Structure-Spectroscopy Correlations for Intermediate Q of Soluble Methane Monooxygenase: Insights from QM/MM Calculations

Unidentical Twins: Geometrically Similar but Chemically Distinct Metal-Free Sites in Boron Oxide for Methane Oxidation to HCHO, CO and CO2

Metal-free boron-based catalysts such as boron oxide (B2O3) and boron nitride (h-BN) are promising catalysts for methane oxidation to HCHO and CO. The B2O3 catalyst contains various probable boron sites (B1 to B6), which may be responsible for methane oxidation. In this work, we utilized density functional theory to compare two relevant geometrically identical boron sites (B2 and B4) for their reactivities. The two sites are explored in-detail for the conversion of methane to formaldehyde (M2F), carbon monoxide and carbon dioxide. The B4 site activates the methane C-H bond easily as compared to the B2 site. In M2F conversion, the rate-determining step for the B2 site is the co-activation of dioxygen and methane, whereas over the B4 site, formaldehyde formation is the rate-determining step. The computationally-determined RDS for the B4 site coincides well with the reported experiments. It is further revealed that this site also prefers the formation of CO over CO2, which is in-line with the experiments in literature. It is also shown through orbital analysis that methanol formation does not occur during methane oxidation. We employed descriptors such as condensed Fukui functions and global electrophilicity index to chemically distinct these twin sites.

Correlating Structure with Spectroscopy in Ascorbate Peroxidase Compound II

Structural and spectroscopic investigations of compound II in ascorbate peroxidase (APX) have yielded conflicting conclusions regarding the protonation state of the crucial Fe(IV) intermediate. Neutron diffraction and crystallographic data support an iron(IV)-hydroxo formulation, whereas Mössbauer, X-ray absorption (XAS), and nuclear resonance vibrational spectroscopy (NRVS) studies appear consistent with an iron(IV)-oxo species. Here we examine APX with spectroscopy-oriented QM/MM calculations and extensive exploration of the conformational space for both possible formulations of compound II. We establish that irrespective of variations in the orientation of a vicinal arginine residue and potential reorganization of proximal water molecules and hydrogen bonding, the Fe-O distances for the oxo and hydroxo forms consistently fall within distinct, narrow, and nonoverlapping ranges. The accuracy of geometric parameters is validated by coupled-cluster calculations with the domain-based local pair natural orbital approach, DLPNO-CCSD(T). QM/MM calculations of spectroscopic properties are conducted for all structural variants, encompassing Mössbauer, optical, X-ray absorption, and X-ray emission spectroscopies and NRVS. All spectroscopic observations can be assigned uniquely to an Fe(IV)═O form. A terminal hydroxy group cannot be reconciled with the spectroscopic data. Under no conditions can the Fe(IV)═O distance be sufficiently elongated to approach the crystallographically reported Fe-O distance. The latter is consistent only with a hydroxo species, either Fe(IV) or Fe(III). Our findings strongly support the Fe(IV)═O formulation of APX-II and highlight unresolved discrepancies in the nature of samples used across different experimental studies.

Mechanistic Insights into the N-Hydroxylations Catalyzed by the Binuclear Iron Domain of SznF Enzyme: Key Piece in the Synthesis of Streptozotocin

SznF, a member of the emerging family of heme-oxygenase-like (HO-like) di-iron oxidases and oxygenases, employs two distinct domains to catalyze the conversion of Nω-methyl-L-arginine (L-NMA) into N-nitroso-containing product, which can subsequently be transformed into streptozotocin. Using unrestricted density functional theory (UDFT) with the hybrid functional B3LYP, we have mechanistically investigated the two sequential hydroxylations of L-NMA catalyzed by SznF's binuclear iron central domain. Mechanism B primarily involves the O-O bond dissociation, forming Fe(IV)=O, induced by the H+/e- introduction to the FeA side of μ-1,2-peroxo-Fe2(III/III), the substrate hydrogen abstraction by Fe(IV)=O, and the hydroxyl rebound to the substrate N radical. The stochastic addition of H+/e- to the FeB side (mechanism C) can transition to mechanism B, thereby preventing enzyme deactivation. Two other competing mechanisms, involving the direct O-O bond dissociation (mechanism A) and the addition of H2O as a co-substrate (mechanism D), have been ruled out.

