Carbon Dioxide-Mediated C(sp3)-H Arylation of Amine Substrates

Native Amino Group Directed Meta-Selective C-H Arylation of Primary Amines Via Pd/Norbornene Catalysis

The selective functionalization of remote C-H bonds in free primary amines holds significant promise for the late-stage diversification of pharmaceuticals. However, to date, the direct functionalization of the meta position of amine substrates lacking additional directing groups remains underexplored. In this Letter, we present a successful meta-C-H arylation of free primary amine derivatives using aryl iodides, resulting in synthetically valuable yields. This meta-selective C-H functionalization is achieved through a sequence involving native amino-directed Pd-catalyzed seven-membered cyclometalation, followed by the utilization of a norbornene-type transient mediator.

Ligand-Enabled Palladium(II)-Catalyzed γ-C(sp3)-H Arylation of Primary Aliphatic Amines

The Pd(II)/sulfoxide-2-hydroxypyridine catalytic system shows promising activity in C-H activation chemistry. In this study, we showcase how this catalytic system solves the problem of native primary amine-directed γ-C(sp3)-H arylation. Primary amines with different complexities are compatible with the established methodology, and the range of applicable substrates can be expanded to include pyridine, oxime ether, and pyridine N-oxide.

CO2 Transient Promotion Function Enabled the Selective Electrochemical Transformation of Imines

An unprecedented transient promotion function (TPF) of CO2 in the electrochemical hydrogenation/deuteration of imines (especially α-iminonitriles) is reported. The TPF influence of CO2 results from the introduction of CO2 that disperses the negative charges of the imine radical anion intermediate. The resulting redistribution of electrons leads to a lower reduction potential of the CO2-substituted imine radical anion and thus facilitates the succeeding one-electron reduction. CO2 is finally released via spontaneous decarboxylation to complete the transient promotion process.

Selective C-H Activation of Unprotected Allylamines by Control of Catalyst Speciation

An outstanding challenge in the Pd-catalyzed functionalization of allylamines is the control of stereochemistry. Terminal alkenes preferentially undergo Heck-type reactions, while internal alkenes may undergo a mixture of Heck and C-H activation reactions that give mixtures of stereochemical products. In the case of unprotected allylamines, the challenge in achieving C-H activation is that facile in situ formation of Pd nanoparticles leads to preferential formation of trans rather than cis-substituted products. In this study we have demonstrated the feasibility of using mono-protected amino acid (MPAA) ligands as metal protecting groups to prevent aggregation and reduction, allowing the selective synthesis of free cis-arylated allylamines. This method complements Heck-selective methods, allowing complete stereochemical control over the synthesis of cinnamylamines, an important class of amine that can serve as therapeutics directly or as advanced intermediates. To highlight the utility of the methodology, we have demonstrated rapid access to mu opioid receptor ligands.

A phase transition reduces the threshold for nicotinamide mononucleotide-based activation of SARM1, an NAD(P) hydrolase, to physiologically relevant levels

Axonal degeneration is a hallmark feature of neurodegenerative diseases. Activation of the NAD(P)ase sterile alpha and toll-interleukin receptor motif containing protein 1 (SARM1) is critical for this process. In resting neurons, SARM1 activity is inhibited, but upon damage, SARM1 is activated and catalyzes one of three NAD(P)+ dependent reactions: (1) NAD(P)+ hydrolysis to form ADP-ribose (ADPR[P]) and nicotinamide; (2) the formation of cyclic-ADPR (cADPR[P]); or (3) a base exchange reaction with nicotinic acid (NA) and NADP+ to form NA adenine dinucleotide phosphate. Production of these metabolites triggers axonal death. Two activation mechanisms have been proposed: (1) an increase in the nicotinamide mononucleotide (NMN) concentration, which leads to the allosteric activation of SARM1, and (2) a phase transition, which stabilizes the active conformation of the enzyme. However, neither of these mechanisms have been shown to occur at the same time. Using in vitro assay systems, we show that the liquid-to-solid phase transition lowers the NMN concentration required to activate the catalytic activity of SARM1 by up to 140-fold. These results unify the proposed activation mechanisms and show for the first time that a phase transition reduces the threshold for NMN-based SARM1 activation to physiologically relevant levels. These results further our understanding of SARM1 activation and will be important for the future development of therapeutics targeting SARM1.

