Transition-Metal-like Behavior of Main Group Elements: Ligand Exchange at a Phosphinidene

An Azide-Free Synthesis of Metallodiazomethanes Using Nitrous Oxide

Diazo compounds are valuable reagents in synthesis but usually require the use of potentially explosive or toxic starting materials. Here, we report the synthesis and isolation of alkali metal diazomethanides by the reaction of metalated ylides with nitrous oxide, resulting in a formal exchange of the phosphine ligand by dinitrogen. The reaction proceeds through a Wittig-like mechanism via a [3 + 2] cycloaddition of N2O across the ylide bond with release of phosphine oxide. The metalated diazomethanes exhibit an increased thermal stability due to the stronger binding of N2 compared to neutral diazomethanes. This is reflected in short C-N distances and red-shifted N-N vibrations and enables versatile applications such as for the preparation of transition metal diazomethanide complexes and the synthesis of 1,2,3-triazoles from nitriles, diazoacetates from carbon dioxide, or alkynes from aldehydes.

A carbene-stabilized diphosphorus: a triple-bonded diphosphorus (P[triple bond, length as m-dash]P) and a bis(phosphinidene) (P-P) transfer agent

The reaction of the N,N-diisopropyl bromoiminium salt with excess sodium phosphaethynolate (NaPCO) affords a diphospha-urea 2. Under blue light irradiation (450 nm), carbon monoxide is liberated affording the bis(carbene)P2 adduct 3. Photolysis of a benzene solution of 3 at 365 nm gives rise to the carbene dimer, namely the 1,2-bis(diisopropylamino)ethylene as a cis/trans mixture, along with white and red phosphorus. Under the same experimental conditions, but in the presence of excess 2,3-dimethyl-1,3-butadiene, the classical double Diels-Alder adduct of the triple-bonded diphosphorus P[triple bond, length as m-dash]P was obtained along with the bis(phospholene) formally resulting from a double [4 + 1] reaction of the diene with the bis(phosphinidene) form of P2. A stepwise carbene-carbene exchange reaction also occurs between the monosubstituted aminocarbene of 3 and a cyclic (alkyl)(amino)carbene, possibly involving the transient formation of a diphosphorus analogue of a diazo compound.

The lithium effect in ketenyl anion chemistry

Ketenyl lithium compounds of type [RC(Li)CO] (with R = Ph2P(E), E = O, S, Se) were found to exhibit lower thermal stabilities than their potassium analogues due to the stronger coordination of the oxygen of the ketene moiety to the harder metal cation, resulting in a more pronounced ynolate character. Using additional ligands allows manipulation of the O-Li interaction, thereby influencing the stability and reactivity of the ketenyl anions.

A Phosphanyl Phosphagermene and its Reactivity

Reaction of a nucleophilic germylene Ge[CH(SiMe3)2]2 with the phosphanyl phosphaketene [{(H2C)(NDipp)}2P]PCO induces decarbonylation to form a phosphanyl phosphagermene [{(H2C)(NDipp)}2P]P=Ge[CH(SiMe3)2]2 (1; Dipp=2,6-diisopropyl-phenyl). Addition of CO2 or MeCN to 1 results in [3+2]-cycloaddition reactions to afford five-membered heterocycles. This mode of reactivity is reminiscent of that observed for frustrated Lewis pairs, with the pendant phosphanyl group acting as a base and the germanium center as a Lewis acid. Contrastingly, 1,2-addition across the P=Ge bond was observed when using ammonia, small primary amines (NH2 nP), or metal complexes (e. g. Au(PPh3)Cl and ZnEt2). These latter reactions allow for the one-step synthesis of metal phosphide complexes.

Modulating Hydrogen Shuttling in Ammonia by Neutral and Cationic Boron-Containing Frustrated Lewis Pairs (FLPs)

Xanthene-backbone FLPs featuring secondary borane functions -B(ArX)H (where ArX=C6F5 (ArF) or C6Cl5 (ArCl)) have been targeted through reactions of the dihydroboranes Me2S ⋅ BArXH2 with [4,5-xanth(PR2)Li]2 (R=Ph, iPr), and investigated in the synthesis of related cationic systems via hydride abstraction. The reactivity of these systems (both cationic and charge neutral) with ammonia have been probed, with a view to probing the potential for proton shuttling via N-H bond 'activation.' We find that in the case of four-coordinate boron systems (cationic or change neutral), the N-H linkage remains intact, supported by a NH⋅⋅⋅P hydrogen bond which is worth up to 17 kcal mol-1 thermodynamically, and enabled by planarization of the flexible xanthene scaffold. For cationic three coordinate systems, N-to-P proton transfer is viable, driven by the ability of the boron centre to stabilise the [NH2]- conjugate base through N-to-B π bonding. This proton transfer can be shown to be reversible in the presence of excess ammonia, depending on the nature of the B-bound ArX group. It is viable in the case of C6F5 substituents, but is prevented by the more sterically encumbering and secondary donor-stabilising capabilities of the C6Cl5 substituent.

