Three-Dimensional Tetrathiafulvalene-Based Covalent Organic Frameworks for Tunable Electrical Conductivity

Semiconducting Covalent Organic Frameworks

Semiconductors form the foundational bedrock of modern electronics and numerous cutting-edge technologies. Particularly, semiconductors crafted from organic building blocks hold immense promise as next-generation pioneers, thanks to their vast array of chemical structures, customizable frontier orbital energy levels and bandgap structures, and easily adjustable π electronic properties. Over the past 50 years, advancements in chemistry and materials science have facilitated extensive investigations into small organic π compounds, oligomers, and polymers, resulting in a rich library of organic semiconductors. However, a longstanding challenge persists: how to organize π building units or chains into well-defined π structures, which are crucial for the performance of organic semiconductors. Consequently, the pursuit of methodologies capable of synthesizing and/or fabricating organic semiconductors with ordered structures has emerged as a frontier in organic and polymeric semiconductor research. In this context, covalent organic frameworks (COFs) stand out as unique platforms allowing for the covalent integration of organic π units into periodically ordered π structures, thus facilitating the development of semiconductors with extended yet precisely defined π architectures. Since their initial report in 2008, significant strides have been made in exploring various chemistries to develop semiconducting COFs, resulting in a rich library of structures, properties, functions, and applications. This review provides a comprehensive yet focused exploration of the general structural features of semiconducting COFs, outlining the basic principles of structural design, illustrating the linkage chemistry and synthetic strategies based on typical one-pot polymerization reactions to demonstrate the growth of bulk materials, nanosheets, films, and membranes. By elucidating the interactions between COFs and various entities such as photons, phonons, electrons, holes, ions, molecules, and spins, this review categorizes semiconducting COFs into nine distinct sections: semiconductors, photoconductors, light emitters, sensors, photocatalysts, photothermal conversion materials, electrocatalysts, energy storage electrodes, and radical spin materials, focusing on disclosing structure-originated properties and functions. Furthermore, this review scrutinizes structure-function correlations and highlights the unique features, breakthroughs, and challenges associated with semiconducting COFs. Furnished with foundational knowledges and state-of-the-art insights, this review predicts the fundamental issues to be addressed and outlines future directions for semiconducting COFs, offering a comprehensive overview of this rapidly evolving and remarkable field.

Application of COF Materials in Carbon Dioxide Electrocatalytic Reduction

COFs have become the most attractive frontier research area in heterogeneous catalysis. Since the geometry and electronic structure of COFs are largely determined by their microenvironment, which in turn determines the performance in electrocatalytic processes, the precise integration of atoms of COF building blocks to achieve pre-designed composition, components and functions is the core. This paper focuses on the structural design, synthesis, electrocatalytic mechanism and application of COFs in electrocatalytic CO2RR (types of COFs in electrocatalytic CO2RR, performance evaluation indicators of COFs in electrocatalytic CO2RR, and the relationship between the structure of COFs and electrocatalytic performance). In addition, we also explore the challenges faced by COFs in CO2RR and the corresponding solution strategies. Finally, by highlighting the prospects and challenges of COFs structural regulation, we hope to provide inspiration for the further development of COFs in electrocatalytic applications.

Covalent organic framework nanomaterials: Syntheses, architectures, and applications

Covalent Organic Frameworks (COFs) are characterized by high thermochemical stability, low backbone density, well-controlled physical and chemical properties, large specific surface volume and porosity, permanently open pore structure, and various synthesis strategies. These remarkable attributes confer COFs with significant potential for a myriad of applications ranging from catalysis technology, gas separation and storage, optoelectronic materials, environmental and energy sciences, and biomedical development. There are many synthetic design methods for COF materials, and dynamic covalent chemistry is the scientific basis of COF materials-oriented design, which gives the error correction ability of the covalent assembly process, and is the key to obtaining crystallization and stability at the same time. However, "crystallinity" and "stability" in the synthesis and preparation of COF materials are often like "You can't have your cake and eat it, too": on the one hand, the reversible covalent bonds used in the synthesis of highly crystalline COF framework are easy to decompose under extreme conditions, which greatly limits its application scenarios; On the other hand, although highly stable COF materials can be prepared by using irreversible covalent bonds, it is usually poor crystalline and difficult to have high performance. In addition, the strict deoxygenation operation required for synthesizing COF materials also limits its macro preparation and large-scale application. Therefore, the synthesis strategy and efficient preparation of highly stable and crystalline COF materials are a major obstacle to the practical application of this field. This paper describes the four structures of COF materials, as well as their synthesis methods, electrical energy-storing electrocatalysis, and significant environmental protection applications. The future directions, prospects, and possible barriers to the development of these materials are envisioned in.

Linear Polymer Cathode Materials for Highly Efficient Aqueous Zinc-Ion Batteries: Is the High Active Sites Density Necessary?

Recently, research on aqueous zinc-ion batteries (AZIBs) has always focused on improving the energy storage performance by increasing the number of active sites, particularly in designing organic/polymer materials with a high density of active sites. However, does a higher density of active sites necessarily induce enhanced energy storage performance? To verify this issue, we have designed two linear polymers, where TAPT-DHBQ contains an additional pair of active sites (carbonyl groups) compared to TABQ-DHBQ, with theoretical specific capacities of 545.26 and 379.14 mAh g-1, respectively. Interestingly, the experimental results have deviated with the specific capacities of these polymers being comparable, measuring to be 325 mAh g-1 (TABQ-DHBQ) and 280 mAh g-1 (TAPT-DHBQ). This is attributed to the competition effect between neighboring active sites, which leads to decreased utilization of active sites. As a result, the Zn//TABQ-DHBQ batteries with ZnI2 electrolyte additive have exhibited high specific capacities of 618 and 360 mAh g-1 at the current densities of 1 and 10 A g-1, along with a high energy density of 678.6 Wh kg-1 (1 A g-1). The finding underscores the importance of uniform electron cloud distribution in cathode materials for achieving efficient AZIBs.

