ambient Pd concentrations were the highest, averaging 11 pg/m³ in PM₁₀ and 4.0 pg/m³ in PM_2.5 followed by Pt (3.5 pg/m³ in PM₁₀ and 1.4 pg/m³ in PM_2.5), and Rh (1.6 pg/m³ in PM₁₀ and 0.52 pg/m³ in PM_2.5). Simultaneous three-component variations in Rh, Pd, and Pt in both PM size classes at this surface site closely matched the composition of (i) a mixed random lot of recycled autocatalysts obtained from numerous LDVs and (ii) PM inside a proximal underwater tunnel open only to light-duty vehicles. Additionally, quantitative estimates of LDV contributions to ambient PM calculated by chemical mass balance modeling (CMB) were strongly correlated with PGE abundances. Therefore, PGEs predominantly originated from gasoline-driven motor vehicles validating them as unique LDV tracers. Further, CMB estimated that vehicles contributed 37% on average (12-67%) to PM₁₀ and 49% on average (25-73%) to PM_2.5. Evidence is also presented for a subset of other trace metals; i.e. Cu, As, Mo, Cd, and Sb to also be relatively strong LDV tracers. Results highlight the importance of measuring PGEs in addition to numerous other elements in PM to accurately apportion aerosols emanating from LDVs, which will better isolate public health and environmental impacts associated with the transportation sector.

Speciation analysis of Pt and Rh in urban road dust leachates

Road dust is a major reservoir of anthropogenic Pt and Rh. However, information about how these elements are released to the aquatic systems under environmentally relevant conditions is scarce. In this work, an innovative combination of analytical strategies is used to provide insight into the speciation analysis of those elements. A composite sample of road dust thoroughly characterized was incubated over 7 days in synthetic rainwater and seawater. In the filtered (<0.45 μm) solutions, truly dissolved Pt and Rh concentrations were measured by adsorptive cathodic stripping voltammetry, while total concentrations were determined by inductively coupled plasma mass spectrometry. Truly dissolved species corresponded to a small fraction of total Pt and Rh in the road dust; accordingly, values of 0.01% and 0.1% were obtained in both media for Pt and Rh, respectively, which remained constant over time. The concentration of total filter-passing species predominates for both elements by a factor of 10 and 2-3 for Pt and Rh, respectively, evidencing that particulate species coexist with truly dissolved forms. Temporal variations were observed for Pt, as opposed to Rh. These findings contribute to the gap in knowledge regarding Pt and Rh mobility in aquatic systems.

On the Crucial Role of Isolated Electronic States in the Thermal Reaction of ReC+ with Dihydrogen

Presented here is that isolated, long‐lived electronic states of ReC⁺ serve as the root cause for distinctly different reactivities of this diatomic ion in the thermal activation of dihydrogen. Detailed high‐level quantum chemical calculations support the experimental findings obtained in the highly diluted gas phase using FT‐ICR mass spectrometry. The origin for the existence of these long‐lived excited electronic states and the resulting implications for the varying mechanisms of dihydrogen splitting are addressed.

Palladium release from catalytic converter materials induced by road de-icer components chloride and ferrocyanide

Environmental levels of platinum group elements (PGEs) are rising due to emissions of vehicle catalytic converter (VCC) materials containing palladium, platinum and rhodium. When these PGE-containing VCC materials are exposed to soil and water, coordination complex formation with ligands present in the environment may mobilize PGEs into solution, particularly Pd. Road de-icing salt contains two ligands with high affinities for Pd²⁺: chloride (Cl^-) from NaCl and cyanide (CN^-) from ferrocyanide (Fe(CN)₆^4-) anti-caking agents. Batch leaching studies of VCC materials were conducted with solutions representative of de-icer-contaminated road runoff at pH 8 and room temperature for 48 h. Ferrocyanide (FC) concentrations of 0 μM, 1 μM, 2 μM and 10 μM were tested with background electrolyte concentrations of 0.028 M NaCl (1000 mg/L Cl^-) or 0.028 M NaClO₄. Palladium release increased with FC concentration, ranging from 0.014 ± 0.002 μM Pd without FC to 5.013 ± 0.002 μM Pd at 10 μM FC. At 0 μM, 1 μM and 2 μM FC, chloride induced further Pd release, but had no effect at 10 μM FC. PHREEQC modeling predicted that the predominant species present in equilibrium with Pd(OH)₂(s) were Pd(OH)₂⁰ and Pd(CN)₄^2-, and that PdCl_x^2-x complexes had only a minor effect on the total concentration of dissolved palladium. The effect of FC on Pd release was predicted but not the effect of Cl^-, indicating possible kinetic control. Platinum was measured above limits of detection (LODs) only at 10 μM FC, and rhodium levels were below LODs, consistent with their slower complexation kinetics.