Direct Methane Oxidation by Copper- and Iron-Dependent Methane Monooxygenases

Methane is a potent greenhouse gas that contributes significantly to climate change and is primarily regulated in Nature by methanotrophic bacteria, which consume methane gas as their source of energy and carbon, first by oxidizing it to methanol. The direct oxidation of methane to methanol is a chemically difficult transformation, accomplished in methanotrophs by complex methane monooxygenase (MMO) enzyme systems. These enzymes use iron or copper metallocofactors and have been the subject of detailed investigation. While the structure, function, and active site architecture of the copper-dependent particulate methane monooxygenase (pMMO) have been investigated extensively, its putative quaternary interactions, regulation, requisite cofactors, and mechanism remain enigmatic. The iron-dependent soluble methane monooxygenase (sMMO) has been characterized biochemically, structurally, spectroscopically, and, for the most part, mechanistically. Here, we review the history of MMO research, focusing on recent developments and providing an outlook for future directions of the field. Engineered biological catalysis systems and bioinspired synthetic catalysts may continue to emerge along with a deeper understanding of the molecular mechanisms of biological methane oxidation. Harnessing the power of these enzymes will necessitate combined efforts in biochemistry, structural biology, inorganic chemistry, microbiology, computational biology, and engineering.

DFT mechanistic study of biomimetic diiron complex catalyzed dehydrogenation: Unexpected Fe(III)Fe(III)-1,1-μ-hydroperoxy active species for hydride abstraction

The diiron active site is pivotal in catalyzing transformations in both biological and chemical systems. Recently, a range of biomimetic diiron catalysts have been synthesized, drawing inspiration from the active architecture of soluble methane monooxygenase (sMMO). These catalysts have been successfully deployed for the dehydrogenation of indolines, marking a significant advancement in the field. Using density functional theory (DFT) calculations, we have identified a novel mechanistic pathway that governs the dehydrogenation of indolines catalyzed by a biomimetic diiron complex. Specifically, this reaction is facilitated by the transfer of a hybrid atom from the C1 position of the substrate to the distal oxygen atom of the Fe(III)Fe(III)-1,1-μ-hydroperoxy active species. This transfer serves as the rate-limiting step for the heterolytic cleavage of the OO bond, ultimately generating the substrate cation. The mechanism we propose aligns well with mechanistic investigations incorporating both kinetic isotope effect (KIE) measurements and evaluations of stereochemical selectivity. This research contributes to the broader scientific understanding of catalysis involving biomimetic diiron complexes and offers valuable insights into the catalytic behaviors of non-heme diiron metalloenzymes.

Direct and remote control of electronic structures and redox potentials in μ-oxo diferric complexes

Non-heme diiron enzymes activate O2 for the oxidation of substrates in the form of peroxo FeIII2 or high-valent FeIV2 intermediates. We have developed a dinucleating bis(tetradentate) ligand system that stabilizes peroxo and hydroperoxo FeIII2 complexes with terminal 6-methylpyridine donors, while the peroxo FeIII2 intermediate is reactive with terminal pyridine donors presumably via conversion to a fluent high-valent FeIV2 intermediate. We present here a derivative with electron-donating methoxy substituents at the pyridine donors and its diferric complexes with an {FeIIIX(μ-O)FeIIIX} (X- = Cl-, OAc-, and OH-) or an {FeIII(μ-O)(μ-OAc)FeIII} core. The complex-induced oxidation of EtOH with H2O2 provides μ-OAc-, and in acetone, the complex with mixed OH-/OAc- exogenous donors is obtained. Both reactivities indicate a reactive fluent peroxo FeIII2 intermediate. The coupling constant J and the LMCT transitions are insensitive to the nature of the directly bound ligands X- and reflect mainly the electronic structure of the central {FeIII(μ-O)FeIII} core, while Mössbauer spectroscopy and d-d transitions probe the local FeIII sites. The remote methoxy substituents decrease the potential for the oxidation to FeIV by ∼100 mV, while directly bound OH- in {FeIII(OH)(μ-O)FeIII(OH)} with a short 1.91 Å FeIII-OOH bond decreases the potential by 590 mV compared to {FeIII(OAc)(μ-O)FeIII(OAc)} with a 2.01 Å FeIII-OOAc bond. Interestingly, this FeIII-OH bond is even shorter (1.87 Å) in the mixed OH-/OAc- complex but the potential is the mean value of the potentials of the OH-/OH- and OAc-/OAc- complexes, thus reflecting the electron density of the central {FeIII(μ-O)FeIII} core and not of the local FeIII-OH unit.

