Urea-Functionalized Self-Assembled Molecular Prism for Heterogeneous Catalysis in Water

Self-Assembly of a Water-Soluble Pd16 Square Bicupola Architecture and Its Use in Aerobic Oxidation in Aqueous Medium

Designing supramolecular architectures with uncommon geometries has always been a key goal in the field of metal-ligand coordination-driven self-assembly. It acquires added significance if functional building units are employed in constructing such architectures for fruitful applications. In this report, we address both these aspects by developing a water-soluble Pd16L8 coordination cage 1 with an unusual square orthobicupola geometry, which was used for selective aerobic oxidation of aryl sulfides. Self-assembly of a benzothiadiazole-based tetra-pyridyl donor L with a ditopic cis-[(tmeda)Pd(NO3)2] acceptor [tmeda = N,N,N',N'-tetramethylethane-1,2-diamine] produced 1, and the geometry was determined by single-crystal X-ray diffraction study. Unlike the typically observed tri- or tetrafacial barrel, the present Pd16L8 coordination assembly features a distinctive structural topology and is a unique example of a water-soluble molecular architecture with a square orthobicupola geometry. Efficient and selective aerobic oxidation of sulfides to sulfoxides is an important challenge as conventional oxidation generally leads to the formation of sulfoxide along with toxic sulfone. Cage 1, designed with a ligand containing a benzothiadiazole moiety, demonstrates an ability to photogenerate reactive oxygen species (ROS) in water, thus enabling it to serve as a potential photocatalyst. The cage showed excellent catalytic efficiency for highly selective conversion of alkyl and aryl sulfides to their corresponding sulfoxides, therefore without the formation of toxic sulfones and other byproducts, under visible light in aqueous medium.

Coordination cages integrated into swelling poly(ionic liquid)s for guest encapsulation and separation

Coordination cages have been widely reported to bind a variety of guests, which are useful for chemical separation. Although the use of cages in the solid state benefits the recycling, the flexibility, dynamicity, and metal-ligand bond reversibility of solid-state cages are poor, preventing efficient guest encapsulation. Here we report a type of coordination cage-integrated solid materials that can be swelled into gel in water. The material is prepared through incorporation of an anionic FeII4L6 cage as the counterion of a cationic poly(ionic liquid) (MOC@PIL). The immobilized cages within MOC@PILs have been found to greatly affect the swelling ability of MOC@PILs and thus the mechanical properties. Importantly, upon swelling, the uptake of water provides an ideal microenvironment within the gels for the immobilized cages to dynamically move and flex that leads to excellent solution-level guest binding performances. This concept has enabled the use of MOC@PILs as efficient adsorbents for the removal of pollutants from water and for the purification of toluene and cyclohexane. Importantly, MOC@PILs can be regenerated through a deswelling strategy along with the recycling of the extracted guests.

Shape-Complementary Multicomponent Assembly of Low-Symmetry Co(III)Salphen-Based Coordination Cages

While metal-mediated self-assembly is a popular technique to construct discrete nanosized objects, highly symmetric structures, built from one type of ligand at a time, are dominating reported systems. The tailored integration of a set of different ligands requires sophisticated approaches to avoid narcissistic separation or formation of statistical mixtures. Here, we demonstrate how the combination of three structure-guiding effects (metal-templated macrocyclization, additional bridging ligands and shape-complementarity) based on Co(III)salphen metal nodes allows for a rational and high-yielding synthesis of structurally complex, lantern-shaped cages with up to four differentiable bridges. Three new heteroleptic coordination cages based on dinuclear Co(III)salphen macrocycles were synthesized in a one-pot reaction approach and fully characterized, including single crystal X-ray analyses. One cage groups two of the same ligands, another two different ligands around a symmetric Co2-bis-salphen ring. In the most complex structure, this ring is unsymmetric, rendering all four connections between the two metal centers distinguishable. While heteroleptic assembly around Pd(II) nodes has been shown to be dynamic, beneficial for cage-to-cage transformations, assembly cascades and adaptive systems, the herein introduced cages based on kinetically more inert Co(III)salphen will be advantageous for applications in enzyme-like catalysis and molecular machinery that require enhanced structural and chemical stability.

Non-statistical assembly of multicomponent [Pd2ABCD] cages

Self-assembled hosts, inspired by biological receptors and catalysts, show application potential in sustainable synthesis, energy conversion and medicine. Implementing multiple functionalities in the form of distinguishable building blocks, however, is difficult without risking narcissistic self-sorting or a statistical mess. Here we report a systematic series of integratively self-assembled heteroleptic cages in which two square-planar PdII cations are bridged by four different bis-pyridyl ligands, A, B, C and D, via synergistic effects to exclusively form a single isomer-the lantern-shaped cage [Pd2ABCD]. This self-sorting goal-forming just one out of 55 possible structures-is reached under full thermodynamic control and can be realized progressively (by combining progenitors, such as [Pd2A2C2] with [Pd2B2D2]), directly from ligands and PdII cations or by mixing all four corresponding homoleptic cages. The rational design of complex multicomponent assemblies that enables the modular incorporation of diverse chemical moieties will advance their applicability in functional nanosystems.

A water-soluble Pd4 molecular tweezer for selective encapsulation of isomeric quinones and their recyclable extraction

Quinones (QN) are one of the main components of diesel exhaust particulates that have significant detrimental effects on human health. Their extraction and purification have been challenging tasks because these atmospheric particulates exist as complex matrices consisting of inorganic and organic compounds. In this report, we introduce a new water soluble Pd4L2 molecular architecture (MT) with an unusual tweezer-shaped structure obtained by self-assembly of a newly designed phenothiazine-based tetra-imidazole donor (L) with the acceptor cis-[(tmeda)Pd(NO3)2] (M) [ tmeda = N,N,N',N'-tetramethylethane-1,2-diamine]. The molecular tweezer encapsulates some quinones existing in diesel exhaust particulates (DEPs) leading to the formation of host-guest complexes in 1 : 1 molar ratio. Moreover, MT binds phenanthrenequinone (PQ) more strongly than its isomer anthraquinone (AQ), an aspect that enables extraction of PQ with a purity of 91% from an equimolar mixture of the two isomers. Therefore, MT represents an excellent example of supramolecular receptor capable of selective aqueous extraction of PQ from PQ/AQ with many cycles of reusability.