Relationship between indoor and outdoor size-fractionated particulate matter in urban microenvironments: Levels, chemical composition and sources

Exposure to particulate matter (PM) has been associated with adverse health outcomes, particularly in susceptible population groups such as children. This study aims to characterise children's exposure to PM and its chemical constituents. Size-segregated aerosol samples (PM0.25, PM0.25-0.5, PM0.5-1.0, PM1.0-2.5 and PM2.5-10) were collected in the indoor and outdoor of homes and schools located in Lisbon (Portugal). Organic and elemental carbon (OC and EC) were determined by a thermo-optical method, whereas major and trace elements were analysed by X-Ray Fluorescence. In school, the children were exposed to higher PM concentrations than in home, which might be associated not only to the elevated human occupancy but also to outdoor infiltration. The pattern of PM mass size distribution was dependent on the location (home vs. school and indoor vs. outdoor). The presence of EC in PM0.25 and OC in PM0.25-0.5 was linked to traffic exhaust emissions. OC and EC in PM2.5-10 may be explained by their adhesion to the surface of coarser particles. Generally, the concentrations of mineral and marine elements increased with increasing PM size, while for anthropogenic elements happened the opposite. In schools, the concentrations of mineral matter, anthropogenic elements and marine aerosol were higher than in homes. High mineral matter concentrations found in schools were related to the close proximity to busy roads and elevated human occupancy. Overall, the results suggest that exposure to PM is relevant and highlights the need for strategies that provide healthier indoor environments, principally in schools.

A comparative study of the physiological and biochemical properties of tomato (Lycopersicon esculentum M.) and maize (Zea mays L.) under palladium stress

There is great concern about the environmental impact and toxicity of palladium (Pd) because of its widespread use in automotive catalytic converters and other applications. Pd migrates and transforms in the environment and is absorbed by plant roots where it affects plant growth and eventually enters the food chain. Here we explored the effects of Pd on the physicochemical and biochemical characteristics of C3 (tomato) and C4 (maize) plants. We measured physicochemical and biochemical properties, including chlorophyll, protein, soluble sugar, antioxidant enzymes, malondialdehyde, proline, and root activity, in tomato and maize seedlings after cultivation in different concentrations of PdCl₂ solution (0, 0.2, 0.5, and 1 mM) in order to observe how Pd stresses them. Results showed that, with increasing Pd concentration, chlorophyll a and chlorophyll b contents and root activity decreased. Meanwhile, malondialdehyde, proline, protein, and soluble sugar contents increased. After cultivation in 1 mM PdCl₂, the Pd contents in the roots, stems, and leaves of tomato seedlings were 12.389, 1.132, and 0.206 mg/g, respectively. In general, Pd has significant effects on the physiological and biochemical properties of both tomato and maize. Additionally, tomato seedlings were more sensitive to Pd stress, photosynthesis in maize was less inhibited by Pd and the antioxidant capability of maize was stronger. These results indicated that maize (C4 plant) exhibited a higher tolerance to Pd than tomato (C3 plant). Pd migration in tomato was observed and the translocation factor (TF) was calculated. The values of TF_stem/root, TF_leaf/root, TF_leaf/stem, and TF_shoot/root were 0.09, 0.02, 0.18, and 0.11 in tomato seedlings, respectively. Pd accumulated most in the roots, followed in turn by stems, leaves, and only trace amount of Pd was transferred into shoots.

The HR-CS-GF-AAS determination and preconcentration of palladium in contaminated urban areas, especially in lichens

The increasing content of platinum group metal particles emitted into the environment by car traffic is gradually attracting the attention of the scientific community. However, the methods for the determination of platinum group metals in environmental matrices are either costly or suffer from low sensitivity. To facilitate the use of less sensitive, but significantly cheaper, devices, the preconcentration of platinum group metals is employed. For platinum, a multitude of preconcentration approaches have been published. On the contrary, the preconcentration approaches for palladium are still rare. In this work, the development, optimization, and testing of a new approach is described; it is based on a preconcentration of palladium on octadecyl modified silica gel together with the complexing agent dimethylglyoxime, and it is then analyzed with the high-resolution continuum-source atomic absorption spectrometry. For comparison, a newly developed sorbent, QuadraSil™ TA, with a high affinity for platinum group metals was also tested. The preconcentraiton approach was tested on the lichen Hypogymnia physodes, which served as a bioindicator of palladium emissions. The case study site was a mid-sized city in central Europe: Brno, Czech Republic. The dry "bag" monitoring technique was used to collect the palladium near roads with a large span of traffic density. The developed analytical approach confirmed an increasing concentration of palladium with increasing exposure time and intensity of the traffic. Consequently, a simple relationship between the amount of bioaccumulated palladium and traffic density was established.

