Role of Exposed Metal Sites in Hydrogen Storage in MOFs

A review on MOFs synthesis and effect of their structural characteristics for hydrogen adsorption

Climate change is causing a rise in the need to transition from fossil fuels to renewable and clean energy such as hydrogen as a sustainable energy source. The issue with hydrogen's practical storage, however, prevents it from being widely used as an energy source. Current solutions, such as liquefied and compressed hydrogen storage, are insufficient to meet the U.S. Department of Energy's (US DOE) extensive on-board application requirements. Thus, a backup strategy involving material-based storage is required. Metal organic frameworks (MOFs) belong to the category of crystalline porous materials that have seen rapid interest in the field of energy storage due to their large surface area, high pore volume, and modifiable structure. Therefore, advanced technologies employed in the construction of MOFs, such as solvothermal, mechanochemical, microwave assisted, and sonochemical methods are reviewed. Finally, this review discussed the selected factors and structural characteristics of MOFs, which affect the hydrogen capacity.

Three-Dimensional Visualization of Adsorption Distribution in a Single Crystalline Particle of a Metal-Organic Framework

Many unique adsorption properties of metal-organic frameworks (MOFs) have been revealed by diffraction crystallography, visualizing their vacant and guest-loaded crystal structures at the molecular scale. However, it has been challenging to see the spatial distribution of the adsorption behaviors throughout a single MOF particle in a transient equilibrium state. Here, we report three-dimensional (3D) visualization of molecular adsorption behaviors in a single crystalline particle of a MOF by in situ X-ray absorption fine structure spectroscopy combined with computed tomography for the first time. The 3D maps of water-coordinated Co sites in a 100 μm-scale MOF-74-Co crystal were obtained with 1 μm spatial resolution under several water vapor pressures. Through the visualization of the water vapor adsorption process, 3D spectroimaging revealed the mechanism and spatial heterogeneity of guest adsorption inside a single particle of a crystalline MOF.

Electrochemiluminescent bioassay based on Ru@Zr-BTC-MOFs nanoparticles for determination of let-7a miRNA using the hybridization chain reaction

Carboxyl-rich tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) ([Ru(dcbpy)3]2+) and 1,3,5-phenyl tricarboxylic acid (H3BTC) were used as the organic ligand to synthesize the metal-organic frameworks by a simple one-pot hydrothermal method with ZrCl4 as metal ion source. Subsequently, the excellent electrochemiluminescence (ECL) luminophore (denoted as Ru@Zr-BTC-MOFs) was obtained. The Ru@Zr-BTC-MOFs displayed outstanding ECL properties, and a sensitive ECL bioassay based on Ru@Zr-BTC-MOFs was designed for the detection of let-7a microRNA (miRNA) using hybrid chain reaction (HCR). Under the optimal experimental conditions, the proposed bioassay exhibited a good linear relationship in the range from 50.0 fM to 5.00 × 102 pM with a detection limit of 3.71 fM. Besides, the proposed sensor exhibited satisfactory performance in real samples. The recovery was 91 ~ 108%, and the relative standard deviation was less than 5.6%. It might have potential clinical applications for detecting miRNA in biomedical research and clinical diagnosis. The schematic diagram of the preparation of Ru@Zr-BTC-MOFs (a) and ECL sensor for detecting let -7a (b).