Triamine and Tetramine Edge-Length Matching Drives Heteroleptic Triangular and Tetragonal Prism Assembly

Heteroleptic metal-organic capsules, which incorporate more than one type of ligand, can provide enclosed, anisotropic interior cavities for binding low-symmetry molecules of biological and industrial importance. However, the selective self-assembly of a single mixed-ligand architecture, as opposed to the numerous other possible self-assembly outcomes, remains a challenge. Here, we develop a design strategy for the subcomponent self-assembly of heteroleptic metal-organic architectures with anisotropic internal void spaces. Zn6Tet3Tri2 triangular prismatic and Zn8Tet2Tet'4 tetragonal prismatic architectures were prepared through careful matching of the side lengths of the tritopic (Tri) or tetratopic (Tet, Tet') and panels.

Ring-Opening Polymerization of Cyclic Esters and Carbonates with (Thio)urea/Cyclopropenimine Organocatalytic Systems

Organocatalyzed ring-opening polymerization is a powerful tool for the synthesis of a variety of functional, readily degradable polyesters and polycarbonates. We report the use of (thio)ureas in combination with cyclopropenimine bases as a unique catalyst for the polymerization of cyclic esters and carbonates with a large span of reactivities. Methodologies of exceptionally effective and selective cocatalyst combinations were devised to produce polyesters and polycarbonates with narrow dispersities (Đ = 1.01-1.10). Correlations of the pKa of the various ureas and cyclopropenimine bases revealed the critical importance of matching the pKa of the two cocatalysts to achieve the most efficient polymerization conditions. It was found that promoting strong H-bonding interactions with a noncompetitive organic solvent, such as CH2Cl2, enabled greatly increased polymerization rates. The stereoselective polymerization of rac-lactide afforded stereoblock poly(lactides) that crystallize as stereocomplexes, as confirmed by wide-angle X-ray scattering.

Pt(II) Tetrafacial Barrel with Aggregation-Induced Emission for Sensing

A new tetraphenylpyrazine-based tetraimidazole ligand (L) was synthesized and used for subcomponent self-assembly with cis-(tmeda)Pd(NO3)2 and cis-Pt(PEt3)2(OTf)2, leading to the formation of two tetrafacial barrels [Pd8L4(tmeda)8](NO3)16 (1) and [Pt8L4(PEt3)16](OTf)16 (2), respectively. Although ligand L is aggregation-induced emission (AIE) active, barrel 2 showed a magnificently higher AIE activity than ligand L, while 1 failed to retain the AIE properties of the ligand. Pd(II) barrel 1, undergoing an aggregation-caused quenching (ACQ) phenomenon, nullified the AIE activity of the ligand to be used in the photophysical application. The enhanced emission in the aggregated state of Pt(II) barrel 2 was used for the recognition of picric acid (PA), which is explosive in nature and one of the groundwater contaminants in landmine areas. The recognition of picric acid was found to be selective in comparison with that of other nitroaromatic compounds (NACs), which could be attributed to ground-state complex formation and resonance energy transfer between picric acid and barrel 2. The use of new AIE-active assembly 2 for selective detection of PA with a low detection limit is noteworthy.

Self-Assembly of an [M8 L24 ]16+ Intertwined Cube and a Giant [M12 L16 ]24+ Orthobicupola

Through coordination-driven self-assembly, aesthetically captivating structures can be formed by tuning the length or flexibility of various components. The self-assembly of an elongated rigid terphenyl-based tetra-pyridyl ligand (L1) with a cis-Pd(II) acceptor produces an [M12 L16 ]24+ triangular orthobicupola structure (1). When flexibility is introduced into the ligand by the incorporation of a -CH2 - group between the dipyridylamine and terphenyl rings in the ligand (L2), anunique [M8 L24 ]16+ water-soluble 'intertwined cubic structure' (2) results. The inherent flexibility of ligand L2 might be the key factor behind the formation of the thermodynamically stable and 'intertwined cubic structure' in this scenario. This research showcases the ability to design and fabricate novel, topologically distinctive molecular structures by a straightforward and efficient approach.

Assembly of Six Types of Heteroleptic Pd2L4 Cages under Kinetic Control

Heteroleptic assemblies composed of several kinds of building blocks have been seen in nature. It is still unclear how natural systems design and create such complicated assemblies selectively. Past efforts on multicomponent self-assembly of artificial metal-organic cages have mainly focused on finding a suitable combination of building blocks to lead to a single multicomponent self-assembly as the thermodynamically most stable product. Here, we present another approach to selectively produce multicomponent Pd(II)-based self-assemblies under kinetic control based on the selective ligand exchanges of weak Pd-L coordination bonds retaining the original orientation of the metal centers in a kinetically stabilized cyclic structure and on local reversibility given in certain areas of the energy landscape in the presence of the assist molecule that facilitates error correction of coordination bonds. The kinetic approach enabled us to build all six types of Pd2L4 cages and heteroleptic tetranuclear cages composed of three kinds of ditopic ligands. Although the cage complexes thus obtained are metastable, they are stable for 1 month or more at room temperature.

A ring of rotaxanes: studies of a large paramagnetic assembly in solution

Here we report the synthesis and structural characterization of four [7]rotaxanes formed by coordinating hybrid inorganic-organic [2]rotaxanes to a central {Ni12} core. X-ray single crystal diffraction demonstrate that [7]rotaxanes are formed, with a range of conformations in the crystal. Small angle X-ray scattering supported by molecular dynamic simulations demonstrates that the large molecules are stable in solution and also show that the conformers present in solution are not those found in the crystal. Pulsed EPR spectroscopy show that phase memory times for the {Cr7Ni} rings, which have been proposed as qubits, are reduced but not dramatically by the presence of the {Ni12} cage.

