Dopamine as A Robust Anchor to Immobilize Functional Molecules on the Iron Oxide Shell of Magnetic Nanoparticles

Solvothermal synthesis of polyvinyl pyrrolidone encapsulated, amine-functionalized copper ferrite and its use as a magnetic resonance imaging contrast agent

Copper ferrite nanoparticles for use as MRI contrast agents were synthesized using two different methods. A novel microwave-assisted (MW) solvothermal method was developed and compared to a conventional 12-hour synthesis (Reflux) as an eco-friendlier approach. This innovative synthesis method successfully produced nanoparticles with enhanced properties compared to traditional ferrite materials. The nanoparticles' morphological and magnetic properties were evaluated and tested in in-vivo MRI studies. The results revealed both similarities and differences between the amine-functionalized copper ferrite nanoparticles. FTIR, XRD, HRTEM, and VSM analyses indicated improved properties in the CuFe2O4-NH2 MW particles, while AFM confirmed successful polymer encapsulation of the nanoparticles. For the CuFe2O4-NH2 MW sample, 76.8 wt% copper ferrite and 23.2 wt% magnetite were detected, with crystallite sizes of 8 ± 2 nm and 13 ± 2 nm, respectively. In the CuFe2O4-NH2 Refl. sample, in addition to these two magnetic phases, larger copper particles (31.6 wt%) were also formed. DLS analysis demonstrated that the CuFe2O4-NH2 MW sample exhibited excellent colloidal stability, maintaining its size distribution in aqueous media for 3 hours without aggregation, unlike the CuFe2O4-NH2 Refl. sample, which showed slight aggregation. The CuFe2O4-NH2 MW sample displayed superparamagnetic behavior (Ms: 15 emu/g, Mr: 0 emu/g, Hc: 0 Oe), while the CuFe2O4-NH2 Refl. sample exhibited ferromagnetic characteristics (Ms: 40 emu/g, Mr: 1.35 emu/g, Hc: 30 Oe). Both samples produced comparable results during in vitro MRI measurements, showing similar T2* relaxation and signal characteristics. Further in vivo studies demonstrated that both samples induced significant hypointense changes. The study provides valuable insights into the synthesis, properties, and potential applications of these materials, emphasizing the importance of eco-friendly methods and the optimization of ferrite-based MRI contrast agents.

Adrenocortical Cancer Cell uptake of Iron Oxide Nanoparticles

Adrenocortical carcinoma (ACC) is a rare cancer with poor prognosis, treated primarily through surgery and chemotherapy. Other treatments like radiation or thermal ablation for metastases have limited success, and recurrence is common. More effective management options are needed. Magnetic iron oxide nanoparticles (IONP) show promise in cancer treatment due to their ability to be modified for selective uptake by cancer cells. This study investigated IONP uptake in ACC cell lines (H295R, HAC-15, MUC-1) using a multicellular model with endothelial cells (HUVEC) and monocytes. IONP uptake was concentration- and time-dependent, with optimal uptake at 10 μg/mL. IONP were found in the cytoplasm and intracellular vesicles of ACC cells. However, endothelial cells and monocytes also absorbed IONP, reducing uptake by ACC cells. These findings suggest ACC cells actively take up IONP, but better targeting is needed to enhance uptake specificity and efficiency.

Direct monitoring of the enzymatically sequestering and degrading of PET microplastics using hyperspectral Raman microscopy

Microplastics are commonly referred to as tiny plastic fragments polluting our environment, although their nanometric forms have also been found in our drinking water supplies and many living systems. Their removal is relevant for preserving our health and sustainability and is being pursued according to many different strategies, including filtration through selective porous materials or agglomeration using flocculant agents. An alternative nanotechnological approach described in this paper deals with the capture and degradation of micro and nanoplastics by enzyme-immobilized magnetic nanoparticles. Magnetic nanoparticles (Fe3O4) were functionalized with polydopamine (PDA) and Lipase enzyme straightforwardly to generate agents capable of removing and degrading µPET from an aqueous solution. In addition to synthesizing and characterizing the Fe3O4@PDA-Lipase nanoparticles and performing the µPET degradation, the novelty encompassed in this work is the successful use of confocal Raman microscopy to monitor the process, in real-time, through in situ hyperspectral images.

A review on synthesis, capping and applications of superparamagnetic magnetic nanoparticles

Magnetic nanoparticles (MNPs) have garnered significant attention from researchers due to their numerous technologically significant applications in diverse fields, including biomedicine, diagnostics, agriculture, optics, mechanics, electronics, sensing technology, catalysis, and environmental remediation. The superparamagnetic nature of MNP is exploited for many applications and remains fascinating to study many fundamental phenomena. The uniqueness of this review is that it gives an in-depth review of different synthesis approaches adopted for preparing magnetic nanoparticles and nanoparticle formation mechanisms, functionalizing them with different capping agents, and applying different functionalized magnetic nanoparticles. The important synthesis techniques covered include coprecipitation, microwave-assisted, sonochemical, sol-gel, microemulsion, hydrothermal/solvothermal, thermal decomposition, and mechano-chemical synthesis. Further, the advantages and disadvantages of each technique are discussed, and tables show important results of prepared particles. Other aspects covered in this review are the dispersion of magnetic nanoparticles in the continuous matrix, the influence of surface capping on high-temperature thermal stability, the long-term stability of ferrofluids, and applications of functionalized magnetic nanoparticles. For effective utilization of the ferrite nanoparticles, it is essential to formulate thermally and colloidally stable magnetic nanoparticles with desired magnetic properties. Capping enhances the phase transition temperature and long-term colloidal stability. Magnetic nanoparticles capped or functionalized with specific binding species, specific components like drugs, or other functional groups make them suitable for applications in biotechnology/biomedicine. Recent studies reveal the tremendous scope of MNPs in therapeutics and theranostics. The requirements for nanoparticle size, morphology, and physio-chemical properties, especially magnetic properties, functionalization, and stability, vary with applications. There are also challenges for precise size control and the cost-effective production of nanoparticles in large quantities. The review should be an ideal material for researchers working on magnetic nanomaterials and an excellent reference for freshers.

Characterization and biocompatibility of a bilayer PEEK-based scaffold for guiding bone regeneration

BACKGROUND

Polyetheretherketone (PEEK) is well known for its excellent physical-chemical properties and biosafety. The study aimed to open up a new method for clinical application of PEEK to reconstruct large-scale bone defects.

