Alternating Cascade Metathesis Polymerization of Enynes and Cyclic Enol Ethers with Active Ruthenium Fischer Carbenes

Multi-Generational Frontal Curing and Chemical Recycling of Polydicyclopentadiene Thermosets

Polydicyclopentadiene (pDCPD) is a high-performance thermoset with lightweight and exceptional thermomechanical properties. However, its traditional thermal curing process is energy-intensive and lacks chemical recyclability. Frontal Ring-Opening Metathesis Polymerization (FROMP) is an energy-efficient curing process and allows additive manufacturing of pDCPD. 2,3-Dihydrofuran (DHF) has been shown as an effective comonomer to allow the deconstruction of pDCPD thermosets when incorporated at a small fraction in pDCPD. Herein, a simple strategy for chemical recycling of pDCPD thermosets is reported, and maintaining FROMP characteristics and thermomechanical properties of the thermosets over five life cycles. Norbornadiene (NBD) is a key additive in resins containing recycled pDCPD to enhance polymerization kinetics and sustain FROMP characteristics. A one-pot strategy is also developed to deconstruct pDCPD thermosets and simultaneously functionalize the chain ends with norbornenes for reincorporating deconstructed oligomers back to the next generation thermoset. Using these strategies, five generations of recycling pDCPD thermosets with invariable thermomechanical properties are demonstrated. This work highlights a scalable and energy-efficient process to produce chemically recyclable pDCPD thermosets, significantly improving the circularity of this class of high-performance thermosets.

Controlled polymerization of levoglucosenone-derived enynes to give bio-based polymers with tunable degradation rates and high glass transition temperatures

In recent years, pollution from plastic waste has intensified the demand for sustainable polymers. Hence, biomass-derived degradable polymers offer a promising solution. For example, levoglucosenone, a readily available biomass product from cellulose pyrolysis, is an attractive building block for polymer synthesis. However, the metathesis polymerization of levoglucosenone-derived monomers has been difficult to control due to poor monomer reactivity, requiring an unstable but reactive ruthenium catalyst (C793). To facilitate the polymerization, we introduced a cascade motif to successfully demonstrate controlled polymerization of levoglucosenone-derived enynes using a commercially available 3rd-generation Grubbs catalyst. This living polymerization also enabled block copolymer synthesis. Furthermore, the degradation rates of these polymers can be adjusted over 2 orders of magnitude through monomer structural modifications. Notably, we observed higher glass transition temperatures of 152-198 °C by varying structural parameters.

3,6-Anhydrogalactal as a Single-Addition Monomer for Chain-End Functionalization of Metathesis Polymers

Controlling the structure and reactivity of the chain-end group is a central objective in modern polymer chemistry. Here we introduce 3,6-anhydrogalactal as a single-addition monomer that enables efficient and versatile chain-end functionalization of metathesis polymers. Readily synthesized from biomass-derived galactal, 3,6-anhydrogalactal exhibits excellent single-addition reactivity, allowing precise chain-end modifications even when introduced simultaneously with the propagating monomer. Theoretical calculations provide mechanistic insights into the unique reactivities governing its single-addition behavior. Its broad functional group compatibility facilitates diverse applications, including block copolymer synthesis, polymer-polymer coupling, and bioconjugation, demonstrating significant potential for advancing polymer materials and bioconjugation strategies.

Degradable Alternating Copolymers from Living Radical Copolymerization of Natural Levoglucosenone and Dienes

Here, we present an efficient synthetic route to biobased alternating copolymers via the living radical copolymerization of naturally occurring levoglucosenone (LGO) and dienes. By employing reversible addition-fragmentation chain transfer (RAFT) polymerization, well-defined LGO-derived copolymers were readily synthesized featuring high degrees of alternation, well-controlled molecular weights, and excellent end-group fidelity. Additionally, the alternating copolymers exhibited thermal and mechanical properties comparable to those of the commodity polystyrene. Furthermore, an on-demand metathesis degradation was identified, highlighting their potential as degradable materials.

Ring-Opening Metathesis Polymerization of 1,2-Dihydroazete Derivatives

Fischer carbenes have recently found great utility in the construction of degradable metathesis materials, but investigations have been limited to oxygen-containing enol ether monomers. Here, the ring-opening metathesis polymerization of 1,2-dihydroazetes is reported. The polymerization proceeds regioselectively, and the resulting molecular weights are targetable by adjusting the Grubbs initiator loading. Under acidic conditions, the resulting polymers degrade into 3-aminopropanal derivatives through hydrolysis of the recurring enamide motifs in the polymer backbone. Additionally, the underlying kinetics and thermodynamics of the polymerization were studied through DFT calculations to elucidate the origins of metathesis regioselectivity. This work further expands the suite of monomers available to generate degradable metathesis materials and provides a flexible platform for target applications.