Guest Encapsulation Alters the Thermodynamic Landscape of a Coordination Host

The architecture of self-assembled host molecules can profoundly affect the properties of the encapsulated guests. For example, a rigid cage with small windows can efficiently protect its contents from the environment; in contrast, tube-shaped, flexible hosts with large openings and an easily accessible cavity are ideally suited for catalysis. Here, we report a "Janus" nature of a Pd6L4 coordination host previously reported to exist exclusively as a tube isomer (T). We show that upon encapsulating various tetrahedrally shaped guests, T can reconfigure into a cage-shaped host (C) in quantitative yield. Extracting the guest affords empty C, which is metastable and spontaneously relaxes to T, and the T⇄C interconversion can be repeated for multiple cycles. Reversible toggling between two vastly different isomers paves the way toward controlling functional properties of coordination hosts "on demand".

Supramolecular Subphthalocyanine Cage as Catalytic Container for the Functionalization of Fullerenes in Water

Herein we report the first example of a supramolecular cage that works as a catalytic molecular reactor to perform transformations over fullerenes in aqueous medium. Taking advantage of the ability of metallo-organic Pd(II)-subphthalocyanine (SubPc) capsules to form stable host:guest complexes with C60 , we have prepared a water-soluble cage that provides a hydrophobic environment for conducting cycloadditions over encapsulated C60 , namely, Diels-Alder reactions with anthracene. Indeed, the presence of catalytic amounts of SubPc cage dissolved in water promotes co-encapsulation of insoluble C60 and anthracene substrates, allowing the reaction to occur inside the cavity under mild conditions. The lower stability of the host:guest complex with the resulting C60 cycloadduct facilitates its displacement by pristine C60 , which grants catalytic turnover. Moreover, bis-addition compounds are regioselectively formed inside the cage when using excess anthracene.

Picking the lock of coordination cage catalysis

The design principles of metallo-organic assembly reactions have facilitated access to hundreds of coordination cages of varying size and shape. Many of these assemblies possess a well-defined cavity capable of hosting a guest, pictorially mimicking the action of a substrate binding to the active site of an enzyme. While there are now a growing collection of coordination cages that show highly proficient catalysis, exhibiting both excellent activity and efficient turnover, this number is still small compared to the vast library of metal-organic structures that are known. In this review, we will attempt to unpick and discuss the key features that make an effective coordination cage catalyst, linking structure to activity (and selectivity) using lessons learnt from both experimental and computational analysis of the most notable exemplars. We will also provide an outlook for this area, reasoning why coordination cages have the potential to become the gold-standard in (synthetic) non-covalent catalysis.

Distinct selectivity inside self-assembled coordination cages

Supramolecular containers have long been applied to regulate organic reactions with distinct selectivity, owing to their diverse functions such as the ability to pose a guest molecule(s) with a certain orientation and conformation. In this review, we try to illustrate how self-assembled coordination cages could achieve this goal. Two representative cage hosts, namely, self-assembled Pd(II)-ligand octahedral coordination cages ([Pd6L4]12+) and self-assembled Ga(III)-ligand tetrahedral coordination cages ([Ga4L6]12-) are selected as the pilot hosts that this mini review covers. Representative works in this area are presented here in brief.

Confinement inside MOFs Enables Guest-Modulated Spin Crossover of Otherwise Low-Spin Coordination Cages

Confinement of discrete coordination cages within nanoporous lattices is an intriguing strategy to gain unusual properties and functions. We demonstrate here that the confinement of coordination cages within metal-organic frameworks (MOFs) allows the spin state of the cages to be regulated through multilevel host-guest interactions. In particular, the confined in situ self-assembly of an anionic FeII4L6 nanocage within the mesoporous cationic framework of MIL-101 leads to the ionic MOF with an unusual hierarchical host-guest structure. While the nanocage in solution and in the solid state has been known to be invariantly diamagnetic with low-spin FeII, FeII4L6@MIL-101 exhibits spin-crossover (SCO) behavior in response to temperature and release/uptake of water guest within the MOF. The distinct color change concomitant with water-induced SCO enables the use of the material for highly selective colorimetric sensing of humidity. Moreover, the spin state and the SCO behavior can be modulated also by inclusion of a guest into the hydrophobic cavity of the confined cage. This is an essential demonstration of the phenomenon that the confinement within porous solids enables an SCO-inactive cage to show modulable SCO behaviors, opening perspectives for developing functional supramolecular materials through hierarchical host-guest structures.

Crown ether-like discrete clusters for sodium binding and gas adsorption

Hexanuclear polyoxomolybdenum-based discrete supermolecules Na_x[Mo^V₆O₆(μ₂-O)₉(Htrz)_6-x(trz)_x]·nH₂O (x = 0, n = 15, 1; x = 1, n = 12, 2; x = 2, n = 10, 3; x = 2, n = 49, 4; Htrz = 1H-1,2,3-triazole) have been prepared and fully characterized with different amounts of sodium cations inside and outside the intrinsic holes. Structural analyses demonstrate that they all exist a triangular channel constructed by six molybdenum-oxygen groups with inner diameters of 2.86 (1), 2.48 (2), and 3.04 (3/4) Å, respectively. Zero, one, or two univalent enthetic guest Na⁺ have been hosted around the structural centers, which reflect the expansion and contraction effects at microscopic level. Water-soluble species can serve as crown ether-like metallacycles before and after the sodium binding. Diverse nanoscale pores are further formed through intermolecular accumulations with hydrogen bonding. Gas adsorption studies indicate that 2-4 can selectively adsorb CO₂ and O₂ but have little or even no affinities toward H₂, N₂, and CH₄. Theoretical calculations corroborate the roles of Na⁺ and auxiliary ligand with different states in bond distances, molecular orbitals, electrostatic potentials, and lattice energies in these discrete clusters. The binding orders of sodium cations in 2-4 are similar with the classical crown ethers, where 2 is the strongest one with 2.226(4)_av Å for sodium cation bonded to six O atoms.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Synthesis, characterization, and heparin-binding study of a self-assembled p-cymene-Ru(II) metallocycle based on a 4-amino-1,8-naphthalimide Tröger's base supramolecular scaffold

