Multiresidue pesticide analysis of agricultural commodities using acetonitrile salt-out extraction, dispersive solid-phase sample clean-up, and high-performance liquid chromatography-tandem mass spectrometry

Potential exposure of honey bees to neonicotinoid seed treatments in US rice

Neonicotinoid insecticide seed treatments are commonly used in rice (Oryza sativa) production to control rice water weevil (Lisorhoptrus oryzophilus). With the use of neonicotinoid seed treatments, there is potential that honey bees (Apis mellifera) could be exposed to neonicotinoids through translocation to the pollen. Studies were conducted in 2015 and 2016 to determine the level of neonicotinoids present in flag leaves, pollen, and grain of rice. Thiamethoxam was applied as a seed treatment and foliar prior to flooding. Clothianidin was applied as a seed treatment and as a foliar at a preflood and postflood timing. Subsamples of flag leaves, pollen, and grain were analyzed for positive neonicotinoid detections and abundance. Thiamethoxam was detected in 8.9% of samples and clothianidin was detected in 1.4% of samples. For both thiamethoxam and clothianidin, more positive samples were observed in flag leaf samples than in pollen or grain. An average of 4.30 ng/g of thiamethoxam was detected in flag leaves from seed-applied thiamethoxam. An average of 1.25 ng/g of clothianidin was found in flag leaves from a preflood application of clothianidin. A survey of honey bees present in rice fields was conducted in Mississippi and Arkansas to determine the abundance of honey bees present in rice fields based on the time of day. Honey bee densities were low in rice, with less than 5% and 3% positive detections observed in Mississippi and Arkansas, respectively. More positive detections and higher densities of honey bees were observed for mid-day sampling than for morning or evening sampling.

Optimizing the QuEChERS method for efficient monitoring of fipronil, thiobencarb, and cartap residues in paddy soils with varying properties

This study aims to optimize the QuEChERS methodology for extracting three pesticides (fipronil, thiobencarb, and cartap) from two paddy soils with distinct characteristics. Various modifications were explored to enhance extraction efficiency, employing acetonitrile (MeCN) or ethyl acetate (EtOAc) for extraction and primary-secondary amine (PSA) and graphitized carbon black (GCB) for the clean-up. Assessment criteria included accuracy, precision, linearity, detection limits, uncertainty, and matrix effects. Results revealed that the clayey soil with lower organic carbon (OC) content (1.26%) and 100% moisture yielded the highest pesticide recoveries (113.72%, 115.73%, and 116.41% for FIP, THIO, and CART, respectively). In contrast, the silty clayey soil with higher OC content (2.91%) and 20% water content exhibited poor recoveries (< 60%). FIP and CART demonstrated better recoveries with MeCN, while THIO performed better with EtOAc under specific moisture conditions. Clean-up sorbents significantly reduced FIP and CART recoveries, with THIO recoveries less affected. Acidifying with HCl substantially improved CART recovery. EtOAc introduced a moderate to strong matrix effect for FIP and THIO, while MeCN in soils with 100% moisture resulted in a strong matrix effect for CART. The study highlighted the substantial impact of extraction conditions, pesticide properties, and soil conditions on the outcomes of the QuEChERS method. A comprehensive understanding of these interplays was deemed crucial for accurately quantifying pesticide residues in agricultural soils.

Multiresidue extraction of current-use pesticides from complex solid matrices using energized dispersive guided extraction with analysis by gas and liquid chromatography tandem mass spectroscopy

The development of sample processing techniques that recover a broad suite of pesticides from solid matrices, while mitigating coextracted matrix interferences, and reducing processing time is beneficial for high throughput analyses. The objective of this study was to evaluate the effectiveness of an automated extraction system for pesticide analyses in solid environmental samples. An Energized Dispersive Guided Extraction (EDGE) system was used to evaluate two different extraction solvents in optimizing the extraction of 210 pesticides and pesticide transformation products. A graphitized carbon cleanup step was implemented, and three elution solvents were evaluated separately for analyte recoveries. Recoveries between 70 and 130% were achieved for 167 compounds in a test soil using acetonitrile as an extraction solvent and carbon cleanup with acetonitrile and dichloromethane elutions. Nine field samples (soil, sediment, and biosolids) were extracted using the newly developed method and were compared with a previously validated pressurized liquid extraction (PLE) method using an Accelerated Solvent Extraction (ASE) system. Concentrations obtained from the two methods were comparable (linear R² > 0.999), suggesting similar performance between the EDGE and PLE extractions in complex matrices. The new method provided slightly better sensitivities in comparison to the PLE method, ranging from 0.09 to 2.56 ng g^-1. The method presented here significantly reduces extraction setup and runtimes while also minimizing the volume of carcinogenic solvents (e.g., dichloromethane) used in the laboratory and presents a sensitive multiresidue method for a wide range of pesticides in solid matrices.

