Temperature-Responsive Fluorescent Organoplatinum(II) Metallacycles

Supramolecular Control of the Temperature Responsiveness of Fluorescent Macrocyclic Molecular Rotamers

To fully harness the potential of molecular machines, it is crucial to develop methods by which to exert control over their speed of motion through the application of external stimuli. A conformationally strained macrocyclic fluorescent rotamer, CarROT, displays a reproducible and linear fluorescence decrease towards temperature over the physiological temperature range. Through the external addition of anions, cations or through deprotonation, the compound can access four discreet rotational speeds via supramolecular interactions (very slow, slow, fast and very fast) which in turn stop, reduce or enhance the thermoluminescent properties due to increasing or decreasing non-radiative decay processes, thereby providing a means to externally control the temperature sensitivity of the system. Through comparison with analogues with a higher degree of conformational freedom, the high thermosensitivity of CarROT over the physiological temperature range was determined to be due to conformational strain, which causes a high energy barrier to rotation over this range. Analogues with a higher degree of conformational freedom display lower sensitivities towards temperature over the same temperature range. This study provides an example of an information rich small molecule, in which programable rotational speed states can be observed with facile read-out.

Force-triggered hypso- and bathochromic bidirectional fluorescence switching beyond 120 nm and its anticounterfeiting applications

Achieving high-contrast tricolor emissive regulation of a single-component molecule using a single type of external stimulus is highly desirable but challenging. In the present study, we report a symmetric acceptor-donor-acceptor (A-D-A)-type aggregation-induced emission-active luminogen, which displays a sequential high-contrast fluorescence switching just by anisotropic mechanical grinding. Specifically, upon light grinding, an orange-yellow-to-blue hypsochromic mechanofluorochromic response with a distinct color contrast (change in the maximum emission wavelength, Δλem,max = 122 nm) is noticed, and the slightly ground solid exhibits a blue-to-red high-contrast (Δλem,max = 185 nm) bathochromic mechanofluorochromic conversion upon vigorous grinding. Thus, using a single luminogen developed here, we can realize wide-range (Δλem,max > 100 nm) hypso- and bathochromic fluorescence mechanochromisms simultaneously. The tricolored mechanofluorochromic phenomenon is attributed to two different morphological transitions involving crystalline-to-crystalline and crystalline-to-amorphous states. Furthermore, three information anticounterfeiting systems are developed using the luminogen presented here.

A terpyridyl-imidazole based europium tris-(β-diketonate) complex as an efficient molecular luminescent thermometer and single component white light emitter via synergy in energy transfer between ligands and Eu3

The thermosensing and thermochromic behavior of one of our recently reported terpyridyl-imidazole based ternary europium tris-(β-diketonate) complexes of the composition [Eu(tta)3(tpy-HImzphen)] (tta = 2-thenoyltrifluoroacetone and tpy-HImzphen = 2-(4-[2,2':6',2''] terpyridin-4'-yl-phenyl)-1H-phenanthro[9,10-d]imidazole) has been thoroughly investigated in this work. The said Eu(III) complex exhibits magnificent thermosensing as well as thermochromic properties and can be recommended as an excellent temperature sensor in a wide temperature domain of 273-343 K in terms of both emission intensity ratio (Sm = 5.78% K-1 at Tm = 343 K, δT = 0.012 K) and lifetime values (Sm = 3.36% K-1 at Tm = 333 K, δT = 0.009 K) or even in terms of its emitting color (red at 268 K, violet at 303 K, and blue at 343 K). Additionally, it displays remarkable solvent-induced luminescence behavior by displaying various emitting colors instead of its sole characteristic red emission upon varying the nature of the solvent. Finally, amalgamating these two features, we are able to attain white light emission (Commission Internationale de l'Eclairage coordinates: x = 0.34, y = 0.38) at 283 K from a single component. A plausible energy transfer mechanism has also been proposed in light of the existence of the ligand-to-metal charge transfer (LMCT) state as the quencher.