We report the very first example of a self-assembled p-cymene-Ru(II) metallocycle based on a green emitting 4-amino-1,8-naphthalimide Tröger's base (TBNap) supramolecular scaffold. A new cleft-shaped TBNap-derived di-4-picolyl donor was synthesized and reacted in a 2 : 2 stoichiometry ratio with a dinuclear Ru(II) acceptor (Ru-A) to generate a [2 + 2] self-assembled metallocycle (TBNap-Ru-MC) in good yield. Both TBNap and TBNap-Ru-MC showed positive solvatochromism in different solvents with varying polarities. In addition, the binding propensity of cationic TBNap-Ru-MC toward the heparin polyanion was determined using fluorescence titration studies. The initial fluorescence emission of TBNap-Ru-MC was quenched upon the gradual addition of the heparin polyanion, and the Stern-Volmer quenching constant (K_SV) was calculated to be 3.97 × 10⁵ M^-1.

Controlled Construction of Heteroleptic [Pd2 (LA )2 (LB )(LC )]4+ Cages: A Facile Approach for Site-Selective endo-Functionalization of Supramolecular Cavities

Construction of supramolecular structures with internal functionalities is a promising approach to build enzyme-like cavities. The endo-functionalized [Pd₁₂ L₂₄ ] and [Pd₂ L₄ ] coordination cages represent the most successful systems in this regard. However, these systems mainly contain one type of endo-moiety. We herein provide a solution for the controlled endo-functionalization of [Pd₂ L₄ ] cages. Site-selective introduction of the endo-functional group was achieved through the formation of heteroleptic [Pd₂ (L^A )₂ (L^B )(L^C )] cages. Using two orthogonal steric control elements is the key for the selective formation of the hetero-assemblies. We demonstrated the construction of two hetero-cages with a single internal functional group as well as a hetero-cage with two distinct endohedral functionalities. The endo-functionalized hetero-cages bound sulfonate guests with fast-exchange dynamics. This strategy provides a new solution for the controlled endo-functionalization of supramolecular cavities.

A Platinum(II)-Based Molecular Cage with Aggregation-Induced Emission for Enzymatic Photocyclization of Alkynylaniline

Enzymes facilitate chemical conversions through the collective activity of aggregated components, but the marriage of aggregation-induced emission (AIE) with molecular containers to emulate enzymatic conversion remains challenging. Herein, we report a new approach to construct a Pt^II -based octahedral cage with AIE characteristics for the photocyclization of alkynylaniline by restricting the rotation of the pendant phenyl rings peripheral to the Pt^II corner. With the presence of water, the C-H⋅⋅⋅π interactions involving the triphenylphosphine fragments resulted in aggregation of the molecular cages into spherical particles and significantly enhanced the Pt^II -based luminescence. The kinetically inert Pt-NP chelator, with highly differentiated redox potentials in the ground and excited states, and the efficient coordination activation of the platinum corner facilitated excellent catalysis of the photocyclization of alkynylaniline. The enzymatic kinetics and the advantages of binding and activating substrates in an aqueous medium provide a new avenue to develop mimics for efficient photosynthesis.

Guest‐Modulated Circularly Polarized Luminescence by Ligand‐to‐Ligand Chirality Transfer in Heteroleptic Pd II Coordination Cages

Multicomponent metallo‐supramolecular assembly allows the rational combination of different building blocks. Discrete multifunctional hosts with an accessible cavity can be prepared in a non‐statistical fashion. We employ our shape‐complementary assembly (SCA) method to achieve for the first time integrative self‐sorting of heteroleptic Pd^II cages showing guest‐tunable circularly polarized luminescence (CPL). An enantiopure helicene‐based ligand (M or P configuration) is coupled with a non‐chiral emissive fluorenone‐based ligand (A or B) to form a series of Pd₂L₂L′₂ assemblies. The modular strategy allows to impart the chiral information of the helicenes to the overall supramolecular system, resulting in CPL from the non‐chiral component. Guest binding results in a 4‐fold increase of CPL intensity. The principle offers potential to generate libraries of multifunctional materials with applications in molecular recognition, enantioselective photo‐redox catalysis and information processing.

Multicomponent Pseudorotaxane Quadrilateral as Dual-Way Logic AND Gate with Two Catalytic Outputs

A multicomponent pseudorotaxane quadrilateral was reversibly toggled between three distinct switching states. Switching in the forward conversion was achieved by addition of H⁺ and K⁺ ions, and switching in the reverse direction was performed by addition of 18-crown-6 and 1-aza-18-crown-6. In both the forward and backward ways, the inputs operated an AND gate with distinct catalytic outputs. While in the forward direction the logic AND operation starting from a heteroleptic five-component assembly turned "ON" an imine hydrolysis as output (AND-1), in the inverse direction a Michael addition was ignited as the output starting from a seven-component aggregate following the AND gate logic (AND-2).

