DNA-controlled partition of carbon nanotubes in polymer aqueous two-phase systems

Understanding DNA-encoded carbon nanotube sorting and sensing via sub-nm-resolution structural determination

DNA has demonstrated the abilities to differentiate single-wall carbon nanotubes (SWCNTs) with various chiralities and manipulate their analyte sensing properties. However, the fundamental mechanisms underlying these remarkable abilities remain unclear due to the lack of high-resolution determination of DNA structures on SWCNTs. Here, we combine atomic force microscopy and single-particle cryo-electron microscopy to determine DNA structures on five different types of single-chirality SWCNTs, achieving unprecedented subnanometer resolution. This resolution enables the direct observation of left-handed helical DNA structures with pitches ranging from 1.59 to 2.20 nm, depending on the DNA sequence and nanotube chirality. These findings provide structural insights into the mechanisms by which DNA differentiates the chirality of SWCNTs, and governs the sensitivity, dynamic response range, and analyte differentiability of SWCNT sensors. We propose a non-Watson-Crick hydrogen-bonding network model, which not only accounts for the observed ordered DNA structures but also facilitates the design of DNA sequences for targeted SWCNT purification and desired SWCNT sensor performance.

Single-wall carbon nanotube separations via aqueous two-phase extraction: new prospects enabled by high-throughput methods

Aqueous two-phase extraction (ATPE) is an effective and scalable liquid-phase processing method for purifying single species of single-wall carbon nanotubes (SWCNTs) from multiple species mixtures. Recent metrological developments have led to advances in the speed of identifying solution parameters leading to more efficient ATPE separations with greater fidelities. In this feature article, we review these developments and discuss their vast potential to further advance SWCNT separations science towards the optimization of production scale processes and the full realization of SWCNT-enabled technologies.

Accurate DNA Sequence Prediction for Sorting Target-Chirality Carbon Nanotubes and Manipulating Their Functionalities

Synthetic single-wall carbon nanotubes (SWCNTs) contain various chiralities, which can be sorted by DNA. However, finding DNA sequences for this purpose mainly relies on trial-and-error methods. Predicting the right DNA sequences to sort SWCNTs remains a substantial challenge. Moreover, it is even more daunting to predict sequences for sorting SWCNTs with target chirality. Here, we present a deep-learning (DL) enhanced strategy for the accurate prediction of DNA sequences capable of sorting target-chirality nanotubes. We first experimentally screened 216 DNA sequences using aqueous two-phase (ATP) separation, resulting in 116 resolving sequences that can purify 17 distinct single-chirality SWCNTs. These experimental results created a comprehensive training data set. We utilized the recently released 3D molecular representation learning framework, Uni-Mol, to construct a DL workflow that maps atomistic-level structural information on DNA sequences into the feature space. This information captures the structural features of DNA molecules that are crucial for their interactions with SWCNTs. This may account for the superior performance of our DL models. The models successfully predicted resolving sequences for (6,5), (6,6), and (7,4) SWCNTs with accuracy rates of 87.5, 90, and 70%, respectively. Importantly, the discovery of numerous resolving sequences for (6,5) SWCNTs allows us to systematically manipulate the sequence-dependent absorption spectral shift, photoluminescence intensity, and surfactant sensitivity of DNA-(6,5) hybrids and elucidate the underlying mechanisms.

Morphology Determination of Luminescent Carbon Nanotubes by Analytical Super-Resolution Microscopy Approaches

The ability to determine the precise structure of nano-objects is essential for a multitude of applications. This is particularly true of single-walled carbon nanotubes (SWCNTs), which are produced as heterogeneous samples. Current techniques used for their characterization require sophisticated instrumentation, such as atomic force microscopy (AFM), or compromise on accuracy. In this paper, we propose to use super-resolution microscopy (SRM) to accurately determine the morphology (orientation, length, and shape) of individual luminescent SWCNTs. We generate super-resolved images using three recently published SRM analytical software packages (DPR, eSRRF, and MSSR) and metrologically compare their performances to determine the morphological properties of SWCNTs. For this, ground-truth information on nanotube morphologies was obtained using polarization measurements and AFM to directly correlate the results from SRM at the single particle level. We show a more than 4-fold improvement in resolution over standard photoluminescence imaging, revealing hidden morphologies as efficiently as AFM. We finally demonstrate that DPR, and eventually eSRRF, can effectively assess SWCNT length distribution in a much faster and more accessible way than AFM. We believe that this approach can be generalized to other types of luminescent nanostructures and thus become a standard for rapid and accurate characterization of samples.

Optical Aptamer-Based Cytokine Nanosensor Detects Macrophage Activation by Bacterial Toxins

Overactive or dysregulated cytokine expression is a hallmark of many acute and chronic inflammatory diseases. This is true for acute or chronic infections, neurodegenerative diseases, autoimmune diseases, cardiovascular diseases, cancer, and others. Cytokines such as interleukin-6 (IL-6) are known therapeutic targets and biomarkers for such inflammatory diseases. Platforms for cytokine detection are, therefore, desirable tools for both research and clinical applications. Single-walled carbon nanotubes (SWCNT) are versatile nanomaterials with near-infrared fluorescence that can serve as transducers for optical sensors. When functionalized with an analyte-specific recognition element, SWCNT emission may become sensitive and selective toward the desired target. SWCNT-aptamer sensors are easily assembled, inexpensive, and biocompatible. In this work, we introduced a nanosensor design based on SWCNT and a DNA aptamer specific to IL-6. We first evaluated several SWCNT-aptamer constructs based on this simple direct complexation method, wherein the aptamer both solubilizes the SWCNT and confers sensitivity to IL-6. The sensor limit of detection, 105 ng/mL, lies in the relevant range for pathological IL-6 levels. Upon investigation of sensor kinetics, we found rapid response within seconds of antigen addition which continued over the course of 3 h. We found that this sensor construct is stable and the aptamer is not displaced from the nanotube surface during IL-6 detection. Finally, we investigated the ability of this sensor construct to detect macrophage activation caused by bacterial lipopolysaccharides (LPS) in an in vitro model of disease, finding rapid and sensitive detection of macrophage-expressed IL-6. We are confident that further development of this sensor will have novel implications for diagnosis of acute and chronic inflammatory diseases, in addition to contributing to the understanding of the role of cytokines in these diseases.