Small-sized platinum nanoparticles in soil organic matter: Influence on water holding capacity, evaporation and structural rigidity

Engineered and anthropogenic nanoparticles represent a new type of pollutants. Up until now, many studies have reported its adverse effect on biota, but the potential influence on the properties and functions of environmental compartments has largely been ignored. In this work, the effect of Pt nanoparticles on the functions and properties of model soil organic matter has been studied. Using differential scanning calorimetry and molecular modeling, the effect of a wide range of 3 nm Pt nanoparticles concentrations on water holding capacity, the strength of water binding, the stability of water molecule bridges and the content of aliphatic crystallites was studied. It was found that strong hydration of the nanoparticles influences the 3D water structural network and acts as kosmotropic agents (structure-forming) in water bridges and as chaotropic agents (i.e. water destructuring) in larger water volumes. Contrarily, the interaction with soil organic matter moieties partially eliminates these effects. As a result, the 3 nm Pt nanoparticles decreased the evaporation enthalpy of water in soil organic matter and supported soil desiccation. They also increased the strength of water molecule bridges and increased the soil structural rigidity even at low concentrations. Additionally, at high concentrations, they decreased the water content in soil organic matter and induced the aliphatic moieties' crystallization. It is concluded that the small-sized Pt nanoparticles, and perhaps other types as well, may affect the local physicochemical processes in soils and may consequently contribute to enhanced evapotranspiration and deterioration of soil functions.

Airborne, Vehicle-Derived Fe-Bearing Nanoparticles in the Urban Environment: A Review

Airborne particulate matter poses a serious threat to human health. Exposure to nanosized (<0.1 μm), vehicle-derived particulates may be hazardous due to their bioreactivity, their ability to penetrate every organ, including the brain, and their abundance in the urban atmosphere. Fe-bearing nanoparticles (<0.1 μm) in urban environments may be especially important because of their pathogenicity and possible association with neurodegenerative diseases, such as Alzheimer's and Parkinson's diseases. This review examines current knowledge regarding the sources of vehicle-derived Fe-bearing nanoparticles, their chemical and mineralogical compositions, grain size distribution and potential hazard to human health. We focus on data reported for the following sources of Fe-bearing nanoparticles: exhaust emissions (both diesel and gasoline), brake wear, tire and road surface wear, resuspension of roadside dust, underground, train and tram emissions, and aircraft and shipping emissions. We identify limitations and gaps in existing knowledge as well as future challenges and perspectives for studies of airborne Fe-bearing nanoparticles.

Platinum and rhodium in Tagus estuary, SW Europe: sources and spatial distribution

The spatial distribution of Pt and Rh was assessed in Tagus estuary and their sources discussed. Both elements were analysed in superficial sediment samples (n = 72) by adsorptive cathodic stripping voltammetry. Concentrations varied within the following ranges: 0.18-5.1 ng Pt g^-1 and 0.02-1.5 ng Rh g^-1. Four distinct areas were established: "reference"; waste- and pluvial water discharge; motorway bridges and industrialised areas. The calculated reference median concentrations were 0.55 ng Pt g^-1 and 0.27 ng Rh g^-1. Linear relationships were found between Pt and Al, Fe and LOI, whereas Rh depicted scattered patterns. The highest concentrations were found nearby industrialised areas and a motorway bridge, corresponding to the enrichment of 10 and 6 times the background of Pt and Rh, respectively. The main sources of contamination to the Tagus estuary derived from historical and present industrial activities and from automotive catalytic converters. Large variations of Pt/Rh ratio (0.48-39) point to different sources, reactivity and dilution effects.

Physicochemical characterization and sources of the thoracic fraction of road dust in a Latin American megacity