Polarization Engineering of Covalent Triazine Frameworks for Highly Efficient Photosynthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Two-electron oxygen photoreduction to hydrogen peroxide (H₂ O₂ ) is seriously inhibited by its sluggish charge kinetics. Herein, a polarization engineering strategy is demonstrated by grafting (thio)urea functional groups onto covalent triazine frameworks (CTFs), giving rise to significantly promoted charge separation/transport and obviously enhanced proton transfer. The thiourea-functionalized CTF (Bpt-CTF) presents a substantial improvement in the photocatalytic H₂ O₂ production rate to 3268.1 µmol h^-1 g^-1 with no sacrificial agents or cocatalysts that is over an order of magnitude higher than unfunctionalized CTF (Dc-CTF), and a remarkable quantum efficiency of 8.6% at 400 nm. Mechanistic studies reveal the photocatalytic performance is attributed to the prominently enhanced two-electron oxygen reduction reaction by forming endoperoxide at the triazine unit and highly concentrated holes at the thiourea site. The generated O₂ from water oxidation is subsequently consumed by the oxygen reduction reaction (ORR), thereby boosting overall reaction kinetics. The findings suggest a powerful functional-groups-mediated polarization engineering method for the development of highly efficient metal-free polymer-based photocatalysts.

Shape Complementary Coordination Self-Assembly of a Redox-Active Heteroleptic Complex

We present here the coordination self-assembly of a new heteroleptic (bpyPd)₄L¹L₂² coordination complex (1) from one novel pyridinium-functionalized bis-2,4,6-tris(pyridin-3-yl)-1,3,5-triazine (bis-3-TPT, L¹) macrocyclic ligand, two separate 3-TPT (L²) ligands, and four cis-blocking bpyPd(NO₃)₂ (bpy = 2,2'-bipyridine). While homoleptic self-assemblies with either L¹ or L² gave dynamic mixtures of products, a single thermodynamic heteroleptic complex was obtained driven by the shape complementarity of building blocks. Moreover, the redox-active nature of the heteroleptic assembly facilitates the highly efficient catalytic aerobic photo-oxidation of aromatic secondary alcohols under mild conditions.

Heteroleptic metallosupramolecular aggregates/complexation for supramolecular catalysis

Supramolecular catalysis is reviewed with an eye on heteroleptic aggregates/complexation. Since most of the current metallosupramolecular catalytic systems are homoleptic in nature, the idea of breaking/reducing symmetry has ignited a vivid search for heteroleptic aggregates that are made up by different components. Their higher degree of functional diversity and structural heterogeneity allows, as demonstrated by Nature by the multicomponent ATP synthase motor, a more detailed and refined configuration of purposeful machinery. Furthermore, (metallo)supramolecular catalysis is shown to extend beyond the single "supramolecular unit" and to reach far into the field and concepts of systems chemistry and information science.

Molecular Cavity for Catalysis and Formation of Metal Nanoparticles for Use in Catalysis

The employment of weak intermolecular interactions in supramolecular chemistry offers an alternative approach to project artificial chemical environments like the active sites of enzymes. Discrete molecular architectures with defined shapes and geometries have become a revolutionary field of research in recent years because of their intrinsic porosity and ease of synthesis using dynamic non-covalent/covalent interactions. Several porous molecular cages have been constructed from simple building blocks by self-assembly, which undergoes many self-correction processes to form the final architecture. These supramolecular systems have been developed to demonstrate numerous applications, such as guest stabilization, drug delivery, catalysis, smart materials, and many other related fields. In this respect, catalysis in confined nanospaces using such supramolecular cages has seen significant growth over the years. These porous discrete cages contain suitable apertures for easy intake of substrates and smooth release of products to exhibit exceptional catalytic efficacy. This review highlights recent advancements in catalytic activity influenced by the nanocavities of hydrogen-bonded cages, metal-ligand coordination cages, and dynamic or reversible covalently bonded organic cages in different solvent media. Synthetic strategies for these three types of supramolecular systems are discussed briefly and follow similar and simplistic approaches manifested by simple starting materials and benign conditions. These examples demonstrate the progress of various functionalized molecular cages for specific chemical transformations in aqueous and nonaqueous media. Finally, we discuss the enduring challenges related to porous cage compounds that need to be overcome for further developments in this field of work.

Beyond Platonic: How to Build Metal-Organic Polyhedra Capable of Binding Low-Symmetry, Information-Rich Molecular Cargoes

The field of metallosupramolecular chemistry has advanced rapidly in recent years. Much work in this area has focused on the formation of hollow self-assembled metal-organic architectures and exploration of the applications of their confined nanospaces. These discrete, soluble structures incorporate metal ions as ‘glue’ to link organic ligands together into polyhedra.Most of the architectures employed thus far have been highly symmetrical, as these have been the easiest to prepare. Such high-symmetry structures contain pseudospherical cavities, and so typically bind roughly spherical guests. Biomolecules and high-value synthetic compounds are rarely isotropic, highly-symmetrical species. To bind, sense, separate, and transform such substrates, new, lower-symmetry, metal-organic cages are needed. Herein we summarize recent approaches, which taken together form the first draft of a handbook for the design of higher-complexity, lower-symmetry, self-assembled metal-organic architectures.

An Adaptable Water-Soluble Molecular Boat for Selective Separation of Phenanthrene from Isomeric Anthracene

Anthracene crude oil is a common source of phenanthrene for its industrial use. The isolation of phenanthrene from this source is a challenging task due to very similar physical properties to its isomer anthracene. We report here a water-soluble Pd(II) molecular boat (MB1) with unusual structural topology that was obtained by assembling a flexible tetrapyridyl donor (L) with a cis-Pd(II) acceptor. The flexible backbone of the boat enabled it to breathe in the presence of a guest optimizing the fit within the cavity. The boat binds phenanthrene more strongly than anthracene, which enabled separation of phenanthrene with an >98% purity from an equimolar mixture of the two isomers using MB1 as an extracting agent. MB1 represents a unique example of a coordination receptor suitable for selective aqueous extraction of phenanthrene from anthracene with reusability of several cycles.