Molecular-strain induced phosphinidene reactivity of a phosphanorcaradiene

Phosphanorcaradienes are an appealing class of phosphorus compounds that can serve as synthons of transient phosphinidenes. However, the synthesis of such species is a formidable task owing to their intrinsic high reactivity. Herein we report straightforward synthesis, characterization and reactivity studies of a phosphanorcaradiene, in which one of the benzene rings in the flanking fluorenyl substituents is intramolecularly dearomatized through attachment to the phosphorus atom. It is facilely obtained by the reduction of phosphorus(III) dichloride precursor with potassium graphite. Despite being thermally robust, it acts as a synthetic equivalent of a transient phosphinidene. It reacts with trimethylphosphine and isonitrile to yield phosphanylidene-phosphorane and 1-phospha-3-azaallene, respectively. When it is treated with one and two molar equivalents of azide, iminophosphane and bis(imino)phosphane are isolated, respectively. Moreover, it is capable of activating ethylene and alkyne to afford [1 + 2] cycloaddition products, as well as oxidative cleavage of Si-H and N-H bonds to yield secondary phosphines. All the reactions proceed smoothly at room temperature without the presence of transition metals. The driving force for these reactions is most likely the high ring-constraint of the three-membered PC2 ring and recovery of the aromaticity of the benzene ring.

Ligand Exchange at Carbon: Synthetic Entry to Elusive Species and Versatile Reagents

How different is carbon compared to other elements in the periodic table? Can carbon compounds be regarded as coordination complexes with carbon as the central element undergoing a facile exchange of its ligands? Although carbon clearly plays a special role among the elements of the periodic table, recent studies have drawn parallels between the bonding situation and the reactivity of carbon compounds to transition metal complexes. This Perspective summarizes recent reports about ylidic and zwitterionic compounds that were shown to exhibit ambiguous bonding situations that can be interpreted as donor-acceptor interactions similar to the bond between a metal and a neutral ligand. Based on this conception, ligand exchange reactions prototypical of transition metal complexes were realized at carbon atoms, enabling new synthetic strategies for the synthesis of reactive species and building blocks. In particular, the exchange of N2, CO, and phosphine ligands led to the development of a mild method for accessing new compounds and reagents with unusual properties, such as vinylidene ketenes or stable ketenyl anions, that open up a diverse but still poorly explored follow-up chemistry.

Recent advances in the chemistry of isolable carbene analogues with group 13-15 elements

Carbenes (R2C:), compounds with a divalent carbon atom containing only six valence shell electrons, have evolved into a broader class with the replacement of the carbene carbon or the RC moiety with main group elements, leading to the creation of main group carbene analogues. These analogues, mirroring the electronic structure of carbenes (a lone pair of electrons and an empty orbital), demonstrate unique reactivity. Over the last three decades, this area has seen substantial advancements, paralleling the innovations in carbene chemistry. Recent studies have revealed a spectrum of unique carbene analogues, such as monocoordinate aluminylenes, nitrenes, and bismuthinidenes, notable for their extraordinary properties and diverse reactivity, offering promising applications in small molecule activation. This review delves into the isolable main group carbene analogues that are in the forefront from 2010 and beyond, spanning elements from group 13 (B, Al, Ga, In, and Tl), group 14 (Si, Ge, Sn, and Pb) and group 15 (N, P, As, Sb, and Bi). Specifically, this review focuses on the potential amphiphilic species that possess both lone pairs of electrons and vacant orbitals. We detail their comprehensive synthesis and stabilization strategies, outlining the reactivity arising from their distinct structural characteristics.

Spectroscopic Identification of Trifluorosilylphosphinidene and Isomeric Phosphasilene and Silicon Trifluorophosphine Complex

The perfluorinated silylphosphinidene, F3SiP, in the triplet ground state is generated by the reaction of laser-ablated silicon atoms with PF3 in solid neon and argon matrices. The reactions proceed with the initial formation of a silicon trifluorophosphine complex, F3PSi, in the triplet ground state, and a more stable inserted phosphasilene, FPSiF2, in the singlet ground state upon deposition. The trifluorosilylphosphinidene was formed through F-migration reactions of FPSiF2 and F3PSi following a two-state mechanism under irradiation with visible light (λ = 470 nm) and full arc light (λ > 220 nm), respectively. High-level quantum-chemical methods support the identification of F3PSi, FPSiF2, and F3SiP by matrix-isolation IR spectroscopy.