Validation and Simultaneous Monitoring of 311 Pesticide Residues in Loamy Sand Agricultural Soils by LC-MS/MS and GC-MS/MS, Combined with QuEChERS-Based Extraction

Soil can be contaminated by pesticide residues through agricultural practices, by direct application or through spray-drift in cultivations. The dissipation of those chemicals in the soil may pose risks to the environment and human health. A simple and sensitive multi-residue analytical method was optimized and validated for the simultaneous determination of 311 active substances of pesticides in agricultural soils. The method involves sample preparation with QuEChERS-based extraction, and determination of the analytes with a combination of GC-MS/MS and LC-MS/MS techniques. Calibration plots were linear for both detectors over the range of five concentration levels, using matrix-matched calibration standards. The obtained recoveries from fortified-soil samples ranged from 70 to 119% and from 72.6 to 119% for GC-MS/MS and LC-MS/MS, respectively, while precision values were <20% in all cases. As regards the matrix effect (ME), signal suppression was observed in the liquid chromatography (LC)-amenable compounds, which was further estimated to be negligible. The gas chromatography (GC)-amenable compounds showed enhancement in the chromatographic response estimated as medium or strong ME. The calibrated limit of quantification (LOQ) value was 0.01 μg g^-1 dry weight for most of the analytes, while the corresponding calculated limit of determination (LOD) value was 0.003 μg g^-1 d.w. The proposed method was subsequently applied to agricultural soils from Greece, and positive determinations were obtained, among which were non-authorized compounds. The results indicate that the developed multi-residue method is fit for the purpose of analyzing low levels of pesticides in soil, according to EU requirements.

Sample preparation techniques for suspect and non-target screening of emerging contaminants

The progress in sensitivity and resolution in mass spectrometers in recent years provides the possibility to detect a broad range of organic compounds in a single procedure. For this reason, suspect and non-target screening techniques are gaining attention since they enable the detection of hundreds of known and unknown emerging contaminants in various matrices of environmental, food and human sources. Sample preparation is a critical step before analysis as it can significantly affect selectivity, sensitivity and reproducibility. The lack of generic sample preparation protocols is obvious in this fast-growing analytical field, and most studies use those of traditional targeted analysis methods. Among them, solvent extraction and solid phase extraction (SPE) are widely used to extract emerging contaminants from solid and liquid sample types, respectively. Sequential solvent extraction and a combination of different SPE sorbents can cover a broad range of chemicals in the samples. Gel permeation chromatography (GPC) and adsorption chromatography, including acidification, are typically used to remove matrix components such as lipids from complex matrices, but usually at the expense of compound losses. Ideally, the purification of samples intended for non-target analysis should be selective of matrix interferences. Recent studies have suggested quality assurance/quality control measures for suspect and non-target screening, based on expansion and extrapolation of target compound lists, but method validations remain challenging in the absence of analytical standards and harmonized sample preparation approaches.

Quantitative determination of targeted and untargeted pesticide residues in coconut milk by liquid chromatography - Atmospheric pressure chemical ionization - high energy collisional dissociation tandem high-resolution mass spectrometry

Quantitative determination of targeted and untargeted pesticide residues from food products is very important for the assessment of safety of the food products. In the present work, a simple, selective and sensitive method based on liquid chromatography atmospheric pressure chemical ionization high energy collisional dissociation high-resolution tandem mass spectrometry (LC-APCI-HCD-HRMS/MS) for quantification of 19 priority organophosphorus and carbamate pesticides and 10 untargeted pesticides from coconut milk samples was developed and validated. The pesticide residues were extracted by solvent partition followed by dispersive solid-phase extraction clean-up and quantified by LC-APCI-HRMS/MS technique. The method showed the linearity for targeted pesticides in the range of 0.5-1000 ng/g with a limit of detection of ranging 0.5-5 ng/g and limit of quantification of ranging 1-10 ng/g measured at 3:1 and 10:1 signal to noise ratios, respectively. The untargeted pesticide residues were quantified by the response factor method. The method was validated for intraday and interday precision, which was less than 15%. The recovery of the analytes varied between 82 and 117%, and the developed method was applied for the analysis of the coconut milk samples. The analyzed samples showed the presence of quinalphos, malathion, and methiocarb at concentrations of 4.55, 5.54, and 206.99 ng/g.

Multilaboratory Collaborative Study of a Nontarget Data Acquisition for Target Analysis (nDATA) Workflow Using Liquid Chromatography-High-Resolution Accurate Mass Spectrometry for Pesticide Screening in Fruits and Vegetables

Nontarget data acquisition for target analysis (nDATA) workflows using liquid chromatography-high-resolution accurate mass (LC-HRAM) spectrometry, spectral screening software, and a compound database have generated interest because of their potential for screening of pesticides in foods. However, these procedures and particularly the instrument processing software need to be thoroughly evaluated before implementation in routine analysis. In this work, 25 laboratories participated in a collaborative study to evaluate an nDATA workflow on high moisture produce (apple, banana, broccoli, carrot, grape, lettuce, orange, potato, strawberry, and tomato). Samples were extracted in each laboratory by quick, easy, cheap, effective, rugged, and safe (QuEChERS), and data were acquired by ultrahigh-performance liquid chromatography (UHPLC) coupled to a high-resolution quadrupole Orbitrap (QOrbitrap) or quadrupole time-of-flight (QTOF) mass spectrometer operating in full-scan mass spectrometry (MS) data-independent tandem mass spectrometry (LC-FS MS/DIA MS/MS) acquisition mode. The nDATA workflow was evaluated using a restricted compound database with 51 pesticides and vendor processing software. Pesticide identifications were determined by retention time (t_R, ±0.5 min relative to the reference retention times used in the compound database) and mass errors (δ_M) of the precursor (RTP, δ_M ≤ ±5 ppm) and product ions (RTPI, δ_M ≤ ±10 ppm). The elution profiles of all 51 pesticides were within ±0.5 min among 24 of the participating laboratories. Successful screening was determined by false positive and false negative rates of <5% in unfortified (pesticide-free) and fortified (10 and 100 μg/kg) produce matrices. Pesticide responses were dependent on the pesticide, matrix, and instrument. The false negative rates were 0.7 and 0.1% at 10 and 100 μg/kg, respectively, and the false positive rate was 1.1% from results of the participating LC-HRAM platforms. Further evaluation was achieved by providing produce samples spiked with pesticides at concentrations blinded to the laboratories. Twenty-two of the 25 laboratories were successful in identifying all fortified pesticides (0-7 pesticides ranging from 5 to 50 μg/kg) for each produce sample (99.7% detection rate). These studies provide convincing evidence that the nDATA comprehensive approach broadens the screening capabilities of pesticide analyses and provide a platform with the potential to be easily extended to a larger number of other chemical residues and contaminants in foods.

