Photon Upconversion in Aqueous Nanodroplets

Long wavelength near-infrared and red light-driven consecutive photo-induced electron transfer for highly effective photoredox catalysis

Consecutive photoinduced electron transfer (conPET) processes accumulate the energies of two photons to overcome the thermodynamic limit of traditional photoredox catalysis. However, the excitation wavelength of conPET systems mainly focused on short wavelength visible light, leading to photodamage and incompatibility with large-scale reactions. Herein, we report on conPET systems triggered by near-infrared (NIR) and red light. Specifically, a blue-absorbing conPET photocatalyst, perylene diimide (PDI) is sensitized by a palladium-based photosensitizer to triplet excited state (3PDI*), which generates PDI radical anion (PDI•-) over 100-fold faster than that in the conventional conPET. Accordingly, photoreduction with superior reaction rate and penetration depth, as well as reduced photodamage is detected. More importantly, our work offers comprehensive design rules for the triplet-mediated conPET strategy, whose versatility is confirmed by metal-free dye pairs and NIR-active PtTNP/PDI. Notably, our work achieves NIR-driven atom transfer radical polymerization using an inert aromatic halide as the initiator.

High-efficiency triplet-triplet annihilation upconversion microemulsion with facile preparation and decent air tolerance

Current research of triplet-triplet annihilation upconversion (TTA-UC) faces difficulty such as overuse of organic solvents and quenching of excited triplet sensitizers by molecular oxygen. Herein, we propose an efficient and facile preparation strategy of TTA-UC microemulsion to overcome these issues. With simple device and short preparation process, air-stable TTA-UC with a high upconversion efficiency of 16.52% was achieved in microemulsion coassembled from TritonX114, tetrahydrofuran and upconverting chromophores (platinum octaethyl-porphyrin and 9,10-diphenylanthracene). This is comparable to the highest UC efficiency ever reported for TTA-UC microemulsion systems. The excellent UC performance of TX114-THF could be attributed to two perspectives. Firstly, small-size micelle accommodated chromophores up to high concentrations in organic phase, which promoted efficient molecular collision. Additionally, high absorbance at 532 nm ensured full use of excitation light, getting more long wavelength photons involved in the TTA-UC process. Moreover, air-stable TTA-UC also performed well in microemulsion with various surfactants, including nonionic surfactants (Tween 20, Tween 80, Triton X-110, Triton X-114), ionic surfactants (sodium dodecyl sulfate, cetyltrimethyl ammonium bromide) and block copolymers (pluronic F127, pluronic P123), through three conjectural assembly models according to the structural characteristics of surfactant molecules (concentrated, uncompacted and scattered). These discoveries could provide estimable reference for selection of surfactants in relevant fields of TTA-UC.

Photochemically deoxygenating micelles for protecting TTA-UC against oxygen quenching

Pluronic F127, P123 and cross-linked F127 diacrylate micelles are photochemically deoxygenating nanocapsules in which oxygen could be removed by photochemical reaction with a surfactant and efficient triplet-triplet annihilation photon upconversion (TTA-UC) can be achieved in air. The efficiency of TTA-UC under air is comparable to that under deoxygenated conditions.

Spatially Controlled UV Light Generation at Depth using Upconversion Micelles

UV light can trigger a plethora of useful photochemical reactions for diverse applications, including photocatalysis, photopolymerization, and drug delivery. These applications typically require penetration of high-energy photons deep into materials, yet delivering these photons beyond the surface is extremely challenging due to absorption and scattering effects. Triplet-triplet annihilation upconversion (TTA-UC) shows great promise to circumvent this issue by generating high-energy photons from incident lower-energy photons. However, molecules that facilitate TTA-UC usually have poor water solubility, limiting their deployment in aqueous environments. To address this challenge, a nanoencapsulation method is leveraged to fabricate water-compatible UC micelles, enabling on-demand UV photon generation deep into materials. Two iridium-based complexes are presented for use as TTA-UC sensitizers with increased solubilities that facilitate the formation of highly emissive UV-upconverting micelles. Furthermore, this encapsulation method is shown to be generalizable to nineteen UV-emitting UC systems, accessing a range of upconverted UV emission profiles with wavelengths as low as 350 nm. As a proof-of-principle demonstration of precision photochemistry at depth, UV-emitting UC micelles are used to photolyze a fluorophore at a focal point nearly a centimeter beyond the surface, revealing opportunities for spatially controlled manipulation deep into UV-responsive materials.

