Selective Catalytic Reduction over Cu/SSZ-13: Linking Homo- and Heterogeneous Catalysis

Role of low-molecular-weight organic compounds on photochemical formation of Mn(III)-ligands in aqueous systems: Implications for BPA removal

Aqueous trivalent manganese [Mn(III)], an important reactive intermediate, is ubiquitous in natural surface water containing humic acid (HA). However, the effect of low-molecular-weight organic acids (LMWOAs) on the formation, stability and reactivity of Mn(III) intermediate is still unknown. In this study, six LMWOAs, including oxalic acid (Oxa), salicylic acid (Sal), catechol (Cat), caffeic acid (Caf), gallic acid (Gal) and ethylene diamine tetraacetic acid (EDTA), were selected to investigate the effects of LMWOAs on the degradation of BPA induced by in situ formed Mn(III)-L in the HA/Mn(II) system under light irradiation. The chromophoric constituents of HA could absorb light radiation and generate superoxide radical to promote the oxidation of Mn(II) to form Mn(III), which was further involved in transformation of BPA. Our results implied that different LMWOAs did significantly impact on Mn(III) production and its degradation of BPA due to their different functional group. EDTA, Oxa and Sal extensively increased the Mn(III) concentration from 50 to 100 μM compared to the system without LMWOAs, following the order of EDTA > Oxa > Sal, and also enhanced the degradation of BPA with the similar patterns. In contrast, Cat, Caf and Gal had an inhibitory effect on the formation of Mn(III), which is likely because they consumed the superoxide radicals generated from irradiated HA, resulting in the inhibition of Mn(II) oxidation and further BPA removal. The product identification and theoretical calculation indicated that a single electron transfer process occurred between Mn(III)-L and BPA, forming BPA radicals and subsequent self-coupling products. Our results demonstrated that the LMWOAs with different structures could alter the cycling process of Mn via complexation and redox reactions, which would provide new implications for the removal of organic pollutants in surface water.

π-Sticked Metal‒Organic Monolayers for Single-Metal-Site Dependent CO2 Photoreduction and Hydrogen Evolution Reaction

Hierarchical self-assembly of 2D metal‒organic layers (MOLs) for the construction of advanced functional materials have witnessed considerable interest, due to the increasing atomic utilizations and well-defined atom‒property relationship. However, the construction of atomically precise MOLs with mono-/few-layered thickness through hierarchical self-assembly process remains a challenge, mostly because the elaborate long-range order is difficult to control via conventional noncovalent interaction. Herein, a quadruple π-sticked metal‒organic layer (πMOL) is reported with checkerboard-like lattice in ≈1.0 nanometre thickness, on which the catalytic selectivity can be manipulated for highly efficient CO2 reduction reaction (CO2RR) and hydrogen evolution reaction (HER) over a single metal site. In saturated CO2 aqueous acetonitrile, Fe-πMOL achieves a highly effective CO2RR with the yield of ≈3.98 mmol g‒1 h‒1 and 91.7% selectivity. In contrast, the isostructural Co-πMOL as well as mixed metallic FeCo-πMOL exhibits a high activity toward HER under similar conditions. DFT calculations reveal that single metal site exhibits the significant difference in CO2 adsorption energy and activation barrier, which triggers highly selective CO2RR for Fe site and HER for Co site, respectively. This work highlights the potential of supramolecular π…π interaction for constructing monolayer MOL materials to uniformly distribute the single metal sites for artificial photosynthesis.

Spatial Distribution of Brønsted Acid Sites Determines the Mobility of Reactive Cu Ions in the Cu-SSZ-13 Catalyst during the Selective Catalytic Reduction of NOx with NH3

The formation of dimer-Cu species, which serve as the active sites of the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR), relies on the mobility of CuI species in the channels of the Cu-SSZ-13 catalysts. Herein, the key role of framework Brønsted acid sites in the mobility of reactive Cu ions was elucidated via a combination of density functional theory calculations, in situ impedance spectroscopy, and in situ diffuse reflectance ultraviolet-visible spectroscopy. When the number of framework Al sites decreases, the Brønsted acid sites decrease, leading to a systematic increase in the diffusion barrier for [Cu(NH3)2]+ and less formation of highly reactive dimer-Cu species, which inhibits the low-temperature NH3-SCR reactivity and vice versa. When the spatial distribution of Al sites is uneven, the [Cu(NH3)2]+ complexes tend to migrate from an Al-poor cage to an Al-rich cage (e.g., cage with paired Al sites), which effectively accelerates the formation of dimer-Cu species and hence promotes the SCR reaction. These findings unveil the mechanism by which framework Brønsted acid sites influence the intercage diffusion and reactivity of [Cu(NH3)2]+ complexes in Cu-SSZ-13 catalysts and provide new insights for the development of zeolite-based catalysts with excellent SCR activity by regulating the microscopic spatial distribution of framework Brønsted acid sites.