Optimization and validation of a QuEChERS-based method for the simultaneous environmental monitoring of 218 pesticide residues in clay loam soil

A modified QuEChERS method was optimized, validated and verified for the extraction of 218 pesticide residues in agricultural soil samples. The 218 analytes are extracted using a single step, without clean-up, with matrix-matched calibration, and two complementary techniques: liquid and gas chromatography tandem triple quad mass spectrometry (LC-MS/MS and GC-MS/MS). Some of the parameters such as salts, acidity of the extraction solvent, sample moisture and some mechanical changes in the procedure were optimized to improve the overall performance for the target compounds and the soil matrix. The method was fully validated on a representative agricultural soil sample of the Canary Islands (clay loam soil) in terms of linearity, accuracy and precision. To avoid matrix effects, matrix-matched calibration curves (R² ≥ 0.99) were used for all target analytes. 100% of the compounds can be quantified with limits of quantification (LOQ) lower than the limit typically used in soils (50 ng g^-1), with 92% of compounds presenting a LOQ that is at least 10 times lower than that normally required. The limits of detection (LOD) ranged between 0.024 and 6.25 ng g^-1. The validated method was applied to a series of actual samples of agricultural soil (n = 18). In addition, as a further verification of its potential, the results of the application of the method in the investigation of clay loam soil samples that were obtained from underneath wildlife carcasses in the context of an environmental forensic investigation are also presented.

High-throughput multi-residue quantification of contaminants of emerging concern in wastewaters enabled using direct injection liquid chromatography-tandem mass spectrometry

A rapid quantitative method for 135 contaminants of emerging concern (CECs) in untreated wastewater enabled with direct injection liquid chromatography-tandem mass spectrometry is presented. All compounds were analysed within 5 min on a short biphenyl cartridge using only 10 μL of filtered sample per injection. Up to 76 compounds were monitored simultaneously during the gradient (including mostly two transitions per compound and stable isotope-labelled analogues) while yielding >10 data points per peak. Evaluation of seven solid phase extraction sorbents showed no advantage for wastewater matrix removal. Excellent linearity, range, accuracy and precision was achieved for most compounds. Matrix effects were <11 % and detection limits were <30 ng L^-1 on average. Application to untreated wastewater samples from three wastewater treatment works in the UK, USA and Mexico, enabled quantification of 56 compounds. Banned and EU 'watch-list' substances are critically discussed, including pesticides, macrolide antibiotics, diclofenac, illicit drugs as well as multiple pharmaceuticals and biocides. This high-throughput method sets a new standard for the speedy and confident determination of over a hundred CECs in wastewater at the part-per-trillion level, as demonstrated by performing over 260 injections per day.

Triple-dimensional spectroscopy combined with chemometrics for the discrimination of pesticide residues based on ionic liquid-stabilized Mn-ZnS quantum dots and covalent organic frameworks

Manganese-doped zinc sulfide quantum dots (Mn-ZnS QDs) are promising candidates for multi-channel sensing analysis due to their multi-dimensional optical properties. In this study, we integrated amino-silane and ionic liquid co-modified Mn-ZnS QDs and covalent organic frameworks (COFs) into optosensing nanoparticles to provide triple-dimensional optical response signals and combined them with chemometrics for the analysis of multiple pesticide residues. Through the exploration and optimization of a series of conditions, fluorescence, room temperature phosphorescence, and ultraviolet-visible combined with chemometrics were used for the discrimination and recognition of multiple pesticide residues in fruits and vegetables. The ionic liquid of 1-vinyl-3-ethylimidazolium tetrafluoroborate was used to modify Mn-ZnS QDs to improve the optical response and enrichment of pesticide adsorption sites, which were also synergistically enhanced by the COF support. This is a potential method to discriminate pesticides efficiently and enables fast and reliable analysis of pesticides in the agricultural and food industries.