Controlling the durability and optical properties of triplet-triplet annihilation upconversion nanocapsules

Deep penetration of high energy photons by direct irradiation is often not feasible due to absorption and scattering losses, which are generally exacerbated as photon energy increases. Precise generation of high energy photons beneath a surface can circumvent these losses and significantly transform optically controlled processes like photocatalysis or 3D printing. Using triplet-triplet annihilation upconversion (TTA-UC), a nonlinear process, we can locally convert two transmissive low energy photons into one high energy photon. We recently demonstrated the use of nanocapsules for high energy photon generation at depth, with durability within a variety of chemical environments due to the formation of a dense, protective silica shell that prevents content leakage and nanocapsule aggregation. Here, we show the importance of the feed concentrations of the tetraethylorthosilicate (TEOS) monomer and the methoxy poly(ethyleneglycol) silane (PEG-silane) ligand used to synthesize these nanocapsules using spectroscopic and microscopy characterizations. At optimal TEOS and PEG-silane concentrations, minimal nanocapsule leakage can be obtained which maximizes UC photoluminescence. We also spectroscopically study the origin of inefficient upconversion from UCNCs made using sub-optimal conditions to probe how TEOS and PEG-silane concentrations impact the equilibrium between productive shell growth and side product formation, like amorphous silica. Furthermore, this optimized fabrication protocol can be applied to encapsulate multiple TTA-UC systems and other emissive dyes to generate anti-Stokes or Stokes shifted emission, respectively. These results show that simple synthetic controls can be tuned to obtain robust, well-dispersed, bright upconverting nanoparticles for subsequent integration in optically controlled technologies.

Nanoengineering Triplet-Triplet Annihilation Upconversion: From Materials to Real-World Applications

Using light to control matter has captured the imagination of scientists for generations, as there is an abundance of photons at our disposal. Yet delivering photons beyond the surface to many photoresponsive systems has proven challenging, particularly at scale, due to light attenuation via absorption and scattering losses. Triplet-triplet annihilation upconversion (TTA-UC), a process which allows for low energy photons to be converted to high energy photons, is poised to overcome these challenges by allowing for precise spatial generation of high energy photons due to its nonlinear nature. With a wide range of sensitizer and annihilator motifs available for TTA-UC, many researchers seek to integrate these materials in solution or solid-state applications. In this Review, we discuss nanoengineering deployment strategies and highlight their uses in recent state-of-the-art examples of TTA-UC integrated in both solution and solid-state applications. Considering both implementation tactics and application-specific requirements, we identify critical needs to push TTA-UC-based applications from an academic curiosity to a scalable technology.

Sensitizer-controlled photochemical reactivity via upconversion of red light

By combining the energy input from two red photons, chemical reactions that would normally require blue or ultraviolet irradiation become accessible. Key advantages of this biphotonic excitation strategy are that red light usually penetrates deeper into complex reaction mixtures and causes less photo-damage than direct illumination in the blue or ultraviolet. Here, we demonstrate that the primary light-absorber of a dual photocatalytic system comprised of a transition metal-based photosensitizer and an organic co-catalyst can completely alter the reaction outcome. Photochemical reductions are achieved with a copper(i) complex in the presence of a sacrificial electron donor, whereas oxidative substrate activation occurs with an osmium(ii) photosensitizer. Based on time-resolved laser spectroscopy, this changeover in photochemical reactivity is due to different underlying biphotonic mechanisms. Following triplet energy transfer from the osmium(ii) photosensitizer to 9,10-dicyanoanthracene (DCA) and subsequent triplet-triplet annihilation upconversion, the fluorescent singlet excited state of DCA triggers oxidative substrate activation, which initiates the cis to trans isomerization of an olefin, a [2 + 2] cycloaddition, an aryl ether to ester rearrangement, and a Newman-Kwart rearrangement. This oxidative substrate activation stands in contrast to the reactivity with a copper(i) photosensitizer, where photoinduced electron transfer generates the DCA radical anion, which upon further excitation triggers reductive dehalogenations and detosylations. Our study provides the proof-of-concept for controlling the outcome of a red-light driven biphotonic reaction by altering the photosensitizer, and this seems relevant in the greater context of tailoring photochemical reactivities.

Photon Upconversion with a Low Threshold Excitation Intensity in Plain Water

A triplet-triplet annihilation-based photon upconversion (TTA-UC) system with a low threshold excitation intensity (I_th) in plain water was developed. Water-soluble anionic porphyrin (PdTPPS^4-) and diphenylanthracene (DCDPA^2-) derivatives were used as light absorbers and emitter molecules, respectively, and no additives such as surfactants were required. The phosphorescence emission from PdTPPS^4- under an excitation wavelength of 528 nm was quenched by DCDPA^2-, resulting in triplet energy transfer, whereas fluorescence from DCDPA^2- was observed in a short wavelength region (400-500 nm). Three independent emission studies utilizing different excitation light sources validated the TTA-UC process in a simple aqueous solution. TTA occurred after the triplet energy transfer, according to the time profiles of phosphorescence and fluorescence detected following pulse laser excitation. The I_th for TTA-UC was estimated to be lower than 6 mW cm^-2, although it could not be exactly determined due to the sensitivity limit of the experimental setup. The upper limit of I_th for the aqueous solution of DCDPA^2- and PdTPPS^4- is the smallest value obtained to date for aqueous systems and comparable to that of high-performance TTA-UC systems in organic solutions.