Air-Stable Cu(I) Metal-Organic Framework for Hydrogen Storage

Metal-organic frameworks (MOFs) that contain open metal sites have the potential for storing hydrogen (H2) at ambient temperatures. In particular, Cu(I)-based MOFs demonstrate very high isosteric heats of adsorption for hydrogen relative to other reported MOFs with open metal sites. However, most of these Cu(I)-based MOFs are not stable in ambient conditions since the Cu(I) species display sensitivity toward moisture and can rapidly oxidize in air. As a result, researchers have focused on the synthesis of new air-stable Cu(I)-based materials for H2 storage. Here, we have developed a de novo synthetic strategy to generate a robust Cu(I)-based MOF, denoted as NU-2100, using a mixture of Cu/Zn precursors in which zinc acts as a catalyst to transform an intermediate MOF into NU-2100 without getting incorporated into the final MOF structure. NU-2100 is air-stable and displays one of the initial highest isosteric heats of adsorption (32 kJ/mol) with good hydrogen storage capability under ambient conditions (10.4 g/L, 233 K/100 bar to 296 K/5 bar). We further elucidated the H2 storage performance of NU-2100 using a combination of spectroscopic analysis and computational modeling studies. Overall, this new synthetic route may enable the design of additional stable Cu(I)-MOFs for next-generation hydrogen storage adsorbents at ambient temperatures.

Direct observation of highly effective hydrogen isotope separation at active metal sites by in situ DRIFT spectroscopy

In situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy was developed for the first time to observe the hydrogen isotope separation behavior at active Cu^I sites within Cu^I-MFU-4l, and clear evidence of the preferential adsorption of D₂ over H₂ was directly captured. More importantly, our results show direct spectral proof to clarify the chemical affinity quantum sieving mechanism of hydrogen isotope separation within porous adsorbents.

Research on Improved MOF Materials Modified by Functional Groups for Purification of Water

With the rapid development of urbanization and industrialization, water contamination has gradually become a big problem. Relevant studies show that adsorption is an efficient strategy to treat pollutants in water. MOFs are a class of porous materials with a three-dimensional frame structure shaped by the self-assembly of metal centers and organic ligands. Because of its unique performance advantages, it has become a promising adsorbent. At present, single MOFs cannot meet the needs, but the introduction of familiar functional groups on MOFs can promote the adsorption performance of MOFs on the target. In this review, the main advantages, adsorption mechanism, and specific applications of various functional MOF adsorbents for pollutants in water are reviewed. At the end of the article, we summarize and discuss the future development direction.

Highly Effective H2/D2 Separation within the Stable Cu(I)Cu(II)-BTC: The Effect of Cu(I) Structure on Quantum Sieving

Realizing ideal deuterium separation from isotopic mixtures remains a daunting challenge because of their almost identical sizes, shapes, and physicochemical properties. Using the quantum sieving effect in porous materials with suitable pore size and open metal sites (OMSs) enables efficient hydrogen isotope separation. Herein, synthetic HKUST-1-derived microporous mixed-valence Cu(I)Cu(II)-BTC (BTC = benzene-1,3,5-tricarboxylate), featuring a unique network of distinct Cu(I) and Cu(II) coordination sites, can remarkably boost the D₂/H₂ isotope separation, which has a high selectivity (S_D2/H2) of 37.9 at 30 K, in comparison with HKUST-1 and other porous materials. Density functional theory (DFT) calculations indicate that the introduction of Cu(I) macrocycles in the framework decreases the pore size and further leads to relatively enhanced interaction of H₂/D₂ molecules on Cu(II) sites. The significantly enhanced selectivity of Cu(I)Cu(II)-BTC at 30 K can be mainly attributed to the synergistic effect of kinetic quantum sieving (KQS) and chemical affinity quantum sieving (CAQS). The results reveal that Cu(I) OMSs exhibit counterintuitive behaviors and play a crucial role in tuning quantum sieving without a complex structural design, which provides a deeper insight into quantum sieving mechanisms and a new strategy for the intelligent design of highly efficient isotope systems.

Metal-organic frameworks-based biosensor for microRNA detection in prostate cancer cell lines

In this research, a novel dye-labeled probe (FAM-Probe) based on a nano metal-organic framework (NMOF) functionalized with folate (NMOF-FA) was prepared and applied as a fluorescent sensing platform for the recognition of intracellular microRNA (miRNA-21) in DU145, PC3, and LNCaP cancer cells. The NMOF-FA can be easily assembled with a dye-labeled miR-21 probe (FAM-Probe21), causing an efficient fluorescence quenching of fluorescence of FAM fluorophore. The probe can be specifically catch up by cancerous cells through targeting their folate receptor by folic acid on the FAM-Probe21-NMOF-FA complex. Upon the interaction of the FAM-Probe21-NMOF-FA with complementary miRNA (miR-21), the fluorescence intensity can be recovered, providing a specific system to detect miRNAs in prostate cancer cells. We used the proposed probe for cell-specific intracellular miRNA-21 sensing, following the alteration expression level of miRNA-21 inside living cells. Thus, the FAM-Probe21-NMOF-FA complex can be used as a new miRNA sensing method in biomedicine studies.