Multiresidue pesticide quantitation in multiple fruit matrices via automated coated blade spray and liquid chromatography coupled to triple quadrupole mass spectrometry

Application of ambient mass spectrometry techniques to accelerate analysis of pesticides in produce, with technique validation via chromatographic separation, has not been explored extensively. In this work, coated blade spray (CBS) was used to provide freedom of instrumental choice for a multiresidue panel of pesticides in apple, blueberry, grape, and strawberry through direct-coupling with mass spectrometry (MS) and liquid chromatographic (LC) analyses. For all four matrices, >125 compounds were found to meet European Union guidelines concerning linearity, precision, and accuracy while both CBS-MS/MS and SPME-LC-MS/MS methods achieved limits of quantitation below their minimum regulatory limits. Additionally, results for samples containing residues (n = 57) yielded good agreement between instrumental methods (percent differences < 20% for 73% residues), supporting CBS as a stand-alone technique or complement to LC confirmation of pesticides in fruit matrices.

Rapid Determination of 17 Phthalate Esters in Capsanthin by QuEChERS Coupled with Gas Chromatography-Mass Spectrometry

A method for the simultaneous determination of 17 kinds of phthalate esters in capsanthin was developed by the QuEChERS (quick, easy, cheap, effective, ruggedand safe) pretreatment method coupled with gas chromatography-mass spectrometry(GC-MS). Capsanthin samples were extracted with acetonitrile, and then sodium chloride and anhydrous magnesium sulfate were added for salting out. After the extracting liquids were cleansed by florisil, the supernatants were analyzed by GC-MS. The limits of detection (LOD) and limits of quantitation (LOQ) ranged from 0.2 to 0.5 μg/g and 0.6 to 1.5 μg/g, respectively. DMP, DEP, DAP, DIBP, DBP, BMPP, DPP, DHXP and DCHP were in the range of 0.2 - 10 μg/g; DMEP, DEEP, BBP, DBEP, DEHP, DPhP, DNOP and DNP were in the range of 0.5 - 20 μg/g. And all had good linearity and the linear correlation coefficients (R²) were more than 0.995. The average recoveries of 17 kinds of PAEs of the three levels were between 82.8 and 118.1%, and the relative standard deviations (RSDs) were between 0.12 and 7.3%. It is a simple, rapid, accurate and reliable method for the rapid detection of PAEs in large quantities of natural plant extract samples.

LC-MS/MS method optimization and validation for trace-level analysis of 71 crop protection chemicals in pulses

An analytical method involving modified QuEChERS (quick, easy, cheap, effective, rugged and safe) technique coupled with LC-MS/MS (liquid chromatography-tandem mass spectroscopy) has been developed for simultaneous identification and quantification of 71 pesticides (insecticides/acaricides/nematicides (32), fungicides (12), herbicides (26), plant growth regulator (1)) in different pulses (edible seeds of leguminous plants), namely gram, lentil, black gram and pea. The analysis was done using Shimadzu LC-MS/MS-8030 instrument equipped with Zorbax Eclipse Plus C-18 column operating under electrospray ionization (ESI) in positive and negative modes. Validation of method was done as per a single laboratory validation approach. Nine-point linear calibration curves for each pesticide were obtained in the range of 0.005 to 2 μg/g with correlation coefficient of ≥ 0.98. Limit of detection (LOD) for all the pesticides was achieved in the range of 0.001-0.015 μg/g, whereas the limit of quantification (LOQ) were found in the range of 0.01-0.05 μg/g. Recovery studies were conducted at 0.01- and 0.05-μg/g level of fortification using modified buffered QuEChERS method standardized for low moisture foods. It was observed that due to matrix interference, only around 75% of the pesticides were recovered in an acceptable range of 70-120% when compared against the solvent standard. With matrix-matched standards, 95% of the recovery results came within acceptable range with highly acceptable HorRat ratio (between 0.2 and 0.8) indicating satisfactory precision. The global and expanded uncertainties for estimation of each pesticide in above-mentioned pulse matrices were calculated to evaluate the suitability of the developed method for quantification of pesticides in pulse matrices.

Determination of cephalexin residual level using ultra-high-performance liquid chromatography-tandem mass spectrometry: Residue depletion study in swine

An ultra-high-performance liquid chromatography-tandem mass spectrometry method was developed to analyze cephalexin in swine tissues, urine, and feces. Samples were extracted with 1% sulfuric acid, followed by purification using MCX cartridges. Mean recoveries were 95.4%-100.7% with inter-day relative standard deviations of <8.6%. The quantitation limit was 5 μg/kg for fat and urine, and 10 μg/kg for muscle, liver, kidney, and feces. Cephalexin residue depletion was determined using 32 healthy pigs, randomly divided into eight (seven treated and one control) groups. Treated groups were intramuscularly administered 10 mg/kg b.w. five times at 24-h intervals and euthanized 6 h and 1, 2, 3, 5, 7, and 10 days after the last injection. Cephalexin was eliminated rapidly in swine muscle, liver, fat, and feces. The highest concentrations among edible organs were detected in the kidney. Moreover, the longest elimination period of cephalexin in swine was determined in urine. These results indicated that kidney and urine were likely target matrices for cephalexin residue detection in swine.

