Forming Anisotropic Crystal Composites: Assessing the Mechanical Translation of Gel Network Anisotropy to Calcite Crystal Form

Bioinspired mechanical mineralization of organogels

Mineralization is a long-lasting method commonly used by biological materials to selectively strengthen in response to site specific mechanical stress. Achieving a similar form of toughening in synthetic polymer composites remains challenging. In previous work, we developed methods to promote chemical reactions via the piezoelectrochemical effect with mechanical responses of inorganic, ZnO nanoparticles. Herein, we report a distinct example of a mechanically-mediated reaction in which the spherical ZnO nanoparticles react themselves leading to the formation of microrods composed of a Zn/S mineral inside an organogel. The microrods can be used to selectively create mineral deposits within the material resulting in the strengthening of the overall resulting composite.

Affine Deformation and Self-Assembly Alignment in Hydrogel Nanocomposites

Tailoring the order in hierarchical structures is a key goal of bioinspired nanocomposite design. Recently, nacre-like materials have been developed by solvent evaporation methods that are scalable and attain advanced functionalities. However, understanding the alignment mechanisms of 2D fillers, nanosheets, or platelets remains challenging. This work explores possible pathways for nanocomposite ordering via orientation distribution functions. We demonstrate how the immobilization of 2D materials via (pseudo)network formation is crucial to alignment based on evaporation. We show a modified affine deformation model that describes such evaporative methods. In this, a gel network develops enough yield stress and uniformly deforms as drying proceeds, along with the immobilized particles, causing an in-plane orientation. Herein, we tested the dominance of this approach by using a thermo-reversible gel for rapid montmorillonite (MMT) particle fixation. We researched gelatin/MMT as a model system to investigate the effects of high loadings, orientational order, and aspect ratio. The nacre-like nanocomposites showed a semiconstant order parameter (⟨P2⟩ ∼ 0.7) over increasing nanofiller content up to 64 vol % filler. This remarkable alignment resulted in continuously improved mechanical and water vapor barrier properties over unusually large filler fractions. Some variations in stiffness and diffusion properties were observed, possibly correlated to the applied drying conditions of the hybrid hydrogels. The affine deformation strategy holds promise for developing next-generation advanced materials with tailored properties even at (very) high filler loadings. Furthermore, a gelling approach offers the advantages of simplicity and versatility in the formulation of the components, which is useful for large-scale fabrication methods.

Light-driven nucleation, growth, and patterning of biorelevant crystals using resonant near-infrared laser heating

Spatiotemporal control over crystal nucleation and growth is of fundamental interest for understanding how organisms assemble high-performance biominerals, and holds relevance for manufacturing of functional materials. Many methods have been developed towards static or global control, however gaining simultaneously dynamic and local control over crystallization remains challenging. Here, we show spatiotemporal control over crystallization of retrograde (inverse) soluble compounds induced by locally heating water using near-infrared (NIR) laser light. We modulate the NIR light intensity to start, steer, and stop crystallization of calcium carbonate and laser-write with micrometer precision. Tailoring the crystallization conditions overcomes the inherently stochastic crystallization behavior and enables positioning single crystals of vaterite, calcite, and aragonite. We demonstrate straightforward extension of these principles toward other biorelevant compounds by patterning barium-, strontium-, and calcium carbonate, as well as strontium sulfate and calcium phosphate. Since many important compounds exhibit retrograde solubility behavior, NIR-induced heating may enable light-controlled crystallization with precise spatiotemporal control.

