Route to the Smallest Doped Semiconductor: Mn(2+)-Doped (CdSe)13 Clusters

Semiconductor Quantum Dots in the Cluster Regime

The exciton Bohr radius is a defining feature in conventional quantum dot physics. Three distinct confinement regimes are usually recognized: the weak, intermediate, and strong confinement regimes. Which of these is relevant depends on the relative size of the quantum dot in terms of the exciton Bohr radius. However, this classification is primarily based on the linear optical properties of the nanocrystal. During the transition from the molecule to the bulk crystal, structural, mechanical, thermal, and chemical properties change as well. In this review, we discuss the cluster regime, where the exciton experiences extreme confinement. In the cluster regime, not only do linear optical properties deviate significantly from the effective mass approximation, but other material properties also begin to deviate from their bulk values. These deviations are only observable in the size regime, where the intrinsic length scales are much smaller than the exciton Bohr radius. Crucially, computational methods allow chemists to explore this region far more quantitatively than in the past.

Photocatalytic Hydrogen Production Using Semiconductor (CdSe)13 Clusters

Atomically precise (CdSe)13 clusters, the smallest CdSe semiconductors, represent a unique class of materials at the boundary between nanocrystals and molecules. Despite their promising potential, low structural stability limits their applications as photocatalysts. Herein, we report photocatalytic hydrogen production using atomically precise (CdSe)13 clusters. To improve stability in aqueous environments, we induce self-assembly into suprastructures, making them suitable for water splitting. Our findings demonstrate that Co2+ doping enhances the electrical properties of these clusters, while bipyridine serves as cocatalyst by interacting with Co2+ dopants and providing catalytic active sites. Through the synergistic effects of Co2+ doping and bipyridine, Co2+-doped (CdSe)13 suprastructures achieve promising hydrogen evolution activity, surpassing those of undoped suprastructures or nanoclusters. Theoretical calculations confirm that Co2+ doping and bipyridine incorporation lower the hydrogen adsorption energy, consistent with the experimental results. These results highlight the potential of semiconductor (CdSe)13 clusters as photocatalysts for sustainable hydrogen production.

Photo-crosslinking of doped magic-sized nanoclusters for the construction of enhanced electrochemiluminescence biosensors

Semiconductor magic-sized nanoclusters (MSCs) possess atomic-level compositional precision and ultrasmall dimensions, allowing accurate modulation of electrochemiluminescence (ECL) properties, essential for advanced bioanalytical applications. However, low intrinsic ECL intensity and poor stability in bipolar electrode (BPE)-ECL systems hinder their broader use. In this work, we addressed these limitations through doping and direct optical crosslinking strategies, achieving a 24-fold boost in the ECL signal and a fivefold stability increase for doped (CdS)34:Ag MSCs compared with original (CdS)34 MSCs. The resulting BPE-ECL biosensing platform was used for the sensitive detection of glucose with a linear detection range of 10 μM to 1 mM and a detection limit of 3.64 μM. This approach provides a robust strategy to enhance MSC-based ECL biosensing, paving the way for ultrasensitive, stable biosensors for clinical diagnostics and bioanalysis.

Unexpected Magnetic Moments in Manganese-Doped (CdSe)13 Nanoclusters: Role of Ligands

This study explores the enhancement in magnetic and photoluminescence properties of Mn2+-doped (CdSe)13 nanoclusters, significantly influenced by the introduction of paramagnetic centers through doping, facilitated by optimized precursor chemistry and precisely controlled surface ligand interactions. Using a cost-effective and scalable synthesis approach with elemental Se and NaBH4 (Se-NaBH4) in n-octylamine, we tailored bonding configurations (Cd-O, Cd-N, and Cd-Se) on the surface of nanoclusters, as confirmed by EXAFS analysis. These bonding configurations allowed for tunable Mn2+-doping with tetrahedral coordination, further stabilized by hydrogen-bonded acetate ligands, as evidenced by 13C NMR and IR spectroscopy. Mulliken charge analysis indicates that the charge redistribution on Se2- suggests electron transfer between surface ligands and the nanocluster, contributing to spin fluctuations. These tailored configurations markedly increased the nanoclusters' magnetic susceptibility and photoluminescence efficiency. The resulting nanoclusters demonstrated a clear concentration-dependent response in emission lifetimes and intensities upon exposure to magnetic field effects (MFE) and spin-spin coupling, alongside a large magnetic moment exceeding 40 μB at 180 K. These findings highlight the potential of these nanoclusters for magneto-optical devices and spintronic applications, showcasing their tunable magnetic properties and exciton dynamics.

Lanthanide-Based Molecular Magnetic Semiconductors

Magnetic semiconductors, with integrated properties of ferromagnets and semiconductors, are significant for developing next-generation spintronic devices. Herein two atomically precise clusters of dysprosium(III) tellurides, formulated respectively as [Na2(15-crown-5)3(py)2][(η5-Cp*Dy)5(Te)6](py)4 (Dy5Te6, Cp*=pentamethylcyclopentadienyl; py=pyridine) and [K(2,2,2-cryptand)]2[(η5-Cp*Dy)6(Te3)(Te2)2(Te)3] (Dy6Te10), are reported. Crystallographic studies revealed the presence of multifarious tellurido ligands within the polyhedral cluster cores. Spectroscopic and magnetic studies showed that both clusters are single-molecule magnets exhibiting slow magnetic relaxation behaviors at low temperatures and semiconductors with low optical band gaps comparable to benchmark semiconductors. These clusters represent probably the first lanthanide-based molecular magnetic semiconductors.

