Tuning the Intermolecular Electron Transfer of Low-Dimensional and Metal-Free BCN/C60 Electrocatalysts via Interfacial Defects for Efficient Hydrogen and Oxygen Electrochemistry

Vacancy Engineering in the First Coordination Shell of Single-Atom Catalysts for Enhanced Hydrogen and Oxygen Evolution Reactions

Modulating the coordination environment of active centers has been proven to be an effective strategy for tuning the activity and selectivity of single-atom catalysts (SACs). However, most current research primarily focuses on altering non-metallic elements coordinating with the single metal atom. In this study, a novel approach is presented by introducing various vacancies into the first coordination shell of single-atom doped boron-carbon-nitride (BCN) catalysts, systematically evaluating their hydrogen evolution (HER) and oxygen evolution (OER) reactions performances. Results indicate that the introduction of vacancy defects enhances the stability of M-BXCYNZ structures. Furthermore, adjusting the coordinating atoms around metal sites modulates charge distribution, influencing the binding propensity of intermediates on the adsorption sites and promoting synergistic effects between metal and nonmetal, thereby altering catalytic activity. Specifically, among 147 M-BXCYNZ and M-BXCYNZ-vacancy structures, 17 catalysts with excellent HER performance have been identified. Notably, C-vacancy modulated Ni-BC2N exhibits an OER overpotential of only 0.36V, suggesting that Ni-BC2N-C1 may serve as an efficient multifunctional electrocatalyst for water-splitting reactions. This work employs vacancy engineering to precisely modulate the first coordination shell of single-atom catalysts, not only screening out efficient HER/OER electrocatalysts but also providing guidance for the development of potential BCN-based multifunctional electrocatalysts.

Built-in electric field in the Mn/C60 heterojunction promotes electrocatalytic nitrogen reduction to ammonia

The electrochemical nitrogen reduction reaction (NRR) has been regarded as a green and promising alternative to the traditional Haber-Bosch process. However, the high bond energy (940.95 kJ mol-1) of the NN triple bond hinders the adsorption and activation of N2 molecules, which is a critical factor restricting the catalytic performance of catalysts and their large-scale applications. Herein, an Mn/C60 heterostructure is constructed via a simple grinding and calcination process and achieves an extraordinary faradaic efficiency of 42.18% and an NH3 yield rate of 14.52 μg h-1 mgcat-1 at -0.4 V vs. RHE in 0.08 M Na2HPO4. Our experimental and theoretical results solidly confirm that the spontaneous charge transfer at the Mn/C60 heterointerface promotes the formation of a built-in electric field, which facilitates the electron transfer from Mn towards C60 and creates localized electrophilic and nucleophilic regions. The formation of the space-charge region effectively optimized the adsorption energy of the key intermediate *NH-*NH2 and also reduced the free energy barrier for the hydrogenation step of *NH-*NH to *NH-*NH2. Furthermore, the calculated lower limiting potential (UL(NRR)) in Mn/C60 relative to the HER (UL(HER)) demonstrates its enhanced selectivity toward the NRR. This work provided new insights into enhancing the activity and performance of electrocatalysts for the NRR by constructing heterojunctions to improve nitrogen adsorption.

Construction of stable Cu+/Cu0 sites at the fullerene/Cu(OH)F interface to boost the electroreduction of CO2 to C2+ products

Herein, the reduction of the Cu oxidation state during the CO2 electro-reduction reaction (CO2RR) is effectively inhibited by depositing C60 supramolecular clusters onto the Cu(OH)F surface. By utilizing the unique electronic buffering capacity of C60, a significant number of Cu0/Cu+ sites are created, leading to a remarkable faradaic efficiency of C2+ products up to 76.9% and exceptional stability.

Density Functional Theory Investigation of 2D Phase Separated Graphene/Hexagonal Boron Nitride Monolayers; Band Gap, Band Edge Positions, and Photo Activity

Creating sustainable and stable semiconductors for energy conversion via catalysis, such as water splitting and carbon dioxide reduction, is a major challenge in modern materials chemistry, propelled by the limited and dwindling reserves of platinum group metals. Two-dimensional hexagonal borocarbonitride (h-BCN) is a metal-free alternative and ternary semiconductor, possessing tunable electronic properties between that of hexagonal boron nitride (h-BN) and graphene, and has attracted significant attention as a nonmetallic catalyst for a host of technologically relevant chemical reactions. Herein, we use density functional theory to investigate the stability and optoelectronic properties of phase-separated monolayer h-BCN structures, varying carbon concentration and domain size. We find that, on average, a higher C content reduces the energetic cost of carbon inclusion per atom, as an increasingly graphitized network lowers the overall energy of the structure. Using functional HSE06, we show how the electronic bandgap of h-BN can be reduced from 5.94 to 1.61 eV with significant substitution of C in the domain (C at. % ∼ 44%) adding to the weight of evidence that suggests these segregated h-BCN systems can easily be customized. We use the location of conduction and valence band edges with respect to the potentials of HER, OER and CO2 reduction to assess the catalytic suitability of these materials, identifying three structures with appropriate band edges for these catalytic reactions. Finally, the photoactivity of the structures is assessed through TD-DFT calculations, and we propose two candidates for photocatalysis based on the segregated h-BCN system.