Direct Exciton Harvesting from a Bound Triplet Pair

Singlet fission is commonly defined as the generation of two triplet excitons from a single absorbed photon. However, ambiguities within this definition arise due to the complexity of the various double triplet states that exist in SF chromophores and the corresponding interconversion processes. To clarify this process, singlet fission is frequently depicted as sequential two-step conversion in which a singlet exciton decays into a bound triplet-pair biexciton state that dissociates into two "free" triplet excitons. However, this model discounts the potential for direct harvesting from the coupled biexciton state. Here, it is demonstrated that individual triplet excitons can be extracted directly from a bound triplet pair. It is demonstrated that due to the requirement for geminate triplet-triplet annihilation in intramolecular singlet fission compounds, unique spectral and kinetic signatures can be used to quantify triplet-pair harvesting yields. An internal quantum efficiency for triplet exciton transfer from the triplet pair of >50%, limited only by the solubility of the compounds is achieved. The harvesting process is not dependent on the net multiplicity of the triplet-pair state, suggesting that an explicit, independent dissociation step is not a requirement for using triplet pairs to do chemical or electrical work.

Photon Upconversion Systems Based on Triplet-Triplet Annihilation as Photosensitizers for Chemical Transformations

Photon upconversion (UC) based on triplet-triplet annihilation (TTA) is considered one of the most attractive methodologies for switching wavelengths from lower to higher energy. This two-photon process, which requires the involvement of a bimolecular system, has been widely used in numerous fields such as bioimaging, solar cells, displays, drug delivery, and so on. In the last years, we have witnessed the harnessing of this concept by the organic community who have developed new strategies for synthetic purposes. Interestingly, the generation of high-energetic species by this phenomenon has provided the opportunity not only to photoredox activate compounds with high-energy demanding bonds, expanding the reactivity window that lies outside the energy window of the initial irradiation wavelength, but also to sensitized conventional photocatalysts through energy transfer processes even employing infrared irradiation. Herein, an overview of the principal examples found in literature is described where TTA-UC systems are found to be suitable photosensitizers for several chemical transformations.

Quantifying the Ligand-Induced Triplet Energy Transfer Barrier in a Quantum Dot-Based Upconversion System

During photon upconversion, quantum dots (QDs) transfer energy to molecules in solution through a long ligand shell. This insulating ligand shell imparts colloidal stability at the expense of efficient photosensitization. For the first time, we quantify the barrier these aliphatic ligands pose for triplet energy transfer in solution. Using transient absorption spectroscopy, we experimentally measure a small damping coefficient of 0.027 Å^-1 for a ligand exceeding 10 carbons in length. The dynamic nature of ligands in solution lowers the barrier to charge or energy transfer compared to organic thin films. In addition, we show that surface ligands shorter than 8 carbons in length allow direct energy transfer from the QD, bypassing the need for a transmitter ligand to mediate energy transfer, leading to a 6.9% upconversion quantum yield compared with 0.01% for ligands with 18 carbons. This experimentally derived insight will enable the design of efficient QD-based photosensitizers for catalysis and energy conversion.

Triplet fusion upconversion nanocapsules for volumetric 3D printing

Three-dimensional (3D) printing has exploded in interest as new technologies have opened up a multitude of applications^1-6, with stereolithography a particularly successful approach^4,7-9. However, owing to the linear absorption of light, this technique requires photopolymerization to occur at the surface of the printing volume, imparting fundamental limitations on resin choice and shape gamut. One promising way to circumvent this interfacial paradigm is to move beyond linear processes, with many groups using two-photon absorption to print in a truly volumetric fashion^3,7-9. Using two-photon absorption, many groups and companies have been able to create remarkable nanoscale structures^4,5, but the laser power required to drive this process has limited print size and speed, preventing widespread application beyond the nanoscale. Here we use triplet fusion upconversion^10-13 to print volumetrically with less than 4 milliwatt continuous-wave excitation. Upconversion is introduced to the resin by means of encapsulation with a silica shell and solubilizing ligands. We further introduce an excitonic strategy to systematically control the upconversion threshold to support either monovoxel or parallelized printing schemes, printing at power densities several orders of magnitude lower than the power densities required for two-photon-based 3D printing.