Elucidating the backbone degradation mechanism of poly(7-oxa-2,3-diazanorbornene)

Our recent study introduced a novel class of polymers, poly(7-oxa-2,3-diazanorbornene), characterized by synthetic accessibility and the capacity for living polymerization and degradation even under pH = 7.4 buffered conditions. In this work, our research delves into the polymer's degradation behavior, revealing a detailed mechanism of degradation under both acidic and neutral pH environments.

Regioselective Palladium-Catalyzed Chain-Growth Allylic Amination Polymerization of Vinyl Aziridines

Organometallic-mediated chain growth polymerization of readily accessible chemical building blocks is responsible for important commercial and technological advances in polymer science, but the incorporation of heteroatoms into the polymer backbone through these mechanisms remains a challenge. Transition metal π-allyl complexes are well-developed organometallic intermediates for carbon-heteroatom bond formation in small-molecule catalysis yet remain underexplored in polymer science. Here, we developed a regioselective palladium-phosphoramidite-catalyzed chain-growth allylic amination polymerization of vinyl aziridines for the synthesis of novel nitrogen-rich polymers via ambiphilic π-allyl complexes. The polymerization accessed a linear microstructure with four carbons between each nitrogen, which is challenging to achieve through other chain-growth polymerization approaches. The highly regioselective allylic amination polymerization demonstrated the characteristics of a controlled polymerization and was able to achieve molar masses exceeding 20 kg mol-1 with low dispersities (D̵ < 1.3). The identification of the polymer structure and well-defined chain ends were supported by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, and chain extension experiments demonstrate opportunities for building more complex materials from this method. A Hammett study was performed to understand the role of the catalyst and monomer structure on regioselectivity, and the data supported a mechanism wherein regioselectivity was primarily controlled by the ligand-metal complex. Postpolymerization desulfonylation provided access to a novel polyamine that demonstrated broad anticancer activity in vitro, which highlights the benefits of unlocking novel polyamine microstructures through regioselective chain-growth allylic amination polymerization.

Designing Degradable Polymers from Tricycloalkenes via Complete Cascade Metathesis Polymerization

Cascade metathesis polymerization has been developed as a promising method to synthesize complex but well-defined polymers from monomers containing multiple reactive functional groups. However, this approach has been limited to the monomers involving simple alkene/alkyne moieties or produced mainly non-degradable polymers. In this study, we demonstrate a complete cascade ring-opening/ring-closing metathesis polymerization (RORCMP) using various tricycloalkenes and two strategies for the efficient degradation. Through rational design of tricycloalkene monomers, the structure and reactivity relationship was explored. For example, tricycloalkenes with trans configuration in the central ring enabled faster and better selective cascade RORCMP than the corresponding cis isomers. Also, a 4-substituted cyclopentene moiety in the monomers significantly enhanced the overall cascade RORCMP performance, with the maximum turnover number (TON) reaching almost 10,000 and molecular weight up to 170 kg/mol using an amide-containing monomer. Furthermore, we achieved one-shot cascade multiple olefin metathesis polymerization using tricycloalkenes and a diacrylate, to produce new highly A,B-alternating copolymers with full degradability. Lastly, we successfully designed xylose-based tricycloalkenes to give well-defined polymers that underwent ultra-fast and complete degradation under mild conditions.

Ring Opening Metathesis Polymerization of Cyclooctadiene and Cyclooctene with Dihydrofuran: Influence of Ru Fischer Carbene

Vinyl ethers are commonly used to deactivate Grubbs catalysts and terminate ring opening metathesis polymerization (ROMP) by forming Fischer carbene species with attenuated metathesis reactivity. However, we recently demonstrated that a cyclic enol ether, 2,3-dihydrofuran (DHF), can in fact be homopolymerized or copolymerized with norbornene derivatives. 1,5-Cyclooctadiene (COD) and cyclooctene (COE) consist of an important class of ROMP monomers, and we describe here a study of their copolymerization with DHF. Addition of DHF greatly suppressed the ROMP activity of COD and COE and resulted in significant alkene isomerization of COD. Chloranil was found to be an effective additive to prevent undesired isomerization and promote copolymerization. As a result, high molecular weight COD/COE and DHF copolymers were synthesized. Hydrolysis of the enol ether main chain linkages yields polyalkenamers with alcohol and aldehyde end groups. This study encourages further exploration of the in situ formed Ru Fischer carbene species in ROMP to access degradable polymers.