Survey on Adsorption of Low Molecular Weight Compounds in Cu-BTC Metal-Organic Framework: Experimental Results and Thermodynamic Modeling

This contribution aims at providing a critical overview of experimental results for the sorption of low molecular weight compounds in the Cu-BTC Metal-Organic Framework (MOF) and of their interpretation using available and new, specifically developed, theoretical approaches. First, a literature review of experimental results for the sorption of gases and vapors is presented, with particular focus on the results obtained from vibrational spectroscopy techniques. Then, an overview of theoretical models available in the literature is presented starting from semiempirical theoretical approaches suitable to interpret the adsorption thermodynamics of gases and vapors in Cu-BTC. A more detailed description is provided of a recently proposed Lattice Fluid approach, the Rigid Adsorbent Lattice Fluid (RALF) model. In addition, to deal with the cases where specific self- and cross-interactions (e.g., H-bonding, Lewis acid/Lewis base interactions) play a role, a modification of the RALF model, i.e., the RALFHB model, is introduced here for the first time. An extension of both RALF and RALFHB is also presented to cope with the cases in which the heterogeneity of the rigid adsorbent displaying a different kind of adsorbent cages is of relevance, as it occurs for the adsorption of some low molecular weight substances in Cu-BTC MOF.

Porous Metal-Organic Frameworks for Hydrogen Storage

The high gravimetric energy density and environmental benefit place hydrogen as a promising alternative to the widely used fossil fuel, which is however impeded by the lack of safe, energy-saving...

Observation of an Intermediate to H2 Binding in a Metal-Organic Framework

Coordinatively unsaturated metal sites within certain zeolites and metal-organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H₂ at the trigonal pyramidal Cu⁺ sites in the metal-organic framework Cu^I-MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu⁺ coordination environment that enhances π-backbonding with H₂. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

Atomic Clusters: Structure, Reactivity, Bonding, and Dynamics

Atomic clusters lie somewhere in between isolated atoms and extended solids with distinctly different reactivity patterns. They are known to be useful as catalysts facilitating several reactions of industrial importance. Various machine learning based techniques have been adopted in generating their global minimum energy structures. Bond-stretch isomerism, aromatic stabilization, Rener-Teller effect, improved superhalogen/superalkali properties, and electride characteristics are some of the hallmarks of these clusters. Different all-metal and nonmetal clusters exhibit a variety of aromatic characteristics. Some of these clusters are dynamically stable as exemplified through their fluxional behavior. Several of these cluster cavitands are found to be agents for effective confinement. The confined media cause drastic changes in bonding, reactivity, and other properties, for example, bonding between two noble gas atoms, and remarkable acceleration in the rate of a chemical reaction under confinement. They have potential to be good hydrogen storage materials and also to activate small molecules for various purposes. Many atomic clusters show exceptional opto-electronic, magnetic, and nonlinear optical properties. In this Review article, we intend to highlight all these aspects.

Recent advances in catalytic systems in the prism of physicochemical properties to remediate toxic CO pollutants: A state-of-the-art review

