Three-Dimensional Triptycene-Based Covalent Organic Frameworks with ceq or acs Topology

Sponge-like inorganic-organic S-scheme heterojunction for efficient photocatalytic hydrogen evolution

Covalent organic frameworks (COFs)-based S-scheme heterojunction photocatalysts have gained considerable attention for photocatalytic hydrogen evolution. However, challenges such as limited interfacial contact and low stability persist, primarily due to uneven inorganic semiconductor coverage on the COFs surface. Therefore, constructing inorganic-organic S-scheme heterojunction photocatalysts via the in-situ growth of COFs on inorganic semiconductor surfaces shows great promise. Herein, we successfully developed a sponge-like TiO2@BTTA S-scheme heterojunction with a tight contact interface by in-situ growing COF (referred to as BTTA) on the surface of sponge-like TiO2 (referred to as ST). Density Functional Theory (DFT) calculations confirmed that the ST@BTTA hybrids exhibit the optimal adsorption and desorption capabilities for H2O and H2 molecules, respectively. Notably, the ST@BTTA-120 S-scheme heterojunction photocatalyst demonstrates an outstanding hydrogen production rate under simulated sunlight irradiation, surpassing pristine ST and BTTA by factors of 10.3 and 2.6, respectively. The enhanced photocatalytic performance is attributed to improved solar energy utilization efficiency, a larger specific surface area, and an increased interfacial contact area between ST and BTTA. X-ray photoelectron spectroscopy (XPS) and electron spin resonance (ESR) analyses further verify the S-scheme carrier transfer mechanism in the ST@BTTA hybrids. This research provides a valuable method for designing efficient S-scheme heterojunction photocatalysts with closely integrated interfaces for photocatalytic hydrogen production via water splitting.

High-Connectivity 3D Covalent Organic Frameworks with pdp Net for Efficient C2H2/CO2 Separation

High-connectivity 3D covalent organic frameworks (COFs) have garnered significant attention due to their structural complexity, stability, and potential for functional applications. However, the synthesis of 3D COFs using mixed high-nodal building units remains a substantial challenge. In this work, we introduce two novel 3D COFs, JUC-661 and JUC-662, which are constructed using a combination of D2h-symmetric 8-nodal and D3h-symmetric 6-nodal building blocks. These COFs feature an unprecedented [8+6]-c pdp net with rare mesoporous polyhedral cages (~3.9 nm). Remarkably, JUC-661 and JUC-662 exhibit outstanding separation capabilities, achieving adsorption selectivities of 4.3 and 5.9, respectively, for C2H2/CO2 (1/1, v/v) mixtures. Dynamic breakthrough experiments confirm their excellent separation capability, maintaining this performance even under conditions of 100 % humidity. Monte Carlo simulations and DFT calculations indicate that the exceptional adsorption performance is attributed to the well-defined pore cavities of the COFs, with fluorination of the building unit further enhancing C2H2 selectivity through improved electrostatic and host-guest interactions. This study expands the structural diversity of COFs and highlights their potential for low-energy separation processes.

Efficient Photocatalytic Synthesis of Hydrogen Peroxide Facilitated by Triptycene-Based 3D Covalent Organic Frameworks

Covalent organic frameworks (COFs) are widely studied for hydrogen peroxide (H₂O₂) photosynthesis, with 3D COFs standing out for their porous structures and chemical stability. However, the difficult preparation of 3D COFs and the low efficiency in separating photo-generated electrons and holes (e- and h+) limits the efficient production of H2O2. In this study, two kinds of [6+3] 3D COFs (XJU-1, XJU-2) with significant charge separation, achieving record-breaking H₂O₂ photocatalysis rates of 34 777 and 11 922 µmol g⁻¹ h⁻¹, respectively. XJU-1's superior efficiency stems from its larger pores, enhancing material transport and oxygen (O2) activation. Experimental and theoretical studies have demonstrated that triptycene monomers achieve significant charge separation toward triazine via imine bonds. Moreover, the dimer's smaller singlet-triplet energy gap (∆ES-T) and triptycene's orthogonal configuration enhance singlet oxygen (1O2) production, enabling multiple H2O2 generation pathways. Ultimately, through the oxygen reduction reaction (ORR) pathway, rapid generation of H2O2 can be achieved at multiple catalytic sites. XJU-1 mainly follows a mixed pathway involving 1e--ORR and 2e--ORR, and XJU-2 primarily follows the 2e--ORR pathway, respectively. These open the door of triptycene-based 3D COFs applied in continuous, efficient, and stable photosynthesis of H2O2.

The Importance and Discovery of Highly Connected Covalent Organic Framework Net Topologies

Furthering the field of synthetic organic chemistry from the discrete molecules regime to the extended structure regime, covalent organic frameworks (COFs) represent a new genre of crystalline porous materials featuring designability with molecular-level precision, well-defined porosity, and exceptional stability imparted by the robust covalent linkages reticulating organic molecules. The topology of COFs is a principal feature that regulates their functionality and usability for emerging technologies. Profound comprehension of network topologies and maneuvering them toward targeted applications are crucial to advancing the realm of COF research and developing novel functional materials for exciting breakthroughs. In this Perspective, we discuss the recent research pursuits contributing to the discovery of highly connected COF nets having novel topologies, assess the key challenges to achieving such network topologies, and offer insights into the current scenario and future directions.

Architecting Ultra-Robust Zr(IV) Metal-Organic Framework for Energy-Efficient Desiccant Air Conditioning

Air-conditioning systems, composed mainly of humidity control and heat reallocation units, play a pivotal role in upholding superior air quality and human well-being across diverse environments ranging from international space stations and pharmacies to granaries and cultural relic preservation sites, and to commercial and residential buildings. The adoption of sorbent water as the working pair and low-grade renewable or waste heat in adsorption-driven air-conditioning presents a state-of-the-art solution, notably for its energy efficiency and eco-friendliness vis-à-vis conventional electricity-driven vapor compression cycles. Here, we introduce a rational π-extension strategy to engineer an ultrarobust and highly porous zirconium metal-organic framework (Zr-MOF). This MOF sorbent showcases hysteresis-free S-shaped water sorption isotherms, characterized by a rapid ascent within the 40-60% relative humidity range with a working capacity of 0.63 g g-1, thus facilitating intelligent indoor humidity regulation. Moreover, we demonstrate, for the first time, that this material with such distinctive isotherms can yield a 10 °C temperature lift between ambient and chiller output with a high cooling capacity of 336 kW h m-3 per cycle, even at exceptionally low driving temperatures (below 50 °C), while also delivering a substantial coefficient of performance of 0.96. This material is amenable to scale-up and is chemically ultrastable that can endure strong acids and be cycled for at least 200 runs without compromising any of its capacity. These exceptional attributes signify the viability of this material as a pragmatic alternative for deployment in energy-efficient desiccant air-conditioning systems, particularly in hot and humid climatic regions.