Microfluidic oxygen tolerability screening of nanocarriers for triplet fusion photon upconversion

The full potential of triplet fusion photon upconversion (TF-UC) of providing high-energy photons locally with low-energy excitation is limited in biomedicine and life sciences by its oxygen sensitivity. This hampers the applicability of TF-UC systems in sensors, imaging, optogenetics and drug release. Despite the advances in improving the oxygen tolerability of TF-UC systems, the evaluation of oxygen tolerability is based on comparing the performance at completely deoxygenated (0% oxygen) and ambient (20-21%) conditions, leaving the physiological oxygen levels (0.3-13.5%) neglected. This oversight is not deliberate and is only the result of the lack of simple and predictable methods to obtain and maintain these physiological oxygen levels in an optical setup. Herein, we demonstrate the use of microfluidic chips made of oxygen depleting materials to study the oxygen tolerability of four different micellar nanocarriers made of FDA-approved materials with various oxygen scavenging capabilities by screening their TF-UC performance over physiological oxygen levels. All nanocarriers were capable of efficient TF-UC even in ambient conditions. However, utilizing oxygen scavengers in the oil phase of the nanocarrier improves the oxygen tolerability considerably. For example, at the mean tumour oxygen level (1.4%), nanocarriers made of surfactants and oil phase both capable of oxygen scavenging retained remarkably 80% of their TF-UC emission. This microfluidic concept enables faster, simpler and more realistic evaluation of, not only TF-UC, but any micro or nanoscale oxygen-sensitive system and facilitates their development and implementation in biomedical and life science applications.

Nanoencapsulated Phase-Change Materials: Versatile and Air-Tolerant Platforms for Triplet-Triplet Annihilation Upconversion

Efficient and long-term stable triplet-triplet annihilation upconversion (TTA-UC) can be achieved by effectively protecting the excited organic triplet ensembles from photoinduced oxygen quenching, and discovery of a new material platform that promotes TTA-UC in ambient conditions is of paramount importance for practical applications. In this study, we present the first demonstration of an organic nonparaffin phase-change material (PCM) as an air-tolerant medium for TTA-UC with a unique solid-liquid phase transition in response to temperature variation. For the proposed concept, 2,4-hexadien-1-ol is used and extensively characterized with several key features, including good solvation capacity, mild melting point (30.5 °C), and exclusive antioxidant property, enabling a high-efficiency, low-threshold, and photostable TTA-UC system without energy-intensive degassing processes. In-depth characterization reveals that the triplet diffusion among the transient species, i.e., ³sensitizer* and ³acceptor*, is efficient and well protected from oxygen quenching in both aerated liquid- and solid-phase 2,4-hexadien-1-ol. We also propose a new strategy for the nanoencapsulation of PCM by employing hollow mesoporous silica nanoparticles as vehicles. This scheme is applicable to both aqueous- and solid-phase TTA-UC systems as well as suitable for various applications, such as thermal energy storage and smart drug delivery.

Magnetic-Field-Switchable Laser via Optical Pumping of Rubrene

Volumetric optical imaging of magnetic fields is challenging with existing magneto-optical materials, motivating the search for dyes with strong magnetic field interactions, distinct emission spectra, and an ability to withstand high photon flux and incorporation within samples. Here, the magnetic field effect on singlet-exciton fission is exploited to demonstrate spatial imaging of magnetic fields in a thin film of rubrene. Doping rubrene with the high-quantum yield dye dibenzotetraphenylperiflanthene (DBP) is shown to enable optically pumped, slab waveguide lasing. This laser is magnetic-field-switchable: when operated just below the lasing threshold, application of a 0.4 T magnetic field switches the device between nonlasing and lasing modes, accompanied by an intensity modulation of +360%. This is thought to be the first demonstration of a magnetically switchable laser, as well as the largest magnetically induced change in emission brightness in a singlet-fission material to date. These results demonstrate that singlet-fission materials are promising materials for magnetic sensing applications and could inspire a new class of magneto-optical modulators.

Block Copolymer Stabilized Liquid Nanodroplets Facilitate Efficient Triplet Fusion-Based Photon Upconversion in Solid Polymer Matrices

Sensitized triplet-triplet annihilation-based photon upconversion is a photophysical process that affords anti-Stokes-shifted emission after annihilation of two metastable triplet excitons of an emitter dye and the formation of a fluorescent singlet state. While this process readily occurs in solutions under conditions where the mobility of the dye molecules is high, particular architectures are required to facilitate efficient energy transfers in solid polymers. One possibility is to incorporate liquid upconverting domains into solid polymer matrices. Another possibility is to reduce the intermolecular distance between the dyes below the Dexter radius, allowing exciton migration via triplet hopping. We introduce herein nanostructured materials that combine both of these features. These glassy nanostructured polymer systems contain liquid upconverting nanodroplets that are stabilized with a block copolymer surfactant and are fabricated under ambient conditions in a facile one-step protocol. The dyes concentrate in the nanostructured liquid domains, and this enables hopping-mediated ET and TTA between the dyes and leads to an upconversion efficiency of ∼20%.

Spatially confined photoexcitation with triplet-triplet annihilation upconversion

Two-photon absorption (TPA) has been widely used in confocal microscopy, photo-initiated three-dimensional (3D) polymerization, and 3D-micro/nanofabrication. These applications are based on the spatial confinement of the TPA excitation, due to the quadratic excitation power dependency of the excitation. However, an expensive and high-power femtosecond (fs) pulsed laser has to be used. Herein, we show a new technique as a promising alternative to the TPA to achieve spatially confined excitation, but no fs laser and TPA dyes are required. This new spatially confined excitation with a continuous wave laser is based on triplet-triplet-annihilation upconversion. The potential of the new technique was demonstrated by spatially confined photopolymerization.