Sequence-Dependent Surface Coverage of ssDNA Coatings on Single-Wall Carbon Nanotubes

A combination of experimental measurements and molecular dynamics (MD) simulations was used to investigate how the surfaces of single-wall carbon nanotubes (SWCNTs) are covered by adsorbed ssDNA oligos with different base compositions and lengths. By analyzing the UV absorption spectra of ssDNA-coated SWCNTs before and after coating displacement by a transparent surfactant, the mass ratios of adsorbed ssDNA to SWCNTs were determined for poly-T, poly-C, GT-containing, and AT-containing ssDNA oligos. Based on the measured mass ratios, it is estimated that an average of 20, 22, 26, or 32 carbon atoms are covered by one adsorbed thymine, cytosine, adenine, or guanine nucleotide, respectively. In addition, the UV spectra revealed electronic interactions of varying strengths between the nucleobase aromatic rings and the nanotube π-systems. Short poly-T DNA oligos show stronger π-π stacking interactions with SWCNT surfaces than do short poly-C DNA oligos, whereas both long poly-C and poly-T DNA oligos show strong interactions. These experiments were complemented by MD computations on simulated systems that were constrained to match the measured ssDNA/SWCNT mass ratios. The surface coverages computed from the MD results varied with oligo composition in a pattern that correlates higher measured yields of nanotube fluorescence with greater surface coverage.

Recent advances in drug delivery applications of aqueous two-phase systems

Aqueous two-phase systems (ATPSs) are liquid-liquid equilibria between two aqueous phases that usually contain over 70% water content each, which results in a nontoxic organic solvent-free environment for biological compounds and biomolecules. ATPSs have attracted significant interest in applications for formulating carriers (microparticles, nanoparticles, hydrogels, and polymersomes) which can be prepared using the spontaneous phase separation of ATPSs as a driving force, and loaded with a wide range of bioactive materials, including small molecule drugs, proteins, and cells, for delivery applications. This review provides a detailed analysis of various ATPSs, including strategies employed for particle formation, polymerization of droplets in ATPSs, phase-guided block copolymer assemblies, and stimulus-responsive carriers. Processes for loading various bioactive payloads are discussed, and applications of these systems for drug delivery are summarized and discussed.

Surfactant Micelle-Driven High-Efficiency and High-Resolution Length Separation of Carbon Nanotubes for Electronic Applications

High-efficiency extraction of long single-wall carbon nanotubes (SWCNTs) with excellent optoelectronic properties from SWCNT solution is critical for enabling their application in high-performance optoelectronic devices. Here, a straightforward and high-efficiency method is reported for length separation of SWCNTs by modulating the concentrations of binary surfactants. The results demonstrate that long SWCNTs can spontaneously precipitate for binary-surfactant but not for single-surfactant systems. This effect is attributed to the formation of compound micelles by binary surfactants that squeeze the free space of long SWCNTs due to their large excluded volumes. With this technique, it can readily separate near-pure long (≥500 nm in length, 99% in content) and short (≤500 nm in length, 98% in content) SWCNTs with separation efficiencies of 26% and 64%, respectively, exhibiting markedly greater length resolution and separation efficiency than those of previously reported methods. Thin-film transistors fabricated from extracted semiconducting SWCNTs with lengths >500 nm exhibit significantly improved electrical properties, including a 10.5-fold on-state current and 14.7-fold mobility, compared with those with lengths <500 nm. The present length separation technique is perfectly compatible with various surfactant-based methods for structure separations of SWCNTs and is significant for fabrication of high-performance electronic and optoelectronic devices.

An efficient approach toward production of near-zigzag single-chirality carbon nanotubes

Synthesizing single-walled carbon nanotubes (SWCNTs) with a narrow chirality distribution is essential for obtaining pure chirality materials through postgrowth sorting techniques. Using carbon monoxide chemical vapor deposition, we devise a ruthenium (Ru) catalyst supported by silica for the bulk production of SWCNTs containing only a few (n, m) species. The result is attributed to the limited carbon dissociation on the supported Ru clusters, favoring the growth of only small-diameter SWCNTs at comparable growth rates. The resulting materials expedite high-purity single chirality separation using gel chromatography, leading to unprecedented yields of 3.5% for (9, 1) and 5.2% for (9, 2) nanotubes, which surpass those separated from HiPco SWCNTs by two orders of magnitude. This work sheds light on the large-quantity synthesis of SWCNTs with enriched species beyond near-armchair ones for their high-yield separation.

An optical aptamer-based cytokine nanosensor detects macrophage activation by bacterial toxins

Overactive or dysregulated cytokine expression is hallmark of many acute and chronic inflammatory diseases. This is true for acute or chronic infection, neurodegenerative diseases, autoimmune diseases, cardiovascular disease, cancer, and others. Cytokines such as interleukin-6 (IL-6) are known therapeutic targets and biomarkers for such inflammatory diseases. Platforms for cytokine detection are therefore desirable tools for both research and clinical applications. Single-walled carbon nanotubes (SWCNT) are versatile nanomaterials with near-infrared fluorescence that can serve as transducers for optical sensors. When functionalized with an analyte-specific recognition element, SWCNT emission may become sensitive and selective towards the desired target. SWCNT-aptamer sensors are easily assembled, inexpensive, and biocompatible. In this work, we introduced a nanosensor design based on SWCNT and a DNA aptamer specific to IL-6. We first evaluated several SWCNT-aptamer constructs based on this simple direct complexation method, wherein the aptamer both solubilizes the SWCNT and confers sensitivity to IL-6. The sensor limit of detection, 105 ng/mL, lies in the relevant range for pathological IL-6 levels. Upon investigation of sensor kinetics, we found rapid response within seconds of antigen addition which continued over the course of three hours. We found that this sensor construct is stable, and the aptamer is not displaced from the nanotube surface during IL-6 detection. Finally, we investigated the ability of this sensor construct to detect macrophage activation caused by bacterial lipopolysaccharides (LPS) in an in vitro model of disease, finding rapid and sensitive detection of macrophage-expressed IL-6. We are confident further development of this sensor will have novel implications for diagnosis of acute and chronic inflammatory diseases, in addition to contributing to the understanding of the role of cytokines in these diseases.

Integrated phase separation in microliter droplets for ultratrace-enriching biomarker analysis

Ultratrace-enriching biomarker analysis is an effective method for achieving highly accurate and enhanced sensitive detection. In this study, we have developed an enrichment detection platform by combining a minipillar array with an aqueous two-phase system (ATPS) for ultratrace enriching biomarker analysis. After optimizing the enrichment conditions of ATPS, target miRNAs at ultratrace levels specifically accumulate in the DEX-rich phase, which significantly increases the target miRNA concentration-related fluorescence intensity. Compared to non-enriched miRNA in the single-phase PEG solution, the detection limit of ATPS-enriched miRNA had improved more than 200-fold. The ATPS-based enrichment detection strategy offers a novel and convenient approach for the simultaneous detection of biomarkers with ultratrace.