Linkage Engineering of Semiconductive Covalent-Organic Frameworks toward Room-Temperature Ppb-Level Selective Ammonia Sensing

Rational design of molecular architectures is crucial for developing advanced materials such as covalent-organic frameworks (COFs) with excellent sensing performance. In this work, two isostructural COFs (β-keto-AnCOF and imine-AnCOF) with the same conjugated linkers but distinct linkages are constructed. Although both COFs have porous structure and semiconductor behavior conferred by the identical conjugated backbones, β-keto-AnCOF with ─C═O side groups exhibits superior room-temperature ammonia (NH3) sensing performance than imine-AnCOF and even the state-of-the-art dynamic and commercial NH3 sensors, i.e., high sensitivity up to 18.94% ppm-1, ultralow experimental detection limit of 1 ppb, outstanding selectivity, and remarkable response stability and reproducibility after 180 days. In situ spectroscopy and theoretical calculation reveal that the additional charge transfer between NH3 and ─C═O sites in β-keto-AnCOF effectively increases the distance between Fermi level and the valence band, enabling highly-sensitive NH3 detection at ppb levels. This work provides novel molecular architectures for next-generation high-performance sensors.

Covalent Organic Frameworks for Boosting H2O2 Photosynthesis via the Synergy of Multiple Charge Transfer Channels and Polarized Field

Covalent organic frameworks (COFs) serve as one of the most promising candidates for hydrogen peroxide (H2O2) photosynthesis, while attaining high-performance COFs remains a formidable challenge due to the insufficient separation of photogenerated charges. Here, through the rational design of bicarbazole-based COFs (Cz-COFs), we showcase the first achievement in piezo-photocatalytic synthesis of H2O2 using COFs. Noteworthily, the ethenyl group-modified Cz-COFs (COF-DH-Eth) demonstrates a record-high yield of H2O2 (9212 μmol g-1 h-1) from air and pure water through piezo-photocatalysis, which is ca. 2.5 times higher than that of pristine Cz-COFs without ethenyl groups (COF-DH-H) under identical condition and COF-DH-Eth without ultrasonic treatment. The H2O2 production rate originates from the synergistic effect between an ultrasonication-induced polarized electric field and the spatially separated multiple charge transfer channels, which significantly promote the utilization of photogenerated electrons by directional transfer from bicarbazole groups to the ethenyl group-modified benzene rings. Several Cz-COFs and bifluorenylidene-based COFs (COF-BFTB-H) with similar twisted monomers exhibit obvious piezoelectric performance for promoting H2O2 generation, signifying that organic ligands with a twistable structure play a crucial role in creating broken symmetry structures, thereby establishing piezoelectric properties in COFs.

Integrating Multiple Redox-Active Units into Conductive Covalent Organic Frameworks for High-Performance Sodium-Ion Batteries

The rational design of porous covalent organic frameworks (COFs) with high conductivity and reversible redox activity is the key to improving their performance in sodium-ion batteries (SIBs). Herein, we report a series of COFs (FPDC-TPA-COF, FPDC-TPB-COF, and FPDC-TPT-COF) based on an organosulfur linker, (trioxocyclohexane-triylidene)tris(dithiole-diylylidene))hexabenzaldehyde (FPDC). These COFs feature two-dimensional crystalline structures, high porosity, good conductivity, and densely packed redox-active sites, making them suitable for energy storage devices. Among them, FPDC-TPT-COF demonstrates a remarkably high specific capacity of 420 mAh g-1 (0.2 A g-1), excellent cycling stability (~87 % capacity retention after 3000 cycles, 1.0 A g-1) and high rate performance (339 mAh g-1 at 2.0 A g-1) as an anode for SIBs, surpassing most reported COF-based electrodes. The superior performance is attributed to the dithiole moieties enhancing the conductivity and the presence of redox-active carbonyl, imine, and triazine sites facilitating Na storage. Furthermore, the sodiation mechanism was elucidated through in situ experiments and density functional theory (DFT) calculations. This work highlights the advantages of integrating multiple functional groups into redox-active COFs for the rational design of efficient and stable SIBs.

Exploring high-connectivity three-dimensional covalent organic frameworks: topologies, structures, and emerging applications

Covalent organic frameworks (COFs) represent a highly versatile class of crystalline porous materials, formed by the deliberate assembly of organic building units into ordered two-dimensional (2D) and three-dimensional (3D) structures. Their unique combination of topological precision and tunable micro- or mesoporous architectures offers unmatched flexibility in material design. By selecting specific building units, reactive sites, and functional groups, COFs can be engineered to achieve customized skeletal, porous, and interfacial properties, opening the door to materials with optimized performance for diverse applications. Among recent advances, high-connectivity 3D COFs have emerged as a particularly exciting development, with their intricate network structures enabling unprecedented levels of structural complexity, stability, and functionality. This review provides a comprehensive overview of the synthesis strategies, topological design principles, structural characterization techniques, and emerging applications of high-connectivity 3D COFs. We explore their potential across a broad range of cutting-edge applications, including gas adsorption and separation, macromolecule adsorption, dye removal, photocatalysis, electrocatalysis, lithium-sulfur batteries, and charge transport. By examining these key areas, we aim to deepen the understanding of the intricate relationship between structure and function, guiding the rational design of next-generation COF materials. The continued advancements in this field hold immense promise for revolutionizing sectors such as energy storage, catalysis, and molecular separation, making high-connectivity 3D COFs a cornerstone for future technological innovations.