Carbon monoxide (CO) is the most harmful pollutant in the air, causing environmental issues and adversely affecting humans and the vegetation and then raises global warming indirectly. CO oxidation is one of the most effective methods of reducing CO by converting it into carbon dioxide (CO₂) using a suitable catalytic system, due to its simplicity and great value for pollution control. The CO oxidation reaction has been widely studied in various applications, including proton-exchange membrane fuel cell technology and catalytic converters. CO oxidation has also been of great academic interest over the last few decades as a model reaction. Many review studies have been produced on catalysts development for CO oxidation, emphasizing noble metal catalysts, the configuration of catalysts, process parameter influence, and the deactivation of catalysts. Nevertheless, there is still some gap in a state of the art knowledge devoted exclusively to synergistic interactions between catalytic activity and physicochemical properties. In an effort to fill this gap, this analysis updates and clarifies innovations for various latest developed catalytic CO oxidation systems with contemporary evaluation and the synergistic relationship between oxygen vacancies, strong metal-support interaction, particle size, metal dispersion, chemical composition acidity/basicity, reducibility, porosity, and surface area. This review study is useful for environmentalists, scientists, and experts working on mitigating the harmful effects of CO on both academic and commercial levels in the research and development sectors.

Formic Acid as a Potential On-Board Hydrogen Storage Method: Development of Homogeneous Noble Metal Catalysts for Dehydrogenation Reactions

Hydrogen can be used as an energy carrier for renewable energy to overcome the deficiency of its intrinsically intermittent supply. One of the most promising application of hydrogen energy is on-board hydrogen fuel cells. However, the lack of a safe, efficient, convenient, and low-cost storage and transportation method for hydrogen limits their application. The feasibility of mainstream hydrogen storage techniques for application in vehicles is briefly discussed in this Review. Formic acid (FA), which can reversibly be converted into hydrogen and carbon dioxide through catalysis, has significant potential for practical application. Historic developments and recent examples of homogeneous noble metal catalysts for FA dehydrogenation are covered, and the catalysts are classified based on their ligand types. The Review primarily focuses on the structure-function relationship between the ligands and their reactivity and aims to provide suggestions for designing new and efficient catalysts for H₂ generation from FA.

Nanoporous Metal Phosphonate Hybrid Materials as a Novel Platform for Emerging Applications: A Critical Review

Nanoporous metal phosphonates are propelling the rapid development of emerging energy storage, catalysis, environmental intervention, and biology, the performances of which touch many fundamental aspects of portable electronics, convenient transportation, and sustainable energy conversion systems. Recent years have witnessed tremendous research breakthroughs in these fields in terms of the fascinating pore properties, the structural periodicity, and versatile skeletons of porous metal phosphonates. This review presents recent milestones of porous metal phosphonate research, from the diversified synthesis strategies for controllable pore structures, to several important applications including adsorption and separation, energy conversion and storage, heterogeneous catalysis, membrane engineering, and biomaterials. Highlights of porous structure design for metal phosphonates are described throughout the review and the current challenges and perspectives for future research in this field are discussed at the end. The aim is to provide some guidance for the rational preparation of porous metal phosphonate materials and promote further applications to meet the urgent demands in emerging applications.

Ambient-Temperature Hydrogen Storage via Vanadium(II)-Dihydrogen Complexation in a Metal-Organic Framework

The widespread implementation of H2 as a fuel is currently hindered by the high pressures or cryogenic temperatures required to achieve reasonable storage densities. In contrast, the realization of materials that strongly and reversibly adsorb hydrogen at ambient temperatures and moderate pressures could transform the transportation sector and expand adoption of fuel cells in other applications. To date, however, no adsorbent has been identified that exhibits a binding enthalpy within the optimal range of -15 to -25 kJ/mol for ambient-temperature hydrogen storage. Here, we report the hydrogen adsorption properties of the metal-organic framework (MOF) V2Cl2.8(btdd) (H2btdd, bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin), which features exposed vanadium(II) sites capable of backbonding with weak π acids. Significantly, gas adsorption data reveal that this material binds H2 with an enthalpy of -21 kJ/mol. This binding energy enables usable hydrogen capacities that exceed that of compressed storage under the same operating conditions. The Kubas-type vanadium(II)-dihydrogen complexation is characterized by a combination of techniques. From powder neutron diffraction data, a V-D2(centroid) distance of 1.966(8) Å is obtained, the shortest yet reported for a MOF. Using in situ infrared spectroscopy, the H-H stretch was identified, and it displays a red shift of 242 cm-1. Electronic structure calculations show that a main contribution to bonding stems from the interaction between the vanadium dπ and H2 σ* orbital. Ultimately, the pursuit of MOFs containing high densities of weakly π-basic metal sites may enable storage capacities under ambient conditions that far surpass those accessible with compressed gas storage.