Janus structural TaON/Graphene-like carbon dual-supported Pt electrocatalyst enables efficient oxygen reduction reaction

Developing carbon-supported Pt-based electrocatalysts with high activity and long-durability for the oxygen reduction reaction (ORR) is an enormous challenge for their commercial applications due to the corrosion of carbon supports in acid/alkaline solution at high potential. In this work, a Janus structural TaON/graphene-like carbon (GLC) was synthesized via an in-situ molecular selfassembly strategy, which was used as a dual-carrier for platinum (Pt). The as-obtained Pt/TaON/GLC presents high half-wave potential (0.94 V vs. RHE), excellent mass (1.48 A mgPt-1) and specific (1.75 mA cmPt-2) activities at 0.9 V, and superior long-term durability with a minimal loss (8.0 %) of mass activity after 10,000 cycles in alkaline solution, outperforming those of Pt/C and other catalysts. The structural characterizations and density functional theory (DFT) calculations indicate that the Pt/TaON/GLC catalyst exhibits the maximum synergies, including enhanced interfacial electron density, improved charge transfer, enhanced O2 adsorption, andsuperimposed OO cleavage. This work shows a potential strategy for preparing the high-active and long-durable Pt-based electrocatalyst by synergism-promoted interface engineering.

Computational screening of single-atom transition metals on boron-rich boron nitride nanosheets for efficient hydrogen evolution catalysis in all pH range

Low-cost and high-efficiency catalysts are of crucial importance for the electrocatalytic hydrogen evolution reaction (HER). Two-dimensional (2D) boron nitride (B-N) compounds formed by the combination of boron and nitrogen atoms of group III and V elements are promising candidates for electrocatalytic HER due to their significant electronic properties. Hence, an electrocatalyst is computer-aided designed with isolated single atoms of 3d, 4d, and 5d transition metals supported on 2D B-N (B2N, B5N3, and B7N5) monolayers to fabricate single-atom catalysts (SACs) with an excellent HER performance. Moreover, pH modulations are considered to improve the HER activity theoretically based on first-principles calculation. Our results indicate that B-N compounds surface doping with transition metal atoms can effectively enhance the HER catalytic performance over a wide range of pH. Among all SACs studied, Co-, Ti-, V-, Nb-, Ru-, Tc-, Zr-, and Os-embedded B2N, Sc-, Cr-, Mn-, Ti-, and Y-embedded B5N3, and Sc- and Mn-embedded B7N5 have excellent catalytic activity under acidic conditions, while Mo-, Ir-, Re-, Ta-, and W-embedded B2N and Ti- and Fe-embedded B7N5 show high catalytic activity under alkaline conditions. Interestingly, Hf@B2N and V@B5N3 systems exhibit promising catalytic activity under acidic, neutral, and alkaline conditions. Our work offers cost-effective candidates with a wide pH range HER performance for exploring ideal electrocatalysts.

Recent Advances on Carbon-Based Metal-Free Electrocatalysts for Energy and Chemical Conversions

Over the last decade, carbon-based metal-free electrocatalysts (C-MFECs) have become important in electrocatalysis. This field is started thanks to the initial discovery that nitrogen atom doped carbon can function as a metal-free electrode in alkaline fuel cells. A wide variety of metal-free carbon nanomaterials, including 0D carbon dots, 1D carbon nanotubes, 2D graphene, and 3D porous carbons, has demonstrated high electrocatalytic performance across a variety of applications. These include clean energy generation and storage, green chemistry, and environmental remediation. The wide applicability of C-MFECs is facilitated by effective synthetic approaches, e.g., heteroatom doping, and physical/chemical modification. These methods enable the creation of catalysts with electrocatalytic properties useful for sustainable energy transformation and storage (e.g., fuel cells, Zn-air batteries, Li-O2 batteries, dye-sensitized solar cells), green chemical production (e.g., H2O2, NH3, and urea), and environmental remediation (e.g., wastewater treatment, and CO2 conversion). Furthermore, significant advances in the theoretical study of C-MFECs via advanced computational modeling and machine learning techniques have been achieved, revealing the charge transfer mechanism for rational design and development of highly efficient catalysts. This review offers a timely overview of recent progress in the development of C-MFECs, addressing material syntheses, theoretical advances, potential applications, challenges and future directions.

Exploration of metal-free 2D electrocatalysts toward the oxygen electroreduction

The advancement of economical and readily available electrocatalysts for the oxygen reduction reaction (ORR) holds paramount importance in the advancement of fuel cells and metal-air batteries. Recently, 2D non-metallic materials have obtained substantial attention as viable alternatives for ORR catalysts due to their manifold advantages, encompassing low cost, ample availability, substantial surface-to-volume ratio, high conductivity, exceptional durability, and competitive activity. The augmented ORR performances observed in metal-free 2D materials typically arise from heteroatom doping, defects, or the formation of heterostructures. Here, the authors delve into the realm of electrocatalysts for the ORR, pivoting around metal-free 2D materials. Initially, the merits of metal-free 2D materials are explored and the reaction mechanism of the ORR is dissected. Subsequently, a comprehensive survey of diverse metal-free 2D materials is presented, tracing their evolutionary journey from fundamental concepts to pragmatic applications in the context of ORR. Substantial importance is given on the exploration of various strategies for enhancing metal-free 2D materials and assessing their impact on inherent material performance, including electronic properties. Finally, the challenges and future prospects that lie ahead for metal-free 2D materials are underscored, as they aspire to serve as efficient ORR electrocatalysts.

Next-Generation Green Hydrogen: Progress and Perspective from Electricity, Catalyst to Electrolyte in Electrocatalytic Water Splitting

Green hydrogen from electrolysis of water has attracted widespread attention as a renewable power source. Among several hydrogen production methods, it has become the most promising technology. However, there is no large-scale renewable hydrogen production system currently that can compete with conventional fossil fuel hydrogen production. Renewable energy electrocatalytic water splitting is an ideal production technology with environmental cleanliness protection and good hydrogen purity, which meet the requirements of future development. This review summarizes and introduces the current status of hydrogen production by water splitting from three aspects: electricity, catalyst and electrolyte. In particular, the present situation and the latest progress of the key sources of power, catalytic materials and electrolyzers for electrocatalytic water splitting are introduced. Finally, the problems of hydrogen generation from electrolytic water splitting and directions of next-generation green hydrogen in the future are discussed and outlooked. It is expected that this review will have an important impact on the field of hydrogen production from water.

