Preparation of 1T′-Phase ReS2xSe2(1-x) (x = 0–1) Nanodots for Highly Efficient Electrocatalytic Hydrogen Evolution Reaction

Phase Engineering of Nanomaterials: Transition Metal Dichalcogenides

Crystal phase, a critical structural characteristic beyond the morphology, size, dimension, facet, etc., determines the physicochemical properties of nanomaterials. As a group of layered nanomaterials with polymorphs, transition metal dichalcogenides (TMDs) have attracted intensive research attention due to their phase-dependent properties. Therefore, great efforts have been devoted to the phase engineering of TMDs to synthesize TMDs with controlled phases, especially unconventional/metastable phases, for various applications in electronics, optoelectronics, catalysis, biomedicine, energy storage and conversion, and ferroelectrics. Considering the significant progress in the synthesis and applications of TMDs, we believe that a comprehensive review on the phase engineering of TMDs is critical to promote their fundamental studies and practical applications. This Review aims to provide a comprehensive introduction and discussion on the crystal structures, synthetic strategies, and phase-dependent properties and applications of TMDs. Finally, our perspectives on the challenges and opportunities in phase engineering of TMDs will also be discussed.

Electrocatalytic Activation in ReSe2-VSe2 Alloy Nanosheets to Boost Water-Splitting Hydrogen Evolution Reaction

It is challenging to control the electronic structure of 2D transition metal dichalcogenides (TMD) for extended applications in renewable energy devices. Here, ReSe2-VSe2 (Re1- xVxSe2) alloy nanosheets over the whole composition range via a colloidal reaction is synthesized. Increasing x makes the nanosheets more metallic and induces a 1T″-to-1T phase transition at x = 0.5-0.6. Compared to the MoSe2-VSe2 and WSe2-VSe2 alloy nanosheets, ReSe2 and VSe2 are mixed more homogeneously at the atomic scale. The alloy nanosheets at x = 0.1-0.7 exhibit an enhanced electrocatalytic activity toward acidic hydrogen evolution reaction (HER). In situ X-ray absorption fine structure measurements reveal that alloying caused the Re and V atoms to be synergically more active in the HER. Gibbs free energy (ΔGH*) and density of state calculations confirm that alloying and Se vacancies effectively activate the metal sites toward HER. The composition dependence of HER performance is explained by homogenous atomic mixing with the increased Se vacancies. The study provides a strategy for designing new TMD alloy nanosheets with enhanced catalytic activity.

Recent Strategies for the Synthesis of Phase-Pure Ultrathin 1T/1T' Transition Metal Dichalcogenide Nanosheets

The past few decades have witnessed a notable increase in transition metal dichalcogenide (TMD) related research not only because of the large family of TMD candidates but also because of the various polytypes that arise from the monolayer configuration and layer stacking order. The peculiar physicochemical properties of TMD nanosheets enable an enormous range of applications from fundamental science to industrial technologies based on the preparation of high-quality TMDs. For polymorphic TMDs, the 1T/1T' phase is particularly intriguing because of the enriched density of states, and thus facilitates fruitful chemistry. Herein, we comprehensively discuss the most recent strategies for direct synthesis of phase-pure 1T/1T' TMD nanosheets such as mechanical exfoliation, chemical vapor deposition, wet chemical synthesis, atomic layer deposition, and more. We also review frequently adopted methods for phase engineering in TMD nanosheets ranging from chemical doping and alloying, to charge injection, and irradiation with optical or charged particle beams. Prior to the synthesis methods, we discuss the configuration of TMDs as well as the characterization tools mostly used in experiments. Finally, we discuss the current challenges and opportunities as well as emphasize the promising fields for the future development.

Atomically Substitutional Engineering of Transition Metal Dichalcogenide Layers for Enhancing Tailored Properties and Superior Applications

Transition metal dichalcogenides (TMDs) are a promising class of layered materials in the post-graphene era, with extensive research attention due to their diverse alternative elements and fascinating semiconductor behavior. Binary MX2 layers with different metal and/or chalcogen elements have similar structural parameters but varied optoelectronic properties, providing opportunities for atomically substitutional engineering via partial alteration of metal or/and chalcogenide atoms to produce ternary or quaternary TMDs. The resulting multinary TMD layers still maintain structural integrity and homogeneity while achieving tunable (opto)electronic properties across a full range of composition with arbitrary ratios of introduced metal or chalcogen to original counterparts (0-100%). Atomic substitution in TMD layers offers new adjustable degrees of freedom for tailoring crystal phase, band alignment/structure, carrier density, and surface reactive activity, enabling novel and promising applications. This review comprehensively elaborates on atomically substitutional engineering in TMD layers, including theoretical foundations, synthetic strategies, tailored properties, and superior applications. The emerging type of ternary TMDs, Janus TMDs, is presented specifically to highlight their typical compounds, fabrication methods, and potential applications. Finally, opportunities and challenges for further development of multinary TMDs are envisioned to expedite the evolution of this pivotal field.