Mixed-Metal Cu-BTC Metal-Organic Frameworks as a Strong Adsorbent for Molecular Hydrogen at Low Temperatures

The advancement of hydrogen and fuel cell technologies hinges on the development of hydrogen storage methods. Metal-organic frameworks (MOFs) are one of the most favorable materials for hydrogen storage. In this study, we synthesized a series of isostructural mixed-metal metal-organic frameworks (MM-MOFs) of 1,3,5-benzenetricarboxylate (BTC), M-Cu-BTC, where M = Zn²⁺, Ni²⁺, Co²⁺, and Fe²⁺ using the post-synthetic exchange (PSE) method with metal ions. The powder X-ray diffraction patterns of MM-MOFs were similar with those of single-metal Cu-BTC. Scanning electron microscopy indicates the absence of amorphous phases. Inductively coupled plasma mass spectroscopy of the MM-MOFs shows successful metal exchanges using the PSE method. The N₂ adsorption measurements confirmed the successful synthesis of porous MM-MOFs. The metal exchanged materials Ni-Cu-BTC, Zn-Cu-BTC, Fe-Cu-BTC, and Co-Cu-BTC were studied for hydrogen storage and showed a gravimetric uptake of 1.6, 1.63, 1.63, and 1.12 wt %; respectively. The increase in hydrogen adsorption capacity for the three metal exchanged materials is about 60% relative to that of the parent MOF (Cu-BTC). The improvement of gravimetric uptake in M-Cu-BTC (where M = Ni²⁺, Zn²⁺, and Fe²⁺) is probably due to the increase in binding enthalpy of H₂ with the unsaturated metal sites after the partial exchange from Cu²⁺ to other metal ions. The higher charge density of metal ions strongly polarizes hydrogen and provides the primary binding sites inside the pores of Cu-BTC and subsequently enhances the gravimetric uptake of hydrogen.

Effect of Larger Pore Size on the Sorption Properties of Isoreticular Metal-Organic Frameworks with High Number of Open Metal Sites

Four isostructural CPO‐54‐M metal‐organic frameworks based on the larger organic linker 1,5‐dihydroxynaphthalene‐2,6‐dicarboxylic acid and divalent cations (M=Mn, Mg, Ni, Co) are shown to be isoreticular to the CPO‐27 (MOF‐74) materials. Desolvated CPO‐54‐Mn contains a very high concentration of open metal sites, which has a pronounced effect on the gas adsorption of N₂, H₂, CO₂ and CO. Initial isosteric heats of adsorption are significantly higher than for MOFs without open metal sites and are slightly higher than for CPO‐27. The plateau of high heat of adsorption decreases earlier in CPO‐54‐Mn as a function of loading per mole than in CPO‐27‐Mn. Cluster and periodic density functional theory based calculations of the adsorbate structures and energetics show that the larger adsorption energy at low loadings, when only open metal sites are occupied, is mainly due to larger contribution of dispersive interactions for the materials with the larger, more electron rich bridging ligand.

Efficient Separation of Nucleic Acids with Different Secondary Structures by Metal-Organic Frameworks