Unraveling the Valence State and Reactivity of Copper Centers in Membrane-Bound Particulate Methane Monooxygenase

Particulate methane monooxygenase (pMMO) plays a critical role in catalyzing the conversion of methane to methanol, constituting the initial step in the C1 metabolic pathway within methanotrophic bacteria. However, the membrane-bound pMMO's structure and catalytic mechanism, notably the copper's valence state and genuine active site for methane oxidation, have remained elusive. Based on the recently characterized structure of membrane-bound pMMO, extensive computational studies were conducted to address these long-standing issues. A comprehensive analysis comparing the quantum mechanics/molecular mechanics (QM/MM) molecular dynamics (MD) simulated structures with cryo-EM data indicates that both the CuC and CuD sites tend to stay in the Cu(I) valence state within the membrane environment. Additionally, the concurrent presence of Cu(I) at both CuC and CuD sites leads to the significant reduction of the ligand-binding cavity situated between them, making it less likely to accommodate a reductant molecule such as durohydroquinone (DQH2). Subsequent QM/MM calculations reveal that the CuD(I) site is more reactive than the CuC(I) site in oxygen activation, en route to H2O2 formation and the generation of Cu(II)-O•- species. Finally, our simulations demonstrate that the natural reductant ubiquinol (CoQH2) assumes a productive binding conformation at the CuD(I) site but not at the CuC(I) site. This provides evidence that the true active site of membrane-bound pMMOs may be CuD rather than CuC. These findings clarify pMMO's catalytic mechanism and emphasize the membrane environment's pivotal role in modulating the coordination structure and the activity of copper centers within pMMO.

Mössbauer and Nuclear Resonance Vibrational Spectroscopy Studies of Iron Species Involved in N-N Bond Cleavage

Diketiminate-supported iron complexes are capable of cleaving the strong triple bond of N2 to give a tetra-iron complex with two nitrides (Rodriguez et al., Science, 2011, 334, 780-783). The mechanism of this reaction has been difficult to determine, but a transient green species was observed during the reaction that corresponds to a potential intermediate. Here, we describe studies aiming to identify the characteristics of this intermediate, using a range of spectroscopic techniques, including Mössbauer spectroscopy, electronic absorption spectroscopy, Raman spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and nuclear resonance vibrational spectroscopy (NRVS) complemented by density functional theory (DFT) calculations. We successfully elucidated the nature of the starting iron(II) species and the bis(nitride) species in THF solution, and in each case, THF breaks up the multiiron species. Various observations on the green intermediate species indicate that it has one N2 per two Fe atoms, has THF associated with it, and has NRVS features indicative of bridging N2. Computational models with a formally diiron(0)-N2 core are most consistent with the accumulated data, and on this basis, a mechanism for N2 splitting is suggested. This work shows the power of combining NRVS, Mössbauer, NMR, and vibrational spectroscopies with computations for revealing the nature of transient iron species during N2 cleavage.

Bioinspired microenvironment modulation of metal-organic framework-based catalysts for selective methane oxidation

Inspiration from natural enzymes enabling creationary catalyst design is appealing yet remains extremely challenging for selective methane (CH4) oxidation. This study presents the construction of a biomimetic catalyst platform for CH4 oxidation, which is constructed by incorporating Fe-porphyrin into a robust metal-organic framework, UiO-66, furnished with saturated monocarboxylic fatty acid bearing different long alkyl chains. The catalysts demonstrate the high efficiency in the CH4 to methanol (CH3OH) conversion at 50 °C. Moreover, the selectivity to CH3OH can be effectively regulated and promoted through a fine-tuned microenvironment by hydrophobic modification around the Fe-porphyrin. The long-chain fatty acids anchored on the Zr-oxo cluster of UiO-66 can not only tune the electronic state of the Fe sites to improve CH4 adsorption, but also restrict the amount of H2O2 around the Fe sites to reduce the overoxidation. This behavior resembles the microenvironment regulation in methane monooxygenase, resulting in high CH3OH selectivity.

New Insights into the Cooperativity and Dynamics of Dimeric Enzymes

A survey of protein databases indicates that the majority of enzymes exist in oligomeric forms, with about half of those found in the UniProt database being homodimeric. Understanding why many enzymes are in their dimeric form is imperative. Recent developments in experimental and computational techniques have allowed for a deeper comprehension of the cooperative interactions between the subunits of dimeric enzymes. This review aims to succinctly summarize these recent advancements by providing an overview of experimental and theoretical methods, as well as an understanding of cooperativity in substrate binding and the molecular mechanisms of cooperative catalysis within homodimeric enzymes. Focus is set upon the beneficial effects of dimerization and cooperative catalysis. These advancements not only provide essential case studies and theoretical support for comprehending dimeric enzyme catalysis but also serve as a foundation for designing highly efficient catalysts, such as dimeric organic catalysts. Moreover, these developments have significant implications for drug design, as exemplified by Paxlovid, which was designed for the homodimeric main protease of SARS-CoV-2.