Ion exchange in semiconductor magic-size clusters

As a crucial post-synthesis method, ion exchange allows for precise control over the composition, interface, and morphology of nanocrystals at the atomic scale, achieving material properties that are difficult to obtain with traditional synthesis techniques. In nanomaterial science, semiconductor magic-size clusters (MSCs), with their atomic-level precision and unique quantum confinement effects, serve as a bridge between molecules and nanocrystals. Despite this, research on ion exchange in MSCs is still in its infancy. This review introduces the principles of ion exchange and reactions in colloidal nanocrystals and MSCs, analyzing the importance and challenges of ion exchange in studying MSCs. This paper begins with a focus on the current research progress of cation and anion exchange in II-VI and III-V semiconductor MSCs. Then, the common methods for characterizing MSCs during the ion exchange process are discussed. Finally, the article envisions future research directions based on MSCs' ion exchange. Research on MSCs' ion exchange not only aids in designing MSCs with complex functionalities, but also plays an essential role in elucidating the ion exchange mechanisms in nanocrystals, providing new insights for the innovative design and synthesis of nanomaterials.

Silver-doped CdSe magic-sized nanocrystals

Magic-sized nanocrystals (MSNCs) grow via jumps between very specific sizes. This discrete growth is a possible avenue toward monodisperse nanomaterials that are completely identical in size and shape. In spite of this potential, MSNCs have seen limited study and application due to their poor optical properties. Specifically, MSNCs are limited in their range of emission wavelengths and commonly exhibit poor photoluminescence quantum yields (PLQYs). Here, we report silver doping of CdSe MSNCs as a strategy to improve the optical properties of MSNCs. Silver doping leads to controllable shifts in emission wavelength and significant increases in MSNC PLQYs. These results suggest that doped MSNCs are interesting candidates for displays or luminescent solar concentrators. Finally, we demonstrate that the doping process does not affect the magic size of our MSNCs, allowing further photophysical study of this class of nanomaterial.

Synthesis and Single Crystal X-ray Diffraction Structure of an Indium Arsenide Nanocluster

The discovery of magic-sized clusters as intermediates in the synthesis of colloidal quantum dots has allowed for insight into formation pathways and provided atomically precise molecular platforms for studying the structure and surface chemistry of those materials. The synthesis of monodisperse InAs quantum dots has been developed through the use of indium carboxylate and As(SiMe3)3 as precursors and documented to proceed through the formation of magic-sized intermediates. Herein, we report the synthesis, isolation, and single-crystal X-ray diffraction structure of an InAs nanocluster that is ubiquitous across reports of InAs quantum dot synthesis. The structure, In26As18(O2CR)24(PR'3)3, differs substantially from previously reported semiconductor nanocluster structures even within the III-V family. However, it can be structurally linked to III-V and II-VI cluster structures through the anion sublattice. Further analysis using variable temperature absorbance spectroscopy and support from computation deepen our understanding of the reported structure and InAs nanomaterials as a whole.

Revealing Two Distinct Formation Pathways of 2D Wurtzite-CdSe Nanocrystals Using In Situ X-Ray Scattering

Understanding the mechanism underlying the formation of quantum-sized semiconductor nanocrystals is crucial for controlling their synthesis for a wide array of applications. However, most studies of 2D CdSe nanocrystals have relied predominantly on ex situ analyses, obscuring key intermediate stages and raising fundamental questions regarding their lateral shapes. Herein, the formation pathways of two distinct quantum-sized 2D wurtzite-CdSe nanocrystals - nanoribbons and nanosheets - by employing a comprehensive approach, combining in situ small-angle X-ray scattering techniques with various ex situ characterization methods is studied. Although both nanostructures share the same thickness of ≈1.4 nm, they display contrasting lateral dimensions. The findings reveal the pivotal role of Se precursor reactivity in determining two distinct synthesis pathways. Specifically, highly reactive precursors promote the formation of the nanocluster-lamellar assemblies, leading to the synthesis of 2D nanoribbons with elongated shapes. In contrast, mild precursors produce nanosheets from a tiny seed of 2D nuclei, and the lateral growth is regulated by chloride ions, rather than relying on nanocluster-lamellar assemblies or Cd(halide)2 -alkylamine templates, resulting in 2D nanocrystals with relatively shorter lengths. These findings significantly advance the understanding of the growth mechanism governing quantum-sized 2D semiconductor nanocrystals and offer valuable guidelines for their rational synthesis.

CdTe magic-size cluster synthesis via a cation exchange method and conversion mechanism

The quasi-metallic nature of Te is not conducive to telluride formation and crystallization, which makes the synthesis of CdTe magic-size clusters (MSCs) in a single-ensemble form still challenging. CdTe MSCs are usually synthesized by direct synthesis, a method that must avoid the formation of quantum dots by selecting suitable active precursors and precisely controlling the reaction temperature. In addition, the organic Cd compounds and superhydrogenated precursors used are air-sensitive. Herein, CdTe MSC-448 in a single-ensemble form was synthesized for the first time via a cation exchange method using ZnTe MSC-389 as a template and Cd2+ as an exchange ion. In situ absorption spectroscopy characterization combined with the two-pathway model proposed by Yu's group reveals that the conversion of ZnTe MSC-389 into CdTe MSC-448 is assisted by their corresponding precursor compounds (PCs). After the addition of Cd precursors to ZnTe MSC-389 solution, ZnTe MSC-389 is transformed into ZnTe PC-389, which then undergoes a rapid cation exchange reaction with Cd2+ to yield CdTe PC-448, and CdTe PC-448 is finally converted into CdTe MSC-448. CdTe MSCs in single-ensemble form were obtained by cation exchange in air at room temperature, avoiding the formation of quantum dots (QDs) at high temperatures in the direct synthesis method conducted without the use of toxic and expensive active precursors, which provides a new route to the synthesis of CdTe MSCs.

From Helices to Crystals: Multiscale Representation of Chirality in Double-Helix Structures

Single crystals with chiral shapes aroused the interest of chemists due to their fascinating polarization rotation properties. Although the formation of large-scale spiral structures is considered to be a potential factor in chiral crystals, the precise mechanism behind their formation remains elusive. Herein, we present a rare phenomenon involving the multitransfer and expression of chirality at micro-, meso-, and macroscopic levels, starting from chiral carbon atoms and extending to the double-helical secondary structure, ultimately resulting in the chiral geometry of crystals. The assembly of the chiral double helices is facilitated by the dual characteristics of amide groups derived from amino acids, which serve as both hydrogen bond donors and receptors, similar to the assembly pattern observed in DNA. Crystal face analysis and theoretical morphology reveal two critical factors for the mechanism of the chiral crystal: inherent intrinsically symmetrical distribution of crystal faces and their acquired growth. Importantly, the magnetic circular dichroism (MCD) study reveals the strong magneto-optical response of the hypersensitive f-f transition in the UV-vis-NIR region, which is much stronger than previously observed signals. Remarkably, an external magnetic field can reverse the CD signal. This research highlights the potential of lanthanide-based chiral helical structures as promising magneto-optical materials.