We report the use of metal-organic frameworks (MOFs) for the selective separation of nucleic acids (DNA and RNA) with different secondary structures through size, shape, length, and capability of conformational transition. Three MOFs with precisely controlled pore environments, Co-IRMOF-74-II, -III, and -IV, composed of Co²⁺ and organic linkers (II, III, and IV), respectively, were used for the inclusion of nucleic acid into their pores from the solution. This was proven to be a spontaneous process from disordered free state to restricted ordered state via circular dichroism (CD) spectroscopy. Three critical factors were identified for their inclusion: (1) size selection induced by steric hindrance, (2) conformation transition energy selection induced by stability, and (3) molecular weight selection. These selection rules were used to extract nucleic acids with flexible and unstable secondary structures from complex mixtures of multiple nucleic acids, leaving those with rigid and stable secondary structures in the mother liquor. This provides the possibility to separate and enrich nucleic acids in bulk through their different structure feature, which is highly desirable in genome-wide structural measurement of nucleic acids. Unlike methods that rely on specific binding antibodies or ligand, this MOF method is capable of selecting all kinds of nucleic acids with similar secondary structure features; therefore, it is suitable for the handling of a large variety and quantity of nucleic acids at the same time. This method also has the potential to gather information about the folding stability of biomolecules with secondary structures.

Quantification of Open-Metal Sites in Metal-Organic Frameworks Using Irreversible Water Adsorption

Metal-organic frameworks (MOFs) have been the focus of extensive research over the past couple of decades owing to their utility in enhancing performance in a range of applications including but not limited to gas separations, heterogeneous catalysis, and sensing. A rigorous understanding of the role of open-metal sites in molecular processes pertinent to these applications is first and foremost reliant on an accurate measure of the quantity of metal atoms that are coordinatively unsaturated under a given set of experimental conditions. Existing methods for quantifying open-metal sites exhibit drawbacks originating from unselective adsorption, use of high pressures and/or low temperatures, or the handling of potentially hazardous reagents. Here we investigate for the first time the use of room-temperature water adsorption isotherms for the quantification of MOF open-metal site density. We report that the quantity of water adsorbed irreversibly at room temperature on MIL-100 represents the open-metal site density under a given set of activation conditions. We use for this purpose a hydroxyl-containing version of MIL-100(Cr) that enables us to track (using in situ Fourier transform infrared spectroscopy) both dehydration and dehydroxylation events leading to open-metal site creation, providing evidence for site counts measured using irreversible water adsorption. Crucially, this approach circumvents the need for assumptions relating to the identity of open-metal sites and the degree of adsorbate saturation, while also obviating risks associated with the use of hazardous reagents. Given the near-universal presence of water as a labile ligand in the first coordination sphere of possible MOF open-metal sites, we envision that the protocols presented here could represent an approach to counting open-metal sites that is broadly applicable within (and maybe even beyond) the field of MOF research.

Trans Influence across a Metal-Metal Bond of a Paddle-Wheel Unit on Interaction with Gases in a Metal-Organic Framework

Metal-organic frameworks (MOFs) are known as promising adsorbent materials that can recognize gases specifically. In the frameworks, gases favor interacting with specific binding sites such as open metal sites (OMSs), which can consist of various metals and show characteristic adsorption properties. A recently reported framework possessing OMSs of rhodium paddle-wheel (Rh-PW) showed distinct adsorption properties between NO and CO. We investigated theoretically the reasons for stronger NO binding to the Rh-PW and different adsorption amounts between NO and CO using Rh-PW cluster models, as well as the frequently reported Cu-PW for comparison. We also analyzed the cases of CO₂ and N₂, which are often used to probe functions of MOFs. We observed an increase in binding energy of NO at the second adduction of NO. On the basis of energy decomposition analysis, we found that Rh-NO bond formation inducing a trans influence is important for the stronger binding than with CO. Furthermore, we proposed a reason for twice the adsorption amount of NO than CO. The results are consistent with experimental observations, giving us insight into design functions of MOFs by selecting metal species.

Polyol Process Coupled to Cold Plasma as a New and Efficient Nanohydride Processing Method: Nano-Ni2H as a Case Study

An alternative route for metal hydrogenation has been investigated: cold plasma hydrogen implantation on polyol-made transition metal nanoparticles. This treatment applied to a challenging system, Ni–H, induces a re-ordering of the metal lattice, and superstructure lines have been observed by both Bragg–Brentano and grazing incidence X-ray diffraction. The resulting intermetallic structure is similar to those obtained by very high-pressure hydrogenation of nickel and prompt us to suggest that plasma-based hydrogen implantation in nanometals is likely to generate unusual metal hydride, opening new opportunities in chemisorption hydrogen storage. Typically, almost isotropic in shape and about 30 nm sized hexagonal-packed Ni₂H single crystals were produced starting from similarly sized cubic face-centred Ni polycrystals.