Coordination-Induced Conformational Control Enables Highly Luminescent Metallo-Cages

In recent years, luminescent materials have received a great deal of attention due to their wide range of applications. However, exploring a simple solution to overcome the fluorescence quenching resulting from the aggregation of conventional organic fluorophores remains a valuable area of investigation. In this study, we successfully constructed two metallo-cages, namely, SA and SB, through coordination-driven self-assemblies of the triphenylamine (TPA)-based donor L with different diplatinum(II) acceptors LA and LB, respectively. These metallo-cages take advantage of their steric nature and curved conformation to more effectively limit the free rotation of the benzene ring and hinder π-π stacking in the solid state, which successfully inhibited fluorescence quenching and realizing highly efficient luminescent properties. Therefore, this work offers a new design strategy for preparing materials with excellent luminescent properties.

Homochiral Metallacycle Used as a Stationary Phase for Capillary Gas Chromatographic Separation of Chiral and Achiral Compounds

Metallacycles are a novel class of supramolecular materials with circular structures, internal cavities, and abundant host-guest chemical properties that have exhibited good application prospects in many fields. However, to the best of our knowledge, no research on the use of metallacycles as stationary phases for gas chromatographic (GC) separations has been published yet. In this work, we report for the first time the use of a homochiral metallacycle, [ZnCl2L]2, as a stationary phase for GC separations. [ZnCl2L]2 was synthesized by reaction of (S)-(1-isonicotinoylpyrrolidin-2-yl)methyl-isonicotinate (L) with ZnCl2 via coordination-driven self-assembly. The [ZnCl2L]2-coated column displayed an excellent separation performance not only of organic isomers but also of racemic compounds. Sixteen racemates (including alcohols, esters, amino acid derivatives, ethers, organic acids, and epoxides) and 21 isomeric compounds (including positional, structural, and cis/trans-isomers) were well separated on the [ZnCl2L]2-coated column. Impressively, some racemates were resolved with high resolution values (Rs), including 1,2-butanediol diacetate (Rs = 25.86), ethyl 3-hydroxybutyrate (Rs = 20.97), 1,3-butanediol diacetate (Rs = 18.09), and threonine derivative (Rs = 18.61). Compared with the commercial β-DEX 120 column for separation of the tested racemates, the [ZnCl2L]2-coated column exhibited good enantioseparation complementarity, enabling separation of some racemates that could not be separated, or were not well resolved, by the β-DEX 120 column. In addition, many organic mixtures, such as n-alkanes, alkylbenzenes, n-alcohols, and a Grob test mixture, were also well separated on the [ZnCl2L]2-coated column. The column also has good reproducibility and thermal stability on separation. This work not only reveals the great potential of metallacycles for GC separations but also opens up a new application of metallacycles in separation science.

Near-infrared metal agents assisting precision medicine: from strategic design to bioimaging and therapeutic applications

Metal agents have made incredible strides in preclinical research and clinical applications in recent years, but their short emission/absorption wavelengths continue to be a barrier to their distribution, therapeutic action, visual tracking, and efficacy evaluation. Nowadays, the near-infrared window (NIR, 650-1700 nm) provides a more accurate imaging and treatment option. Thus, there has been ongoing research focusing on developing multifunctional NIR metal agents for imaging and therapy that have deeper tissue penetration. The design, characteristics, bioimaging, and therapy of NIR metal agents are covered in this overview of papers and reports published to date. To start with, we focus on describing the structure, design strategies, and photophysical properties of metal agents from the NIR-I (650-1000 nm) to NIR-II (1000-1700 nm) region, in order of molecular metal complexes (MMCs), metal-organic complexes (MOCs), and metal-organic frameworks (MOFs). Next, the biomedical applications brought by these superior photophysical and chemical properties for more accurate imaging and therapy are discussed. Finally, we explore the challenges and prospects of each type of NIR metal agent for future biomedical research and clinical translation.

Real-Time Temperature Sensing Using a Ratiometric Dual Fluorescent Protein Biosensor

Accurate temperature control within biological and chemical reaction samples and instrument calibration are essential to the diagnostic, pharmaceutical and chemical industries. This is particularly challenging for microlitre-scale reactions typically used in real-time PCR applications and differential scanning fluorometry. Here, we describe the development of a simple, inexpensive ratiometric dual fluorescent protein temperature biosensor (DFPTB). A combination of cycle three green fluorescent protein and a monomeric red fluorescent protein enabled the quantification of relative temperature changes and the identification of temperature discrepancies across a wide temperature range of 4-70 °C. The maximal sensitivity of 6.7% °C^-1 and precision of 0.1 °C were achieved in a biologically relevant temperature range of 25-42 °C in standard phosphate-buffered saline conditions at a pH of 7.2. Good temperature sensitivity was achieved in a variety of biological buffers and pH ranging from 4.8 to 9.1. The DFPTB can be used in either purified or mixed bacteria-encapsulated formats, paving the way for in vitro and in vivo applications for topologically precise temperature measurements.