METHODS

A bilayer scaffold for bone regeneration was prepared by combining a sulfonated PEEK barrier framework (SPEEK) with a hydrogel layer loaded with aspirin (ASA) and nano-hydroxyapatite (nHAP) by the wet-bonding of Polydopamine (PDA).

RESULTS

The hydrogel was successfully adhered to the surface of SPEEK, resulting in significant changes including the introduction of bioactive groups, improved hydrophilicity, and altered surface morphology. Subsequent tests confirmed that the bilayer scaffold exhibited enhanced compression resistance and mechanical compatibility with bone compared to a single hydrogel scaffold. Additionally, the bilayer scaffold showed stable and reliable bonding properties, as well as excellent biosafety verified by cell proliferation and viability experiments using mouse embryo osteoblast precursor (MC3T3-E1) cells.

CONCLUSION

The bilayer bone regeneration scaffold prepared in this study showed promising potential in clinical application for bone regeneration.

Mussel-Inspired Multifunctional Polyethylene Glycol Nanoparticle Interfaces

Nanoparticles (NPs) are receiving increasing interest in biomedical applications. However, due to their large surface area, in physiological environments, they tend to interact with plasma proteins, inducing their agglomeration and ultimately resulting in a substantial efficiency decrease in diagnostic and therapeutic applications. To overcome such problems, NPs are typically coated with a layer of hydrophilic and biocompatible polymers, such as PEG chains. However, few examples exist in which this property could be systematically fine-tuned and combined with added properties, such as emission. Herein, we report a novel mussel-inspired catechol-based strategy to obtain biocompatible and multifunctional coatings, using a previously developed polymerization methodology based on the formation of disulfide bridges under mild oxidative conditions. Two families of NPs were selected as the proof of concept: mesoporous silica NPs (MSNPs), due to their stability and known applications, and magnetite NPs (Fe3O4 NPs), due to their small size (<10 nm) and magnetic properties. The PEG coating confers biocompatibility on the NPs and can be further functionalized with bioactive molecules, such as glucose units, through the end carboxylic acid moieties. Once we demonstrated the feasibility of our approach to obtaining PEG-based coatings on different families of NPs, we also obtained multifunctional coatings by incorporating fluorescein functionalities. The resulting coatings not only confer biocompatibility and excellent cell internalization, but also allow for the imaging and tracking of NPs within cells.

Synthesis and surface engineering of Ag chalcogenide quantum dots for near-infrared biophotonic applications

Quantum dots (QDs), a novel category of semiconductor materials, exhibit extraordinary capabilities in tuning optical characteristics. Their emergence in biophotonics has been noteworthy, particularly in bio-imaging, biosensing, and theranostics applications. Although conventional QDs such as PbS, CdSe, CdS, and HgTe have garnered attention for their promising features, the presence of heavy metals in these QDs poses significant challenges for biological use. To address these concerns, the development of Ag chalcogenide QDs has gained prominence owing to their near-infrared emission and exceptionally low toxicity, rendering them suitable for biological applications. This review explores recent advancements in Ag chalcogenide QDs, focusing on their synthesis methodologies, surface chemistry modifications, and wide-ranging applications in biomedicine. Additionally, it identifies future directions in material science, highlighting the potential of these innovative QDs in revolutionizing the field.

Stimuli-responsive microcarriers and their application in tissue repair: A review of magnetic and electroactive microcarrier

Microcarrier applications have made great advances in tissue engineering in recent years, which can load cells, drugs, and bioactive factors. These microcarriers can be minimally injected into the defect to help reconstruct a good microenvironment for tissue repair. In order to achieve more ideal performance and face more complex tissue damage, an increasing amount of effort has been focused on microcarriers that can actively respond to external stimuli. These microcarriers have the functions of directional movement, targeted enrichment, material release control, and providing signals conducive to tissue repair. Given the high controllability and designability of magnetic and electroactive microcarriers, the research progress of these microcarriers is highlighted in this review. Their structure, function and applications, potential tissue repair mechanisms, and challenges are discussed. In summary, through the design with clinical translation ability, meaningful and comprehensive experimental characterization, and in-depth study and application of tissue repair mechanisms, stimuli-responsive microcarriers have great potential in tissue repair.

Design, Synthesis, and Evaluation of a Novel Conjugate Molecule with Dopaminergic and Neuroprotective Activities for Parkinson's Disease

The escalating prevalence of Parkinson's disease (PD) underscores the need for innovative therapeutic interventions since current palliative measures, including the standard l-Dopa formulations, face challenges of tolerance and side effects while failing to address the underlying neurodegenerative processes. Here, we introduce DAD9, a novel conjugate molecule that aims to combine symptomatic relief with disease-modifying strategies for PD. Crafted through knowledge-guided chemistry, the molecule combines a nonantibiotic doxycycline derivative with dopamine, preserving neuroprotective attributes while maintaining dopaminergic agonism. This compound exhibited no off-target effects on PD-relevant cell functions and sustained antioxidant and anti-inflammatory properties of the tetracycline precursor. Furthermore, it effectively interfered with the formation and seeding of toxic α-synuclein aggregates without producing detrimental oxidative species. In addition, DAD9 was able to activate dopamine receptors, and docking simulations shed light onto the molecular details of this interaction. These findings position DAD9 as a potential neuroprotective dopaminergic agonist, promising advancements in PD therapeutics.