Road dust has been identified as one of the main sources of outdoor PM₁₀ in Bogota (a Latin American megacity), but there are no studies that have analyzed the physicochemical characteristics and origins of its respirable fraction. A characterization of inorganic compounds (water soluble ions, major and trace elements, organic and elemental carbon) and an analysis of source contributions to the PM₁₀ fraction of road dust were carried out in this study. A total of twenty road dust samples, selected from representative industrial, residential and commercial areas, were swept and resuspended to obtain the thoracic fraction. Size distribution by laser diffraction and individual particle morphology by Scanning Electron Microscopy were also evaluated. The data obtained revealed that the volume (%) of thoracic particles was higher in samples from industrial zones where heavy vehicular traffic, industrial emissions and deteriorated pavements predominated. Crustal elements were the most abundant species, accounting for 49-62% of the thoracic mass, followed by OC (13-29%), water-soluble ions (1.4-3.8%), EC (0.8-1.9%) and trace elements (0.2-0.5%). The Coefficient of Divergence was obtained to identify the spatial variability of the samples. A source apportionment analysis was carried out considering the variability of chemical profiles, enrichment factors and ratios of Fe/Al, K/Al, Ca/Al, Ti/Al, Cu/Sb, Zn/Sb, OC/TC and OC/EC. By means of a PCA analysis, five components were identified, including local soils and pavement erosion (63%), construction and demolition activities (13%), industrial emissions (6%), brake wear (5%) and tailpipe emissions (4%). These components accounted for 91% of the total variance. The results provide data to understand better one of the main sources of PM₁₀ emissions in Bogota, such as road dust. These data will be useful to optimize environmental policies, and they may be used in future studies of human health and air quality modeling.

Enhanced release of palladium and platinum from catalytic converter materials exposed to ammonia and chloride bearing solutions

The environmental levels of platinum group elements (PGEs) are steadily rising, primarily due to exhaust emissions of vehicle catalytic converter (VCC) materials containing solid PGEs. Once these VCC materials reach soil and water, the PGEs may be transported in the form of nanoparticles (dimensions 1-100 nm) or they may be mobilized by forming coordination complexes with ligands in the environment. Chloride (Cl-) and ammonia (NH3) are two ligands of particular concern due to their ubiquity as well as their potential to form the chemotherapy drug cisplatin (Pt(NH3)2Cl2) or other potentially bioactive complexes. This initial study examines the release of Pd and Pt into solutions exposed to VCC materials at pH 8 and 25 °C, using elemental analysis of metal content in post-exposure extracts. The solutions had total ammonia nitrogen concentrations (TAN, [NH4+] + [NH3]) of 0 μM, 5.56 μM, 55.6 μM and 1.13 × 105 μM (0 ppm, 0.1 ppm, 1 ppm, and 2147 ppm). The former three represent background environmental levels had a minimal effect on release. However, when combined with 1.13 × 105 μM Cl- (4000 ppm Cl-), 55.6 μM TAN induced a marked increase in metal release (∼41× for Pd). High TAN solutions induced more Pd and Pt release than equimolar NaCl solutions. Materials characterization revealed that ∼4 nm palladium-containing nanoparticles were present, spatially associated with nanoparticles of γ-Al2O3; ceria-zirconia nanoparticles were also present but did not have any metal associated with them. Platinum-containing nanoparticles were not observed.

Using chromate to investigate the impact of mineral-organic contact time on the surface reactivity of goethite

Chromate was used as a chemical probe to investigate the impact of mineral-organic contact time on the surface reactivity of two different sizes of goethite particles. A series of goethite-chromate sorption batch reactions were conducted in the presence and absence of Suwannee River humic acid (HA) and natural organic matter (NOM) using nano- and micro-scale goethite particles. In experiments with added organics the amount of time allowed for goethite-organic matter interaction (i.e. contact time) was varied from less than 1 minute, up to 24 hours prior to the addition of chromate. Results indicated that nano- and micro-scale goethite in the absence of organics sorbed nearly identical amounts of chromate on a per mass basis, despite the greater surface area of the smaller particles. Results also indicated that the presence of ∼10 mg L-1 of HA and a contact time of less than 1 minute reduced the amount of chromate sorbed by both nano- and micro-scale goethite. Increasing the contact time resulted in greater decreases in chromate sorption. Experiments using NOM produced similar results. While chromate sorption was most rapid during the first hour of the experiments, goethite particles continued to sorb additional chromate over a period of up to 7 days. Additionally, a noticeable impact on chromate sorption due to increased contact time was present over that time period.

An assessment of the inhalation bioaccessibility of platinum group elements in road dust using a simulated lung fluid

