Detect, remove and reuse: a new paradigm in sensing and removal of Hg (II) from wastewater via SERS-active ZnO/Ag nanoarrays

Surface-Enhanced Raman Spectroscopy and Electrochemistry: The Ultimate Chemical Sensing and Manipulation Combination

One of the lessons we learned from the COVID-19 pandemic is that the need for ultrasensitive detection systems is now more critical than ever. While sensors' sensitivity, portability, selectivity, and low cost are crucial, new ways to couple synergistic methods enable the highest performance levels. This review article critically discusses the synergetic combinations of optical and electrochemical methods. We also discuss three key application fields-energy, biomedicine, and environment. Finally, we selected the most promising approaches and examples, the open challenges in sensing, and ways to overcome them. We expect this work to set a clear reference for developing and understanding strategies, pros and cons of different combinations of electrochemical and optical sensors integrated into a single device.

Highly selective detection and removal of mercury ions in the aquatic environment based on magnetic ZIF-71 multifunctional composites with sufficient chlorine functional groups

The development of both detection and removal technologies for heavy metal ions is of great importance. Most of the existing adsorbents that contain oxygen, nitrogen or sulfur functional groups can remove heavy metals, but achieving both selective detection and removal of a single metal ion is difficult because they bind to a wide range of heavy metal ions. Herein, we selected zeolite imidazolium hydrochloride framework-71 (ZIF-71) with sufficient chlorine functional groups to fabricate magnetic ZIF-71 multifunctional composites (M-ZIF-71). M-ZIF-71 had a large specific surface area, excellent water stability, and good magnetic properties, which made M-ZIF-71 conducive to the separation and recovery of adsorbents and the assembly of electrodes. M-ZIF-71 exhibited high selectivity, wide linear range (1-500 μg/L), and low detection limit (0.32 μg/L) for electrochemical detection of mercury ions (Hg2+). Meanwhile, M-ZIF-71 demonstrated rapid Hg2+ adsorption with a high capacity of 571.2 mg/g and excellent recyclability. The high selectivity for Hg2+ was attributed to the powerful affinity of highly electronegative chlorine and Hg2+. Moreover, XPS spectra demonstrated the interaction between chlorine and Hg2+. This work provides a new inspiration for applications in the targeted monitoring and removal of heavy metal pollution.

Surface modification of quartz sand: A review of its progress and its effect on heavy metal adsorption

Quartz sand (SiO₂) is a prevalent filtration medium, boasting wide accessibility, superior stability, and cost-effectiveness. However, its utility is often curtailed by its sleek surface, limited active sites, and swift saturation of adsorption sites. This review outlines the prevalent strategies and agents for quartz sand surface modification and provides a comprehensive analysis of the various modification reagents and their operative mechanisms. It delves into the mechanism and utility of surface-modified quartz sand for adsorbing heavy metal ions (HMIs). It is found that the reported modifiers usually form connections with the surface of quartz sand through electrostatic forces, van der Waals forces, pore filling, chemical bonding, and/or molecular entanglement. The literature suggests that these modifications effectively address issues inherent to natural quartz sand, such as its low superficial coarseness, rapid adsorption site saturation, and limited adsorption capacity. Regrettably, comprehensive investigations into the particle size, regenerative capabilities, and application costs of surface-modified quartz sand and the critical factors for its wider adoption are lacking in most reports. The adsorption mechanisms indicate that surface-modified quartz sand primarily removes HMIs from aqueous solutions through surface complexation, ion exchange, and electrostatic and gravitational forces. However, these findings were derived under controlled laboratory conditions, and practical applications for treating real wastewater necessitate overcoming further laboratory-scale obstacles. Finally, this review outlines the limitations of partially surface modified quartz sand and suggests potential venues for future developments, providing a valuable reference for the advancement of cost-effective, HMI-absorbing, surface-modified quartz sand filter media.

Highly porous gold supraparticles as surface-enhanced Raman spectroscopy (SERS) substrates for sensitive detection of environmental contaminants