Exploring high-connectivity three-dimensional covalent organic frameworks: topologies, structures, and emerging applications

Covalent organic frameworks (COFs) represent a highly versatile class of crystalline porous materials, formed by the deliberate assembly of organic building units into ordered two-dimensional (2D) and three-dimensional (3D) structures. Their unique combination of topological precision and tunable micro- or mesoporous architectures offers unmatched flexibility in material design. By selecting specific building units, reactive sites, and functional groups, COFs can be engineered to achieve customized skeletal, porous, and interfacial properties, opening the door to materials with optimized performance for diverse applications. Among recent advances, high-connectivity 3D COFs have emerged as a particularly exciting development, with their intricate network structures enabling unprecedented levels of structural complexity, stability, and functionality. This review provides a comprehensive overview of the synthesis strategies, topological design principles, structural characterization techniques, and emerging applications of high-connectivity 3D COFs. We explore their potential across a broad range of cutting-edge applications, including gas adsorption and separation, macromolecule adsorption, dye removal, photocatalysis, electrocatalysis, lithium-sulfur batteries, and charge transport. By examining these key areas, we aim to deepen the understanding of the intricate relationship between structure and function, guiding the rational design of next-generation COF materials. The continued advancements in this field hold immense promise for revolutionizing sectors such as energy storage, catalysis, and molecular separation, making high-connectivity 3D COFs a cornerstone for future technological innovations.

Morphological Tuning of Covalent Organic Framework Single Crystals

The synthesis of high-quality single-crystal covalent organic frameworks (COFs) presents significant challenges, particularly in achieving precise control over their morphologies. Herein, we present a straightforward strategy to fine-tune the morphology of COF single crystals. Using rigid triptycene derivatives as the core building blocks and varying the amounts of aniline modulators, we successfully synthesized a series of high-quality COF single crystals with different aspect ratios and well-defined facets, JUC-663-X (X = 30 to 135, the equivalent of aniline). Their structures were characterized using PXRD, TEM, and N2 adsorption analyses to confirm the structural consistency. The study of the growth mechanism and DFT calculations elucidated the crucial role of aniline as a modulator in facilitating anisotropic competitive binding throughout the crystal growth process. Furthermore, our findings demonstrate that the aspect ratio of these single crystals significantly influences the adsorption properties of Rh B. This research not only paves new paths in the synthesis and morphological control of COF single-crystal materials but also provides profound insights into the relationship between COF morphology and functional performance.

Photocatalytic applications of covalent organic frameworks: synthesis, characterization, and utility

Photocatalysis has emerged as an energy efficient and safe method to perform organic transformations, and many semiconductors have been studied for use as photocatalysts. Covalent organic frameworks (COFs) are an established class of crystalline, porous materials constructed from organic units that are easily tunable. COFs importantly display semiconductor properties and respectable photoelectric behaviour, making them a strong prospect as photocatalysts. In this review, we summarize the design, synthetic methods, and characterization techniques for COFs. Strategies to boost photocatalytic performance are also discussed. Then the applications of COFs as photocatalysts in a variety of reactions are detailed. Finally, a summary, challenges, and future opportunities for the development of COFs as efficient photocatalysts are entailed.

Photons, Excitons, and Electrons in Covalent Organic Frameworks

Covalent organic frameworks (COFs) are created by the condensation of molecular building blocks and nodes to form two-dimensional (2D) or three-dimensional (3D) crystalline frameworks. The diversity of molecular building blocks with different properties and functionalities and the large number of possible framework topologies open a vast space of possible well-defined porous architectures. Besides more classical applications of porous materials such as molecular absorption, separation, and catalytic conversions, interest in the optoelectronic properties of COFs has recently increased considerably. The electronic properties of both the molecular building blocks and their linkage chemistry can be controlled to tune photon absorption and emission, to create excitons and charge carriers, and to use these charge carriers in different applications such as photocatalysis, luminescence, chemical sensing, and photovoltaics. In this Perspective, we will discuss the relationship between the structural features of COFs and their optoelectronic properties, starting with the building blocks and their chemical connectivity, layer stacking in 2D COFs, control over defects and morphology including thin film synthesis, exploring the theoretical modeling of structural, electronic, and dynamic features of COFs, and discussing recent intriguing applications with a focus on photocatalysis and photoelectrochemistry. We conclude with some remarks about present challenges and future prospects of this powerful architectural paradigm.

Vertically Expanded Crystalline Porous Covalent Organic Frameworks

Covalent organic frameworks (COFs) can be developed for molecular confinement and separation. However, their proximate π stacks limit the interlayer distance to be only 3-6 Å, which is too small for guests to enter. As a result, COFs block access to the x-y space and limit guest entry/exit strictly to only the pores along the z direction. Therefore, the extended faces of each layer are hidden between layers, precluding any interactions with guest molecules. Here, we report a strategy for opening interlayer spaces of COFs to attain newly accessible nanospaces between layers. This becomes possible using coordination bonds to replace the conventional π-π stacks between layers. We demonstrate this concept by synthesizing two-dimensional covalent cobalt(II) porphyrin layers through topology-guided polymerization, which were piled up by bidentate axial pillars through coordination bonds with cobalt(II) porphyrin along the z direction, assembling vertically expanded COFs via a one-pot reaction. The resultant frameworks separate the layers with axial pillars and create discrete apertures between layers defined by the molecular length of the pillars. Consequently, the originally inaccessible interlayers are open for guest access, while the polygonal π planes are exposed to trigger various supramolecular interactions. Vapor sorption, breakthrough experiments, and computational studies mutually revealed that the vertically expanded frameworks with optimal interlayer slits induce additional interactions to discriminate benzene and cyclohexane and separate their mixtures efficiently under ambient conditions.

