Coordination Network That Reversibly Switches between Two Nonporous Polymorphs and a High Surface Area Porous Phase

Functional flexible adsorbents and their potential utility

Physisorbents are poised to address global challenges such as CO2 capture, mitigation of water scarcity and energy-efficient commodity gas storage and separation. Rigid physisorbents, i.e. those adsorbents that retain their structures upon gas or vapour exposure, are well studied in this context. Conversely, cooperatively flexible physisorbents undergo long-range structural transformations stimulated by guest exposure. Discovered serendipitously, flexible adsorbents have generally been regarded as scientific curiosities, which has contributed to misconceptions about their potential utility. Recently, increased scientific interest and insight into the properties of flexible adsorbents has afforded materials whose performance suggests that flexible adsorbents can compete with rigid adsorbents for both storage and separation applications. With respect to gas storage, adsorbents that undergo guest-induced phase transformations between low and high porosity phases in the right pressure range can offer improved working capacity and heat management, as exemplified by studies on adsorbed natural gas storage. For gas and vapour separations, the very nature of flexible adsorbents means that they can undergo induced fit mechanisms of guest binding, i.e. the adsorbent can adapt to a specific adsorbate. Such flexible adsorbents have set several new benchmarks for certain hydrocarbon separations in terms of selectivity and separation performance. This Feature Article reviews progress made by us and others towards the crystal engineering (design and control) of flexible adsorbents and addresses several of the myths that have emerged since their initial discovery, particularly with respect to those performance parameters of relevance to natural gas storage, water harvesting and hydrocarbon gas/vapour separation.

Two Thiophene-Functionalized Co-MOFs as Green Heterogeneous Catalysts for the Biginelli Reaction

Two Co(II) metal-organic frameworks (Co-MOFs), namely, [Co(DMTDC)(bimb)]n (Co-MOF-1) and {[Co(DPTDC)(bimb)(H2O)]·2DMF}n (Co-MOF-2) (H2DMTDC = 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylic acid, H2DPTDC = 3,4-diphenylthieno[2,3-b]thiophene-2,5-dicarboxylic acid, bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene), were obtained by the reaction of flexible N-containing ligand bimb and two structurally related thiophene-containing ligands H2DMTDC and H2DPTDC, respectively. These Co-MOFs displayed a 3D framework and porous structure, respectively. Co-MOF-1 and the activated sample Co-MOF-2' could act as green heterogeneous catalysts for the one-pot multicomponent Biginelli reaction, specifically the dehydration condensation process involving aldehydes, acetoacetates, and urea to yield dihydropyrimidin-2(1H)-ones. The reaction has advantages such as solvent-free conditions, water as only byproduct, readily accessible starting materials, excellent functional group compatibility, and simple operation. Both catalysts exhibited a wide substrate scope and maintained significant catalytic activity over five cycles. The special catalytic performance may be ascribed to functional groups within the ligand.

Insight into the Gas-Induced Phase Transformations in a 2D Switching Coordination Network via Coincident Gas Sorption and In Situ PXRD

Switching coordination networks (CNs) that reversibly transform between narrow or closed pore (cp) and large pore (lp) phases, though fewer than their rigid counterparts, offer opportunities for sorption-related applications. However, their structural transformations and switching mechanisms remain underexplored at the molecular level. In this study, we conducted a systematic investigation into a 2D switching CN, [Ni(bpy)2(NCS)2]n, sql-1-Ni-NCS (1 = bpy = 4,4'-bipyridine), using coincident gas sorption and in situ powder X-ray diffraction (PXRD) under low-temperature conditions. Gas adsorption measurements revealed that C2H4 (169 K) and C2H6 (185 K) exhibited single-step type F-IVs sorption isotherms with sorption uptakes of around 180-185 cm3 g-1, equivalent to four sorbate molecules per formula unit. Furthermore, parallel in situ PXRD experiments provided insight into sorbate-dependent phase switching during the sorption process. Specifically, CO2 sorption induced single-step phase switching (path I) solely between cp and lp phases consistent with the observed single-step type F-IVs sorption isotherm. By contrast, intermediate pore (ip) phases emerged during C2H4 and C2H6 desorption as well as C3H6 adsorption, although they remained undetectable in the sorption isotherms. To our knowledge, such a cp-lp-ip-cp transformation (path II) induced by C2H4/6 and accompanied by single-step type F-IVs sorption isotherms represents a novel type of phase transition mechanism in switching CNs. By virtue of Rietveld refinements and molecular simulations, we elucidated that the phase transformations are governed by cooperative local and global structural changes involving NCS- ligand reorientation, bpy ligand twist and rotation, cavity edge (Ni-bpy-Ni) deformation, and interlayer expansion and sliding.