Ultrahigh-surface area covalent organic frameworks for methane adsorption

Developing porous materials with ultrahigh surface areas for gas storage (for example, methane) is attractive but challenging. Here, we report two isostructural three-dimensional covalent organic frameworks (COFs) with a rare self-catenated alb-3,6-Ccc2 topology and a pore size of 1.1 nanometer. Notably, these imine-linked microporous COFs show both high gravimetric Brunauer-Emmett-Teller (BET) surface areas (~4400 square meters per gram) and volumetric BET surface areas (~1900 square meters per cubic centimeter). Moreover, their volumetric methane uptake reaches up to 264 cubic centimeter (standard temperature and pressure) per cubic centimeter [cm3 (STP) cm-3] at 100 bar and 298 kelvin, and they exhibit the highest volumetric working capacity of 237 cm3 (STP) cm-3 at 5 to 100 bar and 298 kelvin among all reported porous crystalline materials.

Recent advances on COF-based single-atom and dual-atom sites for oxygen catalysis

Covalent organic frameworks (COFs) have emerged as promising platforms for the construction of single-atom and dual-atom catalysts (SACs and DACs), owing to their well-defined structures, tunable pore sizes, and abundant active sites. In recent years, the development of COF-based SACs and DACs as highly efficient catalysts has witnessed a remarkable surge. The synergistic interplay between the metal active sites and the COF has established the design and fabrication of COF-based SACs and DACs as a prominent research area in electrocatalysis. These catalytic materials exhibit promising prospects for applications in energy storage and conversion devices. This review summarizes recent advances in the design, synthesis, and applications of COF-based SACs and DACs for oxygen catalysis. The catalytic mechanisms of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are comprehensively explored, providing a comparative analysis to elucidate the correlation between the structure and performance, as well as their functional attributes in battery devices. This review highlights a promising approach for future research, emphasizing the necessity of rational design, breakthroughs, and in-situ characterization to further advance the development of high-performance COF-based SACs and DACs for sustainable energy applications.

Multi-Functional 2D Covalent Organic Frameworks with Diketopyrrolopyrrole as Electron Acceptor

2D covalent organic framework (COF) materials with extended conjugated structure and periodic columnar π-arrays exhibit promising applications in organic optoelectronics. However, there is a scarcity of reports on optoelectronic COFs, mainly due to the lack of suitable π-skeletons. Here, two multi-functional optoelectronic 2D COFs DPP-TPP-COF and DPP-TBB-COF are constructed with diketopyrrolopyrrole as electron acceptor (A), and 1,3,6,8-tetraphenylpyrene and 1,3,5-triphenylbenzene as electron donor (D) through imine bonds. Both 2D COFs showed good crystallinities and AA stacking with a rhombic framework for DPP-TPP-COF and hexagonal one for DPP-TBB-COF, respectively. The electron D-A and ordered intermolecular packing structures endow the COFs with broad UV-vis absorptions and narrow bandgaps along with suitable HOMO/LUMO energy levels, resulting in multi-functional optoelectronic properties, including photothermal conversion, supercapacitor property, and ambipolar semiconducting behavior. Among them, DPP-TPP-COF exhibits a high photothermal conversion efficiency of 47% under 660 nm laser irradiation, while DPP-TBB-COF exhibits superior specific capacitance of 384 F g-1. Moreover, P-type doping and N-type doping are achieved by iodine and tetrakis(dimethylamino)ethylene on a single host COF, resulting in ambipolar semiconducting behavior. These results provide a paradigm for the application of multi-functional optoelectronic COF materials.

Enhancing Lithium-Sulfur Battery Performance with MXene: Specialized Structures and Innovative Designs

Established in 1962, lithium-sulfur (Li-S) batteries boast a longer history than commonly utilized lithium-ion batteries counterparts such as LiCoO2 (LCO) and LiFePO4 (LFP) series, yet they have been slow to achieve commercialization. This delay, significantly impacting loading capacity and cycle life, stems from the long-criticized low conductivity of the cathode and its byproducts, alongside challenges related to the shuttle effect, and volume expansion. Strategies to improve the electrochemical performance of Li-S batteries involve improving the conductivity of the sulfur cathode, employing an adamantane framework as the sulfur host, and incorporating catalysts to promote the transformation of lithium polysulfides (LiPSs). 2D MXene and its derived materials can achieve almost all of the above functions due to their numerous active sites, external groups, and ease of synthesis and modification. This review comprehensively summarizes the functionalization advantages of MXene-based materials in Li-S batteries, including high-speed ionic conduction, structural diversity, shuttle effect inhibition, dendrite suppression, and catalytic activity from fundamental principles to practical applications. The classification of usage methods is also discussed. Finally, leveraging the research progress of MXene, the potential and prospects for its novel application in the Li-S field are proposed.

Design of Three-Dimensional Mesoporous Adamantane-Based Covalent Organic Framework with Exceptionally High Surface Areas

The development of three-dimensional (3D) covalent organic frameworks (COFs) with large pores and high specific surface areas is of critical for practical applications. However, it remains a tremendous challenge to reconcile the contradiction between high porosity and high specific surface areas, and increasing the length of building blocks leads to structural interpenetration in 3D COFs. Here, we report the preparation of mesoporous three-dimensional COF by a new steric hindrance engineering method. By incorporating adamantane into the monomers instead of carbon centers, we successfully achieve 2-fold interpenetrated diamondoid-structured 3D COFs, featuring permanent mesopores (up to 33 Å), exceptionally high surface areas (>3400 m2 g-1), and low crystal densities (0.123 g cm-3). These properties far surpass those of most conventional 3D COFs with similar topologies. This work not only aims to construct 3D COFs with low interpenetration but also to establish a foundation for the systematic design and structural control of 3D COFs.