A comprehensive review of covalent organic frameworks (COFs) and their derivatives in environmental pollution control

Covalent organic frameworks (COFs) have gained considerable attention due to their design possibilities as the molecular organic building blocks that can stack in an atomically precise spatial arrangement. Since the inception of COFs in 2005, there has been a continuous expansion in the product range of COFs and their derivatives. This expansion has led to the evolution of three-dimensional structures and various synthetic routes, propelling the field towards large-scale preparation of COFs and their derivatives. This review will offer a holistic analysis and comparison of the spatial structure and synthesis techniques of COFs and their derivatives. The conventional methods of COF synthesis (i.e., ultrasonic chemical, microwave, and solvothermal) are discussed alongside the synthesis strategies of new COFs and their derivatives. Furthermore, the applications of COFs and their derived materials are demonstrated in air, water, and soil pollution management such as gas capture, catalytic conversion, adsorption, and pollutant removal. Finally, this review highlights the current challenges and prospects for large-scale preparation and application of new COFs and the derived materials. In line with the United Nations Sustainable Development Goals (SDGs) and the needs of digital-enabled technologies (AI and machine learning), this review will encompass the future technical trends for COFs in environmental pollution control.

Modulator-Directed Counterintuitive Catenation Control for Crafting Highly Porous and Robust Metal-Organic Frameworks with Record High SO2 Uptake Capacity

Sulfur dioxide (SO2) is an important industrial feedstock that can be directly utilized or catalytically transformed to value-added chemicals such as sulfuric acid. The development of regenerable porous sorbents for the highly efficient storage and energy-minimal release of toxic SO2 operating under ambient conditions has attracted growing interest. Herein, we report the topology-guided construction of highly porous acs-type metal-organic frameworks (MOFs) through a counterintuitive modulator-directed catenation control approach. In contrast to the conventional modulator facilitated coordination competition that favors the thermodynamic catenated phase, we show that the elevation of modulator concentration can promote the formation of the noncatenated phase probably through a sublattice dissolution pathway. The assembly of a custom-designed trigonal prismatic triptycene-quinoxaline linker and trinuclear Fe3O cluster affords either the threefold catenated SJTU-219 or noncatenated SJTU-220 with desired acs net. Impressively, the synthetic approach is applicable to various metal ions, including Al3+, V3+, and even Ti4+. The noncatenated SJTU-220 exhibits an extraordinary SO2 sorption capacity of 29.6 mmol g-1 at 298 K and 1 bar, surpassing all reported solid sorbents. The uptake capacity can be further raised to 35.6 mmol g-1 via the replacement of Fe3+ with kinetically more inert Cr3+, resulting in a staggering ∼329-fold volume reduction compared with free ideal SO2 gas. Computational simulations suggest that unique Fe3+···S(SO2) interactions dominate the SO2 seeding process, facilitating the efficient packing of SO2 molecules in the large channels. Besides, the exceptionally low uptake at the low pressure region implies global weak framework-SO2 interactions, which offer great potential for practically implementing an "easy-on/easy-off" SO2 delivery system.

3D Covalent Organic Frameworks from Design, Synthesis to Applications in Optoelectronics

Covalent organic frameworks (COFs), a new class of crystalline materials connected by covalent bonds, have been developed rapidly in the past decades. However, the research on COFs is mainly focused on two-dimensional (2D) COFs, and the research on three-dimensional (3D) COFs is still in the initial stage. In 2D COFs, the covalent bonds exist only in the 2D flakes and can form 1D channels, which hinder the charge transport to some extent. In contrast, 3D COFs have a more complex pore structure and thus exhibit higher specific surface area and richer active sites, which greatly enhance the 3D charge carrier transport. Therefore, compared to 2D COFs, 3D COFs have stronger applicability in energy storage and conversion, sensing, and optoelectronics. In this review, it is first introduced the design principles for 3D COFs, and in particular summarize the development of conjugated building blocks in 3D COFs, with a special focus on their application in optoelectronics. Subsequently, the preparation of 3D COF powders and thin films and methods to improve the stability and functionalization of 3D COFs are summarized. Moreover, the applications of 3D COFs in electronics are outlined. Finally, conclusions and future research directions for 3D COFs are presented.

Topological Analysis and Structural Determination of 3D Covalent Organic Frameworks

3D covalent organic frameworks (3D COFs) constitute a new type of crystalline materials that consist of a range of porous structures with numerous applications in the fields of adsorption, separation, and catalysis. However, because of the complexity of the three-periodic net structure, it is desirable to develop a thorough structural comprehension, along with a means to precisely determine the actual structure. Indeed, such advancements would considerably contribute to the rational design and application of 3D COFs. In this review, the reported topologies of 3D COFs are introduced and categorized according to the configurations of their building blocks, and a comprehensive overview of diffraction-based structural determination methods is provided. The current challenges and future prospects for these materials will also be discussed.

3D Covalent Organic Framework with "the" Topology

Discovery of new topology covalent organic frameworks (COFs) is a mainstay in reticular chemistry and materials research because it not only serves as a stepwise guide to the designed construction of covalent-organic architectures but also helps to comprehend function from structural design point-of-view. Proceeding on this track, the first 3D COF, TUS-38, with the topology is constructed by reticulating a planar triangular 3-c node of D3h symmetry with a tetragonal prism 8-c node of D2h symmetry via [3 + 8] reversible imine condensation reaction. TUS-38 represents a twofold interpenetrated multidirectional pore network with a high degree of crystallinity and structural integrity. Interestingly, stemming from the nitrogen-rich s-triazine rings with electron-deficient character and ─C ═ N─ linkages composing the TUS-38 framework that benefit to the charge-transfer and hence dipole-dipole electrostatic interactions between the framework and iodine in addition to exclusive topological characteristics of the exotic the net, TUS-38 achieves an exemplary capacity for iodine vapor uptake reaching 6.3 g g-1. Recyclability studies evidence that TUS-38 can be reused at least five times retaining 95% of its initial adsorption capacity; while density functional theory (DFT) calculations have heightened the understanding of the interactions between iodine molecules and the framework.