Surface-enhanced Raman spectroscopy (SERS) has great potential as an analytical technique for environmental analyses. In this study, we fabricated highly porous gold (Au) supraparticles (i.e., ∼100 μm diameter agglomerates of primary nano-sized particles) and evaluated their applicability as SERS substrates for the sensitive detection of environmental contaminants. Facile supraparticle fabrication was achieved by evaporating a droplet containing an Au and polystyrene (PS) nanoparticle mixture on a superamphiphobic nanofilament substrate. Porous Au supraparticles were obtained through the removal of the PS phase by calcination at 500 °C. The porosity of the Au supraparticles was readily adjusted by varying the volumetric ratios of Au and PS nanoparticles. Six environmental contaminants (malachite green isothiocyanate, rhodamine B, benzenethiol, atrazine, adenine, and gene segment) were successfully adsorbed to the porous Au supraparticles, and their distinct SERS spectra were obtained. The observed linear dependence of the characteristic Raman peak intensity for each environmental contaminant on its aqueous concentration reveals the quantitative SERS detection capability by porous Au supraparticles. The limit of detection (LOD) for the six environmental contaminants ranged from ∼10 nM to ∼10 μM, which depends on analyte affinity to the porous Au supraparticles and analyte intrinsic Raman cross-sections. The porous Au supraparticles enabled multiplex SERS detection and maintained comparable SERS detection sensitivity in wastewater influent. Overall, we envision that the Au supraparticles can potentially serve as practical and sensitive SERS devices for environmental analysis applications.

Biosynthesis of bifunctional silver nanoparticles for catalytic reduction of organic pollutants and optical monitoring of mercury (II) ions using their oxidase-mimic activity

In this study, an aqueous extract of Sclerocarya birrea leaves was used as a reducing agent to synthesize silver nanoparticles (AgNPs). The synthesis was carried out at room temperature and was both rapid and simple. Different characterization techniques such as UV/visible spectroscopy, surface-enhanced Raman spectroscopy, X-ray diffraction, and focused ion beam scanning electron microscopy were used to confirm the formation of AgNPs. The synthesized nanoparticles exhibited catalytic activity for the reduction of 4-nitrophenol, methyl orange, methylene blue, and rhodamine 6G. The catalytic activity was monitored by measuring the UV/visible absorbance spectra of the compounds using sodium borohydride as a reducing agent and found to be high. Additionally, the particles displayed oxidase-like activity. In the presence of AgNPs, 3, 3', 5, 5'-tetramethylbenzidine (TMB) which is colorless was transformed to oxidized TMB, which is blue, using dissolved oxygen as the oxidant. In the presence of Hg2+, the oxidase-like activity was enhanced. On the basis of this observation, an assay for the analysis of Hg2+ was developed. The linear range of the calibration curve is wide (0-600 µM) and the limit of detection (LOD) is low, as small as 34.8 nM. The method is strongly selective towards Hg2+. Tap water obtained from the laboratory where these experiments were carried out was used to study the feasibility of the method in real sample analyses.

A "bottle-around-ship" method to encapsulated carbon nitride and CdTe quantum dots in ZIF-8 as the dual emission fluorescent probe for detection of mercury (II) ion

A facile and efficient "bottle-around-ship" approach for preparing the ratiometric fluorescent probe has been developed by encapsulating the red-colored fluorescence CdTe quantum dots (QDs) and blue-colored fluorescence graphitic carbon nitride quantum dots (g-CNQDs) into the zeolitic imidazolate metal-organic frameworks (ZIF-8) in one step. At a single excitation of 360 nm, the obtained probe ZIF-8@g-CNQD/CdTe shows the dual-emission peaked at 450 and 633 nm, respectively. The red emission of CdTe QDs is selectively quenched by the Hg²⁺, whereas the blue fluorescence of g-CNQDs as an internal reference is insensitive, resulting in an apparent color transformation from pink to blue for special recognition of Hg²⁺. By this approach, the relative fluorescence intensity ratio (F₆₃₃/F₄₅₀) decreased linearly with increasing Hg²⁺ concentration in the 0.2-3.5 μM range with a low limit of detection (LOD) of ~ 46 nM. Therefore, we demonstrate that this "bottle-around-ship" process provides a new strategy for the construction of ratiometric fluorescent Hg²⁺ probes with good simplicity, high efficiency, and excellent stabilities. Moreover, the obtained Hg²⁺ fluorescent probe shows good results in the detection of actual samples.

High-Density-Nanotips-Composed 3D Hierarchical Au/CuS Hybrids for Sensitive, Signal-Reproducible, and Substrate-Recyclable SERS Detection

Surface-enhanced Raman scattering (SERS) provides an unprecedented opportunity for fingerprinting identification and trace-level detection in chemistry, biomedicine, materials, and so on. Although great efforts have been devoted to fabricating sensitive plasmonic nanomaterials, it is still challenging to batch-produce a SERS substrate with high sensitivity, good reproducibility, and perfect recyclability. Here, we describe a facile fabrication of three-dimensional (3D) hierarchical Au/CuS nanocomposites, in which high-density Au nanotips enable highly SERS-active sensing, and the well-defined microflower (MF) geometry produces perfect signal reproducibility (RSD < 5%) for large laser spot excitations (>50 μm2), which is particularly suitable for practical on-site detection with a handheld Raman spectrometer. In addition, a self-cleaning ability of this Au/CuS Schottky junction photocatalyst under sunlight irradiation allows complete removal of the adsorbed analytes, realizing perfect regeneration of the SERS substrates over many cycles. The mass-production, ultra-sensitive, high-reproducibility, and fast-recyclability features of hierarchical Au/CuS MFs greatly facilitate cost-effective and field SERS detection of trace analytes in practice.