Cu-OFF/ERI Zeolite: Intergrowth Structure Synergistically Boosting Selective Catalytic Reduction of NOx with NH3

Cu-SSZ-13 has been commercialized for selective catalytic reduction with ammonia (NH3-SCR) to remove NOx from diesel exhaust. As its synthesis usually requires toxic and costly organic templates, the discovery of alternative Cu-based zeolite catalysts with organotemplate-free synthesis and comparable or even superior NH3-SCR activity to that of Cu-SSZ-13 is of great academic and industrial significance. Herein, we demonstrated that Cu-T with an intergrowth structure of offretite (OFF) and erionite (ERI) synthesized by an organotemplate-free method showed better catalytic performance than Cu-ERI and Cu-OFF as well as Cu-SSZ-13. Structure characterizations and density functional theory calculations indicated that the intergrowth structure promoted more isolated Cu2+ located at the 6MR of the intergrowth interface, resulting in a better hydrothermal stability of Cu-T than Cu-ERI and Cu-OFF. Strikingly, the low-temperature activity of Cu-T significantly increased after hydrothermal aging, while that of Cu-ERI and Cu-OFF substantially decreased. Based on in situ diffuse reflectance infrared Fourier transform spectra analysis and density functional theory calculations, the reason can be attributed to the fact that NH4NO3 formed on the CuxOy species within ERI polymorph of Cu-T underwent a fast SCR reaction pathway with the assistance of Brønsted acid sites at the intergrowth interfaces under standard SCR reaction conditions. Significantly, Cu-T exhibited a wider temperature window at a catalytic activity of over 90% than Cu-SSZ-13 (175-550 vs 175-500 °C for fresh and 225-500 vs 250-400 °C for hydrothermal treatment). This work provides a new direction for the design of high-performance NH3-SCR catalysts in terms of the interplay of the intergrowth structure of zeolites.

Effect of NO2 on N2 O production and NOx emission reduction in NH3 Selective Catalytic Reduction

With the introduction of increasingly strict emission regulations, reducing nitrogen oxide (NOx ) emissions and nitrous oxide (N2 O) production from diesel engines have become the focus of research. At high temperature, the reaction of NO2 in the catalyst generates the intermediate product NH4 NO3 , which first crystallizes below 300 °C. These crystals tend to block the pores and inhibit the reaction. Subsequently, N2 O is produced through the decomposition of NH4 NO3 , leading to additional pollution. Therefore, the concentration of NO2 has a direct impact on both the NOx conversion efficiency and the generation of N2 O, requiring consideration of the optimal proportion of NO2 in SCR. Considering these two factors, it is concluded that the optimal amount of NO2 varies with temperature. To improve the NOx conversion rate of the Cu-SSZ-13 catalyst at low temperatures and reduce N2 O generation, the optimal NO2 ratio of the Cu-SSZ-13 catalyst under various operating conditions is studied using numerical simulations. As the temperature rises, the optimal NO2 /NOx ratio first increases and then decreases. Under the optimal NO2 /NOx ratio, the NOx conversion rate significantly increases, while N2 O generation decreases considerably. The optimal NO2 /NOx ratio also provides suggestions for the optimization of the DOC-DPF-DCR system.

In Situ UV-Vis-NIR Absorption Spectroscopy and Catalysis

This review highlights in situ UV-vis-NIR range absorption spectroscopy in catalysis. A variety of experimental techniques identifying reaction mechanisms, kinetics, and structural properties are discussed. Stopped flow techniques, use of laser pulses, and use of experimental perturbations are demonstrated for in situ studies of enzymatic, homogeneous, heterogeneous, and photocatalysis. They access different time scales and are applicable to different reaction systems and catalyst types. In photocatalysis, femto- and nanosecond resolved measurements through transient absorption are discussed for tracking excited states. UV-vis-NIR absorption spectroscopies for structural characterization are demonstrated especially for Cu and Fe exchanged zeolites and metalloenzymes. This requires combining different spectroscopies. Combining magnetic circular dichroism and resonance Raman spectroscopy is especially powerful. A multitude of phenomena can be tracked on transition metal catalysts on various supports, including changes in oxidation state, adsorptions, reactions, support interactions, surface plasmon resonances, and band gaps. Measurements of oxidation states, oxygen vacancies, and band gaps are shown on heterogeneous catalysts, especially for electrocatalysis. UV-vis-NIR absorption is burdened by broad absorption bands. Advanced analysis techniques enable the tracking of coking reactions on acid zeolites despite convoluted spectra. The value of UV-vis-NIR absorption spectroscopy to catalyst characterization and mechanistic investigation is clear but could be expanded.

Unexpected Promotion Effect of H2O on the Selective Catalytic Reduction of NOx with NH3 over Cu-SSZ-39 Catalysts

Water molecules commonly inhibit the selective catalytic reduction (SCR) of NOx with NH3 on most catalysts, and water resistance is a long-standing challenge for SCR technology. Herein, by combining experimental measurements and density functional theory (DFT) calculations, we found that water molecules do not inhibit and even promote the NOx conversion to some extent over the Cu-SSZ-39 zeolites, a promising SCR catalyst. Water acting as a ligand on active Cu sites and as a reactant in the SCR reaction significantly improves the O2 activation performance and reduces the overall energy barrier of the catalytic cycle. This work unveils the mechanism of the unexpected promotion effect of water on the NH3-SCR reaction over Cu-SSZ-39 and provides fundamental insight into the development of zeolite-based SCR catalysts with excellent activity and water resistance.