Diameter-Dependent Competitive Adsorption of Sodium Dodecyl Sulfate and Single-Stranded DNA on Carbon Nanotubes

The equilibrium compositions of coatings on single-wall carbon nanotubes were spectroscopically deduced for samples dispersed in dilute sodium dodecyl sulfate (SDS) and then exposed to low concentrations of ssDNA oligomers. With all studied oligomers, displacement of the SDS tended to occur at lower ssDNA concentrations for smaller diameter nanotubes than for larger diameter ones. However, the behavior varied significantly with oligomer. For example, the diameter dependence was steeper for (TAT)4 than for (ATT)4, suggesting that interstrand head-to-tail hydrogen bonding interactions play a role in SWCNT wrapping. Concentrations of ssDNA in the range of several μg/mL displace SDS from nanotubes dispersed in 1500 μg/mL SDS solutions. This effect allows the use of coating exchange to prepare ssDNA dispersions with minimal oligomer costs. Another demonstrated use exploits the structure-dependent relative coating affinities in a simple filtration method for the diameter enrichment of SWCNT mixtures.

Sorting of Cluster-Confined Metallic Single-Walled Carbon Nanotubes for Fabricating Atomically Vacant Uranium Oxide

Single-walled carbon nanotube (SWCNT) heterostructures have shown great potential in catalysis, magnetism, and nanofluidics, in which host SWCNTs with certain conductivity (metallic or semiconducting) are highly required. Herein, inspired by the large molecular weight and redox properties of polyoxometalate (POM) clusters, we reported the selective separation of POM encapsulated metallic SWCNTs (POM@m-SWCNTs) with a uniform diameter through density gradient ultracentrifugation (DGU). The confined POMs increased the SWCNT density and amplified the nanotubes' density difference, thus greatly lowering the centrifugal force (70,000g) of DGU. With this strategy, a series of POM@m-SWCNTs of ∼1.2 nm with high purity were sorted. The mechanism supported by theoretical and experimental evidence showed that the separation of m-SWCNTs depended on not only nanotube/cluster size but also the conductivity of SWCNTs. The smallest 1.2 nm m-SWCNT that can exactly accommodate a 0.9 nm-{Mo6} cluster exhibited the maximum electron transfer to inner clusters; thus, intertube π-π stacking of such m-SWCNTs was greatly loosened, leading to the preferential dispersion into individual ones and partitioning in the uppermost layer after DGU. As a proof-of-concept application, this sorting strategy was extended to separate heavy-element 238U-encapsulated m-SWCNTs. The phase-pure, tiny (1-2.5 nm) U4O9 crystals with atomic vacancy clusters were fabricated on m-SWCNTs through growth kinetic control. This work may provide a general way to construct desired actinide materials on specific SWCNTs.

Kinetics of Single-Wall Carbon Nanotube Coating Displacement by Single-Stranded DNA Depends on Nanotube Structure

Time-resolved fluorescence spectroscopy has been used to study the displacement of adsorbed sodium dodecyl sulfate (SDS) from the surface of single-wall carbon nanotubes (SWCNTs) by short strands of single-stranded DNA. Intensity changes in near-infrared emission peaks of various SWCNT structures were analyzed following the addition of six different (GT)n oligomers (n from 3 to 20) to SDS-coated nanotube samples. There is a strong kinetic dependence on the oligomer length, with (GT)3 giving an initial rate more than 300 times greater than that of (GT)20. For shorter oligos in the (GT)n series, we observe an inverse dependence of the displacement rate on the SWCNT diameter, with SDS displaced from (6,5) more than twice as fast as from (8,7). However, this diameter dependence is reversed for oligos with more than six (GT) units. There is also a systematic dependence of the displacement rate on the nanotube chiral angle that is strongest for (GT)5, leading to a factor of ∼3 initial rate difference between (9,1) and (6,5) despite their identical diameters. To account for these findings, we propose a simple two-step kinetic model in which disruption of the original SDS coating is followed by conformational relaxation of ssDNA on the nanotube surface. The relaxation is relatively fast for ssDNA oligos shorter than 12 bp, making the first step rate-determining. Conversely, relaxation of the longer oligomers is slow enough that the second step becomes rate-determining.

Stochastic Formation of Quantum Defects in Carbon Nanotubes

Small perturbations in the structure of materials significantly affect their properties. One example is single wall carbon nanotubes (SWCNTs), which exhibit chirality-dependent near-infrared (NIR) fluorescence. They can be modified with quantum defects through the reaction with diazonium salts, and the number or distribution of these defects determines their photophysics. However, the presence of multiple chiralities in typical SWCNT samples complicates the identification of defect-related emission features. Here, we show that quantum defects do not affect aqueous two-phase extraction (ATPE) of different SWCNT chiralities into different phases, which suggests low numbers of defects. For bulk samples, the bandgap emission (E11) of monochiral (6,5)-SWCNTs decreases, and the defect-related emission feature (E11*) increases with diazonium salt concentration and represents a proxy for the defect number. The high purity of monochiral samples from ATPE allows us to image NIR fluorescence contributions (E11 = 986 nm and E11* = 1140 nm) on the single SWCNT level. Interestingly, we observe a stochastic (Poisson) distribution of quantum defects. SWCNTs have most likely one to three defects (for low to high (bulk) quantum defect densities). Additionally, we verify this number by following single reaction events that appear as discrete steps in the temporal fluorescence traces. We thereby count single reactions via NIR imaging and demonstrate that stochasticity plays a crucial role in the optical properties of SWCNTs. These results show that there can be a large discrepancy between ensemble and single particle experiments/properties of nanomaterials.

Enhancing Intracellular Optical Performance and Stability of Engineered Nanomaterials via Aqueous Two-Phase Purification

Supramolecular hybrids of DNA and single-walled carbon nanotubes (SWCNTs) have been introduced in numerous biosensing applications due to their unique optical properties. Recent aqueous two-phase (ATP) purification methods for SWCNTs have gained popularity by introducing specificity and homogeneity into the sensor design process. Using murine macrophages probed by near-infrared and Raman microscopies, we show that ATP purification increases the retention time of DNA-SWCNTs within cells while simultaneously enhancing the optical performance and stability of the engineered nanomaterial. Over a period of 6 h, we observe 45% brighter fluorescence intensity and no significant change in emission wavelength of ATP-purified DNA-SWCNTs relative to as-dispersed SWCNTs. These findings provide strong evidence of how cells differentially process engineered nanomaterials depending on their state of purification, lending to the future development of more robust and sensitive biosensors with desirable in vivo optical parameters using surfactant-based ATP systems with a subsequent exchange to biocompatible functionalization.