Three-Dimensional Homochiral Covalent Organic Frameworks with Intrinsic Chiral Topology

Although a variety of chiral porous framework materials have been reported, there are few examples known to combine molecular chirality, helicity, and three-dimensional (3D) intrinsically chiral topology in one structure, which is beneficial for chirality transfer and amplification. Here, we report the synthesis of the first two 3D covalent organic frameworks (COFs) with an intrinsic chiral qzd topology, which exhibit unusual integration of various homochiral and homohelical features. By imine condensation of 4-connected porphyrin tetraamines and 2-connected enantiopure diene dialdehyde, we prepared two isostructural COFs with a noninterpenetrated qzd topology. The specific geometry and conformation flexibility of the V-shaped diene linker control the alignment of square-planar porphyrin units with rotational linkages and facilitate the creation of homochiral extended porous structures that feature a helical arrangement of porphyrins. Post-synthetic metalation of CCOF 23 with Rh(I) affords a heterogeneous catalyst for the asymmetric Michael addition reaction of aryl boronic acids to 2-cyclohexenone, which shows higher enantioselectivities compared to their homogeneous counterparts, presumably due to the confined effect of helical channels. This finding will provide an impetus to explore multichirality materials, offering new insights into the generation and control of helicity, homochirality, and enantioselectivity in the solid state.

Synthesis of 12-Connected Three-Dimensional Covalent Organic Framework with lnj Topology

The structural exploration of three-dimensional covalent organic frameworks (3D COFs) is of great significance to the development of COF materials. Different from structurally diverse MOFs, which have a variety of connectivity (3-24), now the valency of 3D COFs is limited to only 4, 6, and 8. Therefore, the exploration of organic building blocks with higher connectivity is a necessary path to broaden the scope of 3D COF structures. Herein, for the first time, we have designed and synthesized a 12-connected triptycene-based precursor (triptycene-12-CHO) with 12 symmetrical distributions of aldehyde groups, which is also the highest valency reported until now. Based on this unique 12-connected structure, we have successfully prepared a novel 3D COF with lnj topology (termed 3D-lnj-COF). The as-synthesized 3D COF exhibits honeycomb main pores and permanent porosity with a Brunauer-Emmett-Teller surface area of 1159.6 m2 g-1. This work not only provides a strategy for synthesizing precursors with a high connectivity but also provides inspiration for enriching the variety of 3D COFs.

Breaking Dynamic Behavior in 3D Covalent Organic Framework with Pre-Locked Linker Strategy

Due to their large surface area and pore volume, three-dimensional covalent organic frameworks (3D COFs) have emerged as competitive porous materials. However, structural dynamic behavior, often observed in imine-linked 3D COFs, could potentially unlock their potential application in gas storage. Herein, we showed how a pre-locked linker strategy introduces breaking dynamic behavior in 3D COFs. A predesigned planar linker-based 3,8-diamino-6-phenylphenanthridine (DPP) was prepared to produce non-dynamic 3D JUC-595, as the benzylideneamine moiety in DPP locked the linker flexibility and restricted the molecular bond rotation of the imine linkages. Upon solvent inclusion and release, the PXRD profile of JUC-595 remained intake, while JUC-594 with a flexible benzidine linker experienced crystal transformation due to framework contraction-expansion. As a result, the activated JUC-595 achieved higher surface areas (754 m2 g-1) than that of JUC-594 (548 m2 g-1). Furthermore, improved CO2 and CH4 storages were also seen in JUC-595 compared with JUC-594. Impressively, JUC-595 recorded a high normalized H2 storage capacity that surpassed other reported high-surface area 3D COFs. This works shows important insights on manipulating the structural properties of 3D COF to tune gas storage performance.

Three-dimensional covalent organic frameworks with nia nets for efficient separation of benzene/cyclohexane mixtures

The synthesis of three-dimensional covalent organic frameworks with highly connected building blocks presents a significant challenge. In this study, we report two 3D COFs with the nia topology, named JUC-641 and JUC-642, by introducing planar hexagonal and triangular prism nodes. Notably, our adsorption studies and breakthrough experiments reveal that both COFs exhibit exceptional separation capabilities, surpassing previously reported 3D COFs and most porous organic polymers, with a separation factor of up to 2.02 for benzene and cyclohexane. Additionally, dispersion-corrected density functional theory analysis suggests that the good performance of these 3D COFs can be attributed to the incorporation of highly aromatic building blocks and the presence of extensive pore structures. Consequently, this research not only expands the diversity of COFs but also highlights the potential of functional COF materials as promising candidates for environmentally-friendly separation applications.

Covalent Organic Frameworks: Cutting-Edge Materials for Carbon Dioxide Capture and Water Harvesting from Air

The implacable rise of carbon dioxide (CO2 ) concentration in the atmosphere and acute water stress are one of the central challenges of our time. Present-day chemistry is strongly inclined towards more sustainable solutions. Covalent organic frameworks (COFs), attributable to their structural designability with atomic precision, functionalizable chemical environment and robust extended architectures, have demonstrated promising performances in CO2 trapping and water harvesting from air. In this Review, we discuss the major developments in this field as well as sketch out the opportunities and shortcomings that remain over large-scale COF synthesis, device engineering, and long-term performance in real environments.

Zn-Based Metal-Organic Frameworks Using Triptycene Hexacarboxylate Ligands: Synthesis, Structure, and Gas-Sorption Properties

A series of metal-organic frameworks (MOFs) based on zinc ions and two triptycene ligands of different size have been synthesized under solvothermal conditions. Structural analyses revealed that they are isostructural 3D-network MOFs. The high porosity and thermal stability of these MOFs can be attributed to the highly rigid triptycene-based ligands. Their BET specific surface areas depend on the size of the triptycene ligands. In contrast to these surface-area data, the H2 and CO2 adsorption of these MOFs is larger for MOFs with small pores. Consequently, we introduced functional groups to the bridge-head position of the triptycene ligands and investigated their effect on the gas-sorption properties. The results unveiled the role of the functional groups in the specific CO2 binding via an induced interaction between adsorbates and the functional groups. Excellent H2 and CO2 properties in these MOFs were achieved in the absence of open metal sites.