The Effect of Pendent Groups upon Flexibility in Coordination Networks with Square Lattice Topology

Gas or vapor-induced phase transformations in flexible coordination networks (CNs) offer the potential to exceed the performance of their rigid counterparts for separation and storage applications. However, whereas ligand modification has been used to alter the properties of such stimulus-responsive materials, they remain understudied compared with their rigid counterparts. Here, we report that a family of Zn2+ CNs with square lattice (sql) topology, differing only through the substituents attached to a linker, exhibit variable flexibility. Structural and CO2 sorption studies on the sql networks, [Zn(5-Ria)(bphy)]n, ia = isophthalic acid, bphy = 1,2-bis(pyridin-4-yl)hydrazine, R = -CH3, -OCH3, -C(CH3)3, -N=N-Ph, and -N=N-Ph(CH3)2, 2-6, respectively, revealed that the substituent moieties influenced both structural and gas sorption properties. Whereas 2-3 exhibited rigidity, 4, 5, and 6 exhibited reversible transformation from small pore to large pore phases. Overall, the insight into the profound effect of pendent moieties of linkers upon phase transformations in this family of layered CNs should be transferable to other CN classes.

Metal cation substitution can tune CO2, H2O and CH4 switching pressure in transiently porous coordination networks

Compared to rigid physisorbents, switching coordination networks that reversibly transform between closed (non-porous) and open (porous) phases offer promise for gas/vapour storage and separation owing to their improved working capacity and desirable thermal management properties. We recently introduced a coordination network, X-dmp-1-Co, which exhibits switching enabled by transient porosity. The resulting "open" phases are generated at threshold pressures even though they are conventionally non-porous. Herein, we report that X-dmp-1-Co is the parent member of a family of transiently porous coordination networks [X-dmp-1-M] (M = Co, Zn and Cd) and that each exhibits transient porosity but switching events occur at different threshold pressures for CO2 (0.8, 2.1 and 15 mbar, for Co, Zn and Cd, respectively, at 195 K), H2O (10, 70 and 75% RH, for Co, Zn and Cd, respectively, at 300 K) and CH4 (<2, 10 and 25 bar, for Co, Zn and Cd, respectively, at 298 K). Insight into the phase changes is provided through in situ SCXRD and in situ PXRD. We attribute the tuning of gate-opening pressure to differences and changes in the metal coordination spheres and how they impact dpt ligand rotation. X-dmp-1-Zn and X-dmp-1-Cd join a small number of coordination networks (<10) that exhibit reversible switching for CH4 between 5 and 35 bar, a key requirement for adsorbed natural gas storage.

Supramolecular isomerism and structural flexibility in coordination networks sustained by cadmium rod building blocks

Bifunctional N-donor carboxylate linkers generally afford dia and sql topology coordination networks of general formula ML₂ that are based upon the MN₂(CO₂)₂ molecular building block (MBB). Herein, we report on a new N-donor carboxylate linker, β-(3,4-pyridinedicarboximido)propionate (PyImPr), which afforded Cd(PyImPr)₂via reaction of PyImPrH with Cd(acetate)₂·2H₂O. We observed that, depending upon whether Cd(PyImPr)₂ was prepared by layering or solvothermal methods, 2D or 3D supramolecular isomers, respectively, of Cd(PyImPr)₂ were isolated. Single crystal X-ray diffraction studies revealed that both supramolecular isomers are comprised of the same carboxylate bridged rod building block, RBB. We were interested to determine if the ethylene moiety of PyImPr could enable structural flexibility. Indeed, open-to-closed structural transformations occurred upon solvent removal for both phases, but they were found to be irreversible. A survey of the Cambridge Structural Database (CSD) was conducted to analyse the relative frequency of RBB topologies in related ML₂ coordination networks in order to provide insight from a crystal engineering perspective.

Control over Phase Transformations in a Family of Flexible Double Diamondoid Coordination Networks through Linker Ligand Substitution

In this work, we present the first metal-organic framework (MOF) platform with a self-penetrated double diamondoid (ddi) topology that exhibits switching between closed (nonporous) and open (porous) phases induced by exposure to gases. A crystal engineering strategy, linker ligand substitution, was used to control gas sorption properties for CO₂ and C3 gases. Specifically, bimbz (1,4-bis(imidazol-1-yl)benzene) in the coordination network X-ddi-1-Ni ([Ni₂(bimbz)₂(bdc)₂(H₂O)]_n, H₂bdc = 1,4-benzenedicarboxylic acid) was replaced by bimpz (3,6-bis(imidazol-1-yl)pyridazine) in X-ddi-2-Ni ([Ni₂(bimpz)₂(bdc)₂(H₂O)]_n). In addition, the 1:1 mixed crystal X-ddi-1,2-Ni ([Ni₂(bimbz)(bimpz)(bdc)₂(H₂O)]_n) was prepared and studied. All three variants form isostructural closed (β) phases upon activation which each exhibited different reversible properties upon exposure to CO₂ at 195 K and C3 gases at 273 K. For CO₂, X-ddi-1-Ni revealed incomplete gate-opening, X-ddi-2-Ni exhibited a stepped isotherm with saturation uptake of 3.92 mol·mol^-1, and X-ddi-1,2-Ni achieved up to 62% more gas uptake and a distinct isotherm shape vs the parent materials. Single-crystal X-ray diffraction (SCXRD) and in situ powder X-ray diffraction (PXRD) experiments provided insight into the mechanisms of phase transformation and revealed that the β phases are nonporous with unit cell volumes 39.9, 40.8, and 41.0% lower than the corresponding as-synthesized α phases, X-ddi-1-Ni-α, X-ddi-2-Ni-α, and X-ddi-1,2-Ni-α, respectively. The results presented herein represent the first report of reversible switching between closed and open phases in ddi topology coordination networks and further highlight how ligand substitution can profoundly impact the gas sorption properties of switching sorbents.