Achieving Ultrasensitive Point-of-Care Assay for Mercury Ions with a Triple-Mode Strategy Based on the Mercury-Triggered Dual-Enzyme Mimetic Activities of Au/WO3 Hierarchical Hollow Nanoflowers

The exploration of new strategies for portable detection of mercury ions with high sensitivity and selectivity is of great value for biochemical and environmental analyses. Herein, a straightforward, convenient, label-free, and portable sensing platform based on a Au nanoparticle (NP)-decorated WO₃ hollow nanoflower was constructed for the sensitive and selective detection of Hg(II) with a pressure, temperature, and colorimetric triple-signal readout. The resulting Au/WO₃ hollow nanoflowers (Au/WO₃ HNFs) could efficaciously impede the aggregation of Au NPs, thus significantly improving their catalytic activity and stability. The sensing mechanism of this new strategy using pressure as a signal readout was based on the mercury-triggered catalase mimetic activity of Au/WO₃ HNFs. In the presence of the model analyte Hg(II), H₂O₂ in the detection system was decomposed to O₂ fleetly, resulting in a detectable pressure signal. Accordingly, the quantification of Hg(II) was facilely realized based on the pressure changes, and the detection limit could reach as low as 0.224 nM. In addition, colorimetric and photothermal detection of Hg(II) using the Au/WO₃ HNFs based on their mercury-stimulated peroxidase mimetic activity was also investigated, and the detection limits were calculated to be 78 nM and 0.22 μM for colorimetric and photothermal methods, respectively. Hence, this nanosensor can even achieve multimode determination of Hg(II) with the concept of point-of-care testing (POCT). Furthermore, the proposed multimode sensing platform also displayed satisfactory sensing performance for the Hg(II) assay in actual water samples. This promising strategy may provide novel insights on the fabrication of a multimode POCT platform for sensitive, selective, and accurate detection of heavy metal ions.

Evaluating the detection efficacy of advanced bimetallic plasmonic nanoparticles for heavy metals, hazardous materials and pesticides of leachate in contaminated groundwater

During the decomposition of trashes, leachate is created and leaching is gradually pollutes the surface and groundwater. Thus, the most severe ecological impact is the risk of ground water pollution because of collection of leachate from unlined insecure landfills. Due to the low biodegradable organic strength, irregular productivity and composition, the environmentally neglected landfill leachate treatment is challenging. This work was conducted on a synthetically effective bimetallic surface enhanced Raman spectroscopic (SERS) nanosensor by gold/silver-bimetallic nanoparticles (Au/Ag-NPs), and used for the specific detection of municipal solid waste (MSW) landfill leachate in groundwater. The optical study of Au/Ag-NPs led to reflections from Ag cores and small Au shells. The structural studies represent the FCC structure of Au/Ag-NPs. The core-shell nanocrevice NPs with particle size of 23 nm played an important role with plasmonic behaviour enhances the electromagnetic excitation to achieve SERS detection and plasmonic photocatalysis. Thus, obtained results clearly show that Au was successfully added to Ag-NPs, and its existence can also be confirmed by energy dispersive spectroscopy (EDAX). The prepared SERS based sensors have the potential to detect aromatic hydrocarbon, pesticides and heavy metals from environmentally ignored MSW landfill leachate. In general, the application of this new synergetic strategy of the photocatalytic degradation of leachate was irradiated by visible wavelength with the rate constant of 0.0036/min, 0.0047/min and 0.005/min by Ag-NPs, Au-NPs and Au/Ag-NPs respectively. Overall, this is the only study achieved efficiently with photocatalytic degradation and SERS detection of environmentally ignored real sample (leachate) to make pollutant free homeland aquifers.

Detection of trace mercury ions in water with a bovine-serum-albumin-modified Au@SiNWA surface-enhanced-Raman-scattering sensor

Accurate detection of mercury ions (Hg2+) in water is of great importance for environmental protection. Here, a surface-enhanced Raman scattering (SERS) sensor using bovine-serum-albumin-modified gold-silicon nanowire arrays (Au@SiNWAs) is used to detect the ions. The SiNWAs were grown via chemical etching; the addition of modified gold particles on the surface formed Au@SiNWAs to increase the surface activity. The Raman enhancement factor was as large as ∼2.52 × 105, which was also confirmed with finite-difference time-domain simulations. The detection limit for Hg2+ ions in water was as low as ∼10-12 M, which is much lower than that stipulated by the United States Environmental Protection Agency's maximum residue requirements for drinking water. Furthermore, the SERS intensity was linear with the log of the Hg2+ concentration between 1 pM and 100 nM, with a correlation coefficient of 0.992. There was no significant interference when other metal ions were present, which shows the excellent selectivity of the SERS sensor. Unknown Hg2+ concentrations in water can be readily determined in an accurate and reliable manner, with a relative standard deviation of ∼9.21%.