Green Approach for the Simultaneous Synthesis and Separation of Gold Nanoparticles

Gold nanoparticles (AuNPs) have diagnostic and therapeutic applications as they are biocompatible and can be surface-functionalized. The use of organic solvents in the synthesis of AuNPs hampers their applications in the medicinal field. The large-scale production of nanoparticles requires their simultaneous synthesis and separation. Self-assembly of nanoparticles at the fluid-fluid interface facilitates their separation from the bulk and eliminates a downstream processing step. In this work, we exploit this in an aqueous two-phase system (ATPS) to synthesize and separate stable AuNPs. The ATPS was based on polyethylene glycol (PEG) and trisodium citrate dihydrate (citrate) as both these compounds can reduce Au ions. After the synthesis of nanoparticles, using one of the solutes, a complementary solution containing the other solute is added to form a two-phase system to facilitate self-assembly at the interface. The nanoparticles synthesized in different phases are characterized using UV-visible spectroscopy, scanning electron microscopy, and transmission electron microscopy. The AuNPs synthesized using the citrate solution are found to be unstable. Particles synthesized using the ATPS with PEG-600 are trapped at the interface while those using PEG-6000 remain in the bulk. Continuous synthesis and separation of nanoparticles in slug flow in a millichannel are demonstrated as a first step for large-scale controlled synthesis.

Highly-Selective Harvesting of (6,4) SWCNTs Using the Aqueous Two-Phase Extraction Method and Nonionic Surfactants

Monochiral single-walled carbon nanotubes (SWCNTs) are indispensable for advancing the technology readiness level of nanocarbon-based concepts. In recent times, many separation techniques have been developed to obtain specific SWCNTs from raw unsorted materials to catalyze the development in this area. This work presents how the aqueous two-phase extraction (ATPE) method can be enhanced for the straightforward isolation of (6,4) SWCNTs in one step. Introducing nonionic surfactant into the typically employed mixture of anionic surfactants, which drive the partitioning, is essential to increasing the ATPE system's resolution. A thorough analysis of the parameter space by experiments and modeling reveals the underlying interactions between SWCNTs, surfactants, and phase-forming agents, which drive the partitioning. Based on new insight gained on this front, a separation mechanism is proposed. Notably, the developed method is highly robust, which is proven by isolating (6,4) SWCNTs from several raw SWCNT materials, including SWCNT waste generated over the years in the laboratory.

Up/Down Tuning of Poly(ionic liquid)s in Aqueous Two-Phase Systems

Thermally induced reversible up/down migration of poly(ionic liquid)s (PILs) in aqueous two-phase systems (ATPSs) was achieved for the first time in this study. Novel ATPSs were fabricated using azobenzene (Azo)- and benzyl (Bn)-modified PILs, and their upper and lower phases could be easily tuned using the grafting degree (GD) of the Azo and Bn groups. Bn-PIL with higher GD_Bn could go up into the upper phase and Azo-PIL come down to the lower phase when the temperature increased (>65 °C); this behavior was reversed at lower temperatures. Moreover, a reversible two-phase/single-phase transition was realized under UV irradiation. Experimental and simulation results revealed that the difference in the hydration capacity between Bn-PIL and Azo-PIL accounted for their unique phase-separation behavior. A versatile platform for fabricating ATPSs with tunable stimuli-responsive behavior can be realized based on our findings, which can broaden their applications in the fields of smart separation systems and functional material development.

Photochemical spin-state control of binding configuration for tailoring organic color center emission in carbon nanotubes

Incorporating fluorescent quantum defects in the sidewalls of semiconducting single-wall carbon nanotubes (SWCNTs) through chemical reaction is an emerging route to predictably modify nanotube electronic structures and develop advanced photonic functionality. Applications such as room-temperature single-photon emission and high-contrast bio-imaging have been advanced through aryl-functionalized SWCNTs, in which the binding configurations of the aryl group define the energies of the emitting states. However, the chemistry of binding with atomic precision at the single-bond level and tunable control over the binding configurations are yet to be achieved. Here, we explore recently reported photosynthetic protocol and find that it can control chemical binding configurations of quantum defects, which are often referred to as organic color centers, through the spin multiplicity of photoexcited intermediates. Specifically, photoexcited aromatics react with SWCNT sidewalls to undergo a singlet-state pathway in the presence of dissolved oxygen, leading to ortho binding configurations of the aryl group on the nanotube. In contrast, the oxygen-free photoreaction activates previously inaccessible para configurations through a triplet-state mechanism. These experimental results are corroborated by first principles simulations. Such spin-selective photochemistry diversifies SWCNT emission tunability by controlling the morphology of the emitting sites.

Chemical functionalization of the sidewalls of single-wall carbon nanotubes (SWCNTs) is an emerging route to introduce fluorescent quantum defects and tailor the emission properties. Here, authors demonstrate that spin-selective photochemistry diversifies SWCNT emission tunability by controlling the morphology of the emitting sites.

DNA-guided lattice remodeling of carbon nanotubes

Covalent modification of carbon nanotubes is a promising strategy for engineering their electronic structures. However, keeping modification sites in registration with a nanotube lattice is challenging. We report a solution using DNA-directed, guanine (G)-specific cross-linking chemistry. Through DNA screening we identify a sequence, C₃GC₇GC₃, whose reaction with an (8,3) enantiomer yields minimum disorder-induced Raman mode intensities and photoluminescence Stokes shift, suggesting ordered defect array formation. Single-particle cryo-electron microscopy shows that the C₃GC₇GC₃ functionalized (8,3) has an ordered helical structure with a 6.5 angstroms periodicity. Reaction mechanism analysis suggests that the helical periodicity arises from an array of G-modified carbon-carbon bonds separated by a fixed distance along an armchair helical line. Our findings may be used to remodel nanotube lattices for novel electronic properties.