Phase Engineering of 2D Spinel-Type Manganese Oxides

2D magnetic materials have been of interest due to their unique long-range magnetic ordering in the low-dimensional regime and potential applications in spintronics. Currently, most studies are focused on strippable van der Waals magnetic materials with layered structures, which typically suffer from a poor stability and scarce species. Spinel oxides have a good environmental stability and rich magnetic properties. However, the isotropic bonding and close-packed nonlayered crystal structure make their 2D growth challenging, let alone the phase engineering. Herein, a phase-controllable synthesis of 2D single-crystalline spinel-type oxides is reported. Using the van der Waals epitaxy strategy, the thicknesses of the obtained tetragonal and hexagonal manganese oxide (Mn3 O4 ) nanosheets can be tuned down to 7.1 nm and one unit cell (0.7 nm), respectively. The magnetic properties of these two phases are evaluated using vibrating-sample magnetometry and first-principle calculations. Both structures exhibit a Curie temperature of 48 K. Owing to its ultrathin geometry, the Mn3 O4 nanosheet exhibits a superior ultraviolet detection performance with an ultralow noise power density of 0.126 pA Hz-1/2 . This study broadens the range of 2D magnetic semiconductors and highlights their potential applications in future information devices.

An Organic Chiroptical Detector Favoring Circularly Polarized Light Detection from Near-Infrared to Ultraviolet and Magnetic-Field-Amplifying Dissymmetry in Detectivity

Circularly polarized light detection has attracted growing attention because of its unique application in security surveillance and quantum optics. Here, through designing a chiral polymer as a donor, a high-performance circularly polarized light detector is fabricated, successfully enabling detection from ultraviolet (300 nm) to near-infrared (1100 nm). The chiroptical detector presents an excellent ability to distinguish right-handed and left-handed circularly polarized light, where dissymmetries in detectivity, responsivity, and electric current are obtained and then optimized. The dissymmetry in electric current can be increased from 0.18 to 0.23 once an external magnetic field is applied. This is a very rare report on the dissymmetry tunability by an external field in chiroptical detectors. Moreover, the chirality-generated orbital angular momentum is one of the key factors determining the performance of the circularly polarized light detection. Overall, the organic chiroptical detector presents excellent stability in detection, which provides great potential for future flexible and compact integrated platforms.

Synthesis, Assembly, and Applications of Magic-Sized Semiconductor (CdSe)13 Cluster

ConspectusAtomically precise metal chalcogenide clusters (MCCs) are model molecular compounds of scientifically and technologically important semiconductor nanocrystals, which are known as quantum dots (QDs). The significantly high ambient stability of MCCs of particular sizes, as compared to that of slightly smaller or larger sizes, made them be termed "magic-sized clusters" (MSCs). In other words, MSCs with specific sizes between sizes of precursors (typically, metal-ligand complexes) and nanocrystals (typically, QDs) appear sequentially during the colloidal synthesis of nanocrystals, while the other cluster species decompose to precursor monomers or are consumed during the growth of the nanocrystals. Unlike nanocrystals with an ambiguous atomic-level structure and a substantial size distribution, MSCs possess atomically monodisperse size, composition, and distinct atomic arrangement. Chemical synthesis and exploration of properties of MSCs are of great significance since they help systematically understand the evolution of fundamental properties as well as build structure-activity relationships at distinct molecular levels. Furthermore, MSCs are anticipated to offer atomic-level insights into the growth mechanism of the semiconductor nanocrystals, which is highly desirable in the design of advanced materials with new functions. In this Account, we cover our recent efforts in the advancement of one of the most important stoichiometric CdSe MSCs, (CdSe)₁₃. In particular, we present its molecular structure derived from a single crystal X-ray crystallographic study of the closest MSC, Cd₁₄Se₁₃. The crystal structure of MSC enables not only the understanding of the electronic structure and prediction of the potential sites for heteroatom dopants (e.g., Mn²⁺ and Co²⁺) but also the identification of favorable synthetic conditions for the selective synthesis of desired MSCs. Next, we focus on enhancing the photoluminescence quantum yield and stability of Mn²⁺ doped (CdSe)₁₃ MSCs through their self-assembly, which is facilitated by the rigid diamines. In addition, we show how atomic-level synergistic effects and functional groups of the assemblies of alloy MSCs can be utilized for a highly enhanced catalytic CO₂ fixation with epoxides. Benefiting from the intermediate stability, the MSCs are explored as single-source precursors to low-dimensional nanostructures, such as nanoribbons and nanoplatelets, through the controlled transformation. Distinct differences in the outcome of the solid-state and colloidal-state conversion of MSCs suggest the need for careful consideration of the phase and reactivity of MSCs as well as the type of dopant to achieve novel structured multicomponent semiconductors. Finally, we summarize the Account and provide future perspectives on the fundamental and applied scientific research of MSCs.

Circularly Polarized Photoluminescence of Chiral 2D Halide Perovskites at Room Temperature

Chiral halide perovskites have attracted considerable attention because of their chiroptical, second-harmonic generation, and ferroelectricity properties and their potential application in chiroptoelectronics and chiral spintronics. However, the fundamental research of these properties is insufficient. In this work, chiral perovskites were synthesized using precursor solutions with various stoichiometric ratios ⟨n⟩. The chiral perovskite film prepared from the solution with ⟨n⟩ = 1 is composed of (R-/S-/rac-MBA)₂PbBr₄, whereas the films prepared from the solutions with ⟨n⟩ larger than 1 are a mixture of (R-/S-/rac-MBA)₂(CsMA)_n-1Pb_nBr_3n+1 with n = 1 and large n values. A photoluminescence quantum yield of approximately 90 was obtained. Symmetric circular dichroism (CD) spectra were observed without an external magnetic field. Under various magnetic fields, magnetic field-induced CD features are superimposed with the intrinsic chirality-induced CD features. For the ⟨n⟩ = 1 chiral perovskite film, the energy level splitting induced by chiral molecules are a few 10 μeV, whereas the energy level splitting induced by magnetic fields are at the range of ∼-250 to ∼250 μeV. Circularly polarized photoluminescence spectra were observed at room temperature and associated with the spin-preserved energy funneling from highly energetic phases to the lower energetic phases.