Silver nanoparticle on zinc oxide array for label-free detection of opioids through surface-enhanced raman spectroscopy

Opioid abuse is a significant public health problem. Over two million Americans have some form of addiction to opioids; however, despite governmental programs established to treat overdoses and restrict opioid distribution, there are still few screening tools that are quantitative, portable and easy to use for high-throughput mapping and monitoring this ongoing crisis. In this paper, we demonstrated a plasmonic zinc oxide (ZnO) arrays-on-silicon sensor for the label-free detection of opioids through surface-enhanced Raman spectroscopy (SERS), and evaluated the chips' opioid sensing performance. Specifically, we tested our device with oxycodone, a potent and commonly abused opioid, dissolved in methanol and blood serum as a proof-of-concept study. Ag particles were in situ patterned onto the ZnO array to form the completed sensing platform. The resulting Ag@ZnO arrays were characterized using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDS), and element mapping. In addition, the enhanced electric field induced by the localized surface plasmonic resonance at the Ag particle decorated ZnO is simulated using COMSOL. Opioid-containing samples at varying concentrations, from 900 μg mL-1 to 90 ng mL-1 were tested using SERS to characterize the chip's accuracy and sensitivity. We demonstrated that the sensor can reliably detect opioid concentrations as low as 90 ng mL-1 with great accuracy and sensitivity even spiked into blood serum. The chips could provide a cost-effective, high-throughput method for detecting opiate oxycodone, thereby providing a powerful tool to monitor and control the emerging public health threats.

Electrochemical Behaviour of Real-Time Sensor for Determination Mercury in Cosmetic Products Based on PANI/MWCNTs/AuNPs/ITO

Mercury is a common ingredient found in skin lightening soaps, creams, and makeup-cleansing products. It may cause skin rashes, skin discolouration, and scarring, as well as a reduction in the skin’s resistance to bacterial and fungal infections. By looking at this scenario, developing a sensor that involved a simple procedure and fasts for real-time detection without affecting mercury sensitivity is urgently needed. For that reason, a fast and sensitive electrochemical method was developed to determine mercury in cosmetic products with the composition of polyaniline/multi-walled carbon nanotubes/gold nanoparticles/indium tin oxide sheet using methylene blue as a redox indicator. The significantly enhanced electrochemical performance was observed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). In order to detect mercury qualitatively and quantitatively, deposition potential and deposition time were respectively optimised to be 0.10 V and 70 s. The modified sensor was revealed a wide detection range of mercury from 0.01 to 10.00 ppm with a limit of detection of 0.08 ppm. The modified sensor towards mercury with a correlation coefficient (r2) was of 0.9948. Multiple cycling, reproducibility, and consistency of different modified sensors were investigated to verify the modified sensor’s performance. The developed sensing platform was highly selective toward mercury among the pool of possible interferents, and the stability of the developed sensor was ensured for at least 21 days after 10 repeated uses. The proposed method is a fast and simple procedure technique for analysing the mercury levels in cosmetic products.

Remarkable SERS Detection by Hybrid Cu2O/Ag Nanospheres

Cu₂O nanospheres (NSs) were synthesized by modifying the glucose reduction method. Based on this method, Cu₂O/Au (Ag) NSs were further prepared by in situ reduction of HAuCl₄ (via electron beam evaporation of Ag). With Rhodamine 6G (R6G) as probe, the surface-enhanced Raman scattering (SERS) characteristics of the three samples were systematically studied. The experiment results showed that the enhancement factor (EF) of Cu₂O/Au (Ag) NSs as 1.25 × 10⁸ (2.74 × 10⁹) and the ultralow detection limit (LOD) as 8.07 × 10^-12 (1.13 × 10^-13) M for R6G. The excellent performance of SERS may be due to the charge transfer (CT) between metal-semiconductor (MS) molecules and the strong electromagnetic field (E-field) of each hot spot. In addition, discrete dipole approximation (DDA) simulations were performed to simulate the E-field enhancement of the Cu₂O and Cu₂O/Au (Ag) NSs in a three-dimensional (3D) configuration. These further supported that the high SERS performance for R6G is because of the powerful E-field coupling between neighboring Au (Ag) NPs and the surface plasmon resonance (SPR) effect. The Cu₂O/Ag NSs have potential in applications such as biomedicine, food safety, and environmental monitoring because of their high sensitivity and good reproducibility.