Conjugated Microporous Polymers Based on Octet and Tetratopic Linkers for Efficient Iodine Capture

Radioactive iodine from nuclear waste poses a huge threat to public safety and raises concerns about environmental pollution. There is thus a growing demand for developing novel adsorbents for highly effective iodine capture. In this work, we design and synthesize three novel conjugated microporous polymers, namely, TPE-PyTTA-CMP, TPE-TAPP-CMP, and TPE-TPDA-CMP, which are constructed by an imidization reaction based on octet and tetratopic linkers. The iodine vapor adsorption experiments show that the three CMPs have an excellent iodine adsorption capacity as high as 3.10, 3.67, and 4.68 g·g-1 under 348 K and ambient pressure conditions, respectively. The adsorbed iodine in the CMPs can be released into methanol in a dramatically rapid manner, and their excellent iodine adsorption performance can still be maintained after multiple cycles. In addition, the CMPs demonstrate good adsorption performance in an n-hexane solution of iodine, and the kinetic experimental data follow the pseudo-second-order model. The hierarchical porosity, extended π-conjugated skeleton, and rich electron-donor nitrogen sites of the CMPs could contribute to their excellent iodine adsorption performance. The knowledge information obtained in this work could open up new possibilities for designing novel CMPs targeting a wide range of environment-related applications.

Covalent organic frameworks for CO2 capture: from laboratory curiosity to industry implementation

CO2 concentration in the atmosphere has increased by about 40% since the 1960s. Among various technologies available for carbon capture, adsorption and membrane processes have been receiving tremendous attention due to their potential to capture CO2 at low costs. The kernel for such processes is the sorbent and membrane materials, and tremendous progress has been made in designing and fabricating novel porous materials for carbon capture. Covalent organic frameworks (COFs), a class of porous crystalline materials, are promising sorbents for CO2 capture due to their high surface area, low density, controllable pore size and structure, and preferable stabilities. However, the absence of synergistic developments between materials and engineering processes hinders achieving the qualitative leap for net-zero emissions. Considering the lack of a timely review on the combination of state-of-the-art COFs and engineering processes, in this Tutorial Review, we emphasize the developments of COFs for meeting the challenges of carbon capture and disclose the strategies of fabricating COFs for realizing industrial implementation. Moreover, this review presents a detailed and basic description of the engineering processes and industrial status of carbon capture. It highlights the importance of machine learning in integrating simulations of molecular and engineering levels. We aim to stimulate both academia and industry communities for joined efforts in bringing COFs to practical carbon capture.

Large-Scale Synthesis of Covalent Organic Frameworks: Challenges and Opportunities

Connecting organic building blocks by covalent bonds to design porous crystalline networks has led to covalent organic frameworks (COFs), consequently transferring the flexibility of dynamic linkages from discrete architectures to extended structures. By virtue of the library of organic building blocks and the diversity of dynamic linkages and topologies, COFs have emerged as a novel field of organic materials that propose a platform for tailor-made complex structural design. Progress over the past two decades in the design, synthesis, and functional exploration of COFs in diverse applications successively established these frameworks in materials chemistry. The large-scale synthesis of COFs with uniform structures and properties is of profound importance for commercialization and industrial applications; however, this is in its infancy at present. An innovative designing and synthetic approaches have paved novel ways to address future hurdles. This review article highlights the fundamental of COFs, including designing principles, coupling reactions, topologies, structural diversity, synthetic strategies, characterization, growth mechanism, and activation aspects of COFs. Finally, the major challenges and future trends for large-scale COF fabrication are outlined.

Highly Efficient Dual-Color Luminophores for Sensitive and Selective Detection of Diclazepam Based on MOF/COF Bi-Mesoporous Composites

Currently, studies on electrochemiluminescence (ECL) mainly focused on the single emission of luminophores while those on multi-color ECL were rarely reported. Here, a bi-mesoporous composite of the metal-organic framework (MOF)/covalent-organic framework (COF) with strong and stable dual-color ECL was prepared to construct a novel ECL sensor for sensitive detecting targets. A PTCA-COF with excellent ECL performance was loaded with a great amount of another ECL emitter Cu₃(HHTP)₂. Remarkably, the integrated composite had both ECL properties of PTCA-COF at 520 nm and Cu₃(HHTP)₂ at 600 nm wavelengths. Furthermore, Cu₃(HHTP)₂ with good electron transfer ability can greatly enhance the electrical conductivity and promote electrochemical activation. Thus, the simultaneous enhanced two-color ECL intensity and the catalytic properties of the conductive MOF exerted a dual enhancement effect on the ECL signal of the composite. Significantly, diclazepam can not only be adsorbed well on the multi-stage porous structure MOF/COF composite by π-π interactions but also selectively quench the ECL signal of the PTCA-COF, realizing the sensitive detection. The ECL sensor showed a wide detection range from 1.0 × 10^-13 to 1.0 × 10^-8 g/L, and the limit of detection (LOD) was as low as 2.6 × 10^-14 g/L (S/N = 3). The proposed ECL sensor preparation method was simple and sensitive, providing a new perspective for the potential application of multi-color ECL in the sensing field.

Porous Triptycene Network Based on Tröger's Base for CO2 Capture and Iodine Enrichment

A three-dimensional rigid "six-connected" porous triptycene network based on Tröger's base (TB-PTN) was synthesized by using triptycenes as connectors and Tröger's base as linkers. With characteristics of a high surface area of 1528 m² g^-1, nitrogen-enriched groups, and superior thermal stability, TB-PTN displays a high CO₂ uptake of 22.3 wt % (273 K, 1 bar) and excellent iodine vapor adsorption (240 wt %).