Defect engineering of 1T'MX2(M= Mo, W andX= S, Se) transition metal dichalcogenide-based electrocatalyst for alkaline hydrogen evolution reaction

The alkaline electrolyzer (AEL) is a promising device for green hydrogen production. However, their energy conversion efficiency is currently limited by the low performance of the electrocatalysts for the hydrogen evolution reaction (HER). As such, the electrocatalyst design for the high-performance HER becomes essential for the advancement of AELs. In this work, we used both hydrogen (H) and hydroxyl (OH) adsorption Gibbs free energy changes as the descriptors to investigate the catalytic HER performance of 1T' transition metal dichalcogenides (TMDs) in an alkaline solution. Our results reveal that the pristine sulfides showed better alkaline HER performance than their selenide counterparts. However, the activities of all pristine 1T' TMDs are too low to dissociate water. To improve the performance of these materials, defect engineering techniques were used to design TMD-based electrocatalysts for effective HER activity. Our density functional theory results demonstrate that introducing single S/Se vacancy defects can improve the reactivities of TMD materials. Yet, the desorption of OH becomes the rate-determining step. Doping defective MoS2with late 3d transition metal (TM) atoms, especially Cu, Ni, and Co, can regulate the reactivity of active sites for optimal OH desorption. As a result, the TM-doped defective 1T' MoS2can significantly enhance the alkaline HER performance. These findings highlight the potential of defect engineering technologies for the design of TMD-based alkaline HER electrocatalysts.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Facile and Scalable Mechanochemical Synthesis of Defective MoS2 with Ru Single Atoms Toward High-Current-Density Hydrogen Evolution

Designing a facile strategy to prepare catalysts with highly active sites are challenging for large-scale implementation of electrochemical hydrogen production. Herein, a straightforward and eco-friendly method by high-energy mechanochemical ball milling for mass production of atomic Ru dispersive in defective MoS2 catalysts (Ru1 @D-MoS2 ) is developed. It is found that single atomic Ru doping induces the generation of S vacancies, which can break the electronic neutrality around Ru atoms, leading to an asymmetrical distribution of electrons. It is also demonstrated that the Ru1 @D-MoS2 exhibits superb alkaline hydrogen evolution enhancement, possibly attributing to this electronic asymmetry. The overpotential required to deliver a current density of 10 mA cm-2 is as low as 107 mV, which is much lower than that of commercial MoS2 (C-MoS2 , 364 mV). Further density functional theory (DFT) calculations also support that the vacancy-coupled single Ru enables much higher electronic distribution asymmetry degree, which could regulate the adsorption energy of intermediates, favoring the water dissociation and the adsorption/desorption of H*. Besides, the long-term stability test under 500 mA cm-2 further confirms the robust performance of Ru1 @D-MoS2 . Our strategy provides a promising and practical way towards large-scale preparation of advanced HER catalysts for commercial applications.

Atomic-Level Regulated 2D ReSe2 : A Universal Platform Boostin Photocatalysis

Solar hydrogen (H₂ ) generation via photocatalytic water splitting is practically promising, environmentally benign, and sustainably carbon neutral. It is important therefore to understand how to controllably engineer photocatalysts at the atomic level. In this work, atomic-level engineering of defected ReSe₂ nanosheets (NSs) is reported to significantly boost photocatalytic H₂ evolution on various semiconductor photocatalysts including TiO₂ , CdS, ZnIn₂ S₄ , and C₃ N₄ . Advanced characterizations, such as atomic-resolution aberration-corrected scanning transmission electron microscopy (AC-STEM), synchrotron-based X-ray absorption near edge structure (XANES), in situ X-ray photoelectron spectroscopy (XPS), transient-state surface photovoltage (SPV) spectroscopy, and transient-state photoluminescence (PL) spectroscopy, together with theoretical computations confirm that the strongly coupled ReSe₂ /TiO₂ interface and substantial atomic-level active sites of defected ReSe₂ NSs result in the significantly raised activity of ReSe₂ /TiO₂ . This work not only for the first time realizes the atomic-level engineering of ReSe₂ NSs as a versatile platform to significantly raise the activities on different photocatalysts, but, more importantly, underscores the immense importance of atomic-level synthesis and exploration on 2D materials for energy conversion and storage.

Vacancy impacts on electronic and mechanical properties of MX2 (M = Mo, W and X = S, Se) monolayers

Monolayers of transition metal dichalcogenides (TMD) exhibit excellent mechanical and electrical characteristics. Previous studies have shown that vacancies are frequently created during the synthesis, which can alter the physicochemical characteristics of TMDs. Even though the properties of pristine TMD structures are well studied, the effects of vacancies on the electrical and mechanical properties have received far less attention. In this paper, we applied first-principles density functional theory (DFT) to comparatively investigate the properties of defective TMD monolayers including molybdenum disulfide (MoS₂), molybdenum diselenide (MoSe₂), tungsten disulfide (WS₂), and tungsten diselenide (WSe₂). The impacts of six types of anion or metal complex vacancies were studied. According to our findings, the electronic and mechanical properties are slightly impacted by anion vacancy defects. In contrast, vacancies in metal complexes considerably affect their electronic and mechanical properties. Additionally, the mechanical properties of TMDs are significantly influenced by both their structural phases and anions. Specifically, defective diselenides become more mechanically unstable due to the comparatively poor bonding strength between Se and metal based on the analysis of the crystal orbital Hamilton population (COHP). The outcomes of this study may provide the theoretical knowledge base to boost more applications of the TMD systems through defect engineering.

Electron-Extraction Engineering Induced 1T''-1T' Phase Transition of Re0.75 V0.25 Se2 for Ultrafast Sodium Ion Storage

Inducing new phases of transition metal dichalcogenides by controlling the d-electron-count has attracted much interest due to their novel structures and physicochemical properties. 1T'' ReSe₂ is a promising candidate for sodium storage, but the low electronic conductivity and limited active sites hinder its electrochemical capacity. Herein, new-phase 1T' Re_0.75 V_0.25 Se₂ crystals (P2/m) with zig-zag chains are successfully synthesized. The 1T''-1T' phase transition results from the electronic reorganization of 5d orbitals via electron extraction after V-atom doping. The electrical conductivity of 1T' Re_0.75 V_0.25 Se₂ is 2.7 × 10⁵ times higher than that of 1T'' ReSe₂ . Moreover, density functional theory (DFT) calculations reveal that 1T' Re_0.75 V_0.25 Se₂ has a larger interlayer spacing, lower bonding energy, and migration energy barrier for Na⁺ ions than 1T'' ReSe₂ . As a result, 1T' Re_0.75 V_0.25 Se₂ electrode shows an excellent rate capability of 203 mAh g^-1 at 50 C with no capacity fading over 5000 cycles for sodium storage, which is superior to most reported sodium-ion anode materials. This 1T' Re_0.75 V_0.25 Se₂ provides a new platform for various applications such as electronics, catalysis, and energy storage.