Red-Light-Mediated Photoredox Catalysis Enables Self-Reporting Nitric Oxide Release for Efficient Antibacterial Treatment

Nitric oxide (NO) serves as a key regulator of many physiological processes and as a potent therapeutic agent. The local delivery of NO is important to achieve target therapeutic outcomes due to the toxicity of NO at high concentrations. Although light stimulus represents a non-invasive tool with spatiotemporal precision to mediate NO release, many photoresponsive NO-releasing molecules can only respond to ultraviolet (UV) or near-UV visible light with low penetration and high phototoxicity. We report that coumarin-based NO donors with maximal absorbances at 328 nm can be activated under (deep) red-light (630 or 700 nm) irradiation in the presence of palladium(II) tetraphenyltetrabenzoporphyrin, enabling stoichiometric and self-reporting NO release with a photolysis quantum yield of 8 % via photoredox catalysis. This NO-releasing platform with ciprofloxacin loading can eradicate Pseudomonas aeruginosa biofilm in vitro and treat cutaneous abscesses in vivo.

Triplet Fusion Upconversion with Oxygen Resistance in Aqueous Media

Triplet fusion upconversion (also called triplet-triplet annihilation, TTA) arouses much attention due to its potential in the fields of biological imaging, optogenetics, and light harvesting. However, oxygen quenching remains a challenge ahead, restricting its applications in aqueous media. Previous efforts to realize aqueous TTA with oxygen resistance have been focused on core-shell structures and self-assembly, but tedious processes and complicated chemical modification are required. Here, we report a direct and efficient strategy to realize aqueous TTA by controlling the ionic equilibrium of the TTA dyad. We find that the ionized organic dyad in physiological buffers and electrolyte-based media shows a natural aerotolerance without any complicated structure engineering. In particular, the upconversion intensity of this aqueous TTA in Tris buffer under an air-saturated condition is more than twice that under the deaerated condition. We further demonstrate the TTA system for potential applications in pH and temperature sensing with reversible and sensitive performance. We anticipate this facile approach will inspire the development of practical aqueous TTA and broad applications in biological science.

Near-infrared responsive upconversion glass-ceramic@BiOBr heterojunction for enhanced photodegradation performances of norfloxacin

An efficient luminous and electronic energy transmission BiOBr based near-infrared (NIR) responsive heterojunction photocatalyst was successfully fabricated through growing BiOBr nanosheets on the superficial layer of the SrF₂-Bi₂O₃-B₂O₃/Yb³⁺,Tb³⁺ (SBBF) upconversion glass-ceramic (GC) via a facile in-situ etching GC method (FIEG). A high norfloxacin (NOR) degradation rate of 56% was obtained under 180 min NIR light irradiation for the NIR GC photocatalyst (SBBF/BiOBr-10), and it possesses much enhanced photocatalytic activity compared with that of pure BiOBr under UV-vis-NIR light irradiation. Wherein six intermediate products were identified in the NOR photodegradation process and the possible degradation pathways were proposed. B³⁺, Yb³⁺ and Tb³⁺ ions in GC can be doped into BiOBr layer during the FIEG process. The core-shell structure of the GC@BiOBr heterojunction photocatalyst is in favor of increasing charge transport and reducing the recombination rate of excited carriers, and it efficiently harvests NIR photons to emit UV and visible light upconversion emissions, which can be utilized during the photocatalysis process. The photocatalyst can be facilely regenerated via HBr etching again, moreover, the low-cost and less time requirement promote the possibility of large-scale fabrication of the efficient photocatalysts.

Mechanistic Understanding and Rational Design of Quantum Dot/Mediator Interfaces for Efficient Photon Upconversion