Dissecting the Molecular Origin of g-Tensor Heterogeneity and Strain in Nitroxide Radicals in Water: Electron Paramagnetic Resonance Experiment versus Theory

Nitroxides are common EPR sensors of microenvironmental properties such as polarity, numbers of H-bonds, pH, and so forth. Their solvation in an aqueous environment is facilitated by their high propensity to form H-bonds with the surrounding water molecules. Their g- and A-tensor elements are key parameters to extracting the properties of their microenvironment. In particular, the gxx value of nitroxides is rich in information. It is known to be characterized by discrete values representing nitroxide populations previously assigned to have different H-bonds with the surrounding waters. Additionally, there is a large g-strain, that is, a broadening of g-values associated with it, which is generally correlated with environmental and structural micro-heterogeneities. The g-strain is responsible for the frequency dependence of the apparent line width of the EPR spectra, which becomes evident at high field/frequency. Here, we address the molecular origin of the gxx heterogeneity and of the g-strain of a nitroxide moiety (HMI: 2,2,3,4,5,5-hexamethylimidazolidin-1-oxyl, C9H19N2O) in water. To treat the solvation effect on the g-strain, we combined a multi-frequency experimental approach with ab initio molecular dynamics simulations for structural sampling and quantum chemical EPR property calculations at the highest realistically affordable level, including an explicitly micro-solvated HMI ensemble and the embedded cluster reference interaction site model. We could clearly identify the distinct populations of the H-bonded nitroxides responsible for the gxx heterogeneity experimentally observed, and we dissected the role of the solvation shell, H-bond formation, and structural deformation of the nitroxide in the creation of the g-strain associated with each nitroxide subensemble. Two contributions to the g-strain were identified in this study. The first contribution depends on the number of hydrogen bonds formed between the nitroxide and the solvent because this has a large and well-understood effect on the gxx-shift. This contribution can only be resolved at high resonance frequencies, where it leads to distinct peaks in the gxx region. The second contribution arises from configurational fluctuations of the nitroxide that necessarily lead to g-shift heterogeneity. These contributions cannot be resolved experimentally as distinct resonances but add to the line broadening. They can be quantitatively analyzed by studying the apparent line width as a function of microwave frequency. Interestingly, both theory and experiment confirm that this contribution is independent of the number of H-bonds. Perhaps even more surprisingly, the theoretical analysis suggests that the configurational fluctuation broadening is not induced by the solvent but is inherently present even in the gas phase. Moreover, the calculations predict that this broadening decreases upon solvation of the nitroxide.

Computational Discovery of Stable Metal-Organic Frameworks for Methane-to-Methanol Catalysis

The challenge of direct partial oxidation of methane to methanol has motivated the targeted search of metal-organic frameworks (MOFs) as a promising class of materials for this transformation because of their site-isolated metals with tunable ligand environments. Thousands of MOFs have been synthesized, yet relatively few have been screened for their promise in methane conversion. We developed a high-throughput virtual screening workflow that identifies MOFs from a diverse space of experimental MOFs that have not been studied for catalysis, yet are thermally stable, synthesizable, and have promising unsaturated metal sites for C-H activation via a terminal metal-oxo species. We carried out density functional theory calculations of the radical rebound mechanism for methane-to-methanol conversion on models of the secondary building units (SBUs) from 87 selected MOFs. While we showed that oxo formation favorability decreases with increasing 3d filling, consistent with prior work, previously observed scaling relations between oxo formation and hydrogen atom transfer (HAT) are disrupted by the greater diversity in our MOF set. Accordingly, we focused on Mn MOFs, which favor oxo intermediates without disfavoring HAT or leading to high methanol release energies─a key feature for methane hydroxylation activity. We identified three Mn MOFs comprising unsaturated Mn centers bound to weak-field carboxylate ligands in planar or bent geometries with promising methane-to-methanol kinetics and thermodynamics. The energetic spans of these MOFs are indicative of promising turnover frequencies for methane to methanol that warrant further experimental catalytic studies.