Comparison of electrospray and UniSpray, a novel atmospheric pressure ionization interface, for LC-MS/MS analysis of 81 pesticide residues in food and water matrices

In mass spectrometry, the type and design of ionization source play a key role on the performance of a given instrument. Therefore, it is of paramount importance to evaluate newly developed sources for their suitability to analyze food contaminants like pesticide residues. Here, we carried out a head-to-head comparison of key extraction and analytical performance parameters of an electrospray ionization (ESI) source with a new atmospheric pressure ionization source, UniSpray (US). The two interfaces were evaluated in three matrices of different properties (coffee, apple, and water) to determine if multiresidue analysis of 81 pesticides by QuEChERS extraction and LC-MS/MS analysis could be improved. Depending on the matrix and irrespective of the chemical class, US provided a tremendous gain in signal intensity (22- to 32-fold in peak area, 6- to 7-fold in peak height), a threefold to fourfold increase in signal-to-noise ratio, a mild gain in the range of compounds that can be quantified, and up to twofold improvement of recovery. UniSpray offered comparable linearity and precision of the analyses with ESI, and did not affect the ion ratio. A gain in sensitivity of many compounds was observed with US, but in general, the two ionization interfaces did not show significant difference in LOD and LOQ. UniSpray suffered less signal suppression; the matrix effect was in average 3 to 4 times more pronounced, but showed better values than ESI. With no effect on recovery efficiency, US improved the overall process efficiency 3 to 4 times more than ESI. Graphical abstract.

Simultaneous determination of 58 pesticides and relevant metabolites in eggs with a multi-functional filter by ultra-high performance liquid chromatography-tandem mass spectrometry

A sensitive method for the simultaneous determination of 58 pesticides and relevant metabolites in eggs was developed using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) after clean-up with a multi-functional filter (MFF) based on quick, easy, cheap, effective, rugged, and safe method (QuEChERS). The egg sample was extracted with 5 ml water and 10 ml 1% acetic acid in acetonitrile and then salt out with sodium chloride. The extracted solution was filtered directly through an MFF containing 50 mg PSA, 50 mg C18, and 150 mg magnesium sulphate before UHPLC-MS/MS analysis. The clean-up and filter procedures were integrated using the MFF to substantially improve the work efficiency. Good linearity was shown for each analyte, and all the correlation coefficients exceeded 0.99. The recoveries in the eggs at the five spiked levels were 74.4%-115.2%, and the relative standard deviations (RSDs) were less than 15.3%. The limit of detection (LOD) and the limit of quantitation (LOQ) of 58 pesticides and 8 metabolites in eggs were 0.1-1.0 μg/kg and 0.2-5.0 μg/kg, respectively. The decision limit (CCα) and detection capacity (CCβ) were 3.4-111.1 μg/kg and 6.8-122.1 μg/kg, respectively. This method has also been successfully applied in the determination of actual eggs samples. This developed method is more effective and faster in the monitoring of pesticide residue in eggs compared to the traditional analytical method.

Perspectives on Liquid Chromatography-High-Resolution Mass Spectrometry for Pesticide Screening in Foods

This perspective discusses the use of liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS) for multiresidue analysis of pesticides in foods and agricultural commodities. HRMS has the important distinction and advantage of mass-resolving power and, therefore, requires different concepts, experiments, and guidance for screening, identification, and quantitation of pesticides in complex food matrices over triple quadrupole mass spectrometry. HRMS approaches for pesticide screening, including full-scan experiments in conjunction with tandem mass spectrometry (MS/MS) experiments, are described. This approach results in the generation of chromatographic retention times and high-resolution mass spectra with accurate mass measurements that can be used to create compound databases. New data processing tools can create an efficient and optimized screening approach that can speed the analysis and identification of compounds, reduce the need for chemical standards, and harmonize pesticide analytical procedures.

Multiresidue Method for Quantification of Sulfonamides and Trimethoprim in Tilapia Fillet by Liquid Chromatography Coupled to Quadrupole Time-of-Flight Mass Spectrometry Using QuEChERS for Sample Preparation

A multiresidue method for detecting and quantifying sulfonamides (sulfapyridine, sulfamerazine, sulfathiazole, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfamethoxypyridazine) and trimethoprim in tilapia fillet (Oreochromis niloticus) using liquid chromatography coupled to mass spectrometry was developed and validated. The sample preparation was optimized using the QuEChERS approach. The chromatographic separation was performed using a C18 column and 0.1% formic acid in water and acetonitrile as the mobile phase in the isocratic elution mode. Method validation was performed based on the Commission Decision 2002/657/EC and Brazilian guideline. The validation parameters evaluated were linearity (r ≥ 0.99); limits of detection (LOD) and quantification (LOQ), 1 ng·g^-1 and 5 ng·g^-1, respectively; intraday and interdays precision (CV lower than 19.4%). The decision limit (CCα 102.6-120.0 ng·g^-1 and 70 ng·g^-1 for sulfonamides and trimethoprim, respectively) and detection capability (CCβ 111.7-140.1 ng·g^-1 and 89.9 ng·g^-1 for sulfonamides and trimethoprim, respectively) were determined. Analyses of tilapia fillet samples from fish exposed to sulfamethazine through feed (incurred samples) were conducted in order to evaluate the method. This new method was demonstrated to be fast, sensitive, and suitable for monitoring sulfonamides and trimethoprim in tilapia fillet in health surveillance programs, as well as to be used in pharmacokinetics and residue depletion studies.