New Advances in Covalent Network Polymers via Dynamic Covalent Chemistry

Covalent network polymers, as materials composed of atoms interconnected by covalent bonds in a continuous network, are known for their thermal and chemical stability. Over the past two decades, these materials have undergone significant transformations, gaining properties such as malleability, environmental responsiveness, recyclability, crystallinity, and customizable porosity, enabled by the development and integration of dynamic covalent chemistry (DCvC). In this review, we explore the innovative realm of covalent network polymers by focusing on the recent advances achieved through the application of DCvC. We start by examining the history and fundamental principles of DCvC, detailing its inception and core concepts and noting its key role in reversible covalent bond formation. Then the reprocessability of covalent network polymers enabled by DCvC is thoroughly discussed, starting from the significant milestones that marked the evolution of these polymers and progressing to their current trends and applications. The influence of DCvC on the crystallinity of covalent network polymers is then reviewed, covering their bond diversity, synthesis techniques, and functionalities. In the concluding section, we address the current challenges faced in the field of covalent network polymers and speculates on potential future directions.

3D Covalent Organic Frameworks from Design, Synthesis to Applications in Optoelectronics

Covalent organic frameworks (COFs), a new class of crystalline materials connected by covalent bonds, have been developed rapidly in the past decades. However, the research on COFs is mainly focused on two-dimensional (2D) COFs, and the research on three-dimensional (3D) COFs is still in the initial stage. In 2D COFs, the covalent bonds exist only in the 2D flakes and can form 1D channels, which hinder the charge transport to some extent. In contrast, 3D COFs have a more complex pore structure and thus exhibit higher specific surface area and richer active sites, which greatly enhance the 3D charge carrier transport. Therefore, compared to 2D COFs, 3D COFs have stronger applicability in energy storage and conversion, sensing, and optoelectronics. In this review, it is first introduced the design principles for 3D COFs, and in particular summarize the development of conjugated building blocks in 3D COFs, with a special focus on their application in optoelectronics. Subsequently, the preparation of 3D COF powders and thin films and methods to improve the stability and functionalization of 3D COFs are summarized. Moreover, the applications of 3D COFs in electronics are outlined. Finally, conclusions and future research directions for 3D COFs are presented.

Accessible Tetrathiafulvalene Moieties in a 3D Covalent Organic Framework for Enhanced Near-Infrared Photo-Thermal Conversion and Photo-Electrical Response

Redox-active tetrathiafulvalene (TTF)-based covalent organic frameworks (COFs) exhibit distinctive electrochemical and photoelectrical properties, but their prevalent two-dimensional (2D) structure with densely packed TTF moieties limits the accessibility of redox center and constrains their potential applications. To overcome this challenge, an 8-connected TTF linker (TTF-8CHO) is designed as a new building block for the construction of three-dimensional (3D) COFs. This approach led to the successful synthesis of a 3D COF with the bcu topology, designated as TTF-8CHO-COF. In comparison to its 2D counterpart employing a 4-connected TTF linker, the 3D COF design enhances access to redox sites, facilitating controlled oxidation by I2 or Au3+ to tune physical properties. When irradiated with a 0.7 W cm-2 808 nm laser, the oxidized 3D COF samples (I X - ${\mathrm{I}}_{\mathrm{X}}^{-}$ @TTF-8CHO-COF and Au NPs@TTF-8CHO-COF) demonstrated rapid temperature increases of 239.3 and 146.1 °C, respectively, which surpassed those of pristine 3D COF (65.6 °C) and the 2D COF counterpart (6.4 °C increment after I2 treatment). Furthermore, the oxidation of the 3D COF heightened its photoelectrical responsiveness under 808 nm laser irradiation. This augmentation in photothermal and photoelectrical response can be attributed to the higher concentration of TTF·+ radicals generated through the oxidation of well-exposed TTF moieties.

Terahertz Conductivity of Free-Standing 3D Covalent Organic Framework Membranes Fabricated via Triple-Layer-Dual Interfacial Approach

Processable covalent organic framework membranes (COFM) are emerging as potential semiconducting materials for device applications. Nevertheless, the fabrication of crystalline and free-standing 3D COFMs is challenging. In this work, a unique time and solvent-efficient triple-layer-dual interfacial (TLDI) approach for the simultaneous synthesis of two 3D COFMs from a single system is developed. Besides, for the first time, the optical conductivity of these free-standing 3D COFMs is analyzed using terahertz (THz) spectroscopy in transmission mode. Interestingly, these membranes show excellent transmittance at THz frequencies with very high intrinsic THz conductivities. The evaluated scattering time and plasma frequency of the free carriers of the COFMs are highly promising for future applications in optoelectronic devices in THz frequencies.

Crystalline, Porous Helicene Covalent Organic Frameworks

Helicenes are a class of fascinating chiral helical molecules with rich chemistry developed continuously over the past 100 years. Their helical, conjugated, and twisted structures make them attractive for constructing molecular systems. However, studies over the past century are mainly focused on synthesizing helicenes with increased numbers of aromatic rings and complex heterostructures, while research on inorganic, organic, and polymeric helicene materials is still embryonic. Herein, we report the first examples of helicene covalent organic frameworks, i.e., [7]Helicene sp2 c-COF-1, by condensing [7]Helicene dialdehyde with trimethyl triazine via the C=C bond formation reaction under solvothermal conditions. The resultant [7]Helicene sp2 c-COF-1 exhibits prominent X-ray diffraction peaks and assumes a highly ordered 2D lattice structure originated from the twisted configuration of [7]Helicene unit. The C=C linked [7]Helicene sp2 c-COF-1 materials exhibited extended π conjugation and broadly tuned their absorption, emission, redox activity, photoconductivity, and light-emitting activity, demonstrating rich multifunctionalities and great potentials in developing various applications. This work opens a way to a new family of COFs as well as helicene materials, enabling the exploration of unprecedented π architectures and properties.