Construction of Dual-Active Sites by Interfacing with Polyhydroxy Fullerene on Nickel Hydroxide Surfaces to Promote CO2 Deep Photoreduction to CH4

Due to the complex series of elementary steps involved, achieving deep photoreduction of CO2 to multielectron products such as CH4 remains a challenging task. Therefore, it is crucial to strategically design catalysts that facilitate the controlled formation of the crucial intermediates and provide precise control over the reaction pathway. Herein, we present a pioneering approach by employing polyhydroxy fullerene (PHF) molecules to modify the surface of Ni(OH)2, creating stable and effective synergistic sites to enhance the formation of CH4 from CO2 under light irradiation. As a result, the optimized PHF-modified Ni(OH)2 cocatalyst achieves a CH4 production rate of 455 μmol g-1 h-1, with an electron-based selectivity of approximately 60%. The combination of in situ characterizations and theoretical calculations reveals that the hydroxyl species on the surface of PHF can participate in stabilizing crucial intermediates and facilitating water activation, thereby altering the reaction pathway to form CH4 instead of CO. This study provides a novel approach to regulating the selectivity of photocatalytic CO2 reduction by exploring molecular surface modification through interfacing with functionalized carbon clusters.

Metal-Free Nitrogen-Doped Mesoporous Carbons for the Mild and Selective Synthesis of Pyrroles from Nitroarenes via Cascade Reaction

The cascade synthesis of pyrroles from nitroarenes is an attractive alternative strategy. However, metal catalysts and relatively high temperatures cover the existing reported catalytic systems for this strategy. The development of nonmetallic heterogeneous catalytic systems for the one-pot synthesis of pyrrole from nitroarenes under mild conditions is both worthwhile and challenging. Herein, we describe an exceptionally efficient method for the synthesis of N-substituted pyrroles by the reductive coupling of nitroarenes and diketones over heterogeneous metal-free catalysts under mild conditions. Nonmetallic NC-X catalysts with high activity were prepared from the pyrolysis of well-defined ligands via simple sacrificing hard template methods. Hydrazine hydrate, formic acid, and molecular hydrogen can all be used as reducing agents in the hydrogenation/Paal-Knorr reaction sequence to efficiently synthesize various N-substituted pyrroles, including drugs and bioactive molecules. The catalytic system was featured with good tolerance to sensitive functional groups and no side reactions such as dehalogenation and aromatics hydrogenation. Hammett correlation studies have shown that the electron-donating substituents are beneficial for the one-pot synthesis of N-substituted pyrroles. The results established that the outstanding performance of the catalyst is mainly attributed to the contribution of graphitic N in the catalyst as well as the promotion effect of the mesoporous structure on the reaction.

Localized charge-induced ORR/OER activity in doped fullerenes for Li-air battery applications

Non-aqueous Li-air batteries have garnered significant interest in recent years. The key challenge lies in the development of efficient catalysts to overcome the sluggish kinetics associated with the oxygen reduction reaction (ORR) during discharge and the oxygen evolution reaction (OER) during charging at the cathode. In this work, we conducted a comprehensive study on B/N-doped and BN co-doped fullerenes using first-principles analysis. Our results show significant changes in the geometries, electronic properties, and catalytic behaviors of doped and co-doped fullerenes. The coexistence of boron and nitrogen boosts the formation energy, enhancing stability compared to pristine and single-doped structures. C179B exhibits minimal overpotentials (0.98 V), implying superior catalyst performance for ORR and OER in LABs and significantly better performance than Pt (111) (3.48 V) and standard graphene (3.51 V). The electron-deficient nature of the B atom makes it provide its vacant 2pz orbital for conjugation with the p-electrons of nearby carbon atoms. Consequently, boron serves as a highly active site due to the localization of positive charge, which improves the adsorption of intermediates through oxygen atoms. Moreover, the higher activity of B-doped systems than N-doped systems in lithium-rich environments is opposite to the observed trend in the reported PEM fuel cells. This work introduces doped and co-doped fullerenes as LAB catalysts, offering insights into their tunable ORR/OER activity via doping with various heteroatoms and fullerene size modulation.

Nonmetal Atom Doping Induced Orbital Shifts and Charge Modulation at the Edge of Two-Dimensional Boron Carbonitride Leading to Enhanced Photocatalytic Nitrogen Reduction

Electronic structure, particularly charge state analysis, plays a crucial role in comprehending catalytic mechanisms. This study focuses on metal-free boron carbonitride (BCN) nanosheets as a case study to investigate the impact of heteroatom doping on the charge state of active sites at the edge of two-dimensional (2D) metal-free nanomaterials. Our observations revealed that the doping induces a shift in the frontier py orbital near the Fermi level, accompanied by alterations in its charge state. These changes provide insights into the nitrogen adsorption descriptors and the critical hydrogenation step, ultimately leading to the proposal of a competitive charge transfer mechanism. Additionally, this exploration has led to the screening of five BCN-type structures (P@T1-C1, S@T1-B1, O@T1-B1, P@T1-B1C2, and P@T1-B1C3) with promising nitrogen reduction reaction (NRR) performances. The BCN structure (S@T1-B1) exhibited the lowest NRR overpotential reaching -0.2 V, which is associated with the proposed charge competition mechanism. Furthermore, the investigation delves into the key step hydrogenation mechanism, descriptors, and volcano diagrams of the conformational relationships. In addition, the proposed doping strategy endows the 2D-BCN with more sensitivity toward the solar spectrum, suggesting its application as a potential photocatalyst. Overall, this study establishes a strong foundation for the advancement of nonmetal-atom-doped BCN nanosheets in nitrogen reduction applications, while also providing a versatile framework for fine-tuning edge-site activity within the broader context of two-dimensional photo/electrocatalytic materials.