Flow control by circular cavities in lateral flow porous membranes

This research explores the flow penetration in porous media by virtue of capillary action and geometric control of the liquid imbibition rate in microfluidic paper-based analytical devices (μPADs) having applications in food quality management, medical diagnostics, and environmental monitoring. We examine changes in flow resistance and membrane geometry, aiming to understand factors influencing capillary penetration rates for various practical applications. We conducted experiments and simulations using lateral porous membranes and altered the flow resistance by changing the liquids or the paper channel geometry by adding cavities. From experiments, it was revealed that by creating a circular cavity in the paper channel, the penetration rate was sufficiently altered. Moreover, increasing the cavity size and type of liquid (w.r.t. viscosity) also caused a decrease in the flow rate. Imbibition rates were also influenced by the position of the cavities in the paper channel. The maximum delay for water was almost 2 times with a 16 mm circular cavity located at 3 cm from strip bottom edge. Overall, we attained a maximum delay in the case of castor oil which was almost 85 times slower than water and 3.7 times slower than olive oil. A good agreement was observed with CFD analysis. We believe that this research would help in developing advance techniques to enhance the flow control strategies in μPADs and indicators.

Design of Bifunctional Cu-SSZ-13@Mn2Cu1Al1Ox Core-Shell Catalyst with Superior Activity for the Simultaneous Removal of VOCs and NOx

Synchronous control of volatile organic compounds (VOCs) and nitrogen oxides (NOx) is of great importance for ozone and PM2.5 pollution control. Balancing VOC oxidation and the NH3-SCR reaction is the key to achieving the simultaneous removal of these two pollutants. In this work, a vertically oriented Mn2Cu1Al1Ox nanosheet is grown in situ on the surface of Cu-SSZ-13 to synthesize a core-shell bifunctional catalyst (Cu-SSZ-13@Mn2Cu1Al1Ox) with multiple active sites. The optimized Cu-SSZ-13@Mn2Cu1Al1Ox catalyst delivered excellent performance for the simultaneous removal of VOCs and NOx with both 100% conversion at 300 °C in the presence of 5% water vapor. Physicochemical characterization and density functional theory (DFT) calculations revealed that Cu-SSZ-13@Mn2Cu1Al1Ox possesses more surface acidity and oxygen vacancies. The charge transfer between the core and shell is the intrinsic reason for the improved activity for both VOC and NOx removal. The molecular orbital theory is used to explain the different adsorption energies due to the different bonding modes between the core-shell and mixed individual catalysts. This work provides a novel strategy for designing efficient catalysts for the simultaneous removal of VOCs and NOx or other multiple pollutants.

Effect of Framework Composition and NH3 on the Diffusion of Cu+ in Cu-CHA Catalysts Predicted by Machine-Learning Accelerated Molecular Dynamics

Cu-exchanged zeolites rely on mobile solvated Cu+ cations for their catalytic activity, but the role of the framework composition in transport is not fully understood. Ab initio molecular dynamics simulations can provide quantitative atomistic insight but are too computationally expensive to explore large length and time scales or diverse compositions. We report a machine-learning interatomic potential that accurately reproduces ab initio results and effectively generalizes to allow multinanosecond simulations of large supercells and diverse chemical compositions. Biased and unbiased simulations of [Cu(NH3)2]+ mobility show that aluminum pairing in eight-membered rings accelerates local hopping and demonstrate that increased NH3 concentration enhances long-range diffusion. The probability of finding two [Cu(NH3)2]+ complexes in the same cage, which is key for SCR-NOx reaction, increases with Cu content and Al content but does not correlate with the long-range mobility of Cu+. Supporting experimental evidence was obtained from reactivity tests of Cu-CHA catalysts with a controlled chemical composition.

Mechanism of NH3-SCR over P/CeO2 Catalysts Investigated by Operando Spectroscopies

This study reports a comprehensive investigation into the active sites and reaction mechanism for the selective catalytic reduction of NO by NH3 (NH3-SCR) over phosphate-loaded ceria (P/CeO2). Catalyst characterization and density functional theory calculations reveal that H3PO4 and H2P2O6 species are the dominant phosphate species on the P/CeO2 catalysts under the experimental conditions. The reduction/oxidation half-cycles (RHC/OHC) were investigated using in situ X-ray absorption near-edge structure for Ce L3-edge, ultraviolet-visible, and infrared (IR) spectroscopies together with online analysis of outlet products (operando spectroscopy). The Ce4+(OH-) species, possibly adjacent to the phosphate species, are reduced by NO + NH3 to produce N2, H2O, and Ce3+ species (RHC). The Ce3+ species is reoxidized by aqueous O2 (OHC). The results from IR spectroscopy suggest that the RHC initiates with the reaction between NO and Ce4+(OH-) to yield Ce3+ and gaseous HONO, which then react with NH3 to produce N2 and H2O via NH4NO2 intermediates.

Elucidating the reaction mechanism of SO2 with Cu-CHA catalysts for NH3-SCR by X-ray absorption spectroscopy

The application of Cu-CHA catalysts for the selective catalytic reduction of NOx by ammonia (NH3-SCR) in exhaust systems of diesel vehicles requires the use of fuel with low sulfur content, because the Cu-CHA catalysts are poisoned by higher concentrations of SO2. Understanding the mechanism of the interaction between the Cu-CHA catalyst and SO2 is crucial for elucidating the SO2 poisoning and development of efficient catalysts for SCR reactions. Earlier we have shown that SO2 reacts with the [Cu2II(NH3)4O2]2+ complex that is formed in the pores of Cu-CHA upon activation of O2 in the NH3-SCR cycle. In order to determine the products of this reaction, we use X-ray absorption spectroscopy (XAS) at the Cu K-edge and S K-edge, and X-ray emission spectroscopy (XES) for Cu-CHA catalysts with 0.8 wt% Cu and 3.2 wt% Cu loadings. We find that the mechanism for SO2 uptake is similar for catalysts with low and high Cu content. We show that the SO2 uptake proceeds via an oxidation of SO2 by the [Cu2II(NH3)4O2]2+ complex, resulting in the formation of different CuI species, which do not react with SO2, and a sulfated CuII complex that is accumulated in the pores of the zeolite. The increase of the SO2 uptake upon addition of oxygen to the SO2-containing feed, evidenced by X-ray adsorbate quantification (XAQ) and temperature-programmed desorption of SO2, is explained by the re-oxidation of the CuI species into the [Cu2II(NH3)4O2]2+ complexes, which makes them available for reaction with SO2.