Bimetallic CoCu nanoparticles anchored on COF/SWCNT for electrochemical detection of carbendazim

Carbendazim (CBZ) is a widespread fungicide used in crop protection, but the CBZ residues in drinking water, fruits, and vegetables can also cause adverse impacts on public health due to direct exposure. In this paper, a ternary synergistic composite of bimetallic CoCu nanoparticles anchored on covalent organic framework/single-walled carbon nanotube (CoCu/COF/SWCNT) was prepared and further applied as an electrochemical sensing platform for detecting CBZ. The sensor showed a sensitive response performance toward CBZ oxidation, as a result of the enhanced charge transfer ability, large electrochemically active surface area, and high electro-catalytic activity from the rational integration of the ternary components in CoCu/COF/SWCNT. Under the optimal conditions, the proposed sensor exhibited a detection range of 0.001 to 10 μM and a limit detection of 0.65 nM for CBZ detection. In addition, the sensor displayed practical feasibility for the determination of CBZ in water and pear samples with a recovery of 96.1 % to 102.1 %.

Combination of covalent organic frameworks (COFs) and polyoxometalates (POMs): the preparation strategy and potential application of COF-POM hybrids

Both covalent organic frameworks (COFs) and polyoxometalates (POMs) show excellent properties and application potential in many fields, thus receiving widespread attention. In recent years, COF-POM hybrid materials were prepared by combining COFs and POMs through physical or chemical methods. COF-POM hybrids have shown high performance in many fields, such as catalysis, sensing, energy storage, and biomedicine. In this review, we introduced the preparation strategy and application of COF-POM hybrids in detail. We believe that the combination of COFs and POMs will provide more abundant functions and broad application prospects.

Covalent organic frameworks for CO2 capture: from laboratory curiosity to industry implementation

CO2 concentration in the atmosphere has increased by about 40% since the 1960s. Among various technologies available for carbon capture, adsorption and membrane processes have been receiving tremendous attention due to their potential to capture CO2 at low costs. The kernel for such processes is the sorbent and membrane materials, and tremendous progress has been made in designing and fabricating novel porous materials for carbon capture. Covalent organic frameworks (COFs), a class of porous crystalline materials, are promising sorbents for CO2 capture due to their high surface area, low density, controllable pore size and structure, and preferable stabilities. However, the absence of synergistic developments between materials and engineering processes hinders achieving the qualitative leap for net-zero emissions. Considering the lack of a timely review on the combination of state-of-the-art COFs and engineering processes, in this Tutorial Review, we emphasize the developments of COFs for meeting the challenges of carbon capture and disclose the strategies of fabricating COFs for realizing industrial implementation. Moreover, this review presents a detailed and basic description of the engineering processes and industrial status of carbon capture. It highlights the importance of machine learning in integrating simulations of molecular and engineering levels. We aim to stimulate both academia and industry communities for joined efforts in bringing COFs to practical carbon capture.

A Mixed Protonic-Electronic Conductor Base on the Host-Guest Architecture of 2D Metal-Organic Layers and Inorganic Layers

The key to designing and fabricating highly efficient mixed protonic-electronic conductors materials (MPECs) is to integrate the mixed conductive active sites into a single structure, to break through the shortcomings of traditional physical blending. Herein, based on the host-guest interaction, an MPEC is consisted of 2D metal-organic layers and hydrogen-bonded inorganic layers by the assembly methods of layered intercalation. Noticeably, the 2D intercalated materials (≈1.3 nm) exhibit the proton conductivity and electron conductivity, which are 2.02 × 10^-5 and 3.84 × 10^-4 S cm^-1 at 100 °C and 99% relative humidity, much higher than these of pure 2D metal-organic layers (>>1.0 × 10^-10 and 2.01×10^-8 S cm^-1 ), respectively. Furthermore, combining accurate structural information and theoretical calculations reveals that the inserted hydrogen-bonded inorganic layers provide the proton source and a networks of hydrogen-bonds leading to efficient proton transport, meanwhile reducing the bandgap of hybrid architecture and increasing the band electron delocalization of the metal-organic layer to greatly elevate the electron transport of intrinsic 2D metal-organic frameworks.

In Situ Rapid Electrochemical Fabrication of Porphyrin-Based Covalent Organic Frameworks: Novel Fibers for Electro-Enhanced Solid-Phase Microextraction

Electro-enhanced solid-phase microextraction (EE-SPME) is a bright separation and enrichment technique that integrates solid-phase microextraction with the electric field. It retains the excellent extraction performance of SPME technology while having the advantages of efficient driving of electric field and special interaction between the electric field and electrons in the molecules of material structure. Replacing conventional SPME fibers with highly efficient and highly conductive original EE-SPME fibers is critical for the practical applications of these technologies. Here, a novel fiber preparation strategy was proposed to obtain a highly conductive porphyrin-based covalent organic framework (POR-COF) by one-step electropolymerization. Benefiting from the excellent semiconducting properties of porphyrin groups, the POR-COF can be spontaneously polymerized on the fiber surface under an appropriate voltage within a few hours. Its performance was evaluated by the EE-SPME of phthalate esters (PAEs) from food and environmental samples, followed by gas chromatography-tandem triple quadrupole mass spectrometry (GC-MS/MS) technology. The results showed that the POR-COF fiber has been successfully used for the detection of trace PAEs in beverages, industrial wastewater, lake water, and oyster samples with high adsorption selectivity and satisfactory sensitivity. The remarkable extraction properties are mainly attributed to the synergistic effect from material characteristics and electrical parameters' control in the extraction process. The presented strategy for the controlled design and synthesis of highly conductive porphyrin-based covalent organic framework fibers offers prospects in developing EE-SPME technologies.