Tetryliumylidene ions in synthesis and catalysis

Tetryliumylidene ions ([R-E:]+), recognised for their intriguing electronic properties, have attracted considerable interest. These positively charged species, with two vacant p-orbitals and a lone pair at the E(ii) centre (E = Si, Ge, Sn, Pb), can be viewed as the combination of tetrylenes (R2E:) and tetrylium ions ([R3E]+), which makes them potent Lewis ambiphiles. Such electronic features highlight the potential of tetryliumylidenes for single-site small molecule activation and transition metal-free catalysis. The effective utilisation of the electrophilicity and nucleophilicity of tetryliumylidenes is expected to stem from appropriate ligand choice. For most of the isolated tetryliumylidenes, electron donor- and/or kinetic stabilisation is necessary. This minireview highlights the developments in tetryliumylidene syntheses and the progress of research towards their reactivity and applications in catalytic reactions.

Isolation of an Anionic Dicarbene Embedded Sn2 P2 Cluster and Reversible CO2 Uptake

Decarbonylation of a cyclic bis-phosphaethynolatostannylene [(ADC)Sn(PCO)]2 based on an anionic dicarbene framework (ADC = PhC{N(Dipp)C}2 ; Dipp = 2,6-iPr2 C6 H3 ) under UV light results in the formation of a Sn2 P2 cluster compound [(ADC)SnP]2 as a green crystalline solid. The electronic structure of [(ADC)SnP]2 is analyzed by quantum-chemical calculations. At room temperature, [(ADC)SnP]2 reversibly binds with CO2 and forms [(ADC)2 {SnOC(O)P}SnP]. [(ADC)SnP]2 enables catalytic hydroboration of CO2 and reacts with elemental selenium and Fe2 (CO)9 to afford [(ADC)2 {Sn(Se)P2 }SnSe] and [(ADC)Sn{Fe(CO)4 }P]2 , respectively. All compounds are characterized by multinuclear NMR spectroscopy and their solid-state molecular structures are determined by single-crystal X-ray diffraction.

Gallaphosphene L(Cl)GaPGaL: A novel phosphinidene transfer reagent

Gallaphosphene L(Cl)GaPGaL 1 (L=HC[C(Me)N(Ar)]2 ; Ar=2,6-iPr2 C6 H3 ) reacts with N-heterocyclic carbenes R NHC (R NHC=[CMeN(R)]2 C; R=Me, iPr) to R NHC-coordinated phosphinidenes R NHC→PGa(Cl)L (R=Me 2 a, iPr 2 b) and with isonitriles RNC (R=iPr, Cy) to 1,3-phosphaazaallenes L(Cl)GaP=C=N-R (R=iPr 3 a, Cy 3 b), respectively. Quantum chemical calculations reveal that 2 a/2 b possess two localized lone pair of electrons, whereas 3 a/3 b only show one localized lone pair as was reported for gallaphosphene 1. 2 b reacts with 2.5 equivalents of a borane (THF ⋅ BH3 ) to the NHC-stabilized phosphinidene-borane complex [iPr NHC→P(BH2 )]2 (BH3 )3 4 with concomitant formation of LGa(H)Cl 5. 2-5 are characterized by heteronuclear (1 H, 13 C{1 H}, 31 P{1 H}) NMR and IR spectroscopy, elemental analysis, and single crystal X-ray diffraction (sc-XRD).

A crystalline aluminium-carbon-based ambiphile capable of activation and catalytic transfer of ammonia in non-aqueous media

Despite recent achievements in the field of frustrated Lewis pairs (FLPs) for small molecule activations, the reversible activation and catalytic transformations of N-H-activated ammonia remain a challenge. Here we report on a rare combination of an aluminium Lewis acid and a carbon Lewis base. A so-called hidden FLP consisting of a phosphorus ylide featuring an aluminium fragment in the ortho position of a phenyl ring scaffold is introduced. Although the formation of the Lewis acid/base adduct is observed in the solid state, which at first glance leads to formally quenched FLP reactivity, we show that the title compound readily reacts with non-aqueous ammonia thermoneutrally and splits the N-H bond reversibly at ambient temperature. In addition, NH3 transfer reactions mediated by a main-group catalyst are presented. This proof-of-principle study is expected to initiate further activities in utilizing N-H-activated ammonia as a readily available, atom-economical nitrogen source.

Phosphinidenes: Fundamental Properties and Reactivity

Phosphinidenes are heavy congeners of nitrenes that have been broadly used as in situ reagents in synthetic phosphorus chemistry and also serve as versatile ligands in coordination with transition metals. However, the detection of free phosphinidenes is largely challenged by their high reactivity and also the lack of suitable synthetic methods, rendering the knowledge about the fundamental properties of this class of low-valent phosphorus compounds limited. Recently, an increasing number of free phosphinidenes bearing prototype structural and bonding properties have been prepared for the first time, thus enabling the exploration of their distinct reactivity from the nitrene analogues. This Concept article will discuss the experimental approaches for the generation of the highly unstable phosphinidenes and highlight their distinct reactivity from the nitrogen analogues so as to stimuate future studies about their potential applications in phosphorus chemistry.