Data-Driven oriented diatomic doping strategy to customize frequency dispersion for considerable microwave absorption

The electromagnetic (EM) parameters are the key factors to decode the complex microwave absorption properties, including matching thickness, absorption bandwidth and intensity. Numerous works hence have been focused on optimizing EM parameters to reinforce the comprehensive absorption performance, while most of the adopted experimental means still remain in sporadic and random attempts. In this work, the data-driven approach is first employed to forecast that a fierce frequency-dispersion of permittivity is necessary for the broad absorption, and the appropriate magnetic component can mitigate this elusive trend of required permittivity. Oriented by the simulated results, the B/N diatomic doped C/Fe3C magnetoelectric composites are successfully constructed, aiming at the precise regulation of electronic properties to achieve these specially customized EM parameters by forming multi-polarization resonances. The results demonstrate that the introduction of N defects and B defects could enrich the types of dipole pairs (CN, C-B, CNB, vacancy, etc.) and thus activate multi-polarization behavior. The charge density differences calculated by the first-principle further demonstrate that the occupation of B for C bonded with Pyridinic-N and Pyrrolic-N contributes to intense polarization behaviors over the lower frequency range. As a result, excellent microwave absorption properties can be finally achieved with an effective absorbing bandwidth reaching 7.2 GHz at 2.1 mm, implying that the joint use of data-driven and doping engineering strategies to customize frequency dispersion characteristics provides precious guidelines for boosting microwave absorption performance.

Modifying charge transfer between rhodium and ceria for boosted hydrogen oxidation reaction in alkaline electrolyte

Sluggish kinetics of hydrogen oxidation reaction (HOR) in alkaline solution has restricted the rapid development of hydrogen economy. Constructing catalyst with metal-oxide heterostructures can enhance HOR performance; however, little studies concentrate on charge transfer between them, and the corresponding effects on reactions remain unclear. Herein, we report charge-transfer-adjustable CeO2/Rh interfaces uniformly dispersed on multiwalled carbon nanotube (CNT), which exhibit excellent alkaline HOR performance. Results confirm that the charge transfer from Rh to CeO2 could be conveniently tuned via thermal treatment. Consequently, the adsorption free energies of H* in Rh sites and OH* adsorption strength in CeO2 could be adjusted, as corroborated by density functional theory study. The optimized CeO2/Rh interfaces exhibit an exchange current density and a mass-specific kinetic current of 0.53 mA cmPGM-2 and 830 A gPGM-1 at an overpotential of 50 mV, respectively, which surpasses most of the advanced noble-metal-based electrocatalysts. This work provides a new insight of harnessing charge transfer of heterostructure to enhance catalytic activities.

DFT-assisted low-dimensional carbon-based electrocatalysts design and mechanism study: a review

Low-dimensional carbon-based (LDC) materials have attracted extensive research attention in electrocatalysis because of their unique advantages such as structural diversity, low cost, and chemical tolerance. They have been widely used in a broad range of electrochemical reactions to relieve environmental pollution and energy crisis. Typical examples include hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), and nitrogen reduction reaction (NRR). Traditional "trial and error" strategies greatly slowed down the rational design of electrocatalysts for these important applications. Recent studies show that the combination of density functional theory (DFT) calculations and experimental research is capable of accurately predicting the structures of electrocatalysts, thus revealing the catalytic mechanisms. Herein, current well-recognized collaboration methods of theory and practice are reviewed. The commonly used calculation methods and the basic functionals are briefly summarized. Special attention is paid to descriptors that are widely accepted as a bridge linking the structure and activity and the breakthroughs for high-volume accurate prediction of electrocatalysts. Importantly, correlated multiple descriptors are used to systematically describe the complicated interfacial electrocatalytic processes of LDC catalysts. Furthermore, machine learning and high-throughput simulations are crucial in assisting the discovery of new multiple descriptors and reaction mechanisms. This review will guide the further development of LDC electrocatalysts for extended applications from the aspect of DFT computations.

Near-Atomic-Scale Superfine Alloy Clusters for Ultrastable Acidic Hydrogen Electrocatalysis

As a commercial electrode material for proton-exchange membrane water electrolyzers and fuel cells, Pt-based catalysts still face thorny issues, such as insufficient mass activity, stability, and CO tolerance. Here, we construct a bifunctional catalyst consisting of Pt-Er alloy clusters and atomically dispersed Pt and Er single atoms, which exhibits excellent activity, durability, and CO tolerance of acidic hydrogen evolution and oxidation reactions (HER and HOR). The catalyst possesses a remarkably high mass activity and TOF for HER at 63.9 times and 7.2 times more than that of Pt/C, respectively. More impressively, it can operate stably in the acidic electrolyte at 1000 mA cm-2 for more than 1200 h, thereby confirming its potential for practical applications at the industrial current density. In addition, the catalyst also demonstrates a distinguished HOR performance and outstanding CO tolerance. The synergistic effects of active sites give the catalyst exceptional activity for the hydrogen reaction, while the introduction of Er atoms greatly enhances its stability and CO tolerance. This work provides a promising idea for designing low-Pt-loading acidic HER electrocatalysts that are durable at ampere-level current densities and for constructing HOR catalysts with high CO tolerance.