Mechanically Triggered Polymer Deconstruction through Mechanoacid Generation and Catalytic Enol Ether Hydrolysis

Polymers that amplify a transient external stimulus into changes in their morphology, physical state, or properties continue to be desirable targets for a range of applications. Here, we report a polymer comprising an acid-sensitive, hydrolytically unstable enol ether backbone onto which is embedded gem-dichlorocyclopropane (gDCC) mechanophores through a single postsynthetic modification. The gDCC mechanophore releases HCl in response to large forces of tension along the polymer backbone, and the acid subsequently catalyzes polymer deconstruction at the enol ether sites. Pulsed sonication of a 61 kDa PDHF with 77% gDCC on the backbone in THF with 100 mM H2O for 10 min triggers the subsequent degradation of the polymer to a final molecular weight of less than 3 kDa after 24 h of standing, whereas controls lacking either the gDCC or the enol ether reach final molecular weights of 38 and 27 kDa, respectively. The process of sonication, along with the presence of water and the existence of gDCC on the backbone, significantly accelerates the rate of polymer chain deconstruction. Both acid generation and the resulting triggered polymer deconstruction are translated to bulk, cross-linked polymer networks. Networks formed via thiol-ene cross-linking and subjected to unconstrained quasi-static uniaxial compression dissolve on time scales that are at least 3 times faster than controls where the mechanophore is not covalently coupled to the network. We anticipate that this concept can be extended to other acid-sensitive polymer networks for the stress-responsive deconstruction of gels and solvent-free elastomers.

Biomass-Derived Degradable Polymers via Alternating Ring-Opening Metathesis Polymerization of Exo-Oxanorbornenes and Cyclic Enol Ethers

Degradable polymers made via ring-opening metathesis polymerization (ROMP) hold tremendous promise as eco-friendly materials. However, most of the ROMP monomers are derived from petroleum resources, which are typically considered less sustainable compared to biomass. Herein, we present a synthetic strategy to degradable polymers by harnessing alternating ROMP of biomass-based cyclic olefin monomers including exo-oxanorbornenes and cyclic enol ethers. A library of well-defined poly(enol ether)s with modular structures, tunable glass transition temperatures, and controlled molecular weights was achieved, demonstrating the versatility of this approach. Most importantly, the resulting copolymers exhibit high degrees of alternation, rendering their backbones fully degradable under acidic conditions.

A General Strategy To Access Alternating Styrene/Substituted Styrene Copolymers by Using a Traceless Controlling Group

We herein report a synthetic strategy for alternating copolymers of styrene and substituted styrenes by utilizing α-styryl boronate pinacol ester (StBpin) as the co-monomer through radical alternating copolymerization followed by protodeboronation. The excellent alternating polymerization behavior of the StBpin co-monomer in such a radical polymerization system is considered to be attributed to the steric hindrance and radical stabilization exerted by the Bpin group. This strategy is effective with a wide range of substituted styrene co-monomers regardless of the electronic nature of the substituents, and the protodeboronation of the alternating Bpin-containing polymers is highly efficient without polymer backbone alternation. RAFT living polymerization was also compatible with this approach. Thus, this strategy provides a way to build-up alternating copolymers consisting of similar styrene-type co-monomers, which has been inaccessible by conventional synthetic methods.

Living Alternating Ring-Opening Metathesis Copolymerization of 2,3-Dihydrofuran to Provide Completely Degradable Polymers

2,3-Dihydrofuran (DHF) has recently been gaining significant attention as a comonomer in metathesis polymerization, thanks to its ability to provide the resultant polymer backbones with stimuli-responsive degradability. In this report, we present living alternating copolymerization of DHF with less reactive endo-tricyclo[4.2.2.02,5 ]deca-3,9-dienes (TDs) and endo-oxonorbornenes (oxoNBs). By carefully controlling the reactivity of both the Ru initiators and the monomers, we have achieved outstanding A, B-alternation (up to 98 %) under near stoichiometric DHF loading conditions. Notably, we have also found that the use of a more sterically hindered Ru initiator helps to attain polymer backbones with higher DHF incorporation and superior A, B-alternation. While preserving the living characteristics of DHF copolymerization, as evidenced by controlled molecular weights (up to 73.9 kDa), narrow dispersities (down to 1.05), and block copolymer formation, our DHF copolymers could be broken down to a single repeat unit level under acidic conditions. 1 H NMR analysis of the model copolymer revealed that after 24 hours of degradation, up to 80 % of the initial polymer was transformed into a single small molecule product, and after purification, up to 66 % of the degradation product was retrieved. This study provides a versatile approach to improve the alternation and degradability of DHF copolymers.