Photolysis of Phosphaketenyltetrylenes with a Carbazolyl Substituent

Phosphaketenes of divalent group 14 compounds can potentially serve as precursors for the synthesis of heavy multiple-bond systems. We have employed the dtbp Cbz substituent (dtbp Cbz=1,8-bis(3,5-ditertbutylphenyl)-3,6-ditertbutylcarbazolyl) to prepare such phosphaketenyltetrylenes [(dtbp Cbz)EPCO] (E=Ge, Sn, Pb). While the phosphaketenyltetrylenes are stable at ambient conditions, they can be readily decarbonylated photolytically. For the germylene and stannylene derivatives, dimeric diphosphene-type products [(dtbp Cbz)EP]2 (E=Ge, Sn) were obtained. In contrast, photolysis of the phosphaketenylplumbylene, via isomerisation of the [(dtbp Cbz)PbP] intermediate to [(dtbp Cbz)PPb], afforded an unsymmetric and incompletely decarbonylated product [(dtbp Cbz)2 Pb2 P2 CO] formally comprising a [(dtbp Cbz)PPb] and a [(dtbp Cbz)PbPCO] moiety.

Challenging an old paradigm by demonstrating transition metal-like chemistry at a neutral nonmetal center

We describe nonmetal adducts of the phosphorus center of terminal phosphinidene complexes using classical C- and N-ligands from metal coordination chemistry. The nature of the L-P bond has been analyzed by various theoretical methods including a refined method on the variation of the Laplacian of electron density ∇2ρ along the L-P bond path. Studies on thermal stability reveal stark differences between N-ligands such as N-methyl imidazole and C-ligands such as tert-butyl isocyanide, including ligand exchange reactions and a surprising formation of white phosphorus. A milestone is the transformation of a nonmetal-bound isocyanide into phosphaguanidine or an acyclic bisaminocarbene bound to phosphorus; the latter is analogous to the chemistry of transition metal-bound isocyanides, and the former reveals the differences. This example has been studied via cutting-edge DFT calculations leading to two pathways differently favored depending on variations in steric demand. This study reveals the emergence of organometallic from coordination chemistry of a neutral nonmetal center.

Heteroatom-Based Diradical(oid)s

Heteroatom-centered diradical(oid)s have been in the focus of molecular main group chemistry for nearly 30 years. During this time, the diradical concept has evolved and the focus has shifted to the rational design of diradical(oid)s for specific applications. This review article begins with some important theoretical considerations of the diradical and tetraradical concept. Based on these theoretical considerations, the design of diradical(oid)s in terms of ligand choice, steric, symmetry, electronic situation, element choice, and reactivity is highlighted with examples. In particular, heteroatom-centered diradical reactions are discussed and compared with closed-shell reactions such as pericyclic additions. The comparison between closed-shell reactivity, which proceeds in a concerted manner, and open-shell reactivity, which proceeds in a stepwise fashion, along with considerations of diradical(oid) design, provides a rational understanding of this interesting and unusual class of compounds. The application of diradical(oid)s, for example in small molecule activation or as molecular switches, is also highlighted. The final part of this review begins with application-related details of the spectroscopy of diradical(oid)s, followed by an update of the heteroatom-centered diradical(oid)s and tetraradical(oid)s published in the last 10 years since 2013.

Cationic Phosphinidene as a Versatile P1 Building Block: [LC-P]+ Transfer from Phosphonio-Phosphanides [LC-P-PR3]+ and Subsequent LC Replacement Reactions (LC = N-Heterocyclic Carbene)

Cationic imidazoliumyl(phosphonio)-phosphanides [LC-P-PR3]+ (1a-e+, LC = 4,5-dimethyl-1,3-diisopropylimidazolium-2-yl; R = alkyl, aryl) are obtained via the nucleophilic fragmentation of tetracationic tetraphosphetane [(LC-P)4][OTf]4 (2[OTf]4) with tertiary phosphanes. They act as [LC-P]+ transfer reagents in phospha-Wittig-type reactions, when converted with various thiocarbonyls, giving unprecedented cationic phosphaalkenes [LC-P═CR2]+ (5a-f[OTf]) or phosphanides [LC-P-CR(NR2')]+ (6a-d[OTf]). Theoretical calculations suggest that three-membered cyclic thiophosphiranes are crucial intermediates of this reaction. To test this hypothesis, treatment of [LC-P-PPh3]+ with phosphaalkenes, that are isolobal to thioketones, permits the isolation of diphosphirane salts 11a,b[OTf]. Furthermore, preliminary studies suggest that the cationic phosphaalkene [LC-P═CPh2]+ may be employed to access rare examples of η2-P═C π-complexes with Pd0 and Pt0 when treated with [Pd(PPh3)4] and [Pt(PPh3)3] for which analogous complexes of neutral phosphaalkenes are scarce. The versatility of [LC-P]+ as a valuable P1 building block was showcased in substitution reactions of the transferred LC-substituent using nucleophiles. This is demonstrated through the reactions of 5a[OTf] and 6c[OTf] with Grignard reagents and KNPh2, providing a convenient, high-yielding access to MesP═CPh2 (16) and otherwise difficult-to-synthesize 1,3-diphosphetane 17 and P-aminophosphaalkenes.