Designing inorganically functionalized magic-size II-VI clusters and unraveling their surface states

Surface engineering is a critical step in the functionalization of nanomaterials to improve their optical and electrochemical properties. However, this process remains a challenge in II-VI magic-size clusters (MSCs) due to their high sensitivity to the environment. Herein, we developed a general surface modification strategy to design all-inorganic MSCs by using certain metal salts (cation = Zn2+, In3+; Anion = Cl-, NO3 -, OTf-) and stabilized (CdS)34, (CdSe)34 and (ZnSe)34 MSCs in polar solvents. We further investigated the surface states of II-VI MSCs using electrochemiluminescence (ECL). The mechanism study revealed that the ECL emission was attributed to . Two ECL emissions at 556 nm and 530 nm demonstrated two surface passivation modes on (CdS)34 MSCs, which can be tuned by the surface ligands. The achievement of surface engineering opens a new design space for functional MSC compounds.

Effects of Mono- and Bifunctional Surface Ligands of Cu-In-Se Quantum Dots on Photoelectrochemical Hydrogen Production

Semiconductor nanocrystal quantum dots (QDs) are promising materials for solar energy conversion because of their bandgap tunability, high absorption coefficient, and improved hot-carrier generation. CuInSe2 (CISe)-based QDs have attracted attention because of their low toxicity and wide light-absorption range, spanning visible to near-infrared light. In this work, we study the effects of the surface ligands of colloidal CISe QDs on the photoelectrochemical characteristics of QD-photoanodes. Colloidal CISe QDs with mono- and bifunctional surface ligands are prepared and used in the fabrication of type-II heterojunction photoanodes by adsorbing QDs on mesoporous TiO2. QDs with monofunctional ligands are directly attached on TiO2 through partial ligand detachment, which is beneficial for electron transfer between QDs and TiO2. In contrast, bifunctional ligands bridge QDs and TiO2, increasing the amount of QD adsorption. Finally, photoanodes fabricated with oleylamine-passivated QDs show a current density of ~8.2 mA/cm2, while those fabricated with mercaptopropionic-acid-passivated QDs demonstrate a current density of ~6.7 mA/cm2 (at 0.6 VRHE under one sun illumination). Our study provides important information for the preparation of QD photoelectrodes for efficient photoelectrochemical hydrogen generation.

Room-temperature formation of alloy ZnxCd13-xSe13 magic-size clusters via cation exchange in diamine solution

Magic-size clusters (MSCs) are molecular materials with unique properties at the border between molecules and solids, providing important insights into the nanocrystal formation process. However, the synthesis of multicomponent alloy MSCs in a single-ensemble form remains challenging due to their tiny size and difficult doping control. Herein, for the first time, we successfully synthesized alloy Zn_xCd_13-xSe₁₃ MSCs (x = 1-12) with a unique sharp absorption peak at 352 nm by cation exchange between Cd²⁺ ions and pre-synthesized (ZnSe)₁₃ MSCs in a diamine solution at room temperature. The experimental results show that the use of diamines is crucial to the formation of stable Zn_xCd_13-xSe₁₃ MSCs, which may be attributed to two amine groups that can coordinate to the surface of MSCs simultaneously. Limited by the robust interaction between diamine ligands and MSCs, the partial cation exchange results in the formation of alloy Zn_xCd_13-xSe₁₃ MSCs. In contrast, complete cation exchange occurs in a monoamine solution, giving (CdSe)₃₄ MSCs. Besides, a lower reaction temperature and a higher concentration of diamine favor the formation of Zn_xCd_13-xSe₁₃ MSCs. Our study provides an important basis for further understanding of the transformation of MSCs and a new approach to the controllable synthesis of alloyed MSCs.

Role of Magnetic Coupling in Photoluminescence Kinetics of Mn2+-Doped ZnS Nanoplatelets

Mn²⁺-doped semiconductor nanocrystals with tuned location and concentration of Mn²⁺ ions can yield diverse coupling regimes, which can highly influence their optical properties such as emission wavelength and photoluminescence (PL) lifetime. However, investigation on the relationship between the Mn²⁺ concentration and the optical properties is still challenging because of the complex interactions of Mn²⁺ ions and the host and between the Mn²⁺ ions. Here, atomically flat ZnS nanoplatelets (NPLs) with uniform thickness were chosen as matrixes for Mn²⁺ doping. Using time-resolved (TR) PL spectroscopy and density functional theory (DFT) calculations, a connection between coupling and PL kinetics of Mn²⁺ ions was established. Moreover, it is found that the Mn²⁺ ions residing on the surface of a nanostructure produce emissive states and interfere with the change of properties by Mn²⁺-Mn²⁺ coupling. In a configuration with suppressed surface contribution to the optical response, we show the underlying physical reasons for double and triple exponential decay by DFT methods. We believe that the presented doping strategy and simulation methodology of the Mn²⁺-doped ZnS (ZnS:Mn) system is a universal platform to study dopant location- and concentration-dependent properties also in other semiconductors.