SARM1, an Enzyme Involved in Axon Degeneration, Catalyzes Multiple Activities through a Ternary Complex Mechanism

Sterile alpha and toll/interleukin receptor (TIR) motif containing protein 1 (SARM1) is an NAD+ hydrolase and cyclase involved in axonal degeneration. In addition to NAD+ hydrolysis and cyclization, SARM1 catalyzes a base exchange reaction between nicotinic acid (NA) and NADP+ to generate NAADP, which is a potent calcium signaling molecule. Herein, we describe efforts to characterize the hydrolysis, cyclization, and base exchange activities of TIR-1, the Caenorhabditis elegans ortholog of SARM1; TIR-1 also catalyzes NAD(P)+ hydrolysis and/or cyclization and regulates axonal degeneration in worms. We show that the catalytic domain of TIR-1 undergoes a liquid-to-solid phase transition that regulates not only the hydrolysis and cyclization reactions but also the base exchange reaction. We define the substrate specificities of the reactions, demonstrate that cyclization and base exchange reactions occur within the same pH range, and establish that TIR-1 uses a ternary complex mechanism. Overall, our findings will aid drug discovery efforts and provide insight into the mechanism of recently described inhibitors.

Native Amino Group Directed Site-Selective ε-C(sp2)-H Iodination of Primary Amines

Selective remote C-H activating amines using unmodified NH₂ as a native directing group demonstrate compelling synthetic utilities. The 3-arylpropan-1-amine moiety is present in many drugs and candidates in clinical trials. Selective iodination of 3-arylpropan-1-amines on remote aryl rings gives valuable intermediates for modifying bioactive molecules and synthesizing quinolones. Here we report the first palladium-catalyzed selective ε-C(sp²)-H iodination of free 3-arylpropan-1-amines via a seven-membered palladacycle.

PdII-Catalyzed γ-C(sp3)-H (Hetero)Arylation of Ketones Enabled by Transient Directing Groups

Pd(II)-catalyzed γ-C(sp3)-H (hetero)arylation of aliphatic ketones is developed using α-amino acid as transient directing groups (TDG). A variety of aliphatic ketones were (hetero)arylated at the γ-position via a 5,6-membered fused cyclopalladation intermediate to afford the remotely arylated products in up to 88% yield. The crucial ligand effect of 2-pyridone is further enhanced by reducing the loading of acid additives. Consequentially, the improved reactivity of this catalytic system has also made possible the cyclic γ-methylene C(sp3)-H arylation of ketones. Mechanistic investigtigation and comparison to the γ-C-H arylation of aldehydes revealed a structural insight for designing site selective TDG.

Carbon dioxide enhances sulphur-selective conjugate addition reactions

Sulphur-selective conjugate addition reactions play a central role in synthetic chemistry and chemical biology. A general tool for conjugate addition reactions should provide high selectivity in the presence of competing nucleophilic functional groups, namely nitrogen nucleophiles. We report CO₂-mediated chemoselective S-Michael addition reactions where CO₂ can reversibly control the reaction pHs, thus providing practical reaction conditions. The increased chemoselectivity for sulphur-alkylation products was ascribed to CO₂ as a temporary and traceless protecting group for nitrogen nucleophiles, while CO₂ efficiently provide higher conversion and selectivity sulphur nucleophiles on peptides and human serum albumin (HSA) with various electrophiles. This method offers simple reaction conditions for cysteine modification reactions when high chemoselectivity is required.

Ligand-promoted palladium-catalyzed β-methylene C-H arylation of primary aldehydes

The transient directing group (TDG) strategy allowed long awaited access to the direct β-C(sp³)-H functionalization of unmasked aliphatic aldehydes via palladium catalysis. However, the current techniques are restricted to terminal methyl functionalization, limiting their structural scopes and applicability. Herein, we report the development of a direct Pd-catalyzed methylene β-C-H arylation of linear unmasked aldehydes by using 3-amino-3-methylbutanoic acid as a TDG and 2-pyridone as an external ligand. Density functional theory calculations provided insights into the reaction mechanism and shed light on the roles of the external and transient directing ligands in the catalytic transformation.

Palladium(II)-Catalyzed Selective Arylation of Tertiary C-H Bonds of Cyclobutylmethyl Ketones Using Transient Directing Groups

We report the first example of selective PdII -catalyzed tertiary C-H activation of cyclobutylmethyl ketones using a transient directing group. An electron-deficient 2-pyridone ligand was identified as the optimal external ligand to enable tertiary C-H activation. A variety of cyclobutylmethyl ketones bearing quaternary carbon centers was readily accessed without preinstalling internal directing groups in up to 81 % yield and >95 : 5 regioisomeric ratios of tertiary C-H arylation to β-methylene (β-methyl) or γ-C-H arylation.