Flexible three-dimensional covalent organic frameworks for ultra-fast and selective extraction of uranium via hydrophilic engineering

It has been considered challenging to develop ideal adsorbents for efficient and lower adsorption time uranium extraction, especially 3D covalent organic frameworks with interpenetrating topologies and tunable porous structures. Here, a "soft" three-dimensional (3D) covalent organic framework (TAM-DHBD) with a fivefold interpenetrating structure is prepared as a novel porous platform for the efficient extraction of radioactive uranium. The resultant TAM-DHBD appears exceptional crystallinity, prominent porosity and excellent chemical stability. Based on the strong mutual coordination between phenolic-hydroxyl/imine-N on the main chain and uranium, TAM-DHBD can effectively avert the competition of other ions, showing high selectivity for uranium extraction. Impressively, the 3D ultra-hydrophilic transport channels and multi-directional uniform pore structure of TAM-DHBD lay the foundation for the ultra-high-speed diffusion of uranium (the adsorption equilibrium can be reached within 60 min under a high-concentration environment). Furthermore, the utilization of lightweight structure not only increases the adsorption site density, but renders the adsorption process flexible, achieving a breakthrough adsorption capacity of 1263.8 mg g^-1. This work not only highlights new opportunities for designing microporous 3D COFs, but paves the way for the practical application of 3D COFs for uranium adsorption.

Connecting the dots for fundamental understanding of structure-photophysics-property relationships of COFs, MOFs, and perovskites using a Multiparticle Holstein Formalism

Photoactive organic and hybrid organic-inorganic materials such as conjugated polymers, covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and layered perovskites, display intriguing photophysical signatures upon interaction with light. Elucidating structure-photophysics-property relationships across a broad range of functional materials is nontrivial and requires our fundamental understanding of the intricate interplay among excitons (electron-hole pair), polarons (charges), bipolarons, phonons (vibrations), inter-layer stacking interactions, and different forms of structural and conformational defects. In parallel with electronic structure modeling and data-driven science that are actively pursued to successfully accelerate materials discovery, an accurate, computationally inexpensive, and physically-motivated theoretical model, which consistently makes quantitative connections with conceptually complicated experimental observations, is equally important. Within this context, the first part of this perspective highlights a unified theoretical framework in which the electronic coupling as well as the local coupling between the electronic and nuclear degrees of freedom can be efficiently described for a broad range of quasiparticles with similarly structured Holstein-style vibronic Hamiltonians. The second part of this perspective discusses excitonic and polaronic photophysical signatures in polymers, COFs, MOFs, and perovskites, and attempts to bridge the gap between different research fields using a common theoretical construct - the Multiparticle Holstein Formalism. We envision that the synergistic integration of state-of-the-art computational approaches with the Multiparticle Holstein Formalism will help identify and establish new, transformative design strategies that will guide the synthesis and characterization of next-generation energy materials optimized for a broad range of optoelectronic, spintronic, and photonic applications.

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm^-2 . DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.

Three-Dimensional Covalent Organic Frameworks: From Synthesis to Applications

Three-dimensional covalent organic frameworks (3D COFs) with spatially periodic networks demonstrate significant advantages over their 2D counterparts, including enhanced specific surface areas, interconnected channels, and more sufficiently exposed active sites. Nevertheless, research on these materials has met an impasse due to serious problems in crystallization and stability, which must be solved for practical applications. In this Minireview, we first summarize some strategies for preparing functional 3D COFs, including crystallization techniques and functionalization methods. Hereafter, applications of these functional materials are presented, covering adsorption, separation, catalysis, fluorescence, sensing, and batteries. Finally, the future challenges and perspectives for the development of 3D COFs are discussed.

Conductive and Ultrastable Covalent Organic Framework/Carbon Hybrid as an Ideal Electrocatalytic Platform

Developing covalent organic frameworks (COFs) with good electrical conductivity is essential to widen their range of practical applications. Thermal annealing is known to be a facile approach for enhancing conductivity. However, at higher temperatures, most COFs undergo amorphization and/or thermal degradation because of the lack of linker rigidity and physicochemical stability. Here, we report the synthesis of a conductive benzoxazole-linked COF/carbon hybrid material (BCOF-600C) by simple thermal annealing. The fused-aromatic benzoxazole and biphenyl building units endow the resulting COF with excellent physicochemical stability against high temperatures and strong acids/bases. This allows heat treatment to further enhance electrical conductivity with minimal structural alteration. The robust crystalline structure with periodically incorporated nitrogen atoms allowed platinum (Pt) atoms to be atomically integrated into the channel walls of BCOF-600C. The resulting electrocatalyst with well-defined active sites exhibited superior catalytic performance toward hydrogen evolution in acidic media.