Vacancy Defects in 2D Transition Metal Dichalcogenide Electrocatalysts: From Aggregated to Atomic Configuration

Vacancy defect engineering has been well leveraged to flexibly shape comprehensive physicochemical properties of diverse catalysts. In particular, growing research effort has been devoted to engineering chalcogen anionic vacancies (S/Se/Te) of 2D transition metal dichalcogenides (2D TMDs) toward the ultimate performance limit of electrocatalytic hydrogen evolution reaction (HER). In spite of remarkable progress achieved in the past decade, systematic and in-depth insights into the state-of-the-art vacancy engineering for 2D-TMDs-based electrocatalysis are still lacking. Herein, this review delivers a full picture of vacancy engineering evolving from aggregated to atomic configurations covering their development background, controllable manufacturing, thorough characterization, and representative HER application. Of particular interest, the deep-seated correlations between specific vacancy regulation routes and resulting catalytic performance improvement are logically clarified in terms of atomic rearrangement, charge redistribution, energy band variation, intermediate adsorption-desorption optimization, and charge/mass transfer facilitation. Beyond that, a broader vision is cast into the cutting-edge research fields of vacancy-engineering-based single-atom catalysis and dynamic structure-performance correlations across catalyst service lifetime. Together with critical discussion on residual challenges and future prospects, this review sheds new light on the rational design of advanced defect catalysts and navigates their broader application in high-efficiency energy conversion and storage fields.

Scalable-doped Nanoporous 1T″ ReSe2 via a General Surface Co-Alloy Strategy

Reliable and controllable doping of 2D transition metal dichalcogenides is an efficient approach to tailor their physicochemical properties and expand their functional applications. However, precise control over dopant distribution and scalability of the process remains a challenge. Here, we report a general method to achieve scalable in situ doping of centimeter-sized bicontinuous nanoporous ReSe₂ films with transition metal atoms via surface coalloy growth. The distinct strains induced by the bending curvature of nanoporous structures and uniform dopants result in a local 1T' to 1T″ structure phase transition over nanoporous ReSe₂ films. The as-prepared nanoporous Ru-ReSe₂ with high 1T″ phase exhibits preferable electrochemical activity in hydrogen evolution reaction. The work demonstrates a unique and general approach to synthesize uniformly-doped transition metal dichalcogenides with 3D bicontinuous nanoporous structure, which can be scaled up to batch production for various applications.

Synergistic Effects in Ultrafine Molybdenum-Tungsten Bimetallic Carbide Hollow Carbon Architecture Boost Hydrogen Evolution Catalysis and Lithium-Ion Storage

Constructing hierarchical heterostructures is considered a useful strategy to regulate surface electronic structure and improve the electrochemical kinetics. Herein, the authors develop a hollow architecture composed of MoC_{1- x} and WC_{1- x} carbide nanoparticles and carbon matrix for boosting electrocatalytic hydrogen evolution and lithium ions storage. The hybridization of ultrafine nanoparticles confined in the N-doped carbon nanosheets provides an appropriate hydrogen adsorption free energy and abundant boundary interfaces for lithium intercalation, leading to the synergistically enhanced composite conductivity. As a proof of concept, the as-prepared catalyst exhibits outstanding and durable electrocatalytic performance with a low overpotential of 103 and 163 mV at 10 mA cm^-2 , as well as a Tafel slope of 58 and 90 mV dec^-1 in alkaline electrolyte and acid electrolyte, respectively. Moreover, evaluated as an anode for a lithium-ion battery, the as-resulted sample delivers a rate capability of 1032.1 mA h g^-1 at 0.1 A g^-1 . This electrode indicates superior cyclability with a capability of 679.1 mA h g^-1 at 5 A g^-1 after 4000 cycles. The present work provides a strategy to design effective and stable bimetallic carbide composites as superior electrocatalysts and electrode materials.

Atomic and structural modifications of two-dimensional transition metal dichalcogenides for various advanced applications

Two-dimensional (2D) transition metal dichalcogenides (TMDs) and their heterostructures have attracted significant interest in both academia and industry because of their unusual physical and chemical properties. They offer numerous applications, such as electronic, optoelectronic, and spintronic devices, in addition to energy storage and conversion. Atomic and structural modifications of van der Waals layered materials are required to achieve unique and versatile properties for advanced applications. This review presents a discussion on the atomic-scale and structural modifications of 2D TMDs and their heterostructures via post-treatment. Atomic-scale modifications such as vacancy generation, substitutional doping, functionalization and repair of 2D TMDs and structural modifications including phase transitions and construction of heterostructures are discussed. Such modifications on the physical and chemical properties of 2D TMDs enable the development of various advanced applications including electronic and optoelectronic devices, sensing, catalysis, nanogenerators, and memory and neuromorphic devices. Finally, the challenges and prospects of various post-treatment techniques and related future advanced applications are addressed.