Controlled Ring Opening Metathesis Polymerization of a New Monomer: On Switching the Solvent-Water-Soluble Homopolymers to Degradable Copolymers

A new heterocyclic monomer is developed via simple Diels-Alder reaction which is reluctant to polymerize in dichloromethane (DCM) whereas undergoes facile polymerization in tetrahydrofuran with excellent control over molecular weight (Mn ) and dispersities (Đ) using Grubbs' third generation catalyst (G3). The deprotection of the tert-butoxycarbonyl group from the polymeric backbone yielded a water-soluble ring opening metathesis polymerization (ROMP) polymer easily. Moreover, in DCM this new monomer copolymerizes with 2,3-dihydrofuran under catalytic living ROMP conditions to give backbone degradable polymers. All the synthesized polymers are characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. It is believed that this new route to water soluble ROMP homopolymers as well as the cost-effective and environmentally friendly route to degradable copolymers and block-copolymers could find applications in biomedicine in the near future.

Long-Range Kinetic Effects on the Alternating Ring Opening Metathesis of Bicyclo[4.2.0]oct-6-ene-7-carboxamides and Cyclohexene

We report an investigation of rates of ruthenium-catalyzed alternating ring opening metathesis (AROM) of cyclohexene with two different Ru-cyclohexylidene carbenes derived from bicyclo[4.2.0]oct-6-ene-7-carboxamides (A monomer) that bear different side chains. These monomers are propylbicyclo[4.2.0]oct-6-ene-7-carboxamide and N-(2-(2-ethoxyethoxy)ethanylbicyclo[4.2.0]oct-6-ene-7-carboxamide. The amide substitution of these monomers directly affects both the rate of the bicyclo[4.2.0]oct-6-ene-7-carboxamide ring opening and the rate of reaction of the resulting carbene with cyclohexene (B monomer). The resulting Ru-cyclohexylidenes underwent reversible ring opening metathesis with cyclohexene. However, the thermodynamic equilibrium disfavored cyclohexene ring opening. Utilization of triphenylphosphine forms a more stable PPh3 ligated complex, which suppresses the reverse ring closing reaction and allowed direct measurements of the forward rate constants for formation of various A-B and A-B-A' complexes through carbene-catalyzed ring-opening metathesis and thus gradient polymer structure-determining steps. The relative rate of the propylbicyclo[4.2.0]oct-6-ene-7-carboxamide ring opening is 3-fold faster than that of the N-(2-(2-ethoxyethoxy)ethanylbicyclo[4.2.0]oct-6-ene-7-carboxamide. In addition, the rate of cyclohexene ring-opening catalyzed by the propyl bicyclooctene is 1.4 times faster than when catalyzed by the ethoxyethoxy bicyclooctene. Also, the subsequent rates of bicyclo[4.2.0]oct-6-ene-7-carboxamide ring opening by propyl-based Ru-hexylidene are 1.6-fold faster than ethoxyethoxy-based Ru-hexylidene. Incorporation of the rate constants into reactivity ratios of bicyclo[4.2.0]amide-cyclohexene provides prediction of copolymerization kinetics and gradient copolymer structures.

The Fluorocarbene Exploit: Enforcing Alternation in Ring-Opening Metathesis Polymerization

Fluoroalkenes are known to be notoriously reluctant substrates for olefin metathesis due to the generation of thermodynamically stable Fischer-type fluorocarbene intermediates, which invariably fail to undergo further reaction. In the present disclosure, we find that fluorine substitution on the sp² carbon also strictly suppresses homopolymerization of norbornene derivatives (NBEs), and this can be harnessed to achieve alternating ring-opening metathesis polymerization (ROMP) with an appropriately electron-rich comonomer. Dihydrofuran (DHF) is thereby shown to undergo alternating ROMP with fluorinated norbornenes, the perfectly alternating structure of the resulting copolymer having been unambiguously elucidated by ¹H, ¹⁹F, and ¹³C NMR analyses. Furthermore, we find that the degradability of the resultant copolymers in acidic media via hydrolysis of enol ether moieties in the backbone can be predictably modulated by the number of fluorine atoms present in the NBE comonomer, affording an opportunity to engage with the desirable physical properties of fluorinated polymers while limiting their attendant environmental degradability issues.