Conjugated Three-Dimensional High-Connected Covalent Organic Frameworks for Lithium-Sulfur Batteries

Developing conjugated three-dimensional (3D) covalent organic frameworks (COFs) still remains an extremely difficult task due to the lack of enough conjugated 3D building blocks. Herein, condensation between an 8-connected pentiptycene-based D_2h building block (DMOPTP) and 4-connected square-planar linkers affords two 3D COFs (named 3D-scu-COF-1 and 3D-scu-COF-2). A combination of the 3D homoaromatic conjugated structure of the former building block with the 2D conjugated structure of the latter linking units enables the π-electron delocalization over the whole frameworks of both COFs, endowing them with excellent conductivities of 3.2-3.5 × 10^-5 S cm^-1. In particular, the 3D rigid quadrangular prism shape of DMOPTP guides the formation of a twofold interpenetrated scu 3D topology and high-connected permanent porosity with a large Brunauer-Emmett-Teller (BET) surface area of 2340 and 1602 m² g^-1 for 3D-scu-COF-1 and 3D-scu-COF-2, respectively, ensuring effective small molecule storage and mass transport characteristics. This, in combination with their good charge transport properties, renders them promising sulfur host materials for lithium-sulfur batteries (LSBs) with high capacities (1035-1155 mA h g^-1 at 0.2 C, 1 C = 1675 mA g^-1), excellent rate capabilities (713-757 mA h g^-1 at 5.0 C), and superior cycling stability (71-83% capacity retention at 2.0 C after 500 cycles), surpassing the most of organic LSB cathodes reported thus far.

Nanocellulose Paper Semiconductor with a 3D Network Structure and Its Nano-Micro-Macro Trans-Scale Design

Semiconducting nanomaterials with 3D network structures exhibit various fascinating properties such as electrical conduction, high permeability, and large surface areas, which are beneficial for adsorption, separation, and sensing applications. However, research on these materials is substantially restricted by the limited trans-scalability of their structural design and tunability of electrical conductivity. To overcome this challenge, a pyrolyzed cellulose nanofiber paper (CNP) semiconductor with a 3D network structure is proposed. Its nano-micro-macro trans-scale structural design is achieved by a combination of iodine-mediated morphology-retaining pyrolysis with spatially controlled drying of a cellulose nanofiber dispersion and paper-crafting techniques, such as microembossing, origami, and kirigami. The electrical conduction of this semiconductor is widely and systematically tuned, via the temperature-controlled progressive pyrolysis of CNP, from insulating (1012 Ω cm) to quasimetallic (10-2 Ω cm), which considerably exceeds that attained in other previously reported nanomaterials with 3D networks. The pyrolyzed CNP semiconductor provides not only the tailorable functionality for applications ranging from water-vapor-selective sensors to enzymatic biofuel cell electrodes but also the designability of macroscopic device configurations for stretchable and wearable applications. This study provides a pathway to realize structurally and functionally designable semiconducting nanomaterials and all-nanocellulose semiconducting technology for diverse electronics.

2D Microporous Covalent Organic Frameworks as Cobalt Nanoparticle Supports for Electrocatalytic Hydrogen Evolution Reaction

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers, which are considered to be excellent supports for metal nanoparticles (MNPs) due to their highly ordered structure, chemical tunability, and porosity. In this work, two novel ultra-microporous COFs, JUC−624 and JUC−625, with narrow pore size distribution have been synthesized and used for the confined growth of ultrafine Co nanoparticles (CoNPs) with high loading. In an alkaline environment, the produced materials were investigated as electrocatalysts for the hydrogen evolution reaction (HER). Electrochemical test results show that CoNPs@COFs have a Tafel slope of 84 mV·dec−1, an onset overpotential of 105 mV, and ideal stability. Remarkably, CoNPs@JUC−625 required only 146 mV of overpotential to afford a current density of 10 mA cm−2. This research will open up new avenues for making COF-supported ultrafine MNPs with good dispersity and stability for extensive applications.

Interplay of Electronic and Geometric Structure Tunes Organic Biradical Character in Bimetallic Tetrathiafulvalene Tetrathiolate Complexes

The synthesis and design of organic biradicals with tunable singlet-triplet gaps have become the subject of significant research interest, owing to their possible photochemical applications and use in the development of molecular switches and conductors. Recently, tetrathiafulvalene tetrathiolate (TTFtt) has been demonstrated to exhibit such organic biradical character in doubly ionized bimetallic complexes. In this article we use high-level ab initio calculations to interrogate the electronic structure of a series of TTFtt-bridged metal complexes, resolving the factors governing their biradical character and singlet-triplet gaps. We show that the degree of biradical character correlates with a readily measured experimental predictor, the central TTFtt C-C bond length, and that it may be described by a one-parameter model, providing valuable insight for the future rational design of TTFtt based biradical compounds and materials.

Recent Progress in External-Stimulus-Responsive 2D Covalent Organic Frameworks

Recently, smart 2D covalent organic frameworks (COFs), combining the advantages of both inherent structure features and functional building blocks, have been demonstrated to show reversible changes in conformation, color, and luminescence in response to external stimuli. This review provides a summary on the recent progress of 2D COFs that are responsive to external stimuli such as metal ions, gas molecules, pH values, temperature, electricity, light, etc. Moreover, the responsive mechanisms and design strategies, along with the applications of these stimulus-responsive 2D COFs in chemical sensors and photoelectronic devices are also discussed. It is believed that this review would provide some guidelines for designing novel single-/multistimulus-responsive 2D COFs with controllable responsive behaviors for advanced photoelectronic applications.