Copper Site Motion Promotes Catalytic NOx Reduction under Zeolite Confinement

Ammonia-mediated selective catalytic reduction (NH3-SCR) is currently the key approach to abate nitrogen oxides (NOx) emitted from heavy-duty lean-burn vehicles. The state-of-art NH3-SCR catalysts, namely, copper ion-exchanged chabazite (Cu-CHA) zeolites, perform rather poorly at low temperatures (below 200 °C) and are thus incapable of eliminating effectively NOx emissions under cold-start conditions. Here, we demonstrate a significant promotion of low-temperature NOx reduction by reinforcing the dynamic motion of zeolite-confined Cu sites during NH3-SCR. Combining complex impedance-based in situ spectroscopy (IS) and extended density-functional tight-binding molecular dynamics simulation, we revealed an environment- and temperature-dependent nature of the dynamic Cu motion within the zeolite lattice. Further coupling in situ IS with infrared spectroscopy allows us to unravel the critical role of monovalent Cu in the overall Cu mobility at a molecular level. Based on these mechanistic understandings, we elicit a boost of NOx reduction below 200 °C by reinforcing the dynamic Cu motion in various Cu-zeolites (Cu-CHA, Cu-ZSM-5, Cu-Beta, etc.) via facile postsynthesis treatments, either in a reductive mixture at low temperatures (below 250 °C) or in a nonoxidative atmosphere at high temperatures (above 450 °C).

Intergrowth Zeolites, Synthesis, Characterization, and Catalysis

Microporous zeolites that can act as heterogeneous catalysts have continued to attract a great deal of academic and industrial interest, but current progress in their synthesis and application is restricted to single-phase zeolites, severely underestimating the potential of intergrowth frameworks. Compared with single-phase zeolites, intergrowth zeolites possess unique properties, such as different diffusion pathways and molecular confinement, or special crystalline pore environments for binding metal active sites. This review first focuses on the structural features and synthetic details of all the intergrowth zeolites, especially providing some insightful discussion of several potential frameworks. Subsequently, characterization methods for intergrowth zeolites are introduced, and highlighting fundamental features of these crystals. Then, the applications of intergrowth zeolites in several of the most active areas of catalysis are presented, including selective catalytic reduction of NOx by ammonia (NH3-SCR), methanol to olefins (MTO), petrochemicals and refining, fine chemicals production, and biomass conversion on Beta, and the relationship between structure and catalytic activity was profiled from the perspective of intergrowth grain boundary structure. Finally, the synthesis, characterization, and catalysis of intergrowth zeolites are summarized in a comprehensive discussion, and a brief outlook on the current challenges and future directions of intergrowth zeolites is indicated.

Prediction of Cu Zeolite NH3-SCR Activity from Variable Temperature 1H NMR Spectroscopy

Selective catalytic reduction (SCR) of NOx by ammonia is one of the dominant pollution abatement technologies for near-zero NOx emission diesel engines. A crucial step in the reduction of NOx to N2 with Cu zeolite NH3-SCR catalysts is the generation of a multi-electron donating active site, implying the permanent or transient dimerization of Cu ions. Cu atom mobility has been implicated by computational chemistry as a key factor in this process. This report demonstrates how variable temperature 1H NMR reveals the Cu induced generation of sharp 1H resonances associated with a low concentration of sites on the zeolite. The onset temperature of the appearance of these signals was found to strongly correlate with the NH3-SCR activity and was observed for a range of catalysts covering multiple frameworks (CHA, AEI, AFX, ERI, ERI-CHA, ERI-OFF, *BEA), with different Si/Al ratios and different Cu contents. The results point towards universal applicability of variable temperature NMR to predict the activity of a Cu-zeolite SCR catalyst. The unique relationship of a spectroscopic feature with catalytic behavior for zeolites with different structures and chemical compositions is exceptional in heterogeneous catalysis.

Revealing the Formation and Reactivity of Cage-Confined Cu Pairs in Catalytic NOx Reduction over Cu-SSZ-13 Zeolites by In Situ UV-Vis Spectroscopy and Time-Dependent DFT Calculation

The low-temperature mechanism of chabazite-type small-pore Cu-SSZ-13 zeolite, a state-of-the-art catalyst for ammonia-assisted selective reduction (NH3-SCR) of toxic NOx pollutants from heavy-duty vehicles, remains a debate and needs to be clarified for further improvement of NH3-SCR performance. In this study, we established experimental protocols to follow the dynamic redox cycling (i.e., CuII ↔ CuI) of Cu sites in Cu-SSZ-13 during low-temperature NH3-SCR catalysis by in situ ultraviolet-visible spectroscopy and in situ infrared spectroscopy. Further integrating the in situ spectroscopic observations with time-dependent density functional theory calculations allows us to identify two cage-confined transient states, namely, the O2-bridged Cu dimers (i.e., μ-η2:η2-peroxodiamino dicopper) and the proximately paired, chemically nonbonded CuI(NH3)2 sites, and to confirm the CuI(NH3)2 pair as a precursor to the O2-bridged Cu dimer. Comparative transient experiments reveal a particularly high reactivity of the CuI(NH3)2 pairs for NO-to-N2 reduction at low temperatures. Our study demonstrates direct experimental evidence for the transient formation and high reactivity of proximately paired CuI sites under zeolite confinement and provides new insights into the monomeric-to-dimeric Cu transformation for completing the Cu redox cycle in low-temperature NH3-SCR catalysis over Cu-SSZ-13.