Photochemical formation and reversible base-induced cleavage of a phosphagallene

The reactivity of Cp*Ga (Cp* = C₅Me₅) towards phosphanylidenephosphoranes of the type ^ArTerP(PMe₃) (^ArTer = ^DipTer 2,6-(2,6-iPr₂C₆H₃)₂C₆H₃), ^TipTer 2,6-(2,4,6-iPr₃C₆H₂)₂C₆H₃ was investigated. While no thermal reaction was observed (in line with DFT results), irradiation at 405 nm at low temperatures resulted in the formation of phosphagallenes ^DipTerP = GaCp* (1a) and ^TipTerP = GaCp* (1b) accompanied by release of PMe₃. When warming the reaction mixture to ambient temperatures without irradiation, the clean re-formation of ^ArTerP(PMe₃) and Cp*Ga in a second-order reaction was observed. Upon removal of PMe₃, 1a and 1b were isolated and fully characterized. Both derivatives were found to be labile and decomposed to the phosphafluorenes 2a and 2b, indicating generation of the transient phosphinidene ^ArTerP along with Cp*Ga. First reactivity studies show that CO₂ and H₂O cleanly reacted with 1a, affording ^DipTerPCO (3) and ^DipTerPH₂ (4), respectively.

Understanding the Organometallic Step: SO2 Insertion into Bi(III)-C(Ph) Bond

Heavier main-group element-catalyzed reactions provide an increasingly attractive tool to perform transformations mimicking the behaviors of transition metal catalysts. Recently, Magre and Cornella reported a Bi-catalyzed synthesis of aryl sulfonyl fluorides, which involves a fundamental organometallic step of SO₂ insertion into the Bi-Ph bond. Our theoretical studies reveal that i) the ability of hypervalent coordination of the Bi(III) center allows facile coordination sphere expansion for the SO₂ coordination via one oxygen atom; and ii) the high polarity of the Bi-Ph bond makes the Ph migration from the Bi(III) center feasible. These features enable the heavier main group element to resemble the transition metal having flexibility for ligand association and dissociation. Furthermore, iii) the available π electron pair of the migrating Ph group stabilizes the SO₂ insertion transition state by maintaining interaction with the Bi(III) center during migration. The insight helps us better understand the heavier main-group catalysis.

Atom-economical synthesis of 1,2-bis(phosphine oxide)ethanes from calcium carbide with straightforward access to deuterium- and 13C-labeled bidentate phosphorus ligands and metal complexes

Straightforward access to bidentate phosphorus ligands and bis(phosphineoxide)ethanes is described based on atom-economic addition reaction. A practical approach was developed to incorporate 2H and 13C labels using easily available reagents.

Metal-Free N-H Bond Activation by Phospha-Wittig Reagents

N-containing molecules are mostly derived from ammonia (NH3 ). Ammonia activation has been demonstrated for single transition metal centers as well as for low-valent main group species. Phosphinidenes, mono-valent phosphorus species, can be stabilized by phosphines, giving so-called phosphanylidenephosphoranes of the type RP(PR'3 ). We demonstrate the facile, metal-free NH3 activation using ArP(PMe3 ), affording for the first time isolable secondary aminophosphines ArP(H)NH2 . DFT studies reveal that two molecules of NH3 act in concert to facilitate an NH3 for PMe3 exchange. Furthermore, H2 NR and HNR2 activation is demonstrated.