Photoresponsive reversible self-assembly of rod-coil amphiphiles containing spiropyran groups

Stimuli-responsive assembly deformation is a key feature in constructing smart soft materials, which makes them versatile and autonomous. In this study, rod-coil amphiphilic compounds containing spiropyran (SP) groups were developed and synthesized to investigate their stimuli-responsive assembly in a solution system with 99% water content. In addition to photochromic phenomena, reversible light-mediated morphological alterations occurred in these molecular aggregates. Based on the different flexible chain segments of rod-coil amphiphiles, the initial assemblies underwent a dissociation-reassembly process under ultraviolet (UV) irradiation, whereupon they deformed or disassembled to assemblies. Furthermore, as the UV source was removed, the original nanostructures were gradually recovered again via the ring-closing reaction process. These compounds, interestingly, can selectively combine with copper ions to produce cross-linked co-assembled nanostructures. The copper ion complex solution of rod-coil amphiphilic compounds emitted unique bright blue fluorescence, which allowed for the specific visual identification of copper ions in aqueous solutions.

Solvato-Controlled Assembly and Structural Transformation of Emissive Poly-NHC-Based Organometallic Cages and Their Applications in Amino Acid Sensing and Fluorescence Imaging

Stimuli-induced structural transformation of supramolecular cages has drawn increasing attention because of their sensitive feature to external variations as model systems to simulate biological processes. However, combining structural transformation and useful functions has remained a difficult task. This study reports the solvato-controlled self-assembly of two unique topologies with different emission characteristics, a water-soluble Ag₈ L₄ cage (A) and an Ag₄ L₂ cage (B), produced from the same sulfonate-pendant tetraphenylethene (TPE) bridged tetrakis-(1,2,4-triazolium) ligand. Both cages show interesting solvent-responsive reversible structural transformation, and the change of fluorescence signals can efficiently track the process. Additionally, water-soluble cage A exhibits unique properties in thermochromism, thiol amino acid sensing, and subcellular imaging in aqueous media.

Metal-free FRET macrocycles of perylenediimide and aza-BODIPY for multifunctional sensing

Two multichromophoric FRET macrocycles M1 [1+1] and M2 [2+2] with red emission (λ_em ∼ 721 nm) composed of perylenediimide (PDI) as the energy donor and aza-BODIPY (ABDP) as the energy acceptor were synthesized by click reaction in a metal-free fashion. M1 and M2 exhibited distinct reversible ratiometric temperature responsive emission with temperature sensitivities of 0.09-0.14% °C^-1 and owing to the redox active chromophores, they showed solution phase redox responsive reversible colour changes.

Thermally Controlled Exciplex Fluorescence in a Dynamic Homo[2]catenane

Motion-induced change in emission (MICE) is a phenomenon that can be employed to develop various types of probes, including temperature and viscosity sensors. Although MICE, arising from the conformational motion in particular compounds, has been studied extensively, this phenomenon has not been investigated in depth in mechanically interlocked molecules (MIMs) undergoing coconformational changes. Herein, we report the investigation of a thermoresponsive dynamic homo[2]catenane incorporating pyrene units and displaying relative circumrotational motions of its cyclophanes as evidenced by variable-temperature ¹H NMR spectroscopy and supported by its visualization through molecular dynamics simulations and quantum mechanics calculations. The relative coconformational motions induce a significant change in the fluorescence emission of the homo[2]catenane upon changes in temperature compared with its component cyclophanes. This variation in the exciplex emission of the homo[2]catenane is reversible as demonstrated by four complete cooling and heating cycles. This research opens up possibilities of using the coconformational changes in MIMs-based chromophores for probing fluctuations in temperature which could lead to applications in biomedicine or materials science.