Colorimetric determination of Hg2+ based on the mercury-stimulated oxidase mimetic activity of Ag3PO4 microcubes

Four kinds of Ag₃PO₄ materials were prepared by controlling the experimental conditions, which were developed as oxidase mimics. Experimental results showed that different synthesis methods led to distinct crystal structures, morphologies, and surface properties, which contributed to diverse oxidase-like activities of Ag₃PO₄ materials. Among them, Ag₃PO₄ microcubes (APMCs) can efficiently catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine in the presence of dissolved oxygen to form a blue-colored oxide, presenting the best intrinsic oxidase mimetic ability. The higher-energy [110] facets with more oxygen vacancies exposed and more active sites coupled with more negative charge and larger specific surface area of APMCs contributed to its enhanced oxidase mimetic performance. Besides, mercury ions were proved to remarkably and selectively stimulate the oxidase-like ability of APMCs owing to the formation of Ag-Hg amalgam on its surface. Based on the stimulating effect of Hg²⁺ towards APMCs, a simple and rapid method for colorimetric determination of Hg²⁺ was thus established via the significant signal amplification and megascopic color variation. Under the optimal conditions, the sensing system showed a good linear relationship ranging from 0.1 to 7.0 μM and a detection limit of 20 nM for Hg²⁺, exhibiting high selectivity and good colour stability. Moreover, the colorimetric method was successfully applied to determine Hg²⁺ in real water samples. Considering these advantages, the developed colorimetric sensing system is expected to hold bright prospects for trace determination of Hg²⁺ in biological, environmental, and food samples. Graphical abstract The preparation process of Ag₃PO₄ materials and Hg²⁺-stimulated enhanced oxidase-like ability of Ag₃PO₄ microcubes in catalyzing the oxidation of TMB to generate a typical blue color, which can be applied in rapid and ultrasensitive detection of Hg²⁺ visually.

Surface Enhanced Raman Spectroscopy in environmental analysis, monitoring and assessment

Environmental pollution is usually monitored via mass spectrometry-based approaches. Such techniques are extremely sensitive but have several disadvantages. The instruments themselves are expensive, require specialized training to use and usually cannot be taken into the field. Samples also usually require extensive pre-treatment prior to analysis which can affect the final result. The development of analytical methods that matched the sensitively of mass spectrometry but that could be deployed in the field and require minimal sample processing would be highly advantageous for environmental monitoring. One method that may meet these criteria is Surface Enhanced Raman Spectroscopy (SERS). This is a surface-sensitive technique that enhances Raman scattering by molecules adsorbed on rough nanostructure surfaces such as gold or silver nanoparticles. SERS gives selective spectral enhancement such that increases in sensitivity of 10¹⁰ to 10¹⁴ have been reported. While this means SERS is, theoretically at least, capable of single molecule detection such a signal enhancement is hard to achieve in practice. In this review the background of SERS is introduced for the environmental scientist and the recent literature on the detection of several classes of environmental pollutants using this technique is discussed. For heavy metals the lowest limit of detection reported was 0.45 μg/L for Mercury; for pharmaceuticals, 2.4 μg/L for propranolol; for endocrine disruptors, 0.35 μg/L for 17β-estradiol; for perfluorinated compounds, 500 μg/L for perfluorooctanoic acid and for inorganic pollutants, 37g/L for general pesticide markers. The signal enhancements achieved in each case show great promise for the detection of pollutants at environmentally relevant concentrations and, although it does not yet routinely match the sensitivity of mass spectrometry. Further work to develop SERS methods and apply them for the detection of contaminants could be of wide benefit for environmental science.

Recent Progress in Surface-Enhanced Raman Scattering for the Detection of Chemical Contaminants in Water

Water is a matter of vital importance for all developed countries due to the strong impact on human health and aquatic, wetlands and terrestrial environments. Therefore, the monitoring of water quality is of tremendous importance. The enormous advantages that Surface-enhanced Raman scattering (SERS) spectroscopy offers, such as fingerprint recognition, multiplex capabilities, high sensitivity, and selectivity or non-destructive testing, make this analytical tool very attractive for this purpose. This minireview aims to provide a summary of current approaches for the implementation of SERS sensors in monitoring organic and inorganic pollutants in water. In addition, we briefly highlight current challenges and provide an outlook for the application of SERS in environmental monitoring.

