Metal-Free, Multicomponent Synthesis of Pyrrole-Based π-Conjugated Polymers from Imines, Acid Chlorides, and Alkynes

Unlocking the potential of azide-phosphine Staudinger reaction for the synthesis of poly(arylene iminophosphorane)s and materials therefrom

Iminophosphoranes with the general formula (R3P═NR') have great potential in synthetic chemistry as valuable precursors/intermediates in organic synthesis or as building blocks for various organic compounds. However, the synthetic approaches and conditions to prepare iminophosphoranes are still poorly understood, limiting the utility of this chemistry for organic materials. In this article, a simple and efficient synthesis of previously unattainable poly(arylene iminophosphoranes) is reported. The azide-phosphine Staudinger polycondensation is used, and the reaction conditions are carefully studied, including consideration of light and air, the influence of solvent and temperature, and investigation of the electronic and steric effects of multiazides. The newly defined reaction conditions appear to be highly versatile, allowing the use of both electron-rich and electron-deficient arylazides for reaction with phosphines to synthesize a library of poly(arylene iminophosphorane) networks that exhibit exceptional thermal and oxidative stability. Interestingly, despite the ylidic-form of the iminophosphorane linkage as shown by theoretical calculations, these newly developed poly(arylene-iminophosphorane) networks exhibit semiconducting properties, such as absorption band edges up to 800 nm and optical band gaps in the range of 1.70 to 2.40 eV. Finally, we demonstrate the broad applicability of these polymers by processing them into glassy films, creating foam-like structures and synthesizing metallo-polymer hybrids.

Polypyrrole Derivatives: Preparation, Properties and Application

Polypyrrole (PPy) has attracted widespread attention due to its excellent environmental stability, high conductivity, simple synthesis, good biocompatibility, and reversible redox properties. PPy derivatives not only inherit the advantages of polypyrrole, but also have some unique properties. The side and N-site substitution of PPy can not only yield polymers with good solubility, but it also endows polymers with special functionalities by controlling the introduced functional groups. The performance of copolymers can also be adjusted by the type of monomer or polymerization ratio. In this review, an overview of the different types, main preparation methods, and the application prospects of PPy derivatives reported to date are summarized and presented. The current challenges and future opportunities in this research area are also prospected.

Access to 2,4-Disubstituted Pyrrole-Based Polymer with Long-Wavelength and Stimuli-Responsive Properties via Copper-Catalyzed [3+2] Polycycloaddition

Pyrrole-based polymers (PBPs), a type of fascinating functional polymers, play a crucial role in materials science. However, efficient synthetic strategies of PBPs with diverse structures are mainly focused on conjugated polypyrroles and still remain challenging. Herein, an atom and step economy protocol is described to access various 2,4-disubstituted PBPs by in situ formation of pyrrole core structure via copper-catalyzed [3+2] polycycloaddition of dialkynones and diisocyanoacetates. A series of PBPs is prepared with high molecular weight (Mw up to 18 200 Da) and moderate to good yield (up to 87%), which possesses a fluorescent emission located in the green to yellow light region. Blending the PBPs with polyvinyl alcohol, the stretchable composite films exhibit a significant strengthening of the mechanical properties (tensile stress up to 59 MPa, elongation at break >400%) and an unprecedented stress-responsive luminescence enhancement that over fourfold fluorescent emission intensity is maintained upon stretching up to 100%. On the basis of computational studies, the unique photophysical and mechanical properties are attributed to the substitution of carbonyl chromophores on the pyrrole unit.

Efficient Conversion of Inert Nitriles to Multifunctional Poly(5-amino-1,2,3-triazole)s via Regioselective Click Polymerization with Azide Monomers under Ambient Conditions

Nitrile compounds are abundant, stable, cheap, and readily available natural and chemical industrial sources. However, the efficient conversion of nitrile monomers to functional polymers is mostly limited due to their inert reactivity, and developing efficient polymerizations based on nitrile monomers under very mild conditions is still a big challenge. In this work, a facile and powerful base-catalyzed acetonitrile-azide click polymerization was successfully established under ambient conditions. This polymerization also enjoys the merits of short reaction time (15 min), 100% atom economy, transition-metal-free catalyst system, and regioselectivity. A series of poly(5-amino-1,2,3-triazole)s (PATAs) with high weight-average molecular weights (Mw, up to 204,000) were produced in excellent yields (up to 99%). The PATAs containing tetraphenylethene (TPE) moieties exhibit unique aggregation-induced emission (AIE) characteristics, which could be used to sensitively detect Fe(III) ions with a low limit of detection (1.205 × 10-7 M) and to specifically image lysosomes of living cells. Notably, PATAs could be facilely post-modified due to their containing primary amino groups in the polymer chains even through a one-pot tandem reaction. Thus, this work not only establishes a new powerful click polymerization to convert stable nitriles but also generates a series of PATAs with versatile properties for diverse applications.