Interplay between copper redox and transfer and support acidity and topology in low temperature NH3-SCR

Low-temperature standard NH₃-SCR over copper-exchanged zeolite catalysts occurs on NH₃-solvated Cu-ion active sites in a quasi-homogeneous manner. As key kinetically relevant reaction steps, the reaction intermediate Cu^II(NH₃)₄ ion hydrolyzes to Cu^II(OH)(NH₃)₃ ion to gain redox activity. The Cu^II(OH)(NH₃)₃ ion also transfers between neighboring zeolite cages to form highly reactive reaction intermediates. Via operando electron paramagnetic resonance spectroscopy and SCR kinetic measurements and density functional theory calculations, we demonstrate here that such kinetically relevant steps become energetically more difficult with lower support Brønsted acid strength and density. Consequently, Cu/LTA displays lower Cu atomic efficiency than Cu/CHA and Cu/AEI, which can also be rationalized by considering differences in their support topology. By carrying out hydrothermal aging to eliminate support Brønsted acid sites, both Cu^II(NH₃)₄ ion hydrolysis and Cu^II(OH)(NH₃)₃ ion migration are hindered, leading to a marked decrease in Cu atomic efficiency for all catalysts.

Reductive Coupling of Nitric Oxide by Cu(I): Stepwise Formation of Mono- and Dinitrosyl Species En Route to a Cupric Hyponitrite Intermediate

Transition-metal-mediated reductive coupling of nitric oxide (NO(g)) to nitrous oxide (N2O(g)) has significance across the fields of industrial chemistry, biochemistry, medicine, and environmental health. Herein, we elucidate a density functional theory (DFT)-supplemented mechanism of NO(g) reductive coupling at a copper-ion center, [(tmpa)CuI(MeCN)]+ (1) {tmpa = tris(2-pyridylmethyl)amine}. At -110 °C in EtOH (<-90 °C in MeOH), exposing 1 to NO(g) leads to a new binuclear hyponitrite intermediate [{(tmpa)CuII}2(μ-N2O22-)]2+ (2), exhibiting temperature-dependent irreversible isomerization to the previously characterized κ2-O,O'-trans-[(tmpa)2Cu2II(μ-N2O22-)]2+ (OOXray) complex. Complementary stopped-flow kinetic analysis of the reaction in MeOH reveals an initial mononitrosyl species [(tmpa)Cu(NO)]+ (1-(NO)) that binds a second NO molecule, forming a dinitrosyl species [(tmpa)CuII(NO)2] (1-(NO)2). The decay of 1-(NO)2 requires an available starting complex 1 to form a dicopper-dinitrosyl species hypothesized to be [{(tmpa)Cu}2(μ-NO)2]2+ (D) bearing a diamond-core motif, en route to the formation of hyponitrite intermediate 2. In contrast, exposing 1 to NO(g) in 2-MeTHF/THF (v/v 4:1) at <-80 °C leads to the newly observed transient metastable dinitrosyl species [(tmpa)CuII(NO)2] (1-(NO)2) prior to its disproportionation-mediated transformation to the nitrite product [(tmpa)CuII(NO2)]+. Our study furnishes a near-complete profile of NO(g) activation at a reduced Cu site with tripodal tetradentate ligation in two distinctly different solvents, aided by detailed spectroscopic characterization of metastable intermediates, including resonance Raman characterization of the new dinitrosyl and hyponitrite species detected.

Exceptionally high and reversible NOx uptake by hollow Mn-Fe composite nanocubes derived from Prussian blue analogues

Noble metal-based catalysts are widely used as passive NO_x adsorbers (PNA) for cold-start NO_x emissions; however, efficient porous materials as an alternative have great development potential. Herein, porous Mn-Fe composites with hollow nanocubes derived from Prussian blue analogue (PBA) precursors were used as PNA. The effects of O₂, the molar ratio of Mn/Fe, calcination temperature and reaction temperature on their adsorption capacity were explored. The physicochemical properties of the obtained catalysts were systematically characterized by XRD, SEM, BET surface area, TGA, XPS and DRIFT techniques. The developed Mn₁Fe₂-450 presented excellent NO_x uptake (more than 2.16 mmol g^-1 at 200 °C). Moreover, a high NO_x adsorption performance was also retained in the presence of 10% water vapor. The existing Mn³⁺ and Fe²⁺ species could contribute to the NO_x adsorption and gaseous O₂ can accelerate NO activation to form more easily adsorbed NO₂. Surface NO₂ is further diffused and stored into the bulk of the Mn-Fe composite in the form of nitrite and nitrate. This work revealed a novel candidate for PNA catalysts, which might provide inspiration for the design of new adsorbent materials.