Shape-Memory Effect Triggered by π-π Interactions in a Flexible Terpyridine Metal-Organic Framework

Shape-memory polymers and alloys are adaptable materials capable of reversing from a deformed, metastable phase to an energetically favored original phase in response to external stimuli. In the context of metal-organic frameworks, the term shape-memory is defined as the property of a switchable framework to stabilize the reopened pore phase after the first switching transition. Herein we describe a novel flexible terpyridine MOF which, upon desolvation, transforms into a nonporous structure that reopens into a shape-memory phase when exposed to CO₂ at 195 K. Based on comprehensive in situ experimental studies (SC-XRD and PXRD) and DFT energetic considerations combined with literature reports, we recommend dividing shape-memory MOFs into two categories, viz responsive and nonresponsive, depending on the transformability of the gas-free reopened pore phase into the collapsed phase. Furthermore, considering the methodological gap in discovering and understanding shape-memory porous materials, we emphasize the importance of multicycle physisorption experiments for dynamic open framework materials, including metal-organic and covalent organic frameworks.

A Robust Molecular Porous Material for C2 H2 /CO2 Separation

A molecular porous material, MPM-2, comprised of cationic [Ni₂ (AlF₆ )(pzH)₈ (H₂ O)₂ ] and anionic [Ni₂ Al₂ F₁₁ (pzH)₈ (H₂ O)₂ ] complexes that generate a charge-assisted hydrogen-bonded network with pcu topology is reported. The packing in MPM-2 is sustained by multiple interionic hydrogen bonding interactions that afford ultramicroporous channels between dense layers of anionic units. MPM-2 is found to exhibit excellent stability in water (>1 year). Unlike most hydrogen-bonded organic frameworks which typically show poor stability in organic solvents, MPM-2 exhibited excellent stability with respect to various organic solvents for at least two days. MPM-2 is found to be permanently porous with gas sorption isotherms at 298 K revealing a strong affinity for C₂ H₂ over CO₂ thanks to a high (ΔQ_st )_AC [Q_st (C₂ H₂ ) - Q_st (CO₂ )] of 13.7 kJ mol^-1 at low coverage. Dynamic column breakthrough experiments on MPM-2 demonstrated the separation of C₂ H₂ from a 1:1 C₂ H₂ /CO₂ mixture at 298 K with effluent CO₂ purity of 99.995% and C₂ H₂ purity of >95% after temperature-programmed desorption. C-H···F interactions between C₂ H₂ molecules and F atoms of AlF₆ ^3- are found to enable high selectivity toward C₂ H₂ , as determined by density functional theory simulations.

Adsorbate-dependent phase switching in the square lattice topology coordination network [Ni(4,4'-bipyridine)2(NCS)2]n

Switching coordination networks (CNs) featuring stepped sorption isotherms that are accompanied by phase changes offer promise for gas storage and separation applications. However, their responsiveness to different adsorbates remains largely understudied. Herein, we report the variable switching behaviour of a previously known square lattice (sql) topology CN, [Ni(4,4'-bipyridine)₂(NCS)₂] (sql-1-Ni-NCS), with respect to nine gaseous adsorbates.

Solid-state NMR studies of metal ion and solvent influences upon the flexible metal-organic framework DUT-8

Within the present contribution, we describe solid-state NMR spectroscopic studies of the paddle wheel unit in the prototypic flexible MOF compound DUT-8(M) (M = Ni, Co, Zn). The ¹³C NMR chemical shift of these carboxylates shows a remarkable behavior. The pure 2,6-H₂ndc linker carboxylates as well as DUT-8(Zn) exhibit a¹³C chemical shift of only about 170 ppm. In contrast, much higher values are observed for DUT-8(Ni) and especially DUT-8(Co). In the open pore state, the shift strongly depends on the solvent polarity in these two latter cases. The present contribution elucidates the reason for this solvent influence. It is concluded that the solvent mainly modifies the isotropic Fermi contact coupling constant for the excited high-spin states in DUT-8(Ni) and DUT-8(Co).