Tunable Polarized Microcavity Characterized by Magnetic Circular Dichroism Spectrum

Tunable resonator is a powerful building block in fields like color filtering and optical sensing. The control of its polarization characteristics can significantly expand the applications. Nevertheless, the methods for resonator dynamic tuning are limited. Here, a magnetically regulated circular polarized resonant microcavity is demonstrated with an ultrathin ferrimagnetic composite metal layer Ta/CoTb. We successfully tuned the cavity resonant frequency and polarization performance. A huge magnetic circular dichroism (MCD) signal (∼3.41%) is observed, and the microcavity valley position shifts 5.41 nm when a small magnetic field is applied. This resonant cavity has two-stable states at 0 T due to the magnetic remanence of CoTb film and can be switched using a tiny magnetic field (∼0.01 T). Our result shows that the ferrimagnetic film-based tunable microcavity can be a highly promising candidate for on-chip magneto-optical (MO) devices.

Hydrothermal synthesis of water-soluble Mn- and Cu-doped CdSe quantum dots with multi-shell structures and their photoluminescence properties

Optical properties of semiconductor quantum dots (QDs) can be tuned by doping with transition metal ions. In this study, water-soluble CdSe/ZnS:Mn/ZnS QDs with the core/shell/shell structure were synthesized through a hydrothermal method, in which the surface of the CdSe core was coated with a ZnS:Mn shell and ZnS capping shell. Herein, the CdSe core QDs were prepared first and then doped with Mn2+; therefore, the QD size and doping level could be controlled independently and interference from the self-purifying effect could be avoided. When CdSe cores with diameters less than 1.9 nm were used, Mn-related photoluminescence (PL) was observed as the main PL band, whereas the band-edge PL was mainly observed when larger CdSe cores were used. Furthermore, using ZnS:Cu as the doping shell layer, CdSe/ZnS:Cu/ZnS and ZnSe/ZnS:Cu/ZnS nanoparticles were successfully synthesized, and Cu-related PL was clearly observed. These results indicate that the core/shell/shell QD structure with doping in the shell layer is a versatile method for synthesizing doped QDs.

Recent Advances and Prospects in Colloidal Nanomaterials

Colloidal nanomaterials of metals, metal oxides, and metal chalcogenides have attracted great attention in the past decade owing to their potential applications in optoelectronics, catalysis, and energy conversion. Introduction of various synthetic routes has resulted in diverse colloidal nanostructured materials with well-controlled size, shape, and composition, enabling the systematic study of their intriguing physicochemical, optoelectronic, and chemical properties. Furthermore, developments in the instrumentation have offered valuable insights into the nucleation and growth mechanism of these nanomaterials, which are crucial in designing prospective materials with desired properties. In this perspective, recent advances in the colloidal synthesis and mechanism studies of nanomaterials of metal chalcogenides, metals, and metal oxides are discussed. In addition, challenges in the characterization and future direction of the colloidal nanomaterials are provided.

Magic-Sized Stoichiometric II-VI Nanoclusters

Metal chalcogenide nanomaterials have gained widespread interest in the past two decades for their potential optoelectronic, energy, and catalytic applications. The colloidal growth of various forms of these materials, such as nanowires, platelets, and lamellar assemblies, proceeds through certain thermodynamically stable, ultrasmall (<2 nm) intermediates called magic-sized nanoclusters (MSCs). Due to quantum confinement and its resultant intriguing properties, isolation or direct synthesis of MSCs and their structure characterization, which is very much challenging, are current topics of fundamental and applied scientific research. By comprehensive understanding of the structure-activity relationships in MSCs, the nucleation and growth processes can be manipulated, resulting in the synthesis of novel metal chalcogenide materials for various applications. This review focuses on recent advances in the chemical synthesis, characterization, and theoretical calculations of CdSe and its related II-VI nanoclusters. It highlights the studies of photophysical and magneto-optical properties as well as heteroatom doping of MSCs followed by their chemical transformation to high-dimensional nanostructures. At the end of the review, future directions and possible ways to overcome the challenges in the research of semiconductor MSCs are also presented.

Highly luminescent and catalytically active suprastructures of magic-sized semiconductor nanoclusters

Metal chalcogenide magic-sized nanoclusters have shown intriguing photophysical and chemical properties, yet ambient instability has hampered their extensive applications. Here we explore the periodic assembly of these nanoscale building blocks through organic linkers to overcome such limitations and further boost their properties. We designed a diamine-based heat-up self-assembly process to assemble Mn²⁺:(CdSe)₁₃ and Mn²⁺:(ZnSe)₁₃ magic-sized nanoclusters into three- and two-dimensional suprastructures, respectively, obtaining enhanced stability and solid-state photoluminescence quantum yields (from <1% for monoamine-based systems to ~72% for diamine-based suprastructures). We also exploited the atomic-level miscibility of Cd and Zn to synthesize Mn²⁺:(Cd_1-xZn_xSe)₁₃ alloy suprastructures with tunable metal synergy: Mn²⁺:(Cd_0.5Zn_0.5Se)₁₃ suprastructures demonstrated high catalytic activity (turnover number, 17,964 per cluster in 6 h; turnover frequency, 2,994 per cluster per hour) for converting CO₂ to organic cyclic carbonates under mild reaction conditions. The enhanced stability, photoluminescence and catalytic activity through combined cluster-assembly and metal synergy advance the usability of inorganic semiconductor nanoclusters.

Effect of Mn doping on the electron injection in CdSe/TiO2 quantum dot sensitized solar cells

Promotion in power conversion efficiency is an appealing task for quantum dot-sensitized solar cells that have emerged as promising materials for the utilization of clean and sustainable energy. Doping of Mn atoms into quantum dots (QD) has been proven to be one of the effective approaches, although the origin of such a promotion remains controversial. While several procedures are involved in the power conversion process, electron injection from the QD to the semiconductor oxide substrate is focused on in this work using first-principles calculations. Based on the Marcus theory, the electron injection rates are evaluated for the quantum dot-sensitized solar cell models in which the pure and Mn-doped core-shell CdSe clusters are deposited on a semiconductor titanium dioxide substrate. Enhanced rates are obtained for the Mn-doped structure, which is in qualitative agreement with the experiments. A large number of dominant injection channels and strong QD-substrate coupling are responsible for the Mn-induced rate enhancement, which could be achieved by manipulating the band structure mapping between the QD and the semiconductor oxide. By addressing the role of an Mn dopant in the electron injection process, strategies for the promotion of electron injection rates are proposed for the design of quantum dot-sensitized solar cells.