Catalytic Living Ring-Opening Metathesis Polymerization Using Vinyl Ethers as Effective Chain-Transfer Agents

A catalytic living ring-opening metathesis copolymerization (ROMP) method is described that relies on a degenerative, reversible and regioselective exchange of propagating Fischer-carbenes. All characteristics of a living polymerization such as narrow dispersity, excellent molar mass control and the ability to form block copolymers are achieved by this method. The method allows the use of up to 200 times less ruthenium complex than traditional living ROMP. We demonstrate the synthesis of ROMP-ROMP diblock copolymers, ATRP from a ROMP macro-initiator and living ROMP from a PEG-based macro chain transfer agent. The cost-effective, sustainable and environmentally friendly synthesis of degradable polymers and block copolymers enabled by this strategy will find various applications in biomedicine, materials science, and technology.

Water-Accelerated Decomposition of Olefin Metathesis Catalysts

Water is ubiquitous in olefin metathesis, at levels ranging from contaminant to cosolvent. It is also non-benign. Water-promoted catalyst decomposition competes with metathesis, even for "robust" ruthenium catalysts. Metathesis is hence typically noncatalytic for demanding reactions in water-rich environments (e.g., chemical biology), a challenge as the Ru decomposition products promote unwanted reactions such as DNA degradation. To date, only the first step of the decomposition cascade is understood: catalyst aquation. Here we demonstrate that the aqua species dramatically accelerate both β-elimination of the metallacyclobutane intermediate and bimolecular decomposition of four-coordinate [RuCl(H₂O)_n(L)(=CHR)]Cl. Decomposition can be inhibited by blocking aquation and β-elimination.

Controlled Living Cascade Polymerization of Polycyclic Enyne Monomers: Leveraging Complete Degradability for a Stereochemical and Structural Investigation

Cascade polymerizations recently gained significant attention due to their use of unique transformations, involving multiple bond making and/or breaking steps, when converting monomers to repeat units. However, designing complex cascade polymerizations which proceed in a controlled manner is very challenging. Various side reactions can hamper polymerization performance and the efficiency of the cascade. In this work, we explore a metathesis-based cascade polymerization of unique polycyclic enyne monomers, which contain a terminal alkyne and two cyclic alkenes. By modifying the monomer's stereochemistry, linkers, and ring types, we were able to modulate the polymerization performance and the extent to which a complete cascade reaction occurs. Upon subjecting the resulting polymers to mild acidic conditions and analyzing the degradation products, we were able to calculate the percentage of repeat units derived from a complete cascade reaction (termed the cascade efficiency). In addition to identifying how various structural parameters in the monomer influence the success of a cascade polymerization, we were able to achieve controlled living cascade polymerizations of multiple monomers with >99% cascade efficiency and produce various block copolymers.

Controlled Alternating Metathesis Copolymerization of Terminal Alkynes

Terminal alkynes display high reactivity toward Ru-carbene metathesis catalysts. However, the formation of a less reactive bulky carbene hinders their homopolymerization. Simultaneously, the higher reactivity of alkynes does not allow efficient cross propagation with sterically less-hindered cycloalkene monomers, resulting in inefficient copolymerization. Nonetheless, terminal alkynes undergo rapid cross-metathesis with vinyl ethers. Therefore, an efficient cross propagation can be achieved with terminal alkynes and cyclic enol ether monomers. Here, we show that terminal alkyne derivatives can be copolymerized in an alternating fashion with 2,3-dihydrofuran using Grubbs' third generation catalyst (G3). A linear relationship of the number-average molecular weight versus monomer to initiator ratio and block copolymer synthesis confirmed a controlled copolymerization. The SEC and NMR analyses of the synthesized copolymers confirmed the excellent control over molecular weight and exclusive alternating nature of the copolymer. The regioselective chain transfer of G3 to vinyl ether and the high reactivity of the Fischer-type Ru carbene toward terminal alkynes was also exploited for polymer conjugation. Finally, the presence of an acid labile backbone functionality in the synthesized alternating copolymers allowed complete degradation of the copolymer within a short time interval which was confirmed by SEC analyses.

Cascade Alternating Metathesis Cyclopolymerization of Diynes and Dihydrofuran

Ruthenium alkoxymethylidene complexes have recently come into view as competent species for metathesis copolymerization reactions when coupled with appropriate comonomer targets. Here, we explore the ability of Fischer-type carbenes to participate in cascade alternating metathesis cyclopolymerization (CAMC) through facile terminal alkyne addition. The combination of diyne monomers and an equal feed ratio of low-strain dihydrofuran leads to a controlled chain-growth copolymerization with high degrees of alternation (>97% alternating diads) and produces degradable polymer materials with low dispersities and targetable molecular weights. When combined with enyne monomers, this method is amenable to the synthesis of alternating diblock copolymers that can be fully degraded to short oligomer fragments under aqueous acidic conditions. This work furthers the potential for the generation of functional metathesis materials via Fischer-type ruthenium alkylidenes.