A Photoactivatable Luminescent Motif through Ring-Flipping Isomerization for Multiple Photopatterning

Photoactivatable luminescent materials have garnered enormous attention in the field of intelligent responsive materials, yet their design and applications remain challenging due to the limited variety of photoactivatable motifs. In the work described herein, we discovered a new photoactivatable luminescent motif that underwent ring-flipping isomerization under UV irradiation. The emission of this motif exhibited a rapid transformation from dark yellow to bright green, accompanied by a significant enhancement of quantum yield from 1.9% to 34.2%. Experimental and theoretical studies revealed that the effective intramolecular motion (EIM) was crucial to the distinct luminescence performance between two isomers. In addition, polymers containing this motif were achieved through a one-pot alkyne polymerization, exhibiting both photofluorochromic and photo-cross-linking properties. Furthermore, multiple types of photopatterning, including luminescent encryption, fluorescent grayscale imaging, and high-resolution photolithographic patterns, were realized. This work developed a new photoactivatable luminescent motif and demonstrated its potential applications in both small molecules and macromolecules, which will help in the future design of photoactivatable luminescent materials.

Superhydrophobic Coatings Composed of Multifunctional Polymers Synthesized Using Successive Modification of Dihydropyrimidin-2(1H)-thione

Polymer synthesis via multicomponent reactions (MCRs) has opened avenues in polymer chemistry and led to the development of various types of functional polymers. Herein, we developed a strategy to prepare multifunctional polymers via the successive modification of dihydropyrimidin-2(1H)-thione (DHPMT), which can be generated by the tricomponent Biginelli reaction. Four hydrophobic polymers were efficiently prepared by using DHPMT derivatives. These polymers can be dip-coated onto the oxidized copper mesh to obtain superhydrophobic meshes because of the strong attractive forces between the DHPMT derivatives and Cu(II). The optimized mesh has self-cleaning properties and outstanding stability in various liquid environments; it has also been successfully applied for oil/water separation with high separation efficiency and good durability. These results demonstrate that successive modification of DHPMT is a promising method for fabricating multifunctional polymers, which may have applications in polymer chemistry and materials science.

Poly(vinyl alcohol) Modified via the Hantzsch Reaction for Biosafe Antioxidant Self-Healing Hydrogel

Efficient routes for the preparation of functional self-healing hydrogels from functional polymers are needed. In this study, we developed a strategy to effectively produce a vanillin-modified poly(vinyl alcohol) (PVA-vanillin) through the Hantzsch reaction. This polymer was cross-linked with a phenylboronic acid-containing polymer (PB) that was also prepared using the Hantzsch reaction to fabricate a hydrogel through borate ester linkages under mild conditions (25 °C, pH ∼ 7.4). This hydrogel had excellent antioxidant abilities due to the 1,4-dihydropyridine (DHP) rings and the vanillin moieties in the hydrogel structures; it was also self-healable and injectable owing to the dynamic borate ester linkages. Furthermore, the antioxidant self-healing hydrogel had low cytotoxicity and exhibited favorable safety in animal experiments, indicating its potential as a safe implantable cell or drug carrier. This study developed a method for preparing functional polymers and related self-healing hydrogels in a facile manner; it demonstrated the value of the Hantzsch reaction in exploiting antioxidant self-healing hydrogels for biomedical applications, which may provide insight into the design of other functional self-healing hydrogels through different multicomponent reactions.

Catalyst-free synthesis of diverse fluorescent polyoxadiazoles for the facile formation and morphology visualization of microporous films and cell imaging

The development of facile polymerizations toward functional heterocyclic polymers is of great significance for chemistry and materials science. As an important class of heterocyclic polymers, polyoxadiazoles (PODs) have found applications in various fields. However, the synthetic difficulties of PODs greatly restrict their structural diversity and property investigation. Herein, we report a series of catalyst-free multicomponent polymerizations (MCPs) that can facilely synthesize functional PODs with well-defined and diversified topological structures from commercially available or readily accessible aldehydes, carboxylic acids, secondary amines, and (N-isocyanimino)triphenylphosphorane at room temperature. Unlike conventional Ugi polycondensations, the present Ugi-type MCPs can in situ generate oxadiazole moieties in polymer backbones. The obtained PODs possess good solubility, high thermal and morphological stability, and excellent film-forming ability. The introduction of aggregation-induced emission (AIE) moieties together with the inherent structural features of PODs endow these polymers with multiple functionalities. The AIE-active linear PODs can form fluorescent microporous films with stable and ordered structures based on the simple breath figure patterning method, and the self-assembly morphologies can be directly visualized by fluorescence microscopy in a high-contrast and sensitive manner. Moreover, both the linear and hyperbranched AIE-active PODs possess excellent biocompatibility, good lysosome specificity, and excellent photobleaching resistance, which enable them to serve as promising lysosome-specific fluorescent probes in biological imaging.