Three-dimensional covalent organic frameworks with pto and mhq-z topologies based on Tri- and tetratopic linkers

Three-dimensional (3D) covalent organic frameworks (COFs) possess higher surface areas, more abundant pore channels, and lower density compared to their two-dimensional counterparts which makes the development of 3D COFs interesting from a fundamental and practical point of view. However, the construction of highly crystalline 3D COF remains challenging. At the same time, the choice of topologies in 3D COFs is limited by the crystallization problem, the lack of availability of suitable building blocks with appropriate reactivity and symmetries, and the difficulties in crystalline structure determination. Herein, we report two highly crystalline 3D COFs with pto and mhq-z topologies designed by rationally selecting rectangular-planar and trigonal-planar building blocks with appropriate conformational strains. The pto 3D COFs show a large pore size of 46 Å with an extremely low calculated density. The mhq-z net topology is solely constructed from totally face-enclosed organic polyhedra displaying a precise uniform micropore size of 1.0 nm. The 3D COFs show a high CO₂ adsorption capacity at room temperature and can potentially serve as promising carbon capture adsorbents. This work expands the choice of accessible 3D COF topologies, enriching the structural versatility of COFs.

Sulfonic-Pendent Vinylene-Linked Covalent Organic Frameworks Enabling Benchmark Potential in Advanced Energy

Both proton exchange membrane fuel cells and uranium-based nuclear techniques represent two green and advanced energies. However, both of them still face some intractable scientific and industrial problems. For the former, established proton-conduction materials always suffer one or another defect such as low proton conductivity, high activation energy, bad durability, or just small-scale product; while for the later, there still lacks available adsorbent to selectively recover of UO₂ ²⁺ from concentrated nitric acid (>1 M) during the spent fuel reprocessing due to the deactivation of the adsorption site or the decomposition of adsorbent under such rigorous conditions. It is found that the above two issues can be well solved by the construction of sulfonic-pendent vinylene-linked covalent organic frameworks (COFs), since these COFs contain abundant sulfonic units for both intrinsic proton conduction and UO₂ ²⁺ capture through strong coordination fixation and vinylene linkage that enhances the stability up to 12 M nitric acid (one of the best materials surviving in 12 M HNO₃ ).

Topological Isomerism in Three-Dimensional Covalent Organic Frameworks

Although isomerism is a typical and significant phenomenon in organic chemistry, it is rarely found in covalent organic framework (COF) materials. Herein, for the first time, we report a controllable synthesis of topological isomers in three-dimensional COFs via a distinctive tetrahedral building unit under different solvents. Based on this strategy, both isomers with a dia or qtz net (termed JUC-620 and JUC-621) have been obtained, and their structures are determined by combining powder X-ray diffraction and transmission electron microscopy. Remarkably, these architectures show a distinct difference in their porous features; for example, JUC-621 with a qtz net exhibits permanent mesopores (up to ∼23 Å) and high surface area (∼2060 m² g^-1), which far surpasses those of JUC-620 with a dia net (pore size of ∼12 Å and surface area of 980 m² g^-1). Furthermore, mesoporous JUC-621 can remove dye molecules efficiently and achieves excellent iodine adsorption (up to 6.7 g g^-1), which is 2.3 times that of microporous JUC-620 (∼2.9 g g^-1). This work thus provides a new way for constructing COF isomers and promotes structural diversity and promising applications of COF materials.

Highly Connected Three-Dimensional Covalent Organic Framework with Flu Topology for High-Performance Li-S Batteries

Lithium-sulfur batteries (LSBs) have been considered as a promising candidate for next-generation energy storage devices, which however still suffer from the shuttle effect of the intermediate lithium polysulfides (LiPSs). Covalent-organic frameworks (COFs) have exhibited great potential as sulfur hosts for LSBs to solve such a problem. Herein, a pentiptycene-based D_2h symmetrical octatopic polyaldehyde, 6,13-dimethoxy-2,3,9,10,18,19,24,25-octa(4'-formylphenyl)pentiptycene (DMOPTP), was prepared and utilized as a building block toward preparing COFs. Condensation of DMOPTP with 4-connected tetrakis(4-aminophenyl)methane affords an expanded [8 + 4] connected network 3D-flu-COF, with a flu topology. The non-interpenetrated nature of the flu topology endows 3D-flu-COF with a high Brunauer-Emmett-Teller surface area of 2860 m² g^-1, large octahedral cavities, and cross-linked tunnels in the framework, enabling a high loading capacity of sulfur (∼70 wt %), strong LiPS adsorption capability, and facile ion diffusion. Remarkably, when used as a sulfur host for LSBs, 3D-flu-COF delivers a high capacity of 1249 mA h g^-1 at 0.2 C (1.0 C = 1675 mA g^-1), outstanding rate capability (764 mA h g^-1 at 5.0 C), and excellent stability, representing one of the best results among the thus far reported COF-based sulfur host materials for LSBs and being competitive with the state-of-the-art inorganic host materials.

Rationally Designed Ionic Covalent Organic Networks (iCONs) with Efficient Antimicrobial Activities

Two unique ionic covalent organic networks (iCONs) incorporated with guanidinium motifs were obtained and characterized by various techniques. Upon 8 h of treatment with iCON-HCCP (250 μg/mL), >97% killing of Staphylococcus aureus, Candida albicans, and Candida glabrata strains was observed. Antimicrobial efficacies against bacteria and fungi were also evident from FE-SEM studies. High antifungal efficacies also correlated well with >60% reduction of ergosterol content, high lipid peroxidation, and membrane damage leading to necrosis.

A Triptycene-Based 2D MOF with Vertically Extended Structure for Improving the Electrocatalytic Performance of CO2 to Methane

Two-dimensional conductive metal-organic frameworks (2D-c-MOFs) have attracted extensive attention owing to their unique structures and physical-chemical properties. However, the planarly extended structure of 2D-c-MOFs usually limited the accessibility of the active sites. Herein, we designed a triptycene-based 2D vertically conductive MOF (2D-vc-MOF) by coordinating 2,3,6,7,14,15-hexahydroxyltriptycene (HHTC) with Cu²⁺ . The vertically extended 2D-vc-MOF(Cu) possesses a weak interlayer interaction, which leads to a facile exfoliation to the nanosheet. Compared with the classical 2D-c-MOFs with planarly extended 2D structures, 2D-vc-MOF(Cu) exhibits a 100 % increased catalytic activity in terms of turnover number and a two-fold increased selectivity. Density functional theory (DFT) calculations further revealed that higher activity originated from the lower energy barriers of the vertically extended 2D structures during the CO₂ reduction reaction process.