The semiconductor-nanocrystal-sensitized, three-component upconversion system has made great strides over the past 5 years. The three components (i.e., triplet photosensitizer, mediator, and emitter) each play critical roles in determining the input and output photon energy and overall quantum efficiency (QE). The nanocrystal photosensitizer converts the absorbed photon into singlet excitons and then triplet excitons via intersystem crossing. The mediator accepts the triplet exciton via either direct Dexter-type triplet energy transfer (TET) or sequential charge transfer (CT) while extending the exciton lifetime. Through a second triplet energy-transfer step from the mediator to the emitter, the latter is populated in its lowest excited triplet state. Triplet-triplet annihilation (TTA) between two triplet emitters generates the emitter in its bright singlet state, which then emits the upconverted photon. Quantum dots (QD) have a tunable band gap, large extinction coefficient, and small singlet-triplet energy losses compared to metal-ligand charge-transfer complexes. This high triplet exciton yield makes QDs good candidates for photosensitizers. In terms of driving triplet energy transfer, the triplet energy of the mediator should be slightly lower than the triplet exciton energy of the QD sensitizer for a downhill energy landscape with minimal energy loss. The same energy cascade is also required for the transfer from the mediator to the emitter. Finally, the triplet energy of the emitter must be slightly larger than one-half of its singlet energy to ensure that TTA is exothermic. Optimization of the sensitizer, mediator, and emitter will lead to an increase in the anti-Stokes shift and the total quantum efficiency. Evaluating each individual step's efficiency and kinetics is necessary for the understanding of the limiting factors in existing systems.This review summarizes chalcogenide QD-based photon upconversion systems with a focus on the mechanistic aspects of triplet energy transfer conducted by the Tang and Lian groups. Via time-resolved spectroscopy, the rates and major loss pathways associated with the two triplet energy-transfer steps were identified. The studies are focused on the near-infrared (NIR) to visible (VIS) PbS-tetracene-based systems as they allow systematic control of the QD, mediator, and emitter. Our results show that the mediator triplet state is mostly formed by direct TET from the QD and the transfer rate is influenced by the density of bound mediator molecules. Charge transfer, a loss pathway, does not produce triplet excitons and can be minimized by adding an inert shell to the QD. This transfer rate decreases exponentially with the distance between the QD and mediator molecule. The second TET rate was found to be much slower than the diffusion-limited collision rate, which results in the triplet lifetime of the mediator being the main factor limiting its efficiency. Finally, the total quantum efficiency can be calculated using these measured quantities including the TET1 and TET2 efficiencies. The agreement between calculated and measured quantum efficiencies suggests a firm understanding of QD-sensitized photon upconversion. We believe the above conclusions are general and should be widely applicable to similar systems, including singlet fission in hybrid organic-nanocrystal materials.

Innate immune activation by conditioned medium of cancer cells following combined phototherapy with photosensitizer-loaded gold nanorods

Nanoparticle-based phototherapy has evolved to include immunotherapy as an effective treatment combination for cancers through inducing anti-cancer immune activation leading to downstream adaptive responses and immune protection. However, most cancer phototherapy studies that claimed anti-cancer immunogenic effects often included exogenous immunostimulants to potentiate immune responses and did not clearly establish their effects on immune cells. In this study, we showed that combined photodynamic (PDT) and photothermal therapy (PTT) using gold nanorods (NRs) loaded with the photosensitizer chlorin e6 (Ce6) on endogenously formed mouse serum (MS) protein coronas (i.e., NR-MS-Ce6) on EMT6 murine mammary carcinoma cells could potentiate the activation of both J774A.1 macrophages and DC2.4 dendritic cells. The activation of these innate immune cells by the conditioned media from cancer cells treated with combined PDT + PTT was cell-type and number dependent. While treated B16-OVA murine melanoma cells induced lower activation levels for both immune cell types compared to EMT6, they caused higher pro-inflammatory cytokine secretion levels. Our study suggests the importance of immunological investigations to complement any nanoparticle-based therapeutic interventions to better evaluate their efficacy. This could be achieved through a simple approach to screen for the first line of immune responses arising from these therapies prior to in vivo studies.

Molecular Engineering of Chromophores to Enable Triplet-Triplet Annihilation Upconversion

Triplet-triplet annihilation upconversion (TTA-UC) is an unconventional photophysical process that yields high-energy photons from low-energy incident light and offers pathways for innovation across many technologies, including solar energy harvesting, photochemistry, and optogenetics. Within aromatic organic chromophores, TTA-UC is achieved through several consecutive energy conversion events that ultimately fuse two triplet excitons into a singlet exciton. In chromophores where the singlet exciton is roughly isoergic with two triplet excitons, the limiting step is the triplet-triplet annihilation pathway, where the kinetics and yield depend sensitively on the energies of the lowest singlet and triplet excited states. Herein we report up to 40-fold improvements in upconversion quantum yields using molecular engineering to selectively tailor the relative energies of the lowest singlet and triplet excited states, enhancing the yield of triplet-triplet annihilation and promoting radiative decay of the resulting singlet exciton. Using this general and effective strategy, we obtain upconversion yields with red emission that are among the highest reported, with remarkable chemical stability under ambient conditions.