Covalent Organic Frameworks for the Purification of Recombinant Enzymes and Heterogeneous Biocatalysis

Recombinant enzymes have gained prominence due to their diverse functionalities and specificity and are often a greener alternative in biocatalysis. This context makes purifying recombinant enzymes from host cells and other impurities crucial. The primary goal is to isolate the pure enzyme of interest and ensure its stability under ambient conditions. Covalent organic frameworks (COFs), renowned for their well-ordered structure and permeability, offer a promising approach for purifying histidine-tagged (His-tagged) enzymes. Furthermore, immobilizing enzymes within COFs represents a growing field in heterogeneous biocatalysis. In this study, we have developed a flow-based technology utilizing a nickel-infused covalent organic framework (Ni-TpBpy COF) to combine two distinct processes: the purification of His-tagged enzymes and the immobilization of enzymes simultaneously. Our work primarily focuses on the purification of three His-tagged enzymes β-glucosidase, cellobiohydrolase, and endoglucanase as well as two proteins with varying molecular weights, namely, green fluorescent protein (27 kDa) and BG Rho (88 kDa). We employed Ni-TpBpy as a column matrix to showcase the versatility of our system. Additionally, we successfully obtained a Ni-TpBpy COF immobilized with enzymes, which can serve as a heterogeneous catalyst for the hydrolysis of p-nitrophenyl-β-d-glucopyranoside and carboxymethylcellulose. These immobilized enzymes demonstrated catalytic activity comparable to that of their free counterparts, with the added advantages of recyclability and enhanced stability under ambient conditions for an extended period, ranging from 60 to 90 days. This contrasts with the free enzymes, which do not maintain their activity as effectively over time.

Anchoring Polydopamine on ZnCo2 O4 Nanowire To Facilitate Urea Water Electrolysis

To overcome the sluggishness of the oxygen evolution reaction (OER), the urea oxidation reaction was developed. In the case of OER application studies ZnCo2 O4 is an excellent electrocatalyst, towards the UOR has been performed with surface-grown polydopamine (PDA) with surface-grown polydopamine (PDA). ZnCo2 O4 @PDA is produced over the surface of nickel foam by a hydrothermal method followed by self-polymerization of dopamine hydrochloride. Dopamine hydrochloride was varied in solution to study the optimal growth of PDA necessary to enhance the electrochemical activity. Prepared ZnCo2 O4 @PDA was characterized by X-ray diffraction, electronic structural, and morphology/microstructure studies. With successful confirmation, the developed electrode material was applied to UOR and ZnCo2 O4 @PDA-1.5, delivering an excellent low overpotential of 80 mV at 20 mA cm-2 in the electrolyte mixture of 1 M potassium hydroxide+0.33 M urea. To support the excellent UOR activity, other electrochemical properties such as the Tafel slope, electrochemical surface active sites, and electrochemical impedance spectroscopy were also studied. Furthermore, a schematic illustration explaining the UOR mechanism is shown to allow a clear understanding of the obtained electrochemical activity. Finally, urea water electrolysis was carried out in a two-electrode symmetrical cell and compared with water electrolysis. This clearly showed the potential of the developed material for efficient electrochemical hydrogen production.

Amine-assisted catechol-based nanocoating on ultrasmall iron oxide nanoparticles for high-resolution T1 angiography

Surface engineered iron oxide nanoparticles (IONPs) with catecholic ligands have been investigated as alternative T1 contrast agents. However, complex oxidative chemistry of catechol during IONP ligand exchange causes surface etching, heterogeneous hydrodynamic size distribution, and low colloidal stability because of Fe3+ mediated ligand oxidation. Herein, we report highly stable and compact (∼10 nm) Fe3+ rich ultrasmall IONPs functionalized with a multidentate catechol-based polyethylene glycol polymer ligand through amine-assisted catecholic nanocoating. The IONPs exhibit excellent stability over a broad range of pHs and low nonspecific binding in vitro. We also demonstrate that the resultant NPs have a long circulation time (∼80 min), enabling high resolution T1 magnetic resonance angiography in vivo. These results suggest that the amine assisted catechol-based nanocoating opens a new potential of metal oxide NPs to take a step forward in exquisite bio-application fields.

The Influence of Catechols on the Magnetization of Iron Oxide Nanoparticles

In this study, MNPs were functionalized with pyrocatechol (CAT), pyrogallol (GAL), caffeic acid (CAF), and nitrodopamine (NDA) at pH 8 and pH 11. The functionalization of the MNPs was successful, except in the case of NDA at pH 11. The thermogravimetric analyses indicated that the surface concentration of the catechols was between 1.5 and 3.6 molecules/nm². The saturation magnetizations (M_s) of the functionalized MNPs were higher than the starting material. XPS analyses showed only the presence of Fe(III) ions on the surface, thus refuting the idea of the Fe being reduced and magnetite being formed on the surfaces of the MNPs. Density functional theory (DFT) calculations were performed for two modes of adsorption of CAT onto two model surfaces: plain and adsorption via condensation. The total magnetization of both adsorption modes remained the same, indicating that the adsorption of the catechols does not affect the M_s. The analyses of the size and the size distribution showed an increase in the average size of the MNPs during the functionalization process. This increase in the average size of the MNPs and the reduction in the fraction of the smallest (i.e., <10 nm) MNPs explained the increase in the M_s values.

Plasmonic Sensing Assay for Long-Term Monitoring (PSALM) of Neurotransmitters in Urine

A liquid-based surface-enhanced Raman spectroscopy assay termed PSALM is developed for the selective sensing of neurotransmitters (NTs) with a limit of detection below the physiological range of NT concentrations in urine. This assay is formed by quick and simple nanoparticle (NP) "mix-and-measure" protocols, in which Fe^III bridges NTs and gold NPs inside the sensing hotspots. Detection limits of NTs from PreNP PSALM are significantly lower than those of PostNP PSALM, when urine is pretreated by affinity separation. Optimized PSALM enables the long-term monitoring of NT variation in urine in conventional settings for the first time, allowing the development of NTs as predictive or correlative biomarkers for clinical diagnosis.

Gold-iron oxide (Au/Fe3O4) magnetic nanoparticles as the nanoplatform for binding of bioactive molecules through self-assembly

Nanomedicine plays a crucial role in the development of next-generation therapies. The use of nanoparticles as drug delivery platforms has become a major area of research in nanotechnology. To be effective, these nanoparticles must interact with desired drug molecules and release them at targeted sites. The design of these “nanoplatforms” typically includes a functional core, an organic coating with functional groups for drug binding, and the drugs or bioactive molecules themselves. However, by exploiting the coordination chemistry between organic molecules and transition metal centers, the self-assembly of drugs onto the nanoplatform surfaces can bypass the need for an organic coating, simplifying the materials synthesis process. In this perspective, we use gold-iron oxide nanoplatforms as examples and outline the prospects and challenges of using self-assembly to prepare drug-nanoparticle constructs. Through a case study on the binding of insulin on Au-dotted Fe3O4 nanoparticles, we demonstrate how a self-assembly system can be developed. This method can also be adapted to other combinations of transition metals, with the potential for scaling up. Furthermore, the self-assembly method can also be considered as a greener alternative to traditional methods, reducing the use of chemicals and solvents. In light of the current climate of environmental awareness, this shift towards sustainability in the pharmaceutical industry would be welcomed.