Pd-catalysed C-H functionalisation of free carboxylic acids

Pd-catalysed C-H functionalisation of free carboxylic acids has drawn significant attention over the last few years due to the predominance of carboxylic acid moieties in pharmaceuticals and agrochemicals. But their coordinating ability was overlooked and masked by exogenous directing groups for a long time. Even other crucial roles of carboxylic acids as additives and steric inducers that directly influence the mode of a reaction have been widely neglected. This review aims to embrace all of the diverse aspects of carboxylic acids except additive and steric effects by concisely and systematically describing their versatile role in Pd-catalysed proximal and distal C-H activation reactions that could be implemented in the pharmaceutical and agrochemical industries. In addition, the mechanistic perspectives along with several recent strategies developed in the last few years discussed here will serve as educational resources for future research.

Diastereoselective palladium-catalyzed functionalization of prochiral C(sp3)-H bonds of aliphatic and alicyclic compounds

We highlight the reported developments of the palladium-catalyzed C-H activation and functionalization of the inactive/unreactive prochiral C(sp³)-H bonds of aliphatic and alicyclic compounds. There exist numerous classical methods for generating contiguous stereogenic centers in a compound with a high degree of stereocontrol. Along similar lines, the Pd(II)-catalyzed, directing group-aided functionalization of inactive prochiral/diastereotopic C(sp³)-H bonds have been exploited to accomplish the stereoselective construction of stereo-arrays in organic compounds. We present a concise discussion on how specific strategies consisting of Pd(II)-catalyzed, directing group-aided C(sp³)-H functionalization have been utilized to generate two or more stereogenic centers in aliphatic and alicyclic compounds.

Recent Developments for the Deuterium and Tritium Labeling of Organic Molecules

Organic compounds labeled with hydrogen isotopes play a crucial role in numerous areas, from materials science to medicinal chemistry. Indeed, while the replacement of hydrogen by deuterium gives rise to improved absorption, distribution, metabolism, and excretion (ADME) properties in drugs and enables the preparation of internal standards for analytical mass spectrometry, the use of tritium-labeled compounds is a key technique all along drug discovery and development in the pharmaceutical industry. For these reasons, the interest in new methodologies for the isotopic enrichment of organic molecules and the extent of their applications are equally rising. In this regard, this Review intends to comprehensively discuss the new developments in this area over the last years (2017-2021). Notably, besides the fundamental hydrogen isotope exchange (HIE) reactions and the use of isotopically labeled analogues of common organic reagents, a plethora of reductive and dehalogenative deuteration techniques and other transformations with isotope incorporation are emerging and are now part of the labeling toolkit.

Zn(II)-Functionalized COF as a Recyclable Catalyst for the Sustainable Synthesis of Cyclic Carbonates and Cyclic Carbamates from Atmospheric CO2

A simple covalent organic framework (COF) bearing β-ketoenamine units as a potential heterogeneous ligand for ZnII-catalyzed fixation and transformation of CO2 into value-added chemicals is reported. Catalytic investigations convincingly demonstrated...

Amine-Directed Mizoroki-Heck Arylation of Free Allylamines

The transition metal-catalyzed Mizoroki−Heck reaction is a powerful method to synthesize C–C bonds, allowing access to several important pharmaceuticals. Traditionally free amines have not been compatible with these approaches due...

Transition-Metal-Catalyzed, Coordination-Assisted Functionalization of Nonactivated C(sp3)-H Bonds

Transition-metal-catalyzed, coordination-assisted C(sp³)-H functionalization has revolutionized synthetic planning over the past few decades as the use of these directing groups has allowed for increased access to many strategic positions in organic molecules. Nonetheless, several challenges remain preeminent, such as the requirement for high temperatures, the difficulty in removing or converting directing groups, and, although many metals provide some reactivity, the difficulty in employing metals outside of palladium. This review aims to give a comprehensive overview of coordination-assisted, transition-metal-catalyzed, direct functionalization of nonactivated C(sp³)-H bonds by covering the literature since 2004 in order to demonstrate the current state-of-the-art methods as well as the current limitations. For clarity, this review has been divided into nine sections by the transition metal catalyst with subdivisions by the type of bond formation. Synthetic applications and reaction mechanism are discussed where appropriate.