Closing the "One Monomer-Two Polymers-One Monomer" Loop via Orthogonal (De)polymerization of a Lactone/Olefin Hybrid

Two well-known low-ceiling-temperature (LCT) monomers, γ-butyrolactone (γ-BL) toward ring-opening polymerization (ROP) to polyester and cyclohexene toward ring-opening metathesis polymerization (ROMP) to poly(cyclic olefin), are notoriously "nonpolymerizable". Here we present a strategy to render not only polymerizability of both the γ-BL and cyclohexene sites, orthogonally, but also complete and orthogonal depolymerization, through creating an LCT/LCT hybrid, bicyclic lactone/olefin (BiL⁼). This hybrid monomer undergoes orthogonal polymerization between ROP and ROMP, depending on the catalyst employed, affording two totally different classes of polymeric materials from this single monomer: polyester P(BiL⁼)_ROP via ROP and functionalized poly(cyclic olefin) P(BiL⁼)_ROMP via ROMP. Intriguingly, both P(BiL⁼)_ROP and P(BiL⁼)_ROMP are thermally robust but chemically recyclable under mild conditions (25-40 °C), in the presence of a catalyst, to recover cleanly the same monomer via chain unzipping and scission, respectively. In the ROP, topological and stereochemical controls have been achieved and the structures characterized. Furthermore, the intact functional group during the orthogonal polymerization (i.e., the double bond in ROP and the lactone in ROMP) is utilized for postfunctionalization for tuning materials' thermal and mechanical performances. The impressive depolymerization orthogonality further endows selective depolymerization of both the ROP/ROMP copolymer and the physical blend composites into the same starting monomer.

Ruthenium-Catalyzed Diazoacetates/Cyclooctene Metathesis Copolymerization

As a powerful synthetic tool, ruthenium-catalyzed ring-opening metathesis polymerization (ROMP) has been widely utilized to prepare diverse polymers. In this contribution, we demonstrated the polymerization of cyclooctene in the presence...

The formation of photodegradable nitrophenylene polymers via ring-opening metathesis polymerization

A photodegradable nitrophenylene polymer was prepared via ring-opening metathesis polymerization (ROMP). The resulting polymer was degraded in the presence of UVA light without any chemical additives within 1 hour.

A Fischer-Type Ruthenium Carbene Complex as a Metathesis Catalyst for the Synthesis of Enol Ethers

The Grubbs G-I or G-II catalyst gives the ruthenium ethoxy carbene complex, which catalyzes ring-opening cross metathesis (ROCM) of a strained cyclic alkene to give a diene where one of the two alkene moieties in the product contains an ethoxy substituent. No polymeric products are detected. Hydrocarbons such as parent norbornene or substituted cyclopropenes can proceed with the reaction smoothly. Tertiary amines, N-alkylimides, esters, and aryl or alkyl bromides remain intact under the reaction conditions. In addition to vinyl ethers, vinylic esters can also be used. The time required to reach a 50% yield of the ROCM product t₅₀ varies from 0.01 to 140 h depending on the strain and nucleophilicity of the double bond. Anchimeric participation of an electron-rich group would result in significant enhancement of the reactivity, and the t₅₀ could be as short as several minutes. A similar substrate without such a neighboring group shows a much slower rate. An exo-norborne derivative reacts much faster than the corresponding endo-isomer. Alkenes with poor nucleophilicity are less favored for the ROCM process, so is less strained cyclooctene.

A versatile approach for the synthesis of degradable polymers via controlled ring-opening metathesis copolymerization

Norbornene derivatives (NBEs) are common monomers for living ring-opening metathesis polymerization and yield polymers with low dispersities and diverse functionalities. However, the all-carbon backbone of poly-NBEs is non-degradable. Here we report a method to synthesize degradable polymers by copolymerizing 2,3-dihydrofuran with NBEs. 2,3-Dihydrofuran rapidly reacts with Grubbs catalyst to form a thermodynamically stable Ru Fischer carbene-the only detectable active Ru species during copolymerization-and the addition of NBEs becomes rate determining. This reactivity attenuates the NBE homoaddition and allows uniform incorporation of acid-degradable enol ether linkages throughout the copolymers, which enables complete polymer degradation while maintaining the favourable characteristics of living ring-opening metathesis polymerization. Copolymerization of 2,3-dihydrofuran with NBEs gives low dispersity polymers with tunable solubility, glass transition temperature and mechanical properties. These polymers can be fully degraded into small molecule or oligomeric species under mildly acidic conditions. This method can be readily adapted to traditional ring-opening metathesis polymerization of widely used NBEs to synthesize easily degradable polymers with tunable properties for various applications and for environmental sustainability.