Polyoxometalate steric hindrance driven chirality-selective separation of subnanometer carbon nanotubes

Subnanometer single-chirality single-walled carbon nanotubes (SWCNTs) are of particular interest in multiple applications. Inspired by the interdisciplinary combination of redox active polyoxometalates and SWCNTs, here we report a cluster steric hindrance strategy by assembling polyoxometalates on the outer surface of subnanometer SWCNTs via electron transfer and demonstrate the selective separation of monochiral (6,5) SWCNTs with a diameter of 0.75 nm by a commercially available conjugated polymer. The combined use of DFT calculations, TEM, and XPS unveils the mechanism that selective separation is associated with tube diameter-dependent interactions between the tube and clusters. Sonication drives the preferential detachment of polyoxometalate clusters from small-diameter (6,5) SWCNTs, attributable to weak tube-cluster interactions, which enables the polymer wrapping and separation of the released SWCNTs, while strong binding clusters with large-diameter SWCNTs provide steric hindrance and block the polymer wrapping. The polyoxometalate-assisted modulation, which can be rationally customized, provides a universal and robust pathway for the separation of SWCNTs.

Recent Advances in Structure Separation of Single-Wall Carbon Nanotubes and Their Application in Optics, Electronics, and Optoelectronics

Structural control of single-wall carbon nanotubes (SWCNTs) with uniform properties is critical not only for their property modulation and functional design but also for applications in electronics, optics, and optoelectronics. To achieve this goal, various separation techniques have been developed in the past 20 years through which separation of high-purity semiconducting/metallic SWCNTs, single-chirality species, and even their enantiomers have been achieved. This progress has promoted the property modulation of SWCNTs and the development of SWCNT-based optoelectronic devices. Here, the recent advances in the structure separation of SWCNTs are reviewed, from metallic/semiconducting SWCNTs, to single-chirality species, and to enantiomers by several typical separation techniques and the application of the corresponding sorted SWCNTs. Based on the separation procedure, efficiency, and scalability, as well as, the separable SWCNT species, purity, and quantity, the advantages and disadvantages of various separation techniques are compared. Combined with the requirements of SWCNT application, the challenges, prospects, and development direction of structure separation are further discussed.

Molecular dynamics simulations reveal single-stranded DNA (ssDNA) forms ordered structures upon adsorbing onto single-walled carbon nanotubes (SWCNT)

Replica exchange molecular dynamics were used to observe the adsorption of single-stranded DNA (ssDNA) onto the surface of single-walled carbon nanotubes (SWCNTs). The assembly of these systems has garnered interest as a method by which SWCNTs can be separated based on chirality. While the exact mechanism of separation is yet unknown, it is hypothesized that the structure of the ssDNA layer pays an important role. Characterization of such an adsorbed layer has been a matter of recent work with the focus being on atomic level detail or such as base-stacking and hydrogen bonding. In this manuscript, we detail a new observation of ssDNA organization and demonstrate how it can be used to infer additional information about the way in which such biopolymers wrap around the cylindrical SWCNT.

Machine Learning-Guided Systematic Search of DNA Sequences for Sorting Carbon Nanotubes

The prerequisite of utilizing DNA in sequence-dependent applications is to search specific sequences. Developing a strategy for efficient DNA sequence screening represents a grand challenge due to the countless possibilities of sequence combination. Herein, relying on sequence-dependent recognition between DNA and single-wall carbon nanotubes (SWCNTs), we demonstrate a method for systematic search of DNA sequences for sorting single-chirality SWCNTs. Different from previously documented empirical search, which has a low efficiency and accuracy, our approach combines machine learning and experimental investigation. The number of resolving sequences and the success rate of finding them are improved from ∼10² to ∼10³ and from ∼10% to >90%, respectively. Moreover, the resolving sequence patterns determined from 5-mer and 6-mer short sequences can be extended to sequence search in longer DNA subspaces.

Guanine-Specific Chemical Reaction Reveals ssDNA Interactions on Carbon Nanotube Surfaces

Understanding the conformations of physisorbed single-stranded DNA (ssDNA) oligos on single-wall carbon nanotube (SWCNT) surfaces is important for advancing basic nanoscience and for developing applications in biomedicine and quantum information processing. Here we report evidence that the ssDNA strands are partly desorbed from the nanotube surface under common conditions. SWCNT suspensions were prepared in eight ssDNA oligos, each containing 1 guanine and 30 thymine bases but differing in the position of the guanine within the strand. Singlet oxygen exposure then covalently functionalized the guanine to the SWCNT surface, red-shifting the nanotube fluorescence by an amount reflecting the guanine spatial density at the surface. Spectral shifts were greatest for central guanine positions and smallest for end positions. In conjunction with steered molecular dynamics simulations, the results suggest that steric interference between neighboring ssDNA strands on an individual nanotube causes significant dislocation or desorption of the strand ends while central regions remain better wrapped around the nanotube. This effect decreases with decreasing concentrations of free ssDNA.

Reconfiguring Organic Color Centers on the sp2 Carbon Lattice of Single-Walled Carbon Nanotubes

Organic color centers (OCCs) are atomic defects that can be synthetically created in single-walled carbon nanotube hosts to enable the emission of shortwave infrared single photons at room temperature. However, all known chemistries developed thus far to generate these quantum defects produce a variety of bonding configurations, posing a formidable challenge to the synthesis of identical, uniformly emitting color centers. Herein, we show that laser irradiation of the nanotube host can locally reconfigure the chemical bonding of aryl OCCs on (6,5) nanotubes to significantly reduce their spectral inhomogeneity. After irradiation the defect emission narrows in distribution by ∼26% to yield a single photoluminescence peak. We use hyperspectral photoluminescence imaging to follow this structural transformation on the single nanotube level. Density functional theory calculations corroborate our experimental observations, suggesting that the OCCs convert from kinetic structures to the more thermodynamically stable configuration. This approach may enable localized tuning and creation of identical OCCs for emerging applications in bioimaging, molecular sensing, and quantum information sciences.

Thermo-induced inversion of water-in-water emulsion stability by bis-hydrophilic microgels

HYPOTHESIS

Stabilization of water-in-water (W/W) emulsions resulting from the separation of polymeric phases such as dextran (DEX) and poly(ethyleneoxide) (PEO) is highly challenging, because of the very low interfacial tensions between the two phases and because of the interface thickness extending over several nanometers. In the present work, we present a new type of stabilizers, based on bis-hydrophilic, thermoresponsive microgels, incorporating in the same structure poly(N-isopropylacrylamide) (pNIPAM) chains having an affinity for the PEO phase and dextran moieties. We hypothesize that these particles allow better control of the stability of the W/W emulsions.

EXPERIMENTS

The microgels were synthesized by copolymerizing the NIPAM monomer with a multifunctional methacrylated dextran. They were characterized by dynamic light scattering, zeta potential measurements and nuclear magnetic resonance as a function of temperature. Microgels with different compositions were tested as stabilizers of droplets of the PEO phase dispersed in the DEX phase (P/D) or vice-versa (D/P), at different concentrations and temperatures.