Full-Color and Switchable Circularly Polarized Light from a Macroscopic Chiral Dendritic Film through a Solid-State Supramolecular Assembly

Chiral materials displaying chirality across multiple length scales have attracted increasing interest due to their potential applications in diverse fields. Herein, we report an efficient approach for the construction of macroscopic crystal dendrites with hierarchical chirality based on an in situ solid assembly in a block copolymer film. Chiral fluorescent crystals are formed by enantiopure d-/l-dibenzoyl tartaric acid and pyrenecarboxylic acid in a poly(1,4-butadiene)-b-poly(ethylene oxide) film. The chiro-optical activity of the crystalline dendrites can be greatly amplified in the absorption and scattering regions and goes along with the dimension of dendrites. Notably, the chiral dendrites exhibited strong circularly polarized luminescence emission with a high dissymmetric factor (0.03). The enhancement of the quantum yield of the chiral film was up to 28%, which was 14 times higher that of the corresponding fluorescent molecules. The circularly polarized emission bands of the films can be fine-tuned by contriving the emissive bands of fluorescent molecules. More importantly, the chiral signals are able to be wiped when the fluorescent group photodimerizes under UV irradiation. This work provides an efficient way to develop functional materials through solid self-assembly.

Stereocontrolled Self-Assembly of Ln(III)-Pt(II) Heterometallic Cages with Temperature-Dependent Luminescence

Structurally well-defined discrete d/f heterometallic complexes show diverse application potential in electrooptic and magnetic materials. However, precise control of the component and topology of such heterometallic compounds with fine-tuned photophysical properties is still challenging. Herein, we report the stereocontrolled syntheses of a series of Ln^III-Pt^II heterometallic cages through coordination-driven self-assembly of enantiopure alkynylplatinum-based metalloligands (L₁^R/S, L₂^R/S) with lanthanide ions (Ln = Eu^III, Yb^III, Nd^III, Lu^III). Taking advantage of the metal-to-ligand charge transfer (MLCT) excited state on the designed alkynylplatinum ligands, the excitation window for the sensitized near-infrared (NIR) luminescence on the Yb^III- and Nd^III-containing cages can be extended to the visible region (up to 500 nm). Linear temperature-dependent red and NIR emissions observed on the Ln₄(L₂^R/S)₆ (Ln^III = Eu^III and Yb^III, respectively) complexes suggest their potential applications as luminescent temperature sensors, with sensitivities of -0.54% (Ln^III = Eu^III, 77-250 K) and -0.17% (Ln^III = Yb^III, 77-300 K) per K achieved. This work not only offers a good strategy to prepare new d/f heterometallic supramolecular cages but also paves the way for the design of stimuli-responsive luminescent materials.

Hexaphenylbenzene-Based Deep Blue-Emissive Metallacages as Donors for Light-Harvesting Systems

We herein report the preparation of a series of hexaphenylbenzene (HPB)-based deep blue-emissive metallacages via multicomponent coordination-driven self-assembly. These metallacages feature prismatic structures with HPB derivatives as the faces and tetracarboxylic ligands as the pillars, as evidenced by NMR, mass spectrometry and X-ray diffraction analysis. Light-harvesting systems were further constructed by employing the metallacages as the donor and a naphthalimide derivative (NAP) as the acceptor, owing to their good spectral overlap. The judiciously chosen metallacage serves as the antenna, providing the suitable energy to excite the non-emissive NAP, and thus resulting in bright emission for NAP in the solid state. This study provides a type of HPB-based multicomponent emissive metallacage and explores their applications as energy donors to light up non-emissive fluorophores in the solid state, which will advance the development of emissive metallacages as useful luminescent materials.

Anthracene-Containing Metallacycles and Metallacages: Structures, Properties, and Applications

Due to its highly conjugated panel-like structure and unique photophysical and chemical features, anthracene has been widely used for fabricating attractive and functional supramolecular assemblies, including two-dimensional metallacycles and three-dimensional metallacages. The embedded anthracenes in these assemblies often show synergistic effects on enhancing the desired supramolecular and luminescent properties. This review focuses on the metallasupramolecular architectures with anthracene-containing building blocks, as well as their applications in host-guest chemistry, stimulus response, molecular sensing, light harvesting, and biomedical science.