Large-Scale Membrane- and Lignin-Modified Adsorbent-Assisted Extraction and Preconcentration of Triazine Analogs and Aflatoxins

The large-scale simultaneous extraction and concentration of aqueous solutions of triazine analogs, and aflatoxins, through a hydrocarbon-based membrane (e.g., polyethylene, polyethylene/polypropylene copolymer) under ambient temperature and atmospheric pressure is reported. The subsequent adsorption of analyte in the extraction chamber over the lignin-modified silica gel facilitates the process by reducing the operating time. The maximum adsorption capacity values for triazine analogs and aflatoxins are mainly adsorption mechanism-dependent and were calculated to be 0.432 and 0.297 mg/10 mg, respectively. The permeation, and therefore the percentage of analyte extracted, ranges from 1% to almost 100%, and varies among the solvents examined. It is considered to be vapor pressure- and chemical polarity-dependent, and is thus highly affected by the nature and thickness of the membrane, the discrepancy in the solubility values of the analyte between the two liquid phases, and the amount of adsorbent used in the process. A dependence on the size of the analyte was observed in the adsorption capacity measurement, but not in the extraction process. The theoretical interaction simulation and FTIR data show that the planar aflatoxin molecule releases much more energy when facing toward the membrane molecule when approaching it, and the mechanism leading to the adsorption.

Influence of QuEChERS modifications on recovery and matrix effect during the multi-residue pesticide analysis in soil by GC/MS/MS and GC/ECD/NPD

A QuEChERS extraction followed by GC/MS/MS and GC-μECD/NPD for 216 pesticide and metabolites determination in soil simultaneously were developed and compared. Volume of water, volume and polarity of solvent, and cleanup sorbents (C18, GCB, PSA) were optimized. The QuEChERS with and without purification step were applied to estimate effectiveness of the method. The recovery and matrix effect (ME) were critical parameters within each tested procedure. The optimal method without cleanup was validated. Accuracy (expressed as recovery), precision (expressed as RSD), linearity, LOQ, and uncertainty were determined. The recoveries at the three spiking levels using matrix-matched standards ranged between 65 and 116% with RSD ≤17 and 60-112% with RSD ≤18% for MS/MS and μEC/NP, respectively. The LOQ ranged from 0.005-0.01 mg/kg for MS/MS to 0.05 mg/kg for μEC/NP. The ME for most of pesticides resulted in enhancement of the signal and depended on the analyte and detection system: MS/MS showed ME from -25 to 74%, while μEC/NP from -45 to 96%. A principal component analysis was performed to explain the relationships between physicochemical parameters and ME of 216 pesticides. The QuEChERS protocol without the cleanup step is a promising option to make the method less expensive and faster. This methodology was applied in routine analysis of 263 soil samples in which p,p' DDT was the most frequently detected (23.5% of samples) and pendimethalin with the highest concentration (1.63 mg/kg).

Dynamics of difenoconazole and propiconazole residues on pomegranate over 2 years under field conditions

Residue dynamics of difenoconazole and propiconazole on pomegranate was studied after application at the recommended and double doses of 125 and 250 g active ingredient (a.i.) ha(-1) during August-October 2012. The study was repeated during the same period in 2013. QuEChERS method, in conjunction with gas chromatography (GC), was used for analysis of the fungicides after carrying out the method validation. The recoveries of the fungicides from pomegranate and soil were between 80.3 and 96.2 %; the limit of detection (LOD) and limit of quantification (LOQ) were 0.016 and 0.05 mg kg(-1), respectively. The uncertainties of measurement were between 9.7 and 16.3 %. The initial residue deposits of difenoconazole were 0.875 and 1.205 mg kg(-1) from treatment at the recommended dose and 1.54 and 1.672 mg kg(-1) from treatment at the double dose from the first- and second-year studies. Propiconazole residues were 0.663 and 0.864 mg kg(-1) from recommended dose treatments and 1.474 and 2.045 mg kg(-1) from double dose treatments from the first- and second-year studies. The half-lives of degradation of difenoconazole were 6.4-8.4 days and propiconazole 7.9-8.5 days over the 2 years. Residues of difenoconazole and propiconazole remained on the pomegranate fruit surface and did not move to the edible part (aril). The pre-harvest intervals (PHIs), the time required for the residues to reduce below their respective EU maximum residue limits (MRLs), were 25.4 and 30.8 days for difenoconazole and 33.3 and 43.8 days for propiconazole from treatments at the recommended and double doses, respectively. Keeping in view consumer safety, the longer PHI from the two studies has been selected.

A batch correction method for liquid chromatography-mass spectrometry data that does not depend on quality control samples

The need for reproducible and comparable results is of increasing importance in non-targeted metabolomic studies, especially when differences between experimental groups are small. Liquid chromatography-mass spectrometry spectra are often acquired batch-wise so that necessary calibrations and cleaning of the instrument can take place. However this may introduce further sources of variation, such as differences in the conditions under which the acquisition of individual batches is performed. Quality control (QC) samples are frequently employed as a means of both judging and correcting this variation. Here we show that the use of QC samples can lead to problems. The non-linearity of the response can result in substantial differences between the recorded intensities of the QCs and experimental samples, making the required adjustment difficult to predict. Furthermore, changes in the response profile between one QC interspersion and the next cannot be accounted for and QC based correction can actually exacerbate the problems by introducing artificial differences. "Background correction" methods utilise all experimental samples to estimate the variation over time rather than relying on the QC samples alone. We compare non-QC correction methods with standard QC correction and demonstrate their success in reducing differences between replicate samples and their potential to highlight differences between experimental groups previously hidden by instrumental variation.