FINDINGS

Only microgels with the highest DEX content revealed excellent stabilizing properties for the emulsions by adsorbing at the droplet surface, thus demonstrating the fundamental role of bis-hydrophilicity. At room temperature, both pNIPAM and DEX chains were swollen by water and stabilized better D/P emulsions. However, above the volume phase transition temperature (VPTT ≈ 32 °C) of pNIPAM the microgels shrunk and stabilized better P/D emulsions. At all temperatures, excess microgels partitioned more to the PEO phase. The change in structure and interparticle interaction induced by heating can be exploited to control the W/W emulsion stability.

Gel Chromatography for Separation of Single-Walled Carbon Nanotubes

Carbon nanotubes (CNTs), having either metallic or semiconducting properties depending on their chirality, are advanced materials that can be used for different devices and materials (e.g., fuel cells, transistors, solar cells, reinforced materials, and medical materials) due to their excellent electrical conductivity, mechanical strength, and thermal conductivity. Single-walled CNTs (SWNTs) have received special attention due to their outstanding electrical and optical properties; however, the inability to selectively synthesize specific types of CNTs has been a major obstacle for their commercialization. Therefore, researchers have studied different methods for the separation of SWNTs based on their electrical and optical properties. Gel chromatography methods enable the large-scale separation of metallic/semiconducting (m/s) SWNTs and single-chirality SWNTs with specific bandgaps. The core principle of gel chromatography-based SWNT separation is the interaction between the SWNTs and gels, which depends on the unique electrical properties of the former. Controlled pore glass, silica gel, agarose-based gel, and allyl dextran-based gel have been exploited as mediums for gel chromatography. In this paper, the interaction between SWNTs and gels and the different gel chromatography-based SWNT separation technologies are introduced. This paper can serve as a reference for researchers who plan to separate SWNTs with gel chromatography.

Selective separation of single-walled carbon nanotubes in aqueous solution by assembling redox nanoclusters

The selective separation of soluble and individual single-walled carbon nanotubes (SWCNTs) in aqueous solution is a key step for harnessing the extraordinary properties of these materials. Manipulating the strong van der Waals intertube interactions between the SWCNT bundles is very important in selective separation, which is a long-standing challenge. Here we reported the ability of redox polyoxometalate clusters to modulate the intertube π-π stacking interaction through electron transfer and achieved the diameter-selective separation of SWCNTs in a surfactant aqueous solution. The large-diameter SWCNTs concentrated at ∼1.3-1.4 nm were selectively separated when ∼1 nm clusters encapsulated within the tube cavity, and the dispersion of subnanometer ∼0.7-0.9 nm SWCNTs was boosted when clusters were adsorbed on the outer surface of small-diameter nanotubes. The mechanism of diameter-selective separation of SWCNTs associated with the size-dependent interaction between cluster-tubes and the steric hindrance effect of clusters was revealed by optical absorption and Raman spectroscopy. This simple method thus enables the selective separation of individual high-quality SWCNTs in aqueous solutions without harsh sonication with the potential for other separation applications.

Versatile Types of Inorganic/Organic NIR-IIa/IIb Fluorophores: From Strategic Design toward Molecular Imaging and Theranostics

In vivo imaging in the second near-infrared window (NIR-II, 1000-1700 nm), which enables us to look deeply into living subjects, is producing marvelous opportunities for biomedical research and clinical applications. Very recently, there has been an upsurge of interdisciplinary studies focusing on developing versatile types of inorganic/organic fluorophores that can be used for noninvasive NIR-IIa/IIb imaging (NIR-IIa, 1300-1400 nm; NIR-IIb, 1500-1700 nm) with near-zero tissue autofluorescence and deeper tissue penetration. This review provides an overview of the reports published to date on the design, properties, molecular imaging, and theranostics of inorganic/organic NIR-IIa/IIb fluorophores. First, we summarize the design concepts of the up-to-date functional NIR-IIa/IIb biomaterials, in the order of single-walled carbon nanotubes (SWCNTs), quantum dots (QDs), rare-earth-doped nanoparticles (RENPs), and organic fluorophores (OFs). Then, these novel imaging modalities and versatile biomedical applications brought by these superior fluorescent properties are reviewed. Finally, challenges and perspectives for future clinical translation, aiming at boosting the clinical application progress of NIR-IIa and NIR-IIb imaging technology are highlighted.

1D-2D Synergistic MXene-Nanotubes Hybrids for Efficient Perovskite Solar Cells

Incorporation of 2D MXenes into the electron transporting layer (ETL) of perovskite solar cells (PSCs) has been shown to deliver high-efficiency photovoltaic (PV) devices. However, the ambient fabrication of the ETLs leads to unavoidable deterioration in the electrical properties of MXene due to oxidation. Herein, sorted metallic single-walled carbon nanotubes (m-SWCNTs) are employed to prepare MXene/SWCNTs composites to improve the PV performance of PSCs. With the optimized composition, a power conversion efficiency of over 21% is achieved. The improved photoluminescence and reduced charge transfer resistance revealed by electrochemical impedance spectroscopy demonstrated low trap density and improved charge extraction and transport characteristics due to the improved conductivity originating from the presence of nanotubes as well as the reduced defects associated with oxygen vacancies on the surface of the SnO₂ . The MXene/SWCNTs strategy reported here provides a new avenue for realizing high-performance PSCs.

Single-Walled Carbon Nanotube Chiral Selectivity Exhibited by Commercially Available Hydrogels of Varying Composition

Despite the commercial availability of many different hydrogel formulations, the effective gel-based purification of single-walled carbon nanotubes (SWNT) remains exclusive to the gel Sephacryl S-200. In this study, 12 commercially available gels and two custom-synthesized gels were investigated for their ability to effectively purify SWNT, as determined through quantification of SWNT adsorption, elution, chiral selectivity, and overall process efficiency. The ability of each gel to separate SWNT was found to correlate with physiochemical properties, such as hydrogel pore size, the presence of ionic ligands, and both polysaccharide backbone and cross-linker compositions. While Sephacryl S-200 demonstrated superior separation efficiency and chiral selectivity among the gels studied, Superose 6 was found to adsorb more SWNT than Sephacryl S-200 per cm² of the gel surface area and exhibited a unique preference for the (7,3) and (7,5) SWNT chiralities, in contrast to the established selectivity of Sephacryl S-200 for the (6,5) chirality. Collectively, this work both identifies gels that exhibit unique SWNT chiral selectivity and provides insights into the rational design of gels tailored for SWNT purification.