Templation and Concentration Drive Conversion Between a FeII12L12 Pseudoicosahedron, a FeII4L4 Tetrahedron, and a FeII2L3 Helicate

We report the construction of three structurally distinct self-assembled architectures: Fe^II₁₂L₁₂ pseudoicosahedron 1, Fe^II₂L₃ helicate 2, and Fe^II₄L₄ tetrahedron 3, formed from a single triazatriangulenium subcomponent A under different reaction conditions. Pseudoicosahedral capsule 1 is the largest formed through subcomponent self-assembly to date, with an outer-sphere diameter of 5.4 nm and a cavity volume of 15 nm³. The outcome of self-assembly depended upon concentration, where the formation of pseudoicosahedron 1 was favored at higher concentrations, while helicate 2 exclusively formed at lower concentrations. The conversion of pseudoicosahedron 1 or helicate 2 into tetrahedron 3 occurred following the addition of a CB₁₁H₁₂^- or B₁₂F₁₂^2- template.

Orientational self-sorting: formation of structurally defined Pd4L8 and Pd6L12 cages from low-symmetry dipyridyl ligands

Tetra- and hexanuclear coordination cages were obtained in reactions of [Pd(CH₃CN)₄](BF₄)₂ with low-symmetry dipyridyl ligands. In both cases, only one structurally defined complex was formed out of a vast pool of potential isomers.

Chemoresponsive Supramolecular Polypseudorotaxanes with Infinite Switching Capability

Chemoresponsive supramolecular systems with infinite switching capability are important for applications in recycled materials and intelligent devices. To attain this objective, here a chemoresponsive polypseudorotaxane is reported on the basis of a bis(p-phenylene)-34-crown-10 macrocycle (H) and a cyano-substituted viologen guest (G). H and G form a [2]pseudorotaxane (H⊃G) both in solution and in the solid state. Upon addition of AgSF₆ , a polypseudorotaxane (denoted as [H⋅G⋅Ag]_n ) forms as synergistically driven by host-guest complexation and metal-coordination interactions. [H⋅G⋅Ag]_n depolymerizes into a [3]pseudorotaxane (denoted as H₂ ⋅G⋅Ag₂ ⋅acetone₂ ) upon addition of H and AgSF₆ , while it reforms with successive addition of G. The transformations between [H⋅G⋅Ag]_n and H₂ ⋅G⋅Ag₂ ⋅acetone₂ can be switched for infinite cycles, superior to the conventional chemoresponsive supramolecular polymeric systems with limited switching capability.

Construction of Entropically Favored Supramolecular Metal-Ligand Trimeric Assemblies Supported by Flexible Pyridylaminophosphorus(V) Scaffolds

The self-assembly reactions of tetratopic metal acceptors with the flexible bidentate ligands are known to yield self-assembled molecular squares of the type [M₄L₈], triangles of composition [M₃L₆], or a mixture of these two. In this work, we demonstrate the preferential formation of a trimeric cage assembly of the formula [Pd₃(L¹)₆·(BF₄)₆] (1a) over the tetrameric cage [Pd₄(L¹)₈·(BF₄)₈] (1b) by employing a flexible dipodal phosphoramide ligand, [PhPO(NH(3-Py))₂] (L¹; 3-Py = 3-aminopyridine), in a reaction with [Pd(CH₃CN)₄·(BF₄)₂]. The entropically favored trimeric self-assembly of 1a is the predominant species in the solution [dimethyl sulfoxide (DMSO)-d₆] at room temperature. In fact, at higher temperatures, 1a was found to be the only product, as observed from the disappearance of the peak due to 1b in the ³¹P NMR spectrum. However, in a 1:1 mixture of acetonitrile (MeCN)-d₃ and DMSO-d₆, the tetrameric species 1b is the preferred species, as revealed by the ³¹P NMR and electrospray ionization mass spectral analyses. The structure of the molecular trimer 1a has been established in the solid state by using single-crystal X-ray diffraction analysis. Interestingly, treatment of an another flexible ligand, [MePO(NH(3-Py))₂] (L²), with the same Pd(II) acceptor resulted in exclusive formation of the trimeric cage [Pd₃(L²)₆·(BF₄)₆] (2).

New horizons for catalysis disclosed by supramolecular chemistry

The adoption of a supramolecular approach in catalysis promises to address a number of unmet challenges, ranging from activity (unlocking of novel reaction pathways) to selectivity (alteration of the innate selectivity of a reaction, e.g. selective functionalization of C-H bonds) and regulation (switch ON/OFF, sequential catalysis, etc.). Supramolecular tools such as reversible association and recognition, pre-organization of reactants and stabilization of transition states upon binding offer a unique chance to achieve the above goals disclosing new horizons whose potential is being increasingly recognized and used, sometimes reaching the degree of ripeness for practical use. This review summarizes the main developments that have opened such new frontiers, with the aim of providing a guide to researchers approaching the field. We focus on artificial supramolecular catalysts of defined stoichiometry which, under homogeneous conditions, unlock outcomes that are highly difficult if not impossible to attain otherwise, namely unnatural reactivity or selectivity and catalysis regulation. The different strategies recently explored in supramolecular catalysis are concisely presented, and, for each one, a single or very few examples is/are described (mainly last 10 years, with only milestone older works discussed). The subject is divided into four sections in light of the key design principle: (i) nanoconfinement of reactants, (ii) recognition-driven catalysis, (iii) catalysis regulation by molecular machines and (iv) processive catalysis.

Coordination-Driven Selective Formation of D2 Symmetric Octanuclear Organometallic Cages

The coordination-driven self-assembly of organometallic half-sandwich iridium(III)- and rhodium(III)-based building blocks with asymmetric ambidentate pyridyl-carboxylate ligands is described. Despite the potential for obtaining a statistical mixture of multiple products, D₂ symmetric octanuclear cages were formed selectively by taking advantage of the electronic effects emanating from the two types of chelating sites - (O,O') and (N,N') - on the tetranuclear building blocks. The metal sources and the lengths of bridging ligands influence the selectivity of the self-assembly. Experimental observations, supported by computational studies, suggest that the D₂ symmetric cages are the thermodynamically favored products. Overall, the results underline the importance of electronic effects on the selectivity of coordination-driven self-assembly, and demonstrate that asymmetric ambidentate ligands can be used to control the design of discrete supramolecular coordination complexes.