Metal enrichment of road dust is well characterized but available data on the bioaccessibility of metals in particle size fractions relevant to human respiratory health remain limited. The study goal was to investigate the bioaccessibility of platinum group elements (PGE), which are used as catalysts in automotive exhaust converters, in the inhalable fraction of road dust. Street sweepings were provided by the City of Toronto, Canada, collected as part of its Clean Roads to Clean Air program.The particle size relevance of road dust for inhalation exposures was confirmed using a laser diffraction particle size analyzer (mean Dx(50): 9.42 μm). Total PGE were determined in both bulk and inhalable fractions using nickel sulfide (NiS) fire-assay and instrumental neutron-activation analysis (INAA). PGE lung solubility was examined for the inhalable fraction using Gamble's extraction. Sample digests were co-precipitated with Te-Sn, to pre-concentrate and isolate PGE, prior to their measurement using inductively coupled plasma mass spectrometry (ICP-MS).Total PGE concentrations were enriched in the inhalable fraction of road sweepings. Geomean concentrations in the inhalable fraction were: palladium (Pd) (152 μg/kg), platinum (Pt) (55 μg/kg), rhodium (Rh) (21 μg/kg) and iridium (Ir) (0.23 μg/kg). Osmium (Os) concentrations were below the limit of detection (LOD). Bioaccessible PGEs (n = 16) using Gamble's solution were below LOD for Ir and ruthenium (Ru). For the remainder, the geomean % bioaccessibility was highest for platinum (16%), followed by rhodium (14%) and palladium (3.4%). This study provides evidence that PGE in road dust are bioaccessible in the human lung.

Biorefining of platinum group metals from model waste solutions into catalytically active bimetallic nanoparticles

Bacteria can fabricate platinum group metal (PGM) catalysts cheaply, a key consideration of industrial processes and waste decontaminations. Biorecovery of PGMs from wastes is promising but PGM leachates made from metallic scraps are acidic. A two-step biosynthesis 'pre-seeds' metallic deposits onto bacterial cells benignly; chemical reduction of subsequent metal from acidic solution via the seeds makes bioscaffolded nanoparticles (NPs). Cells of Escherichia coli were seeded using Pd(II) or Pt(IV) and exposed to a mixed Pd(II)/Pt(IV) model solution under H2 to make bimetallic catalyst. Its catalytic activity was assessed in the reduction of Cr(VI), with 2 wt% or 5 wt% preloading of Pd giving the best catalytic activity, while 1 wt% seeds gave a poorer catalyst. Use of Pt seeds gave less effective catalyst in the final bimetallic catalyst, attributed to fewer and larger initial seeds as shown by electron microscopy, which also showed a different pattern of Pd and Pt deposition. Bimetallic catalyst (using cells preloaded with 2 wt% Pd) was used in the hydrogenation of soybean oil which was enhanced by ~fourfold using the bimetallic catalyst made from a model waste solution as compared to 2 wt% Pd preloaded cells alone, with a similar selectivity to cis C18:1 product as found using a Pd-Al2 O3 commercial catalyst.

Study of the uptake and bioaccumulation of palladium nanoparticles by Sinapis alba using single particle ICP-MS

In recent years, increased palladium content has been found in the environment, due to its wide use in various fields, especially as catalytic converters. Palladium can be emitted as a range of soluble and insoluble compounds and in the form of palladium nanoparticles (PdNPs). The level of toxicity is equally dependent on concentration and form of palladium and hence, it is important to determine not only the total content of this element, but also its forms of occurrence. This study for the first time investigates the uptake degree and distribution of PdNPs by model plant Sinapis alba, in comparison with a platinum salt (Pd(NO₃)₂). An enzymatic digestion method which allows the extraction of PdNPs from the different plant tissues without altering their properties was applied. After extraction, samples were analysed by single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) to provide information about the presences of palladium in nanoparticulated or dissolved form, the nanoparticle size and the nanoparticle number concentration. Significant amounts of PdNPs were found even in aboveground organs, but no significant changes in plant morphology were observed. Size distributions of PdNPs found in all tissues presented lower diameters than size distribution of the PdNPs stock suspension, suggesting that bigger nanoparticles are not taken up by the plant. The average size found is in good agreement between the different organs. Moreover, dissolved palladium was found in all samples, with the biggest contribution, in relative terms, observed in leaves followed by stems and roots.

Nanoparticles in the environment: where do we come from, where do we go to?

Nanoparticles serve various industrial and domestic purposes which is reflected in their steadily increasing production volume. This economic success comes along with their presence in the environment and the risk of potentially adverse effects in natural systems. Over the last decade, substantial progress regarding the understanding of sources, fate, and effects of nanoparticles has been made. Predictions of environmental concentrations based on modelling approaches could recently be confirmed by measured concentrations in the field. Nonetheless, analytical techniques are, as covered elsewhere, still under development to more efficiently and reliably characterize and quantify nanoparticles, as well as to detect them in complex environmental matrixes. Simultaneously, the effects of nanoparticles on aquatic and terrestrial systems have received increasing attention. While the debate on the relevance of nanoparticle-released metal ions for their toxicity is still ongoing, it is a re-occurring phenomenon that inert nanoparticles are able to interact with biota through physical pathways such as biological surface coating. This among others interferes with the growth and behaviour of exposed organisms. Moreover, co-occurring contaminants interact with nanoparticles. There is multiple evidence suggesting nanoparticles as a sink for organic and inorganic co-contaminants. On the other hand, in the presence of nanoparticles, repeatedly an elevated effect on the test species induced by the co-contaminants has been reported. In this paper, we highlight recent achievements in the field of nano-ecotoxicology in both aquatic and terrestrial systems but also refer to substantial gaps that require further attention in the future.