Remediation of mercury contaminated soil, water, and air: A review of emerging materials and innovative technologies

Mercury contamination in soil, water and air is associated with potential toxicity to humans and ecosystems. Industrial activities such as coal combustion have led to increased mercury (Hg) concentrations in different environmental media. This review critically evaluates recent developments in technological approaches for the remediation of Hg contaminated soil, water and air, with a focus on emerging materials and innovative technologies. Extensive research on various nanomaterials, such as carbon nanotubes (CNTs), nanosheets and magnetic nanocomposites, for mercury removal are investigated. This paper also examines other emerging materials and their characteristics, including graphene, biochar, metal organic frameworks (MOFs), covalent organic frameworks (COFs), layered double hydroxides (LDHs) as well as other materials such as clay minerals and manganese oxides. Based on approaches including adsorption/desorption, oxidation/reduction and stabilization/containment, the performances of innovative technologies with the aid of these materials were examined. In addition, technologies involving organisms, such as phytoremediation, algae-based mercury removal, microbial reduction and constructed wetlands, were also reviewed, and the role of organisms, especially microorganisms, in these techniques are illustrated.

Facile synthesis of 3D flower-like mesoporous Ce-ZnO at room temperature for the sunlight-driven photocatalytic degradations of RhB and phenol

A 3D flower-like mesoporous Ce doped ZnO composite composed of nanosheets was prepared by a facile, one-step wet chemical method at room temperature. It was found that the moderate Ce doping can improve the light absorption of ZnO. The photocatalytic activities of the samples were studied by the degradation of Rhodamine B (RhB) and phenol under stimulated sunlight. The 1% mole ratio of Ce doped ZnO composites (denoted as CZ1) showed higher photocatalytic performance than other samples, where 85.1% of RhB and 69.6% of phenol can be removed within 125 min and 120 min, respectively. The Ce⁴⁺ doped in the lattice of ZnO can act as the electron trapping sites, which effectively improve the electron-hole separation. In addition, it was also found the annealing temperature had effect on the morphology and structure of Ce doped ZnO. The photocatalytic performance can be further enhanced at proper annealing temperature (500 °C) due to the increase of ZnO crystallinity with maintained flower-like structure and the formation of CeO₂-ZnO heterojunction at their tight interface promoting the separation of photogenerated electron-hole pairs.

Zinc Titanate Nanoarrays with Superior Optoelectrochemical Properties for Chemical Sensing

In this report, the gas sensing performance of zinc titanate (ZnTiO₃) nanoarrays (NAs) synthesized by coating hydrothermally formed zinc oxide (ZnO) NAs with TiO₂ using low-temperature chemical vapor deposition is presented. By controlling the annealing temperature, diffusion of ZnO into TiO₂ forms a mixed oxide of ZnTiO₃ NAs. The uniformity and the electrical properties of ZnTiO₃ NAs made them ideal for light-activated acetone gas sensing applications for which such materials are not well studied. The acetone sensing performance of the ZnTiO₃ NAs is tested by biasing the sensor with voltages from 0.1 to 9 V dc in an amperometric mode. An increase in the applied bias was found to increase the sensitivity of the device toward acetone under photoinduced and nonphotoinduced (dark) conditions. When illuminated with 365 nm UV light, the sensitivity was observed to increase by 3.4 times toward 12.5 ppm acetone at 350 °C with an applied bias of 9 V, as compared to dark conditions. The sensor was also observed to have significantly reduced the adsorption time, desorption time, and limit of detection (LoD) when excited by the light source. For example, LoD of the sensor in the dark and under UV light at 350 °C with a 9 V bias is found to be 80 and 10 ppb, respectively. The described approach also enabled acetone sensing at an operating temperature down to 45 °C with a repeatability of >99% and a LoD of 90 ppb when operated under light, thus indicating that the ZnTiO₃ NAs are a promising material for low concentration acetone gas sensing applications.

Polycyclic Aromatic Hydrocarbons (PAHs) in inland aquatic ecosystems: Perils and remedies through biosensors and bioremediation