Modulating cell signalling in vivo with magnetic nanotransducers

Weak magnetic fields offer nearly lossless transmission of signals within biological tissue. Magnetic nanomaterials are capable of transducing magnetic fields into a range of biologically relevant signals in vitro and in vivo. These nanotransducers have recently enabled magnetic control of cellular processes, from neuronal firing and gene expression to programmed apoptosis. Effective implementation of magnetically controlled cellular signalling relies on careful tailoring of magnetic nanotransducers and magnetic fields to the responses of the intended molecular targets. This primer discusses the versatility of magnetic modulation modalities and offers practical guidelines for selection of appropriate materials and field parameters, with a particular focus on applications in neuroscience. With recent developments in magnetic instrumentation and nanoparticle chemistries, including those that are commercially available, magnetic approaches promise to empower research aimed at connecting molecular and cellular signalling to physiology and behaviour in untethered moving subjects.

Decorated magnetic nanoparticles with polyvinyl alcohol brushes modified with metal chelate affinity groups for purification of proteins

Refining is a serious challenge in the production of recombinant proteins, and this study proposes a new and easy strategy for the synthesis of magnetic affinity nanoparticles. First, the nanoparticles attached to polyvinyl alcohol brushes were synthesized, and then the hydroxyl groups of this polymer were converted to chelate groups. The nanoparticles were examined by (SEM) scanning electron microscopy, (TEM) transmission electron microscopy, (DLS) dynamic light scattering, (FT-IR) Fourier transform infrared, (XRD) X-ray powder diffraction, (VSM) vibrating sample magnetometry, and (TGA) thermal gravimetric analysis. The results confirm that uniform and spherical magnetic polymer nanoparticles with high magnetization and superparamagnetic properties were successfully synthesized. The S100A9 protein, a His-tagged recombinant protein, was expressed and purified using the synthesized nanoparticles. According to the (SDS-PAGE) sulfate-polyacrylamide gel electrophoresis results, there is a high degree of resolution in protein separation. The synthesized nanoparticles have a high protein binding capacity of about 208 mg of protein per gram of nanoparticles.

Synthetic Approaches to Colloidal Nanocrystal Heterostructures Based on Metal and Metal-Oxide Materials

Composite inorganic nanoarchitectures, based on combinations of distinct materials, represent advanced solid-state constructs, where coexistence and synergistic interactions among nonhomologous optical, magnetic, chemical, and catalytic properties lay a basis for the engineering of enhanced or even unconventional functionalities. Such systems thus hold relevance for both theoretical and applied nanotechnology-based research in diverse areas, spanning optics, electronics, energy management, (photo)catalysis, biomedicine, and environmental remediation. Wet-chemical colloidal synthetic techniques have now been refined to the point of allowing the fabrication of solution free-standing and easily processable multicomponent nanocrystals with sophisticated modular heterostructure, built upon a programmed spatial distribution of the crystal phase, composition, and anchored surface moieties. Such last-generation breeds of nanocrystals are thus composed of nanoscale domains of different materials, assembled controllably into core/shell or heteromer-type configurations through bonding epitaxial heterojunctions. This review offers a critical overview of achievements made in the design and synthetic elaboration of colloidal nanocrystal heterostructures based on diverse associations of transition metals (with emphasis on plasmonic metals) and transition-metal oxides. Synthetic strategies, all leveraging on the basic seed-mediated approach, are described and discussed with reference to the most credited mechanisms underpinning regioselective heteroepitaxial deposition. The unique properties and advanced applications allowed by such brand-new nanomaterials are also mentioned.

Novel and Sustainable Colorants Developed via Incorporating Azo Chromophores into Dopamine Molecules

Inspired by the application of dopamine as an "anchor" and UV absorber, novel sustainable colorants with biscatecholic structure were synthesized through a simple incorporation of simple azo chromophores with dopamine. Their structures were confirmed using MS and NMR analyses, and their application on textile materials was investigated. Compared to the simple azo chromophores with almost no coloring ability on fabrics, the biscatecholic colorants could color different fabrics effectively, mainly through self-polymerization only in the presence of a trace amount of organic base at room temperature, which is environmentally friendly in terms of saving resources and alleviating chemical pollution. Meanwhile, the UV resistance of colored fabrics was enhanced significantly, showing the advantage of protecting wearers from UV damage.

Catch, Modify and Analyze: Methods of Chemoselective Modification of Cysteine-Containing Peptides

One effective solution in the analysis of complex mixtures, including protein or cell hydrolysates, is based on chemoselective derivatization of a selected group of compounds by using selective tags to facilitate detection. Another method is based on the capture of the desired compounds by properly designed solid supports, resulting in sample enrichment. Cysteine is one of the rarest amino acids, but at least one cysteine residue is present in more than 91% of human proteins, which clearly confirms its important role in biological systems. Some cysteine-containing peptides may serve as significant molecular biomarkers, which may emerge as key indices in the management of patients with particular diseases. In the current review, we describe recent advances in the development of cysteine-containing peptide modification techniques based on solution and solid phase derivatization and enrichment strategies.

Optical properties and photoactivity of carbon nanodots synthesized from olive solid wastes at different carbonization temperatures

Carbon nanodots (CNDs) have many fascinating properties, such as optical properties (UV-Visible absorption and fluorescence emission), which make them good candidates in many applications, such as photocatalysts for the degradation of several organic pollutants. This study aims to synthesize CNDs from olive solid wastes at different carbonization temperatures from 300 to 900 °C and study the effect on the optical properties of the CNDs, such UV-Vis, fluorescence, quantum yield, and energy bandgap, in addition to the influence on the photoactivity of the CNDs as photocatalysts for the degradation of methylene blue (MB). CNDs were prepared from olive solid wastes (OSWs) by pyrolysis at different temperatures (300-900 °C) for conversion to carbonized material, and then oxidized chemically in the presence of hydrogen peroxide (H2O2). It was found that an increase in the carbonization temperature of the OSWs leads to an increase in the product yield with a maximum value at 500 °C, and it then decreased dramatically. On the other hand, a decrease in fluorescence due to the diminishment of oxygen groups and the destruction of the surface of the CNDs was observed. The higher quantum yield (5.17%) and bandgap (2.77 eV) were achieved for CNDs prepared from OSWs that carbonized at 300 °C. The rate and degradation efficiency of MB were studied with the different synthesized CNDs, and it was found that an increase in the carbonization temperature leads to a decrease in the rate and degradation efficiency of MB, with the highest degradation rate of 0.0575 min-1 and degradation efficiency of 100% after 120 minutes of light irradiation being realized for the sample carbonized at 300 °C.