Residue evaluation of imidacloprid, spirotetramat, and spirotetramat-enol in/on grapes (Vitis vinifera L.) and soil

A combination of imidacloprid and spirotetramat effectively controls sucking pests on grapevines. Residues of these insecticides on grapes were evaluated after treatment with spirotetramat 12% + imidacloprid 12% (240 SC) three times at 90 and 180 g a.i. ha(-1). The samples were extracted and purified by QuEChERS method and analyzed by high-performance liquid chromatography with a photodiode array detector (imidacloprid) and gas chromatography mass spectrometry (spirotetramat and its metabolite spirotetramat-enol). Satisfactory results were obtained with ranges of 80.6-98.6% for the recovery, 3.1-10% for the relative standard deviation range, and 9.8-15.6% for the uncertainty. The limits of detection and quantification were 0.015 μg mL(-1) and 0.05 mg kg(-1), respectively. Initial residue concentrations of imidacloprid after the 90 and 180 g a.i. ha(-1) treatments were 0.912 (half-life 11 days) and 1.681 mg kg(-1) (half-life 12.4 days), respectively. For spirotetramat + spirotetramat-enol, the residue concentrations were 1.337 (half-life 5.6 days) and 2.0 mg kg(-1) (half-life 7.6 days) for the 90 and 180 g a.i. ha(-1) treatments, respectively. Spirotetramat degraded faster than spirotetramat-enol. After treatment at 90 g a.i. ha(-1), the initial residues of both insecticides were within European Union maximum residue limits and a 1-day pre-harvest interval (PHI) was adequate for safe consumption of grapes. After treatment at 180 g a.i. ha(-1), the required PHI was 7 day. Therefore, a PHI of 7 day should be used after treatment with imidacloprid and spirotetramat.

Dynamic microwave assisted extraction coupled with dispersive micro-solid-phase extraction of herbicides in soybeans

Non-polar solvent dynamic microwave assisted extraction was firstly applied to the treatment of high-fat soybean samples. In the dispersive micro-solid-phase extraction (D-µ-SPE), the herbicides in the high-fat extract were directly adsorbed on metal-organic frameworks MIL-101(Cr). The effects of several experimental parameters, including extraction solvent, microwave absorption medium, microwave power, volume and flow rate of extraction solvent, amount of MIL-101(Cr), and D-µ-SPE time, were investigated. At the optimal conditions, the limits of detection for the herbicides ranged from 1.56 to 2.00 μg kg(-1). The relative recoveries of the herbicides were in the range of 91.1-106.7%, and relative standard deviations were equal to or lower than 6.7%. The present method was simple, rapid and effective. A large amount of fat was also removed. This method was demonstrated to be suitable for treatment of high-fat samples.

Non-targeted screening approaches for contaminants and adulterants in food using liquid chromatography hyphenated to high resolution mass spectrometry

The majority of analytical methods for food safety monitor the presence of a specific compound or defined set of compounds. Non-targeted screening methods are complementary to these approaches by detecting and identifying unexpected compounds present in food matrices that may be harmful to public health. However, the development and implementation of generalized non-targeted screening workflows are particularly challenging, especially for food matrices due to inherent sample complexity and diversity and a large analyte concentration range. One approach that can be implemented is liquid chromatography coupled to high-resolution mass spectrometry, which serves to reduce this complexity and is capable of generating molecular formulae for compounds of interest. Current capabilities, strategies, and challenges will be reviewed for sample preparation, mass spectrometry, chromatography, and data processing workflows. Considerations to increase the accuracy and speed of identifying unknown molecular species will also be addressed, including suggestions for achieving sufficient data quality for non-targeted screening applications.

Matrix solid-phase dispersion coupled with magnetic ionic liquid dispersive liquid-liquid microextraction for the determination of triazine herbicides in oilseeds

A novel method was developed for the determination of six triazine herbicides from oilseeds by matrix solid-phase dispersion combined with magnetic ionic liquid dispersive liquid-liquid microextraction (MSPD-MIL-DLLME), followed by ultrafast liquid chromatography with ultraviolet detection (UFLC-UV). The MIL, 1-butyl-3-methylimidazolium tetrachloroferrate ([C4mim][FeCl4]), was used as the microextraction solvent to simplify the extraction procedure by magnetic separation. The effects of several important experimental parameters, including type of dispersant, ratio of sample to dispersant, type and volume of collected elution solvent, type and volume of MIL, were investigated. Using the present method, UFLC-UV gave the limits of detection (LODs) of 1.20-2.72 ng g(-1) and the limits of quantification (LOQs) of 3.99-9.06 ng g(-1) for triazine herbicides. The recoveries were ranged from 82.9 to 113.7% and the relative standard deviations (RSDs) were equal or lower than 7.7%. The present method is easy-to-use and effective for extraction of triazine herbicides from oilseeds and shows the potentials of practical applications in the treatment of the fatty solid samples.