Tuning the Quantum Dot (QD)/Mediator Interface for Optimal Efficiency of QD-Sensitized Near-Infrared-to-Visible Photon Upconversion Systems

Lead sulfide (PbS) quantum dots (QDs) have shown promising performance as a sensitizer in infrared-to-visible photon upconversion systems. To investigate the key design rules, we compare three PbS-sensitized upconversion systems using three mediator molecules with the same tetracene triplet acceptor at different distances from the QD. Using transient absorption spectroscopy, we directly measure the triplet energy-transfer rates and efficiencies from the QD to the mediator and from the mediator to the emitter. With increasing distance between the mediator and PbS QD, the efficiency of the first triplet energy transfer from the QD to the mediator decreases because of a decrease in the rate of this triplet energy-transfer step, while the efficiency of the second triplet energy transfer from the mediator to the emitter increases because of a reduction in the QD-induced mediator triplet state decay. The latter effect is a result of the slow rate constant of the second triplet energy-transfer process, which is 3 orders of magnitude slower than the diffusion-limited value. The combined results lead to a net decrease of the steady-state upconversion quantum yield with distance, which could be predicted by our kinetic model. Our result shows that the QD/mediator interface affects both the first and second triplet energy transfer processes in the photon upconversion system, and the QD/mediator distance has an opposite effect on the efficiencies of the first and second triplet energy transfer. These findings provide important insight for the further rational improvement of the overall efficiency of QD-based upconversion systems.

Peptide assembly assisted triplet-triplet annihilation photon upconversion in non-deoxygenated water

Triplet-triplet annihilation upconversion (TTA-UC) has great potential in many fields. However, a stable TTA-UC system with adjustable UC efficiency in non-deoxygenated water is still in urgent demand. Here, the first example of short peptide-tuned UC luminescence in water is reported. With only a small amount of peptides, UC chromophores can assemble into tetrahedral microrods with adjustable size and UC efficiency. Successful TTA-UC luminescence of these microrods in water is achieved due to the regular and dense organization of molecular upconversion chromophores tuned by peptides, which allows rapid triplet exciton migration, avoids aggregation-induced quenching and screens molecular oxygen to upconversion chromophores.

UV Light Generation and Challenging Photoreactions Enabled by Upconversion in Water

Sensitized triplet-triplet annihilation (sTTA) is the most promising mechanism for pooling the energy of two visible photons, but its applications in solution were so far limited to organic solvents, with a current maximum of the excited-singlet state energy of 3.6 eV. By combining tailor-made iridium complexes with naphthalenes, we demonstrate blue-light driven upconversion in water with unprecedented singlet-state energies approaching 4 eV. The annihilators have outstanding excited-state reactivities enabling challenging photoreductions driven by sTTA. Specifically, we found that an aryl-bromide bond activation can be achieved with blue photons, and we obtained full conversion for the very energy-demanding decomposition of a persistent ammonium compound as typical water pollutant, not only with a cw laser but also with an LED light source. These results provide the first proof-of-concept for the usage of low-power light sources for challenging reactions employing blue-to-UV upconversion in water and pave the way for the further development of sustainable light-harvesting applications.

NIR light-triggered nanomaterials-based prodrug activation towards cancer therapy

Nanomaterials-based prodrug activation systems have been widely explored in cancer therapy, aiming at overcoming limited dosage formulation, systemic toxicity, and insufficient pharmacokinetic performance of parent drugs. For better delivery control, various stimuli systems, especially nanomaterials-based ones, have come to the forefront. Among them, near-infrared (NIR) light takes advantage of on-demand/site-specific regulation and non-invasiveness. In this review, we will address the developments of nanomaterials-based prodrug over the last decade, the activation mechanisms, and bioapplications under NIR light triggering. The advantages and limitations of NIR-triggered prodrug activation strategies and the perspectives of the next-generation prodrug nanomedicine will also be summarized. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Stimuli-Responsive Molecular Photon Upconversion

The addition of stimuli-responsiveness to anti-Stokes emission provides a unique platform for biosensing and chemosensing. Particularly, stimuli-responsive photon upconversion based on triplet-triplet annihilation (TTA-UC) is promising due to its occurrence at low excitation intensity with high efficiency. This Minireview summarizes the recent developments of TTA-UC switching by external stimuli such as temperature, oxygen, chemicals, light, electric field, and mechanical force. For the systematic understanding of the underlying general mechanisms, the switching mechanisms are categorized into four types: 1) aggregation-induced UC; 2) assembly-induced air-stable UC; 3) diffusion-controlled UC; and 4) energy-transfer-controlled UC. The development of stimuli-responsive smart TTA-UC systems would enable sensing with unprecedented sensitivity and selectivity, and expand the scope of TTA-UC photochemistry by combination with supramolecular chemistry, materials chemistry, mechanochemistry, and biochemistry.

Fluorescence upconversion by triplet-triplet annihilation in all-organic poly(methacrylate)-terpolymers

Fluorescence upconversion by triplet-triplet annihilation is demonstrated for a fully polymer-integrated material, i.e. in the limit of restricted diffusion. Organic sensitizer and acceptor are covalently attached to a poly(methacrylate) backbone, yielding a metal-free macromolecular all-in-one system for fluorescence upconversion. Due to the spatial confinement of the optically active molecular components, i.e. annihilator and sensitizer, UC by TTA in the constrained polymer system in solution is achieved at exceptionally low averaged annihilator concentrations. However, the UC quantum yield in the investigated systems is found to be low, highlighting that only chromophores in specific local surroundings yield upconversion in the limit of restricted diffusion. A photophysical model is proposed taking the heterogeneous local environment within the polymers into account.