Light-controlled shape-changing azomacrocycles exhibiting reversible modulation of pyrene fluorescence emission

We report the design, synthesis, and study of light-induced shape-changing azomacrocycles. These systems have been incorporated with azobenzene photoswitches using alkoxy tethers and triazole units to afford flexibility and binding. We envision that such azomacrocycles are capable of reversibly binding with the guest molecule. Remarkably, we have demonstrated fully light-controlled fluorescence quenching and enhancement in the monomeric emission of pyrene (guest). Such modulations have been achieved by the photoisomerization of the azomacrocycle and, in turn, host-guest interactions. Also, the azomacrocycles tend to aggregate and can also be controlled by light or heat. We uncovered such phenomena using spectroscopic, microscopic, and isothermal titration calorimetry (ITC) studies and computations.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Enhanced Biological Imaging via Aggregation-Induced Emission Active Porous Organic Cages

Porous organic cages (POCs) have many advantages, including superior microenvironments, good monodispersity, and shape homogeneity, excellent molecular solubility, high chemical stability, and intriguing host-guest chemistry. These properties enable POCs to overcome the limitations of extended porous networks such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). However, the applications of POCs in bioimaging remain limited due to the problems associated with their rigid and hydrophobic structures, thus leading to strong aggregation-caused quenching (ACQ) in aqueous biological media. To address this challenge, we report the preparation of aggregation-induced emission (AIE)-active POCs capable of stimuli responsiveness for enhanced bioimaging. We rationally design a hydrophilic, structurally flexible tetraphenylethylene (TPE)-based POC that is almost entirely soluble in aqueous solutions. This POC's conformationally flexible superstructure allows the dynamic rotation of the TPE-based phenyl rings, thus endowing impressive AIE characteristics for responses to environmental changes such as temperature and viscosity. We employ these notable features in the bioimaging of living cells and obtain good performance, demonstrating that the present AIE-active POCs are suitable candidates for further biological applications.

Highly Emissive Multipurpose Organoplatinum(II) Metallacycles with Contrasting Mechanoresponsive Features

The development of supramolecular coordination complexes (SCCs) with a bright aggregate state or mechanical-stimuli-responsive luminescence is very significant and challenging. Herein, we report the synthesis of three different supramolecular platinum(II) metallacycles via coordination-driven self-assembly of a diplatinum(II) acceptor and organic donors with a triphenylamine, carbazole, or tetraphenylethylene moiety. The triphenylamine-modified SCC exhibits aggregation-induced emission enhancement (AIEE) but no mechanofluorochromism. The carbazole and tetraphenylethylene-based SCCs exhibit changes in aggregate fluorescence and also exhibit reversible mechanofluorochromism. This work not only reports three rare metallacycles with AIEE, aggregate fluorescence change, or mechanofluorochromic nature but also explores their potential applications in cell imaging and solid-state lighting.

Reversible luminescence tuning behavior in a thermal-stimuli-responsive anthracene-based coordination polymer

A new coordination complex presented a series of structural changes accompanied by photo-fluorescence (PL) changes under different temperature stimuli.

An AIE material with time-dependent luminescence conversion obtained by 2D coordination polymer modification via covalent post-synthetic modification

In this study, we reported the covalent post-synthetic modification (PSM) of a luminescent complex to achieve aggregation-induced emission (AIE), prepared using the Schiff base reaction of TPE-CHO and HLC-NH2, denoted by HLC-NH2-TPE. HLC-NH2 formed a 2D luminescent complex which was constructed using 4,4'-diamino-[1,1'-biphenyl]-2,2'-dicarboxylic acid and zinc ions via a solvothermal reaction. HLC-NH2-TPE inherited the luminescence properties of HLC-NH2 and exhibited noticeable AIE properties in response to environmental viscosities and temperature changes. Interestingly, HLC-NH2-TPE displayed a time-dependent luminescence conversion phenomenon in a mixed solution of DMF/H₂O (v : v/1 : 9).