Facile synthesis of peanut-like Sn-doped silica nano-adsorbent for affinity separation of proteins

A peanut-like hollow silica (denoted as p-l-hSiO2) adsorbent is prepared in a facile method, which is composed of several silica nanospheres and has an average diameter of 22 nm, with thickness of 5 nm. Its Brunauer-Emmett-Teller (BET) surface area, pore volume and pore size are 258.9 m2 g-1, 1.56 cm3 g-1 and 3.9 nm, respectively. Then the afforded p-l-hSiO2/GSH adsorbent is applied to purify glutathione S-transferases-tagged (denoted as GST-tagged) proteins. It is found that the p-l-hSiO2 adsorbent exhibits a specific adsorption, a high binding capacity (6.80 mg g-1), good recycling performance and high recovery (90.1%) to the target proteins, showing promising potential for the affinity separation of GST-tagged proteins.

Immobilization of fibrinolytic protease from Mucor subtilissimus UCP 1262 in magnetic nanoparticles

This work reports the immobilization of a fibrinolytic protease (FP) from Mucor subtilissimus UCP 1262 on Fe₃O₄ magnetic nanoparticles (MNPs) produced by precipitation of FeCl₃·6H₂O and FeCl₂·4H₂O, coated with polyaniline and activated with glutaraldehyde. The FP was obtained by solid state fermentation, precipitated with 40-60% ammonium sulfate, and purified by DEAE-Sephadex A50 ion exchange chromatography. The FP immobilization procedure allowed for an enzyme retention of 52.13%. The fibrinolytic protease immobilized on magnetic nanoparticles (MNPs/FP) maintained more than 60% of activity at a temperature of 40 to 60 °C and at pH 7 to 10, when compared to the non-immobilized enzyme. MNPs and MNPs/FP did not show any cytotoxicity against HEK-293 and J774A.1 cells. MNPs/FP was not hemolytic and reduced the hemolysis induced by MNPs from 2.07% to 1.37%. Thrombus degradation by MNPs/FP demonstrated that the immobilization process guaranteed the thrombolytic activity of the enzyme. MNPs/FP showed a total degradation of the γ chain of human fibrinogen within 90 min. These results suggest that MNPs/FP may be used as an alternative strategy to treat cardiovascular diseases with a targeted release through an external magnetic field.

Colloidal Inorganic Ligand-Capped Nanocrystals: Fundamentals, Status, and Insights into Advanced Functional Nanodevices

Colloidal nanocrystals (NCs) are intriguing building blocks for assembling various functional thin films and devices. The electronic, optoelectronic, and thermoelectric applications of solution-processed, inorganic ligand (IL)-capped colloidal NCs are especially promising as the performance of related devices can substantially outperform their organic ligand-capped counterparts. This in turn highlights the significance of preparing IL-capped NC dispersions. The replacement of initial bulky and insulating ligands capped on NCs with short and conductive inorganic ones is a critical step in solution-phase ligand exchange for preparing IL-capped NCs. Solution-phase ligand exchange is extremely appealing due to the highly concentrated NC inks with completed ligand exchange and homogeneous ligand coverage on the NC surface. In this review, the state-of-the-art of IL-capped NCs derived from solution-phase inorganic ligand exchange (SPILE) reactions are comprehensively reviewed. First, a general overview of the development and recent advancements of the synthesis of IL-capped colloidal NCs, mechanisms of SPILE, elementary reaction principles, surface chemistry, and advanced characterizations is provided. Second, a series of important factors in the SPILE process are offered, followed by an illustration of how properties of NC dispersions evolve after ILE. Third, surface modifications of perovskite NCs with use of inorganic reagents are overviewed. They are necessary because perovskite NCs cannot withstand polar solvents or undergo SPILE due to their soft ionic nature. Fourth, an overview of the research progresses in utilizing IL-capped NCs for a wide range of applications is presented, including NC synthesis, NC solid and film fabrication techniques, field effect transistors, photodetectors, photovoltaic devices, thermoelectric, and photoelectrocatalytic materials. Finally, the review concludes by outlining the remaining challenges in this field and proposing promising directions to further promote the development of IL-capped NCs in practical application in the future.

Infection microenvironment-related antibacterial nanotherapeutic strategies

The emergence and spread of antibiotic resistance is one of the biggest challenges in public health. There is an urgent need to discover novel agents against the occurrence of multidrug-resistant bacteria, such as methicillin-resistant Staphylococcus aureus and vancomycin-resistant enterococci. The drug-resistant pathogens are able to grow and persist in infected sites, including biofilms, phagosomes, or phagolysosomes, which are more difficult to eradicate than planktonic ones and also foster the development of drug resistance. For years, various nano-antibacterial agents have been developed in the forms of antibiotic nanocarriers. Inorganic nanoparticles with intrinsic antibacterial activity and inert nanoparticles assisted by external stimuli, including heat, photon, magnetism, or sound, have also been discovered. Many of these strategies are designed to target the unique microenvironment of bacterial infections, which have shown potent antibacterial effects in vitro and in vivo. This review summarizes ongoing efforts on antibacterial nanotherapeutic strategies related to bacterial infection microenvironments, including targeted antibacterial therapy and responsive antibiotic delivery systems. Several grand challenges and future directions for the development and translation of effective nano-antibacterial agents are also discussed. The development of innovative nano-antibacterial agents could provide powerful weapons against drug-resistant bacteria in systemic or local bacterial infections in the foreseeable future.