Influence of Solvent on Selective Catalytic Reduction of Nitrogen Oxides with Ammonia over Cu-CHA Zeolite

The copper-exchanged zeolite Cu-CHA has received considerable attention in recent years, owing to its application in the selective catalytic reduction (SCR) of NO_x species. Here, we study the NH₃-SCR reaction mechanism on Cu-CHA using the hybrid quantum mechanical/molecular mechanical (QM/MM) technique and investigate the effects of solvent on the reactivity of active Cu species. To this end, a comparison is made between water- and ammonia-solvated and bare Cu species. The results show the promoting effect of solvent on the oxidation component of the NH₃-SCR cycle since the formation of important nitrate species is found to be energetically more favorable on the solvated Cu sites than in the absence of solvent molecules. Conversely, both solvent molecules are predicted to inhibit the reduction component of the NH₃-SCR cycle. Diffuse reflectance infrared fourier-transform spectroscopy (DRIFTS) experiments exploiting (concentration) modulation excitation spectroscopy (MES) and phase-sensitive detection (PSD) identified spectroscopic signatures of Cu-nitrate and Cu-nitrosamine (H₂NNO), important species which had not been previously observed experimentally. This is further supported by the QM/MM-calculated harmonic vibrational analysis. Additional insights are provided into the reactivity of solvated active sites and the formation of key intermediates including their formation energies and vibrational spectroscopic signatures, allowing the development of a detailed understanding of the reaction mechanism. We demonstrate the role of solvated active sites and their influence on the energetics of important species that must be explicitly considered for an accurate understanding of NH₃-SCR kinetics.

Reductive NO Coupling at Dicopper Center via a [Cu2(NO)2]2+ Diamond-Core Intermediate

Treatment of a dicopper(I,I) complex with excess amounts of NO leads to the formation of a dicopper dinitrosyl [Cu₂(NO)₂]²⁺ complex capable of (i) releasing two equivalents of NO reversibly in 90% yield and (ii) reacting with another equivalent of NO to afford N₂O and dicopper nitrosyl oxo species [Cu₂(NO)(O)]²⁺. Resonance Raman characterization of the [Cu₂(NO)₂]²⁺ complex shows a ¹⁵N-sensitive N═O stretch at 1527.6 cm^-1 and two Cu-N stretches at 390.6 and 414.1 cm^-1, supporting a symmetric diamond-core structure with bis-μ-NO ligands. The conversion of [Cu₂(NO)₂]²⁺ to [Cu₂(NO)O]²⁺ occurs via a rate-limiting reaction with NO and bypasses the dicopper oxo intermediate, a mechanism distinct from that of diFe-mediated NO reduction to N₂O.

Recent progress in performance optimization of Cu-SSZ-13 catalyst for selective catalytic reduction of NOx

Nitrogen oxides (NO_x), which are the major gaseous pollutants emitted by mobile sources, especially diesel engines, contribute to many environmental issues and harm human health. Selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) is proved to be one of the most efficient techniques for reducing NO_x emission. Recently, Cu-SSZ-13 catalyst has been recognized as a promising candidate for NH₃-SCR catalyst for reducing diesel engine NO_x emissions due to its wide active temperature window and excellent hydrothermal stability. Despite being commercialized as an advanced selective catalytic reduction catalyst, Cu-SSZ-13 catalyst still confronts the challenges of low-temperature activity and hydrothermal aging to meet the increasing demands on catalytic performance and lifetime. Therefore, numerous studies have been dedicated to the improvement of NH₃-SCR performance for Cu-SSZ-13 catalyst. In this review, the recent progress in NH₃-SCR performance optimization of Cu-SSZ-13 catalysts is summarized following three aspects: 1) modifying the Cu active sites; 2) introducing the heteroatoms or metal oxides; 3) regulating the morphology. Meanwhile, future perspectives and opportunities of Cu-SSZ-13 catalysts in reducing diesel engine NO_x emissions are discussed.

The promoting/inhibiting effect of water vapor on the selective catalytic reduction of NOx

In the field of nitrogen oxides (NO_x) abatement, developing selective catalytic reduction (SCR) catalysts that can operate stably in the practical conditions remains a big challenge because of the complexity and uncertainty of actual flue gas emissions. As water vapor is unavoidable in the actual flue gas, it is indispensable to explore its effect on the performance of SCR catalysts. Many studies have proved that the effects of H₂O on de-NO_x activity of SCR catalysts were indeed observed during SCR reactions operated under wet conditions. Whether the effect is promotive or inhibitory depends on the reaction conditions, catalyst types and reducing agents used in SCR reaction. This review focuses on the effect of H₂O on SCR catalysts and SCR reaction, including promoting effect, inhibiting effect, as well as the effecting mechanism. Besides, various strategies for developing a water-resistant SCR catalyst are also included. We hope that this work can give a more comprehensive insight into the effects of H₂O on SCR catalysts and help with the rational design of water-resistant SCR catalysts for further practical application in NO_x abatement field.

Influence of ion mobility on the redox and catalytic properties of Cu ions in zeolites

This contribution aims at analysing the current understanding about the influence of Al distribution, zeolite topology, ligands/reagents and oxidation state on ions mobility in Cu-zeolites, and its relevance toward reactivity of the metal sites. The concept of Cu mobilization has been originally observed in the presence of ammonia, favouring the activation of oxygen by formation of NH3 oxo-bridged complexes in zeolites and opening a new perspective about the chemistry in single-site zeolite-based catalysts, in particular in the context of the NH3-mediated Selective Catalytic Reduction of NO x (NH3-SCR) processes. A different mobility of bare Cu+/Cu2+ ions has been documented too, showing for Cu+ a better mobilization than for Cu2+ also in absence of ligands. These concepts can have important consequences for the formation of Cu-oxo species, active and selective in other relevant reactions, such as the direct conversion of methane to methanol. Here, assessing the structure, the formation pathways and reactivity of Cu-oxo mono- or multimeric moieties still represents a challenging playground for chemical scientists. Translating the knowledge about Cu ions mobility and redox properties acquired in the context of NH3-SCR reaction into the field of direct conversion of methane to methanol can have important implications for a better understanding of transition metal ions redox properties in zeolites and for an improved design of catalysts and catalytic processes.