Surface Design Strategy of Catalysts for Water Electrolysis

Hydrogen, a new energy carrier that can replace traditional fossil fuels, is seen as one of the most promising clean energy sources. The use of renewable electricity to drive hydrogen production has very broad prospects for addressing energy and environmental problems. Therefore, many researchers favor electrolytic water due to its green and low-cost advantages. The electrolytic water reaction comprises the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Understanding the OER and HER mechanisms in acidic and alkaline processes contributes to further studying the design of surface regulation of electrolytic water catalysts. The OER and HER catalysts are mainly reviewed for defects, doping, alloying, surface reconstruction, crystal surface structure, and heterostructures. Besides, recent catalysts for overall water splitting are also reviewed. Finally, this review paves the way to the rational design and synthesis of new materials for highly efficient electrocatalysis.

Room-Temperature Ferroelectricity in 1T^{'}-ReS_{2} Multilayers

van der Waals materials possess an innate layer degree of freedom and thus are excellent candidates for exploring emergent two-dimensional ferroelectricity induced by interlayer translation. However, despite being theoretically predicted, experimental realization of this type of ferroelectricity is scarce at the current stage. Here, we demonstrate robust sliding ferroelectricity in semiconducting 1T^{'}-ReS_{2} multilayers via a combined study of theory and experiment. Room-temperature vertical ferroelectricity is observed in two-dimensional 1T^{'}-ReS_{2} with layer number N≥2. The electric polarization stems from the uncompensated charge transfer between layers and can be switched by interlayer sliding. For bilayer 1T^{'}-ReS_{2}, the ferroelectric transition temperature is estimated to be ∼405  K from the second harmonic generation measurements. Our results highlight the importance of interlayer engineering in the realization of atomic-scale ferroelectricity.

Reinvestigating oxygen adsorption on Ag(111) by using strongly constrained and appropriately normed semi-local density functional with the revised Vydrov van Voorhis van der Waals force correction

While density functional theory (DFT) at the generalized gradient approximation (GGA) level has made great success in catalysis, it fails in some important systems such as the adsorption of the oxygen molecule on the Ag(111) surface. Previous DFT studies at the GGA level revealed theoretical inconsistencies on the adsorption energies and dissociation barriers of O₂ on Ag(111) in comparison with the experimental conclusion. In this study, the strongly constrained and appropriately normed-revised Vydrov van Voorhis van der Waals correction functional (SCAN-rVV10) method at the meta-GGA level with the nonlocal van der Waals (vdW) force correction was used to reinvestigate the adsorption properties of O₂ on the Ag(111) surface. The SCAN-rVV10 results successfully confirm the experimental observation that both molecular and dissociative adsorptions can exist for oxygen on Ag(111). The calculated adsorption energy for the physisorption state and the relevant dissociation energy barrier are close to the experimental data. It demonstrates that SCAN-rVV10 can outperform functionals at the GGA level for O₂/Ag(111). Therefore, our findings suggest that SCAN-rVV10 can be the desired method for systems where the correct description of intermediate-ranged vdW forces is essential, such as the physisorption of small molecules on the solid surface.

Nanodots Derived from Layered Materials: Synthesis and Applications

Layered 2D materials, such as graphene, transition metal dichalcogenides, transition metal oxides, black phosphorus, graphitic carbon nitride, hexagonal boron nitride, and MXenes, have attracted intensive attention over the past decades owing to their unique properties and wide applications in electronics, catalysis, energy storage, biomedicine, etc. Further reducing the lateral size of layered 2D materials down to less than 10 nm allows for preparing a new class of nanostructures, namely, nanodots derived from layered materials. Nanodots derived from layered materials not only can exhibit the intriguing properties of nanodots due to the size confinement originating from the ultrasmall size, but also can inherit some unique properties of ultrathin layered 2D materials, making them promising candidates in a wide range of applications, especially in biomedicine and catalysis. Here, a comprehensive summary on the materials categories, advantages, synthesis methods, and potential applications of these nanodots derived from layered materials is provided. Finally, personal insights about the challenges and future directions in this promising research field are also given.

Monolayer 1T and 1T' MoSO as Promising Electrocatalyst for Hydrogen Evolution based on First Principle Calculations

Molybdenum disulfide (MoS₂ ) has been regarded as one of the most promising candidates for replacing Pt group noble metals as an efficient electrocatalyst to enhance the hydrogen evolution reaction (HER) in consideration of its relatively high earth abundance. Recent studies show that the catalytic efficiency of MoS₂ for HER can be promoted by the presence of 1T-phase MoS₂ . It is hard to precisely control the formation of 1T-MoS₂ , however, due to its metastability relative to 2H-MoS₂ . Elevating the stability of 1T phase allotrope is therefore of great importance and could be realized by replacing divalent S with monovalent elements or groups according to crystal field theory, which has been demonstrated through our first-principles density functional theory (DFT) calculation results. Differential Gibbs free energy analysis for hydrogen adsorption (ΔG_H* ) suggest that 1T and 1T' MoSO (O doped MoS₂ ) might be taken as potential candidate catalysts for HER process with better performance than 1T and 1T' MoS₂ . We also propose a probable approach to synthesize 1T and 1T' MoSO under oxidation circumstance environment of graphene oxide.