Optical biosensing of markers of mucosal inflammation

We report the design and adaptation of iron/iron oxide nanoparticle-based optical nanobiosensors for enzymes or cytokine/chemokines that are established biomarkers of lung diseases. These biomarkers comprise ADAM33, granzyme B, MMP-8, neutrophil elastase, arginase, chemokine (C-C motif) ligand 20 and interleukin-6. The synthesis of nanobiosensors for these seven biomarkers, their calibration with commercially available enzymes and cytokines/chemokines, as well as their validation using bronchoalveolar lavage (BAL) obtained from a mouse model of TLR3-mediated inflammation are discussed here. Exhaled Breath Condensate (EBC) is a minimally invasive approach for sampling airway fluid in the diagnosis and management of various lung diseases in humans (e.g., asthma, COPD and viral infections). We report the proof-of-concept of using human EBC in conjunction with nanobiosensors for diagnosis/monitoring airway inflammation. These findings suggest that, with nanosensor technology, human EBC can be utilized as a liquid biopsy to monitor inflammation/remodeling in lung disease.

Poly(catechol) modified Fe3O4 magnetic nanocomposites with continuous high Fenton activity for organic degradation at neutral pH

Fe3O4 magnetic nanoparticles (MNPs) have been widely used as a recyclable catalyst in Fenton reaction for organic degradation. However, the pristine MNPs suffer from the drawbacks of iron leaching in acidic conditions as well as the decreasing catalytic activity of organic degradation at a pH higher than 3.0. To solve the problems, Fe3O4 MNPs were modified by poly(catechol) (Fe3O4/PCC MNPs) using a facile chemical co-precipitation method. The poly(catechol) modification improved both the dispersity and the surface negative charges of Fe3O4/PCC MNPs, which are beneficial to the catalytic activity of MNPs for organic degradation. Moreover, the poly(catechol) modification enhanced the efficiency of Fe(II) regeneration during Fenton reaction due to the acceleration of Fe(III) reduction by the phenolic/quinonoid redox pair. As a result, the Fenton reaction with Fe3O4/PCC MNPs could efficiently degrade organic molecules, exampled by methylene blue (MB), in an expanded pH range between 3.0 and 10.0. In addition, Fe3O4/PCC MNPs could be reused up to 8 cycles for the MB degradation with negligible iron leaching of lower than 1.5 mg L-1. This study demonstrated Fe3O4/PCC MNPs are a promising heterogeneous Fenton catalysts for organic degradation.

Synthesis, Characterization, and Cytotoxicity Evaluation of Polyethylene Glycol-Coated Iron Oxide Nanoparticles for Radiotherapy Application

Background:

Treatment methods for cancer that are widely being utilized affect both normal and cancerous cells. We report synthesis polyethylene glycol (PEG)-coated Fe₃O₄ nanoparticles (NPs) and its characteristic properties and appraise its potential as a promising radiation sensitizer candidate in radiotherapy that improves cancer treatment and reduces side effects of radiation.

Materials and methods:

PEG-coated Fe₃O₄ NPs were synthesized by chemical coprecipitation method and characterized by studying their size, structure, functional group, stability, magnetization, and cytotoxicity using different techniques. X-ray powder diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis results show that Fe₃O₄ NPs have been functionalized with PEG molecules during the course of synthesis.

Results

Synthesized NPs have good stability based on zeta-potential study. Dynamic light-scattering results reveal that PEG-coated Fe₃O₄ has a greater hydrodynamic size than bare Fe₃O₄. Transmission electron microscopy (TEM) micrograph exhibited that NPs are roughly spherical with size in range of 10–20 nm. Saturation magnetization value of PEG-coated and bare Fe₃O₄ also confirms coating and shows superparamagnetic behavior. Cytotoxicity evaluation study indicated that PEG-coated Fe₃O₄ is biocompatible on L929 and toxic on Michigan Cancer Foundation-7 (MCF-7) (breast cancer cells).

Conclusion:

These characterized properties of PEG-coated Fe₃O₄ NPs show that it could be used as a potential radiosensitizer candidate in radiotherapy to significantly improve cancer treatment and minimize painful side effects of radiation.

Self-Template Synthesis of Prussian Blue Analogue Hollow Polyhedrons as Superior Sodium Storage Cathodes

Prussian blue and its analogues with three-dimensional frame structures have been shown to be of great importance in the research and development of sodium-ion batteries (SIBs). Herein, we develop a simple and convenient self-template method to prepare a hollow-structured Prussian blue analogue (CoFe-PBA). This structure is conducive to buffer the volume changes during ion extraction and insertion processes and shorten the ion diffusion path. When further building a thin polydopamine (PDA) coating, the synthesized CoFe-PBA@PDA exhibits a high discharge capacity of 123.1 mAh g^-1 at 0.1 A g^-1 with a capacity retention of 71.5% after 500 cycles. Moreover, the capacity retention of CoFe-PBA@PDA after 100 cycles is 14.3% higher than that of the two comparison samples. In addition, the reversible structure of CoFe-PBA@PDA without forming a new phase was verified by in situ X-ray diffraction. This work may provide another design idea or strategy for improving the stability of the PBA cathodes used in SIBs.

Advantages and Disadvantages of Using Magnetic Nanoparticles for the Treatment of Complicated Ocular Disorders

Nanomaterials provide enormous opportunities to overcome the limitations of conventional ocular delivery systems, such as low therapeutic efficacy, side effects due to the systemic exposure, or invasive surgery. Apart from the more common ocular disorders, there are some genetic diseases, such as cystic fibrosis, that develop ocular disorders as secondary effects as long as the disease progresses. These patients are more difficult to be pharmacologically treated using conventional drug routes (topically, systemic), since specific pharmacological formulations can be incompatible, display increased toxicity, or their therapeutic efficacy decreases with the administration of different kind of chemical molecules. Magnetic nanoparticles can be used as potent drug carriers and magnetic hyperthermia agents due to their response to an external magnetic field. Drugs can be concentrated in the target point, limiting the damage to other tissues. The other advantage of these magnetic nanoparticles is that they can act as magnetic resonance imaging agents, allowing the detection of the exact location of the disease. However, there are some drawbacks related to their use in drug delivery, such as the limitation to maintain efficacy in the target organ once the magnetic field is removed from outside. Another disadvantage is the difficulty in maintaining the therapeutic action in three dimensions inside the human body. This review summarizes all the application possibilities related to magnetic nanoparticles in ocular diseases.