Direct Deamination of Primary Amines via Isodiazene Intermediates

We report here a reaction that selectively deaminates primary amines and anilines under mild conditions and with remarkable functional group tolerance including a range of pharmaceutical compounds, amino acids, amino sugars, and natural products. An anomeric amide reagent is uniquely capable of facilitating the reaction through the intermediacy of an unprecedented monosubstituted isodiazene intermediate. In addition to dramatically simplifying deamination compared to existing protocols, our approach enables strategic applications of iminium and amine-directed chemistries as traceless methods. Mechanistic and computational studies support the intermedicacy of a primary isodiazene which exhibits an unexpected divergence from previously studied secondary isodiazenes, leading to cage-escaping, free radical species that engage in a chain, hydrogen-atom transfer process involving aliphatic and diazenyl radical intermediates.

Transient Directing Groups in Metal-Organic Cooperative Catalysis

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C-H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.

Pd-catalysed β-selective C(sp3)-H arylation of simple amides

An efficient Pd-catalysed β-C(sp³)-H arylation of diverse native amides with aryl iodides was developed. This protocol overcomes the necessity of the Thorpe-Ingold effect and features broad substrate scope and good functional group tolerance. The potential application of this protocol is collectively demonstrated by gram-scale synthesis and the synthesis of several bioactive molecules.

Palladium-Catalyzed γ,γ'-Diarylation of Free Alkenyl Amines

The direct difunctionalization of alkenes is an effective way to construct multiple C-C bonds in one-pot using a single functional group. The regioselective dicarbofunctionalization of alkenes is therefore an important area of research to rapidly obtain complex organic molecules. Herein, we report a palladium-catalyzed γ,γ'-diarylation of free alkenyl amines through interrupted chain walking for the synthesis of Z-selective alkenyl amines. Notably, while 1,3-dicarbofunctionalization of allyl groups is well precedented, the present disclosure allows 1,3-dicarbofunctionalization of highly substituted allylamines to give highly Z-selective trisubsubstituted olefin products. This cascade reaction operates via an unprotected amine-directed Mizoroki-Heck (MH) pathway featuring a β-hydride elimination to selectively chain walk to furnish a new terminal olefin which then generates the cis-selective alkenyl amines around the sterically crowded allyl moiety. This operationally simple protocol is applicable to a variety of cyclic, branched, and linear secondary and tertiary alkenylamines, and has a broad substrate scope with regard to the arene coupling partner as well. Mechanistic studies have been performed to help elucidate the mechanism, including the presence of a likely unproductive side C-H activation pathway.

C-H Activation: Toward Sustainability and Applications

Since the definition of the "12 Principles of Green Chemistry" more than 20 years ago, chemists have become increasingly mindful of the need to conserve natural resources and protect the environment through the judicious choice of synthetic routes and materials. The direct activation and functionalization of C-H bonds, bypassing intermediate functional group installation is, in abstracto, step and atom economic, but numerous factors still hinder the sustainability of large-scale applications. In this Outlook, we highlight the research areas seeking to overcome the sustainability challenges of C-H activation: the pursuit of abundant metal catalysts, the avoidance of static directing groups, the replacement of metal oxidants, and the introduction of bioderived solvents. We close by examining the progress made in the subfield of aryl C-H borylation from its origins, through highly efficient but precious Ir-based systems, to emerging 3d metal catalysts. The future growth of this field will depend on industrial uptake, and thus we urge researchers to strive toward sustainable C-H activation.

Palladium-catalyzed functionalizations of acidic and non-acidic C(sp3)-H bonds - recent advances

A tremendous upsurge has been seen in the recent decade for the proximal and remote functionalization of activated and unactivated substrates via palladium redox pathways. This feature article discusses some of the recent reports on direct as well as indirect C(sp3)-H functionalization via cross-coupling reactions under palladium catalysis. Activated substrates (possessing acidic C(sp3)-H) including enones, ketones, aldehydes, silylenol ethers, esters, silyl ketene acetals, amides, cyano, α-amino esters, and O-carbamates, capable of undergoing cross-coupling reactions at the α-, β-, γ-, δ- and ε-positions, will be discussed. To overcome the challenging task of achieving regioselectivity, a variety of innovative modifications have been reported. The reports of C-H activations based on directing group, and as native functionality have been illustrated at the β-, γ- and δ-positions. Substrates such as α-amino esters, carbonyls, carboxylic acids and their derivatives, afford site-selective C(sp3)-H functionalization via varied-sized reactive metallacycles and are a unique class of substrates whose C(sp3)-H functionalizations were earlier considered as very difficult.