Stepping Further from Coupling Tools: Development of Functional Polymers via the Biginelli Reaction

Multicomponent reactions (MCRs) have been used to prepare polymers with appealing functions. The Biginelli reaction, one of the oldest and most famous MCRs, has sparked new scientific discoveries in polymer chemistry since 2013. Recent years have seen the Biginelli reaction stepping further from simple coupling tools; for example, the functions of the Biginelli product 3,4-dihydropyrimidin-2(1H)-(thi)ones (DHPM(T)) have been gradually exploited to develop new functional polymers. In this mini-review, we mainly summarize the recent progress of using the Biginelli reaction to identify polymers for biomedical applications. These polymers have been documented as antioxidants, anticancer agents, and bio-imaging probes. Moreover, we also provide a brief introduction to some emerging applications of the Biginelli reaction in materials and polymer science. Finally, we present our perspectives for the further development of the Biginelli reaction in polymer chemistry.

Introducing the aza-Michael addition reaction between acrylate and dihydropyrimidin-2(1H)-thione into polymer chemistry

The aza-Michael addition reaction between dihydropyrimidin-2(1H)-thione and acrylate has been used to fabricate new polymers through different synthesis routes.

Three-Component Dynamic Covalent Chemistry: From Janus Small Molecules to Functional Polymers

A new multicomponent reaction involving 2-hydroxybenzaldehyde, amine, and 2-mercaptobenzaldehyde (HAM reaction) has been developed and applied to multicomponent polymerization and controlled radical polymerization for the construction of random and block copolymers. This chemistry features mild reaction conditions, high yield, simple isolation, and water as the only byproduct. With the advantages of the distinct nucleophilicity of thiol and hydroxyl groups, the chemistry could be used for stepwise labeling and modifications on primary amines. The Janus chemical joint formed from this reaction exhibits degradability in buffers and generates the corresponding starting reagents, allowing amine release. Interestingly, the chemical joint exhibits thermally activated reversibility with water as the catalyst. This multicomponent dynamic covalent feature has been applied to the metamorphosis of random and block copolymers, generating polymers with diverse architectures. This chemistry is expected to be broadly applicable to synthetic polymer chemistry and materials science.

Multicomponent formation route to a new class of oxygen-based 1,3-dipoles and the modular synthesis of furans

A new class of phosphorus-containing 1,3-dipoles can be generated by the multicomponent reaction of aldehydes, acid chlorides and the phosphonite PhP(catechyl). These 1,3-dipoles are formally cyclic tautomers of simple Wittig-type ylides, where the angle strain and moderate nucleophilicity in the catechyl-phosphonite favor their cyclization and also direct 1,3-dipolar cycloaddition to afford single regioisomers of substituted products. Coupling the generation of the dipoles with 1,3-dipolar cycloaddition offers a unique, modular route to furans from combinations of available aldehydes, acid chlorides and alkynes with independent control of all four substituents.

Multicomponent Spiropolymerization of Diisocyanides, Diethyl Acetylenedicarboxylate, and Halogenated Quinones

Multicomponent spiropolymerization (MCSP) provides an efficient synthetic tool for the construction of spiropolymers based on nonspiro monomers. In this study, a method of MCSP using diisocyanides 1, diethyl acetylenedicarboxylate 2, and halogenated quinones 3 is developed for the in situ construction of bis-spiropolymers with high molecular weights (M_w up to 29 200) and good yields (up to 87.7%) under mild reaction conditions. The structure of the obtained bis-spiropolymers is confirmed by gel permeation chromatography, Fourier transform infrared spectroscopy, and nuclear magnetic resonance analysis. Halogenated bis-spiropolymers show good thermal stability, good solubility, and film-forming ability. The photosensitizer rhodamine B is used as a doping agent to induce the photodegradation of the polymer P1a3c into small-molecule segments, which results in the slow release of halogenated spiro-groups under irradiation with simulated sunlight. This finding reveals that P1a3c has the potential to be applied in pesticides. Therefore, this MCSP is a novel method for preparing halogen-containing bis-spiropolymers, which accelerates the development of multifunctional polymer materials.

