Off-Equilibrium Speed Control of a Multistage Molecular Rotor: 2-Fold Chemical Fueling by Acid or Silver(I)

A Photocontrolled Molecular Rotor Based on Azobenzene-Strapped Mixed (Phthalocyaninato)(Porphyrinato) Rare Earth Triple-Decker

Effectively regulating the rotary motions of molecular rotors through external stimuli poses a tremendous challenge. Herein, a new type of molecular rotor based on azobenzene-strapped mixed (phthalocyaninato)(porphyrinato) rare earth triple-decker complex Azo-1 is reported. Electronic absorption and 1H NMR spectra manifested the reversible isomerization of the rotor Azo-1 between the trans configuration and the cis configuration. The rotational behavior of phthalocyanine rotator in two configurations were investigated by VT-1H NMR experiments, and the results indicated that the phthalocyanine rotator possessed a smaller rotational energy barrier in the cis isomer than in the trans isomer, which was also supported by DFT calculations. This result demonstrates that the rotation of phthalocyanine rotator in (phthalocyaninato)(porphyrinato) rare earth triple-decker complex can be successfully modulated by photo-isomerization via altering irradiation.

Kinetic Trapping of an Out-of-Equilibrium Dynamic Library of Imines by Changing Solvent

A well-behaved dynamic library composed of two imines and corresponding amines was subjected to the action of an activated carboxylic acid (ACA), whose decarboxylation is known to be base promoted, in different solvents, namely CD2Cl2, CD3CN, and mixtures of them. Two non-equilibrium systems are consequently obtained: i) a dissipative (CD2Cl2) and ii) an out-of-equilibrium (CD3CN) dynamic library whose composition goes back to equilibrium after a given time. In the former case, the library is fully coupled with the decarboxylation of the ACA, while in the latter, an energy ratchet operates. In the mixed solvents, the library exhibits a mediated behavior. Interestingly, in the presence of an excess of added ACA, the different behavior of the imine library in the two solvents is expected to manifest only when the excess acid is consumed.

Improving Fatigue Resistance and Autonomous Switching of pH Responsive Hydrazones by Pulses of a Chemical Fuel

The chemically triggered reversible switching of pH-responsive hydrazones involves rotary motion-induced configurational changes, serving as a prototype for constructing an array of molecular machines. Typically, the configurational isomerization of such switches into two distinct forms (E/Z) occurs through the alteration of the pH the medium, achieved by successive additions of acid and base stimuli. However, this process results in intermittent operation due to the concomitant accumulation of salt after each cycle, limiting switching performance to only a few cycles (5-6). In this context, we introduce a novel strategy for the autonomous E/Z isomerization of hydrazones in acetonitrile using pulses of trichloroacetic acid as a chemical fuel. The use of this transient acid enabled reversible switching of hydrazones even after 50 cycles without causing significant fatigue. To test the broad viability of the fuel, a series of ortho/para-substituted hydrazones were synthesized and their switching performance was investigated. The analysis of kinetic data showed a strong dependency of switching operations including the lifetime of transient state, on the electronic properties of substituents. Finally, a distinct color change from yellow to orange due to reversible switching of the para-methoxy substituted hydrazone was employed for the creation of rewritable messages on commercially available paper.

Stepwise Dissipative Control of Multimodal Motion in a Silver(I) Catenate

Stepwise dissipative control of two distinct motions, i.e., shuttling and sliding, is demonstrated in a single multicomponent device. When [2]rotaxane 1, which acts as a biped, and deck 2 were treated with AgBF4/PhCH2Br+NEt3 as chemical fuel, the transient catenate [Ag(1)]+ ⋅ [Ag3(2)]3+ was instantly generated showing multimodal motion and autonomous return to 1 and 2. In the dissipative process, catenate [Ag(1)]+ ⋅ [Ag3(2)]3+ cleanly transformed into the follow-up transient device (1) ⋅ [Ag3(2)]3+ exhibiting only sliding motion. Two interference-free dissipative cycles proved the resilience and robustness of the process.

Transient Metallo-Lipidoid Assemblies Amplify Covalent Catalysis of Aqueous and Non-Aqueous Reactions

Dissipative supramolecular assemblies are hallmarks of living systems, contributing to their complex, dynamic structures and emerging functions. Living cells can spatiotemporally control diverse biochemical reactions in membrane compartments and condensates, regulating metabolite levels, signal transduction or remodeling of the cytoskeleton. Herein, we constructed membranous compartments using self-assembly of lipid-like amphiphiles (lipidoid) in aqueous medium. The new double-tailed lipidoid features Cu(II) coordinated with a tetravalent chelator that dictates the binding of two amphiphilic ligands in cis-orientation. Hydrophobic interactions between the lipidoids coupled with intermolecular hydrogen bonding led to a well-defined bilayer vesicle structure. Oil-soluble SNAr reaction is efficiently upregulated in the hydrophobic cavity, acting as a catalytic crucible. The modular system allows easy incorporation of exposed primary amine groups, which augments the catalysis of retro aldol and C-N bond formation reactions. Moreover, a higher-affinity chelator enables consumption of the Cu(II) template leveraging the differential thermodynamic stability, which allows a controllable lifetime of the vesicular assemblies. Concomitant temporal upregulation of the catalytic reactions could be tuned by the metal ion concentration. This work offers new possibilities for metal ion-mediated dynamic supramolecular systems, opening up a massive repertoire of functionally active dynamic "life-like" materials.