Multi-step Phase Transformation from Metal-Organic Frameworks to Inorganic Compounds for High-Purity Th(IV) Generation

The generation of high-purity thorium is the precondition for next-generation nuclear energy; however, this remains a challenging task. To this end, we present herein an ultrasimple technique with the combination of crystallization plus phase transformation. Crystallization into ECUT-68 is found to show almost 100% selective uptake of Th(IV) over rare earth and UO₂²⁺ ions, while multistep phase transformation from metal-organic frameworks (MOFs) to inorganic compounds is found to directly generate inorganic Th(IV) compound and then Th(IV) solution, suggesting its superior application in the generation of high-purity thorium.

Topological transformations in metal–organic frameworks: a prospective design route?

We apply a topological approach based on the underlying net and transformation pattern concepts as well as on the ‘supernet–subnet’ formalism to uncover mechanisms of solid-state transformations in coordination polymers and metal–organic frameworks.

Spiers Memorial Lecture: Coordination networks that switch between nonporous and porous structures: an emerging class of soft porous crystals

Coordination networks (CNs) are a class of (usually) crystalline solids typically comprised of metal ions or cluster nodes linked into 2 or 3 dimensions by organic and/or inorganic linker ligands. Whereas CNs tend to exhibit rigid structures and permanent porosity as exemplified by most metal-organic frameworks, MOFs, there exists a small but growing class of CNs that can undergo extreme, reversible structural transformation(s) when exposed to gases, vapours or liquids. These "soft" or "stimuli-responsive" CNs were introduced two decades ago and are attracting increasing attention thanks to two features: the amenability of CNs to design from first principles, thereby enabling crystal engineering of families of related CNs; and the potential utility of soft CNs for adsorptive storage and separation. A small but growing subset of soft CNs exhibit reversible phase transformations between nonporous (closed) and porous (open) structures. These "switching CNs" are distinguished by stepped sorption isotherms coincident with phase transformation and, perhaps counterintuitively, they can exhibit benchmark properties with respect to working capacity (storage) and selectivity (separation). This review addresses fundamental and applied aspects of switching CNs through surveying their sorption properties, analysing the structural transformations that enable switching, discussing structure-function relationships and presenting design principles for crystal engineering of the next generation of switching CNs.

Benchmark Acetylene Binding Affinity and Separation through Induced Fit in a Flexible Hybrid Ultramicroporous Material

Structural changes at the active site of an enzyme induced by binding to a substrate molecule can result in enhanced activity in biological systems. Herein, we report that the new hybrid ultramicroporous material sql-SIFSIX-bpe-Zn exhibits an induced fit binding mechanism when exposed to acetylene, C2 H2 . The resulting phase change affords exceptionally strong C2 H2 binding that in turn enables highly selective C2 H2 /C2 H4 and C2 H2 /CO2 separation demonstrated by dynamic breakthrough experiments. sql-SIFSIX-bpe-Zn was observed to exhibit at least four phases: as-synthesised (α); activated (β); and C2 H2 induced phases (β' and γ). sql-SIFSIX-bpe-Zn-β exhibited strong affinity for C2 H2 at ambient conditions as demonstrated by benchmark isosteric heat of adsorption (Qst ) of 67.5 kJ mol-1 validated through in situ pressure gradient differential scanning calorimetry (PG-DSC). Further, in situ characterisation and DFT calculations provide insight into the mechanism of the C2 H2 induced fit transformation, binding positions and the nature of host-guest and guest-guest interactions.

Tunable Metal-Organic Frameworks Based on 8-Connected Metal Trimers for High Ethane Uptake

Metal trimers [M₃ (O/OH)](OOCR)₆ are among the most important structural building blocks. From these trimers, a great success has been achieved in the design of 6- or 9-connected framework materials with various topological features and outstanding gas-sorption properties. In comparison, 8-connected trimer-based metal-organic frameworks (MOFs) are rare. Given multiple competitive pathways for the formation of 6- or 9-connected frameworks, it remains challenging to identify synthetic or structural parameters that can be used to direct the self-assembly process toward trimer-based 8-connected materials. Here, a viable strategy called angle bending modulation is revealed for creating a prototypical MOF type based on 8-connected M₃ (OH)(OOCR)₅ (Py-R)₃ trimers (M = Zn, Co, Fe). As a proof of concept, six members in this family are synthesized using three types of ligands (CPM-80, -81, and -82). These materials do not possess open-metal sites and show excellent uptake capacity for various hydrocarbon gas molecules and inverse C₂ H₆ /C₂ H₄ selectivity. CPM-81-Co, made from 2,5-furandicarboxylate and isonicotinate, features selectivity of 1.80 with high uptake capacity for ethane (123 cm³ g^-1 ) and ethylene (113 cm³ g^-1 ) at 298 K and 1 bar.