Phosphine-Stabilized Germylidenylpnictinidenes as Synthetic Equivalents of Heavier Nitrile and Isocyanide in Cycloaddition Reactions with Alkynes

The reactions of chlorogermylene M^sFluind^tBu-GeCl 1, supported by a sterically encumbered hydrindacene ligand M^sFluind^tBu, with NaPCO(dioxane)_2.5 and NaAsCO(18-c-6) in the presence of trimethylphosphine afforded trimethylphosphine-stabilized germylidenyl-phosphinidene 2 and -arsinidene 3, respectively. Structural and computational investigations reveal that the Ge-E' bond (E' = P and As) features a multiple-bond character. 2 and 3 exhibit diverse reactivity toward trimethylsilylacetylene and 4-tetrabutylphenylacetylene. Specifically, 2 underwent cycloadditions with both alkynes affording the first six-membered aromatic phosphagermabenzen-1-ylidenes 4 and 5, respectively, through the heavier isocyanide intermediate M^sFluind^tBu-PGe. In contrast, 3 could serve as a synthetic equivalent of heavier isocyanides and nitriles when treated with trimethylsilylacetylene and 4-tetrabutylphenylacetylene yielding arsagermene 6 and arsolylgermylene 7, respectively. The reaction mechanisms for the cycloadditions were investigated through density functional theory calculations. The reactivity studies highlight the potential of 2 and 3 in accessing heavy main-group element-containing heterocycles.

Recent advances in the chemistry of the phosphaethynolate and arsaethynolate anions

Over the past decade, the reactivity of 2-phosphaethynolate (OCP^-), a heavier analogue of the cyanate anion, has been the subject of momentous interest in the field of modern organometallic chemistry. It is used as a precursor to novel phosphorus-containing heterocycles and as a ligand in decarbonylative processes, serving as a synthetic equivalent of a phosphinidene derivative. This perspective aims to describe advances in the reactivities of phosphaethynolate and arsaethynolate anions (OCE^-; E = P, As) with main-group element, transition metal, and f-block metal scaffolds. Further, the unique structures and bonding properties are discussed based on spectroscopic and theoretical studies.

Insight into fragmentation of a phosphirane to form phosphinidene complexes: an illustration with the 1-phenylselenylphosphirane W(CO)5 complex

Density functional theory (DFT) calculations with 1-phenylselenylphosphirane complex 1 provide an insight into phosphirane fragmentation to phosphinidene complexes. FMO and ELF analyses show that the cleavage of two P-C σ bonds of phosphirane proceeds via an asynchronous concerted pathway. Transient [PhSeP-W(CO)₅] was generated by dissociation of 1 at 90 °C and trapped with different reagents. The 1-phenoxylphosphirane complex undergoes [1 + 2] retroaddition at a comparatively higher temperature which implies that the lone pair of the adjacent atom center of phosphorus plays a major role in phosphirane fragmentation.

Facile Synthesis of the Dicyanophosphide Anion via Electrochemical Activation of White Phosphorus: An Avenue to Organophosphorus Compounds

Organophosphorus compounds (OPCs) have gained tremendous interest in the past decades due to their wide applications ranging from synthetic chemistry to materials and biological sciences. We describe herein a practical and versatile approach for the transformation of white phosphorus (P₄) into useful OPCs with high P atom economy via a key bridging anion [P(CN)₂]^-. This anion can be prepared on a gram scale directly from P₄ through an electrochemical process. A variety of OPCs involving phosphinidenes, cyclophosphanes, and phospholides have been made readily accessible from P₄ in a two-step manner. Our approach has a significant impact on the future preparation of OPCs in laboratory and industrial settings.

Intramolecular Activation of Enones by Electrophilic Phosphinidene Complexes to Construct 2-Phosphafurans

Herein, we report a facile and highly atom-economic approach to 2-phosphafurans by using simple 2-chloroethylphosphine and acetylenic ketones. The key step of this protocol utilizes the Lewis acidity of electrophilic phosphinidenes to induce an intramolecular cyclization with enones. Dearomative hetero-Diels-Alder reactions of 2-phosphafurans provide two series of bicyclic phosphacycles. This rare synthetic application of Lewis acidity of electrophilic phosphinidene complexes represents a new frontier of phosphinidene chemistry.

Thiazetidin-2-ylidenes as four membered N-heterocyclic carbenes: theoretical studies and the generation of complexes with N+ center

Thiazetidin-2-ylidenes have been designed as four membered N-heterocyclic carbenes (NHCs) using quantum chemical studies. These species are smaller analogs of thiazol-2-ylidenes, possess high singlet stability (57 kcal mol^-1) and large nucleophilicity (3.4 eV). The possible existence of these carbenes has been established by synthesizing and crystalizing compounds with NHC→N⁺←(thiazetidin-2-ylidene) coordination bonds.