Polycyclic Aromatic Hydrocarbons (PAHs) are among the most ubiquitous environmental pollutants of high global concern. PAHs belong to a diverse family of hydrocarbons with over one hundred compounds known, each containing at least two aromatic rings in their structure. Due to hydrophobic nature, PAHs tend to accumulate in the aquatic sediments, leading to bioaccumulation and elevated concentrations over time. In addition to their well-manifested mutagenic and carcinogenic effects in humans, they pose severe detrimental effects to aquatic life. The high eco-toxicity of PAHs has attracted a number of reviews, each dealing specifically with individual aspects of this global pollutant. However, efficient management of PAHs warrants a holistic approach that combines a thorough understanding of their physico-chemical properties, modes of environmental distribution and bioaccumulation, efficient detection, and bioremediation strategies. Currently, there is a lack of a comprehensive study that amalgamates all these aspects together. The current review, for the first time, overcomes this constraint, through providing a high level comprehensive understanding of the complexities faced during PAH management, while also recommending future directions through potentially viable solutions. Importantly, effective management of PAHs strongly relies upon reliable detection tools, which are currently non-existent, or at the very best inefficient, and therefore have a strong prospect of future development. Notably, the currently available biosensor technologies for PAH monitoring have not so far been compiled together, and therefore a significant focus of this article is on biosensor technologies that are critical for timely detection and efficient management of PAHs. This review is focussed on inland aquatic ecosystems with an emphasis on fish biodiversity, as fish remains a major source of food and livelihood for a large proportion of the global population. This thought provoking study is likely to instigate new collaborative approaches for protecting aquatic biodiversity from PAHs-induced eco-toxicity.

Ultrasensitive Au Nanooctahedron Micropinball Sensor for Mercury Ions

Mercury ion (Hg²⁺) is one of the most toxic heavy metals that has severe adverse effects on the environment and human organs even at very low concentrations. Therefore, highly sensitive and selective detection of Hg²⁺ is desirable. Here, we introduce plasmonic micropinball constructed from Au nanooctahedron as a three-dimensional surface-enhanced Raman spectroscopy (SERS) platform, enabling ultrasensitive detection of trace Hg²⁺ ions. Typically, strong SERS signals could be obtained when the single-stranded DNA structure converts to the hairpin structure in the presence of Hg²⁺ ions, due to the formation of thymine (T)-Hg²⁺-T. As a result, the detection limit of Hg²⁺ ions is as low as 1 × 10^-16 M, which is far below compared to that reported for conventional analytical strategies. Moreover, to achieve rapid multiple detection, we combine the micropinball sensors with microflow tube online detection. Our platform prevents cross-talk and tube contamination, allowing multiassay analysis, rapid identification, and quantification of different analytes and concentrations across separate phases.

Facile On-Site Aqueous Pollutant Monitoring Using a Flexible, Ultralight, and Robust Surface-Enhanced Raman Spectroscopy Substrate: Interface Self-Assembly of Au@Ag Nanocubes on a Polyvinyl Chloride Template

Aquatic ecosystems and human health have been seriously threatened by illegal discharge of wastewater, while simple and effective monitoring methods are still sparse. Here, we propose a facile method for on-site pollutant monitoring by surface-enhanced Raman spectroscopy with a novel substrate. This substrate is fabricated by interface self-assembly of Au@Ag nanocubes (NCs) on a simultaneously formed polyvinyl chloride (PVC) template, followed by coating with a thin Au film. The Au@Ag@Au-NCs/PVC film is flexible, ultralight, and robust and could float on the surface of water and firmly contact with water even under harsh environmental conditions. Moreover, the Au@Ag@Au-NCs/PVC film is translucent, allowing penetration of laser beams and enhancement of Raman signals. When thiram was used as a model contaminant in aqueous solution, a good linear relationship ( R² = 0.972) was obtained over the range of 0.1-50 ppb with a detection limit of 0.1 ppb. Raman signals of thiram can be instantly and consecutively detected with the enhancement of the film in the simulated experiments, suggesting its possible use in the long run. Furthermore, the film can be easily regenerated by NaBH₄ solution washing, which could reduce the operating cost. In summary, the Au@Ag@Au-NCs/PVC film has great potential in on-site pollutant monitoring in aqueous environments with a portable Raman spectrometer.

Oxygen-deficient photostable Cu2O for enhanced visible light photocatalytic activity

Oxygen vacancies in inorganic semiconductors play an important role in reducing electron-hole recombination, which may have important implications in photocatalysis. Cuprous oxide (Cu2O), a visible light active p-type semiconductor, is a promising photocatalyst. However, the synthesis of photostable Cu2O enriched with oxygen defects remains a challenge. We report a simple method for the gram-scale synthesis of highly photostable Cu2O nanoparticles by the hydrolysis of a Cu(i)-triethylamine [Cu(i)-TEA] complex at low temperature. The oxygen vacancies in these Cu2O nanoparticles led to a significant increase in the lifetimes of photogenerated charge carriers upon excitation with visible light. This, in combination with a suitable energy band structure, allowed Cu2O nanoparticles to exhibit outstanding photoactivity in visible light through the generation of electron-mediated hydroxyl (OH˙) radicals. This study highlights the significance of oxygen defects in enhancing the photocatalytic performance of promising semiconductor photocatalysts.