Metathesis Cascade-Triggered Depolymerization of Enyne Self-Immolative Polymers*

A novel class of enyne self-immolative polymers (SIPs) capable of metathesis cascade-triggered depolymerization is reported. Studies on model compounds established 1,6-enyne structures for efficient metathesis cascade reactions. SIPs incorporating the optimized 1,6-enyne motif were prepared via both polycondensation and iterative exponential growth approaches. These SIPs demonstrated excellent stability in strong acid, base, nucleophiles, or at elevated temperatures, and can undergo efficient and complete depolymerization once triggered by a metathesis catalyst. Further studies revealed that introducing a terminal alkene to the chain end of the enyne SIPs improved the depolymerization efficiency, and established their potential as stimuli-responsive materials.

Ring-Opening Metathesis Polymerization of a Macrobicyclic Olefin Bearing a Sacrificial Silyloxide Bridge

Ring-opening metathesis polymerization (ROMP) has been regarded as a powerful tool for sequence-controlled polymerization. However, the traditional entropy-driven ROMP of macrocyclic olefins suffers from the lack of ring strain and poor regioselectivity, whereas the relay-ring-closing metathesis polymerization inevitably brings some unnecessary auxiliary structure into each monomeric unit. We developed a macrobicyclic olefin system bearing a sacrificial silyloxide bridge on the α,β'-positions of the double bond as a new class of sequence-defined monomer for regioselective ROMP. The monomeric sequence information is implanted in the macro-ring, while the small ring, a 3-substituted cyclooctene structure with substantial ring tension, can provide not only narrow polydispersity, but also high regio-/stereospecificity. Besides, the silyloxide bridge can be sacrificially cleaved by desilylation and deoxygenation reactions to provide clean-structured, non-auxiliaried polymers.

1,6-heptadiynes based cyclopolymerization functionalized with mannose by post polymer modification for protein interaction

Carbohydrate functionalized polymers or Glycopolymers have earned a great deal of interest in recent times for their potential biomedical applications. In the present study, a mannose containing glycopolymer was synthesized by cyclopolymerization of malonic acid derivative using second generation Hoveyda Grubbs' catalyst. Post-polymerization modification was done to install a propargyl moiety. Finally, functionalization of the propargylated polymer with 2-azidoethyl mannoside using azide-alkyne "click chemistry" furnished the target glycopolymer which was successfully characterized using NMR, FT-IR, mass spectroscopy and advanced polymer chromatography. The glycopolymer was found to self-assemble into capsule and spherical shape in water and DMSO respectively and these morphologies were observed through SEM and TEM. Upon interaction with Con A, the mannose containing glycopolymer showed an increment in aggregation induced fluorescence with increasing concentration of the lectin. In vitro cytotoxicity studies on MCF 7 cell line showed 90% cell viability up to glycopolymer concentration of 500 μg/mL.

Degradable polymers via olefin metathesis polymerization

The development of degradable polymers has commanded significant attention over the past half century. Approaches have predominantly relied on ring-opening polymerization of cyclic esters (e.g., lactones, lactides) and N-carboxyanhydrides, as well as radical ring-opening polymerizations of cyclic ketene acetals. In recent years, there has been a significant effort applied to expand the family of degradable polymers accessible via olefin metathesis polymerization. Given the excellent functional group tolerance of olefin metathesis polymerization reactions generally, a broad range of conceivable degradable moieties can be incorporated into appropriate monomers and thus into polymer backbones. This approach has proven particularly versatile in synthesizing a broad spectrum of degradable polymers including poly(ester), poly(amino acid), poly(acetal), poly(carbonate), poly(phosphoester), poly(phosphoramidate), poly(enol ether), poly(azobenzene), poly(disulfide), poly(sulfonate ester), poly(silyl ether), and poly(oxazinone) among others. In this review, we will highlight the main olefin metathesis polymerization strategies that have been used to access degradable polymers, including (i) acyclic diene metathesis polymerization, (ii) entropy-driven and (iii) enthalpy-driven ring-opening metathesis polymerization, as well as (iv) cascade enyne metathesis polymerization. In addition, the livingness or control of polymerization reactions via different strategies are highlighted and compared. Potential applications, challenges and future perspectives of this new library of degradable polyolefins are discussed. It is clear from recent and accelerating developments in this field that olefin metathesis polymerization represents a powerful synthetic tool towards degradable polymers with novel structures and properties inaccessible by other polymerization approaches.