A Free Aluminylene with Diverse σ-Donating and Doubly σ/π-Accepting Ligand Features for Transition Metals*

We report herein the synthesis, characterization, and coordination chemistry of a free N-aluminylene, namely a carbazolylaluminylene 2 b. This species is prepared via a reduction reaction of the corresponding carbazolyl aluminium diiodide. The coordination behavior of 2 b towards transition metal centers (W, Cr) is shown to afford a series of novel aluminylene complexes 3-6 with diverse coordination modes. We demonstrate that the tri-active ambiphilic Al center in 2 b can behave as: 1. a σ-donating and doubly π-accepting ligand; 2. a σ-donating, σ-accepting and π-accepting ligand; and 3. a σ-donating and doubly σ-accepting ligand. Additionally, we show ligand exchange at the aluminylene center providing access to the modulation of electronic properties of transition metals without changing the coordinated atoms. Investigations of 2 b with IDippCuCl (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) show an unprecedented aluminylene-alumanyl transformation leading to a rare terminal Cu-alumanyl complex 8. The electronic structures of such complexes and the mechanism of the aluminylene-alumanyl transformation are investigated through density functional theory (DFT) calculations.

Synthesis, Structure and Reactivity of a Cyapho-Cyanamide Salt

We describe a facile synthesis of the cyapho-cyanamide salt [Na(18-crown-6)][N(CN)(CP)] from reaction of [Na(18-crown-6)][PH₂ ] (18-crown-6=1,4,7,10,13,16-hexaoxacyclooctadecane) with dimethyl N-cyanocarbonimidate, (MeO)₂ C=N(CN). The reaction proceeds with elimination of two equivalents of methanol. Careful tuning of the reaction conditions allowed for the isolation and characterization of the N-cyano(carboximidate)phosphide intermediate [HP{C(OMe)N(CN)}]^- . Due to the adverse effects of methanol in these reaction mixtures, a bulk scale synthesis of [Na(18-crown-6)][N(CN)(CP)] could be achieved by addition of a base (LiHMDS) to neutralize the resulting alcohol. Further reactivity studies of this anion reveal that functionalization at the phosphorus atom is viable to yield a new family of cyanide-functionalised phosphorus heterocycles.

Non-conventional Behavior of a 2,1-Benzazaphosphole: Heterodiene or Hidden Phosphinidene?

The titled 2,1-benzazaphosphole (1) (i. e. ArP, where Ar=2-(DippN=CH)C6 H4 , Dipp=2,6-iPr2 C6 H3 ) showed a spectacular reactivity behaving both as a reactive heterodiene in hetero-Diels-Alder (DA) reactions or as a hidden phosphinidene in the coordination toward selected transition metals (TMs). Thus, 1 reacts with electron-deficient alkynes RC≡CR (R=CO2 Me, C5 F4 N) giving 1-phospha-1,4-dihydro-iminonaphthalenes 2 and 3, that undergo hydrogen migration producing 1-phosphanaphthalenes 4 and 5. Compound 1 is also able to activate the C=C double bond in selected N-alkyl/aryl-maleimides RN(C(O)CH)2 (R=Me, tBu, Ph) resulting in the addition products 7-9 with bridged bicyclic [2.2.1] structures. The binding of the maleimides to 1 is semi-reversible upon heating. By contrast, when 1 was treated with selected TM complexes, it serves as a 4e donor bridging two TMs thus producing complexes [μ-ArP(AuCl)2 ] (10), [(μ-ArP)4 Ag4 ][X]4 (X=BF4 (11), OTf (12)) and [μ-ArP(Co2 (CO)6 )] (13). The structure and electron distribution of the starting material 1 as well as of other compounds were also studied from the theoretical point of view.

Vibrational spectrum and photochemistry of phosphaketene HPCO

The vibrational spectra of the simplest phosphaketene HPCO and its isotopologue DPCO in solid Ar-matrices at 12.0 K have been analyzed with the aid of the computations at the CCSD(T)-F12a/cc-pVTZ-F12 level using configuration-selective vibrational configuration interaction (VCI). In addition to the four IR fundamentals, four overtone and ten combination bands have been unambiguously identified. Furthermore, the photochemistry of HPCO in the matrix has been investigated for the first time. Upon UV-light irradiation (365 or 266 nm), CO-elimination occurs by forming the parent phosphinidene HP that can be trapped by ˙NO to yield the elusive phosphinimine-N-oxyl radical HPNO˙. In contrast, an excimer laser (193 nm) irradiation of HPCO causes additional decomposition to H˙ and ˙PCO with concomitant formation of the long-sought phosphaethyne HOCP.