A turn-on luminescent probe for Fe3+ and ascorbic acid with logic gate operation based on a zinc(ii)-based metal–organic framework

A zinc(ii)-based metal–organic framework exhibits fluorescence turn-on behaviour for Fe³⁺ and AA with high sensitivity and selectivity.

Preparation and characterization of metal–organic frameworks and their composite Eu2O3@[Zn2(bdc)2dabco] (ZBDh) via pulsed laser ablation in a flowing liquid

The nanocomposites Eu₂O₃@[Zn₂(bdc)₂dabco] (ZBDh) synthesized by PLA in a flowing liquid can be used for the detection of methanol in fluorescence sensing.

Carbon dioxide induced structural phase transition in metal–organic frameworks CPO-27

The framework of CO₂ saturated CPO-27 is deformed below 110 K into a superstructure of the original honeycomb structure.

Metal organic frameworks as solid catalysts for liquid-phase continuous flow reactions

This Feature Article describes the recent developments in the use of MOFs as catalysts under continuous flow conditions illustrating that these materials can meet the required stability.

From IR to x-rays: gaining molecular level insights on metal-organic frameworks through spectroscopy

This topical review focuses on the application of several types of spectroscopy methods to a class of solid state materials called metal organic frameworks (MOFs). MOFs are self-assembled, porous crystalline materials composed of metal cluster nodes linked through coordination bonds with organic or organometallic molecular constituents. Their unique host-guest properties make them attractive for many adsorption-based applications such as gas storage and separation, catalysis, sensing and others. While much research focuses on the development and application of these materials, fundamental studies of MOF properties and molecular level host-guest interactions behind their functionality have become a significant research direction on its own. Spectroscopy methods are now ubiquitous tools in this pursuit. This review focuses on the application of three classes of spectroscopy methods to MOF materials: vibrational, optical electronic and x-ray spectroscopies. Following brief introductions to each method that include pertinent theory and experimental considerations, we present a broad overview of the types of MOF systems that have been studied, with specific examples and important new molecular level insights highlighted along the way. The current status of spectroscopic studies of MOFs is presented at the end along with some perspectives on the future directions in this area of research.

Sequential and recyclable sensing of Fe3+ and ascorbic acid in water with a terbium(iii)-based metal-organic framework

A water-stable three-dimensional (3D) metal-organic framework (MOF) of {[Tb(Cmdcp)(H₂O)₃]₂(NO₃)₂·5H₂O}_n (1, H₃CmdcpBr = N-carboxymethyl-(3,5-dicarboxyl)pyridinium bromide) has been synthesized and characterized. MOF 1 is highly emissive, giving rise to green luminescence that can be quenched by Fe³⁺ due to the partial overlap of its excitation spectrum with the absorption spectrum of Fe³⁺. The subsequent introduction of ascorbic acid (AA) leads to the reduction of Fe³⁺ into Fe²⁺, accompanied by the near-entire recovery of MOF 1 emission. The density functional theory (DFT) calculation results support the proposed mechanism. Such a sensing cycle is further transferable to urine and serum samples with a satisfactory near-quantitative recovery, highlighting its good potential in biologically relevant applications.

Metal Organic Frameworks (MOFs) and ultrasound: A review

Metal-organic frameworks (MOFs) have received a lot of attention due to their unique properties and abundant functionalities. Permanent porosity and high surface area are just a few traits that have made them attractive to researchers. They can be prepared as task-specific materials by exploiting the functional group variety and tuning their size and geometry. The main purpose of this review is to present an alternative method of preparing MOF crystals and underline the advantages of ultrasound assisted (sonochemical) synthesis. State of the art ultrasound assisted techniques for the preparation of MOFs in nanoscale are presented. Optimization of morphology and particle size is highlighted throughout this work, as we discuss the effects of various factors, such as energy input, reagent concentration, adequate solvents, reaction time and more.