Pollution Control Meets Sustainability: Structure-Activity Studies on New Iron Oxide-Based CO Oxidation Catalysts

A new class of catalysts for the oxidation of CO based on iron oxide as a biocompatible, earth-abundant and non-toxic metal is presented. The catalytic activities achieved with these catalysts provide promising milestones towards the substitution of noble metals in CO oxidation catalysts. The catalysts can be obtained by using iron core-shell nanoparticle precursors. The metal used for the shell material determines whether the iron core is integrated in or isolated from the support. The active iron site is effectively integrated into the γ-Al2 O3 support if an aluminum shell is present in the core-shell precursor. When the metal used for the shell is different from the support, an isolated structure is formed. Using this directed synthesis approach, different iron oxide species can be obtained and their structural differences are linked to distinct catalytic activities, as demonstrated by combined in-depth analytical studies using XRD, X-ray absorption spectroscopy (XAS), UV/Vis, and Brunauer-Emmett-Teller (BET) analysis. The key species responsible for high catalytic activity is identified as isolated tetrahedrally coordinated Fe(III) centers, whereas aggregation leads to a reduction in activity.

Outdoor urban nanomaterials: The emergence of a new, integrated, and critical field of study

Engineered nanomaterials (ENMs) are currently widely incorporated in the outdoor urban environmental fabric and numerous new applications and products containing ENMs are expected in the future. As has been shown repeatedly, products containing ENMs have the potential, at some point in their lifetime, to release ENMs into their surrounding environment. However, the expanding body in environmental nanomaterial research has not yet shifted toward ENMs in the context of the complex outdoor urban environment. This is especially surprising because the world's human populations are on a steady march toward more and more urbanization and technological development, accompanied with increased applications for ENMs in the outdoor urban environment. Our objective for this paper is therefore to review, assess, and provide new information in this emerging field. We provide an overview of nanomaterials (NMs, encompassing both ENMs and incidental nanomaterials, INMs) that are likely to be released in the urban environment from outdoor sources by discussing 1) the applications of ENMs that may lead to release of ENMs in urban areas, 2) the recently published data on the release of ENMs from novel nano-enabled applications in the outdoor urban environment, 3) the available literature on the occurrence of INMs in the atmosphere and within/on dust particles, and 4) the potential pathways and fate of NMs in the outdoor urban environment. This review is then followed by three case studies demonstrating the importance of NMs in the outdoor urban environment. The first and second case studies illustrate the occurrence of NMs in urban dust and stormwater ponds, respectively, whereas the third case study discusses the lessons learned from the release of NMs (e.g. Pt, ph and Rh) from automotive vehicle catalytic convertors. This article ends with a discussion of the research priorities needed to advance this emerging field of "outdoor urban nanomaterials" and to assess the potential risks of NMs in the context of urban environments.

Speciation Analysis of Labile and Total Silver(I) in Nanosilver Dispersions and Environmental Waters by Hollow Fiber Supported Liquid Membrane Extraction

Hollow fiber supported liquid membrane (HFSLM) extraction was coupled with ICP-MS for speciation analysis of labile Ag(I) and total Ag(I) in dispersions of silver nanoparticles (AgNPs) and environmental waters. Ag(I) in aqueous samples was extracted into the HFSLM of 5%(m/v) tri-n-octylphosphine oxide in n-undecane, and stripped in the acceptor of 10 mM Na2S2O3 and 1 mM Cu(NO3)2 prepared in 5 mM NaH2PO4-Na2HPO4 buffer (pH 7.5). Negligible depletion and exhaustive extraction were conducted under static and 250 rpm shaking to extract the labile Ag(I) and total Ag(I), respectively. The extraction equilibration was reached in 8 h for both extraction modes. The extraction efficiency and detection limit were (2.97 ± 0.25)% and 0.1 μg/L for labile Ag(I), and (82.3 ± 2.0)% and 0.5 μg/L for total Ag(I) detection, respectively. The proposed method was applied to determine labile Ag(I) and total Ag(I) in different sized AgNP dispersions and real environmental waters, with spiked recoveries of total Ag(I) in the range of 74.0-98.1%. With the capability of distinguishing labile and total Ag(I), our method offers a new approach for evaluating the bioavailability and understanding the fate and toxicity of AgNPs in aquatic systems.