Substituent Effects Provide Access to Tetrasubstituted Ring-Opening Olefin Metathesis of Bicyclo[4.2.0]oct-6-enes

Herein, we report the origin of unexpected reactivity of bicyclo[4.2.0]oct-6-ene substrates containing an α,β-unsaturated amide moiety in ruthenium-catalyzed alternating ring-opening metathesis polymerization reactions. Specifically, compared with control substrates bearing an ester, alkyl ketone, nitrile, or tertiary amide substituent, α,β-unsaturated substrates with a weakly acidic proton showed increased rates of ring-opening metathesis mediated by Grubbs-type ruthenium catalysts. ¹H NMR and IR spectral analyses indicated that deprotonation of the α,β-unsaturated amide substrates resulted in stronger coordination of the carbonyl group to the ruthenium metal center. Principal component analysis identified ring strain and the electron density on the carbonyl oxygen (based on structures optimized by means of ωB97X-D/6311+G(2df,2p) calculations) as the two key contributors to fast ring-opening metathesis of the bicyclo[4.2.0]oct-6-enes; whereas the dipole moment, conjugation, and energy of the highest occupied molecular orbital had little to no effect on the reaction rate. We conclude that alternating ring-opening metathesis polymerization reactions of bicyclo[4.2.0]oct-6-enes with unstrained cycloalkenes require an ionizable proton for efficient generation of alternating polymers.

Mechanochemical generation of acid-degradable poly(enol ether)s

In an effort to develop polymers that can undergo extensive backbone degradation in response to mechanical stress, we report a polymer system that is hydrolytically stable but unmasks easily hydrolysable enol ether backbone linkages when force is applied. These polymers were synthesized by ring-opening metathesis polymerization (ROMP) of a novel mechanophore monomer consisting of cyclic ether fused bicyclohexene. Hydrogenation of the resulting polymers led to significantly enhanced thermal stability (T_d > 400 °C) and excellent resistance toward acidic or basic conditions. Solution ultrasonication of the polymers resulted in up to 65% activation of the mechanophore units and conversion to backbone enol ether linkages, which then allowed facile degradation of the polymers to generate small molecule or oligomeric species under mildly acidic conditions. We also achieved solid-state mechano-activation and polymer degradation via grinding the solid polymer. Force-induced hydrolytic polymer degradability can enable materials that are stable under force-free conditions but readily degrade under stress. Facile degradation of mechanically activated polymechanophores also facilitates the analysis of mechanochemical products.

A mechanically responsive polymer system that is hydrolytically stable without stress, but unmasks enol ether backbone linkages under force to allow facile hydrolytic degradation.

The Impact of Water on Ru-Catalyzed Olefin Metathesis: Potent Deactivating Effects Even at Low Water Concentrations

Ruthenium catalysts for olefin metathesis are widely viewed as water-tolerant. Evidence is presented, however, that even low concentrations of water cause catalyst decomposition, severely degrading yields. Of 11 catalysts studied, fast-initiating examples (e.g., the Grela catalyst RuCl2(H2IMes)(=CHC6H4-2-O i Pr-5-NO2) were most affected. Maximum water tolerance was exhibited by slowly initiating iodide and cyclic (alkyl)(amino)carbene (CAAC) derivatives. Computational investigations indicated that hydrogen bonding of water to substrate can also play a role, by retarding cyclization relative to decomposition. These results have important implications for olefin metathesis in organic media, where water is a ubiquitous contaminant, and for aqueous metathesis, which currently requires superstoichiometric "catalyst" for demanding reactions.

Sugar-Based Polymers from d-Xylose: Living Cascade Polymerization, Tunable Degradation, and Small Molecule Release

Enyne monomers derived from D-xylose underwent living cascade polymerizations to prepare new polymers with a ring-opened sugar and degradable linkage incorporated into every repeat unit of the backbone. Polymerizations were well-controlled and had living character, which enabled the preparation of high molecular weight polymers with narrow molecular weight dispersity values and a block copolymer. By tuning the type of acid-sensitive linkage (hemi-aminal ether, acetal, or ether functional groups), we could change the degradation profile of the polymer and the identity of the resulting degradation products. For instance, the large difference in degradation rates between hemi-aminal ether and ether-based polymers enabled the sequential degradation of a block copolymer. Furthermore, we exploited the generation of furan-based degradation products, from an acetal-based polymer, to achieve the release of covalently bound reporter molecules upon degradation.