Tuning the Size and Geometry of Heteroleptic Coordination Cages by Varying the Ligand Bent Angle

Spherical assemblies of the type [Pd_n L_2n ]²ⁿ⁺ can be obtained from Pd^II salts and curved N-donor ligands, L. It is well established that the bent angle, α, of the ligand is a decisive factor in the self-assembly process, with larger angles leading to complexes with a higher nuclearity, n. Herein, we report heteroleptic coordination cages of the type [Pd_n L_n L'_n ]²ⁿ⁺ , for which a similar correlation between the ligand bent angle and the nuclearity is observed. Tetranuclear cages were obtained by combining [Pd(CH₃ CN)₄ ](BF₄ )₂ with 1,3-di(pyridin-3-yl)benzene and ligands featuring a bent angle of α=120°. The use of a dipyridyl ligand with α=149° led to the formation of a hexanuclear complex with a trigonal prismatic geometry; for linear ligands, octanuclear assemblies of the type [Pd₈ L₈ L'₈ ]¹⁶⁺ were obtained. The predictable formation of heteroleptic Pd^II cages from 1,3-di(pyridin-3-yl)benzene and different dipyridyl ligands is evidence that there are entire classes of heteroleptic cage structures that are privileged from a thermodynamic point of view.

Selective Photodimerization in a Cyclodextrin Metal-Organic Framework

For the most part, enzymes contain one active site wherein they catalyze in a serial manner chemical reactions between substrates both efficiently and rapidly. Imagine if a situation could be created within a chiral porous crystal containing trillions of active sites where substrates can reside in vast numbers before being converted in parallel into products. Here, we report how it is possible to incorporate 1-anthracenecarboxylate (1-AC^-) as a substrate into a γ-cyclodextrin-containing metal-organic framework (CD-MOF-1), where the metals are K⁺ cations, prior to carrying out [4+4] photodimerizations between pairs of substrate molecules, affording selectively one of four possible regioisomers. One of the high-yielding regioisomers exhibits optical activity as a result of the presence of an 8:1 ratio of the two enantiomers following separation by high-performance liquid chromatography. The solid-state superstructure of 1-anthracenecarboxylate potassium salt (1-ACK), which is co-crystallized with γ-cyclodextrin, reveals that pairs of substrate molecules are not only packed inside tunnels between spherical cavities present in CD-MOF-1, but also stabilized-in addition to hydrogen-bonding to the C-2 and C-3 hydroxyl groups on the d-glucopyranosyl residues present in the γ-cyclodextrin tori-by combinations of hydrophobic and electrostatic interactions between the carboxyl groups in 1-AC^- and four K⁺ cations on the waistline between the two γ-cyclodextrin tori in the tunnels. These non-covalent bonding interactions result in preferred co-conformations that account for the highly regio- and enantioselective [4+4] cycloaddition during photoirradiation. Theoretical calculations, in conjunction with crystallography, support the regio- and stereochemical outcome of the photodimerization.

Increasing structural and functional complexity in self-assembled coordination cages

Progress in metallo-supramolecular chemistry creates potential to synthesize functional nano systems and intelligent materials of increasing complexity. In the past four decades, metal-mediated self-assembly has produced a wide range of structural motifs such as helicates, grids, links, knots, spheres and cages, with particularly the latter ones catching growing attention, owing to their nano-scale cavities. Assemblies serving as hosts allow application as selective receptors, confined reaction environments and more. Recently, the field has made big steps forward by implementing dedicated functionality, e.g. catalytic centres or photoswitches to allow stimuli control. Besides incorporation in homoleptic systems, composed of one type of ligand, desire arose to include more than one function within the same assembly. Inspiration comes from natural enzymes that congregate, for example, a substrate recognition site, an allosteric regulator element and a reaction centre. Combining several functionalities without creating statistical mixtures, however, requires a toolbox of sophisticated assembly strategies. This review showcases the implementation of function into self-assembled cages and devises strategies to selectively form heteroleptic structures. We discuss first examples resulting from a combination of both principles, namely multicomponent multifunctional host-guest complexes, and their potential in application in areas such as sensing, catalysis, and photo-redox systems.

Integrative Assembly of Heteroleptic Tetrahedra Controlled by Backbone Steric Bulk

A bent fluorenone-based dipyridyl ligand LA reacts with PdII cations to a solvent-dependent dynamic library of [PdnL2n] assemblies, constituted by a [Pd3LA6] ring and a [Pd4LA8] tetrahedron as major components, and a [Pd6LA12] octahedron as minor component. Introduction of backbone steric hindrance in ligand LB allows exclusive formation of the [Pd6LB12] octahedron. Combining equimolar amounts of both ligands results in integrative self-sorting to give an unprecedented [Pd4LA4LB4] heteroleptic tetrahedron. Key to the non-statistical assembly outcome is exploiting the structural peculiarity of the [Pd4L8] tetrahedral topology, where the four lean ligands occupy two doubly bridged edges and the bulky ligands span the four remaining, singly bridged edges. Hence, the system finds a compromise between the entropic drive to form an assembly smaller than the octahedron and the enthalpic prohibition of pairing two bulky ligands on the same edge of the triangular ring. The emission of luminescent LA is maintained in both homoleptic [Pd3LA6] and heteroleptic [Pd4LA4LB4].