Effect of sample dilution on matrix effects in pesticide analysis of several matrices by liquid chromatography-high-resolution mass spectrometry

This study used two LC columns of different adsorbents and liquid chromatography-electrospray ionization-high-resolution mass spectrometry to study the relationship between matrix effects (ME), the LC separations, and elution patterns of pesticides and those of matrix components. Using calibration standards of 381 pesticides at three dilution levels of 1×, 1/10×, and 1/100×, 108 samples were prepared in solvent and five different sample matrices for the study. Results obtained from principal component analysis and slope ratios of calibration curves provided measurements of the ME and showed the 1/100× sample dilution could minimize suppression ME for most pesticides analyzed. Should a pesticide coeluting with matrix components have a peak intensity of 25 times or higher, the suppression for that pesticide would persist even at 1/100× dilution. The number of pesticides had enhancement ME increased with increasing dilution from 1× to 1/100×, with those early eluting, hydrophilic pesticides affected the most.

High-throughput simultaneous analysis of pesticides by supercritical fluid chromatography coupled with high-resolution mass spectrometry

Recently, a generally applicable screening method for multiresidue pesticide analysis, which is simple, quick, and accurate and has a reliable performance, is becoming increasingly important for food safety and international trade. This paper proposes a high-throughput screening methodology that enables the detection of multiresidue pesticides using supercritical fluid chromatography coupled to a high-performance benchtop quadrupole Orbitrap mass spectrometry (SFC/Q Exactive) and an automated library-based detection. A total of 444 chemicals covering a wide polarity range (logPow from -4.2 to 7.7) and a wide molecular weight range (from 99.0 to 872.5) were analyzed simultaneously through a combination of high mass resolution (a value of m/Δm = 70000), high mass accuracy (<5 ppm) with positive/negative polarity switching, and highly efficient separation by SFC. A total of 373 pesticides were detected in QuEChERS spinach extracts without dispersive solid phase extraction at the 10 μg kg(-1) level (provisional maximum residue limits in Japan). In conclusion, the developed analytical system is a potentially useful tool for practical multiresidue pesticide screening with high throughput (time for data acquisition, 72 samples per day; and time for data processing of 72 samples, approximately 45 min).

Residue levels and dissipation behaviors for trifloxystrobin and tebuconazole in mango fruit and soil

An evaluation of residue levels of trifloxystrobin and tebuconazole was carried out on mango fruits after treatments with the combined formulation, trifloxystrobin (25 % w/w) and tebuconazole (50 % w/w), at standard and double doses of 250 + 500 and 500 + 1000 g a.i. ha(-1), respectively. Extraction and purification of the mango fruit samples were carried out by the QuEChERS method after validating the analytical parameters. Determination of the fungicides was carried out by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). The limits of detection (LOD) and limits of quantification (LOQ) for both fungicides were 0.015 μg mL(-1) and 0.05 mg kg(-1), respectively. The residue levels of trifloxystrobin for standard and double-dose treatments were 0.492 and 0.901 mg kg(-1) and for tebuconazole were 0.535 and 1.124 mg kg(-1), respectively. A faster dissipation of tebuconazole in mango fruit was observed compared with that for tebuconazole. Dissipation of trifloxystrobin and tebuconazole in mango followed first-order kinetics, and the half-lives were 9 and 6 days, respectively. The preharvest intervals (PHI), the time taken for the combined residues of trifloxystrobin and tebuconazole to dissipate to their permissible levels (maximum residue limits), were 14 and 20 days for standard and double doses, respectively. At harvest, mature mango fruit and soil were free from fungicide residues.

Multi-residue method for determination of 238 pesticides in Chinese cabbage and cucumber by liquid chromatography-tandem mass spectrometry: comparison of different purification procedures

This paper describes the comparison of five sample cleanup procedures for the determination of 238 pesticides via triple quadrupole liquid chromatography-tandem mass spectrometry (LC-MS/MS, with only 10 min of chromatographic running time) in Chinese cabbage and cucumber. Samples were extracted with a quick, easy, cheap, effective, rugged, and safe (QuECHERS) preparation method and cleanup with different sorbents, including primary secondary amine (PSA), multi-walled carbon nanotubes (MWCNTs), and polystyrene (PLS), to find out the most suitable cleanup methods for Chinese cabbage and cucumber. The recovery and matrix effect were evaluated by monitoring the main parameters in one group of 238 pesticides at the spiked level of 8 and 40 μg/kg. In Chinese cabbage, when PSA dispersive solid-phase extraction (D-SPE) was applied, recoveries of 183 pesticides ranged between 70 and 120% with relative standard deviation (RSD) values lower than 20% at a spiked level of 40 μg/kg, indicating the effectiveness of the purification step. In cucumber, 203 pesticides were in the 70-120% recovery range with good reproducibility by PSA mini-cartridge column cleanup at a spiked level of 40 μg/kg and RSD values were generally below 20%. The limits of quantitation [LOQs; signal-to-noise (S/N) = 10] were in the range of 0.16-10.20 μg/kg for Chinese cabbage and 0.06-21.06 μg/kg for cucumber, while the limits of detection (LODs; S/N = 3) were between 0.05 and 3.06 μg/kg and between 0.02 and 6.32 μg/kg in Chinese cabbage and cucumber, respectively. The proposed methods that might be applied for the multi-residue analysis in Chinese cabbage and cucumber are contributed to their rapid speed and good recoveries.