Orthogonal Initiation of Molecular Motion Devices by Two Chemical Fuels

Herein, we demonstrate the selective dissipative and orthogonal actuation of two distinct molecular devices controlled by alternate fuel use. When the multicomponent ensemble of [2]rotaxane 1 and turnstile [Cu(2)(3)]+ was charged with AgBF4 as chemical fuel (Fuel 1) together with NEt3/PhCH2Br (cofuels), the transiently formed [Ag(1)]+ showed a stochastic shuttling of the silver macrocycle between two degenerate triazole stations on the thread (k298 = 1.2 × 105 s-1), whereas [Cu(2)(3)]+ was unperturbed. Instead, treatment of the mixture with PPh3 as an alternative fuel (Fuel 2) in the presence of oxidant 4 (cofuel) generated the complex [Cu(3)(PPh3)2]+ and transient thermal motion in rotor 2 (k298 = 4.9 × 104 s-1), whereas rotaxane 1 stayed dormant. Thus, two distinct chemical fuels selectively and orthogonally activated two distinct transient motion devices from a multicomponent mixture. In total, four interference-free dissipative cycles were demonstrated by using alternating fuel additions.

Fast and slow walking driven by chemical fuel

We demonstrate the fast forward and slow backward motion of a biped on a tetrahedral track using chemical fuel, cooperative binding and kinetic selectivity. Walking of the biped is based on its dibenzyl amine feet that bind to zinc porphyrin units and, upon protonation, to dibenzo 24-crown-8 sites affording pseudorotaxane linkages.

Proton transfer network with luminescence display controls OFF/ON catalysis that generates a high-speed slider-on-deck

A three-component network for OFF/ON catalysis was built from a protonated nanoswitch and a luminophore. Its activation by addition of silver(i) triggered the proton-catalyzed formation of a biped and the assembly of a fast slider-on-deck (k 298 = 540 kHz).

Transient self-assembly of metal-organic complexes

Implementing transient processes in networks of dynamic molecules holds great promise for developing new functional behaviours. Here we report that trichloroacetic acid can be used to temporarily rearrange networks of dynamic imine-based metal complexes towards new equilibrium states, forcing them to express complexes otherwise unfavourable in their initial equilibrium states. Basic design principles were determined for the creation of such networks. Where a complex distribution of products was obtained in the initial equilibrium state of the system, the transient rearrangement temporarily yielded a simplified output, forcing a more structured distribution of products. Where a single complex was obtained in the initial equilibrium state of the system, the transient rearrangement temporarily modified the properties of this complex. By doing so, the mechanical properties of an helical macrocyclic complex could be temporarily altered by rearranging it into a [2]catenane.

Shape-Dependent Complementary Ditopic Terpyridine Pair with Two Levels of Self-Recognition for Coordination-Driven Self-Assembly

Molecular recognition in biological systems plays a vital role in the precise construction of biomacromolecules and the corresponding biological activities. Such recognition mainly relies on the highly specific binding of complementary molecular pairs with complementary sizes, shapes, and intermolecular forces. It still remains challenging to develop artificial complementary motif pairs for coordination-driven self-assembly. Herein, a series of shape-dependent complementary motif pairs, based on ditopic 2,2':6',2″-terpyridine (TPY) backbone, are designed and synthesized. The fidelity degrees of self-assemblies from these motifs are carefully evaluated by multi-dimensional mass spectrometry, nuclear magnetic resonance spectroscopy, and molecular modeling. In addition, two levels of self-recognition in both homoleptic and heteroleptic assembly are discovered in the assembled system. Through finely tuning the shape and size of the ligands, a complementary pair is developed with error-free narcissistically self-sorting at two levels of self-recognition, and the intrinsic principle is carefully investigated.

Three-Input Logic AND Gate Drives Sequential Three-Step Catalysis by Parallel Activation of H+ and Ag+ as a Catalyst Duo

Boolean operations with multiple catalysts as output are yet unknown using molecular logic. The issue is solved using a two-component ensemble, composed of a receptor and rotaxane, which acts as a three-input AND gate with a dual catalytic output. Actuation of the ensemble gate by the stoichiometric addition of metal ions (Ag⁺ and Cd²⁺) and 2,2,2-trifluoroacetic acid generated in the (1,1,1) truth table state a catalyst duo that synergistically enabled a three-step reaction, furnishing a dihydroisoquinoline as the output of a three-input logic AND gate operation.