Supramolecular Interaction of Molecular Cage and β-Galactosidase: Application in Enzymatic Inhibition, Drug Delivery and Antimicrobial Activity

Enzyme inhibitors play a crucial role in diagnosis of a wide spectrum of diseases related to bacterial infections. We report here the effect of a water-soluble self-assembled Pd^II ₈ molecular cage towards β-galactosidase enzyme activity. The molecular cage is composed of a tetrapyridyl donor (L) and cis-[(en)Pd(NO₃ )₂ ] (en=ethane-1,2-diamine) acceptor and it has a hydrophobic internal cavity. We have observed that the acceptor moiety mainly possesses the ability to inactivate the β-galactosidase enzyme activity. Kinetic investigation revealed the mixed mode of inhibition. This inhibition strategy was extended to control the growth of methicillin-resistant Staphylococcus aureus. The internalization of the Pd(II) cage inside the bacteria was confirmed when bacterial solutions were incubated with curcumin loaded cage. The intrinsic green fluorescence of curcumin made the bacteria glow when put under an optical microscope. Furthermore, this curcumin loaded molecular cage shows an enhanced antibacterial activity. Thus, Pd^II ₈ molecular cage is quite attractive due to its dual role as enzyme inhibitor and drug carrier.

Selective aldehyde reductions in neutral water catalysed by encapsulation in a supramolecular cage

The enhancement of reactivity inside supramolecular coordination cages has many analogies to the mode of action of enzymes, and continues to inspire the design of new catalysts for a range of reactions. However, despite being a near-ubiquitous class of reactions in organic chemistry, enhancement of the reduction of carbonyls to their corresponding alcohols remains very much underexplored in supramolecular coordination cages. Herein, we show that encapsulation of small aromatic aldehydes inside a supramolecular coordination cage allows the reduction of these aldehydes with the mild reducing agent sodium cyanoborohydride to proceed with high selectivity (ketones and esters are not reduced) and in good yields. In the absence of the cage, low pH conditions are essential for any appreciable conversion of the aldehydes to the alcohols. In contrast, the specific microenvironment inside the cage allows this reaction to proceed in bulk solution that is pH-neutral, or even basic. We propose that the cage acts to stabilise the protonated oxocarbenium ion reaction intermediates (enhancing aldehyde reactivity) whilst simultaneously favouring the encapsulation and reduction of smaller aldehydes (which fit more easily inside the cage). Such dual action (enhancement of reactivity and size-selectivity) is reminiscent of the mode of operation of natural enzymes and highlights the tremendous promise of cage architectures as selective catalysts.

Multi-stimuli Control over Assembly and Guest Binding in Metallo-supramolecular Hosts Based on Dithienylethene Photoswitches

It is difficult to assemble multi-component metallo-supramolecular architectures in a non-statistical fashion, which limits their development toward functional materials. Herein, we report a system of interconverting bowls and cages that are able to respond to various selective stimuli (light, ligands, anions), based on the self-assembly of a photochromic dithienylethene (DTE) ligand, L^a, with Pd^II cations. By combining the concept of “coordination sphere engineering”, relying on bulky quinoline donors, with reversible photoswitching between the ligand’s open (o-L^a) and closed (c-L^a) forms, a [Pd₂(o-L^a)₄] cage (o-C) and a [Pd₂(c-L^a)₃] bowl (c-B) were obtained, respectively. This structural rearrangement modulates the system’s guest uptake capabilities. Among three bis-sulfonate guests (G1, G2, and G3), the cage can encapsulate only the smallest (G1), while the bowl binds all of them. Bowl c-B was further used to synthesize a series of heteroleptic cages, [Pd₂L^A₃L^B], representing a motif never reported before. Additional ligands (L^c-f), with short or long arms, tune the cavity size, thus enabling or preventing guest uptake. Addition of Br^–/Ag⁺ makes it possible to change the overall charge, again triggering guest uptake and release, as well as fourth ligand de-/recomplexation. In combination, site-selective introduction of functionality and application of external stimuli lead to an intricate system of hosts with different guest preferences. A high degree of complexity is achieved through cooperativity between only a few components.

Identification of a Heteroleptic Pd6L6L'6 Coordination Cage by Screening of a Virtual Combinatorial Library

The design of structurally defined heteroleptic coordination cages is a challenging task, and only few examples are known to date. Here we describe a selection approach that allowed the identification of a novel hexanuclear Pd cage containing two types of dipyridyl ligands. A virtual combinatorial library of [Pd_nL_2n](BF₄)_2n complexes was prepared by mixing six different dipyridyl ligands with substoichiometric amounts of [Pd(CH₃CN)₄](BF₄)₂. Analysis of the equilibrated reaction mixture revealed the preferential formation of a heteroleptic [Pd₆L₆L'₆](BF₄)₁₂ assembly. The complex was prepared on a preparative scale by a targeted synthesis, and its structure was elucidated by single-crystal X-ray diffraction. It features an unprecedented trigonal-antiprismatic cage structure with two triangular Pd₃L₃ macrocycles bridged by six L' ligands. A related but significantly larger [Pd₆L₆L'₆](BF₄)₁₂ cage was obtained by using metalloligands instead of organic dipyridyl ligands.

Design and Applications of Water-Soluble Coordination Cages

Compartmentalization of the aqueous space within a cell is necessary for life. In similar fashion to the nanometer-scale compartments in living systems, synthetic water-soluble coordination cages (WSCCs) can isolate guest molecules and host chemical transformations. Such cages thus show promise in biological, medical, environmental, and industrial domains. This review highlights examples of three-dimensional synthetic WSCCs, offering perspectives so as to enhance their design and applications. Strategies are presented that address key challenges for the preparation of coordination cages that are soluble and stable in water. The peculiarities of guest binding in aqueous media are examined, highlighting amplified binding in water, changing guest properties, and the recognition of specific molecular targets. The properties of WSCC hosts associated with biomedical applications, and their use as vessels to carry out chemical reactions in water, are also presented. These examples sketch a blueprint for the preparation of new metal-organic containers for use in aqueous solution, as well as guidelines for the engineering of new applications in water.