Progress and prospects of magnetic iron oxide nanoparticles in biomedical applications: A review

Nanoscience has been considered as one of the most substantial research in modern science. The utilization of nanoparticle (NP) materials provides numerous advantages in biomedical applications due to their unique properties. Among various types of nanoparticles, the magnetic nanoparticles (MNPs) of iron oxide possess intrinsic features, which have been efficiently exploited for biomedical purposes including drug delivery, magnetic resonance imaging, Magnetic-activated cell sorting, nanobiosensors, hyperthermia, and tissue engineering and regenerative medicine. The size and shape of nanostructures are the main factors affecting the physicochemical features of superparamagnetic iron oxide nanoparticles, which play an important role in the improvement of MNP properties, and can be controlled by appropriate synthesis strategies. On the other hand, the proper modification and functionalization of the surface of iron oxide nanoparticles have significant effects on the improvement of physicochemical and mechanical features, biocompatibility, stability, and surface activity of MNPs. This review focuses on popular methods of fabrication, beneficial surface coatings with regard to the main required features for their biomedical use, as well as new applications.

Traceable Nano-Biohybrid Complexes by One-Step Synthesis as CRISPR-Chem Vectors for Neurodegenerative Diseases Synergistic Treatment

Abnormal protein aggregations are essential pathological features of neurodegenerative diseases. Eliminating while inhibiting the regeneration of these protein aggregates is considered an effective treatment strategy. Herein, the CRISPR/Cas9 gene-editing tool is employed to inhibit the regeneration of disease-related proteins, while chemical drugs are applied to eliminate the proteins that are produced. To efficiently deliver CRISPR-chem drugs into brain lesions, traceable nano-biohybrid complexes (F-TBIO) are constructed by one-step synthesis and CRISPR/Cas9 plasmids (CF-TBIO) are loaded in a controllable manner. CF-TBIO can knock out the BACE1 gene and reduce the burden of amyloid-β, and thereby significantly improve the cognitive abilities of 2xTg-AD mice. In particular, by prolonging the dosing interval, the pathological damage and behavioral abilities of 2xTg-AD mice are still significantly improved. During the therapeutic process, CF-TBIO with a high relaxation rate provides accurate imaging signals in the complex brain physiological environment. The finding shows that CF-TBIO has great potential to serve as a CRISPR-chem drug-delivery platform for neurodegenerative diseases therapy.

Chelating Agent Functionalized Substrates for the Formation of Thick Films via Electrophoretic Deposition

Incorporating nanoparticles into devices for a wide range of applications often requires the formation of thick films, which is particularly necessary for improving magnetic power storage, microwave properties, and sensor performance. One approach to assembling nanoparticles into films is the use of electrophoretic deposition (EPD). This work seeks to develop methods to increase film thickness and stability in EPD by increasing film-substrate interactions via functionalizing conductive substrates with various chelating agents. Here, we deposited iron oxide nanoparticles onto conductive substrates functionalized with three chelating agents with different functional moieties and differing chelating strengths. We show that increasing chelating strength can increase film-substrate interactions, resulting in thicker films when compared to traditional EPD. Results will also be presented on how the chelating strength relates to film formation as a function of deposition conditions. Yield for EPD is influenced by deposition conditions including applied electric field, particle concentration, and deposition time. This work shows that the functionalization of substrates with chelating agents that coordinate strongly with nanoparticles (phosphonic acid and dopamine) overcome parameters that traditionally hinder the deposition of thicker and more stable films, such as applied electric field and high particle concentration. We show that functionalizing substrates with chelating agents is a promising method to fabricate thick, stable films of nanoparticles deposited via EPD over a larger processing space by increasing film-substrate interactions.

Phenolic-enabled nanotechnology: versatile particle engineering for biomedicine

Phenolics are ubiquitous in nature and have gained immense research attention because of their unique physiochemical properties and widespread industrial use. In recent decades, their accessibility, versatile reactivity, and relative biocompatibility have catalysed research in phenolic-enabled nanotechnology (PEN) particularly for biomedical applications which have been a major benefactor of this emergence, as largely demonstrated by polydopamine and polyphenols. Therefore, it is imperative to overveiw the fundamental mechanisms and synthetic strategies of PEN for state-of-the-art biomedical applications and provide a timely and comprehensive summary. In this review, we will focus on the principles and strategies involved in PEN and summarize the use of the PEN synthetic toolkit for particle engineering and the bottom-up synthesis of nanohybrid materials. Specifically, we will discuss the attractive forces between phenolics and complementary structural motifs in confined particle systems to synthesize high-quality products with controllable size, shape, composition, as well as surface chemistry and function. Additionally, phenolic's numerous applications in biosensing, bioimaging, and disease treatment will be highlighted. This review aims to provide guidelines for new scientists in the field and serve as an up-to-date compilation of what has been achieved in this area, while offering expert perspectives on PEN's use in translational research.

A General Approach for Monolayer Adsorption of High Weight Loadings of Uniform Nanocrystals on Oxide Supports

Monodispersed metal and semiconductor nanocrystals have attracted great attention in fundamental and applied research due to their tunable size, morphology, and well-defined chemical composition. Utilizing these nanocrystals in a controllable way is highly desirable especially when using them as building blocks for the preparation of nanostructured materials. Their deposition onto oxide materials provide them with wide applicability in many areas, including catalysis. However, so far deposition methods are limited and do not provide control to achieve high particle loadings. This study demonstrates a general approach for the deposition of hydrophobic ligand-stabilized nanocrystals on hydrophilic oxide supports without ligand-exchange. Surface functionalization of the supports with primary amine groups either using an organosilane ((3-aminopropyl)trimethoxysilane) or bonding with aminoalcohols (3-amino-1,2-propanediol) were found to significantly improve the interaction between nanocrystals and supports achieving high loadings (>10 wt. %). The bonding method with aminoalcohols guarantees the opportunity to remove the binding molecules thus allowing clean metal/oxide materials to be obtained, which is of great importance in the preparation of supported nanocrystals for heterogeneous catalysis.