Synergistic effects boosting hydrogen evolution performance of transition metal oxides at ultralow Ru loading levels

In this study, ultralow ruthenium nanoparticles on the nickel molybdate nanorods grown on nickel foam (Ru-NiMoO₄-NF) were synthesized. The Ru-NiMoO₄-NF exhibited outstanding hydrogen evolution reaction performances in alkaline with overpotential of 52 mV at the current density of 10 mA cm^-2. And, it maintains excellent stability for 20 h at the current density of 20 mA cm^-2. The mass activity of Ru-NiMoO₄-NF is 0.21 A mg_Ru ^-1, which is higher than that of Pt/C. Lots of exposed heterojunction interfaces and synergistic effects between Ru nanoparticles and NiMoO₄ nanorods were regarded as the reasons for excellent performance. This work provides an innovative route for developing low-cost catalysts based on the transition metal oxides and trace precious metal with unique heterostructures for hydrogen production through water splitting.

Diversity of platinum-sites at platinum/fullerene interface accelerates alkaline hydrogen evolution

Membrane-based alkaline water electrolyser is promising for cost-effective green hydrogen production. One of its key technological obstacles is the development of active catalyst-materials for alkaline hydrogen-evolution-reaction (HER). Here, we show that the activity of platinum towards alkaline HER can be significantly enhanced by anchoring platinum-clusters onto two-dimensional fullerene nanosheets. The unusually large lattice distance (~0.8 nm) of the fullerene nanosheets and the ultra-small size of the platinum-clusters (~2 nm) leads to strong confinement of platinum clusters accompanied by pronounced charge redistributions at the intimate platinum/fullerene interface. As a result, the platinum-fullerene composite exhibits 12 times higher intrinsic activity for alkaline HER than the state-of-the-art platinum/carbon black catalyst. Detailed kinetic and computational investigations revealed the origin of the enhanced activity to be the diverse binding properties of the platinum-sites at the interface of platinum/fullerene, which generates highly active sites for all elementary steps in alkaline HER, particularly the sluggish Volmer step. Furthermore, encouraging energy efficiency of 74% and stability were achieved for alkaline water electrolyser assembled using platinum-fullerene composite under industrially relevant testing conditions.

Reasonable Design of MXene-Supported Dual-Atom Catalysts with High Catalytic Activity for Hydrogen Evolution and Oxygen Evolution Reaction: A First-Principles Investigation

MXene-supported single-atom catalysts (SACs) for water splitting has attracted extensive attention. However, the easy aggregation of individual metal atoms used as catalytic active centers usually leads to the relatively low loading of synthetic SACs, which limits the development and application of SACs. Herein, by performing first-principles calculations for Pt and 3d transition metal single atoms immobilized on a two-dimensional (2D) Mo2TiC2O2 MXene surface, we systematically studied the performance of heterogeneous dual-atom catalysts (h-DACs) in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Significantly, h-DACs exhibit higher metal atom loading and more flexible active sites compared to SACs. Benefiting from these features, we found that Pt/Cu@Mo2TiC2O2 heterogeneous DACs exhibits excellent HER activity with ultra-low overpotential |ΔGH∗| (0.04 eV), lower than the corresponding Pt@Mo2TiC2O2 (0.14 eV) and Cu@Mo2TiC2O2 (0.33 eV) SACs, and even lower than that of Pt (0.09 eV). Meanwhile, Pt/Ni@Mo2TiC2O2 exhibits superior OER activity with ultra-low overpotential ηOER (0.38 V), lower than that of Pt@Mo2TiC2O2 (1.11 V) and Ni@Mo2TiC2O2 (0.57 V) SACs, and even lower than that of RuO2 (0.42 V) and IrO2 (0.56 V). Our finding paves the way for the rational design of h-DACs for HER and OER with excellent activity, which provides guidance for other catalytic reactions.

Synthesis and Applications of Dimensional SnS2 and SnS2/Carbon Nanomaterials

Dimensional nanomaterials can offer enhanced application properties benefiting from their sizes and morphological orientations. Tin disulfide (SnS₂) and carbon are typical sources of dimensional nanomaterials. SnS₂ is a semiconductor with visible light adsorption properties and has shown high energy density and long cycle life in energy storage processes. The integration of SnS₂ and carbon materials has shown enhanced visible light absorption and electron transmission efficiency. This helps to alleviate the volume expansion of SnS₂ which is a limitation during energy storage processes and provides a favorable bandgap in photocatalytic degradation. Several innovative approaches have been geared toward controlling the size, shape, and hybridization of SnS₂/Carbon composite nanostructures. However, dimensional nanomaterials of SnS₂ and SnS₂/Carbon have rarely been discussed. This review summarizes the synthesis methods of zero-, one-, two-, and three-dimensional SnS₂ and SnS₂/Carbon composite nanomaterials through wet and solid-state synthesis strategies. Moreover, the unique properties that promote their advances in photocatalysis and energy conversion and storage are discussed. Finally, some remarks and perspectives on the challenges and opportunities for exploring advanced SnS₂/Carbon nanomaterials are presented.

Research Progress on Graphite-Derived Materials for Electrocatalysis in Energy Conversion and Storage

High-performance electrocatalysts are critical to support emerging electrochemical energy storage and conversion technologies. Graphite-derived materials, including fullerenes, carbon nanotubes, and graphene, have been recognized as promising electrocatalysts and electrocatalyst supports for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and carbon dioxide reduction reaction (CO₂RR). Effective modification/functionalization of graphite-derived materials can promote higher electrocatalytic activity, stability, and durability. In this review, the mechanisms and evaluation parameters for the above-outlined electrochemical reactions are introduced first. Then, we emphasize the preparation methods for graphite-derived materials and modification strategies. We further highlight the importance of the structural changes of modified graphite-derived materials on electrocatalytic activity and stability. Finally, future directions and perspectives towards new and better graphite-derived materials are presented.