Construction of Covalent Organic Frameworks via Multicomponent Reactions

Multicomponent reactions (MCRs) combine at least three reactants to afford the desired product in a highly atom-economic way and are therefore viewed as efficient one-pot combinatorial synthesis tools allowing one to significantly boost molecular complexity and diversity. Nowadays, MCRs are no longer confined to organic synthesis and have found applications in materials chemistry. In particular, MCRs can be used to prepare covalent organic frameworks (COFs), which are crystalline porous materials assembled from organic monomers and exhibit a broad range of properties and applications. This synthetic approach retains the advantages of small-molecule MCRs, not only strengthening the skeletal robustness of COFs, but also providing additional driving forces for their crystallization, and has been used to prepare a series of robust COFs with diverse applications. The present perspective article provides the general background for MCRs, discusses the types of MCRs employed for COF synthesis to date, and addresses the related critical challenges and future perspectives to inspire the MCR-based design of new robust COFs and promote further progress in this emerging field.

Three-Dimensional Covalent Organic Frameworks: From Synthesis to Applications

Three-dimensional covalent organic frameworks (3D COFs) with spatially periodic networks demonstrate significant advantages over their 2D counterparts, including enhanced specific surface areas, interconnected channels, and more sufficiently exposed active sites. Nevertheless, research on these materials has met an impasse due to serious problems in crystallization and stability, which must be solved for practical applications. In this Minireview, we first summarize some strategies for preparing functional 3D COFs, including crystallization techniques and functionalization methods. Hereafter, applications of these functional materials are presented, covering adsorption, separation, catalysis, fluorescence, sensing, and batteries. Finally, the future challenges and perspectives for the development of 3D COFs are discussed.

Reticular Synthesis of One-Dimensional Covalent Organic Frameworks with 4-c sql Topology for Enhanced Fluorescence Emission

Covalent organic frameworks (COFs) have been extensively investigated due to their unique structure, porosity, and functionality. However, at the topological level, COFs remain as two-dimensional (2D) or three-dimensional (3D) structures, while COFs with one-dimensional (1D) topology have not been systematically explored. In this work, we proposed a synthetic strategy for the construction of 1D-COFs based on non-linear edges and suitable high-symmetry vertices. Compared with their 2D-COFs counterparts, the 1D-COFs with AIEgens located at the vertex of the frame exhibited enhanced fluorescence. The density functional theory (DFT) calculations revealed that the dimensional-induced rotation restriction (DIRR) effect could spontaneously introduce additional non-covalent interactions between the strip frames, which could substantially diminish non-radiative transitions. This work also provides protocols for the design of 1D-COFs and a guidance scheme for the synthesis of emitting COFs.

Room-Temperature Preparation of Covalent Organic Framework Membrane for Nanofiltration

The uniquely tunable nature of covalent organic frameworks (COFs), whose pore size and stability can be controlled by choosing diverse organic building blocks and linkage types, makes COFs potential candidates for the membrane separation. Therefore, the preparation of membranes with effective separation efficiency based on COFs has aroused great interest among researchers. Although solvothermal approach has been the most popular method for the preparation of COF membranes, fabricating COF membranes at room temperature (RT) will provide a simple and captivating strategy for separation membranes. Herein, a P-COF membrane on porous alumina substrate at RT, showing 99.7% rejection of rhodamine B and excellent water permeance up to 52 L m^-2 h^-1 bar^-1 , which can effectively purify wastewater is successfully obtained. P-COF is directly grown on alumina to form the composite membrane, which enhances the mechanical strength of COF membrane and avoids the risk of damaging the membrane structure during the transfer process of self-standing membrane. Moreover, P-COF membrane is grown at RT, which is more energy efficient than the conventional solvothermal method. Thus, it is of great significance to obtain COF membranes with excellent nanofiltration performance in a simple and mild condition to alleviate environmental and energy concerns.

Fluorine-Containing Covalent Organic Frameworks: Synthesis and Application

Covalent organic frameworks (COFs) are a type of crystalline porous polymers that possess ordered structures and eternal pores. Because of their unique structural characteristics and diverse functional groups, COFs have been used in various application fields, such as adsorption, catalysis, separation, ion conduction, and energy storage. Among COFs, the fluorine-containing COFs (fCOFs) have been developed for special applications by virtue of special physical and chemical properties resulting from fluorine element, which is a nonmetallic halogen element and possesses strong electronegativity. In the organic chemistry field, introducing fluorine into chemicals enables those chemicals to exhibit many interesting properties, and fluorine chemistry increasingly plays an important role in the history of chemical development. The introduction of fluorine in COFs can enhance the crystallinity, porosity, and stability of COFs, making COFs having superior performances and some new applications. In this review, the synthesis and application of fCOFs are systematically summarized. The application involves photocatalytic production of hydrogen peroxide, photocatalytic water splitting, electrocatalytic CO₂ reduction, adsorption for different substances (H₂ , pesticides, per-/polyfluoroalkyl substances, polybrominated diphenyl ethers, bisphenols, and positively charged organic dye molecules), oil-water separation, energy storage (e.g., zinc-ion batteries, lithium-sulfur batteries), and proton conduction. Perspectives of remaining challenges and possible directions for fCOFs are also discussed.

Three-Dimensional Covalent Organic Framework with Topology for Drug Delivery

Three-dimensional (3D) covalent organic frameworks (COFs) exemplify a new generation of crystalline extended solids with intriguing structures and unprecedented porosity. Notwithstanding substantial scope, the reticular synthesis of 3D COFs from pre-designed building units leading to new network topologies yet remains a demanding task owing to the shortage of 3D building units and inadequate reversibility of the linkages between the building units. In this work, by linking a tetragonal prism (8-connected) node with a square planar (4-connected) node, we report the first 3D COF with scu-c topology. The new COF, namely, TUS-84, features a two-fold interpenetrated structure with well-defined porosity and a Brunauer-Emmett-Teller surface area of 679 m² g^-1. In drug delivery applications, TUS-84 shows efficient drug loading and sustained release profile.