Multicomponent Polymerization for π-Conjugated Polymers

Structurally complex π-conjugated polymers hold great promise as key components in sensor and electronic devices; however, their syntheses have not been a trivial task. From a synthetic efficiency perspective, it would be more attractive to access these materials using convenient and efficient methods from simple building blocks. One such synthetic tool, multicomponent polymerization, can accommodate modularity and provide highly efficient syntheses. This feature article outlines several multicomponent polymerization strategies for the synthesis of various π-conjugated polymers, which are classified based upon how the monomers are aligned during polymerization. Additionally, the challenges and outlooks of this field are highlighted and discussed.

Catalyst-Free Multicomponent Cyclopolymerizations of Diisocyanides, Activated Alkynes, and 1,4-Dibromo-2,3-Butanedione: a Facile Strategy toward Functional Polyiminofurans Containing Bromomethyl Groups

Polymers containing iminofuran (PIFs) are rarely reported due to the lack of simple and effective synthesis methods. In this work, a novel multicomponent cyclopolymerization (MCCP) of diisocyanides, activated alkynes, and 1,4-dibromo-2,3-butanedione using catalyst-free one-pot reactions under mild conditions to prepare PIFs containing bromomethyl groups is reported. PIFs with good solubility and thermal stability are obtained with high M_w s (up to 19 600) and good yields (up to 89.5%) under optimized polymerization conditions. The structure of the PIFs is characterized by nuclear magnetic resonance, Fourier transform infrared spectroscopy, and gel permeation chromatography. The photophysical properties indicate that polymers P1a2b3 and P1c2b3 have cluster-triggered emission characteristics. Thin films made from PIFs quickly degrade under UV irradiation. Moreover, the obtained polymers are decorated with bromomethyl and carboxylate groups in the side chain, which can be postfunctionalized to prepare multifunctional materials, such as star branched polymers and biomedical carrier materials. Thus, this work not only enriches the field of polymerization based on isocyanates and activated alkynes but also provides a facile strategy toward functional iminofuran polymers.

Pyrrole-Containing Semiconducting Materials: Synthesis and Applications in Organic Photovoltaics and Organic Field-Effect Transistors

Organic semiconducting materials derived from π-electron-rich pyrroles have garnered attention in recent years for the development of organic semiconductors. Although pyrrole is the most electron-rich five-membered heteroaromatic ring, it has found few applications in organic photovoltaics and organic field-effect transistors due to synthetic challenges and instability. However, computational modeling assisted screening processes have indicated that relatively stable materials containing pyrrolic units can be synthesized without compromising their inherent electron-donating properties. In this work, we provide a complete, up-to-date review of pyrrole-containing semiconducting materials used for organic photovoltaics and organic field-effect transistors and highlight recent advances in the synthesis of these materials.

A new soft-matter material with old chemistry: Passerini multicomponent polymerization-induced assembly of AIE-active double-helical polymers with rapid visible-light degradability

Mimicking the superstructures and functions of natural chiral materials is beneficial to understand specific biological activities in living organisms and broaden applications in the fields of chemistry and materials sciences. However, it is still a great challenge to construct water-soluble, double-helical polymers with multiple responsiveness. Herein, we report for the first time a straightforward, general strategy to address this issue by taking advantage of Passerini multicomponent polymerization-induced assembly (PMPIA). The polymerization-induced generation of supramolecular interactions in chiral α-acyloxy amides drives the assembly of polymers and improves their stability in various solvents. This double-helical polymer is sensitive to metal ions, temperature, pH, and solvents, making both the superstructure and the AIE effect reversibly adjustable. Meanwhile, the hydrogen-bonding-assisted cyclization of photolabile α-acyloxy amides accelerates the degradation of helical polymers under visible-light irradiation. It is anticipated that this novel PMPIA strategy opens new horizons to inspire the design of advanced chiral/helical polymers with multiple functions.

A Versatile Approach to Dynamic Amide Bond Formation with Imine Nucleophiles

Dynamic covalent chemistry has rapidly become an important approach to access supramolecular structures. While the products generated in these reactions are held together by covalent bonds, the reversible nature of the transformations can limit the utility of many these systems in creating robust materials. We describe herein a method to form stable and commonly employed amide bonds by exploiting the reversible coupling of imines and acyl chlorides. The reaction employs easily accessible reagents, is dynamic under ambient conditions, without catalysts, and can be trapped with simple hydrolysis. This offers an approach to create broad families of amide products under thermodynamic control, including the selective formation of amide macrocycles or polymers.