Host-Guest Molecular Interaction Enabled Separation of Large-Diameter Semiconducting Single-Walled Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (s-SWCNTs) with a diameter of around 1.0-1.5 nm, which present bandgaps comparable to silicon, are highly desired for electronic applications. Therefore, the preparation of s-SWCNTs of such diameters has been attracting great attention. The inner surface of SWCNTs has a suitable curvature and large contacting area, which is attractive in host-guest chemistry triggered by electron transfer. Here we reported a strategy of host-guest molecular interaction between SWCNTs and inner clusters with designed size, thus selectively separating s-SWCNTs of expected diameters. When polyoxometalate clusters of ∼1 nm in size were filled in the inner cavities of SWCNTs, s-SWCNTs with diameters concentrated at ∼1.3-1.4 nm were selectively extracted with the purity of ∼98% by a commercially available polyfluorene derivative. The field-effect transistors built from the sorted s-SWCNTs showed a typical behavior of semiconductors. The sorting mechanisms associated with size-dependent electron transfer from nanotubes to inner polyoxometalate were revealed by the spectroscopic and in situ electron microscopic evidence as well as the theoretical calculation. The polyoxometalates with designable size and redox property enable the flexible regulation of interaction between the nanotubes and the clusters, thus tuning the diameter of sorted s-SWCNTs. The present sorting strategy is simple and should be generally feasible in other SWCNT sorting techniques, bringing both great easiness in dispersant design and improved selectivity.

DNA-Directed Assembly of Carbon Nanotube-Protein Hybrids

Here, we report the controlled assembly of SWCNT–GFP hybrids employing DNA as a linker. Two distinct, enriched SWCNTs chiralities, (6,5), (7,6), and an unsorted SWCNT solution, were selectively functionalized with DNA and hybridized to a complementary GFP^DNA conjugate. Atomic force microscopy images confirmed that GFP attachment occurred predominantly at the terminal ends of the nanotubes, as designed. The electronic coupling of the proteins to the nanotubes was confirmed via in-solution fluorescence spectroscopy, that revealed an increase in the emission intensity of GFP when linked to the CNTs.

En route to single-step, two-phase purification of carbon nanotubes facilitated by high-throughput spectroscopy

Chirality purification of single-walled carbon nanotubes (SWCNTs) is desirable for applications in many fields, but general utility is currently hampered by low throughput. We discovered a method to obtain single-chirality SWCNT enrichment by the aqueous two-phase extraction (ATPE) method in a single step. To achieve appropriate resolution, a biphasic system of non-ionic tri-block copolymer surfactant is varied with an ionic surfactant. A nearly-monochiral fraction of SWCNTs can then be harvested from the top phase. We also found, via high-throughput, near-infrared excitation-emission photoluminescence spectroscopy, that the parameter space of ATPE can be mapped to probe the mechanics of the separation process. Finally, we found that optimized conditions can be used for sorting of SWCNTs wrapped with ssDNA as well. Elimination of the need for surfactant exchange and simplicity of the separation process make the approach promising for high-yield generation of purified single-chirality SWCNT preparations.

Controlled Formation of All-Aqueous Janus Droplets by Liquid-Liquid Phase Separation of an Aqueous Three-Phase System

Janus droplets have been demonstrated in a wide range of applications, ranging from drug delivery, to biomedical imaging, to bacterial detection. However, existing fabrication strategies often involve nonaqueous solvents, such as organic solvent or oil, which largely limits their use in fields that require a high degree of biocompatibility. Here, we present a method to achieve all-aqueous Janus droplets by liquid-liquid phase separation of an aqueous three-phase system (A3PS). An aqueous droplet containing two initially miscible polymers is first injected into an aqueous solution of another concentrated polymer, and then it spontaneously phase-separates into a Janus droplet due to the diffusive mass exchange between the drop and bulk phases during equilibration. To achieve continuous generation of the Janus droplets, the A3PS is further integrated with microfluidics and electrospray. The size and shape of the phase-separated Janus droplets can be easily controlled by tuning the operation parameters, such as the flow rate and/or the initial composition of the drop phases. Dumbbell-shaped and snowman-shaped Janus droplets with average sizes between 100 and 400 μm can be generated by both coflow microfluidics and electrospray. In particular, the phase-separated Janus droplets can simultaneously load two different liposomes into each compartment, which are promising carriers for combination drugs. The obtained Janus droplets are superior templates for biocompatible materials, which can serve as building blocks such as high-order droplet patterns for constructing advanced biomaterials.

A flavin-Cu2+ supramolecular complex for highly selective sorting of semiconducting single-walled carbon nanotubes with specific chiralities

We introduce thio-substituents at the 7- and 8-positions of a flavin analogue, which allows for the coordination of metal ions, and demonstrate, based on both experimental and theoretical methods, that the formed Cu²⁺-based supramolecular assembled complex shows very high selective sorting of semiconducting single-walled carbon nanotubes with (8,6)- and (9,4)-chiralities.

Chirality-Enriched Carbon Nanotubes for Next-Generation Computing

For the past half century, silicon has served as the primary material platform for integrated circuit technology. However, the recent proliferation of nontraditional electronics, such as wearables, embedded systems, and low-power portable devices, has led to increasingly complex mechanical and electrical performance requirements. Among emerging electronic materials, single-walled carbon nanotubes (SWCNTs) are promising candidates for next-generation computing as a result of their superlative electrical, optical, and mechanical properties. Moreover, their chirality-dependent properties enable a wide range of emerging electronic applications including sub-10 nm complementary field-effect transistors, optoelectronic integrated circuits, and enantiomer-recognition sensors. Here, recent progress in SWCNT-based computing devices is reviewed, with an emphasis on the relationship between chirality enrichment and electronic functionality. In particular, after highlighting chirality-dependent SWCNT properties and chirality enrichment methods, the range of computing applications that have been demonstrated using chirality-enriched SWCNTs are summarized. By identifying remaining challenges and opportunities, this work provides a roadmap for next-generation SWCNT-based computing.