Nanostructured silver fabric as a free-standing NanoZyme for colorimetric detection of glucose in urine

Enzyme-mimicking catalytic nanoparticles, more commonly known as NanoZymes, have been at the forefront for the development of new sensing platforms for the detection of a range of molecules. Although solution-based NanoZymes have shown promise in glucose detection, the ability to immobilize NanoZymes on highly absorbent surfaces, particularly on free-standing substrates that can be feasibly exposed and removed from the reaction medium, can offer significant benefits for a range of biosensing and catalysis applications. This work, for the first time, shows the ability of Ag nanoparticles embedded within the 3D matrix of a cotton fabric to act as a free-standing peroxidase-mimic NanoZyme for the rapid detection of glucose in complex biological fluids such as urine. The use of cotton fabric as a template not only allows high number of catalytically active sites to participate in the enzyme-mimic catalytic reaction, the absorbent property of the cotton fibres also helps in rapid absorption of biological molecules such as glucose during the sensing event. This, in turn, brings the target molecule of interest in close proximity of the NanoZyme catalyst enabling accurate detection of glucose in urine. Additionally, the ability to extract the free-standing cotton fabric-supported NanoZyme following the reaction overcomes the issue of potential interference from colloidal nanoparticles during the assay. Based on these unique characteristics, nanostructured silver fabrics offer remarkable promise for the detection of glucose and other biomolecules in complex biological and environmental fluids.

Chemical Sensing Applications of ZnO Nanomaterials

Recent advancement in nanoscience and nanotechnology has witnessed numerous triumphs of zinc oxide (ZnO) nanomaterials due to their various exotic and multifunctional properties and wide applications. As a remarkable and functional material, ZnO has attracted extensive scientific and technological attention, as it combines different properties such as high specific surface area, biocompatibility, electrochemical activities, chemical and photochemical stability, high-electron communicating features, non-toxicity, ease of syntheses, and so on. Because of its various interesting properties, ZnO nanomaterials have been used for various applications ranging from electronics to optoelectronics, sensing to biomedical and environmental applications. Further, due to the high electrochemical activities and electron communication features, ZnO nanomaterials are considered as excellent candidates for electrochemical sensors. The present review meticulously introduces the current advancements of ZnO nanomaterial-based chemical sensors. Various operational factors such as the effect of size, morphologies, compositions and their respective working mechanisms along with the selectivity, sensitivity, detection limit, stability, etc., are discussed in this article.

Study on Surface-Enhanced Raman Scattering Substrate Based on Titanium Oxide Nanorods Coated with Gold Nanoparticles

A 3D surface-enhanced Raman scattering (SERS) substrate based on titanium oxide nanorods (TiOx-NRs) coated with gold nanoparticles (Au-NPs) was fabricated by a simple hydrothermal, no-template process. The nanostructure of TiOx-NRs influenced by the concentrations of hydrochloric (HCl) acid and sodium chloride (NaCl) was studied in detail. The substrate showed the strongest Raman enhancement, when the diameters of Au-NPs were around 40 nm and the gaps of Au-NPs were in the range of 5 nm to 10 nm. The surface electric field of our substrate was examined by finite-different time-domain (FDTD) solutions. Rhodamine 6G (R6G) was chosen as the probe molecule to study the SERS performance of the substrates. The Raman signal of 10−10 M R6G was detected clearly by the substrate with the enhancement factor of 2.64 × 108. All relative standard deviation (RSD) values of the major peaks for R6G were within the scope of 10.4% to 16.7%. The substrate could work efficiently even after immersed in water for one month.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Nanoarchitectonics of Small Molecule and DNA for Ultrasensitive Detection of Mercury

Reliable and ultrasensitive detection of mercury ions is of paramount importance for toxicology assessment, environmental protection, and human health. Herein, we present a novel optoelectronic approach based on nanoarchitectonics of small-molecule templated DNA system that consists of an adenine (A)-conjugated small organic semiconductor (BNA) and deoxyribo-oligothymidine (dT_n). This mutually templated dynamic chiral coassembly system (BNAn-dT_n) with tunable chiroptical, morphological, and electrical properties is tapped in to enable ultrasensitive and selective detection of inorganic and organometallic mercury in water. We observe a rapid transformation of the BNA_n-dT_n coassembly into a metallo-DNA duplex [dT-Hg-dT]_n in the presence of mercury, which is utilized for a chiro-optical and conductivity-based rapid and subnanomolar sensitivity (≥0.1 nM, 0.02 ppb) to mercury ions in water (∼100 times lower than United States Environmental Protection Agency tolerance limit). This ultrasensitive detection of inorganic and organometallic mercury is driven by a novel chemical design principle that allows strong mercury thymine interaction. This study is anticipated to inspire the development of future templated DNA nanotechnology-based optoelectronic devices for the rapid and ultrasensitive detection of numerous other toxic analytes.