Recent Advances in Fuel-Driven Molecular Switches and Machines

The molecular switches and machines arena has entered a new phase in which molecular machines operate under out-of-equilibrium conditions using appropriate fuel. Unlike the equilibrium version, the dissipative off-equilibrium machines necessitate only one stimulus input to complete each cycle and decrease chemical waste. Such a modus operandi would set significant steps towards mimicking the natural machines and may offer a platform for advancing new applications by providing temporal control. This review summarises the recent progress and blueprint of autonomous fuel-driven off-equilibrium molecular switches and machines.

Following a Silent Metal Ion: A Combined X-ray Absorption and Nuclear Magnetic Resonance Spectroscopic Study of the Zn2+ Cation Dissipative Translocation between Two Different Ligands

The dissipative translocation of the Zn2+ ion between two prototypical coordination complexes has been investigated by combining X-ray absorption and 1H NMR spectroscopy. An integrated experimental and theoretical approach, based on state-of-the-art Multivariate Curve Resolution and DFT based theoretical analyses, is presented as a means to understand the concentration time evolution of all relevant Zn and organic species in the investigated processes, and accurately characterize the solution structures of the key metal coordination complexes. Specifically, we investigate the dissipative translocation of the Zn2+ cation from hexaaza-18-crown-6 to two terpyridine moieties and back again to hexaaza-18-crown-6 using 2-cyano-2-phenylpropanoic acid and its para-chloro derivative as fuels. Our interdisciplinary approach has been proven to be a valuable tool to shed light on reactive systems containing metal ions that are silent to other spectroscopic methods. These combined experimental approaches will enable future applications to chemical and biological systems in a predictive manner.

Dissipative Acid-Fueled Reprogrammable Supramolecular Materials

Smart materials reversibly changing properties in response to a stimuli are promising for a broad array of applications. In this article, we report the use of trichloroacetic acid (TCA) as fuel to create new types of time-controlled materials switching reversibly from a gel to a solution (gel-sol-gel cycle). Applying various neutral amines as organogelators, TCA addition induces amine protonation, switching the system to a solution, while TCA decarboxylation over time enables a return to the initial gel state. Consequently, the newly obtained materials possess interesting time-dependent properties applied in the generation of remoldable objects, as an erasing ink, as chiroptical switches, or for the generation of new types of electrical systems.

A Rotation-Inversion Dual-Motion Molecular Switch: Race for NMR Signaling

The interplay between the thermal helical inversion (THI) of the stiff-stilbene moiety and the rotation of the dimethylamino (DMA) group in 1 results in a dependence of the DMA NMR signals on the THI kinetics in (E)-1 but the rotation kinetics in (Z)-1, because the faster motion mode is responsible. Consequently, the photochemical switching from (E)-1 to (Z)-1 illustrates the phenomenon of "switchable motion detection" by the same set of NMR signals in a dual-motion molecular system.

Dissipative control of the fluorescence of a 1,3-dipyrenyl calix[4]arene in the cone conformation

The temporal control (ON/OFF/ON) of the fluorescence of a dichloromethane/acetonitrile 1 : 1 solution of calixarene 3 decorated with two pyrenyl moieties at the upper rim is attained by the addition of CCl₃CO₂H used as a convenient chemical fuel.

Fuel Acid Drives Base Catalysis and Supramolecular Cage-to-Device Transformation under Dissipative Conditions

In State-I, a mixture comprising a DABCO-bridged tris(zinc-porphyrin) double decker and a free biped (=slider), catalysis was OFF. Acid addition (TFA or Di-Stefano fuel acid) to State-I liberated DABCO-H⁺ while generating a highly dynamic slider-on-deck device (State-II). The released DABCO-H⁺ acted as a base organocatalyst for a Knoevenagel reaction (catalysis ON). The system was reversed to State-I (catalysis OFF) by reducing the acidity in the system (by adding DBU or via the fuel-derived base).

Two Faces of the Same Coin: Coupling X-Ray Absorption and NMR Spectroscopies to Investigate the Exchange Reaction Between Prototypical Cu Coordination Complexes

The satisfactory rationalization of complex reactive pathways in solution chemistry may greatly benefit from the combined use of advanced experimental and theoretical complementary methods of analysis. In this work, we combine X-Ray Absorption and ¹ H NMR spectroscopies with state-of-the-art Multivariate Curve Resolution and theoretical analyses to gain a comprehensive view on a prototypical reaction involving the variation of the oxidation state and local structure environment of a selected metal ion coordinated by organic ligands. Specifically, we investigate the 2-cyano-2-phenylpropanoic acid reduction of the octahedral complex established by the Cu²⁺ ion with terpyridine to the tetrahedral complex formed by Cu⁺ and neocuproine. Through our interdisciplinary approach we gain insights into the nature, concentration time evolution and structures of the key metal (XAS measurements) and organic (¹ H NMR measurements) species under reaction. We believe our method may prove to be useful in the toolbox necessary to understand the mechanisms of reactive processes of interest in solution.