Spectroscopic Properties of a Biologically Relevant [Fe2 (μ-O)2 ] Diamond Core Motif with a Short Iron-Iron Distance

Diiron cofactors in enzymes perform diverse challenging transformations. The structures of high valent intermediates (Q in methane monooxygenase and X in ribonucleotide reductase) are debated since Fe-Fe distances of 2.5-3.4 Å were attributed to "open" or "closed" cores with bridging or terminal oxido groups. We report the crystallographic and spectroscopic characterization of a Fe^III ₂ (μ-O)₂ complex (2) with tetrahedral (4C) centres and short Fe-Fe distance (2.52 Å), persisting in organic solutions. 2 shows a large Fe K-pre-edge intensity, which is caused by the pronounced asymmetry at the T_D Fe^III centres due to the short Fe-μ-O bonds. A ≈2.5 Å Fe-Fe distance is unlikely for six-coordinate sites in Q or X, but for a Fe₂ (μ-O)₂ core containing four-coordinate (or by possible extension five-coordinate) iron centres there may be enough flexibility to accommodate a particularly short Fe-Fe separation with intense pre-edge transition. This finding may broaden the scope of models considered for the structure of high-valent diiron intermediates formed upon O₂ activation in biology.

Comparative oxidative ability of mononuclear and dinuclear high-valent iron-oxo species towards the activation of methane: does the axial/bridge atom modulate the reactivity?

Over the years, mononuclear Fe^IVO species have been extensively studied, but the presence of dinuclear Fe^IVO species in soluble methane monooxygenase (sMMO) has inspired the development of biomimic models that could activate inert substrates such as methane. There are some successful attempts; particularly the [(Por)(m-CBA) Fe^IV(μ-N)Fe^IV(O)(Por˙⁺)]^- species has been reported to activate methane and yield decent catalytic turnover numbers and therefore regarded as the closest to the sMMO enzyme functional model, as no mononuclear Fe^IVO analogues could achieve this feat. In this work, we have studied a series of mono and dinuclear models using DFT and ab initio DLPNO-CCSD(T) calculations to probe the importance of nuclearity in enhancing the reactivity. We have probed the catalytic activities of four complexes: [(HO)Fe^IV(O)(Por)]^- (1), [(HO)Fe^IV(O)(Por˙⁺)] (2), μ-oxo dinuclear iron species [(Por)(m-CBA)Fe^IV(μ-O)Fe^IV(O) (Por˙⁺)]^- (3) and N-bridged dinuclear iron species [(Por)(m-CBA)Fe^IV(μ-N)Fe^IV(O)(Por˙⁺)]^- (4) towards the activation of methane. Additionally, calculations were performed on the mononuclear models [(X)Fe^IV(O)(Por˙⁺)]ⁿ {X = N 4a (n = -2), NH 4b (n = -1) and NH₂4c (n = 0)} to understand the role of nuclearity in the reactivity. DFT calculations performed on species 1-4 suggest an interesting variation among them, with species 1-3 possessing an intermediate spin (S = 1) as a ground state and species 4 possessing a high-spin (S = 2) as a ground state. Furthermore, the two Fe^IV centres in species 3 and 4 are antiferromagnetically coupled, yielding a singlet state with a distinct difference in their electronic structure. On the other hand, species 2 exhibits a ferromagnetic coupling between the Fe^IV and the Por˙⁺ moiety. Our calculations suggest that the higher barriers for the C-H bond activation of methane and the rebound step for species 1 and 3 are very high in energy, rendering them unreactive towards methane, while species 2 and 4 have lower barriers, suggesting their reactivity towards methane. Studies on the system reveal that model 4a has multiple FeN bonds facilitating greater reactivity, whereas the other two models have longer Fe-N bonds and less radical character with steeper barriers. Strong electronic cooperativity is found to be facilitated by the bridging nitride atom, and this cooperativity is suppressed by substituents such as oxygen, rendering them inactive. Thus, our study unravels that apart from enhancing the nuclearity, bridging atoms that facilitate strong cooperation between the metals are required to activate very inert substrates such as methane, and our results are broadly in agreement with earlier experimental findings.