Dye Quenching of Carbon Nanotube Fluorescence Reveals Structure-Selective Coating Coverage

Many properties and applications of single-wall carbon nanotubes (SWCNTs) depend strongly on the coatings that allow their suspension in aqueous media. We report that SWCNT fluorescence is quenched by reversible physisorption of dye molecules such as methylene blue, and that measurements of that quenching can be used to infer structure-specific exposures of the nanotube surface to the surrounding solution. SWCNTs suspended in single-stranded DNA oligomers show quenching dependent on the combination of nanotube structure and ssDNA base sequence. Several sequences are found to give notably high or low surface coverages for specific SWCNT species. These effects seem correlated with the selective recognitions used for DNA-based structural sorting of nanotubes. One notable example is that dye quenching of fluorescence from SWCNTs coated with the (ATT)₄ base sequence is far stronger for one (7,5) enantiomer than for the other, showing that coating coverage is associated with the coating affinity difference reported previously for this system. Equilibrium modeling of quenching data has been used to extract parameters for comparative complexation constants and accessible surface areas. Further insights are obtained from molecular dynamics simulations, which give estimated contact areas between ssDNA and SWCNTs that correlate with experimentally inferred surface exposures and account for the enantiomeric discrimination of (ATT)₄.

Thermoelectric Properties of Thin Films from Sorted Single-Walled Carbon Nanotubes

Single-walled carbon nanotubes (SWCNTs) remain one of the most promising materials of our times. One of the goals is to implement semiconducting and metallic SWCNTs in photonics and microelectronics, respectively. In this work, we demonstrated how such materials could be obtained from the parent material by using the aqueous two-phase extraction method (ATPE) at a large scale. We also developed a dedicated process on how to harvest the SWCNTs from the polymer matrices used to form the biphasic system. The technique is beneficial as it isolates SWCNTs with high purity while simultaneously maintaining their surface intact. To validate the utility of the metallic and semiconducting SWCNTs obtained this way, we transformed them into thin free-standing films and characterized their thermoelectric properties.

Carbohydrate- and Chain Length-Controlled Complexation of Carbon Nanotubes by Glycopolymers

Stable dispersions of single-wall carbon nanotubes (SWCNTs) by biopolymers in an aqueous environment facilitate their potential biological and biomedical applications. In this report, we investigated a small library of precision synthesized glycopolymers with monosaccharide and disaccharide groups for stabilizing SWCNTs via noncovalent complexation in aqueous conditions. Among the glycopolymers tested, disaccharide lactose-containing glycopolymers demonstrate effective stabilization of SWCNTs in water, which strongly depends on carbohydrate density and polymer chain length as well. The introduction of disaccharide lactose potentially makes glycopolymers less flexible as compared to those containing monosaccharide and facilitates the wrapping conformation of polymers on the surface of SWCNTs while preserving intrinsic photoluminescence of nanotubes in the near-infrared region. This work demonstrates the synergistic effects of the identity of carbohydrate pendant groups and polymer chain length of glycopolymers on stabilizing SWCNTs in water, which has not been achieved previously.

Supramolecular Chemistry-Based One-Pot High-Efficiency Separation of Solubilizer-Free Pure Semiconducting Single-Walled Carbon Nanotubes: Molecular Strategy and Mechanism

Single-walled carbon nanotubes (SWCNTs) have the potential to revolutionize nanoscale electronics and power sources; however, their low purity and high separation cost limit their use in practical applications. Here we present a supramolecular chemistry-based one-pot, less expensive, scalable, and highly efficient separation of a solubilizer/adsorbent-free pure semiconducting SWCNT (sc-SWCNT) using flavin/isoalloxazine analogues with different substituents. On the basis of both experimental and computational simulations (DFT study), we have revealed the molecular requirements of the solubilizers as well as provided a possible mechanism for such a highly efficient selective sc-SWCNT separation. The present sorting method is very simple (one-pot) and gives a promising sc-SWCNT separation methodology. Thus, the study provides insight for the molecular design of an sc-SWCNT solubilizer with a high (n,m)-chiral selectivity, which benefits many areas including semiconducting nanoelectronics, thermoelectric, bio and energy materials, and devices using solubilizer-free very pure sc-SWCNTs.

One-step sorting of single-walled carbon nanotubes using aqueous two-phase extraction in the presence of basic salts

We demonstrate a simple one-step approach to separate (6,5) CNTs from raw material by using the aqueous two-phase extraction method. To reach this goal, stable and inexpensive K2CO3, Na2CO3, Li2CO3, and K3PO4 basic salts are used as modulators of the differentiation process. Under the appropriate parameters, near monochiral fractions become available for straightforward harvesting. In parallel, we show that the isolation process is strongly affected not only by pH but by the inherent nature of the introduced chemical species as well. The results of our study also reveal that the commonly used ingredients of the biphasic system make a strong contribution to the course of the separation by having far from neutral pH values themselves.

Long-term in vivo biocompatibility of single-walled carbon nanotubes

Over the past two decades, measurements of carbon nanotube toxicity and biodistribution have yielded a wide range of results. Properties such as nanotube type (single-walled vs. multi-walled), purity, length, aggregation state, and functionalization, as well as route of administration, greatly affect both the biocompatibility and biodistribution of carbon nanotubes. These differences suggest that generalizable conclusions may be elusive and that studies must be material- and application-specific. Here, we assess the short- and long-term biodistribution and biocompatibility of a single-chirality DNA-encapsulated single-walled carbon nanotube complex upon intravenous administration that was previously shown to function as an in-vivo reporter of endolysosomal lipid accumulation. Regarding biodistribution and fate, we found bulk specificity to the liver and >90% signal attenuation by 14 days in mice. Using near-infrared hyperspectral microscopy to measure single nanotubes, we found low-level, long-term persistence in organs such as the heart, liver, lung, kidney, and spleen. Measurements of histology, animal weight, complete blood count; biomarkers of organ function all suggest short- and long-term biocompatibility. This work suggests that carbon nanotubes can be used as preclinical research tools in-vivo without affecting acute or long-term health.

Chirality Pure Carbon Nanotubes: Growth, Sorting, and Characterization

Single-walled carbon nanotubes (SWCNTs) have been attracting tremendous attention owing to their structure (chirality) dependent outstanding properties, which endow them with great potential in a wide range of applications. The preparation of chirality-pure SWCNTs is not only a great scientific challenge but also a crucial requirement for many high-end applications. As such, research activities in this area over the last two decades have been very extensive. In this review, we summarize recent achievements and accumulated knowledge thus far and discuss future developments and remaining challenges from three aspects: controlled growth, postsynthesis sorting, and characterization techniques. In the growth part, we focus on the mechanism of chirality-controlled growth and catalyst design. In the sorting part, we organize and analyze existing literature based on sorting targets rather than methods. Since chirality assignment and quantification is essential in the study of selective preparation, we also include in the last part a comprehensive description and discussion of characterization techniques for SWCNTs. It is our view that even though progress made in this area is impressive, more efforts are still needed to develop both methodologies for preparing ultrapure (e.g., >99.99%) SWCNTs in large quantity and nondestructive fast characterization techniques with high spatial resolution for various nanotube samples.