The metallobiochemistry of ultratrace levels of platinum group elements in the rat

The use of platinum, palladium and rhodium (Platinum Group Elements - PGEs) and the possibility of exposure to their ultratrace levels is increasing. In fact, the exponential development of metallic PGE-based nanoparticles (<100 nm in size) opens extraordinary perspectives in the areas of electrocatalysts and catalytic converters, magnetic nanopowders, polymer membranes, cancer therapy, coatings, plastics, nanofibres and textiles. Like other metal-based nanoparticles, exposure to PGEs nanoparticles may result in a release of ultratrace amounts of Pt, Pd, Rh ions in the body whose metabolic fate and toxicity still need to be evaluated. Furthermore, PGEs can act as allergic sensitizers by acting as haptens and inducing both type I and IV allergic reactions. In this work we studied the in vivo metabolic patterns of ultratrace levels of potent allergens and sensitizers PGE halogenated salts. (191)Pt, (103)Pd and (101m)Rh radioisotopes were prepared via cyclotron irradiation and used for radiolabelling Na2(191)PtCl4, Na2(103)PdCl4 and Na2(101m)RhCl6 salts. These anionic chlorocomplexes were intraperitoneally injected into rats (114 ng Pt kg(-1) bodyweight; 24 ng Pd kg(-1) b.w.; 16 ng Rh kg(-1) b.w.). At 16 h post-exposure, PGEs were poorly but significantly retained in all tissues analysed. Kidneys, spleen, adrenal gland, liver, pancreas and small intestine were the organs with the highest Pt, Pd, Rh concentrations. In the blood 30-35% of (103)Pd and (191)Pt and 10% of (101m)Rh were recovered in the plasma, mainly bound to albumin and to a less extent to transferrin. The hepatic and renal intracellular distribution showed the highest recovery of (191)Pt, (103)Pd and (101m)Rh in the nuclear fraction (liver) and in the cytosol (kidney). Chromatographic separation and ultrafiltration experiments on kidney and liver cytosols showed the strong ability of biochemical macromolecules to bind (191)Pt, (103)Pd and (101m)Rh, and being responsible for the retention of the three elements in the body. The link to macromolecules is the basis for the sensitizing capacity of PGEs.

The PM10 fraction of road dust in the UK and India: Characterization, source profiles and oxidative potential

Most studies of road dust composition have sampled a very wide range of particle sizes, but from the perspective of respiratory exposure to resuspended dusts, it is the PM10 fraction which is of most importance. The PM10 fraction of road dust samples was collected at two sites in Birmingham, UK (major highway and road tunnel) and one site in New Delhi, India. Dust loadings were found to be much higher for New Delhi compared to Birmingham, while concentrations of several species were much higher in the case of Birmingham. Detailed chemical source profiles were prepared for both cities and previously generated empirical factors for source attribution to brake wear, tyre wear, and crustal dust were successfully applied to the UK sites. However, 100% of the mass for the Indian site could not be accounted for using these factors. This study highlights the need for generation of local empirical estimation factors for non-exhaust vehicle emissions. A limited number of bulk road dust and brake pad samples were also characterized. Oxidative potential (OP) was also determined for a limited number of PM10 and bulk road dust samples, and Cu was found to be a factor significantly associated with OP in PM10 and bulk road dust.

Osmium and Platinum Decoupling in the Environment: Evidences in Intertidal Sediments (Tagus Estuary, SW Europe)

Catalytic converters in automobiles have significantly increased the input of platinum group elements (PGE) to the environment, and their coupled geochemical behavior has been proposed. To check this hypothesis, Pt and Os concentrations and (187)Os/(188)Os ratios were determined in sediment cores and interstitial waters from the Tagus Estuary (SW Europe) affected by different traffic pressure. Platinum concentration in surface sediments nearby the high traffic zone (up to 40 ng g(-1)) indicated severe contamination. Although lower than Pt, Os enrichment was also observed in surface sediments, with lower (187)Os/(188)Os ratios than in deeper layers. Dissolved Pt and Os in interstitial waters, 0.1-0.7 pg g(-1) and 0.03-0.10 pg g(-1), respectively, were higher than in typical uncontaminated waters. Results indicate two sources of Pt and Os into the Tagus Estuary salt marshes: a regional input associated with industrial activities, fossil fuel combustions, and regional traffic and a local source linked to nearby traffic density emissions. Estimations of Os and Pt released by catalytic converters support this two-source model. Differences in geochemical reactivity and range of dispersion from their sources lead to a decoupled behavior of Os and Pt, questioning the use of Os isotopes as proxies of PGE sources to the environment.