A Chiral Molecular Cage Comprising Diethynylallenes and N-Heterotriangulenes for Enantioselective Recognition

Chirality, a characteristic tool of molecular recognition in nature, is often a complement of redox active systems. Scientists, in their eagerness to mimic such sophistication, have designed numerous chiral systems based on molecular entities with cavities, such as macrocycles and cages. In an attempt to combine chirality and redox-active species, in this contribution we report the synthesis and detailed characterization of a chiral shape-persistent molecular cage based on the combination of enantiopure diethynylallenes and electron-rich bridged triarylamines, also known as N-heterotriangulenes. Its ability for chiral recognition in solution was revealed through UV/vis titrations with enantiopure helicenes.

Evolution of Supramolecular Systems Towards Next-Generation Biosensors

Supramolecular materials, which rely on dynamic non-covalent interactions, present a promising approach to advance the capabilities of currently available biosensors. The weak interactions between supramolecular monomers allow for adaptivity and responsiveness of supramolecular or self-assembling systems to external stimuli. In many cases, these characteristics improve the performance of recognition units, reporters, or signal transducers of biosensors. The facile methods for preparing supramolecular materials also allow for straightforward ways to combine them with other functional materials and create multicomponent sensors. To date, biosensors with supramolecular components are capable of not only detecting target analytes based on known ligand affinity or specific host-guest interactions, but can also be used for more complex structural detection such as chiral sensing. In this Review, we discuss the advancements in the area of biosensors, with a particular highlight on the designs of supramolecular materials employed in analytical applications over the years. We will first describe how different types of supramolecular components are currently used as recognition or reporter units for biosensors. The working mechanisms of detection and signal transduction by supramolecular systems will be presented, as well as the important hierarchical characteristics from the monomers to assemblies that contribute to selectivity and sensitivity. We will then examine how supramolecular materials are currently integrated in different types of biosensing platforms. Emerging trends and perspectives will be outlined, specifically for exploring new design and platforms that may bring supramolecular sensors a step closer towards practical use for multiplexed or differential sensing, higher throughput operations, real-time monitoring, reporting of biological function, as well as for environmental studies.

Ligand-Triggered Platinum(II) Metallacycle with Mechanochromic and Vapochromic Responses

Supramolecular coordination complexes with solid-state stimuli-responsive characteristics are highly desirable but are rarely reported. Herein, we describe two coordination-driven self-assembled monoanthracene or dianthracene-based hexagonal metallacycles by subtle structure modification. Notably, the dianthracene-containing hexagon 1 exhibits tricolor mechanochromic and vapochromic characteristics, while the monoanthracene-containing hexagon 4 does not show obvious changes toward mechanical force. Further studies have indicated that changes in hexagon 1, especially the ulterior anthracene of hexagon 1 in the molecular stacking through intermolecular interactions toward external stimuli, are responsible for the above behavioral differences. Furthermore, the present work also demonstrates a novel light-harvesting strategy for achieving high-contrast mechanochromic fluorescence involving solid-state energy transfer from hexagon 1 to an organic carbazole derivant 6 without mechanofluorochromism or tetraphenylethylene derivant 7 exhibiting inconspicuous mechanofluorochromism.

Investigation of the Amide Linkages on Cooperative Supramolecular Polymerization of Organoplatinum(II) Complexes

Cooperative supramolecular polymerization of π-conjugated compounds into one-dimensional nanostructures has received tremendous attentions in recent years. It is commonly achieved by incorporating amide linkages into the monomeric structures, which provide hydrogen bonds for intermolecular non-covalent complexation. Herein, the effect of amide linkages is elaborately studied, by comparing supramolecular polymerization behaviors of two structurally similar monomers with the same platinum(II) acetylide cores. As compared to the N-phenyl benzamide linkages, N-[(1S)-1-phenylethyl] benzamide linkages give rise to effective chirality transfer behaviors due to the closer distances between the chiral units and the platinum(II) acetylide core. They also provide stronger intermolecular hydrogen bonding strength, which consequently brings higher thermo-stability and enhanced gelation capability for the resulting supramolecular polymers. Supramolecular polymerization is further strengthened by varying the monomers from monotopic to ditopic structures. Hence, with the judicious modulation of structural parameters, the current study opens up new avenues for the rational design of supramolecular polymeric systems.