Redox-Active Covalent Organic Frameworks with Nickel-Bis(dithiolene) Units as Guiding Layers for High-Performance Lithium Metal Batteries

Combining the chemistry of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) can bring new opportunities for the design of advanced materials with enhanced tunability and functionality. Herein, we constructed two COFs based on Ni-bis(dithiolene) units and imine bonds, representing a bridge between traditional MOFs and COFs. The Ni-bis(dithiolene)tetrabenzaldehyde as the 4-connected linker was initially synthesized, which was further linked by 4-connected tetra(aminophenyl)pyrene (TAP) or 3-connected tris(aminophenyl)amine (TAA) linkers into two COFs, namely, Ni-TAP and Ni-TAA. Ni-TAP shows a two-dimensional sql network, while TAA is a twofold interpenetrated framework with an ffc topology. They both exhibit a high Brunauer-Emmett-Teller surface area (324 and 689 m² g^-1 for Ni-TAP and Ni-TAA, respectively), a fairly good conductivity (1.57 × 10^-6 and 9.75 × 10^-5 S m^-1 for Ni-TAP and Ni-TAA, respectively), and high chemical stability (a stable pH window of 1-14 for Ni-TAA). When applied in lithium metal batteries as an intermediate layer for guiding the uniform Li electrodeposition, Ni-TAP and Ni-TAA displayed impressive lithiophilicity and high Li-ion conductivity, enabling the achievement of smooth and dense Li deposition with a clear columnar morphology and stable Li plating/stripping behaviors with high Li utilization, which is anticipated to pave the way to upgrade Li metal anodes for application in high-energy-density battery systems.

Three-Dimensional Crystalline Covalent Triazine Frameworks via a Polycondensation Approach

The growth of crystalline covalent triazine frameworks (CTFs) is still considered as a great challenge due to the less reversible covalent bonds of triazine linkages. The research studies of crystalline CTFs to date have been limited to two-dimensional (2D) structures, and the three-dimensional (3D) crystalline CTFs have never been reported before. Herein we report the design and synthesis of two 3D crystalline CTFs, termed 3D CTF-TPM and 3D CTF-TPA through a reversible/irreversible polycondensation approach. The targeted 3D CTFs adopt ctn topology, and show moderate crystallinity, relatively large surface area (ca. 2000 m²  g^-1 ), and high CO₂ uptake capacity (23.61 wt.%). Moreover, these 3D CTFs exhibit ultrastability in the presence of boiling water, strong acid (1 M HCl) and strong base (1 M NaOH). This contribution represents the first report of 3D crystalline CTFs, which not only extends their structural diversity but also offers a synthetic strategy and structural basis for expanding practical applications of CTF materials.

Biosensors for Caspase-3: From chemical methodologies to biomedical applications

Caspase-3 plays irreplaceable roles in apoptosis and related diseases. An imbalance in the measured levels of Caspase-3 is implicated in irreversible apoptosis. Therefore, the detection of Caspase-3 is of great significance for apoptosis imaging and the evaluation effect of early tumor treatment and other diseases. Herein, advances in the recent innovations of Caspase-3 response fluorescence biosensors, including molecular probes and nanoprobes, are systematically summarized in sections corresponding. The performances of various luminescence probes in Caspase-3 detection are discussed intensively in the design strategy of chemical structure, response mechanism and biological application. Finally, the current challenges and prospects of the design of new Caspase-3 responsive fluorescence probes for apoptosis imaging, or similar molecular event are proposed.

Three-Dimensional Triptycene-Functionalized Covalent Organic Frameworks with hea Net for Hydrogen Adsorption

Owing to the finite building blocks and difficulty in structural identification, it remains a tremendous challenge to elaborately design and synthesize three-dimensional covalent organic frameworks (3D COFs) with predetermined topologies. Herein, we report the first two cases of 3D COFs with the non-interpenetrated hea net, termed JUC-596 and JUC-597, by using the combination of tetrahedral and triangular prism building units. Due to the presence of triptycene functional groups and fluorine atoms, JUC-596 exhibits an exceptional performance in the H₂ adsorption up to 305 cm³  g^-1 (or 2.72 wt%) at 77 K and 1 bar, which is higher than previous benchmarks from porous organic materials reported so far. Furthermore, the strong interaction between H₂ and COF materials is verified through the DFT theoretical calculations. This work represents a captivating example of rational design of functional COFs based on a reticular chemistry guide and demonstrates its promising application in clean energy storage.

Gating Effects for Ion Transport in Three-Dimensional Functionalized Covalent Organic Frameworks

The development of bioinspired nano/subnano-sized (<2 nm) ion channels is still considered a great challenge due to the difficulty in precisely controlling pore's internal structure and chemistry. Herein, for the first time, we report that three-dimensional functionalized covalent organic frameworks (COFs) can act as an effective nanofluidic platform for intelligent modulation of the ion transport. By strategic attachment of 12-crown-4 groups to the monomers as ion-driver door locks, we demonstrate that gating effects of functionalized COFs can be activated by lithium ions. The obtained materials exhibit an outstanding selective ion transmission performance with a high gating ratio (up to 23.6 for JUC-590), which is among the highest values in metal ion-activated solid-state nanochannels reported so far. Furthermore, JUC-590 offers high tunability, selectivity, and recyclability of ion transport proved by the experimental and simulated studies.

Nonplanar Rhombus and Kagome 2D Covalent Organic Frameworks from Distorted Aromatics for Electrical Conduction

Two-dimensional (2D) covalent organic frameworks (COFs) are an emerging class of promising 2D materials with high crystallinity and tunable structures. However, the low electrical conductivity impedes their applications in electronics and optoelectronics. Integrating large π-conjugated building blocks into 2D lattices to enhance efficient π-stacking and chemical doping is an effective way to improve the conductivity of 2D COFs. Herein, two nonplanar 2D COFs with kagome (DHP-COF) and rhombus (c-HBC-COF) lattices have been designed and synthesized from distorted aromatics with different π-conjugated structures (flexible and rigid structure, respectively). DHP-COF shows a highly distorted 2D lattice that hampers stacking, consequently limiting its charge carrier transport properties. Conversely, c-HBC-COF, with distorted although concave-convex self-complementary nodes, shows a less distorted 2D lattice that does not interfere with interlayer π-stacking. Employing time- and frequency-resolved terahertz spectroscopy, we unveil a high charge-carrier mobility up to 44 cm² V^-1 s^-1, among the highest reported for 2D COFs.