Sequential Solid-State Transformations Involving Consecutive Rearrangements of Secondary Building Units in a Metal–Organic Framework (MOF)

Solid-state transformations in metal-organic frameworks (MOFs) are important and have led to the creation of new MOF structures. Solid-state transformations from interpenetrated to non-interpenetrated networks involving rearrangement of secondary building units (SBUs) in a single-crystal-to-single-crystal (SCSC) fashion have not been explored to date. Herein, we report the sequential, thermally stimulated solid-state transformations in a barium-organic framework (UPC-600). The two-fold interpenetrated framework of UPC-600 is converted at 373 K into UPC-601, a non-interpenetrated framework. This proceeds in a SCSC fashion and involves the rearrangement of two proximate rod-shaped SBUs in different nets to generate a new rod-shaped SBU. At 473 K, a continuous solid-state transformation involving a second rearrangement occurred, UPC-601 converted into UPC-602 by the rearrangement of the 1D rod-shaped SBU to a 2D layer SBU. This is the first example of such a thermally driven stepwise transformation involving simultaneous cleavage and regeneration of multiple bonds.

An Expandable Hydrogen-Bonded Organic Framework Characterized by Three-Dimensional Electron Diffraction

A molecular crystal of a 2-D hydrogen-bonded organic framework (HOF) undergoes an unusual structural transformation after solvent removal from the crystal pores during activation. The conformationally flexible host molecule, ABTPA, adapts its molecular conformation during activation to initiate a framework expansion. The microcrystalline activated phase was characterized by three-dimensional electron diffraction (3D ED), which revealed that ABTPA uses out-of-plane anthracene units as adaptive structural anchors. These units change orientation to generate an expanded, lower density framework material in the activated structure. The porous HOF, ABTPA-2, has robust dynamic porosity (SA_BET = 1183 m² g^-1) and exhibits negative area thermal expansion. We use crystal structure prediction (CSP) to understand the underlying energetics behind the structural transformation and discuss the challenges facing CSP for such flexible molecules.

The charge-assisted hydrogen-bonded organic framework (CAHOF) self-assembled from the conjugated acid of tetrakis(4-aminophenyl)methane and 2,6-naphthalenedisulfonate as a new class of recyclable Brønsted acid catalysts

The acid-base neutralization reaction of commercially available disodium 2,6-naphthalenedisulfonate (NDS, 2 equivalents) and the tetrahydrochloride salt of tetrakis(4-aminophenyl)methane (TAPM, 1 equivalent) in water gave a novel three-dimensional charge-assisted hydrogen-bonded framework (CAHOF, F-1). The framework F-1 was characterized by X-ray diffraction, TGA, elemental analysis, and ¹H NMR spectroscopy. The framework was supported by hydrogen bonds between the sulfonate anions and the ammonium cations of NDS and protonated TAPM moieties, respectively. The CAHOF material functioned as a new type of catalytically active Brønsted acid in a series of reactions, including the ring opening of epoxides by water and alcohols. A Diels-Alder reaction between cyclopentadiene and methyl vinyl ketone was also catalyzed by F-1 in heptane. Depending on the polarity of the solvent mixture, the CAHOF F-1 could function as a purely heterogeneous catalyst or partly dissociate, providing some dissolved F-1 as the real catalyst. In all cases, the catalyst could easily be recovered and recycled.

Reversible Switching between Nonporous and Porous Phases of a New SIFSIX Coordination Network Induced by a Flexible Linker Ligand

Closed-to-open structural transformations in flexible coordination networks are of potential utility in gas storage and separation. Herein, we report the first example of a flexible SiF₆^2--pillared square grid material, [Cu(SiF₆)(L)₂]_n (L = 1,4-bis(1-imidazolyl)benzene), SIFSIX-23-Cu. SIFSIX-23-Cu exhibits reversible switching between nonporous (β1) and several porous (α, γ1, γ2, and γ3) phases triggered by exposure to N₂, CO₂, or H₂O. In addition, heating β1 to 433 K resulted in irreversible transformation to a closed polymorph, β2. Single-crystal X-ray diffraction studies revealed that the phase transformations are enabled by rotation and geometrical contortion of L. Density functional theory calculations indicated that L exhibits a low barrier to rotation (as low as 8 kJmol^-1) and a rather flat energy surface. In situ neutron powder diffraction studies provided further insight into these sorbate-induced phase changes. SIFSIX-23-Cu combines stability in water for over a year, high CO₂ uptake (ca. 216 cm³/g at 195 K), and good thermal stability.

Twist and sliding dynamics between interpenetrated frames in Ti-MOF revealing high proton conductivity

We report the design and synthesis of a titanium catecholate framework, MOF-217, comprised of 2,4,6-tri(3,4-dihydroxyphenyl)-1,3,5-triazine (TDHT) and isolated TiO6 clusters, with 2-fold interpenetrated srs topology. The dynamics of the organic linker, breaking the C 3h symmetry, allowed for reversible twist and sliding between interpenetrated frames upon temperature change and the inclusion of small molecules. Introduction of 28 wt% imidazole into the pores of MOF-217, 28% Im-in-MOF-217, resulted in four orders of magnitude increase in proton conductivity, due to the appropriate accommodation of imidazole molecules and their proton transfer facilitated by the H-bond to the MOF structure across the pores. This MOF-based proton conductor can be operated at 100 °C with a proton conductivity of 1.1 × 10-3 S cm-1, standing among the best performing anhydrous MOF proton conductors at elevated temperature. The interframe dynamics represents a unique feature of MOFs that can be accessed in the future design of proton conductors.