High-Yield Exfoliation of Ultrathin 2D Ni3 Cr2 P2 S9 and Ni3 Cr2 P2 Se9 Nanosheets

Multinary layered 2D nanomaterials can exhibit distinct physicochemical properties and innovative applications as compared to binary 2D nanomaterials due to their unique crystal structures. However, it still remains a challenge for the high-yield preparation of high-quality multinary 2D nanosheets. Here, the high-yield and large-scale production of two quaternary metal thiophosphate nanosheets are reported, i.e., Ni₃ Cr₂ P₂ S₉ and Ni₃ Cr₂ P₂ Se₉ , via the liquid exfoliation of their layered bulk crystals. The exfoliated single-crystalline Ni₃ Cr₂ P₂ S₉ nanosheets, with a lateral size ranging from a few hundred nanometers to a few micrometers and thickness of 1.4 ± 0.2 nm, can be easily used to prepare flexible thin films via a simple vacuum filtration process. As a proof-of-concept application, the fabricated thin film is used as a supercapacitor electrode with good specific capacitance. These high-yield, large-scale, solution-processable quaternary metal thiophosphate nanosheets could also be promising in other applications like biosensors, cancer therapies, and flexible electronics.

Activating Layered Metal Oxide Nanomaterials via Structural Engineering as Biodegradable Nanoagents for Photothermal Cancer Therapy

Layered metal oxides including MoO₃ and WO₃ have been widely explored for biological applications owing to their excellent biocompatibility, low toxicity, and easy preparation. However, they normally exhibit weak or negligible near-infrared (NIR) absorption and thus are inefficient for photo-induced biomedical applications. Herein, the structural engineering of layered MoO₃ and WO₃ nanostructures is first reported to activate their NIR-II absorption for efficient photothermal cancer therapy in the NIR-II window. White-colored micrometre-long MoO₃ nanobelts are transformed into blue-colored short, thin, defective, interlayer gap-expanded MoO_3-x nanobelts with a strong NIR-II absorption via the simple lithium treatment. The blue MoO_3-x nanobelts exhibit a large extinction coefficient of 18.2 L g^-1  cm^-1 and high photothermal conversion efficiency of 46.9% at 1064 nm. After surface modification, the MoO_3-x nanobelts can be used as a robust nanoagent for photoacoustic imaging-guided photothermal therapy to achieve efficient cancer cell ablation and tumor eradication under irradiation by a 1064 nm laser. Importantly, the biodegradable MoO_3-x nanobelts can be rapidly degraded and excreted from body. The study highlights that the structural engineering of layered metal oxides is a powerful strategy to tune their properties and thus boost their performances in given applications.

Modulating electronic structure of metal-organic frameworks by introducing atomically dispersed Ru for efficient hydrogen evolution

Developing high-performance electrocatalysts toward hydrogen evolution reaction is important for clean and sustainable hydrogen energy, yet still challenging. Herein, we report a single-atom strategy to construct excellent metal-organic frameworks (MOFs) hydrogen evolution reaction electrocatalyst (NiRu0.13-BDC) by introducing atomically dispersed Ru. Significantly, the obtained NiRu0.13-BDC exhibits outstanding hydrogen evolution activity in all pH, especially with a low overpotential of 36 mV at a current density of 10 mA cm-2 in 1 M phosphate buffered saline solution, which is comparable to commercial Pt/C. X-ray absorption fine structures and the density functional theory calculations reveal that introducing Ru single-atom can modulate electronic structure of metal center in the MOF, leading to the optimization of binding strength for H2O and H*, and the enhancement of HER performance. This work establishes single-atom strategy as an efficient approach to modulate electronic structure of MOFs for catalyst design.

Phase Evolution of Re1-xMoxSe2 Alloy Nanosheets and Their Enhanced Catalytic Activity toward Hydrogen Evolution Reaction

Two-dimensional ReSe₂ has emerged as a promising electrocatalyst for the hydrogen evolution reaction (HER), but its catalytic activity needs to be further improved. Herein, we synthesized Re_1-xMo_xSe₂ alloy nanosheets with the whole range of x (0-100%) using a hydrothermal reaction. The phase evolved in the order of 1T″ (triclinic) → 1T' (monoclinic) → 2H (hexagonal) upon increasing x. In the nanosheets with x = 10%, the substitutional Mo atoms tended to aggregate in the 1T″ ReSe₂ phase with Se vacancies. The incorporation of the 1T' phase makes the alloy nanosheets more metallic than the end compositions. The 10% Mo substitution significantly enhanced the electrocatalytic performance toward HER (in 0.5 M H₂SO₄), with a current of 10 mA cm^-2 at an overpotential of 77 mV (vs RHE) and a Tafel slope of 42 mV dec^-1. First-principles calculations of the three phases (1T″, 2H, and 1T') predicted a phase transition of 1T″-2H at x ≈ 65% as well as the production of a 1T' phase along the composition tuning, which are consistent with the experiments. At x = 12.5%, two Mo atoms prefer to form a pair along the Re₄ chains. Gibbs free energy along the reaction path indicates that the best HER performance of nanosheets with 10% Mo originates from the Mo atoms that form Mo-H when there are adjacent Se vacancies.

Adatom Doping of Transition Metals in ReSe2 Nanosheets for Enhanced Electrocatalytic Hydrogen Evolution Reaction

Two-dimensional Re dichalcogenide nanostructures are promising electrocatalysts for the hydrogen evolution reaction (HER). Herein, we report the adatom doping of various transition metals (TM = Mn, Fe, Co, Ni, and Cu) in ReSe₂ nanosheets synthesized using a solvothermal reaction. As the atomic number of TM increases from Mn to Cu, the adatoms on Re sites become more favored over the substitution. In the case of Ni, the fraction of adatoms reaches 90%. Ni doping resulted in the most effective enhancement in the HER catalytic performance, which was characterized by overpotentials of 82 and 109 mV at 10 mA cm^-2 in 0.5 M H₂SO₄ and 1 M KOH, respectively, and the Tafel slopes of 54 and 81 mV dec^-1. First-principles calculations predicted that the adatom doping structures (TMs on Re sites) have higher catalytic activity compared with the substitution ones. The adsorbed H atoms formed a midgap hybridized state via direct bonding with the orbitals of TM adatom. The present work provides a deeper understanding into how TM doping can provide the catalytically active sites in these ReSe₂ nanosheets.