Methane Activation by a Mononuclear Copper Active Site in the Zeolite Mordenite: Effect of Metal Nuclearity on Reactivity

The direct conversion of methane to methanol would have a wide reaching environmental and industrial impact. Copper-containing zeolites can perform this reaction at low temperatures and pressures at a previously defined O₂-activated [Cu₂O]²⁺ site. However, after autoreduction of the copper-containing zeolite mordenite and removal of the [Cu₂O]²⁺ active site, the zeolite is still methane reactive. In this study, we use diffuse reflectance UV-vis spectroscopy, magnetic circular dichroism, resonance Raman spectroscopy, electron paramagnetic resonance, and X-ray absorption spectroscopy to unambiguously define a mononuclear [CuOH]⁺ as the CH₄ reactive active site of the autoreduced zeolite. The rigorous identification of a mononuclear active site allows a reactivity comparison to the previously defined [Cu₂O]²⁺ active site. We perform kinetic experiments to compare the reactivity of the [CuOH]⁺ and [Cu₂O]²⁺ sites and find that the binuclear site is significantly more reactive. From the analysis of density functional theory calculations, we elucidate that this increased reactivity is a direct result of stabilization of the [Cu₂OH]²⁺ H-atom abstraction product by electron delocalization over the two Cu cations via the bridging ligand. This significant increase in reactivity from electron delocalization over a binuclear active site provides new insights for the design of highly reactive oxidative catalysts.

Determination of the iron(IV) local spin states of the Q intermediate of soluble methane monooxygenase by Kβ X-ray emission spectroscopy

Soluble methane monooxygenase (sMMO) facilitates the conversion of methane to methanol at a non-heme Fe^IV₂ intermediate MMOH_Q, which is formed in the active site of the sMMO hydroxylase component (MMOH) during the catalytic cycle. Other biological systems also employ high-valent Fe^IV sites in catalysis; however, MMOH_Q is unique as Nature’s only identified Fe^IV₂ intermediate. Previous ⁵⁷Fe Mössbauer spectroscopic studies have shown that MMOH_Q employs antiferromagnetic coupling of the two Fe^IV sites to yield a diamagnetic cluster. Unfortunately, this lack of net spin prevents the determination of the local spin state (S_loc) of each of the irons by most spectroscopic techniques. Here, we use Fe Kβ X-ray emission spectroscopy (XES) to characterize the local spin states of the key intermediates of the sMMO catalytic cycle, including MMOH_Q trapped by rapid-freeze-quench techniques. A pure XES spectrum of MMOH_Q is obtained by subtraction of the contributions from other reaction cycle intermediates with the aid of Mössbauer quantification. Comparisons of the MMOH_Q spectrum with those of known S_loc = 1 and S_loc = 2 Fe^IV sites in chemical and biological models reveal that MMOH_Q possesses S_loc = 2 iron sites. This experimental determination of the local spin state will help guide future computational and mechanistic studies of sMMO catalysis.

On the choice of shape and size for truncated cluster-based X-ray spectral simulations of 2D materials

Truncated cluster models represent an effective way for simulating X-ray spectra of 2D materials. Here we systematically assessed the influence of two key parameters, the cluster shape (honeycomb, rectangle, or parallelogram) and size, in X-ray photoelectron (XPS) and absorption (XAS) spectra simulations of three 2D materials at five K-edges (graphene, C 1s; C3N, C/N 1s; h-BN, B/N 1s) to pursue the accuracy limit of binding energy (BE) and spectral profile predictions. Several recent XPS experiments reported BEs with differences spanning 0.3, 1.5, 0.7, 0.3, and 0.3 eV, respectively. Our calculations favor the honeycomb model for stable accuracy and fast size convergence, and a honeycomb with ~10 nm side length (120 atoms) is enough to predict accurate 1s BEs for all 2D sheets. Compared to all these experiments, predicted BEs show absolute deviations as follows: 0.4-0.7, 0.0-1.0, 0.4-1.1, 0.6-0.9, and 0.1-0.4 eV. A mean absolute deviation of 0.3 eV was achieved if we compare only to the closest experiment. We found that the sensitivity of computed BEs to different model shapes depends on systems: graphene, sensitive; C3N, weak; h-BN, very weak. This can be attributed to their more or less delocalized π electrons in this series. For this reason, a larger cluster size is required for graphene than the other two to reproduce fine structures in XAS. The general profile of XAS shows weak dependence to model shape. Our calculations provide optimal parameters and accuracy estimations that are useful for X-ray spectral simulations of general graphene-like 2D materials.