Structure, characterization, and catalytic properties of open-metal sites in metal organic frameworks

This review provides an overview of the current understanding of structure–catalytic properties of open-metal sites in metal organic framework materials.

Framework disorder and its effect on selective hysteretic sorption of a T-shaped azole-based metal-organic framework

Metal-organic frameworks with highly ordered porosity have been studied extensively. In this paper, the effect of framework (pore) disorder on the gas sorption of azole-based isoreticular Cu(II) MOFs with rtl topology and characteristic 1D tubular pore channels is investigated for the first time. In contrast to other isoreticular rtl metal-organic frameworks, the Cu(II) metal-organic framework based on 5-(1H-imidazol-1-yl)isophthalate acid has a crystallographically identifiable disordered framework without open N-donor sites. The framework provides a unique example for investigating the effect of pore disorder on gas sorption that can be systematically evaluated. It exhibits remarkable temperature-dependent hysteretic CO2 sorption up to room temperature, and shows selectivity of CO2 over H2, CH4 and N2 at ambient temperature. The unique property of the framework is its disordered structure featuring distorted 1D tubular channels and DMF-guest-remediated defects. The results imply that structural disorder (defects) may play an important role in the modification of the performance of the material.

Phase dependent structural perturbation of a robust multicomponent assembled icosahedral array

We report on the assembly of three-fold axially compressed icosahedral arrays of the bowl shaped p-sulfonatocalix[4]arene molecules in the solid-state, intricately bound to dipicolinate and yttrium(iii) ions, with the compression reflected in Hirshfeld surface analyses. Solution studies show dissolution of the icosahedra intact, but with a geometrical rearrangement to regular icosahedra.

Metal-Organic Frameworks for Separation

Separation is an important industrial step with critical roles in the chemical, petrochemical, pharmaceutical, and nuclear industries, as well as in many other fields. Although much progress has been made, the development of better separation technologies, especially through the discovery of high-performance separation materials, continues to attract increasing interest due to concerns over factors such as efficiency, health and environmental impacts, and the cost of existing methods. Metal-organic frameworks (MOFs), a rapidly expanding family of crystalline porous materials, have shown great promise to address various separation challenges due to their well-defined pore size and unprecedented tunability in both composition and pore geometry. In the past decade, extensive research is performed on applications of MOF materials, including separation and capture of many gases and vapors, and liquid-phase separation involving both liquid mixtures and solutions. MOFs also bring new opportunities in enantioselective separation and are amenable to morphological control such as fabrication of membranes for enhanced separation outcomes. Here, some of the latest progress in the applications of MOFs for several key separation issues, with emphasis on newly synthesized MOF materials and the impact of their compositional and structural features on separation properties, are reviewed and highlighted.

Porous Metal-Organic Polyhedral Framework containing Cuboctahedron Cages as SBUs with High Affinity for H2 and CO2 Sorption: A Heterogeneous Catalyst for Chemical Fixation of CO2

Development of active porous materials that can efficiently adsorb H₂ and CO₂ is needed, due to their practical utilities. Here we present the design and synthesis of an interpenetrated Cu^II metal-organic framework (MOF) that is thermally stable, highly porous and can act as a heterogeneous catalyst. The Cu^II -MOF contains a highly symmetric polyhedral metal cluster (Cu₂₄ ) with cuboctahedron geometry as secondary building unit (SBU). The double interpenetration of such huge cluster-containing nets provides a high density of open metal sites, due to which it exhibits remarkable H₂ storage capacity (313 cm³ g^-1 at 1 bar and 77 K) as well as high CO₂ capture ability (159 cm³ g^-1 at 1 bar and 273 K). Further, its propensity towards CO₂ sorption can be utilized for the heterogeneous catalysis of the chemical conversion of CO₂ into the corresponding cyclic carbonates upon reaction with epoxides, with high turnover number and turnover frequency values.