Nanoscale engineering and Mo-doping of 2D ultrathin ReS2 nanosheets for remarkable electrocatalytic hydrogen generation

Two-dimensional (2D) lamellar ReS2 nanosheets are considered a promising electrocatalyst for the hydrogen evolution reaction (HER) but suffer from poor intrinsic conductivity and catalytically inert basal planes. In this work, sub 50 nm hierarchical Mo-doped ReS2 nanospheres consisting of numerous few-layered and defect-rich nanosheets are designed and synthesized as robust and efficient HER catalysts. On the one hand, the small size of the hierarchical structure, the disordered basal planes and the expanded interlayer endow the nanosheets with plentiful defects, thereby resulting in abundant exposed active sites. On the other hand, Mo-doping offers the nanosheets with some electronic benefits of unsaturated electrons, improved intrinsic conductivity, and optimized hydrogen adsorption free energy (ΔGH) of the basal planes. Owing to the synergistic effects, the 10%Mo-ReS2 catalyst exhibits an optimized catalytic activity with striking kinetic metrics of a small Tafel slope of 62 mV dec-1, a low overpotential of 81 mV at 10 mA cm-2, and a long operation stability of 50 h, and its performance is among the best of ReS2-based catalysts. This work provides a new approach for gaining the structural and electronic benefits of ReS2 catalysts by combinational nanoscale engineering and heteroatom doping.

Nanoporous V-Doped Ni5P4 Microsphere: A Highly Efficient Electrocatalyst for Hydrogen Evolution Reaction at All pH

Hydrogen economy is one of the most promising candidates to replace the current energy system on depleting fossil fuels. As a clean and sustainable way to produce hydrogen, electrocatalytic water splitting attracts ever-increasing interest from the research community. Although the wide application of platinum group metal (PGM) catalysts is limited because of the scarcity and high cost toward hydrogen evolution reaction (HER), the non-PGM electrocatalysts usually suffer from unsatisfactory activity and poor durability. In this work, we report an active and durable V-doped Ni₅P₄ electrocatalyst that can be used for all-pH HER. Particularly, V-Ni₅P₄ has an HER activity that is comparable to that of Pt in preferred alkaline media, with overpotentials as low as 13 mV and 295 mV at current densities of 10 and 1000 mA cm^-2, respectively. The low-cost V-Ni₅P₄ that enables ultrahigh current density (i.e., at the level of A cm^-2) would be of great interest to the hydrogen production industry.

Hydrogen-Etched Bifunctional Sulfur-Defect-Rich ReS2 /CC Electrocatalyst for Highly Efficient HER and OER

The design on synthesizing a sturdy, low-cost, clean, and sustainable electrocatalyst, as well as achieving high performance with low overpotential and good durability toward water splitting, is fairly vital in environmental and energy-related subject. Herein, for the first time the growth of sulfur (S) defect engineered self-supporting array electrode composed of metallic Re and ReS₂ nanosheets on carbon cloth (referred as Re/ReS₂ /CC) via a facile hydrothermal method and the following thermal treatment with H₂ /N₂ flow is reported. It is expected that, for example, the as-prepared Re/ReS₂ -7H/CC for the electrocatalytic hydrogen evolution reaction (HER) under acidic medium affords a quite low overpotential of 42 mV to achieve a current density of 10 mA cm^-2 and a very small Tafel slope of 36 mV decade^-1 , which are comparable to some of the promising HER catalysts. Furthermore, in the two-electrode system, a small cell voltage of 1.30 V is recorded under alkaline condition. Characterizations and density functional theory results expound that the introduced S defects in Re/ReS₂ -7H/CC can offer abundant active sites to advantageously capture electron, enhance the electron transport capacity, and weaken the adsorption free energy of H* at the active sites, being responsible for its superior electrocatalytic performance.

Surface-Induced 2D/1D Heterostructured Growth of ReS2/CoS2 for High-Performance Electrocatalysts

Two-dimensional/one-dimensional (2D/1D) heterostructures have received much attention from researchers for their abundant catalytically active sites and low contact resistance due to formation of chemical bonds at the interface. The investigation of such heterostructures, however, is confined to lattice-matched materials, which severely limits the material candidates. Herein, we demonstrate a lattice-mismatched 2D/1D heterostructured electrocatalyst consisting of 2D ReS₂ nanosheets and 1D CoS₂ nanowires. We propose that the higher surface energy of the CoS₂ nanowire and the lattice mismatch between 1D and 2D units are crucial for the growth process of ReS₂ nanosheets. More importantly, the terminal S^2- exposed on the surface of CoS₂ nanowires serves not only as the nucleus of ReS₂ nanosheets but also as a bridge to enhance electron transport efficiency. Thus, the ReS₂/CoS₂ heterostructures show outstanding hydrogen evolution reaction performance. This work is of general interest for the design of complex multidimensional nano-heterostructures with outstanding functionalities.