Reversible Solid-State Phase Transitions between Au-P Complexes Accompanied by Switchable Fluorescence

Six complexes {(3-bdppmapy)(AuCl)₂}_n (1-6; 3-bdppmapy = N,N'-bis(diphenylphosphanylmethyl)-3-aminopyridine and tht = tetrahydrothiophene) were simultaneously formed by the reaction of Au(tht)Cl and 3-bdppmapy in CH₂Cl₂ followed by infusion with hexane. Complexes 4-6 could be produced independently by volatilizing solvent in air, solid-state heating, or solvothermal reaction. The PPh₂-Au-Cl moieties extended in different directions, forming Au-Au and Au-Au-Au interactions. Complex 4 could be converted to 5 by heating to 130 °C, with the cleavage of one Au-Au bond, while 5 reverted back to 4 upon exposure to CH₂Cl₂ vapor over 11 h. This solid-state phase transition could be recycled and was accompanied by a change in solid-state fluorescence, without obvious intensity decay over five cycles. The reason for both the phase transition and difference in photoluminescence is related to the different numbers and strengths of aurophilic interactions in each complex that could be modeled by density functional theory calculations.

Novel alkaline earth metal–organic frameworks with thiophene groups for selective detection of Fe3+

This work demonstrates that the alkaline earth ion radii play an important role in coordination numbers and topologies for constructing MOFs, and these MOFs can be used as fast-response fluorescence sensors for the detection of Fe³⁺.

Perovskite-related ReO3-type structures

Materials with the perovskite ABX3 structure play a major role across materials chemistry and physics as a consequence of their ubiquity and wide range of useful properties. ReO3-type structures can be described as ABX3 perovskites in which the A-cation site is unoccupied, giving rise to the general composition BX3, where B is typically a cation and X is a bridging anion. The chemical diversity of such structures is extensive, ranging from simple oxides and fluorides, such as WO3 and AlF3, to complex structures in which the bridging anion is polyatomic, such as in the Prussian blue-related cyanides Fe(CN)3 and CoPt(CN)6. The same ReO3-type structure is found in metal-organic frameworks, for example, ln (im)3(im = imidazolate) and the well-known MOF-5 structure, where the B-site cation is polyatomic. The extended 3D connectivity and openness of this structure type leads to compounds with interesting and often unusual properties. Notable among these properties are negative thermal expansion (for example, ScF3), photocatalysis (for example, CoSn(OH)6), thermoelectricity (for example, CoAs3) and superconductivity in a phase that is controversially described as SH3 with a doubly interpenetrating ReO3 structure. We present an account of this exciting family of materials and discuss future opportunities in the area.

Metal/N-donor-induced versatile structures and properties of seven 0D → 3D complexes based on dpq/dppz and O-bridged tricarboxylate: fluorescence and electrochemical behaviors

Seven 0D → 3D coordination polymers based on dpq/dppz and O-bridged tricarboxylates have been hydrothermally synthesized and structurally directed by metal ions, which show different electrochemical and fluorescence behaviors.

CO2-induced single-crystal to single-crystal transformations of an interpenetrated flexible MOF explained by in situ crystallographic analysis and molecular modeling

A molecular-level investigation is reported on breathing behaviour of a metal-organic framework (1) in response to CO2 gas pressure. High-pressure gas adsorption shows a pronounced step corresponding to a gate-opening phase transformation from a closed (1cp ) to a large-pore (1lp ) form. A plateau is observed upon desorption corresponding to narrow-pore intermediate form 1np which does not occur during adsorption. These events are corroborated by pressure-gradient differential scanning calorimetry and in situ single-crystal X-ray diffraction analysis under controlled CO2 gas pressure. Complete crystallographic characterisation facilitated a rationalisation of each phase transformation in the series 1cp → 1lp → 1np → 1cp during adsorption and subsequent desorption. Metropolis grand-canonical Monte Carlo simulations and DFT-PBE-D3 interaction energy calculations strongly underpin this first detailed structural investigation of an intermediate phase encountered upon desorption.

Tuning the Gate-Opening Pressure in a Switching pcu Coordination Network, X-pcu-5-Zn, by Pillar-Ligand Substitution

Coordination networks that reversibly switch between closed and open phases are of topical interest since their stepped isotherms can offer higher working capacities for gas-storage applications than the related rigid porous coordination networks. To be of practical utility, the pressures at which switching occurs, the gate-opening and gate-closing pressures, must lie between the storage and delivery pressures. Here we study the effect of linker substitution to fine-tune gate-opening and gate-closing pressure. Specifically, three variants of a previously reported pcu-topology MOF, X-pcu-5-Zn, have been prepared: X-pcu-6-Zn, 6=1,2-bis(4-pyridyl)ethane (bpe), X-pcu-7-Zn, 7=1,2-bis(4-pyridyl)acetylene (bpa), and X-pcu-8-Zn, 8=4,4'-azopyridine (apy). Each exhibited switching isotherms but at different gate-opening pressures. The N₂ , CO₂ , C₂ H₂ , and C₂ H₄ adsorption isotherms consistently indicated that the most flexible dipyridyl organic linker, 6, afforded lower gate-opening and gate-closing pressures. This simple design principle enables a rational control of the switching behavior in adsorbent materials.