Amorphous Co-Mo-B Film: A High-Active Electrocatalyst for Hydrogen Generation in Alkaline Seawater

The development of efficient electrochemical seawater splitting catalysts for large-scale hydrogen production is of great importance. In this work, we report an amorphous Co-Mo-B film on Ni foam (Co-Mo-B/NF) via a facile one-step electrodeposition process. Such amorphous Co-Mo-B/NF possesses superior activity with a small overpotential of 199 mV at 100 mA cm-2 for a hydrogen evolution reaction in alkaline seawater. Notably, Co-Mo-B/NF also maintains excellent stability for at least 24 h under alkaline seawater electrolysis.

Rational Design of a Low-Dimensional and Metal-free Heterostructure for Efficient Water Oxidation: DFT and Experimental Studies

A nitrogen-doped fullerene dimer is synthesized and compounded with multi-walled carbon nanotubes (MWCNTs) to construct a low-dimensional and metal-free 0D-1D heterostructure for electrocatalytic water oxidation. The (C₅₉N)₂/MWCNTs heterostructure exhibits a highly efficient performance, as verified by both first-principles density functional theory and experimental studies. The *O → *OOH process is confirmed as the rate-determining step of water oxidation. The negatively charged N-doping leads to electronic redistribution and intermolecular charge transfer and thus reduces the uphill free energies of intermediates on the (C₅₉N)₂/MWCNTs interface. Therefore, the (C₅₉N)₂/MWCNTs heterostructure has great potential to emit light and heat in metal-free-based electrocatalytic water oxidation.

Boosting the activity and stability via synergistic catalysis of Co nanoparticles and MoC to construct a bifunctional electrocatalyst for high-performance and long-life rechargeable zinc-air batteries

The high overpotential of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) leading to slow air cathode kinetics is still a major challenge for zinc-air batteries (ZABs), hindering the commercialization of ZABs. With the advantages of cost-effectiveness and feasibility of synthesis at room temperature, zeolite imidazole frameworks (ZIFs) are regarded as advanced precursors. But a majority of ZIF-derived catalysts show only one catalytic activity, which limits their performance in ZABs as well as the cycling stability. In addition, molybdenum carbide (MoC) is recognized as an excellent candidate for renewable energy conversion due to its good chemical resistance and thermal stability. Herein, we report a ZIF-67-derived Co/MoC-NC multiphase doped carbon bifunctional ORR/OER catalyst with multiple active sites for the cathode of ZABs. The synergistic catalysis of Co nanoparticles and MoC nanoparticles in Co/MoC-NC which are embedded in a thin layer of N-doped graphitic carbon and immobilized on N-doped graphitic carbon, respectively, demonstrates superior ORR catalytic performance and durability both under alkaline and acidic conditions (E_1/2 = 0.87 V in 1.0 M KOH and E_1/2 = 0.76 V in 0.5 M H₂SO₄). Simultaneously, Co/MoC-NC also exhibits favorable OER performance (10 mA cm^-2, η = 320 mV) in 1 M KOH. Furthermore, a remarkable peak-power density of 215.36 mW cm^-2 and great cycling stability could be achieved while applying Co/MoC-NC in the cathode of ZABs (over 300 h). This work will provide a viable design concept for designing and synthesizing multifunctional catalysts to construct rechargeable ZABs.

Electrocatalytic activity of metal encapsulated, doped, and engineered fullerene-based nanostructured materials towards hydrogen evolution reaction

The utilization of nanostructured materials as efficient catalyst for several processes has increased tremendously, and carbon-based nanostructured materials encompassing fullerene and its derivatives have been observed to possess enhanced catalytic activity when engineered with doping or decorated with metals, thus making them one of the most promising nanocage catalyst for hydrogen evolution reaction (HER) during electro-catalysis. Prompted by these, and the reported electrochemical, electronic and stability advantage, an attempt is put forward herein to inspect the metal encapsulated, doped, and decorated dependent HER activity of C24 engineered nanostructured materials as effective electro-catalyst for HER. Density functional theory (DFT) calculations have been utilized to evaluate the catalytic hydrogen evolution reaction activity of four proposed bare systems: fullerene (C24), calcium encapsulated fullerene (CaencC24), nickel-doped calcium encapsulated fullerene (NidopCaencC24), and silver decorated nickel-doped calcium encapsulated (AgdecNidopCaencC24) engineered nanostructured materials at the TPSSh/GenECP/6-311+G(d,p)/LanL2DZ level of theory. The obtained results divulged that, a potential decrease in energy gap (Egap) occurred in the bare systems, while a sparing increase was observed upon adsorption of hydrogen onto the surfaces, these surfaces where also observed to maintain the least EH-L gap while the AgdecNidopCaencC24 surface exhibited an increased electrocatalytic activity when compared to others. The results also showed that the electronic properties of the systems evinced a correspondent result with their electrochemical properties, the Ag-decorated surface also exhibited a proficient adsorption energy [Formula: see text] and Gibb's free energy (ΔGH) value. The engineered Ag-decorated and Ni-doped systems were found to possess both good surface stability and excellent electro-catalytic property for HER activities.