Palladium-Catalyzed Regioselective Arylation of Unprotected Allylamines

Palladium-catalyzed organometallic transformations of free amines are often unsuccessful due to side reactions, such as oxidation, that can occur. However, the ability to furnish the free amine products from these reactions is important for improving the utility and sustainability of these processes, especially for accessing their potential as medicinal and agrochemical agents. Notably, the 3,3-diarylallylamine motif is prevalent in a variety of biologically relevant structures, yet there are few catalytic approaches to their synthesis, and none involving the free amine. Herein, we describe a simple protocol for the arylation of cinnamylamines and the diarylation of terminal allylamines to generate a diverse group of 3,3-diarylallylamine products using a PdII precatalyst. Key features of the method are the ability to access relatively mild conditions that facilitate a broad substrate scope as well as direct diarylation of terminal allylamine substrates. In addition, several complex and therapeutically relevant molecules are included to demonstrate the utility of the transformation.

Carbon dioxide-promoted palladium-catalyzed dehydration of primary allylic alcohols: access to substituted 1,3-dienes

A carbon dioxide promoted dehydration reaction of primary allylic alcohols gives synthetically important substituted 1,3-dienes in good yields under milder conditions compared with the reaction using a heterogeneous catalyst or carbon monoxide.

Copper-catalyzed four-component reaction of alkenes, Togni's reagent, amines and CO2: stereoselective synthesis of (Z)-enol carbamates

A copper-catalyzed four-component reaction of alkenes, Togni's reagent, amines and CO₂ was disclosed, providing an efficient and straightforward access to a range of stereodefined (Z)-enol carbamates.

A CO2-Mediated Conjugate Cyanide Addition to Chalcones

Carbon dioxide is an intrinsically stable molecule; however, it can readily react with various nucleophilic reagents. In the presence of a cyanide source, CO2 was proven to be useful to promote addition reactions. Here we report the use of CO2 to facilitate 1,4-conjugate cyanide addition reaction to chalcones to generate organonitriles. Nitriles are key component in organic synthesis due to their utility in numerous functional group transformation, however, conjugation addition of cyanide has been a challenge in this substrate class due to side reactions. To mitigate this, we employed simple ammonium and metal cyanide sources as nucleophiles under carbon dioxide atmosphere where high selectivity toward the desired product was obtained. The presented reaction is not feasible under inert atmosphere, which highlights the important role of CO2, as a Lewis and Brøndsted acidic catalyst. Further derivatization of organonitriles compounds were performed to showcase the utility of the reaction, while an unprecedented dimerization reaction was identified and characterized, affording a cyclopentanone scaffold.

Mechanistic Insight into Palladium-Catalyzed γ-C(sp3)-H Arylation of Alkylamines with 2-Iodobenzoic Acid: Role of the o-Carboxylate Group

Density functional theory calculations were performed to understand the distinctly different reactivities of o-carboxylate-substituted aryl halides and pristine aryl halides toward the Pd^II-catalyzed γ-C(sp³)-H arylation of secondary alkylamines. It is found that, when 2-iodobenzoic acid (a representative of o-carboxylate-substituted aryl halides) is used as an aryl transfer agent, the arylation reaction is energetically favorable, while when the pristine aryl halide iodobenzene is used as the aryl transfer reagent, the reaction is kinetically difficult. Our calculations showed an operative Pd^II/Pd^IV/Pd^II redox cycle, which differs in the mechanistic details from the cycle proposed by the experimental authors. The improved mechanism emphasizes that (i) the intrinsic role of the o-carboxylate group is facilitating the C(sp³)-C(sp²) bond reductive elimination from Pd^IV rather than facilitating the oxidative addition of the aryl iodide on Pd^II, (ii) the decarboxylation occurs at the Pd^II species instead of the Pd^IV species, and (iii) the 1,2-arylpalladium migration proceeds via a stepwise mechanism where the reductive elimination occurs before decarboxylation, not via a concerted mechanism that merges the three processes decarboxylation, 1,2-arylpalladium migration, and C(sp³)-C(sp²) reductive elimination into one. The experimentally observed exclusive site selectivity of the reaction was also rationalized well.

Diverse strategies for transition metal catalyzed distal C(sp3)-H functionalizations

Transition metal catalyzed C(sp3)-H functionalization is a rapidly growing field. Despite severe challenges, distal C-H functionalizations of aliphatic molecules by overriding proximal positions have witnessed tremendous progress. While usage of stoichiometric directing groups played a crucial role, reactions with catalytic transient directing groups or methods without any directing groups are gaining more attention due to their practicality. Various innovative strategies, slowly but steadily, circumvented issues related to remote functionalizations of aliphatic molecules. A systematic compilation has been presented here to provide insights into the recent developments and future challenges in the field. The Present perspective is expected to open up a new dimension and provide an avenue for deep insights into the distal C(sp3)-H functionalizations that could be applied routinely in various pharmaceutical and agrochemical industries.