Second coordination sphere effects on the mechanistic pathways for dioxygen activation by a ferritin: involvement of a Tyr radical and the identification of a cation binding site

Ferritins are ubiquitous diiron enzymes involved in iron(II) detoxification and oxidative stress responses and can act as metabolic iron stores. The overall reaction mechanisms of ferritin enzymes are still unclear, particularly concerning the role of the conserved, near catalytic center Tyr residue. Thus, we carried out a computational study of a ferritin using a large cluster model of well over 300 atoms including its first- and second-coordination sphere. The calculations reveal important insight into the structure and reactivity of ferritins. Specifically, the active site Tyr residue delivers a proton and electron in the catalytic cycle prior to iron(II) oxidation. In addition, the calculations highlight a likely cation binding site at Asp65, which through long-range electrostatic interactions, influences the electronic configuration and charge distributions of the metal center. The results are consistent with experimental observations but reveal novel detail of early mechanistic steps that lead to an unusual mixed-valent iron(III)-iron(II) center.

Electron Transfer to Hydroxylase through Component Interactions in Soluble Methane Monooxygenase

The hydroxylation of methane (CH₄) is crucial to the field of environmental microbiology, owing to the heat capacity of methane, which is much higher than that of carbon dioxide (CO₂). Soluble methane monooxygenase (sMMO), a member of the bacterial multicomponent monooxygenase (BMM) superfamily, is essential for the hydroxylation of specific substrates, including hydroxylase (MMOH), regulatory component (MMOB), and reductase (MMOR). The diiron active site positioned in the MMOH α-subunit is reduced through the interaction of MMOR in the catalytic cycle. The electron transfer pathway, however, is not yet fully understood due to the absence of complex structures with reductases. A type II methanotroph, Methylosinus sporium 5, successfully expressed sMMO and hydroxylase, which were purified for the study of the mechanisms. Studies on the MMOH-MMOB interaction have demonstrated that Tyr76 and Trp78 induce hydrophobic interactions through π-π stacking. Structural analysis and sequencing of the ferredoxin domain in MMOR (MMOR-Fd) suggested that Tyr93 and Tyr95 could be key residues for electron transfer. Mutational studies of these residues have shown that the concentrations of flavin adenine dinucleotide (FAD) and iron ions are changed. The measurements of dissociation constants (K_ds) between hydroxylase and mutated reductases confirmed that the binding affinities were not significantly changed, although the specific enzyme activities were significantly reduced by MMOR-Y93A. This result shows that Tyr93 could be a crucial residue for the electron transfer route at the interface between hydroxylase and reductase.

Explorations of the nonheme high-valent iron-oxo landscape: crystal structure of a synthetic complex with an [FeIV2(μ-O)2] diamond core relevant to the chemistry of sMMOH

Methanotrophic bacteria utilize methane monooxygenase (MMO) to carry out the first step in metabolizing methane. The soluble enzymes employ a hydroxylase component (sMMOH) with a nonheme diiron active site that activates O₂ and generates a powerful oxidant capable of converting methane to methanol. It is proposed that the diiron(II) center in the reduced enzyme reacts with O₂ to generate a diferric-peroxo intermediate called P that then undergoes O-O cleavage to convert into a diiron(IV) derivative called Q, which carries out methane hydroxylation. Most (but not all) of the spectroscopic data of Q accumulated by various groups to date favor the presence of an FeIV2(μ-O)₂ unit with a diamond core. The Que lab has had a long-term interest in making synthetic analogs of iron enzyme intermediates. To this end, the first crystal structure of a complex with a Fe^IIIFe^IV(μ-O)₂ diamond core was reported in 1999, which exhibited an Fe⋯Fe distance of 2.683(1) Å. Now more than 20 years later, a complex with an FeIV2(μ-O)₂ diamond core has been synthesized in sufficient purity to allow diffraction-quality crystals to be grown. Its crystal structure has been solved, revealing an Fe⋯Fe distance of 2.711(4) Å for comparison with structural data for related complexes with lower iron oxidation states.