A Novel D-A-D Photosensitizer for Efficient NIR Imaging and Photodynamic Therapy

Photodynamic therapy (PDT) has attracted great interest in cancer theranostics owing to its minimal invasiveness and low side effect. In PDT, photosensitizers are indispensable components that generate cytotoxic reactive oxygen species (ROS). Tremendous efforts have been devoted to optimizing the photosensitizer with enhanced ROS efficiency. However, to improve the precision and controllability for PDT, developing NIR imaging-guided photosensitizers are still urgent and challenging. Here, we have designed a novel photosensitizer 2Cz-BTZ which integrated with intense NIR emission and photoinduced singlet oxygen ¹ O₂ generation capabilities. Moreover, after loading the photosensitizers 2Cz-BTZ into biocompatible amphiphilic polymers F127, the formed 2Cz-BTZ@F127 nanoparticles (NPs) exhibited good photoinduced therapy as well as long-term in vivo imaging capabilities. Under these merits, the 2Cz-BTZ@F127 NPs showed NIR imaging-guided PDT, which paves a promising way for spatiotemporally precise tumor theranostics.

Supramolecular Coordination Complexes as Optical Biosensors

In recent years, luminescent supramolecular coordination complexes (SCCs), including 2D-metallacycles and 3D-metallacages have been utilised for biomolecular analysis. Unlike small-molecular probes, the dimensions, size, shape, and flexibility of these complexes can easily be tuned by combining ligands designed with particular geometries, symmetries and denticity with metal ions with strong geometrical binding preferences. The well-defined cavities that result, in combination with the other non-covalent interactions that can be programmed into the ligand design, facilitate great selectivity towards guest binding. In this Review we will discuss the application of luminescent metallacycles and cages in the binding and detection of a wide range of biomolecules, such as carbohydrates, proteins, amino acids, and biogenic amines. We aim to explore the effect of the structural diversity of SCCs on the extent of biomolecular sensing, expressed in terms of sensitivity, selectivity and detection range.

Stimuli responsive multicolour fluorescence emission in carbon nanodots and application in metal free hydrogen evolution from water

The present study convincingly demonstrates visible light induced continuous tuning of the fluorescence of carbon nanodots from yellow to cyan within two hours. These carbon dots are well characterized using field emission gun transmission electron microscopy (FEG-TEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), fluorescence spectroscopy and UV-visible spectroscopy. Moreover, solid state fluorescence of different wavelengths has also been obtained from these colour tunable carbon dots by circumventing the common problem of aggregation induced quenching of fluorescence in the solid state. These carbon dots have also shown a very low band gap and the yellow emissive C-dots have been successfully utilized as a photocathode in metal free photo-electrochemical hydrogen evolution from water.

Dynamic covalent bond constrained ureas for multimode fluorescence switching, thermally induced emission, and chemical signaling cascades

A combination of organic ureas and dynamic covalent chemistry was demonstrated for multistate switching, thermally induced fluorescence, and signaling cascades.

Reversible fluorescence modulation through the photoisomerization of an azobenzene-bridged perylene bisimide cyclophane

An azobenzene-bridged perylene bisimide cyclophane was designed and synthesized, which showed reversible fluorescence intensity switching under light-irradiation due to cooperative adjustments of PBI–PBI and PBI–Azo interactions.

Robust liquid-core nanocapsules as biocompatible and precise ratiometric fluorescent thermometers for living cells

Intracellular thermometry with favorable biocompatibility and precision is essential for insight into temperature-related cellular events. Here, liquid-core nanocapsule ratiometric fluorescent thermometers (LCN-RFTs) were prepared by encapsulating thermosensitive organic fluorophores (N,N'-di(2-ethylhexyl)-3,4,9,10-perylene tetracarboxylic diimide, DEH-PDI) with hydrophobic solvent (2,2,4-trimethylpentane, TMP) into polystyrene/silica hybrid nanoshells. As the fluorescent thermosensitive unit of the LCN-RFT, the TMP solution of DEH-PDI was responsible for the fluorescence response to temperature. Benefitting from the hydrophilic nanoshells, the LCN-RFTs exhibited favorable anti-interference and biocompatibility. Furthermore, the LCN-RFTs showed an excellent precision of 0.02 °C-0.10 °C in a simulated physiological environment from 10.00 °C to 90.00 °C, and were employed to realize intracellular thermometry with an outstanding precision of 0.06 °C-0.14 °C. This work provides a feasible method of using hydrophobic organic fluorophores for intracellular thermometry by encapsulating them into nanocapsules.