Review of the application of Cu-containing SSZ-13 in NH3-SCR-DeNO x and NH3-SCO

The reduction of NO x emissions has become one of the most important subjects in environmental protection. Cu-containing SSZ-13 is currently the state-of-the-art catalyst for the selective catalytic reduction of NO x with ammonia (NH3-SCR-DeNO x ). Although the current-generation catalysts reveal enhanced activity and remarkable hydrothermal stability, still open challenges appear. Thus, this review focuses on the progress of Cu-containing SSZ-13 regarding preparation methods, hydrothermal resistance and poisoning as well as reaction mechanisms in NH3-SCR-DeNO x . Remarkably, the paper reviews also the progress of Cu-containing SSZ-13 in the selective ammonia oxidation into nitrogen and water vapor (NH3-SCO). The dynamics in the NH3-SCR-DeNO x and NH3-SCO fields make this review timely.

Determination of Chemical Kinetic Parameters for Adsorption and Desorption of NH3 in Cu-Zeolite Used as a DeNOx SCR Catalyst of Diesel Engines

Ammonia-based selective catalytic reduction is one of the most effective NOx reduction technologies for diesel engines, but its low NOx reduction efficiency under low-temperature conditions needs further improvement. Previous studies have broadened our understanding of the NH3 adsorption and desorption that occurs in an SCR catalyst of Cu ion-exchanged zeolite. However, many studies conducted to data on the control of the NH3 adsorption and desorption in SCR catalysts have considered a simple chemical reaction related to a single acid site. This study demonstrates a detailed process for determining the chemical kinetic parameters of the adsorption and desorption of NH3 for different types of acid sites of a zeolite catalyst. The determined chemical kinetics parameters will be used for more effective control of the SCR system in future studies.

Progress of selective catalytic reduction denitrification catalysts at wide temperature in carbon neutralization

With the looming goal of carbon neutrality and increasingly stringent environmental protection policies, gas purification in coal-fired power plants is becoming more and more intense. To achieve the NOx emission standard when coal-fired power plants are operating at full load, wide-temperature denitrification catalysts that can operate for a long time in the range of 260–420°C are worthy of study. This review focuses on the research progress and deactivation mechanism of selective catalytic reduction (SCR) denitration catalysts applied to a wide temperature range. With the increasing application of SCR catalysts, it also means that a large amount of spent catalysts is generated every year due to deactivation. Therefore, it is necessary to recycle the wide temperature SCR denitration catalyst. The challenges faced by wide-temperature SCR denitration catalysts are summarized by comparing their regeneration processes. Finally, its future development is prospected.

Comparison of Industrial and Lab-Scale Ion Exchange for the DeNOx-SCR Performance of Cu Chabazites: A Case Study

The efficiency and robustness of selective catalytic reduction (SCR) by NH3 catalysts for exhaust gas purification, especially of heavy-duty diesel engines, will continue to play a major role, despite the increasing electrification of powertrains. With that in mind, the effect of the synthesis scale on commercially available Cu-exchanged chabazite catalysts for SCR was investigated through physicochemical characterizations and catalytic tests. During hydrothermal aging, both industrial and lab-scale prepared catalysts underwent structural dealumination of the zeolite framework and redistribution of the Al sites. Although both catalysts demonstrated similar NO conversion activity under SCR conditions, the lab-scale catalyst showed higher selectivity and lower activity in NH3 oxidation. Variations in N2O formation and NH3 oxidation rate were found to correlate with the formation of different copper species, and the compositions become less controllable in industrial-scale process. This case study focused on routes of ion exchange, and the results provide new insights into catalytic performance of the industrially-produced zeolites.

Strikingly distinctive NH3-SCR behavior over Cu-SSZ-13 in the presence of NO2

Commercial Cu-exchanged small-pore SSZ-13 (Cu-SSZ-13) zeolite catalysts are highly active for the standard selective catalytic reduction (SCR) of NO with NH₃. However, their activity is unexpectedly inhibited in the presence of NO₂ at low temperatures. This is strikingly distinct from the NO₂-accelerated NO_x conversion over other typical SCR catalyst systems. Here, we combine kinetic experiments, in situ X-ray absorption spectroscopy, and density functional theory (DFT) calculations to obtain direct evidence that under reaction conditions, strong oxidation by NO₂ forces Cu ions to exist mainly as Cu^II species (fw-Cu²⁺ and NH₃-solvated Cu^II with high CNs), which impedes the mobility of Cu species. The SCR reaction occurring at these Cu^II sites with weak mobility shows a higher energy barrier than that of the standard SCR reaction on dynamic binuclear sites. Moreover, the NO₂-involved SCR reaction tends to occur at the Brønsted acid sites (BASs) rather than the Cu^II sites. This work clearly explains the strikingly distinctive selective catalytic behavior in this zeolite system.