Giant Zeeman Splitting for Monolayer Nanosheets at Room Temperature

Giant Zeeman splitting and zero-field splitting (ZFS) are observed in 2D nanosheets that have monolayers of atomic thickness. In this study, single-crystalline CdSe(ethylenediamine)_0.5 and Mn²⁺-doped nanosheets are synthesized via a solvothermal process. Tunable amounts of Mn²⁺(0.5-8.0%) are introduced, resulting in lattice contraction as well as phosphorescence from five unpaired electrons. The exciton dynamics are dominated by spin-related electronic transitions (⁴T₁ → ⁶A₁) with long lifetimes (20.5, 132, and 295 μs). Temperature-varied EPR spectroscopy with spectral simulation reveals large ZFS (D = 3850 MHz) due to axial distortion of substituted Mn²⁺ (S = 5/2). In the magnetic circular dichroism (MCD) measurements, we observed giant Zeeman splitting with large effective g values (up to 231 ± 21), which implies huge sp-d exchange interactions in 2D monolayer regimes, leading to diluted magnetic semiconductor (DMS) materials.

Excitonic enhancement of colour emission and Förster resonance energy transfer in chemically synthesized Mn-doped ZnS nanomaterials

This study has been carried out to understand the mechanism of charge carrier dynamics and the existence of exciton-dopant energy transfer within Mn-doped ZnS nanomaterials. Improvement in the energy transfer efficiency and electroluminescence properties of these nanomaterials has been investigated for using them as an emissive layer of LEDs. A chemical co-precipitation method has been used to synthesize ZnS with varying Mn contents to achieve enhanced luminescence properties demonstrating the effect of Mn doping on excitonic luminescence intensity. X-ray powder diffraction analysis reveals the prepared materials to be cubic crystallites with size varying between 2 nm and 4 nm. Agglomerated clusters and a nanogranular morphology have been observed in SEM analysis. The UV-Vis spectra reveal that the band gaps slightly decrease with an increase in the Mn content in ZnS samples. The photoluminescence spectra show that upon Mn incorporation, the intensity of blue emission at 420 nm increases due to the surface states in ZnS; an orange emission at 588 nm is also observed due to a transition within Mn2+. The energy transfer efficiency of 3 to 6% was measured theoretically by using the FRET (Förster resonance energy transfer) model. Mn-doped ZnS shows high photoluminescence quantum yield (QY) in comparison with ZnS, where 0.04 mol% Mn-doped ZnS achieved the highest QY of about 28.94%. The CIE chromaticity coordinates accordingly shift toward white from the blue region upon Mn substitution. A kinetic model has been used to determine the energy transfer efficiency, which affects the luminescence properties of ZnS. The FRET model has suitably unraveled the Förster radius and interatomic distance, which make the energy transfer possible in these materials. We have found 0.04 mol% Mn-doped ZnS with an enhanced energy transfer efficiency. The maximum external quantum efficiency of about 0.643% can be achieved at 2.9 volts of operating voltage for this nanomaterial. These highly luminescent materials possess the characteristics of an emissive layer to be used for light-emitting applications.

Exploiting Functional Impurities for Fast and Efficient Incorporation of Manganese into Quantum Dots

The incorporation of manganese (Mn) ions into Cd(Zn)-chalcogenide QDs activates strong spin-exchange interactions between the magnetic ions and intrinsic QD excitons that have been exploited for color conversion, sunlight harvesting, electron photoemission, and advanced imaging and sensing. The ability to take full advantage of novel functionalities enabled by Mn dopants requires accurate control of doping levels over a wide range of Mn contents. This, however, still represents a considerable challenge. Specific problems include the difficulty in obtaining high Mn contents, considerable broadening of QD size dispersion during the doping procedure, and large batch-to-batch variations in the amount of incorporated Mn. Here, we show that these problems originate from the presence of unreacted cadmium (Cd) complexes whose abundance is linked to uncontrolled impurities participating in the QD synthesis. After identifying these impurities as secondary phosphines, we modify the synthesis by introducing controlled amounts of "functional" secondary phosphine species. This allows us to realize a regime of nearly ideal QD doping when incorporation of magnetic ions occurs solely via addition of Mn-Se units without uncontrolled deposition of Cd-Se species. Using this method, we achieve very high per-dot Mn contents (>30% of all cations) and thereby realize exceptionally strong exciton-Mn exchange coupling with g-factors of ∼600.

Magnetic Circular Dichroism in Nanomaterials: New Opportunity in Understanding and Modulation of Excitonic and Plasmonic Resonances

The unique capability of magnetic circular dichroism (MCD) in revealing geometry and electronic information has provided new opportunities in exploring the relationship between structure and magneto-optical properties in nanomaterials with extraordinary optical absorption. Here, the representative studies referring to application of the MCD technique in semiconductor and noble metal nanomaterials are overviewed. MCD is powerful in elucidating the structural information of the excitonic transition in semiconductor nanocrystals, electronic transitions in noble metal nanoclusters, and plasmon resonance in noble metal nanostructures. By virtue of these advantages, the MCD technique shows its unrivalled ability in evaluating the magnetic modulation of excitonic and plasmonic optical activity of nanomaterials with varied chemical composition, geometry, assembly conformation, and coupling effect. Knowledge of the key factors in manipulating magneto-optical properties at the nanoscale acquired with the MCD technique will largely boost the application of semiconductor and noble nanomaterials in the fields of sensing, spintronic, nanophotonics, etc.

Exciton-driven change of phonon modes causes strong temperature dependent bandgap shift in nanoclusters

The fundamental bandgap Eg of a semiconductor-often determined by means of optical spectroscopy-represents its characteristic fingerprint and changes distinctively with temperature. Here, we demonstrate that in magic sized II-VI clusters containing only 26 atoms, a pronounced weakening of the bonds occurs upon optical excitation, which results in a strong exciton-driven shift of the phonon spectrum. As a consequence, a drastic increase of dEg/dT (up to a factor of 2) with respect to bulk material or nanocrystals of typical size is found. We are able to describe our experimental data with excellent quantitative agreement from first principles deriving the bandgap shift with temperature as the vibrational entropy contribution to the free energy difference between the ground and optically excited states. Our work demonstrates how in small nanoparticles, photons as the probe medium affect the bandgap-a fundamental semiconductor property.