Nanofiltration Membranes with Metal Cation-Immobilized Aminophosphonate Networks for Efficient Heavy Metal Ion Removal and Organic Dye Degradation

Modifications to the surface of polymeric membranes to integrate supplemental properties like surface charge or catalytic activity are the cornerstone of the membrane process advancement to effectuate improvements in functionality and selectivity. Herein, a new approach is demonstrated to construct nanofiltration membranes with a metal-organic coordinated selective layer. Polyethylenimine (PEI) was integrated with phosphite linkages to form a characteristic aminophosphonate ester polymer based on the Kabachnik-Fields reaction, and a thin polymer layer was deposited on an ultrafiltration (UF) membrane to form the aminophosphonate networks surface-modified membranes. The aminophosphonate polymer interlayer facilitated the immobilization of metal cation moieties through the strong coordinative chemical bonding with the amino groups and phosphite moieties. Typically, the incorporated Fe³⁺ strengthened the membranes' electropositivity leading to excellent heavy metal ion removal (>98%) and efficient organic dye separation (>99.8%). Meanwhile, the strategy also enabled the embedment of a photocatalytic layer comprising nanoneedle-like α-FeOOH that endowed the membrane with high photo-Fenton activity for organic dye mineralization. Subsequently, the α-FeOOH-embedded membrane afforded the photocatalytic self-cleaning potentiality for organic fouling mitigation. This contribution underscores the prospect of advancing the integration of metal-specific functionalities and the membrane process for advanced membrane technologies in water treatment.

Direct Construction of Acid-Responsive Poly(indolone)s through Multicomponent Tandem Polymerizations

Multicomponent polymerizations (MCPs) as a burgeoning field in polymer chemistry has proved to be a powerful and popular tool for the synthesis of functional polymer materials with diverse and complex structures. To explore the general applicability of MCPs and enrich the product structures of MCPs, multicomponent tandem polymerizations (MCTPs) with great synthetic simplicity and efficiency were pursued. In this work, MCTPs of N-(2-iodophenyl)-3-phenyl-N-tosylpropiolamide, aromatic terminal alkynes, and diamines were explored through combining Sonogashira coupling and Michael addition reaction in a one-pot procedure. The MCTPs could proceed efficiently and conveniently under mild conditions with Pd(PPh₃)₂Cl₂, CuI, and i-Pr₂NEt, affording 12 poly(indolone)s with unique structures and high M_ws (up to 30400 g/mol) in high yields (up to 97%). The poly(indolone)s possess a unique acid-triggered fluorescence "turn-on" response which could realize specific detection of CF₃SO₃H from other inorganic and organic acids through a rapid acid-catalyzed reaction from enamine to ketone.

PEG-conjugated pyrrole-based polymers: one-pot multicomponent synthesis and self-assembly into soft nanoparticles for drug delivery

A simple one-pot methodology provides easy access to amphiphilic PEG–pyrrole backbone polymers, which self-assemble into soft nanoparticles enabling efficient drug loading/sustained release and can be detected inside cells.

Materials Functionalization with Multicomponent Reactions: State of the Art

The emergence of neoteric synthetic routes for materials functionalization is an interesting phenomenon in materials chemistry. In particular, the union of materials chemistry with multicomponent reactions (MCRs) opens a new avenue leading to the realm of highly innovative functionalized architectures with unique features. MCRs have recently been recognized as considerable part of the synthetic chemist's toolbox due to their great efficiency, inherent molecular diversity, atom and pot economy along with operational simplicity. Also, MCRs can improve E-factor and mass intensity as important green chemistry metrics. By rational tuning of the materials, as well as the MCRs, wide ranges of functionalized materials can be produced with tailorable properties that can play important roles in the plethora of applications. To date, there has not reported any exclusive review of a materials functionalization with MCRs. This critical review highlights the state-of-the-art on the one-pot functionalization of carbonaceous and siliceous materials, polysaccharides, proteins, enzymes, synthetic polymers, etc., via diverse kind of MCRs like Ugi, Passerini, Petasis, Khabachnik-Fields, Biginelli, and MALI reactions through covalent or noncovalent manners. Besides the complementary discussion of synthetic routes, superior properties and detailed applicability of each functionalized material in modern technologies are discussed. Our outlook also emphasizes future strategies for this unprecedented area and their use as materials for industrial implementation. With no doubt, MCRs-functionalization of materials bridges the gap between materials science domain and applied chemistry.