Reversible Multiphase Transition in a BioMOF and Its Distinctive Luminescence Turn-On in Alcohol Vapor

Solvothermal reaction of zinc meso-tetra(4-carboxyphenyl)porphyrin and 2,6-diaminopurine with zinc salt in DMF affords a three-dimensional bioMOF (1-α). Its infinite rod-shaped building block features an alternation of octahedral Zn₄O and paddle-wheel Zn₂ clusters bridged by 2,6-diaminopurines. The paddle-wheel Zn₂ cluster undergoes reversible transformation with half into quasi-paddle-wheel Zn₂ cluster and the other half into two tetrahedral mononuclear clusters upon release/uptake of guest molecules, resulting in a new phase 1-β. This single-crystal to single-crystal transformation is accompanied by luminescence on/off switching, possibly associated with the structural conversion between the porphyrin-ligand-based photoactive 1-α and the porphyrin-stacking-caused non-photoactive 1-β. Interestingly, 1-β exhibits quick luminescence turn-on in alcohol vapor instead of other volatile organic solvents by transforming into an intermediate phase 1-γ, which shows a partial luminescence enhancing likely due to the intermittent porphyrin π-π stacking. In view of experimental results and theoretical calculations, this distinctive alcohol-vapor-induced luminescence turn-on is attributed to the coordination ability to porphyrin-bound zinc ion, molecular size, and vapor pressure, in which methanol and ethanol are particularly favored.

Enhanced Gas Uptake in a Microporous Metal-Organic Framework via a Sorbate Induced-Fit Mechanism

Physical adsorption of gas molecules in microporous materials is an exothermic process, with desorption entropy driving a decrease in uptake with temperature. Enhanced gas sorption with increasing temperature is rare in porous materials and is indicative of sorbate initiated structural change. Here, sorption of C₂H₆, C₃H₆, and C₃H₈ in a flexible microporous metal-organic framework (MOF) {Cu(FPBDC)]·DMF}_n (NKU-FlexMOF-1) (H₂FPBDC = 5-(5-fluoropyridin-3-yl)-1,3-benzenedicarboxylic acid) that increases with rising temperature over a practically useful temperature and pressure range is reported along with other small molecule and hydrocarbon sorption isotherms. Single X-ray diffraction studies, temperature-dependent gas sorption isotherms, in situ and variable temperature powder X-ray diffraction experiments, and electronic structure calculations were performed to characterize the conformation-dependent sorption behavior in NKU-FlexMOF-1. In total, the data supports that the atypical sorption behavior is a result of loading-dependent structural changes in the flexible framework of NKU-FlexMOF-1 induced by sorbate-specific guest-framework interactions. The sorbates cause subtle adaptations of the framework distinct to each sorbate providing an induced-fit separation mechanism to resolve chemically similar hydrocarbons through highly specific sorbate-sorbent interactions. The relevant intermolecular contacts are shown to be predominantly repulsion and dispersion interactions. NKU-FlexMOF-1 is also found to be stable in aqueous solutions including toleration of pH changes. These experiments demonstrate the potential of this flexible microporous MOF for cost and energy efficient industrial hydrocarbon separation and purification processes. The efficacy for the separation of C₃H₆/C₃H₈ mixtures is explicitly demonstrated using NKU-FlexMOF-1a (i.e., activated NKU-FlexMOF-1) for a particular useful temperature range.

Flexibility of Metal-Organic Framework Tunable by Crystal Size at the Micrometer to Submillimeter Scale for Efficient Xylene Isomer Separation

Understanding, controlling, and utilizing the flexibility of adsorbents are of great importance and difficulty. Analogous with conventional solid materials, downsizing to the nanoscale is emerging as a possible strategy for controlling the flexibility of porous coordination polymers (or metal-organic frameworks). We report a unique flexibility controllable by crystal size at the micrometer to submillimeter scale. Template removal transforms [Cu₂(pypz)₂]·0.5p-xylene (MAF-36, Hpypz = 4-(1H-pyrazol-4-yl)pyridine) with one-dimensional channels to α-[Cu₂(pypz)₂] with discrete small cavities, and further heating gives a nonporous isomer β-[Cu₂(pypz)₂]. Both isomers can adsorb p-xylene to give [Cu₂(pypz)₂]·0.5p-xylene, meaning the coexistence of guest-driven flexibility and shape-memory behavior. The phase transition temperature from α-[Cu₂(pypz)₂] to β-[Cu₂(pypz)₂] decreased from ~270°C to ~150°C by increasing the crystal size from the micrometer to the submillimeter scale, ca. 2-3 orders larger than those of other size-dependent behaviors. Single-crystal X-ray diffraction showed coordination bond reconstitution and chirality inversion mechanisms for the phase transition, which provides a sufficiently high energy barrier to stabilize the metastable phase without the need of downsizing to the nanoscale. By virtue of the crystalline molecular imprinting and gate-opening effects, α-[Cu₂(pypz)₂] and β-[Cu₂(pypz)₂] show unprecedentedly high p-xylene selectivities of 16 and 51, respectively, as well as ultrafast adsorption kinetics (<2 minutes), for xylene isomers.