Induced Ferromagnetic Order of Graphdiyne Semiconductors by Introducing a Heteroatom

To date, the realization of ferromagnetism in two-dimensional carbon semiconductors containing only sp electrons has remained a challenge for spintronics. Here, we utilize the atomic-level functionalization strategy to obtain three carbon matrix materials by accurately introducing different light elements (H, F, Cl) into graphdiyne's benzene ring. Their magnetic and conductive characteristics are thoroughly clarified via physical property measurements and DFT calculations. All of these carbon matrix materials retain their excellent intrinsic semiconductor properties. In particular, compared with the paramagnetism of HsGDY and ClsGDY, a robust ferromagnetic ordering as well as high mobility of up to 320 cm² V^-1 s^-1 was observed in FsGDY, successfully realizing a ferromagnetic semiconductor. Through theory calculations, this unique ferromagnetic coupling can be attributed to the most striking charge transfer between carbon and fluorine atoms, demonstrating the advantages of controllable fabrication. These results not only reveal the important role of atomic-scale doping/substitution in optimizing graphdiyne material but also create new possibilities for manipulating spins and charges in 2D carbon materials.

Dual-emission fluorescent silicon nanoparticle-based nanothermometer for ratiometric detection of intracellular temperature in living cells

In this article, we present a kind of dual-emission fluorescent nanothermometer, which is made of europium (Eu3+)-doped silicon nanoparticles (Eu@SiNPs), allowing the detection of intracellular temperature in living cells with high accuracy. In particular, the presented SiNP-based thermometer features dual-emission fluorescence (blue (455 nm) and red (620 nm) emission), negligible toxicity (cell viability of treated cells remains above 90% during 24 h of treatment) and robust photostability in living cells (i.e., preserving >90% of fluorescence intensity after 45 min of continuous UV irradiation). More significantly, the fluorescence intensity of the Eu@SiNPs exhibits a linear ratiometric temperature response in a broad range from 25 to 70 °C. Taking advantage of these attractive merits, the Eu@SiNP-based nanothermometer is able to accurately (∼4.5% change per °C) determine dynamic changes in intracellular temperature in a quantitative and long-term (i.e., 30 min) manner.

Directed Exciton Magnetic Polaron Formation in a Single Colloidal Mn2+:CdSe/CdS Quantum Dot

One of the most prominent signatures of transition-metal doping in colloidal nanocrystals is the formation of charge carrier-induced magnetization of the dopant spin sublattice, called exciton magnetic polaron (EMP). Understanding the direction of EMP formation, however, is still a major obstacle. Here, we present a series of temperature-dependent photoluminescence studies on single colloidal Mn²⁺:CdSe/CdS core/shell quantum dots (QDs) performed in a vector magnetic field providing a unique insight into the interaction between individual excitons and numerous magnetic impurities. The energy of the QD emission and its full width at half-maximum are controlled by the interplay of EMP formation and statistical magnetic fluctuations, in excellent agreement with theory. Most important, we give the first direct demonstration that anisotropy effects-hypothesized for more than a decade-dominate the direction of EMP formation. Our findings reveal a pathway for directing the orientation of optically induced magnetization in colloidal nanocrystals.

The Future of Colloidal Semiconductor Magic-Size Clusters

Atomically defined, zero-dimensional magic-size clusters play pivotal roles in the nucleation and growth of semiconductor nanocrystals. Thus, they provide new opportunities to understand and to control nucleation and growth reactions beyond classical nucleation theory and to employ these reactions in the colloidal synthesis of increasingly complex and anisotropic nanomaterials with atomic level monodispersity. Both challenges require reliable determination of the exact structure and size of these ultrasmall and metastable nanoclusters. In this Perspective, we review and discuss the current challenges in analytics of magic-size clusters, in elucidating their formation mechanism, and in using them as next-generation reagents in colloidal chemistry.

Extraction of magnetic circular dichroism effects from blended mixture of magnetic linear dichroism signals in the cobalt/Scotch tape system

Circular dichroism (CD) signals revealed in some materials may arise from different origins during measurements. Magnetic field dependent CD (MCD) emanating from the spin-polarized band provides direct insight into the spin-spin interband transitions in magnetic materials. On the contrary, natural CD effects which are artefactual signals resulting from the linear polarization (LP) components during the polarization modulation with a photo-elastic modulator in anisotropic polymer systems were usually observed. There is no simple method to reliably distinguish MCD effect due to spin polarized band structures from natural CD effect, which limits our understanding of the magnetic material/polymer hybrid structures. This paper aims to introduce a general strategy of averaging out the magnetic linear dichroism (MLD) contributions due to the anisotropic structure and disentangling MCD signal(s) from natural MCD signal(s). We demonstrate the effectiveness of separating MCD from natural MCD using rotational MCD measurement and presented the results of a sample with Co thin film on polymer Scotch tape (unplasticized polyvinyl chloride) glued on a quartz substrate. We demonstrate that the proposed method can be used as an effective tool in disentangling MCD and natural MCD effects, and it opens prospects to study the magnetic material /polymer hybrid systems.

Detecting electronic structure evolution of semiconductor nanocrystals by magnetic circular dichroism spectroscopy

The evolution of electronic states of nanocrystals under shape variation is hardly detected by conventional optical and electronic instruments due to the condensed electronic levels of nanocrystals. Herein, we demonstrate that magnetic circular dichroism (MCD) spectroscopy is a high-resolution method to monitor this delicate progress on account of the sensitive Zeeman response to electronic states. In particular, the MCD intensity of the first excitonic transition exponentially decreases with the shape changing from quantum dots to quantum rods owing to the increased density of valence pz state with elongation in the z direction, which contributes much less to MCD intensity compared with p±. This work provides a simple but effective strategy for understanding the electronic state evolution in various semiconductor nanomaterials.