Pd-Catalyzed γ-C(sp3)-H Fluorination of Free Amines

The first example of free amine γ-C(sp³)-H fluorination is realized using 2-hydroxynicotinaldehyde as the transient directing group. A wide range of cyclohexyl and linear aliphatic amines could be fluorinated selectively at the γ-methyl and methylene positions. Electron withdrawing 3,5-disubstituted pyridone ligands were identified to facilitate this reaction. Computational studies suggest that the turnover determining step is likely the oxidative addition step for methylene fluorination, while it is likely the C-H activation step for methyl fluorination. The explicit participation of Ag results in a lower energetic span for methylene fluorination and a higher energetic span for methyl fluorination, which is consistent with the experimental observation that the addition of silver salt is desirable for methylene but not for methyl fluorination. Kinetic studies on methyl fluorination suggest that the substrate and PdL are involved in the rate-determining step, indicating that the C-H activation step may be partially rate-determining. Importantly, an energetically preferred pathway has identified an interesting pyridone-assisted bimetallic transition state for the oxidative addition step in methylene fluorination, thus uncovering a potential new role of the pyridone ligand.

Transient Directing Group Enabled Pd-catalyzed γ-C(sp3)-H Oxygenation of Alkyl Amines

We report a general protocol for γ-C(sp³)-H acyloxylation and alkoxylation of free amines using 2-hydroxynicotinaldehyde as the transient directing group. In the presence of an electrophilic fluorinating bystanding oxidant and acetic acid, a wide range of aliphatic amines could be oxygenated selectively at the γ-methyl positions. A vast variety of aryl, heteroaryl, and aliphatic acids could also be successfully coupled under this C-O bond formation reaction to afford amine containing esters. Switching the nucleophile from acids to alcohols enables alkoxylation of free amines. Importantly, natural products and drug molecules such as ibuprofen, isozepac, fenbufen, and lithocholic acid are all compatible coupling partners. Notably, synthesis of these mono-protected amino alcohols from free amino alcohols using conventional selective protection are not always feasible.

Palladium-Catalyzed Oxidation of β-C(sp3)-H Bonds of Primary Alkylamines through a Rare Four-Membered Palladacycle Intermediate

Site-selective functionalizations of C-H bonds are often achieved with a directing group that leads to five- or six-membered metallacyclic intermediates. Analogous reactions that occur through four-membered metallacycles are rare. We report a challenging palladium-catalyzed oxidation of primary C-H bonds β to nitrogen in an imine of an aliphatic amine, a process that occurs through a four-membered palladacyclc intermediate. The success of the reaction relies on the identification, by H/D exchange, of a simple directing group (salicylaldehyde) capable of inducing the formation of this small ring. To gain insight into the steps of the catalytic cycle of this unusual oxidation reaction, a series of mechanistic experiments and density functional theory (DFT) calculations were conducted. The experimental studies showed that cleavage of the C-H bond is rate-limiting and formation of the strained four-membered palladacycle is thermodynamically uphill. DFT calculations corroborated these conclusions and suggested that the presence of an intramolecular hydrogen bond between the oxygen of the directing group and hydroxyl group of the ligating acetic acid is crucial for stabilization of the palladacyclic intermediate.

Ligand-Controlled Direct γ-C-H Arylation of Aldehydes

The first example of Pd^II -catalyzed γ-C(sp³ )-H functionalization of aliphatic and benzoheteroaryl aldehydes has been developed using a transient ligand and an external ligand, concurrently. A wide array of γ-arylated aldehydes were readily accessed without preinstalling internal directing groups. The catalytic mechanism was studied by performing deuterium-labelling experiments, which indicated that the γ-C(sp³ )-H bond cleavage is the rate-limiting step during the reaction process. This reaction could be performed on a gram scale, and also demonstrated its potential application in the synthesis of new mechanofluorochromic materials with blue-shifted mechanochromic properties.

Transient imine directing groups for the C–H functionalisation of aldehydes, ketones and amines: an update 2018–2020

This review describes recent advances in C–H functionalisation using transient directing groups. Advances in directing group design, new bond forming methodologies, regio- and stereoselective processes, and new mechanistic insights are discussed.