Impact of t-butyl substitution in a rubrene emitter for solid state NIR-to-visible photon upconversion

Solid state NIR-to-visible photon upconversion (UC) mediated by triplet-triplet annihilation (TTA) is necessitated by numerous practical applications. Yet, efficient TTA-UC remains a highly challenging task. In this work palladium phthalocyanine-sensitized NIR-to-vis solid UC films based on a popular rubrene emitter are thoroughly studied with the primary focus on revealing the impact of t-butyl substitution in rubrene on the TTA-UC performance. The solution-processed UC films were additionally doped with a small amount of emissive singlet sink tetraphenyldibenzoperiflanthene (DBP) for collecting upconverted singlets from rubrene and in this way diminishing detrimental singlet fission. Irrespective of the excitation conditions used, t-butyl-substituted rubrene (TBR) was found to exhibit enhanced TTA-UC performance as compared to that of rubrene at an optimal emitter doping of 80 wt% in polystyrene films. Explicitly, in the TTA dominated regime attained at high excitation densities, 4-fold higher UC quantum yield (ΦUC) achieved in TBR-based films was caused by the reduced fluorescence concentration quenching mainly due to suppressed singlet fission. Under low light conditions, i.e. in the regime governed by spontaneous triplet decay, even though triplet exciton diffusion was obstructed in TBR films by t-butyl moieties, the subsequently reduced TTA rate was counterbalanced by both suppressed singlet fission and non-radiative triplet quenching, still ensuring higher ΦUC of these films as compared to those of unsubstituted rubrene films.

Triplet-Fusion Upconversion Using a Rigid Tetracene Homodimer

We demonstrate that a structurally rigid, weakly coupled molecular dimer can replace traditional monomeric annihilators for triplet fusion upconversion (TUC) in solution by observing emitted photons (λ = 540 nm) from a norbornyl-bridged tetracene homodimer following excitation of a triplet sensitizer at λ = 730 nm. Intriguingly, steady-state spectroscopy, kinetic simulations, and Stern-Volmer quenching experiments show that the dimer exhibits qualitatively different photophysics than its parent monomer: it is less effective at diffusion-mediated triplet exciton transfer, but it fuses extracted triplets more efficiently. Our results support the development of composite triplet-fusion platforms that go beyond diffusion-mediated triplet extraction, ultimately circumventing the concentration dependence of solution-phase TUC.

Achieving spin-triplet exciton transfer between silicon and molecular acceptors for photon upconversion

Inorganic semiconductor nanocrystals interfaced with spin-triplet exciton-accepting organic molecules have emerged as promising materials for converting incoherent long-wavelength light into the visible range. However, these materials to date have made exclusive use of nanocrystals containing toxic elements, precluding their use in biological or environmentally sensitive applications. Here, we address this challenge by chemically functionalizing non-toxic silicon nanocrystals with triplet-accepting anthracene ligands. Photoexciting these structures drives spin-triplet exciton transfer from silicon to anthracene through a single 15 ns Dexter energy transfer step with a nearly 50% yield. When paired with 9,10-diphenylanthracene emitters, these particles readily upconvert 488-640 nm photons to 425 nm violet light with efficiencies as high as 7 ± 0.9% and can be readily incorporated into aqueous micelles for biological use. Our demonstration of spin-triplet exciton transfer from silicon to molecular triplet acceptors can critically enable new technologies for solar energy conversion, quantum information and near-infrared driven photocatalysis.

Engineering Porous Emitting Framework Nanoparticles with Integrated Sensitizers for Low-Power Photon Upconversion by Triplet Fusion

The conversion of low-energy light into photons of higher energy based on sensitized triplet-triplet annihilation (sTTA) upconversion is emerging as the most promising wavelength-shifting methodology because it operates efficiently at excitation powers as low as the solar irradiance. However, the production of solid-state upconverters suited for direct integration in devices is still an ongoing challenge owing to the difficulties concerning the organization of two complementary moieties, the triplet sensitizer, and the annihilator, which must interact efficiently. This problem is solved by fabricating porous fluorescent nanoparticles wherein the emitters are integrated into robust covalent architectures. These emitting porous aromatic framework (ePAF) nanoparticles allow intimate interaction with the included metallo-porphyrin as triplet sensitizers. Remarkably, the high concentration of framed chromophores ensures hopping-mediated triplet diffusion required for TTA, yet the low density of the framework promotes their high optical features without quenching effects, typical of the solid state. A green-to-blue photon upconversion yield as high as 15% is achieved: a record performance among annihilators in a condensed phase. Furthermore, the engineered ePAF architecture containing covalently linked sensitizers produces full-fledge solid-state bicomponent particles that behave as autonomous nanodevices.