Energetic hot electrons from exciton-to-hot electron upconversion in Mn-doped semiconductor nanocrystals

Generation of hot electrons and their utilization in photoinduced chemical processes have been the subjects of intense research in recent years mostly exploring hot electrons in plasmonic metal nanostructures created via decay of optically excited plasmon. Here, we present recent progress made in generation and utilization of a different type of hot electrons produced via biphotonic exciton-to-hot electron "upconversion" in Mn-doped semiconductor nanocrystals. Compared to the plasmonic hot electrons, those produced via biphotonic upconversion in Mn-doped semiconductor nanocrystals possess much higher energy, enabling more efficient long-range electron transfer across the high energy barrier. They can even be ejected above the vacuum level creating photoelectrons, which can possibly produce solvated electrons. Despite the biphotonic nature of the upconversion process, hot electrons can be generated with weak cw excitation equivalent to the concentrated solar radiation without requiring intense or high-energy photons. This perspective reviews recent work elucidating the mechanism of generating energetic hot electrons in Mn-doped semiconductor nanocrystals, detection of these hot electrons as photocurrent or photoelectron emission, and their utilization in chemical processes such as photocatalysis. New opportunities that the energetic hot electrons can open by creating solvated electrons, which can be viewed as the longer-lived and mobile version of hot electrons more useful for chemical processes, and the challenges in practical utilization of energetic hot electrons are also discussed.

Light Emitting Spin Active Electronic States in Ultra-Thin Mn Doped CdSe Layered Nanosheets

The layered nanosheets exhibit a variety of physical and optical properties originating from amalgamation of intra- and inter- layer electronic interactions, which makes them promising materials for advanced devices with varsatile controlling channels. In particular, the dilute magnetic semiconductor multilayered nanosheets have promising optical, electrical and magnetic properties that have been less explored so far. Here, the spin permissible optical properties from solvothermally grown Mn doped CdSe (thickness ~2.26 nm) multilayered nanosheets are reported on. The presence of multi-phase magnetic orderings with a sharp ferromagnetic transition at temperature ~48 K pertinent to the stabilization and co-existence of Mn²⁺ and Mn³⁺ based local phases have been observed from the (Cd,Mn)Se layered nanosheets corroborating to the x-ray absorption near edge structure, electron paramagnetic resonance, Raman scattering and magnetic measurements. The optical absorption and photoluminescence (PL) studies at room temperature affirm wide array of optical properties in the visible regime corresponding to the band edge and intriguing dopant-phase mediated spin approved transitions. The circularly polarized magneto-PL and life time analysis exhibits the spin-polarized fast radiative transitions confirming the presence of spin-active electronic states.

Ionic organic cage-encapsulating phase-transferable metal clusters

Exploration of metal clusters (MCs) adaptive to both aqueous and oil phases without disturbing their size is promising for a broad scope of applications. The state-of-the-art approach via ligand-binding may perturb MCs' size due to varied metal-ligand binding strength when shuttling between solvents of different polarity. Herein, we applied physical confinement of a series of small noble MCs (<1 nm) inside ionic organic cages (I-Cages), which by means of anion exchange enables reversible transfer of MCs between aqueous and hydrophobic solutions without varying their ultrasmall size. Moreover, the MCs@I-Cage hybrid serves as a recyclable, reaction-switchable catalyst featuring high activity in liquid-phase NH3BH3 (AB) hydrolysis reaction with a turnover frequency (TOF) of 115 min-1.

Synthesis and Biomedical Applications of Multifunctional Nanoparticles

The accumulated knowledge of nanoparticle (NP) synthesis for the last 30 years has enabled the development of functional NPs for biomedical applications. Especially, NPs with multifunctional capabilities are gaining popularity as the demand for versatile and efficient NP agents increases. Various combinations of functional materials are integrated to form multicomponent NPs with designed size, structure, and multifunctionality. Their use as diagnostic and/or therapeutic tools is demonstrated, suggesting their application potentials in healthcare and medical practice. Here, the recent achievements in the synthesis and biomedical applications of multifunctional NPs are summarized. Starting with a brief overview regarding the advances in NP synthesis and accompanying progress in nanobiotechnology, various components to construct the multifunctional NP agents, which include polymers and mesoporous, magnetic, catalytic, and semiconducting NPs, are discussed together with their overall integration forms, such as NP assembly, hollow/porous structures, or hybrid/doped systems. Following the explanation of the features that multifunctional NP agents can offer, an outlook and a brief comment regarding the future research directions are provided.

Co2+-Doping of Magic-Sized CdSe Clusters: Structural Insights via Ligand Field Transitions

Magic-sized clusters represent materials with unique properties at the border between molecules and solids and provide important insights into the nanocrystal formation process. However, synthesis, doping, and especially structural characterization become more and more challenging with decreasing cluster size. Herein, we report the successful introduction of Co2+ ions into extremely small-sized CdSe clusters with the intention of using internal ligand field transitions to obtain structural insights. Despite the huge mismatch between the radii of Cd2+ and Co2+ ions (>21%), CdSe clusters can be effectively synthesized with a high Co2+ doping concentration of ∼10%. Optical spectroscopy and mass spectrometry suggest that one or two Co2+ ions are substitutionally embedded into (CdSe)13 clusters, which is known as one of the smallest CdSe clusters. Using magnetic circular dichroism spectroscopy on the intrinsic ligand field transitions between the different 3d orbitals of the transition metal dopants, we demonstrate that the Co2+ dopants are embedded on pseudotetrahedral selenium coordinated sites despite the limited number of atoms in the clusters. A significant shortening of Co-Se bond lengths compared to bulk or nanocrystals is observed, which results in the metastability of Co2+ doping. Our results not only extend the doping chemistry of magic-sized semiconductor nanoclusters, but also suggest an effective method to characterize the local structure of these extremely small-sized clusters.

Microwave assisted robust aqueous synthesis of Mn2+-doped CdSe QDs with enhanced electronic properties

Doping of CdSe QDs with Mn(ii) was successfully developed in cost-effective aqueous medium resulting in enhanced electrical conductivity and memristor properties.