Pd-Nanoparticles Embedded Metal-Organic Framework-Derived Hierarchical Porous Carbon Nanosheets as Efficient Electrocatalysts for Carbon Monoxide Oxidation in Different Electrolytes

Rational synthesis of Co-ZIF-67 metal-organic framework (MOF)-derived carbon-supported metal nanoparticles is essential for various energy and environmental applications; however, their catalytic activity toward carbon monoxide (CO) oxidation in various electrolytes is not yet emphasized. Co-ZIF-67-derived hierarchical porous carbon nanosheet-supported Pd nanocrystals (Pd/ZIF-67/C) were prepared using a simple microwave-irradiation approach followed by carbonization and etching. Mechanistically, during microwave irradiation, triethyleneamine provides abundant reducing gases that promote the formation of Pd nanoparticles/Co-N_x in porous carbon nanosheets with the assistance of ethylene glycol and also form a multimodal pore size. The electrocatalytic CO oxidation activity and stability of Pd/ZIF-67/C outperformed those of commercial Pd/C and Pt/C catalysts by (4.2 and 4.4, 4.0 and 2.7, 3.59 and 2.7) times in 0.1 M HClO₄, 0.1 M KOH, and 0.1 M NaHCO₃, respectively, due to the catalytic properties of Pd besides the conductivity of Co-N_x active sites and delicate porous structures of ZIF-67. Notably, using Pd/ZIF-67/C results in a higher CO oxidation activity than Pd/C and Pt/C. This study may pave the way for using MOF-supported multi-metallic nanoparticles for CO oxidation electrocatalysis.

Vanadium Carbide (V4C3) MXene as an Efficient Anode for Li-Ion and Na-Ion Batteries

Li-ion batteries (LIBs) and Na-ion batteries (SIBs) are deemed green and efficient electrochemical energy storage and generation devices; meanwhile, acquiring a competent anode remains a serious challenge. Herein, the density-functional theory (DFT) was employed to investigate the performance of V4C3 MXene as an anode for LIBs and SIBs. The results predict the outstanding electrical conductivity when Li/Na is loaded on V4C3. Both Li2xV4C3 and Na2xV4C3 (x = 0.125, 0.5, 1, 1.5, and 2) showed expected low-average open-circuit voltages of 0.38 V and 0.14 V, respectively, along with a good Li/Na storage capacity of (223 mAhg-1) and a good cycling performance. Furthermore, there was a low diffusion barrier of 0.048 eV for Li0.0625V4C3 and 0.023 eV for Na0.0625V4C3, implying the prompt intercalation/extraction of Li/Na. Based on the findings of the current study, V4C3-based materials may be utilized as an anode for Li/Na-ion batteries in future applications.

Porous spinel-type transition metal oxide nanostructures as emergent electrocatalysts for oxygen reduction reactions

Porous spinel-type transition metal oxide (PS-TMO) nanocatalysts comprising two kinds of metal (denoted as A_xB_3-xO₄, where A, B = Co, Ni, Zn, Mn, Fe, V, Sm, Li, and Zn) have emerged as promising electrocatalysts for oxygen reduction reactions (ORRs) in energy conversion and storage systems (ECSS). This is due to the unique catalytic merits of PS-TMOs (such as p-type conductivity, optical transparency, semiconductivity, multiple valence states of their oxides, and rich active sites) and porous morphologies with great surface area, low density, abundant transportation paths for intermediate species, maximized atom utilization and quick charge mobility. In addition, PS-TMOs nanocatalysts are easily prepared in high yield from Earth-abundant and inexpensive metal precursors that meet sustainability requirements and practical applications. Owing to the continued developments in the rational synthesis of PS-TMOs nanocatalysts for ORRs, it is utterly imperative to provide timely updates and highlight new advances in this research area. This review emphasizes recent research advances in engineering the morphologies and compositions of PS-TMOs nanocatalysts in addition to their mechanisms, to decipher their structure-activity relationships. Also, the ORR mechanisms and fundamentals are discussed, along with the current barriers and future outlook for developing the next generation of PS-TMOs nanocatalysts for large-scale ECSS.

Electrocatalytic activity for proton reduction by a covalent non-metal graphene-fullerene hybrid

A non-metal covalent hybrid of fullerene and graphene was synthesized in one step via fluorographene chemistry. Its electrocatalytic performance for the hydrogen evolution reaction and durability was ascribed to intrahybrid charge-transfer phenomena, exploiting the electron-accepting properties of C60 and the high conductivity and large surface area of graphene.

Magnetic responsive mesoporous alginate/β-cyclodextrin polymer beads enhance selectivity and adsorption of heavy metal ions

Mesoporous (~7-8 nm) biopolymer hydrogel beads (HNTs-FeNPs@Alg/β-CD) were synthesised via ionic polymerisation route to separate heavy metal ions. The adsorption capacity of HNTs-FeNPs@Alg/β-CD was higher than that of raw halloysite nano tubes (HNTs), iron nanoparticles (FeNPs), and bare alginate beads. FeNPs induce the magnetic properties of adsorbent and metal-based functional groups in and around the hydrogel beads. The mesoporous surface of the adsorbent permits access of heavy metal ions onto the polymer beads to interact with internal active sites and the mesoporous polymer network. Maximum adsorption capacities of lead (Pb), copper (Cu), cadmium (Cd), and nickel (Ni) were 21.09 mg/g, 15.54 mg/g, 2.47 mg/g, and 2.68 mg/g, respectively. HNTs-FeNPs@Alg/β-CD was able to adsorb heavy metals efficiently (75-99%) under environment-relevant concentrations (200 μg/L) from mixed metal contaminants. The adsorption and selectivity trends of heavy metals were Pb > Cu > Cd > Ni, despite electrostatic binding strength of Cd > Cu > Pb > Ni and covalent binding strength of Pb > Ni > Cu > Cd. It demonstrated that not only chemosorption but also physisorption acts as the sorption mechanism. The reduction in surface area, porosity, and pore volume of the expended adsorbent, along with sorption study results, confirmed that pore filling and intra-particle diffusion played a considerable role in removing heavy metals.