Cu-SSZ-13 zeolites are highly active for standard NH₃-SCR, but their activity is unexpectedly inhibited in the presence of NO₂. This work demonstrates that strong oxidation by NO₂ forces Cu ions to exist mainly as Cu^II species with low mobility, which is responsible for this distinctive behavior.

Unveiling Secondary-Ion-Promoted Catalytic Properties of Cu-SSZ-13 Zeolites for Selective Catalytic Reduction of NOx

The incorporation of secondary metal ions into Cu-exchanged SSZ-13 zeolites could improve their catalytic properties in selective catalytic reduction of NO_x with ammonia (NH₃-SCR), but their essential roles remain unclear at the molecular level. Herein, a series of Cu-Sm-SSZ-13 zeolites have been prepared by ion-exchanging Sm ions followed by Cu ions, which exhibit superior NH₃-SCR performance. The NO conversion of Cu-Sm-SSZ-13 is nearly 10% higher than that of conventional Cu-SSZ-13 (175-250 °C) after hydrothermal ageing, showing an enhanced low-temperature activity. The Sm ions are found to occupy the six-membered rings (6MRs) of SSZ-13 by X-ray diffraction Rietveld refinement and aberration-corrected scanning transmission electron microscopy. The Sm ions at 6MRs can facilitate the formation of more active [ZCu²⁺(OH)]⁺ ions at 8MRs, as revealed by temperature-programmed reduction of hydrogen. X-ray photoelectron spectroscopy and density functional theory (DFT) calculations indicate that there exists electron transfer from Sm³⁺ to [ZCu²⁺(OH)]⁺ ions, which promotes the activity of [ZCu²⁺(OH)]⁺ ions by decreasing the activation energy of the formation of intermediates (NH₄NO₂ and H₂NNO). Meanwhile, the electrostatic interaction between Sm³⁺ and [ZCu²⁺(OH)]⁺ results in a high-reaction energy barrier for transforming [ZCu²⁺(OH)]⁺ ions into inactive CuO_x species, thus enhancing the stability of [ZCu²⁺(OH)]⁺ ions. The influence of the ion-exchanging sequence of Sm and Cu ions into SSZ-13 is further investigated by combining both experiments and theoretical calculations. This work provides a mechanistic insight of secondary ions in regulating the distribution, activity, and stability of Cu active sites, which is helpful for the design of high-performance Cu-SSZ-13 catalysts for the NH₃-SCR reaction.

Assessing the Influence of Zeolite Composition on Oxygen-Bridged Diamino Dicopper(II) Complexes in Cu-CHA DeNOx Catalysts by Machine Learning-Assisted X-ray Absorption Spectroscopy

Cu-exchanged chabazite is the catalyst of choice for NO_x abatement in diesel vehicles aftertreatment systems via ammonia-assisted selective catalytic reduction (NH₃-SCR). Herein, we exploit in situ X-ray absorption spectroscopy powered by wavelet transform analysis and machine learning-assisted fitting to assess the impact of the zeolite composition on NH₃-mobilized Cu-complexes formed during the reduction and oxidation half-cycles in NH₃-SCR at 200 °C. Comparatively analyzing well-characterized Cu-CHA catalysts, we show that the Si/Al ratio of the zeolite host affects the structure of mobile dicopper(II) complexes formed during the oxidation of the [Cu^I(NH₃)₂]⁺ complexes by O₂. Al-rich zeolites promote a planar coordination motif with longer Cu-Cu interatomic distances, while at higher Si/Al values, a bent motif with shorter internuclear separations is also observed. This is paralleled by a more efficient oxidation at a given volumetric Cu density at lower Si/Al, beneficial for the NO_x conversion under NH₃-SCR conditions at 200 °C.

Rate Controlling in Low-Temperature Standard NH3-SCR: Implications from Operando EPR Spectroscopy and Reaction Kinetics

A series of seven Cu/SSZ-13 catalysts with Si/Al = 6.7 are used to elucidate key rate-controlling factors during low-temperature standard ammonia-selective catalytic reduction (NH₃-SCR), via a combination of SCR kinetics and operando electron paramagnetic resonance (EPR) spectroscopy. Strong Cu-loading-dependent kinetics, with Cu atomic efficiency increasing nearly by an order of magnitude, is found when per chabazite cage occupancy for Cu ion increases from ∼0.04 to ∼0.3. This is due mainly to the release of intercage Cu transfer constraints that facilitates the redox chemistry, as evidenced from detailed Arrhenius analysis. Operando EPR spectroscopy studies reveal strong connectivity between Cu-ion dynamics and SCR kinetics, based on which it is concluded that under low-temperature steady-state SCR, kinetically most relevant Cu species are those with the highest intercage mobility. Transient binuclear Cu species are mechanistically relevant species, but their splitting and cohabitation are indispensable for low-temperature kinetics.

In situ spectroscopic studies of the effect of water on the redox cycle of Cu ions in Cu-SSZ-13 during selective catalytic reduction of NOx

The effect of water on the NH₃-assisted selective catalytic reduction of NO_x (NH₃-SCR) has been largely neglected, despite the inevitable presence of water vapor in real emissions produced by fuel combustion. In this work, we investigated the role of water in the behavior of active Cu²⁺ ions in Cu-SSZ-13 in the NH₃-SCR reaction. The addition of water to the reactant feed leads to significantly increased NO_x reduction over the catalyst. By combining in situ DRIFTS and XANES analyses during the NH₃-SCR reaction, we found that the redox cycle of Cu ions is promoted by the presence of water.