Dual-Enhanced Doping in ReSe2 for Efficiently Photoenhanced Hydrogen Evolution Reaction

Rhenium dichalcogenides (ReX2, X = S or Se) are catalysts that have great promise for the photoenhanced hydrogen evolution reaction (PE-HER) because of their unique physiochemical properties. However, the catalytic performance is still restricted by their low concentration of electrocatalytic activity sites and poor injection of hot electrons. Herein, dual-enhancement in ReSe2 nanosheets (NSs) with high concentration of active sites and efficient use of hot electrons is simultaneously achieved with moderate Mo doping. Contributions from exposed catalytically active sites, improved electrical conductivity, and enhanced solar spectral response are systematically investigated. Superior PE-HER catalytical performance is obtained in Re0.94Mo0.06Se2, which has more catalytically active sites and optimized band structure than other Re1- x Mo x Se2 samples. Here, it is demonstrated that only doping can reduce the overpotential (η10) from 239 to 174 mV at -10 mA cm-2 (Δ1η10 = 65 mV). Then, η10 is further improved to 137 mV under simulated AM 1.5 sun illumination (Δ2η10 = 37 mV). The total improvement (Δη10) toward PE-HER is 102 mV (Δ1η10 + Δ2η10 = 102 mV) in optimal Re0.94Mo0.06Se2. This work presents a new perspective for researching high-efficiency photoenhanced HER ReSe2-based electrocatalysts and other layered transition metal dichalcogenides.

Optimized Metal Chalcogenides for Boosting Water Splitting

Electrocatalytic water splitting (2H2O → 2H2 + O2) is a very promising avenue to effectively and environmentally friendly produce highly pure hydrogen (H2) and oxygen (O2) at a large scale. Different materials have been developed to enhance the efficiency for water splitting. Among them, chalcogenides with unique atomic arrangement and high electronic transport show interesting catalytic properties in various electrochemical reactions, such as the hydrogen evolution reaction, oxygen evolution reaction, and overall water splitting, while the control of their morphology and structure is of vital importance to their catalytic performance. Herein, the general synthetic methods are summarized to prepare metal chalcogenides and different strategies are designed to improve their catalytic performance for water splitting. The remaining challenges in the research and development of metal chalcogenides and possible directions for future research are also summarized.

Effect of Structural Phases on Mechanical Properties of Molybdenum Disulfide

Molybdenum disulfide (MoS₂) is a promising layer-structured material for use in many applications due to its tunable structural and electronic properties in terms of its structural phases. Its performance including efficiency and durability is often dependent on its mechanical properties. To understand the effects of the structural phase on its mechanical properties, a comparative study on the mechanical properties of bulk 2H, 3R, 1T, and 1T' MoS₂ was conducted using the first-principles density functional theory. Since considerable applications of MoS₂ are developed through strain engineering, the impact of the external pressure on its mechanical properties was also considered. Our results suggest a strong relationship between the mechanical properties of MoS₂ and the structural symmetry of its crystal. Accordingly, the impacts of the external pressure on the mechanical properties of MoS₂ also greatly vary with respect to the structural phases. Among all of the considered phases, the 2H and 3R MoS₂ have a larger bulk modulus, Young's modulus, shear modulus, and microhardness due to their higher stability. Conversely, 1T and 1T' MoS₂ are less strong. As such, 1T and 1T' MoS₂ can be a better candidate for strain engineering.

Structural-Phase Catalytic Redox Reactions in Energy and Environmental Applications

The structure-property engineering of phase-based materials for redox-reactive energy conversion and environmental decontamination nanosystems, which are crucial for achieving feasible and sustainable energy and environment treatment technology, is discussed. An exhaustive overview of redox reaction processes, including electrocatalysis, photocatalysis, and photoelectrocatalysis, is given. Through examples of applications of these redox reactions, how structural phase engineering (SPE) strategies can influence the catalytic activity, selectivity, and stability is constructively reviewed and discussed. As observed, to date, much progress has been made in SPE to improve catalytic redox reactions. However, a number of highly intriguing, unresolved issues remain to be discussed, including solar photon-to-exciton conversion efficiency, exciton dissociation into active reductive/oxidative electrons/holes, dual- and multiphase junctions, selective adsorption/desorption, performance stability, sustainability, etc. To conclude, key challenges and prospects with SPE-assisted redox reaction systems are highlighted, where further development for the advanced engineering of phase-based materials will accelerate the sustainable (active, reliable, and scalable) production of valuable chemicals and energy, as well as facilitate environmental treatment.

Efficient and Stable Solar Hydrogen Generation of Hydrophilic Rhenium-Disulfide-Based Photocatalysts via Chemically Controlled Charge Transfer Paths

Effective charge separation and rapid transport of photogenerated charge carriers without self-oxidation in transition metal dichalcogenide photocatalysts are required for highly efficient and stable hydrogen generation. Here, we report that a molecular junction as an electron transfer path toward two-dimensional rhenium disulfide (2D ReS₂) nanosheets from zero-dimensional titanium dioxide (0D TiO₂) nanoparticles induces high efficiency and stability of solar hydrogen generation by balanced charge transport of photogenerated charge carriers. The molecular junctions are created through the chemical bonds between the functionalized ReS₂ nanosheets (e.g., -COOH groups) and -OH groups of two-phase TiO₂ (i.e., ReS₂-C₆H₅C(═O)-O-TiO₂ denoted by ReS₂-BzO-TiO₂). This enhances the chemical energy at the conduction band minimum of ReS₂ in ReS₂-BzO-TiO₂, leading to efficiently improved hydrogen reduction. Through the molecular junction (a Z-scheme charge transfer path) in ReS₂-BzO-TiO₂, recombination of photogenerated charges and self-oxidation of the photocatalyst are restrained, resulting in a high photocatalytic activity (9.5 mmol h^-1 per gram of ReS₂ nanosheets, a 4750-fold enhancement compared to bulk ReS₂) toward solar hydrogen generation with high cycling stability of more than 20 h. Our results provide an effective charge transfer path of photocatalytic TMDs by preventing self-oxidation, leading to increases in photocatalytic durability and a transport rate of the photogenerated charge carriers.