Hollow iron oxide nanomaterials: synthesis, functionalization, and biomedical applications

Hollow iron oxide nanoparticles (NPs) are an attractive class of hollow nanostructures that have received significant attention in the biomedical field due to their low toxicity, good biocompatibility, and intrinsic magnetic nature. We review the recent advances in the preparation, surface functionalization, and biomedical applications of hollow iron oxide NPs. Hollow iron oxide NPs are generally synthesized by the following five strategies, including the Kirkendall effect, galvanic replacement, chemical etching, nano template-mediated, and hydrothermal/solvothermal routes. We also summarize the general strategies for iron oxide NP surface functionalization. Moreover, various promising biomedical applications of hollow iron oxide NPs, including magnetic resonance imaging, drug delivery, and cancer therapy, are highlighted in detail. Finally, perspectives of hollow iron oxide NPs are provided.

Influence of interaction between surface-modified magnetic nanoparticles with infectious biofilm components in artificial channel digging and biofilm eradication by antibiotics in vitro and in vivo

Magnetic targeting of antimicrobial-loaded magnetic nanoparticles to micrometer-sized infectious biofilms is challenging. Bacterial biofilms possess water channels that facilitate transport of nutrient and metabolic waste products, but are insufficient to allow deep penetration of antimicrobials and bacterial killing. Artificial channel digging in infectious biofilms involves magnetically propelling nanoparticles through a biofilm to dig additional channels to enhance antimicrobial penetration. This does not require precise targeting. However, it is not known whether interaction of magnetic nanoparticles with biofilm components impacts the efficacy of antibiotics after artificial channel digging. Here, we functionalized magnetic-iron-oxide-nanoparticles (MIONPs) with polydopamine (PDA) to modify their interaction with staphylococcal pathogens and extracellular-polymeric-substances (EPS) and relate the interaction with in vitro biofilm eradication by gentamicin after magnetic channel digging. PDA-modified MIONPs had less negative zeta potentials than unmodified MIONPs due to the presence of amino groups and accordingly more interaction with negatively charged staphylococcal cell surfaces than unmodified MIONPs. Neither unmodified nor PDA-modified MIONPs interacted with EPS. Concurrently, use of non-interacting unmodified MIONPs for artificial channel digging in in vitro grown staphylococcal biofilms enhanced the efficacy of gentamicin more than the use of interacting, PDA-modified MIONPs. In vivo experiments in mice using a sub-cutaneous infection model confirmed that non-interacting, unmodified MIONPs enhanced eradication by gentamicin of Staphylococcus aureus Xen36 biofilms about 10 fold. Combined with the high biocompatibility of magnetic nanoparticles, these results form an important step in understanding the mechanism of artificial channel digging in infectious biofilms for enhancing antibiotic efficacy in hard-to-treat infectious biofilms in patients.

Magnetic Polymer Composite Particles: Design and Magnetorheology

As a family of smart functional hybrid materials, magnetic polymer composite particles have attracted considerable attention owing to their outstanding magnetism, dispersion stability, and fine biocompatibility. This review covers their magnetorheological properties, namely, flow curve, yield stress, and viscoelastic behavior, along with their synthesis. Preparation methods and characteristics of different types of magnetic composite particles are presented. Apart from the research progress in magnetic polymer composite synthesis, we also discuss prospects of this promising research field.

Size and PEG Length-Controlled PEGylated Monocrystalline Superparamagnetic Iron Oxide Nanocomposite for MRI Contrast Agent

OBJECTIVE

PEGylated superparamagnetic iron oxide (SPIO) is the most promising alternatives to gadolinium-based contrast agents (GBCAs) in MRI. This paper is to explore the imaging effects of PEGylated SPIO, which is influenced by particle sizes and surface polyethylene glycol (PEG) coating, using as MRI contrast agents at different magnetic field intensities.

METHODS

Firstly, nine PEGylated monocrystalline SPIO nanoparticles with different nanocrystal sizes and different molecular weights PEG coating were prepared, and then physical and biological properties were analyzed. Finally, MRI imaging in vivo was performed to observe the imaging performance.

RESULTS

Nine PEGylated monocrystalline SPIO nanoparticles have good relaxivities, serum stability, and biosecurity. At the same time, they show different imaging characteristics at different magnetic field intensities. Eight-nanometer SPIO@PEG5k is an effective T 2 contrast agent at 3.0 T (r 2/r 1 = 14.0), is an ideal T 1-T 2 dual-mode contrast agent at 1.5 T (r 2/r 1 = 6.52), and is also an effective T 1 contrast agent at 0.5 T (r 2/r 1 = 2.49), while 4-nm SPIO@PEG5k is a T 1-T 2 dual-mode contrast agent at 3.0 T (r 2/r 1 = 5.24), and is a useful T 1 contrast agent at 0.5 T (r 2/r 1 = 1.74) and 1.5 T (r 2/r 1 = 2.85). MRI studies in vivo at 3.0 T further confirm that 4-nm SPIO@PEG5k displays excellent T 1-T 2 dual-mode contrast enhancement, whereas 8-nm SPIO@PEG5k only displays T 2 contrast enhancement.

CONCLUSION

PEGylated SPIOs with different nanocrystal sizes and PEG coating can be used as T 1, T 2, or T 1-T 2 dual-mode contrast agents to meet the clinical demands of MRI at specific magnetic fields.

Engineered Fe3O4-based nanomaterials for diagnosis and therapy of cancer

Recent developments of Fe₃O₄ NP-based theranostic nanoplatforms and their applications in tumor-targeted imaging and therapy.

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Reversible addition–fragmentation chain-transfer (RAFT) polymerization is a powerful tool for the precise formation of macromolecular building blocks that can be used for the construction of well-defined nanocomposites.

Dopamine-Decorated TiO2 Nanoparticles in Water: A QM/MM vs an MM Description

Nanoparticle functionalization is a modern strategy in nanotechnology to build up devices for several applications. Modeling fully decorated metal oxide nanoparticles of realistic size (few nanometers) in an aqueous environment is a challenging task. In this work, we present a case study relevant for solar-light exploitation and for biomedical applications, i.e., a dopamine-functionalized TiO₂ nanoparticle (1700 atoms) in bulk water, for which we have performed an extensive comparative investigation with both MM and QM/MM approaches of the structural properties and of the conformational dynamics. We have used a combined multiscale protocol for a more efficient exploration of the complex conformational space. On the basis of the results of this study and of some QM and experimental data, we have defined strengths and limitations of the existing force field parameters. Our findings will be useful for an improved modeling and simulation of many other similar hybrid bioinorganic nanosystems in an aqueous environment that are pivotal in a broad range of nanotechnological applications.