Palladium nanoparticles induce disturbances in cell cycle entry and progression of peripheral blood mononuclear cells: paramount role of ions

There is concern about the possible toxicity of palladium nanoparticles (Pd-NP), as they are released in the environment through many applications. We previously studied the toxicity of Pd-NP at high concentrations; here we address the possible toxicity of Pd-NP at low, subtoxic doses. In particular, we have exposed normal human PBMC entering into the first in vitro mitotic division to Pd-NP and to Pd(IV) ions to evaluate ROS generation and cell cycle progression. We have measured a statistically significant increase of intracellular ROS in Pd(IV) exposed cells, but not in Pd-NP exposed cells. TEM revealed accumulation of lipid droplets and autophagic and mitophagic vacuoles, which appeared more conspicuous in cells exposed to Pd(IV) ions than to Pd-NP. Pd-NP were visible in the cytoplasm of Pd-NP exposed cells. Pd-NP addition was associated with a significant increase of cells within the G0/G1-phase and a significant reduction in GS- and G2/M-phases. Cells exposed to Pd(IV) ions showed a significant amplification of these cell cycle alterations. These results suggest that ions, per se or released by NPs, are the true inducers of Pd toxicity. It will be essential to verify whether the observed disturbance represents a temporary response or might result in permanent alterations.

Local structure and speciation of platinum in fresh and road-aged North American sourced vehicle emissions catalysts: an X-ray absorption spectroscopic study

Given emerging concerns about the bioavailability and toxicity of anthropogenic platinum compounds emitted into the environment from sources including vehicle emission catalysts (VEC), the platinum species present in selected North American sourced fresh and road-aged VEC were determined by Pt and Cl X-ray absorption spectroscopy. Detailed analysis of the Extended X-ray Absorption Fine Structure at the Pt L3 and L2 edges of the solid phase catalysts revealed mainly oxidic species in the fresh catalysts and metallic components dominant in the road-aged catalysts. In addition, some bimetallic components (Pt-Ni, Pt-Pd, Pt-Rh) were observed in the road-aged catalysts from supporting Ni-, Pd-, and Rh-K edge XAS studies. These detailed analyses allow for the significant conclusion that this study did not find any evidence for the presence of chloroplatinate species in the investigated solid phase of a Three Way Catalyst or Diesel Oxidation Catalysts.

A naked-eye and ratiometric near-infrared probe for palladium via modulation of a π-conjugated system of cyanines

The modulation of π-conjugated electrons in cyanine dyes can result in a ratiometric fluorescence change with a large Stokes shift (270 nm), especially for realizing palladium detection in aqueous samples using indicator paper and in living cells by ratiometric mode.

Elemental characterization of PM2.5 and PM10 emitted from light duty vehicles in the Washburn Tunnel of Houston, Texas: release of rhodium, palladium, and platinum

We report the elemental composition, including Rh, Pd, and Pt, of total (i.e., tailpipe and nontailpipe) PM2.5 and PM10 emissions from predominantly gasoline-driven light-duty vehicles (LDVs) traversing the Washburn Tunnel in Houston, Texas during November and December, 2012. Using a novel sample preparation and dynamic reaction cell-quadrupole-inductively coupled plasma-mass spectrometry technique, we quantify the emission of numerous representative, transition, and lanthanoid elements. Two sets of time integrated PM samples were collected over 3-4week duration both inside the tunnel as well as from the tunnel ventilation air supply to derive accurate LDV source profiles incorporating three platinum group elements (PGEs) for the first time. Average Rh, Pd, and Pt concentrations from the tunnel ventilation air supply were 1.5, 11.1, and 4.5pgm(-3) in PM2.5 and 3.8, 23.1, and 15.1pgm(-3) in PM10, respectively. Rh, Pd, and Pt levels were elevated inside the Washburn Tunnel reaching 12.5, 91.1, and 30.1pgm(-3) in PM2.5 and 36.3, 214, and 61.1pgm(-3) in PM10, respectively. Significantly higher enrichment factors of Cu, Zr, Rh, Pd, Sb, and Pt (referenced to Ti in the upper continental crust) inside the tunnel compared with the ventilation air supply suggested that they are unique elemental tracers of PM derived from gasoline-driven LDVs. This highlights the importance of advancing methods to quantify the trace level PGE emissions as a technique to more accurately estimate LDVs' contributions to airborne PM. Using the emission profile based on PGEs and ambient quantification, mass balancing revealed that approximately half the fine PM mass in the tunnel could be attributed to tailpipe emissions, approximately one-quarter to road dust, with smaller contributions from brake (7%) and tire (3%) wear. On the other hand, PM10 mostly originated from resuspended road dust (∼50%), with progressively lower contributions from tailpipe emissions (14%), brake wear (9%), and tire wear (2%).