Dysprosium Chlorocyanoanilate-Based 2D-Layered Coordination Polymers

A series of two-dimensional (2D)-layered coordination polymers (CPs) based on the heterosubstituted anilate ligand ClCNAn^2- derived from 3-chloro-6-cyano-2,5-dihydroxybenzoquinone and Dy^III are reported. By changes in the synthetic methods (layering technique, solvothermal or conventional one-pot reactions) and conditions (solvent, concentration, etc.), different types of 2D extended networks could be prepared and structurally characterized. Compounds 1 and 1', two polymorphs with the formula [Dy₂(ClCNAn)₃(DMSO)₆]_n·(H₂O)_x [x = 7 (1), 0 (1')], were prepared by a conventional one-pot reaction and recrystallized at different concentrations. Compound 2, formulated as [Dy₂(ClCNAn)₃(DMF)₆]_n, was prepared by a layering technique, while compound 3, formulated as {(Me₂NH₂)₂[Dy₂(ClCNAn)₄(H₂O)₂]·(DMF)₂·(H₂O)₅}_n, was obtained by a solvothermal method. Compounds 1 and 2 are neutral 2D CPs of the ClCNAn^2- ligand and Dy^III ions, while 3 presents 2D anionic layers of [Dy₂(ClCNAn)₄(H₂O)₂]^2- alternating with cationic layers of Me₂NH₂⁺ ions. These compounds show very diverse networks, with compound 1 forming 2D (8,3) and (4,3) topology with eight- and four-membered rings with square cavities, 1' and 2, respectively, a 2D (6,3) topology with six-membered rings (a rectangular cavity for 1' and a regular hexagonal cavity for 2), and 3 a 2D (4,4) topology with distorted square cavities. In this respect, 1 and 1' represent the first examples of polymorphism in the family of anilate-based CPs. Thermal analysis measurements (differential scanning calorimetry and thermogravimetry) show an exothermic polymorphic transformation from the kinetically stable 1' phase to the thermodynamically stable phase 1. The magnetic behavior of 1-3 very likely indicates depopulation of the m_J levels, while the presence of weak antiferromagnetic coupling between the Dy^III centers mediated by the anilate bridge cannot be excluded.

Soft Porous Crystal Based upon Organic Cages That Exhibit Guest-Induced Breathing and Selective Gas Separation

Soft porous crystals (SPCs) that exhibit stimuli-responsive dynamic sorption behavior are attracting interest for gas storage/separation applications. However, the design and synthesis of SPCs is challenging. Herein, we report a new type of SPC based on a [2 + 3] imide-based organic cage (NKPOC-1) and find that it exhibits guest-induced breathing behavior. Various gases were found to induce activated NKPOC-1 crystals to reversibly switch from a "closed" nonporous phase (α) to two porous "open" phases (β and γ). The net effect is gate-opening behavior induced by CO₂ and C3 hydrocarbons. Interestingly, NKPOC-1-α selectively adsorbs propyne over propylene and propane under ambient conditions. Thus, NKPOC-1-α has the potential to separate binary and ternary C3 hydrocarbon mixtures, and the performance was subsequently verified by fixed bed column breakthrough experiments. In addition, molecular dynamics calculations and in situ X-ray diffraction experiments indicate that the gate-opening effect is accompanied by reversible structural transformations. The adsorption energies from molecular dynamics simulations aid are consistent with the experimentally observed selective adsorption phenomena. The understanding gained from this study of NKPOC-1 supports the further development of SPCs for applications in gas separation/storage because SPCs do not inherently suffer from the recyclability problems often encountered with rigid materials.

rtl-M-MOFs (M = Cu, Zn) with a T-shaped bifunctional pyrazole-isophthalate ligand showing flexibility and S-shaped Type F-IV sorption isotherms with high saturation uptakes for M = Cu

The flexible, activated MOF rtl-[Cu(HIsa-az-dmpz)] undergoes a reversible phase change into a closed form with gate opening at cryogenic temperatures for N₂ and CO₂.

Tuning of the flexibility in metal–organic frameworks based on pendant arm macrocycles

An isostructural series of flexible MOFs based on pendant arm macrocycles was developed to tune flexibility depending on functional groups.