A three dimensional graphdiyne-like porous triptycene network for gas adsorption and separation

Graphdiyne, an emerging carbon allotrope, has attracted many researchers devoted to the study of its synthesis and application. The utilization of graphdiyne in gas adsorption and separation has been predicted by computer simulation with many examples. In this work, the triangular basic unit of graphdiyne was introduced into a triptycene-based porous organic polymer to obtain a three dimensional graphdiyne-like porous triptycene network named G-PTN. With high surface area and a microporous structure, G-PTN exhibited convincing application potential for the storage of gas molecules, especially for the selective adsorption of acetylene over ethylene. Computational simulation proved the importance of the triptycene units and three dimensional structure to the selectivity, as well as the potential of graphdiyne units as selective binding sites, suggesting that through judicious design, new three-dimensional porous graphdiyne could be acquired with better gas adsorption and separation performance.

A CO2 -Masked Carbene Functionalized Covalent Organic Framework for Highly Efficient Carbon Dioxide Conversion

Free N-heterocyclic carbenes (NHCs) are generally prepared by treatment of imidazolium precursors with strong alkali reagents, which usually produces inactive NHC dimers. This treatment would destroy porous supports and thus make supported NHC catalysts difficult to recovery and reuse. Herein, we report the first stable CO₂ -masked N-heterocyclic carbenes (NHCs) grafted on a porous crystalline covalent organic framework (COF). The stable NHC-CO₂ moieties in the COF-NHC-CO₂ could be transformed in situ into isolated NHCs by heating, which exhibit superior catalytic performances in hydrosilylation and N-formylation reactions with CO₂ . The NHC sites can reversibly form NHC-CO₂ and thus can be easily recycled and reused while maintaining excellent catalytic activity. Density functional theory calculations revealed that NHC sites can be fully exposed after removal of CO₂ -masks and rapidly react with silanes, which endows COF-NHC with high catalytic activity.

Three-Dimensional Covalent Organic Frameworks with Topology

Reticular chemistry allows the control of crystalline frameworks at atomic precision according to the predesigned topological structures. However, only a limited number of topological structures of three-dimensional (3D) covalent organic frameworks (COFs) have been established. In this work, we developed a series of 3D COFs with an unprecedented she topology, which were constructed with D_3d- and D_4h-symmetric building blocks. The resulting COFs crystallize in a space group of Im3̅m, in which each D_3d unit connects with six D_4h units to form a noninterpenetrated network with a uniform pore size of 2.0 nm. In addition, these COFs exhibited high crystallinity, excellent porosity, and good chemical and thermal stability. The crystalline structures, composition, and physicochemical properties of these networks were unambiguously characterized. Notably, the inbuilt porphyrin units render these COFs as efficient catalysts for photoredox C-C bond forming and photocatalytic carbon dioxide reduction reactions. Thus, this work constitutes a new approach for the construction of 3D she-net COFs and also enhances the structural diversity and complexity of COFs.

Conjugated Three-Dimensional High-Connected Covalent Organic Frameworks for Lithium-Sulfur Batteries

Developing conjugated three-dimensional (3D) covalent organic frameworks (COFs) still remains an extremely difficult task due to the lack of enough conjugated 3D building blocks. Herein, condensation between an 8-connected pentiptycene-based D_2h building block (DMOPTP) and 4-connected square-planar linkers affords two 3D COFs (named 3D-scu-COF-1 and 3D-scu-COF-2). A combination of the 3D homoaromatic conjugated structure of the former building block with the 2D conjugated structure of the latter linking units enables the π-electron delocalization over the whole frameworks of both COFs, endowing them with excellent conductivities of 3.2-3.5 × 10^-5 S cm^-1. In particular, the 3D rigid quadrangular prism shape of DMOPTP guides the formation of a twofold interpenetrated scu 3D topology and high-connected permanent porosity with a large Brunauer-Emmett-Teller (BET) surface area of 2340 and 1602 m² g^-1 for 3D-scu-COF-1 and 3D-scu-COF-2, respectively, ensuring effective small molecule storage and mass transport characteristics. This, in combination with their good charge transport properties, renders them promising sulfur host materials for lithium-sulfur batteries (LSBs) with high capacities (1035-1155 mA h g^-1 at 0.2 C, 1 C = 1675 mA g^-1), excellent rate capabilities (713-757 mA h g^-1 at 5.0 C), and superior cycling stability (71-83% capacity retention at 2.0 C after 500 cycles), surpassing the most of organic LSB cathodes reported thus far.

Versatile Superatom Complex Nanocluster for the Construction of Framework Materials

Accurately controlling the assembly of nanometer-sized building blocks presents an important but significant challenge for the construction of functional framework materials, which requires the development of highly stable versatile nanosized assembly modules with multiple coordination sites. In this study, [Ag₂₃(SAdm)₁₂]³⁺ (Ag₂₃, in which SAdm = 1-adamantanethiol, i.e., C₁₀H₁₅S), a chiral superatom complex nanocluster, was synthesized and assembled into various topologies. We constructed two kinds of framework materials, i.e., superatom complex inorganic framework (SCIF) and superatom complex organic framework (SCOF) materials, including [Ag₂₃(SAdm)₁₂](SbF₆)₂X (Ag₂₃-1; X = Cl^-/SbF₆^-, a SCIF), [Ag₂₃(SAdm)₁₂](SbF₆)₃ (Ag₂₃-2, a SCIF), [Ag₂₃(SAdm)₁₂](SbF₆)₃(bpy)₃ (Ag₂₃-bpy, a SCOF, in which bpy = 4,4'-bipyridine, i.e., C₁₀H₈N₂), and [Ag₂₃(SAdm)₁₂](SbF₆)₃(dpbz)₃ (Ag₂₃-dpbz, a SCOF, in which dpbz = 1,4-bis(4-pyridyl)benzene, i.e., C₁₆H₁₂N₂), owing to strong interactions between the versatile Ag₂₃ and the inorganic and organic linkers. Ag₂₃-1, Ag₂₃-2, and Ag₂₃-bpy exhibit two superstructures with interpenetrating frameworks and adamantane-like, hexagonal, and cubic topologies, while Ag₂₃-dpbz displays three superstructures with interpenetrating frameworks and cubic topologies. Ag₂₃-dpbz exhibits the largest specific surface area as well as the strongest photoluminescence and electrochemiluminescence signals owing to its dense network arrangement. This work contributes to the construction of nanocluster-based framework materials and helps to elucidate the effect of the assembly mode on the material properties and functionalities.