Recent developments in the construction and applications of platinum-based metallacycles and metallacages via coordination

Coordination-driven suprastructures have attracted much interest due to their unique properties. Among these structures, platinum-based architectures have been broadly studied due to their facile preparation. The resultant two- or three-dimensional (2D or 3D) systems have many advantages over their precursors, such as improved emission tuning, sensitivity as sensors, and capture and release of guests, and they have been applied in biomedical diagnosis as well as in catalysis. Herein, we review the recent results related to platinum-based coordination-driven self-assembly (CDSA), and the text is organized to emphasizes both the synthesis of new metallacycles and metallacages and their various applications.

Nanoimprint Lithography-Directed Self-Assembly of Bimetallic Iron-M (M=Palladium, Platinum) Complexes for Magnetic Patterning

Self-assembly of d⁸ metal polypyridine systems is a well-established approach for the creation of 1D organometallic assemblies but there are still challenges for the large-scale construction of nanostructured patterns from these building blocks. We describe herein the use of high-throughput nanoimprint lithography (NIL) to direct the self-assembly of the bimetallic complexes [4'-ferrocenyl-(2,2':6',2''-terpyridine)M(OAc)]⁺ (OAc)^- (M=Pd or Pt; OAc=acetate). Uniform nanorods are fabricated from the molecular self-organization and evidenced by morphological characterization. More importantly, when top-down NIL is coupled with the bottom-up self-assembly of the organometallic building blocks, regular arrays of nanorods can be accessed and the patterns can be controlled by changing the lithographic stamp, where the mold imposes a confinement effect on the nanorod growth. In addition, patterns consisting of the products formed after pyrolysis are studied. The resulting arrays of ferromagnetic FeM alloy nanorods suggest promising potential for the scalable production of ordered magnetic arrays and fabrication of magnetic bit-patterned media.

Stable and Well-Organized Near-Infrared Platinum(II)-Acetylide-Based Metallacycles-Mediated Cancer Phototherapy

The development of metallacycles with high stability and intense near-infrared (NIR) absorption is important for biomedical applications. However, very few molecular design strategies have been developed on such metallacycles. Herein, we report a new series of stable and well-defined NIR-absorbing metallacycles (M1-M3) through the Pt-acetylide coordination with highly efficient photoconversion performance for cancer phototherapy. The metallacycles showed high stability and strong NIR absorption, and the absorption peaks were red shifted approximately 30 nm in comparison with their corresponding precursors. The introduction of Pt into metallacycles promotes significant photoconversions, including the singlet-to-triplet and nonradiative transitions. Moreover, the fabricated M3 nanoparticles (M3-NPs) showed favorable photoconversions into both thermal effect and singlet oxygen generation upon NIR irradiation, achieving tumor ablation. This novel design of Pt-acetylide metallacycles possesses not only complex topological architectures but also a valuable paradigm for precise cancer phototherapy, which is important for grafting stimuli-responsive functional groups into metallacycles for the development of high-performance biomedical supramolecular materials.

Ratiometric dual fluorescence tridurylboron thermometers with tunable measurement ranges and colors

Noncontact ratiometric fluorescent thermometers have received great interests in recent years. Besides being a sensitive and easily observable detection signal, the ratiometric dual fluorescence are also highly accurate and resistable to interference. However, organic molecular thermometers with such fluorescence property are very rare, and their measurement ranges and colors are limited. In this work, a series of ratiometric dual fluorescent tridurylboron thermometers, with tunable measurement ranges and colors, are designed and synthesized. The measurement ranges of the thermometers are -20 °C-40 °C, -10 °C-50 °C and -25 °C-30 °C in solid polymeric systems, and -50 °C-100 °C and -30 °C-110 °C in liquid organic solvent. With decreasing temperature, the fluorescence colors of tridurylboron-MOE thermometers are from green yellow to yellow red, green to green yellow, blue to green. This study provides a novel strategy for developing tunable ratiometric dual fluoresence organic molecular thermometers.