Multi-Functionalization of Single crystals Mediated by Gel-Incorporation: A Bioinspired Strategy

Biominerals are inherently organic-inorganic crystal composites. Drawing inspiration from this biomineral structure, functionalized single crystals can be synthesized using the gel-grown method, resulting in the incorporation of gel-networks into the host crystals. By incorporating gel-networks, diverse guest materials, such as nanoparticles and dye molecules, can be uniformly and isotropically distributed within the crystals, thereby imparting non-intrinsic optical or magnetic properties to the host crystals. Additionally, gel-incorporation enhances the toughness and stability of the crystals as the incorporated gel-fibers and accompanying guest materials act as bridges to prevent crack propagation. Furthermore, gel-incorporation enables protein crystals to exhibit self-healing properties, which can be attributed to the dynamic bonding interaction between gel-networks and crystals. Notably, recent research has demonstrated that the incorporation of zwitterionic gel-networks enhances the charge effects on crystal morphology evolution as the charged groups become bound to the developing crystal surfaces, and their detachment is impeded by the interconnected gel-networks. Therefore, preparing single crystals with gel-incorporation is a remarkable strategy for synthesizing functionalized crystal materials.

Tailored hydrogel composite membrane for the regulated crystallization of monosodium urate monohydrate within coffee's metabolites system

Herein, a facile bionic research platform with fabricated hydrogel composite membrane (HCM) is constructed to uncover the effects of the main components of coffee's metabolites on MSUM crystallization. Tailored and biosafety polyethylene glycol diacrylate/N-isopropyl acrylamide (PEGDA/NIPAM) HCM allows the proper mass transfer of coffee's metabolites and can well simulate the process of coffee's metabolites acting in the joint system. With the validations of this platform, it is shown that chlorogenic acid (CGA) can hinder the MSUM crystals formation from 45 h (control group) to 122 h (2 mM CGA), which is the most likely reason that reduces the risk of gout after long-term coffee consumption. Molecular dynamics simulation further indicates that the high interaction energy (E_int) between CGA and MSUM crystal surface and the high electronegativity of CGA both contribute to the restraint of MSUM crystal formation. In conclusion, the fabricated HCM, as the core functional materials of the research platform, presents the understanding of the interaction between coffee consumption and gout control.

Morphological Evolution of Calcite Grown in Zwitterionic Hydrogels: Charge Effects Enhanced by Gel-Incorporation

The incorporation of charged biomacromolecules is widely found in biomineralization. To investigate the significance of this biological strategy for mineralization control, gelatin-incorporated calcite crystals grown from gelatin hydrogels with different charge concentrations along the gel networks are examined. It is found that the bound charged groups on gelatin networks (amino cations, gelatin-NH₃ ⁺ and carboxylic anions, gelatin-COO^- ) play crucial roles in controlling the single-crystallinity and the crystal morphology. And the charge effects are greatly enhanced by the gel-incorporation because the incorporated gel networks force the bound charged groups on them to attach to crystallization fronts. In contrast, ammonium ions (NH₄ ⁺ ) and acetate ions (Ac^- ) dissolve in the crystallization media do not exhibit the similar charge effects because the balance of attachment/detachment make them more difficult to be incorporated. Employing the revealed charge effects, the calcite crystal composites with different morphologies can be flexibly prepared.

Spontaneous and Electrically Induced Anisotropy of Composite Agarose Gels

Agarose gels containing and not bacteriorhodopsin purple membranes (incorporated before gelling) manifest spontaneous optical anisotropy. The dependencies of the anisotropy on the agarose concentration and time have been studied. The rise in the anisotropy is explained by the predominant orientation of the agarose fibers during the gelling and subsequent deformation of the gel net. In the electric field, additional optical anisotropy rises, which is caused by the orientation of the membranes. A procedure has been developed to separate electrically induced and spontaneous anisotropy in composite gels. The isoelectric points and surface electric potential of bacteriorhodopsin trimer and purple membranes are calculated by the method of protein electrostatics to explain their electric asymmetry, which leads to perpendicular orientation in the direct electric field and longitudinal in the kilohertz sinusoidal field. The results allow for an increase in the separation capability of composite gels of electrophoresis for macromolecules with different sizes by applying an appropriate electric field to modulate the effective pore size.