Ordered Mesoporous Boron Carbon Nitrides with Tunable Mesopore Nanoarchitectonics for Energy Storage and CO2 Adsorption Properties

Porous boron carbon nitride (BCN) is one of the exciting systems with unique electrochemical and adsorption properties. However, the synthesis of low-cost and porous BCN with tunable porosity is challenging, limiting its full potential in a variety of applications. Herein, the preparation of well-defined mesoporous boron carbon nitride (MBCN) with high specific surface area, tunable pores, and nitrogen contents is demonstrated through a simple integration of chemical polymerization of readily available sucrose and borane ammonia complex (BAC) through the nano-hard-templating approach. The bimodal pores are introduced in MBCN by controlling the self-organization of BAC and sucrose molecules within the nanochannels of the template. It is found that the optimized sample shows a high specific capacitance (296 F g-1 at 0.5 A g-1 ), large specific capacity for sodium-ion battery (349 mAg h-1 at 50 mAh g-1 ), and excellent CO2 adsorption capacity (27.14 mmol g-1 at 30 bar). Density functional theory calculations demonstrate that different adsorption sites (BC, BN, CN, and CC) and the large specific surface area strongly support the high adsorption capacity. This finding offers an innovative breakthrough in the design and development of MBCN nanostructures for energy storage and carbon capture applications.

N-Doped Carbon Electrocatalyst: Marked ORR Activity in Acidic Media without the Contribution from Metal Sites?

Fe-N-C electrocatalysts have been demonstrated to be the most promising substitutes for benchmark Pt/C catalysts for the oxygen reduction reaction (ORR). Herein, we report that N-doped carbon materials with trace amounts of iron (0-0.08 wt. %) show excellent ORR activity and durability comparable and even superior to those of Pt/C in both alkaline and acidic media without significant contribution by the metal sites. Such an N-doped carbon (denoted as N-HPCs) features a hollow and hierarchically porous architecture, and more importantly, a noncovalently bonded N-deficient/N-rich heterostructure providing the active sites for oxygen adsorption and activation owing to the efficient electron transfer between the layers. The primary Zn-air battery using N-HPCs as the cathode delivers a much higher power density of 158 mW cm^-2 , and the maximum power density in the H₂ -O₂ fuel cell reaches 486 mW cm^-2 , which is comparable to and even better than those using conventional Fe-N-C catalysts at cathodes.

Controlling the Interfacial Charge Polarization of MOF-Derived 0D-2D vdW Architectures as a Unique Strategy for Bifunctional Oxygen Electrocatalysis

The design of alternative earth-abundant van der Waals (vdW) nanoheterostructures for bifunctional oxygen evolution/reduction (OER/ORR) electrocatalysis is of paramount importance to fabricate energy-related devices. Herein, we report a simple metal-organic framework (MOF)-derived synthetic strategy to fabricate low-dimensional (LD) nanohybrids formed by zero-dimensional (0D) ZrO₂ nanoparticles (NPs) and heteroatom-doped two-dimensional (2D) carbon nanostructures. The 2D platforms controlled the electronic structures of interfacial Zr atoms, thus producing optimized electron polarization for boron and nitrogen-doped carbon (BCN)/ZrO₂ nanohybrids. X-ray photoelectron spectroscopy (XPS) and theoretical studies revealed the key role of the synergistic couple effect of boron (B) and nitrogen (N) in interfacial electronic polarization. The BCN/ZrO₂ nanohybrid showed excellent bifunctional electrocatalytic activity, delivering an overpotential (η₁₀) of 301 mV to reach a current density of 10 mA-cm^-2 for the OER process and a half-wave potential (E_1/2) of 0.85 V vs reversible hydrogen electrode (RHE) for the ORR process, which are comparable to the state-of-the-art LD nanohybrids. Furthermore, BCN/ZrO₂ also showed competitive performances for water-splitting and zinc-air battery devices. This work establishes a new route to fabricate highly efficient multifunctional electrocatalysts by tuning the electronic polarization properties of 0D-2D electrochemical interfaces.

Recent Developments in Carbon-Based Nanocomposites for Fuel Cell Applications: A Review

Carbon-based nanocomposites have developed as the most promising and emerging materials in nanoscience and technology during the last several years. They are microscopic materials that range in size from 1 to 100 nanometers. They may be distinguished from bulk materials by their size, shape, increased surface-to-volume ratio, and unique physical and chemical characteristics. Carbon nanocomposite matrixes are often created by combining more than two distinct solid phase types. The nanocomposites that were constructed exhibit unique properties, such as significantly enhanced toughness, mechanical strength, and thermal/electrochemical conductivity. As a result of these advantages, nanocomposites have been used in a variety of applications, including catalysts, electrochemical sensors, biosensors, and energy storage devices, among others. This study focuses on the usage of several forms of carbon nanomaterials, such as carbon aerogels, carbon nanofibers, graphene, carbon nanotubes, and fullerenes, in the development of hydrogen fuel cells. These fuel cells have been successfully employed in numerous commercial sectors in recent years, notably in the car industry, due to their cost-effectiveness, eco-friendliness, and long-cyclic durability. Further; we discuss the principles, reaction mechanisms, and cyclic stability of the fuel cells and also new strategies and future challenges related to the development of viable fuel cells.

Low-dimensional heterostructures for advanced electrocatalysis: an experimental and computational perspective

Low dimensional electrocatalytic heterostructures have recently attracted significant attention in the catalysis community due to their highly tuneable interfaces and exciting electronic features, opening up new possibilities for effective nanometric control of both the charge carriers and energetic states of several intermediate catalytic species. In-depth understanding of electrocatalytic routes at the interface between two or more low-dimensional nanostructures has triggered the development of heterostructure nanocatalysts with extraordinary properties for water splitting reactions, NRR and CO₂RR. This tutorial review provides an overview of the most recent advances in synthetic strategies for 0D-1D, 0D-2D, and 2D-2D nanoheterostructures, discussing key aspects of their electrocatalytic performances from experimental and computational perspectives as well as their applications towards the development of overall water splitting and Zn-air battery devices.