On-chip electrocatalytic microdevice: an emerging platform for expanding the insight into electrochemical processes

This comprehensive summary of on-chip electrocatalytic microdevices will expand the insight into electrochemical processes, ranging from dynamic exploration to performance optimization.

Theoretical Understanding of Electrocatalytic Hydrogen Production Performance by Low-Dimensional Metal-Organic Frameworks on the Basis of Resonant Charge-Transfer Mechanisms

The exploration of low-cost and efficient electrocatalysts for the hydrogen evolution reaction (HER) is a prerequisite for large-scale hydrogen fuel generation. The understanding of the electronic properties of electrocatalysts plays a key role in this exploration process. In this study, our first-principles results demonstrate that the catalytic performance of the 1D metal-organic frameworks (MOFs) can be significantly influenced by engineering the composite of the metal node. Using the Gibbs free energy of the adsorption of hydrogen atoms as a key descriptor, we found that Ni- and Cr-based dithiolene MOFs possess better hydrogen evolution performance, and the much different efficiencies can be ascribed to their electronic resonance structures [TM³⁺(L^2-)(L^2-)]^- ↔ [TM²⁺(L^•-)(L^2-)]^-. The [TM²⁺(L^•-)(L^2-)]^- structure is preferred due to the higher activity of the catalytic site L with more radical features, and the stabilized [TM²⁺(L^•-)(L^2-)]^- structure of the Cr- and Ni-based MOFs can be ascribed to the electronic configurations of their TM²⁺ cations with half-occupied and fully occupied valence orbitals. Our results therefore reveal a novel strategy for optimizing the electronic structures of materials on the basis of the resonant charge-transfer mechanism for their practical applications.

Se-Incorporation Stabilizes and Activates Metastable MoS2 for Efficient and Cost-Effective Water Gas Shift Reaction

Although the water gas shift (WGS) reaction has sparked intensive attention for the production of high-purity hydrogen, the design of cost-efficient catalysts with noble metal-like performance still remains a great challenge. Here, we successfully overcome this obstacle by using Se-incorporated MoS₂ with a 1T phase. Combining the optimized electronic structure, additional active sites from edge sites, and a sulfur vacancy based on the 1T phase, as well as the high surface ratio from the highly open structure, the optimal MoS_1.75Se_0.25 exhibits superior activity and stability compared to the conventional 2H-phase MoS₂, with poor activity, large sulfur loss, and rapid inactivation. The hydrogen production of MoS_1.75Se_0.25 is 942 μmol, which is 1.9 times higher than MoS₂ (504 μmol) and 2.8 times higher than MoSe₂ (337 μmol). Furthermore, due to the lattice stabilization via Se-incorporation, MoS_1.75Se_0.25 exhibited excellent long-term stability without obvious change in more than 10 reaction rounds. Our results demonstrate a pathway to design efficient and cost-efficient catalysts for WGS.

Particulate Photocatalysts for Light-Driven Water Splitting: Mechanisms, Challenges, and Design Strategies

Solar-driven water splitting provides a leading approach to store the abundant yet intermittent solar energy and produce hydrogen as a clean and sustainable energy carrier. A straightforward route to light-driven water splitting is to apply self-supported particulate photocatalysts, which is expected to allow solar hydrogen to be competitive with fossil-fuel-derived hydrogen on a levelized cost basis. More importantly, the powder-based systems can lend themselves to making functional panels on a large scale while retaining the intrinsic activity of the photocatalyst. However, all attempts to generate hydrogen via powder-based solar water-splitting systems to date have unfortunately fallen short of the efficiency values required for practical applications. Photocatalysis on photocatalyst particles involves three sequential steps: (i) absorption of photons with higher energies than the bandgap of the photocatalysts, leading to the excitation of electron-hole pairs in the particles, (ii) charge separation and migration of these photoexcited carriers, and (iii) surface chemical reactions based on these carriers. In this review, we focus on the challenges of each step and summarize material design strategies to overcome the obstacles and limitations. This review illustrates that it is possible to employ the fundamental principles underlying photosynthesis and the tools of chemical and materials science to design and prepare photocatalysts for overall water splitting.

W2C nanodot-decorated CNT networks as a highly efficient and stable electrocatalyst for hydrogen evolution in acidic and alkaline media

Although tungsten carbide (W2C) has long been reported as an excellent platinum-like catalyst, it is still a challenge to synthesize W2C as an electrocatalyst for a highly efficient hydrogen evolution reaction (HER) due to its high onset overpotential, inevitable aggregation, and lack of a scalable and controllable synthesis method. Herein, we synthesized W2C nanodot-decorated CNT networks (W2C@CNT-S) via a facile and scalable spray drying method followed by a carbonization process. It is demonstrated that this unique nanoarchitecture, constructed by ultrafine W2C nanodots homogeneously decorated on a three-dimensional and conductive CNT skeleton, leads to the exposure of abundant catalytic sites and promotes highly efficient electron transfer and ion diffusion during the HER process. As a result, in acidic and alkaline media, the optimized W2C@CNT-S hybrid exhibited excellent HER performance with very low onset overpotentials of only 60 and 40 mV (vs. RHE) and very small Tafel slopes of 57.4 and 56.2 mV dec-1, and only needed 176 and 148 mV (vs. RHE) to obtain a current density of 10 mA cm-2, respectively; it also showed outstanding long-term durability even after a 30-hour test in both acidic and alkaline media. This study presents an overview of a low-cost and scalable spray-drying strategy to synthesize a high-performance carbide-based electrocatalyst for hydrogen evolution.