Matrix-Directed Mineralization for Bulk Structural Materials

Mineral-based bulk structural materials (MBSMs) are known for their long history and extensive range of usage. The inherent brittleness of minerals poses a major problem to the performance of MBSMs. To overcome this problem, design principles have been extracted from natural biominerals, in which the extraordinary mechanical performance is achieved via the hierarchical organization of minerals and organics. Nevertheless, precise and efficient fabrication of MBSMs with bioinspired hierarchical structures under mild conditions has long been a big challenge. This Perspective provides a panoramic view of an emerging fabrication strategy, matrix-directed mineralization, which imitates the in vivo growth of some biominerals. The advantages of the strategy are revealed by comparatively analyzing the conventional fabrication techniques of artificial hierarchically structured MBSMs and the biomineral growth processes. By introducing recent advances, we demonstrate that this strategy can be used to fabricate artificial MBSMs with hierarchical structures. Particular attention is paid to the mass transport and the precursors that are involved in the mineralization process. We hope this Perspective can provide some inspiring viewpoints on the importance of biomimetic mineralization in material fabrication and thereby spur the biomimetic fabrication of high-performance MBSMs.

Complex morphologies of biogenic crystals emerge from anisotropic growth of symmetry-related facets

Directing crystal growth into complex morphologies is challenging, as crystals tend to adopt thermodynamically stable morphologies. However, many organisms form crystals with intricate morphologies, as exemplified by coccoliths, microscopic calcite crystal arrays produced by unicellular algae. The complex morphologies of the coccolith crystals were hypothesized to materialize from numerous crystallographic facets, stabilized by fine-tuned interactions between organic molecules and the growing crystals. Using electron tomography, we examined multiple stages of coccolith development in three dimensions. We found that the crystals express only one set of symmetry-related crystallographic facets, which grow differentially to yield highly anisotropic shapes. Morphological chirality arises from positioning the crystals along specific edges of these same facets. Our findings suggest that growth rate manipulations are sufficient to yield complex crystalline morphologies.

Dual pH-/Photo-Responsive Color Switching Systems for Dynamic Rewritable Paper

Smart color switching materials that can change color with a fast response and a high reversibility have attracted increasing attention in color-on-demand applications. However, most of them can only respond to a single stimulus from their external environment, which dramatically limits their broad applications. To address this problem, we report a new strategy in developing a dual pH-/photo-responsive color switching system by coupling the pH-dependent and redox-driven color switchable neutral red (NR) with photoreductive TiO_2-x nanoparticles. The biodegradable TiO_2-x nanoparticles/NR/agarose gel film shows a rapid color switching between yellow and red upon stimulation with acidic/basic vapors in more than 20 cycles because of the protonation and deprotonation process of NR. Moreover, the film shows interesting photoreversible color switching properties under both acidic and basic conditions, including a fast response time and a high reversibility. Taking advantage of the excellent dual pH-/photo-responsive color switching properties, we demonstrated the potential applications of the TiO_2-x nanoparticles/NR/agarose gel film in dynamic rewritable paper, in which the created patterns by photo-printing produce dynamic color changing upon applying an acidic or a basic vapor. We believe that the result will enable a new path for the development of dual- and even multi-responsive color switching systems, broadening their new applications.

Effect of poly(acrylic acid) on crystallization of calcium carbonate in a hydrogel

As carbonate ions are diffused into an agarose hydrogel containing calcium ions and poly(acrylic acid), elliptical and spherical calcites are controllably formed depending on the concentration of poly(acrylic acid) and the position of the hydrogel.

Exploiting and controlling gel-to-crystal transitions in multicomponent supramolecular gels

Multicomponent supramolecular gels provide opportunities to form materials that are not accessible when using the single components alone. Different scenarios are possible when mixing multiple components, from complete co-assembly (mixing of the components within the self-assembled structures formed) to complete self-sorting such that each structure contains only one of the components. Most examples of multicomponent gels that currently exist form stable gels. Here, we show that this can be used to control the mechanical properties of the gels, but what is probably most exciting is that we show that we can use a magnetic field to control the shape of the crystals. The gelling component aligns in a magnetic field and so results in anisotropic crystals being formed.