A Combined Spectroscopic and Computational Study on the Mechanism of Iron-Catalyzed Aminofunctionalization of Olefins Using Hydroxylamine Derived N-O Reagent as the "Amino" Source and "Oxidant"

Herein, we study the mechanism of iron-catalyzed direct synthesis of unprotected aminoethers from olefins by a hydroxyl amine derived reagent using a wide range of analytical and spectroscopic techniques (Mössbauer, Electron Paramagnetic Resonance, Ultra-Violet Visible Spectroscopy, X-ray Absorption, Nuclear Resonance Vibrational Spectroscopy, and resonance Raman) along with high-level quantum chemical calculations. The hydroxyl amine derived triflic acid salt acts as the “oxidant” as well as “amino” group donor. It activates the high-spin Fe(II) (S_t = 2) catalyst [Fe(acac)₂(H₂O)₂] (1) to generate a high-spin (S_t = 5/2) intermediate (Int I), which decays to a second intermediate (Int II) with S_t = 2. The analysis of spectroscopic and computational data leads to the formulation of Int I as [Fe(III)(acac)₂-N-acyloxy] (an alkyl-peroxo-Fe(III) analogue). Furthermore, Int II is formed by N–O bond homolysis. However, it does not generate a high-valent Fe(IV)(NH) species (a Fe(IV)(O) analogue), but instead a high-spin Fe(III) center which is strongly antiferromagnetically coupled (J = −524 cm^–1) to an iminyl radical, [Fe(III)(acac)₂-NH·], giving S_t = 2. Though Fe(NH) complexes as isoelectronic surrogates to Fe(O) functionalities are known, detection of a high-spin Fe(III)-N-acyloxy intermediate (Int I), which undergoes N–O bond cleavage to generate the active iron–nitrogen intermediate (Int II), is unprecedented. Relative to Fe(IV)(O) centers, Int II features a weak elongated Fe–N bond which, together with the unpaired electron density along the Fe–N bond vector, helps to rationalize its propensity for N-transfer reactions onto styrenyl olefins, resulting in the overall formation of aminoethers. This study thus demonstrates the potential of utilizing the iron-coordinated nitrogen-centered radicals as powerful reactive intermediates in catalysis.

A mono-oxo-bridged binuclear iron(iii) complex with a Fe–O–Fe angle of 180.0° and its catalytic activity for hydrogen evolution

There are potential applications for binuclear oxo-bridged iron complexes in biological processes, catalysts, and magnetic materials, and the design of new bridged-iron complexes is important.

Catalytic properties of the ferryl ion in the solid state: a computational review

This review summarises the last findings in the emerging field of heterogeneous catalytic oxidation of light alkanes by ferryl species supported on solid-state systems such as the conversion of methane into methanol by FeO-MOF74.

Nuclear Resonance Vibrational Spectroscopic Definition of the Fe(IV)2 Intermediate Q in Methane Monooxygenase and Its Reactivity

Methanotrophic bacteria utilize the nonheme diiron enzyme soluble methane monooxygenase (sMMO) to convert methane to methanol in the first step of their metabolic cycle under copper-limiting conditions. The structure of the sMMO Fe(IV)₂ intermediate Q responsible for activating the inert C-H bond of methane (BDE = 104 kcal/mol) remains controversial, with recent studies suggesting both "open" and "closed" core geometries for its active site. In this study, we employ nuclear resonance vibrational spectroscopy (NRVS) to probe the geometric and electronic structure of intermediate Q at cryogenic temperatures. These data demonstrate that Q decays rapidly during the NRVS experiment. Combining data from several years of measurements, we derive the NRVS vibrational features of intermediate Q as well as its cryoreduced decay product. A library of 90 open and closed core models of intermediate Q is generated using density functional theory to analyze the NRVS data of Q and its cryoreduced product as well as prior spectroscopic data on Q. Our analysis reveals that a subset of closed core models reproduce these newly acquired NRVS data as well as prior data. The reaction coordinate with methane is also evaluated using both closed and open core models of Q. These studies show that the potent reactivity of Q toward methane resides in the "spectator oxo" of its Fe(IV)₂O₂ core, in contrast to nonheme mononuclear Fe(IV)═O enzyme intermediates that H atoms abstract from weaker C-H bonds.

C-H Bond Cleavage by Bioinspired Nonheme Metal Complexes

The functionalization of C-H bonds is one of the most challenging transformations in synthetic chemistry. In biology, these processes are well-known and are achieved with a variety of metalloenzymes, many of which contain a single metal center within their active sites. The most well studied are those with Fe centers, and the emerging experimental data show that high-valent iron oxido species are the intermediates responsible for cleaving the C-H bond. This Forum Article describes the state of this field with an emphasis on nonheme Fe enzymes and current experimental results that provide insights into the properties that make these species capable of C-H bond cleavage. These parameters are also briefly considered in regard to manganese oxido complexes and Cu-containing metalloenzymes. Synthetic iron oxido complexes are discussed to highlight their utility as spectroscopic and mechanistic probes and reagents for C-H bond functionalization. Avenues for future research are also examined.