N2/CO Exchange at a Vinylidene Carbon Center: Stable Alkylidene Ketenes and Alkylidene Thioketenes from 1,2,3-Triazole Derived Diazoalkenes

We present a new class of room-temperature stable diazoalkenes featuring a 1,2,3-triazole backbone. Dinitrogen of the diazoalkene moiety can be thermally displaced by an isocyanide and carbon monoxide. The latter alkylidene ketenes are typically considered as highly reactive compounds, traditionally only accessible by flash vacuum pyrolysis. We present a new and mild synthetic approach to the first structurally characterized alkylidene ketenes by a substitution reaction. Density functional theory calculations suggest the substitution with isocyanides to take place via a stepwise addition/elimination mechanism. In the case of carbon monoxide, the reaction proceeds through an unusual concerted exchange at a vinylidene carbon center. The vinylidene ketenes react with carbon disulfide via a four-membered thiete intermediate to give vinylidene thioketenes under release of COS. We present spectroscopic as well as structural data for the complete isoelectronic series (R₂C═C═X; X = N₂, CO, CNR, CS) including ¹J(¹³C-¹³C) data. As N₂, CO, and isocyanides belong to the archetypical ligands in transition-metal chemistry, this process can be interpreted in analogy to coordination chemistry as a ligand exchange reaction at a vinylidene carbon center.

A Thermally Stable Magnesium Phosphaethynolate Grignard Complex

The 2-phosphaethynolate (OCP) anion has found versatile applications across the periodic table but remains underexplored in group 2 chemistry due to challenges in isolating thermally stable complexes. By rationally modifying their coordination environments using 1,3-dialkyl-substituted N-heterocyclic carbenes (NHCs), we have now isolated and characterized thermally stable, structurally diverse, and hydrocarbon soluble magnesium phosphaethynolate complexes (2, 4^Me, and 8-10), including the novel phosphaethynolate Grignard reagent (2^iPr). The methylmagnesium phosphaethynolate and magnesium diphosphaethynolate complexes readily activate dioxane with subsequent H-atom abstraction to form [(NHC)MgX(μ-OEt)]₂ [X = Me (3) or OCP (8 and 9)] complexes. Their reactivities increased with the Lewis acidity of the Mg²⁺ cation and may be attenuated by Lewis base saturation or a slight increase in carbene sterics. Solvent effects were also investigated and led to the surreptitious isolation of an ether-free sodium phosphaethynolate (NHC)₃Na(OCP) (6), which is soluble in aromatic hydrocarbons and can be independently prepared by the reaction of NHC and [Na(dioxane)₂][OCP] in toluene. Under forcing conditions (105 °C, 3 days), the magnesium diphosphaethynolate complex (NHC)₃Mg(OCP)₂ (10) decomposes to a mixture of organophosphorus complexes, among which a thermal decarbonylation product [(NHC)₂P^I][OCP] (11) was isolated.

On 1,3-phosphaazaallenes and their diverse reactivity

1,3-Phosphaazaallenes are heteroallenes of the type RP Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CNR′ and little is known about their reactivity. In here we describe the straightforward synthesis of ArPCNR (Ar = Mes*, 2,4,6-tBu-C₆H₂; ^MesTer, 2.6-(2,4,6-Me₃C₆H₂)–C₆H₃; ^DipTer, 2.6-(2,6-iPr₂C₆H₂)–C₆H₃; R = tBu; Xyl, 2,6-Me₂C₆H₃) starting from phospha-Wittig reagents ArPPMe₃ and isonitriles CNR. It is further shown that ArPCNtBu are thermally labile with respect to the loss of iso-butene and it is shown that the cyanophosphines ArP(H)CN are synthetically feasible and form the corresponding phosphanitrilium borates with B(C₆F₅)₃, whereas deprotonation of ^DipTerP(H)CN was shown to give an isolable cyanidophosphide. Lastly, the reactivity of ArPCNR towards Pier's borane was investigated, showing hydroboration of the CN bond in Mes*PCNtBu to give a hetero-butadiene, while with ^DipTerPCNXyl the formation of the Lewis acid–base adduct with a B–P linkage was observed.

The combination of phospha-Wittig reagents with isonitriles affords 1,3-phosphaazaallenes and their diverse reactivity has been studied in detail.

Colorimetric Metal-Free Detection of Carbon Monoxide: Reversible CO Uptake by a BNB Frustrated Lewis Pair

We report two BNB‐type frustrated Lewis pairs which feature an acceptor‐donor‐acceptor functionalized cavity, and which differ in the nature of the B‐bound fluoroaryl group (C₆F₅ vs. C₆H₃(CF₃)₂‐3,5, Ar^f). These receptor systems are capable of capturing gaseous CO, and in the case of the ‐BAr^f₂ system this can be shown to occur in reversible fashion at/above room temperature. For both systems, the binding event is accompanied by migration of one of the aryl substituents to the electrophilic carbon of the CO guest. Experiments utilizing an additional equivalent of P^tBu₃ allow the initially formed (non‐migrated) CO adduct to be identified and trapped (via demethylation), while also establishing the reversibility of the B‐to‐C migration process. When partnered with the slightly less Lewis acidic ‐BAr^f₂ substituent, this reversibility allows for release of the captured carbon monoxide in the temperature range 40–70 °C, and the possibility for CO sensing, making use of the associated colourless to orange/red colour change.